Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of
the recipeutils equivalents, and replace any local duplicate
implementations. This not only tidies up the code but also allows these
calls to work in memres mode.
(From OE-Core rev: f13b56266ee96dfab65a3a7db50e8051aa9f071a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
(From OE-Core rev: 1875ea92546d23abcab1b40b562477a0016f712d)
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
(From OE-Core rev: f40662bde5aab158c4e4c3c3ff5e68665a4194a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
(From OE-Core rev: 765a9017eaf77ea3204fb10afb8181629680bd82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
(From OE-Core rev: 041212fa37bb83acac5ce4ceb9b7b77ad172c5c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Certain recipes cannot be used with devtool extract / modify / upgrade -
usually because they don't provide any source. Return a specific exit
code (4) so that scripts such as scripts/contrib/devtool-stress.py know
the difference between this and a genuine failure.
(From OE-Core rev: ffd295fed4ab81fc0bd00bb145ef4d72c49584bf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved call of decode('utf-8') as close as possible to
call of subprocess API to avoid calling it in a lot of
other places.
Decoded binary data to utf-8 where appropriate to fix devtool
and recipetool tests in python 3 environment.
(From OE-Core rev: 30d02e2aa2d42fdf76271234b2dc9f37bc46b250)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 doesn't have basestring type as all string
are unicode strings.
(From OE-Core rev: e8cfab060f4ff3c4c16387871354d407910e87aa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you need to set EXTRA_OECONF for a recipe, you need to know what
options the configure script actually supports; the configure script
however is only accessible from within a devshell and (at least in the
case of autotooled software fetched from an SCM repository) may not
actually exist until do_configure has run. Thus, provide a "devtool
configure-help" subcommand that runs the configure script for a recipe
with --help and shows you the output through a pager (e.g. less),
prefaced by a header describing the current options being specified.
There is basic support for autotools, cmake and bare configure scripts.
The cmake support is a little hacky since cmake doesn't really have a
concise help option that lists user-defined knobs (without actually
running through the configure process), however that being a design
feature of cmake there's not much I can think of to do about that at
the moment.
(From OE-Core rev: 0e5d84d9705091b338000ef02720cfa090f76888)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
(From OE-Core rev: 25dc5ac42c9da53c01416e7fdcc819d729281133)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
(From OE-Core rev: e1bf6a30679a83d4dbcf37276204f639541e95f9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're repeating this in a couple of places, so we might as well have a
function to do it.
(From OE-Core rev: 67a28109a1ee1383d1b17a8dafa4fe510948238b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is just belt-and-braces but we ought to use try..finally in this
kind of situation, so just do it.
(From OE-Core rev: a30b407474d4eb6620f1ec549b54187ebbaff008)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
(From OE-Core rev: b54796d013c562972e962126400503085281b425)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
(From OE-Core rev: a3bb5bd25b72bd1bcc156dabd0ffa2d9184bb160)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
(From OE-Core rev: 05060699e63cd25d089e83e9aa56c11d5baa8fd8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
(From OE-Core rev: 2dd865086c37c9eff63c6d0bbfa9f2e909f9fffe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
(From OE-Core rev: 320585b7ff6340df0b0dbc63f95ed3ca8fc3a993)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
(From OE-Core rev: d2bb9f08303bb120e811c03af2f5339e8f262cfa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
(From OE-Core rev: 0c3f289576a2ab35b1d1d8854d6763553cc3bf09)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 69c63728da.
Moved add_md5 back to standard.py as it's not used in
any plugin anymore.
(From OE-Core rev: 3823b7abf8c1e82e0448d7283de95422fd262135)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved standard.py:_parse_recipe -> __init__.py:parse_recipe and
standard.py:_get_recipe_file -> __init__.py:get_recipe_file
to be able to call them from other modules.
(From OE-Core rev: f0e61a0d5597017c5f5d2dafb41118b79f505d9b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved _add_md5 function from standard.py to __init__.py to
be able to call it from other modules.
(From OE-Core rev: ee38bb20dc7ba21dac782d8d13383f81dfedef55)
(From OE-Core rev: b07da7d38bcefe8efdd6b22bb9251bef599ef040)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier to extend, as a layer can add its own sub-commands.
Argument parsing is also separated into two steps, the same way it's done in
recipetool, as we need access to the global command-line arguments early,
before plugins are loaded, both for debugging arguments and for the bitbake
path (we need to load the bitbake module to get tinfoil, which is now needed
to load the plugins).
Rather than constructing tinfoil once and passing it through into sub-commands
for their use, we have to construct it for configuration metadata, use it, and
then shut it down, as some sub-commands call out to recipetool, which needs
its own tinfoil instance, and therefore needs to acquire the bitbake lock. If
we're still holding the lock at that point, that's clearly a problem.
[YOCTO #7625]
(From OE-Core rev: f9bc3b27244a141ec7273445d3ea139a047e0ddf)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that scp can't be used to copy symlinks because it follows
them instead of copying them, and this is by design (since it emulates
rcp which also behaved this way); the unfortunate result is that
symlinks that point to valid files on the host translate into the host
file being copied to the target (yuck). The simplest alternative that
does not have this undesirable behaviour is to use tar and pipe it over
ssh.
At the same time, it would be even better if we properly reflect file
permissions and ownership on the target that have been established
within the pseudo environment. We can do this by executing the copy
process under pseudo, which turns out to be quite easy with access to
the pseudo environment set up by the build system.
Fixes [YOCTO #7868].
(From OE-Core rev: 69adaed0e982d627ebfa57b360b0ee049ea7a276)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use DevtoolError exception more widely for handling error cases. This
exception is now caught in the main script and raising it can be used to
exit with an error. This hopefully simplifies error handling. The
change also makes exit codes more consistent, always returning '1' when
an error occurs.
(From OE-Core rev: 2e4f1dcade7ccb581c7a390c32163ea3deeac6d5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the time when bb.note() gets called we want to see the output,
so ensure the level is set appropriately depending on the command line
options instead of being fixed at warning. (We don't want to see the
notes for fetch/unpack/patch though as they are too verbose).
(From OE-Core rev: 69f426a2d966a2228cbdc708b9ddab31005c6d96)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we execute an external command, we ought to prepare for the
possibility that it can fail and handle the failure appropriately. We
can especially expect this to happen when running bitbake in this
scenario. Ensure we return the appropriate exit code to the calling
process.
Fixes [YOCTO #7757].
(From OE-Core rev: 98a716d79bfc5434a5b42d3ca683eab3eea30a41)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ubuntu's default dash shell causes oe-init-build-env to behave a bit
differently - (a) it can't pick up the OE root directory and (b) it
can't see any build directory specified as a command-line argument
(since dash doesn't pass through any arguments specified to sourced
scripts). We could work around these but doing so requires some internal
knowledge of the script; a much simpler fix is just to force running the
command under bash since it's expected to be installed on every distro.
Thanks to Chen Qi <Qi.Chen@windriver.com> for this fix.
Fixes [YOCTO #7614].
(From OE-Core rev: 27942f546e6b08cdf9f2dbda2e24d237cde7f5f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provides an easy means to work on developing applications and system
components with the build system.
For example to "modify" the source for an existing recipe:
$ devtool modify -x pango /home/projects/pango
Parsing recipes..done.
NOTE: Fetching pango...
NOTE: Unpacking...
NOTE: Patching...
NOTE: Source tree extracted to /home/projects/pango
NOTE: Recipe pango now set up to build from /home/paul/projects/pango
The pango source is now extracted to /home/paul/projects/pango, managed
in git, with each patch as a commit, and a bbappend is created in the
workspace layer to use the source in /home/paul/projects/pango when
building.
Additionally, you can add a new piece of software:
$ devtool add pv /home/projects/pv
NOTE: Recipe /path/to/workspace/recipes/pv/pv.bb has been
automatically created; further editing may be required to make it
fully functional
The latter uses recipetool to create a skeleton recipe and again sets up
a bbappend to use the source in /home/projects/pv when building.
Having done a "devtool modify", can also write any changes to the
external git repository back as patches next to the recipe:
$ devtool update-recipe mdadm
Parsing recipes..done.
NOTE: Removing patch mdadm-3.2.2_fix_for_x32.patch
NOTE: Removing patch gcc-4.9.patch
NOTE: Updating recipe mdadm_3.3.1.bb
[YOCTO #6561]
[YOCTO #6653]
[YOCTO #6656]
(From OE-Core rev: 716d9b1f304a12bab61b15e3ce526977c055f074)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Jiajie Hu
Richard Purdie
Ed Bartosh
Markus Lehtonen
Christopher Larson