In some cases, it's unfit to use "+=" in a conditional appending, we would
end up with the variable being set rather than being appended, which is not
it mean to.
(From OE-Core rev: 9e9b5cbc352e1f8dce46458926b38a5aefc18fc3)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update configure-targets.patch:
- drop linux-aarch64 configuration
Update do_configure():
- add linux-aarch64* case to cover linux-aarch64 and linux-aarch64_be
- use linux-generic64 target in above case
Backport initial-aarch64-bits.patch:
- first order optimizations for Aarch64
(From OE-Core rev: 3252110ee5c8272a1f09563f2a794cac545e29d5)
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- This solves a conflict between mesa-gl and a custom library,
both providing a libgles2 package, although being disabled
in mesa-gl.
(From OE-Core rev: c9148c89532f0989771e4846259f1f10a924bc68)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in clutter the default paths solves the problem if we
put all patches in ${BP} directory instead.
(From OE-Core rev: cc41cb61707da1b4ae029de70c922802067166c2)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a -v/--report-ver option to report changes in PKGE/PKGV/PKGR even
if the value is the same as the default from PE/PV/PR.
Also add a -a/--report-all option to report all changes instead of just
the default significant ones.
Addresses [YOCTO #5263].
(From OE-Core rev: b7de1eaac9eed559b2d68058f5de67de74a6cb58)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mDNS name resolution is a key part of mDNS, so if the DISTRO_FEATURE is enabled
then install libnss-mdns.
(From OE-Core rev: ef2ee68778be8e5336cd33ab6551bce1d56047b6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: QA Issue: No GNU_HASH in the elf binary: 'armv7a-vfp-neon-mel-linux-gnueabi/nspr/4.10-r0/packages-split/nspr-dev/usr/lib/nspr/tests/formattm'
WARNING: QA Issue: No GNU_HASH in the elf binary: 'armv7a-vfp-neon-mel-linux-gnueabi/nspr/4.10-r0/packages-split/nspr-dev/usr/lib/nspr/tests/threads'
WARNING: QA Issue: No GNU_HASH in the elf binary: 'armv7a-vfp-neon-mel-linux-gnueabi/nspr/4.10-r0/packages-split/nspr-dev/usr/lib/nspr/tests/semaerr'
There are many QA Warnings thrown like the above for this recipe. This is observed for target imx6 sabrelite.
(From OE-Core rev: 98d9af299c6e110c7560f282f37f1f85c155213d)
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous return value for '-h' and '-v' options was 1 which was
not correct. These two options should return 0 instead.
(From OE-Core rev: 88701b8c8b73202a738447ea8a1c169a0efdc7ed)
Signed-off-by: Lu Chong <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refreshed remove-gets.patch to apply correctly and changed license
checksum since some years were added to the license file.
(From OE-Core rev: b7505d7c279888bd1675c1a8387edcf87cae8aac)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license line moved to another line.
(From OE-Core rev: 8712d24a6f3d687786eca770b7072bbc38ff88aa)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGECONFIG flags were iterated over using dict.items(), but this
returns the items in an undefined order. As this order determines the
EXTRA_OECONF append order, we can get EXTRA_OECONF which are functionally
equivalent, but whose contents differ, resulting in not using shared state
archives we should be using.
(From OE-Core rev: 843a5dd8f8f0461e286d9fdb3ba55205b4275f88)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
midori depends on webkit-gtk which could not build for mips64.
[YOCTO #5141]
(From OE-Core rev: abadeb934d4f41288c4fde6a4e5df2b124326326)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test that filter backup module files (files starting with ~)
was accidentally reversed in e6039e6e3b98d6ab91252a5012d76279b1fac6e8,
this patch restore initial behavior.
(From OE-Core rev: b2eb846ee12989add7a7ca8bbf45f293a3a7e56d)
Signed-off-by: Michaël Burtin <michael.burtin@innotis.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREVs to update minnowboard support via the following changes:
3F6C824 pch_gbe: Add MinnowBoard support
9f52743 pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32
ec7b5e6 pch_gbe: use managed functions pcim_* and devm_*
fd8bf50 pch_gbe: convert pr_* to netdev_*
9b278e9 serial: pch_uart: fix compilation warning
8982d79 serial: pch_uart: Fix signed-ness and casting of uartclk related fields
cdbf456 serial: pch_uart: Remove __initdata annotation from dmi_table
9e7c25e pch_uart: Use DMI interface for board detection
(From OE-Core rev: 6c7115a56c3d0bf3d6d0275bd2d49d8cfef5c028)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sshd status command results in error prompt:
root@qemu0:~# /etc/init.d/sshd status
/usr/sbin/sshd (pid 1199) is running...
/etc/init.d/sshd: line 100: return: can only `return' from a
function or sourced script
"service --status-all" command also display wrong status for sshd.
This commit fix this error prompt and make service command display
right status for sshd.
(From OE-Core rev: e7cf83ec3f39a7c41e38c6030b0d903fa7d37b2a)
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Builds a simple Hello World module on target.
Added to the defaults for core-image-sato-sdk.
(From OE-Core rev: c61c3dee162aa1f5bf31b2a09d8b916dc1712056)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since libpam is only built when DISTRO_FEATURES pam is enabled we should
not be trying to build libuser also.
(From OE-Core rev: 5b3c2aac48dd060f20a3c65f15560996c35695fd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* While working with a new capacitive touchscreen it was found
that the existing udev rule that creates the
/dev/input/touchscreen0 symlink was too restrictive and did not
match the MODALAIS entry for this touchscreen. which is:
MODALIAS=input:b0018v0000p0000e0000-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
* By looking at the input_print_modalias function in the Linux
kernel drivers/input/input.c file and referencing the meaning
of the evbits and attributes of the input_dev structure it seems
that for identification of a touchscreen the match with ,18
which was matching part of the absbit structure is overkill.
* It seems that the absbit entry is used for devices like
touchscreens and if that the the "a" is followed by 0 and 1 this
is sufficient.
* So the logic has now been changed to check for the "e" 0 and 3
values which correspond to EV_SYN and EV_ABS, then check for
the "a" attribute with 0 and 1.
* More information and history for this can be found at:
http://patchwork.openembedded.org/patch/25093/http://thread.gmane.org/gmane.comp.handhelds.openembedded.core
* This patch mirrors a patch done by:
Andrea Adami <andrea.adami@gmail.com>
(From OE-Core rev: d95a9b516861594bc89c7ee8079bab2904703ad2)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable docs creation for now it uses po4a and sgmltools-lite which are
not currently part of OE-Core
(From OE-Core rev: 5cab5935d6924e0aca5da4b682bb83e54f20bc1d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed patch that is now included upstream, add DEPENDS on check since it
is now used to create. Additional added PACKAGECONFIG for PAM and --disbale-vlock
License checksum updated to reflect additional Copyright owners names.
(From OE-Core rev: 48621dc693b5f63419e042ab5dd21ea12ce05f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this init script fails when the default shell is busybox sh. This
is because busybox sh doesn't set the UID. No other init scripts
in oecore feel the need to check the UID so just remove the check.
(From OE-Core rev: dd6a45536043af34c05a699e468cef4845f7affd)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
prevents 64-bit userland from seeing this definition, instead defaulting
to u64 == long in userspace.
Perf want LL64, flag __SANE_USERSPACE_TYPES__ to get int-ll64.h.
Fix the below issue:
| tests/attr.c:71:4: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 6 has type '__u64' [-Werror=format=]
| tests/attr.c:80:7: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 4 has type '__u64' [-Werror=format=]
| attr->type, attr->config, fd) < 0) {
| ^
(From OE-Core rev: e0b56f7ed84da4f71f448548e15d5a75e8eada6e)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootlogd was configured to write to a log file on the root file system,
the checkroot.sh was not able to change the rootfs to read-only because
bootlogd was started earlier and had a file descriptor open. Lowering
the order of checkroot.sh ensures that the volatile filesystem is set
up before anything writes to it.
(From OE-Core rev: 13c9bc143f6861517970dafdc7e7a45740d0933d)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is originally from oe-classic, it seemed to
have been dropped in the transition for some reason.
However I needed this patch to boot a system with 256 byte
inodes.
(From OE-Core rev: f36fd55e8721559dee2e9b57930cd3962958ba9e)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In normal use this is pulled in through libpng, but it's exposed in the headers
of cairo-pdf and cairo-ps and a build from sstate can end up without zlib being
present.
(From OE-Core rev: 8413bf1ce95802bff032b4592ca1aa4728d62cbf)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also nail down a previously floating dependancy on zlib, which is required for ptest
(From OE-Core rev: e76181535fce8bd4bb63f55106de4d074cae4e06)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove patch that was backported and from verion we updated to
Also cleanup white space
(From OE-Core rev: 849fbd50a52f1aa0330b47993d38a0f7812977c7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"update-rc: Stop and remove service if updating package" (oe-core d91b08) had a
bug in it's implementation of a "host or target" test which always resulted in
"target", so the rootfs scripts were attempting to restart daemons on the host.
(From OE-Core rev: 2b179d90eacc58f0b217f64407782a9174362850)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both nativesdk and multilib use MLPREFIX for their partciular purposes. When
we have both set, cross-canadian can confuse SHLIBSDIR. This forces the
variable to the correct value for cross-canadian, fixing toolchains in
multilib builds.
[YOCTO #5333]
(From OE-Core rev: 0633b93086a7de7226f4dc6ca403ee116bc58669)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are missing brackets in the check meaning MLPREFIX doesn't
get set for nativesdk-qemu-helper when it should be.
(From OE-Core rev: 5011f4bc8a418d0616d2936b60ecb7ca156632a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow packages that update kernel modules to run correctly
(From OE-Core rev: 72c23255cc88b5e2cd6f783231e6f42bf5190df7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered bitbake rebuilding packages because WARN_QA had changed. These
variables don't influence the output, so add them to the whitelist.
(From OE-Core rev: 96204ae6e1b19783d6a3f8c590890714eaa9e2d9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use PACKAGECONFIG to add options for ca-certificates, gnutls, and libproxy.
Enable ca-certificates by default as all it needs to know is the right path,
ca-certificates not being installed isn't fatal.
(From OE-Core rev: 1f03b6aa9e475f341815788613513ff63add8a5f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use trim_version to get version part of the executable name.
(From OE-Core rev: af0f93059510fb4ccbe7b1497bda8dd8370245a5)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License Checksum changed due to date updates in files and lines moving.
(From OE-Core rev: f2065a3388cdbb4586bf5a808455a011b557de11)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the README to LIC_FILES_CHKSUM and update LICESE since it now
mentions that some files are licensed under BSD
(From OE-Core rev: b1b02835b30e44cd923c57ac5a77de8fc1e0e474)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The updated README now mentions that some files are derived from BSD,
so update the LICENSE to be PD & BSD.
(From OE-Core rev: 063f67f5ecbe6edc226e1a25b5b8387881592c34)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the ptest patches and instead use --enable-installed-tests, updating
run-ptest to invoke gnome-desktop-testing-runner.
Drop the x32 build patch, upstream has integrated a similar fix.
(From OE-Core rev: 33bb8d5da050519043bb913bae4f5692bbd899ad)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnome-desktop-testing is a test runner for GNOME-style Installed Tests, and will
be used by run-ptest to execute these unit test suites.
(From OE-Core rev: 4657b9a35e276b0891729d43f33db49ee5e3ae7d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop Remove-mibstore.h.patch as that was a backport from git and is integrated
into 2.3.3.
(From OE-Core rev: cce5f8ea5ecf87c506be1c5e21d5058fbe953143)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License checksum changed as a typo was fixed upstream.
(From OE-Core rev: e7c3969b37f5ddbd83c1956f72a4cfb4d1060b66)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License checksum changed as some missing copyright notices and dates were added.
(From OE-Core rev: 2516c3a84c7ab146937ff85dbe03df841aec3906)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This release contains a few important bugfixes in addition
to a few new features.
(From OE-Core rev: e69442ebca53fe36988fcf76a9c3a4cc5e3d9499)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to latest version 3.8.0.1
(From OE-Core rev: b08de5ea62e34ac697a2911cf47b0eed42f1d7c0)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to split live into iso and hddimg without
adding a new image type class.
This patch has only a visible effect on HOB and solves
part 2 of #3197
[YOCTO #3197]
(From OE-Core rev: f05ae5f57d9d1bd839fae0e3f353d4e0e303a183)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building against the sysroot, out of tree modules can require modpost
and other utilities normally found in the kernel's scripts directory. For
the kernel source in the staging dir, these scripts have been removed to
avoid mixing archiectures when packaging kernel-dev (among other things).
Rather than further complicate the kernel's install rule, or its packaging,
we can restore the scripts by building them in the kernel staging directory
after the sstate is installed, making them available to packages that need them.
(From OE-Core rev: 5bcd65807aa634060f98928db6011856934dabe4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--disable-install-makestrs was removed in 1.0.8, released back in 2010.
(From OE-Core rev: b972a047ede781b9e0570c55e803245e405e529b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--without-x was removed in 1.32.0, so the correct option is now --without-xft.
Also remove --disable-glibtest, as configure.ac doesn't invoke that test.
(From OE-Core rev: e806f4ff404515f38318b6fed7d2b614c2138da6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These options appear to have never existed in libmatchbox, remove them.
(From OE-Core rev: e8853d58db75a1e1453f2d517fb533f086c2dab2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--without-libjasper and --without-libtiff were removed when GTK+ and gdk-pixbuf
separated, in 2.22.0
(From OE-Core rev: d7aa6bf8d7702736e2bd81442ddef98869f40eae)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since when updating packages packages managers do not remove the previous package,
it just replaces new files and run pre/post install scripts. This causes not
to update update-rc scripts if they were changed.
This patch is useful in case the newer package version updated the update-rc
script.
(From OE-Core rev: d91b08f3a27baa49ae35dc20dba1b2d76e6abd64)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--enable-threads and --enable-fake are obsolete, unrecognized options
for connman now.
(From OE-Core rev: f93ac05acafb9ebf4fa4f35e4f1b7780d3d8a5e9)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xorg libraries that use Xmalloc need to know if malloc(0) returns NULL or not,
and as this is a runtime test it can't be checked for. Previously
xorg-lib-common declared that malloc(0) did return NULL, but this isn't true for
eglibc (only uclibc).
Instead, use libc-specific overrides to pass the relevant option.
(ideally the check would use the autoconf cache so this can be stored in the site files)
(From OE-Core rev: e628c8aba0189de30de2833882b9999ff3b6547a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add libswscale to PACKAGES_DYNAMIC because it was missing. Adding it also allows libswscale to get included in an image using IMAGE_INSTALL.
(From OE-Core rev: b57e7fa8b35cfcf9af6ca72d51bdf67e49254ac2)
Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
(From OE-Core rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't use htobe* and be*toh functions because they are not
available on older versions of glibc, For example, shipped on Centos 5.5.
Change to directly calling bswap_* as defined in byteswap.h.
(From OE-Core rev: 63edb6b9a8bdf2f5541edd618f2f598185e37223)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* we correctly have
${STAGING_DIR_NATIVE}${base_sbindir_native}
and then double slash in
${STAGING_DIR_NATIVE}/${base_bindir_native}
* similar in PKG_CONFIG_DIR where libdir also starts with slash
${STAGING_DIR_HOST}/${libdir}/pkgconfig
* also fix double slash in insane.bbclass and staging.bbclass
* I was a bit nervous about staging change (in case the / was important
in some weird use-case, but the extra slash is there since following
commit where other extra slashes were removed only the one before
libdir was kept:
commit 6ea78d6489
Author: Richard Purdie <rpurdie@linux.intel.com>
Date: Mon Nov 2 17:10:51 2009 +0000
autotools.bbclass: Separate out useful staging functions into
base.bbclass and call from autotools classes
* this isn't fixing any real-world issue AFAIK, I was just trying to
debug one weird case where debugedit fails with
canonicalization unexpectedly shrank by one character
and it's easier to grep for '//' without many harmless instances
already in run* scripts etc
(From OE-Core rev: 0ddaf52e9e344986ae2b016cc068d9eee71b4347)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.
commit c5ef0294a9b8d178896a47c9f5d6e3dd6797e343
device_table-minimal.txt: use user/group names instead of uid/gid
This patch changes it back.
(From OE-Core rev: 5c5db302400894c2bb1f4052d0f120738589c128)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is uncommon, but it is possible for upstream sources to contain files
that have wildcard characters in their names (Webmin is an example).
Because we were running glob.glob() on every entry in the list of
entries in FILES and then adding the result to the files list to be
processed, the process would loop infinitely if files whose names
contained wildcard characters were present. Fix this by avoiding
re-processing the output of glob.glob() with itself, and also "escape"
wildcard characters in FILES entries added automatically from
do_split_packages().
Fixes [YOCTO #1676].
(From OE-Core rev: 1aa3fbb547b0e21455f0dcc9b72ded08dc0efd67)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user runs devshell in kernel recipe and compiles kernel,
this will fail by unrecognized option of LD.
----
$ make
...
arm-poky-linux-gnueabi-ld: unrecognized option '-Wl,-O1'
arm-poky-linux-gnueabi-ld: use the --help option for usage information
----
This set to empty LDFLAGS when user runs the devshell, and solve this problem.
(From OE-Core rev: e36ac3ab3a7fe02c7eeb3998ff33c001ab795841)
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When passing the wrong value for UBOOT_CONFIG it ought to raise an
error otherwise it is quite difficult for user to notice it didn't
behave as expected.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: 5110dc988e3b8a1ce8b2309e4ddf17abb3f1cb0c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to incorporate the two following
configuration changes:
452f067 lxc: Add lxc kernel config
a249eba x86_32: Enable X86_32 and disable 64BIT explicitly
(From OE-Core rev: 64d4c508652bc5d8a0b4c01f0d0813e58d6b39a6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
The oe-core live class now fully support compressed ISO images this is
the corresponding kernel change.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
]
(From OE-Core rev: af2ef5085e92ca6291dabb134a7a3fb194a21d7a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV with the following commit:
[
meta-haswell-wc: update bsp scc to use linux-yocto-3.8 standard/common-pc-64/base branch
Remove "branch haswell-wc" from haswell-wc-standard.scc
so that "haswell-wc" BSP uses standard/common-pc-64/base branch
on linux-yocto-3.8 repo.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
]
(From OE-Core rev: 978c77cae12f69e05ad97c6edd03d292098fff88)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the overrides are being applied backwards. This means something which is
platform specific is overriding something which is machine specific which
is clearly not intended.
This patch corrects the ordering to match the normal expected behaviour of
OVERRIDES.
Secondly, all overrides are being searched for each path in turn. What should
really happen is that we should look for the highest priority override (e.g. distro
or machine) in each layer, then move on to platform/tune (e.g. armv7a) and
then to arch (e.g. arm). This patch therefore also reverses the for loops
to achieve this behaviour and give the result the user would expect.
(From OE-Core rev: 92cbf7eeea553bfa24c7081473fa8bc4ebc1f552)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before checking if the image is a valid value, we need to check if the
list of items is big enough or we will raise an exception.
Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: b833837cac377e7c1c3ff18531b152340b669329)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 69c26e795c117aabfaf313abbfd10e70ede633d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
(From OE-Core rev: 3d5a6d0a480a0fa98260a3b3ffc71b8d9e3e58af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a fix missing from a previous commit:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=20a86e16bc54b74fbdb2a3a407d54210ea262925
since there was another section of toolchain-scripts needing updating.
This patch fixes the missing reference and unbreaks the ADT toolchain.
[YOCTO #5340]
(From OE-Core rev: e1b8b4859f00b40fb941a07a394ed35e06541663)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when x11 is not defined in DISTRO_FEATURES, there are no x11 headers
so True is not defined leading to :
| ui/sdl.c:62:8: warning: type defaults to 'int' in declaration of 'doing_grabs' [-Wimplicit-int]
| static doing_grabs = True;
| ^
| ui/sdl.c:62:22: error: 'True' undeclared here (not in a function)
| static doing_grabs = True;
| ^
(From OE-Core rev: d3d5ccd3275196fb9e4cb8f49d3c087b97c20ed6)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected and configure doesn't allow to explicitly disable it
(From OE-Core rev: 983446c4f4274b9fd482b2d6b711428f4483c02f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dbus-glib was missing in DEPENDS in order to enable dbus backend
but because dbus was in DEPENDS lets enable this PACKAGECONFIG by
default
(From OE-Core rev: c832c457ff40f0f65ab28c17b78b88cb79823db1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.
For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.
(From OE-Core rev: 72938a8631cfe5be5ac88ad67f2db595e2487e86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
(From OE-Core rev: b5bafccb89f45d7cdd515b4ba45e0152ca7922de)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5313]
When performing an attemptonly install, we should skip an errors and
continue to install everything else. However, there is a case where two
packages can conflict, and cause a hard failure.
This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.
To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.
(From OE-Core rev: 4228005689e31ebcafcf0969e80fcc021d1ae063)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of QEMU machines, a global public DNS is provisioned,
as the network is not configured via DHCP.
Google's public global DNS server 8.8.8.8 is used.
Partial fix for [YOCTO #4587] (qemu machines case).
(From OE-Core rev: 05ebf5bbacc58315f1b33ffb80148d568f88855d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: 4003218f774c38bb5de0d95a43153f8b8d7fc4ce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: c5d7100a358244085a697a23790676df5eb4afa3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
(From OE-Core rev: fe039170236080291c0220476a5809774f82ee5c)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make kmod-ptest able to compile with separated source and
build dir. Since kmod test files contain kernel modules for
many different architectures, strip and arch gets confused
and throws errors.
(From OE-Core rev: 61cb45869caaed6578a217effaa72d247395d078)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following QA error:
ERROR: QA Issue: nativesdk-dbus: Files/directories were installed but not shipped
/run
/run/dbus
(From OE-Core rev: 796b7510853e71f158ad18dcea4cd1a10c7ef294)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a number (in fact most) BSPs that require INPUT_EVDEV for basic
functionality. The size increase is minimal, so we'll add it to the
standard configuration for all platforms.
(From OE-Core rev: 965affabbf36fa5b5e466d331479c2295269242e)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bb.utils.copyfile is for a specific purpose and more complicated than needed
here, so just use shutil.copyfile.
(From OE-Core rev: dc81df215cc94c279991df35125d94770a1bc3d2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages may return error while running opkg-cl configure, during
first boot. This will fail 'ExecStart' and 'ExecStartPost' will not run.
Without 'ExecStartPost' opkg-configure service will continue to run on
successive boot attempts. 'ExecStartPost' should disable this service
after first boot irrespective of 'ExecStart' status.
(From OE-Core rev: cd6041071ddf76693cda7632379ceddd1d21a7fb)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cross-canadian compilers are now build once per architecture but were being
installed into tune specific locations which is incorrect. This adjusts things
so they are make TARGET_ARCH specific. We gain the tune specific parts from the
target sysroot which remains tune specific, the compiler and tools are independent
ot that.
binutils/gcc require sysroot options but since we reset at runtime, these shouldn't
have dependencies in the sstate checksums. They are therefore also excluded.
With these patches, switching machines does not result in a rebuild of *-cross-canadian
and the compiler is correctly located and referenced in the target images.
(From OE-Core rev: f58acab6414fe96d9e07ebbe86b348d2ac2bed5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE=X bitbake nativesdk-pixman; MACHINE=Y bitbake nativesdk-pixman
where X is an armv7a machine and Y is not results in pixman rebuilding
due to the neon option. This is incorrect. The ultimate fix will be
not to apply target system overrides in the nativesdk case. Until
we do that we can at least work around the issue as done by this patch.
(From OE-Core rev: 2881747ec270bffc039d10198399e2686407b521)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only care about the end result in this case, not the specific inputs
that went into determining the gcc option. This change updates the code
to reflect that.
(From OE-Core rev: 83055511dab1e2aeefe84262ebe52595848c844b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you build nativesdk for machine A, then change to B you will see sstate
manifest warnings for the packagedata files. The stamps are machine
specific and should not be, ditto for native.
This patch copies the populate-sysroot extra stamp entries to avoid
these warnings.
(From OE-Core rev: a64de25d6006ec6dd777d8f3820a48244dfbf62b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of looping until the generated signature is non-zero, just
return 'ffffffff' if it's zero. This avoids an infinite loop if the
generated signature is always zero.
(From OE-Core rev: 34c74ba45c04efc2dd998545bf7a31d7b06a0ee0)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a added additional
initramfs functionality and created an additional task on kernel.bbclass
Adding this task was missed on the linux-dummy recipe, which causes task
dependency issues due to image.bbclass depending on
"virtual/kernel:do_bundle_initramfs". This change adds a dummy task
which resolves the dependency issue.
(From OE-Core rev: c0a8c5c07e0dd6f0ae302e9a4dcf7973e73e68e1)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that makedevs will not cause image creation failures
when it encounters a pipe (fifo) that exists from a previous image.
This handles mode changes and it will correctly fail for dangling
symlinks.
[YOCTO #5288]
(From OE-Core rev: 3a4b0e7973bef43f16058137e64600e2f890b117)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg uses xz as a compressor and the binary image is needed on the system for
dpkg to work correctly.
[YOCTO #1881]
(From OE-Core rev: 8f6bc04c9b563f8659ce0e053072deca02da38a5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a potential issue with the fastop code in pseudo since a process may
exit and allow some other function to run before the server has processed
the commands run by the process. Issues have been see with unpredictable
file permissions.
To avoid this, we ping the server before exitting which guarantees it has
processed the current command queue.
The patch was written by peter.seebach@windriver.com
[YOCTO #5132]
(From OE-Core rev: a8a1f12c51ffdca011db194894fd7d14c119fb09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bug in handling of the mxcsr register since cpu flags
were not getting updated after fxrstor operations. This small tweak
fixes that.
[YOCTO #5248]
(From OE-Core rev: 5dc43cdc08e6698afa16ba79f3506a1555bb3710)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Buffer used for copying a "%c" character was getting
out of scope when it was required by the sprintf operation.
[YOCTO #5272]
(From OE-Core rev: c7de71813c8f47438f44749136877442cf73d536)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
exit 0 was done if $D != NULL, if one or more
shlibsign executions fails.
(From OE-Core rev: 5dc3eb72c4b9b68ab13310383a90fe7779bf92a7)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A zero MBR disk signature is generally seen as no signature and
another partitioning program might install a new signature.
(From OE-Core rev: b6cafb1fcd6c168f8f4a4d2d5c74f3b425f156f3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Activating the INITRAMFS_TASK can cause circular dependencies, but
that is up to the end user to resolve in recipes. The INITRAMFS_TASK
should also trigger immediate linking of the cpio task in the first
compile pass. This was a subtle regression introduced by: 609d5a9ab
(kernel.bbclass, image.bbclass: Implement kernel INITRAMFS dependency
and bundling).
This patch restores the previous behavior and only affects the
INITRAMFS_TASK which is not set by any of the default build profiles
in oe-core.
Reviewed-by: Andrea Adami <andrea.adami@gmail.com>
(From OE-Core rev: 36faac868e086e9c23537b107cdd973d7fd980bd)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently opkg uses a script to configure packages during first time boot.
This script is present in rcS.d and when 'sysvinit' is disabled this
script doesn't execute. For systemd only distros this newly added service
will run the opkg configure during first boot only.
(From OE-Core rev: fdcfcea5b8eae1769a217f8efea9c02f037f63fa)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libfm uses "preferences-desktop", so link it to the close-enough
"preferences-sytem".
x11vnc uses "computer", link it to "terminal".
pcmanfm uses "system-file-manager", link it to "file-manager".
[ YOCTO #4062 ]
(From OE-Core rev: d856488179d14d05f1121c171abf4eac82e81fb9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sato doesn't use the pcmanfm desktop, so hide the desktop preferences launcher.
(From OE-Core rev: 778ef56c4b5c0d450a9b2e1df2b3e963dcfebed9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During parsing this recipe builds up a list of splash image files,
however it was recording full paths to local files (i.e. the files next
to the recipe) and then in do_compile it was pointing to those instead
of the fetched files in WORKDIR. Fix it to use the fetched files which
has the added benefit of the do_compile signature not changing if the
recipe is moved around.
Fixes [YOCTO #5250].
(From OE-Core rev: f1850f9835651baee8d3a0858d00a5d22efcab19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We wipe out and regenerate all configure files so there is no point in
patching them.
(From OE-Core rev: 8d7036cdb71e66e619053c2545cfc1fbddf1895b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
native recipes were not using the site files. There are some things we need
to correct such as not using the path to sed-native. This allows us
to deploy settings globally for all recipes rather than hacking around
then in individual recipes as libtool-native used to for sed.
This fixes a regression introduced by
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=32edeb391f2107bb66b361cdcd4b8d4447731c33
(From OE-Core rev: db2eb3258844458569b7d4e6ed82c345858a3b99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems strange that runlevel always returns 1, The comment says it is
related to sysvinit, but if we enable systemd, sysvinit will not be
installed. and we have created a link for runlevel to systemctl if
systemd is installed.
(From OE-Core rev: adc11d60fd4b555198d6653cd71eb1372e0b03a0)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is correct behaviours to output help and version information,
and should return 0;
When input parameter is invalid, print help information and exit.
(From OE-Core rev: 7c61daa08fa51557e0e6785e738646cb5d8de91b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an example device_table in the SDK under /usr/share/
(From OE-Core rev: be697e3cfa67fa61aa9ef2c9c0c75f4ed452414e)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value of SFTPSERVER_PATH is "/usr/libexec/sftp-server" defined in
dropbear-2013.58/option.h, but after commit 406bd38b423[bitbake.conf: change
libexecdir to ${libdir}/${BPN}], sftp-server is provided by openssh package,
and is installed into ${libdir}/openssh, so we pass it explicitly.
(From OE-Core rev: 5f6deb044226885912214532cebb1d871f03c53a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xz is required on the target filesystem since it's needed
to unpack some of the bootstrap packages.
(From OE-Core rev: 3f302e6686e9c35d3fd771b8aed214bf739e59f6)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglinfo.inc has some board-specific EGLINFO_DEVICE settings but is missing the
dependencies. Maintaining them for all supported devices in oe-core isn't
scalable and this is trivially supported though a bbappend in each BSP layer.
This was also causing problems compiling eglinfo on meta-yocto-bsp's beagleboard
machine as the EGLINFO_DEVICE setting for beagleboard was telling it to use the
closed GPU drivers, which are not supported in meta-yocto-bsp.
[ YOCTO #5224 ]
(From OE-Core rev: 2c1e147e61875054039ff08c36657c68c73037ee)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The battery applet emits a warning if the hardware doesn't have a battery (it
shouldn't) and the parser emits a warning if two separators are used in a row
(which happens if the hardware has a keyboard). Silence these with a patch from
upstream.
[ YOCTO #4061 ]
(From OE-Core rev: 4e2b86787ed7a44ad88aa1431207d049c2cb444a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The various populate methods need to accept a path as an argument vs
using hard expanded variables. In the case of the boot-directdisk
class it uses a different path for HDDDIR but it gets eclipsed by the
the class definition at the point in time ${HDDDIR} gets expanded.
The logical fix is to pass the arguments to the functions as opposed
to using globally expanded variables from the class definitions.
This patch changes 3 things:
1) syslinux_hddimg_populate takes an argument for the destination
2) syslinux_iso_populate takes an argument for the destination
3) populate is changed to boot_direct_populate because there
was a conflict with it overriding the populate in bootimg.bbclass
[YOCTO #3994]
(From OE-Core rev: 63d164b755b984021f7e3cdba7280918ded6e821)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A newer version of syslinux is required for an EFI enabled isohybrid.
This is used for the the capability to generate 3 types of ISO images,
all of which can be booted off a USB device or HDD if copied with dd.
1) PC BIOS only ISO
2) EFI only ISO
3) EFI + PC BIOS ISO
The syslinux.bbclass required a minor tweak because a few .c32
libraries require dynamic loading from the created media as of
syslinux 5 and up. This was a good time to also fix the
duplication of the AUTO_SYSLINUXMENU block.
[YOCTO #4100]
(From OE-Core rev: 17d74fbd09e377e100423e1a73b9d4ce761a21d7)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkzftree is needed to allow ISO images to be compressed with
minimal runtime overhead. Below is an example of the savings on a
core-image-minimal.
Before ls -l:
24117248 core-image-minimal-qemux86-64.iso
Using the mkzftree ls -l:
16777216 core-image-minimal-qemux86-64.iso
(From OE-Core rev: 808d4371939ec48ed62e0c0b6614b96d61b1f7b8)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SYSLINUX_SERIAL variable was hard coded and occasionally needs to
be different for the kernel argument vs the syslinux argument.
In the auto-generated boot mode console=tty0 was hard coded, and this
is not needed at all, and causes problems in some cases if a end user
wanted to change the console=... via the kernel boot argument APPEND
mechanism. The default can be forced with SYSLINUX_DEFAULT_CONSOLE
for systems that need a special specification to enable the frame
buffer instead of a serial port.
[YOCTO #3944]
(From OE-Core rev: cf2fba810a8a59cff71bf2c12e516e9080146604)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syslinux.bbclass already has support for automatically generated
serial and graphics menu choices. This patch adds the same concept to
the grub-efi menu. That makes it possible to generate a single image
which can boot on a PCBIOS or EFI firmware with consistent looking
boot options.
[YOCTO #4100]
(From OE-Core rev: 8444199fb598012f54853b010b5e5cce750db89d)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the latest mkisofs it is possible to generate 3 different types
of ISO images, which can be used in various scenarios.
1) PCBIOS Only ISO
- This option remains unchanged by this commit
- Uses syslinux menus
- Can be directly copied with dd to a USB device
- Can be burned to optical media
2) EFI Only ISO
- Uses grub 2 menus
- Can be burned to optical media
- If you want to use this image on a USB device
extra steps must be taken in order to format the USB
device with fat32, and copy an EFI loader which will
in turn load the iso image
3) PCBIOS / EFI ISO
- This is a hybrid image ISO that will work for case 1 or 2
as above with the same restrictions and boot menu types
depending on what type of firmware is installed on
the hardware or depending on if EFI or "Legacy Boot" is
enabled on some UEFI firmwares.
The syslinux.bbclass is now always required because that is where the
isohybrid dependencies come from as well as the configuration data for
the isohybrid. The isohybrid is the secret sauce which allows the ISO
to work as optical media or as a disk image on USB or a HDD/SSD.
[YOCTO #4100]
(From OE-Core rev: a4baf911ab9d306ce5200e7d794ed6a9ccb25f30)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso9660 file system support needs to be added to grub in order to
be able to correctly find the grub.cfg. The grub commands to locate
the grub.cfg also needs to be encoded into grub's default
configuration.
This change allows the resulting grub binary to work both in the hard
drive / USB boot case or the optical media boot case.
[YOCTO #4100]
(From OE-Core rev: 0bc0762a479b5182a07fccb2b1e9cd5fc15ca485)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BB_ORIGENV variable isn't picklable and causes failures when generating the task
signature for the autorun image mode. We don't want to depend on its contents anyway
so lets exclude it.
(From OE-Core rev: 3f5f9d2681d41e44dade5d3a5a4bff3fd38f5506)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log files will open in leafpad under Build Appliance.
Part of [YOCTO #4727] fix.
(From OE-Core rev: 1645a3c1d288a4de38683129ed146198d8093a47)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A text editor is needed to examine log files.
Part of [YOCTO #4727] fix.
(From OE-Core rev: e598642988d1be1812b8df8ecd4f9d53f66068c9)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The function that "bitbake package-index" relies upon when using the RPM
package backend (package_update_index_rpm()) uses MULTILIB_PREFIX_LIST
to get the list of package architectures to be indexed, but that
variable is only set when populate_sdk_rpm or rootfs_rpm are inherited,
which is not the case for the package-index recipe. Until we're able to
refactor this properly, for minimal impact just use the value of
ALL_MULTILIB_PACKAGE_ARCHS if MULTILIB_PREFIX_LIST does not give us any
architectures (the equivalent function in the ipk backend uses the
former variable).
Having "bitbake package-index" working is important because it's the
only practical way of indexing RPM packages for use as a feed; host
versions of createrepo won't work properly because they won't support
indexing recommends relationships.
Stopgap fix for [YOCTO #5278].
(From OE-Core rev: 9359719c563e1ab0ff10186d1a1b6bde7840dbf3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Putting a warning at the top of do_compile is useful but not everyone reads the
file from beginning to end, so use a trap to put the message at the bottom too.
[ YOCTO #4919 ]
(From OE-Core rev: 51950fcbe4b98bdbb8b3dde88a8729e540d9609f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the future bbnote/bbwarn will be integrated into bitbake's logging, so use
those functions instead of echo directly.
(From OE-Core rev: 4933d7ae45d88090191c8ea07fd109ed34925e2d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This currently leads to a floating dependency on GTK+. Since most users
in an embedded context won't need this, just disable it by default.
Fixes [YOCTO #5116].
(From OE-Core rev: 6bef1e02dff6c6482791ab424d7e5dedeb840cf6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sed-native is built before these programs, hardcoded paths to sed-native
can end up in scripts and other parts of the system which may cause issues
if they are later used from sstate and sed-native is not installed.
To avoid this, this patch changes the global site configuration to
specify that plain "sed" is fine to be used. We need to spell this
out for gcc since it doesn't see the site files since we don't autoreconf
it. We can remove the values from libtool. We tell perl to use "/bin/sed"
since it requires a path and the system sed should be just fine for it.
[YOCTO #4971]
(From OE-Core rev: 2ec171cb188601bf18c6c2895870907024b1c52a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox 1.21.1 's mdev has changed the way the device's name is
reported so now we get input/event0 instead of event0.
I think this commit is responsible of this new behaviour :
http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e
Update mdev.conf according to this behaviour so that sound
and input devices are correctly populated (and now
/etc/mdev/find-touchscreen.sh is executed).
Tested on an arm board.
(From OE-Core rev: 61b2950ebbc01f5e4fd7aece05bf371100c0c390)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the 3.10 meta branch SRCREV to import the following config changes
for tghe sugarbay and common-pc wifi fragments.
dad2b7e common-pc-64: add kernel CONFIG options for sugarbay platform
37c617d common-pc-wifi.cfg: add support for broadcom wifi drivers
[YOCTO #5117]
[YOCTO #5238]
(From OE-Core rev: 180f465b0cab13e17dc92ac5c88d7d9001cd5b11)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
(From OE-Core rev: 0623a0e1bd7cf0c405a0469e9f16779971c0c3b5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
(From OE-Core rev: 5acfced041477d8c272485196e87ad601a0ce5b4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We switched to using os.mkdir with the file creation mode specified as the
second parameter. Python masks this with umask behind the scenes which isn't
what we want, we really want the permissions we specify.
To avoid this we zero the umask beforehand and restore afterwards. Other
solutions are possible but would not perform as well which is why
we're using os.mkdir in the first place.
Martin Jansa deserves the credit for debugging where the problem was.
(From OE-Core rev: f91226553e39439bfd17ab2b06c56cb8bf41061b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of considering that ping test passed after 1 reply,
wait for at least 5 consecutive replies in 60 seconds (which should
be enough time for connman to reconfigure the interface in systemd
images and help with the fake ssh/tests fails.)
(From OE-Core rev: 6fd19a9df0ad25b2822f12e2c3a97f1b71068d4e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add useradd, groupadd et.c. since all target packages
which inherits useradd will have a postinstall hook
dependecy against the yocto specific groupadd.
(From OE-Core rev: 829edcb6e59e2e20dd4165b727b685f286f38031)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a second in a series of patches to enable
offline rootfs creation from a package repository.
Some postinstall cmds are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball + a package repo.
End goal is to create a sandbox where users of a Yocto
based distribution can customize a rootfs from a package feed
with their package manager of choice.
With this patch, I can successfully create packagegroup-core-boot
with only the toolchain tarball(OPKG). More fixes for a few postinstall
hooks outside of packagegroup-core-boot will come next.
(From OE-Core rev: f90e1a45a042468e4e9a0fc91b57c6dba6f7adc9)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
distutils: Replacing path to native path only to be done to non-native python packages
distutils: Replacing path to native python by path to python in the
image to support python packages with console-script setup resulted in
a "bad interpreter" error message because coreutils-native is not
a specified dependency of a number of native python packages.
We modify the change to apply specifically to non-native packages.
(From OE-Core rev: 312b6b33dca565153bc2e92d7ff6dd2974db4edb)
Signed-off-by: Amy Fong <Amy.Fong@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The po.m4 file is deleted by the more recent autotools.bbclass
autotools_do_configure code which handles gettext. There is therefore
no point in patching the file anymore.
(From OE-Core rev: 986c660cdb34e23a9c72f219db9363a6b4e4b7ec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The po.m4 file is deleted by the more recent autotools.bbclass
autotools_do_configure code which handles gettext. There is therefore
no point in patching the file anymore.
(From OE-Core rev: c3265281c3ab0979ec2753eb7580c39b005d5fa9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not use pushd, busybox does not support it if system only has busybox;
Replace find command with ls to avoid some busybox's find unsupported options;
(From OE-Core rev: 1f059654bc81e55896c96c7c8e32e09f8925a761)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently do_install_ptest_base is failing because it cannot find
'test' directory in build dir, ${B}. 'test' directory is present in source
dir, ${S}. Same is true for build-aux/test-driver and test/sys.tar.xz.
Also this fixes:
QA Issue: systemd: Files/directories were installed but not shipped
/usr/lib/udev
/usr/lib/udev/rules.d
(From OE-Core rev: bec8a29fb27ccdada0839d0bdd67ae22179a94e8)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pushd is not available when system is using dash as default shell
(From OE-Core rev: ec7e738845f72888b0016340d7da636e5ec46a1b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
(From OE-Core rev: ae98a95577ba9c8a6a0d9a78d4cea33a92adff35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Documentation.conf is used in WebHob to display
information strings about the collected variables.
This patch brings the file up-to-date with latest
information available from the manual.
(From OE-Core rev: b9743c7b130bda3e50cdba4cf260232f1c24abcd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It causes shadow to be used in core-image-minimal and increase the
size by 1.5M. We will add the shutdown user to group via base-passwd
which we depend upon instead.
[YOCTO #5230]
(From OE-Core rev: e33e4c30a4fa5b98903d6a46cdcc5bca9cf50848)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since using useradd in sysvinit causes core-image-minimal to
gain shadow utilites instead of using busybox, we add the
shutdown group directly.
[YOCTO #5230]
(From OE-Core rev: 47ebf756efeb88727459165e00c16671854e19a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5233]
Modeled after Chen Qi's fix to [YOCTO #3924] from oe-core commit:
6b6db7b4fb7aa17b8e29076decc830149b9d35bc
init-install.sh: remove unnecessary udev rules file to avoid error messages
/etc/udev/scripts/mount.sh is removed by init-install-efi.sh, but the
udev rules file which specifies the invocation of this script is not
removed, thus causing the error message during a live install:
/etc/udev/scripts/mount.sh: No such file or directory
The /etc/udev/rules/automount.rules no longer works once the mount.sh
script is removed. Remove it to avoid the error message.
(From OE-Core rev: 1f5a2b616d902b1158e348bf8c33b6d36e21cadc)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5237]
The current grub.cfg manipulation depends on an existing root=
parameter. If this doesn't exist, the correct root= parameter will not
be added.
Instead, remove any existing root= parameters and add the correct one
explicitly.
(From OE-Core rev: 14b124122c1b7d10b9a3a96fe4617c6fc1c661c5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes in this commit, dc5f6c3898,
moved apt config directory from native SYSROOT to WORKDIR.
Unfortunately, Dir::Etc in apt.conf was not changed accordingly and
sources.list file could not be found during do_rootfs().
This commit fixes this issue.
[YOCTO #5241]
(From OE-Core rev: 65a2a1e1d0b0e3dcc34d47f46185f24d753b53dd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
That is a generated file and patching it might fail, the patch already patches configure.ac
which will have the configure file regenerated.
(From OE-Core rev: daa56093de3a518b79480c90ec5124a79189bf7b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we dont use prelude in OE, we just disable autodetection of
prelude in the libpam configuration.
Seems like an old bug:
http://lists.openembedded.org/pipermail/openembedded-devel/2012-March/083804.html
(From OE-Core rev: 9096c6a46cf2467c90873c235b4533faf97d6175)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a first in a series of patches to add items
to the nativesdk toolchain tarball.
Many of which are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball.
End goal is to create a sandbox where _users_ can customize a rootfs from a
package feed with their package manager of choice.
(From OE-Core rev: e70019bcdce83ae2a202338518f8725775abaa32)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libtool scripts were finding bash was /bin/sh and then using bashisms which
then got into sstate and used on machines where /bin/sh might be dash.
This changes things to search for bash first since its preferred. We then hardcode
bash into the scripts which is more correct.
This does mean we have a dependency on bash but many of our scripts have
that anyway.
(From OE-Core rev: 367a19aaf31bcf997f10d045e7954cc800189052)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU machines don't have virtual IrDA or PCMCIA hardware, so don't claim to
support them.
(From OE-Core rev: 694ca965eea971077e135cda4e54fa1cb0243233)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now, the comment in the boost.inc file suggested to enable
the boost-python library by uncommenting some lines in that file.
Using the new PACKAGECONFIG feature, boost-python can now be added
optionally without need to modify the file or copying those lines
into a bbappend file.
Furthermore, we obtain the python version by inheriting python-dir
instead of fixing the python version in this file.
This commit is motivated by the need in the meta-ros layer, as
discussed in the issue #145 of the meta-ros issue tracker [1].
[1] https://github.com/bmwcarit/meta-ros/pull/145
(From OE-Core rev: 7568bfdd114597956a1da68746f207ec7f93a48d)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to import the following change:
kgit-s2q: always update ORIG_HEAD after applying changes
In situations where git am fails to apply patches, and git apply is used,
we must update ORIG_HEAD as well as HEAD. This is required, since if the
next patch in the queue also fails git am application, it will reset to
ORIG_HEAD before using git apply. If we haven't updated ORIG_HEAD, we'll
end up warping back to the top of the branch each time.
This problem can only be seen in very specific situations, in particular if
a generated BSP branches from qemuppc, and has a series of non git "am able"
patches. We fail, since all of the qemuppc patches are not applied due to
the branch head constantly being reset.
(From OE-Core rev: 5126ac0aeb3154d31769dc20a46b6b1a6b2e3d9b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be an error when parallel build:
[snip]
Traceback (most recent call last):
File "/path/to/tools/glib-gtypes-generator.py", line 304, in <module>
GTypesGenerator(dom, argv[1], argv[2])()
File "/path/to/tools/glib-gtypes-generator.py", line 295, in __call__
file_set_contents(self.output + '.h', ''.join(self.header))
File "/path/to/tools/libtpcodegen.py", line 42, in file_set_contents
os.rename(filename + '.tmp', filename)
OSError: [Errno 2] No such file or directory
[snip]
This is a race issue, the _gen/gtypes.h and _gen/gtypes-body.h may
write(remove/rename) _gen/gtypes.tmp at the same time, then there would
be the error.
There was a similar bug in telepathy-glib which was already fixed, we use the
similar patch to fix it here.
[YOCTO #5184]
(From OE-Core rev: b0f81f460cf96798d79d72da7a3246c321caf654)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enables building libav when x11 is not in DISTRO_FEATURES.
(From OE-Core rev: 9b7131e855293064e044cd79259eb350a14f319b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds info about tests run even if they passed (in case of errors log will
be printed anyway). Also some style change for qemu object.
(From OE-Core rev: 4adcf960be9c7477e314788d42b80753c2aaf572)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove a package from rootfs only if it's already installed. Also,
if a package is uninstalled, remove it from installed_pkgs.txt.
[YOCTO #5169]
(From OE-Core rev: b86dc63bc87763119fce8286f37f44361da824d0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, and
sstate_create_package stores SSTATE_BUILDDIR into a archive file by
tar, these two task can be run simultaneously for different packages,
and make a hardlink for a file will lead to the change of the links
number of file, and if tar is reading this file, it will fail with exit
code 1, and report "file changed as we read it":
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
4b3e353a5[sstate.bbclass: fix parallel building issue] tries to use the
tar parameter --ignore-failed-read to fix, but it does not work, and
tar parameter --warning=no-file-changed can close the warning, but can
not change the exit code. so close shell immediate exit, only fail
if tar returns not 1 and 0.
Exit codes of tar:
http://www.gnu.org/software/tar/manual/html_section/Synopsis.html
(From OE-Core rev: fad604b719e00b03e09da5fdb485e72332275b4a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With buildtools (which contains Python) installed on a build machine,
glib-2.0's gtester-report script was ending up with the full path to
the installed python binary in the shebang, which when rpm packaging
was used led to this being added as a per-file dependency by rpmdeps for
the libglib-2.0-utils package in which it ends up. This of course broke
do_rootfs when the package was included in the rootfs and had been
restored from sstate from another machine, as happened on the Yocto
Project autobuilder.
We were already trying to sed this script apparently only for the
shebang (since it appears that there are no other paths in the script)
so let's just sed the shebang properly; it also seems sensible to do
this for native as well instead of explicitly trying to exclude that
case.
Fixes [YOCTO #5205].
(From OE-Core rev: 1d16e8035dda062041394b1e51839a9a7d077cf5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we split S and B for avahi in OE-Core commit
6112a07f4e9865f7ae0e5a953669c1adf789f9f0, files left over in the workdir
from a previous build seem to break re-execution of do_configure. Bump
PR to give a fresh workdir and avoid this problem.
(From OE-Core rev: bdcddb4fa7ceb3408d687d4c39b0f631d3b31f96)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --enable-dependency-tracking option was added to workaround build
issues in libatomic. This fixes that build problem properly and removes
the flag since the dependency tracking code appears to be full of races
which are much deeper and harder to fix.
As per the automake manual, dependency tracking is only useful and worth
the build performance cost if you are doing more than one compile of the same
source code which in most cases we are not so this is a good thing anyway.
(From OE-Core rev: a3b665a80abed4c0659925e1cceb1568af023711)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| DEBUG: Executing python function sstate_task_postfunc| DEBUG: Staging files from /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/license-destdir to /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/deploy/licenses| NOTE: Using umask 002 (not 22) for sstate packaging| DEBUG: Preparing tree /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/license-destdir for packaging at /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build-populate-lic/license-destdir| NOTE: Removing hardcoded paths from sstate package: 'find /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build
-populate-lic/ \( -name "*.la" -o -name "*-config" -o -name "*_config" \) -type f | xargs grep -l -e '/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/qemux86-64' | tee /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build-populate-lic/fixmepath | xargs --no-run-if-empty sed -i -e 's:/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/qemux86-64:FIXMESTAGINGDIRHOST:g''
| DEBUG: Executing shell function sstate_create_package
| gzip: /lib64/libz.so.1: version `ZLIB_1.2.5.1' not found (required by gzip)
| tar: Child returned status 1
| tar: Error is not recoverable: exiting now
| WARNING: /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/temp/run.sstate_create_package.20384:1 exit 2 from
| tar --ignore-failed-read -czf $TFILE license-destdir
| DEBUG: Python function sstate_task_postfunc finished
| ERROR: Function failed: sstate_create_package (log file is located at /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/temp/log.do_populate_lic.20384)
NOTE: recipe core-image-minimal-1.0-r0: task do_populate_lic: Failed
Imagine:
pigz-native is used from sstate.
zlib-native is getting rebuilt.
pigz-native has some special handling to ensure its not used until the
system is ready. This is through a class and installing into a subdir of
PATH which only gets added in when we believe its available. We use
pigz-native in the image generation code and its in DEPENDS.
DEPENDS are guaranteed available for do_configure. do_populate_lic can
run before do_configure so the DEPENDS isn't met and I think this is our
corner case.I suspect ways of fixing this are to either:
a) force do_populate_lic after do_configure everywhere
b) statically link pigz-native
c) add in an explicit dependency to gzipnative.bbclass forcing
do_populate_lic after do_configure. If do_unpack handled a tar file in
an image, it would also be at risk of course.
Looking at each, a) is overkill and our dependency tree is nasty enough
already. b) sounds nice but is also risky since what happens if the gzip
binary is half copied when we run it. Our hardlink copying should deal
with that but I'm still nervous. This leaves us with c) so we could do:
do_unpack[depends] += "gzip-native:do_populate_sysroot"
The reproducer is:
bitbake pigz-native
bitbake zlib-native -c clean
bitbake core-image-minimal -c populate_lic --no-setscene -f
however your system needs to have an old version of zlib on it which
pigz-native can't run against. The line above fixes it.
(From OE-Core rev: 16cb83d13bdb7e1abc88c18ec224efcd9ceef4f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs-tools was failing occasionally due to version.h being missing. This
fixes the problems, thanks to several people on #yocto for helping out
why my lack of make knowledge of old fashioned suffix rules :)
(From OE-Core rev: 7be8010186889cece97829025d97d94f21c1f2e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class now consolidate the handle of UBOOT_MACHINE and UBOOT_CONFIG
variables and handle possible mistakes done by user when using these
variables.
(From OE-Core rev: 87d9b585b2784bec04e9e244dc52c6e929484fd0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
(From OE-Core rev: d0bc7a53b1e61283fb155b4dcb67bc2ab3b1d7f0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The processing needs to happen per recipe and thus it ought to use
annonymous python function instead to be triggered at event.
(From OE-Core rev: 75bde3ee02262cb3c6b91279ca277e3e5324ee5e)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscript sequence numbers are 00-99, so using 999 resulted in systemd warning
that it couldn't find "9oprofileui-server".
(From OE-Core rev: dac7dd70eb7a55ada5fdfc224aba5bac7c49f63f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that sysvinit images don't warn on every login only add it to common-session
if systemd is a DISTRO_FEATURE.
[ YOCTO #3805 ]
(From OE-Core rev: 3ccb0855a7a6b147e5025855c6376747ba72986a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's a standard way of announcing VNC services over mDNS that x11vnc
supports, so respect the feature and enable/disable it.
Also re-order the statements and drop the redundant PR.
(From OE-Core rev: e5443a0b5a70bf054cbeb6ff1fd6b5ef9d2347f8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The exported SDK only needs simulated root privileges for specific
tasks, such as the user-mode NFS server or rootfs extraction, and
oe-core does not support multilib builds in the generated SDK, so
it is neither necessary nor possible to build a 32-bit libpseudo.so
for a 64-bit SDK.
[YOCTO #5135]
(From OE-Core rev: 908b179b798704db74c886ec4c70c0942b09cb00)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has now been superseded by testimage.
(From OE-Core rev: d469c92394a1a95ae7a45b8b80dc4c2918e0e9a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the sanity test for DISPLAY being set to handle the new testimage
class rather than the old imagetest-qemu class.
(From OE-Core rev: d1297c2c3ae71de0e9e5cab36e582f5df8666391)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting TEST_IMAGE = "1" alone will now automatically run tests on the
image immediately after the image is built instead of having to add
INHERIT += "testimage" and run bitbake -c testimage <image> manually
(but that will still work). This restores functionality that was
present in the older imagetest-qemu class with IMAGETEST.
(From OE-Core rev: 72269a8fbec35c39af30fbabb1fa9ca7c5ee8d69)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the test "Test against HP-UX 11.11 bug:
No converter from EUC-JP to UTF-8 is provided"
since we don't support HP-UX and if the euc-jp is not
installed on the host, libunistring will be built without
iconv support and will cause guild-native configure fail.
(From OE-Core rev: 0470bd7a9658d3d8aa10e9d081f42b61b9b7a6f4)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcimodules can not work due to no modules.pcimap file, and has been
replaced by "lspci -k", so we can remove it.
Update lib-build-fix.patch since remove pcimodules-pciutils.diff.
[YOCTO# 5210]
(From OE-Core rev: 57bec61b05c0fea42f988dd52942c7d5ce8833fd)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- move everything in the same test. setUp/tearDown aren't quite
the right thing here, everything it's part of the same test. (and
it get's confusing when ssh fails)
ldd:
- change test name and add output to error message
vnc:
- remove unnecessary check as there is no point in doing
both ps and netstat. Also improve error output a bit.
(From OE-Core rev: 2f91bb438cfcdd0a40daed5902b6e98fc0aee67f)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It might be useful for debugging to have in the ssh log
the number of seconds a command has run.
(From OE-Core rev: 48b9e45b9716130b015ae2ab7398d6aa243933dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BASE_WORKDIR variable can be used instead of enforcing WORKDIR being
TMPDIR/work (and aborting the build if it isn't).
(From OE-Core rev: 176a36ace1624f3bbe498307aeabbd7935de14e6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make it easier to move WORKDIR, define it using the new variable
BASE_WORKDIR, which is the root of the work directory.
(From OE-Core rev: 1eee097f2e29b9d6934711c0b1d32e59e9542f53)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* temporary work around for build issue on armv4t:
| cp/decl.o: In function `bad_specifiers':
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7171:(.text.unlikely+0x24): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7173:(.text.unlikely+0x32): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7176:(.text.unlikely+0x3e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7180:(.text.unlikely+0x4c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7182:(.text.unlikely+0x5a): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7185:(.text.unlikely+0x66): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7189:(.text.unlikely+0x74): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7191:(.text.unlikely+0x82): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7194:(.text.unlikely+0x8e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7198:(.text.unlikely+0x9c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7200:(.text.unlikely+0xaa): additional relocation overflows omitted from the output
| collect2: error: ld returned 1 exit status
| make[2]: *** [cc1plus] Error 1
(From OE-Core rev: 148c7e990831ed708f7fb064ec8f05657a323850)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perf's builtin-sched.c triggers extremly long build times on some
architectures due to gcc 4.7+ var-tracking functionality.
To fix this, we can cherry pick the 3.12 commit:
f36f83f94 [perf sched: Move struct perf_sched definition out of cmd_sched()]
With this change build times are reduced from 15 to 20 minutes for qemuarm to:
real 2m19.940s
user 1m35.438s
sys 0m11.165s
For kernel's that are not carrying this patch, the following can be added
to the perf recipe to also fix the issue:
+++ b/meta/recipes-kernel/perf/perf.bb
@@ -68,6 +68,7 @@ EXTRA_OEMAKE = \
CC="${CC}" \
AR="${AR}" \
perfexecdir=${libexecdir} \
+ EXTRA_CFLAGS="-fno-var-tracking" \
NO_GTK2=1 ${TUI_DEFINES} NO_DWARF=1 ${SCRIPTING_DEFINES} \
(From OE-Core rev: 82ad5305381c2f541ef051a8fc28243cd91776fe)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREV to import the following MIPS configuration changes
4f689aa meta: remove ftrace/ftrace-disable feature
3058d81 mips: have the mips BSPs disable function tracing instead of ftrace
935f43f meta: add ftrace/ftrace-function-tracer-disable feature
0d72a03 mti-malta64: Default to support o32 and n32 userspace binaries
The first three changes improve the ftrace disabling fragments, to allow tracepoints
and ftrace to be enabled, while only disabling dynamic ftrace. This allows tools
that required tracepoints (like lttng) to be built against MIPS.
The mti-malta64 change adds n32 and o32 support to the default configuration to
support a broader range of userspace binaries.
[YOCTO #5215]
(From OE-Core rev: b2cadab5c7a5d3f772c34c04b759823ed6a122bf)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the meta branch SRCREV to import the following board support:
meta: add haswell-wc bsp for Intel Haswell Platform (Walnut Canyon CRB) scc and config files
Signed-off-by Ong Boon Leong <boon.leong.ong@intel.com>
(From OE-Core rev: fcca6317543e8be0bd2da1f45ac99448c24b4e48)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LDFLAGS is required or some old kernels fails due missing
symbols and this is preferred than requiring patches to every old
supported kernel.
Fixes [YOCTO: #5221]
(From OE-Core rev: 0eccbf2016e89e6f1c3796f138b02a508d2edbcf)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new QEMU_DONT_GRAB environment variable to disable grabs,
finally/hopefully solving the random hangs that the autobuilder has been hitting
for a while.
[ YOCTO #5131 ]
(From OE-Core rev: 32f9575a565f350649264c11eceba8311584b0fd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the mouse pointer enters the qemu window it takes a pointer grab. This
doesn't sound too dangerous at first but it turns out that SDL will infinitely
busy-loop if it can't get the grab (e.g. if the screen is locked) and the
average autobuilder setup's X server will have locked the screen a few minutes
after boot.
The result is that on many autobuilders apparently random qemu instances (the
top-most one under the pointer) will hang during boot.
To resolve this add an option (via an environment variable) to never attempt a
grab. The default behaviour remains to grab so that everyone else doesn't see
any change.
(From OE-Core rev: a60b1ebbb8f81245f3ccf25b3f9d63677de75b85)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
(From OE-Core rev: d9abcc0a2a691ca60cc1cb2f48f1748b0de73ac8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel build system does the right thing here and we should stop
overriding it. This code has been added based on a change from
'meta-metro' layer, revision 9d698004137c1a888d40d6a4808d94afa22387e7,
without any information about what problem it fixes so I am reverting
it.
Using the CFLAGS and LDFLAGS makes it impossible for kernel build
system to append to it, thus making the build fail in various ways as:
| CC /.../perf/1.0-r8/perf-1.0/perf.o
| In file included from builtin.h:4:0,
| from perf.c:9:
| util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
| #include <lk/debugfs.h>
| ^
| compilation terminated.
The unset is done in do_compile and do_install otherwise it /rebuild/
perf as it detects the compiler options has change.
(From OE-Core rev: 2e90f8846db0f3ed99a175befff9ec67fe12bc4e)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building cmake for native, we don't use the system libraries and
thus cmake builds its own internal version of libarchive; this requires
zlib, bzip2, and e2fsprogs. We can add to DEPENDS for the two former
libraries and patch out the latter.
(From OE-Core rev: fe6ca47a256b775e1aa5750b9dd31e27230cf781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As there are two alternative mesa recipes (mesa and mesa-gl), there needs to be
a virtual provider that recipes that explicitly need Mesa (such as xserver-xorg)
can depend on.
(From OE-Core rev: 4a407568472d3c87cd2ce11baf199568249640b6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates libtool.m4 (and its output) to resolve a problem
with variable 'lt_sysroot' not being properly updated if the option
'--with[-libtool]-sysroot' is not provided when running the 'configure'
script for a package.
According to the help text ouput from 'configure':
--with-libtool-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysrooot if not specified).
Due to mixed up cases in a switch statement, when checking if the option
was specified or not, wrong actions were taken resulting in an incorrect
sysroot and failures to properly locate e.g. .la files when using the
populated SDK toolchain.
For current upstream status see:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
(From OE-Core rev: f5cf7e1a5c85fb320faa9cbeef24f491706b4c1d)
Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a "File name too long" error when len(TMPDIR) = 410, this is
because the function getLocalPath() converts the filepath into the
filename, so there would be the error when len(filename)
> NAME_MAX, truncate the filename to meet NAME_MAX will fix the problem.
[YOCTO #5201]
(From OE-Core rev: 9f0427edee6bf62d3fe7cdceb07f59a5776c8c4f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
(From OE-Core rev: 83cb07047658e2e2b2d721e1b01553d4df3d8636)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some machines have hardware-specific GL drivers that do EGL and GLES (many ARM
boards). Others have their own EGL/GLES drivers and provide a Mesa DRI driver
(EMGD). Previously adding Mesa, for software GL/GLX rendering in the first case
and hardware GLX in the second, involved bbappends and changing Mesa to be
machine-specific.
By adding a just-GL Mesa the machine definition can combine it with the hardware
drivers cleanly.
(From OE-Core rev: f5a3a4bc33109181c741a2e66c13d0b45566e8fa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an "Argument list too long" error when the TMPDIR is in a
deep dir, for example, when "len(readlink -f TMPDIR) >= 350 (our
supported value is 410)". Use "$(foreach ,,$(shell echo))" to fix it.
There was already a patch which tried to fix this issue, so squash the
current change into the previous one as Bruce suggested.
[YOCTO #5138]
(From OE-Core rev: 4e10c45d7c61ac1ccf8b53ef525ca03d3d458bba)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: ba84662bd9fb7575e68c87449e986535a2216b30)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: 464d274e45bb94d9990577d85aa5ad02eb5da99c)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: daff19fe6f0490dc7036602e8b0ca40a23b55556)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It fixes the following failure:
"fatal: Missing privilege separation directory: /var/run/sshd"
when sshd is started through xinetd.
(From OE-Core rev: a343c32891aa46a7f7d5f0cc6d1266a387900dad)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-udevd is back in /lib, so revert this change.
This reverts commit 27bb516be4.
(From OE-Core rev: 3f6324a86cb8c1c253af06a1033ac71fa61c58d3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove both imake and the associated xorg-cf-files, as nothing has used imake to
build for a long time.
(From OE-Core rev: aa6d9296e7c7e5b96d868d9c17d639b4f33ca18e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The libqt-mt is tested by lsb-dist-checker and lsb-test-desktop,
and it locates in meta-qt3 layer.
So if meta-qt3 is not added, there should be a warning to call
attention; if added, it will add libqt-mt to RDEPENDS.
[YOCTO #5153]
(From OE-Core rev: f646f96015b408f4c6d56998f08178a69ed9f2a6)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update is needed to support generation of EFI boot images that
work with optical media. Specifically the "-eltorito-platform efi"
capability for mkisofs is needed.
[YOCTO #4100]
(From OE-Core rev: aaa85b0706197423786dfeae386dbb402ee15684)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to call the fat image creation multiple times it needs to be
in its own function. A future commit will make use of the new
function to additionally create EFI image files for use with an ISO.
[YOCTO #4100]
[YOCTO #1913]
(From OE-Core rev: 6d5181dc68766f42416a41f4988e8400d37fd7fa)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an error when the TMPDIR is long/deep, for example when
len(TMPDIR) = 350 while our supported longest value is 410:
[snip]
aclocal: error: cannot open xxx
autoreconf: aclocal failed with exit status: 1
ERROR: autoreconf execution failed.
[snip]
Let aclocal use the relative path for the m4 file rather than the
absolute would fix the problem.
Another fix is that we can modify autotools.bbclass to let it use the
relative path rather than the absolute, but I don't think that we have
to do that based on the following 2 thoughts:
* The coreutils is the only recipe which has this issue as far as we
know when len(TMPDIR) <= 410, because it has the most amount of m4
files (more than 400 ones).
* That would impact all the recipes which use autotools.bbclass, and we
are not sure about the side effect, for example, it would break the
build there is a sub-configure.
[YOCTO #2766]
(From OE-Core rev: 22ac874512c2c1213aae8e1644bd59050b37a63c)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vala-native builds were working because most systems have
bison installed on the host. Add an explicit dependency on
bison-native since bison isn't a sanity checked host tool.
(From OE-Core rev: 4bcc087290661544dd5f6466d2d6ab74488f34ec)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu
Saul Wold
Koen Kooi
Fathi Boudra
Andreas Oberritter
Petter Mabäcker
Paul Eggleton
Ross Burton
Sujith H
Lu Chong
Laurentiu Palcu
Christopher Larson
Jackie Huang
Michaël Burtin
Bruce Ashfield
David Nyström
Qiang Chen
Stefan Stanacar
Chase Maupin
Jack Mitchell
Ting Liu
Jeffrey C Honig
Riku Voipio
Richard Purdie
Victor Kamensky
Marko Lindqvist
Anders Roxell
Muhammad Shakeel
Maxin B. John
Valentin Popa
Felipe F. Tonello
Jonathan Liu
Cristiana Voicu
Diego Rondini
Martin Jansa
Chen Qi
Nobuhiro Iwamatsu
Otavio Salvador
Peter Kjellerstedt
Eric Bénard
Mark Hatle
Cristian Iorga
Tudor Florea
Nathan Rossi
Marius Avram
Jason Wessel
Roy.Li
Amy Fong
Belen Barros Pena
Joe Slater
Darren Hart
Lukas Bulwahn
Robert Yang
Randy MacLeod
Hans Beckerus
Anders Darander
Hongxu Jia
Li Zhijian