We did not have time to do this for 1.8. So, I restored the look
of the glossary pre-images. I did leave commented code in both
the glossary chapter and the style sheet for later.
(From yocto-docs rev: 9f1472b7d4cd86545e7927b0f693aafc88ae2791)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7535]
Removed this from two places.
(From yocto-docs rev: d169ce99610745e8c1b4b53d898f526e557af665)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the note that tells the user they have to initialize the
virtual environment every time before starting Toaster to the
correct location. I had it misplaced.
(From yocto-docs rev: 65258338e1ffb92ded573ea3b447b424b5f5fa97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some suggestions from Paul Eggleton to downplay the role
of this variable. It is basically ignored now in all parts of the
manual set except for the descriptions of the variable itself
and the BBLAYERS variable. I added some text reinforcing the fact
that BBLAYERS_NON_REMOVABLE is ignored by the build system and only
matters if you are using Hob.
(From yocto-docs rev: 98112751aaec6e25de48d9e3ee56592be3f53a07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review edits from Paul Eggleton.
(From yocto-docs rev: 4815556b6c9f45ce230afede7cb3b2aadf0bef1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton.
(From yocto-docs rev: 403c9ae5443eaf2a115e2224f07ee19f98c8139d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I could not get the embedded vids working very well. So we
defaulted to just linking to the Youtube locations directly.
(From yocto-docs rev: 95bef674ec04eec94f568ab00b94f7174d456011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user must re-initialize the virtual environment (if installed)
prior to starting Toaster each time.
(From yocto-docs rev: b0daa23784f17778f758b0572f90f9293a822812)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The docs are not building on CentOS and we think it is due to the
XSL templates being called for the Eclipse parts. I located all
the "current" templates and switched them out for "1.76.1" version
as are used by the mainstream doc builds.
(From yocto-docs rev: afbddde6524630433dfec973bbe886de32395bc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trevor wrote a nice paper (tutorial) on the use of devtool that I found
to be very helpful in developing the information for this new workflow.
I decided to publicly credit this effort with a small footnote near
the top of the section.
(From yocto-docs rev: 97d234f2d535f85e5a50ac4e7f0c0a79579cd004)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton reviewed the section.
(From yocto-docs rev: 82d9750b4349b3c54f73118ec7d65f0bb96e3f7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figures I added are for the Toaster manual.
(From yocto-docs rev: fb9bb83e48afd2e7d24d68f0c167d8d64f5d25fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the reference chapter in so it is included as part of the
mega-manual.
(From yocto-docs rev: 90a6ebabd0657d6dd7381a8c1fc7db5ea8b26a1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the three Toaster Manual figures to the list of
mega-manual figures so they will be included in the tarball
generated for mega-manual.
(From yocto-docs rev: 2190bc43dfc20c0c0ef5da82c85570f9294e1788)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new package data, and cleaned up whitespace.
I've also corrected some packaged data (replacement-tar from
my reading of the recipe is the tar normally found in distros).
One issue this patch exposed st I haven't had a chance to track
down is that when you attempt to get distrodata from
gcc-crosssdk-initial-x86_64. The produced .csv in tmp/log
is missing the Distro information. bitbake -e
shows that DISTRO_PN_ALIAS isn't even getting set in this case.
My guess here is that something is happening with the "_"
along the way, I've just not found it yet.
(From meta-yocto rev: 8c0ff20efbe7649e5790227e265b0119b0c8bc02)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is particularly problematic since qemu images switched to ext4 by
default and now cannot work properly with UIs like hob.
This patch adds in ext4 to the appropriate variable fixing this.
[YOCTO #7426]
(Bitbake rev: a1431b1b85bf90ed5f771552d0ce91de288047d4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
self.appendlist is a dict and as such unordered. This can lead to cases
where appends with different names (e.g. x_%.bbappend vs. x_123.bbappend)
can be reordered in application which in turn reorders the variables
that those bbappend files might touch. Reorderd variables changes the sstate
cache signatures causing real world issues.
To avoid this, use a list for the append files instead.
This patch is conservative and just adds a new data structure alongside
the existing one and uses it to resolve the core issue. Later patches
(post release) can handle some of the wider but less problematic ones
(e.g. issues in bitbake-layers flatten).
[YOCTO #7511]
(Bitbake rev: f980f060cd0d1e7fe5011f3c325c1b254f05eccf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is particularly problematic since qemu images switched to ext4 by
default and now cannot work properly with UIs like hob.
This patch adds in ext4 to the appropriate IMAGE* variables fixing this.
[YOCTO #7426]
(From OE-Core rev: e6aab245623b6ba1ca5f06632d1028c863cef737)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 1a86ed8f95649c5f5a3a66984ce36978d93b0e01.
Bug [YOCTO #7334] was incompletly fixed, and the proper fix is
not straightfoward. Consequently we revert the partial fix, as
a incomplete fix is worse than no fix.
(Bitbake rev: 3d838ddc2f1f92e2dd940e43c3467f6ba4ba043d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds "ext4" as a selectable option in IMAGE_FSTYPES,
to keep in sync with the OE-Core capabilities.
(Bitbake rev: e5a44e1096ba62b50bed4eee191f109c4f2c4105)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recent round of informal user feedback has revealed
that the term 'target' is quite problematic. For
all the users we spoke to the word refers to the
target arch. In Toaster, it refers to the software
you build.
This patch replaces the word 'target' with 'recipe'
across the Toaster interface. This is by no means
self-explanatory, but at least it cannot be confused
with target hardware, and it is also consistent with
the terminology we use in the analysis portion of
the interface.
(Bitbake rev: f4a64c2386a534aae9522629afde219d2aa00817)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch prevents errors being thrown on date limit
computations if the build list is empty.
[YOCTO #7513]
(Bitbake rev: d028fbe76962f3b86239633a0951626dfa66b8af)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add mappings for i586-elf, x86_64-elf and arm-eabi to binary lookup
table which allows for a variety of baremetal toolchain generation.
(From OE-Core rev: bf628a2fb1da704ff2a0f24c774eafdd12a081fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Teach siteinfo about x86_64-elf so that baremetal toolchains parse/build.
(From OE-Core rev: 15ce2e6af8911db9d3d5181efdd924666eca928d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You don't need NFS/TFTP for a plain USB setup.
(From meta-yocto rev: 904facdf56028d63d938e07c459169cbe78ef8fe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update the toasterconf.json file for the fido release.
A small update to the release help text in the
toasterconf.json file shipped with the meta-yocto layer.
We now make explicit that Toaster will build with the
tip of the selected branch. We also link the
Yocto Project Dizzy release to the git repository,
and not to the release page on the website.
(From meta-yocto rev: 8b4367e3b56285add7c8080a6a99e5005d03c8b7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using bitbake to do the setscene as part of sdk setup, it would be
useful to have a log in the case where it fails.
The log is called preparing_build_system.log and is in the top level
directory of the extracted sdk.
(From OE-Core rev: 698019f6bb1f72f079cc2cb051e665620bf551a3)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hardlink count duing do_package_write_deb can change causing dpkg-deb
failures. We don't care about this error case so avoid it by checking
the tar exit code.
[YOCTO #7529]
(From OE-Core rev: 8ee36a5f2f9367550d28bf271afc53bca6ff3d5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SystemD D-Bus configuration should only to be installed when
SystemD support is enabled.
(From OE-Core rev: e54f2569f4fb880387edc6a99d790b765ae33080)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolve mismatch between U-Boot configs and uboot image name.
The ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX} may alway be false
and repeat compile or install so we need to check if ${type} match ${config}
(From OE-Core rev: c3c7265aa3931d47af53433f3c2d25f0e447d52e)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preprocessor macro values present in art_config.h
differ for individual architectures, basically libart-lgpl recipe will
pick up correct art_config.h file based on
ART_CONFIG = "${HOST_ARCH}/art_config.h"
and thereby having correct preprocessor macros definition
of each architectures.
(From OE-Core rev: b4c927392cbf97556a654baa83ceb4bb27faba98)
Signed-off-by: Krishnanjanappa, Jagadeesh <jagadeesh.krishnanjanappa@caviumnetworks.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code detecting empty patches after removing files with
file_exclude failed for commits which were already empty before (like
the initial commit in some repos): such patches are completely empty
files, without a From line.
Detect that case and just let the normal empty patch detection deal
with it.
(From OE-Core rev: 3e310b8cd603539a2de115b2b73e1db35403b426)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"filterdiff -x ./some/file" does not remove changes for some/file.
We must be more careful about constructing the path name and
only add the prefix when it really means a directory.
While at it, also better normalize the path in copy_selected_files()
early on, to handle double slashes. Useful should the function ever
gets used for something other that dest_dir (which gets normalized in
sanity_check()).
(From OE-Core rev: 8ea63c6c920c39e5a4ba176223fe472f92e2632a)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Empty dest_dir is basically undocumented behavior. The sample conf
only mentions using just a dot for the current directory. In practice,
the empty string does not work because of code like this:
def action_splitpatch(conf, args):
...
if dest_dir != ".":
filerange_root = '%s -x "%s/*"' % (filerange_root, dest_dir)
However, the empty string was not explicitly checked for, leading to
strange errors when trying to apply patches:
[12:50:23] Applying: foobar: xyz
fatal: unable to stat newly created file '/foobar': No such file or directory
This patch turns the empty string into an alias for the dot. This seems
more user-friendly than throwing an error. This alias is intentionally
not document in the sample conf, because the dot is clearer and works also
with older copies of combo-layer.
Instead of checking for both all the time and normalizing the path when
needed (as done in some places), rewrite the value in sanity_check()
and then only check for '.'.
(From OE-Core rev: f8cdbe749755dc769150d3a6c2c54318c80e1562)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Glibc test suite contains several c++ files. They are built
with g++ -nostdinc. In this case the location of c++ include files
needs to be specified explicitly, or the programs may fail to build.
The header locations are assumed to be:
sysroot/usr/include/c++/<version>
sysroot/usr/include/c++/<version>/<machine>
The new code parses "configparms" to get the actual CXX and sysroot
used for the glibc test suite, then it queries CXX to determine
CXX <version> and CXX <machine>. With the known values for <version>
and <machine> the code composes a new value for c++-sysincludes
and appends "configparms" with that value.
[YOCTO #7081]
(From OE-Core rev: 35cd410bd3cfcd072df29e36cfe66b2c14cd3841)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-git-proxy script needs socat. If socat is not found,
an error message is issued on STDOUT. This leads to a misleading
git message:
fatal: protocol error: bad line length character: ERRO
instead of the intended message:
ERROR: socat binary not in PATH
Redirecting the error message to STDERR fixes this issue.
(From OE-Core rev: 960a7f7ae24e72efc165a431f8b91b3f3b176916)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For recipes with PACKAGES_remove = "${PN}", the find which removes .la files
can race against deletion of other directories in WORKDIR e.g.:
find: '/home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/sstate-build-populate_lic': No such file or directory
| WARNING: /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/temp/run.do_configure.6558:1 exit 1 from
| find /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7 -name \*.la -delete
The simplest fix is to add the find option which ignores these kind of races.
[YOCTO #7522]
(From OE-Core rev: dd8099ca3092fbd5c685e5ef1b1c5a8185a6893d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a baremetal build, TARGET_ENDIAN_OPTION isn't set leading to build
failures. Add in ifdefs to avoid this.
(From OE-Core rev: 3a50ec5f0142cc3a74b405dbdff264f8f862edfa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel_configme task was added twice (once in the .bbclass, one in a .inc)
with different ordering constraints.
Change this to be just one definition in the bbclass with the stronger ordering
constraints.
(From OE-Core rev: b9646b9d31c3e0c70337a8c10ebfc087a0e2b829)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autobuilder failed like this:
temp/run.do_kernel_metadata.25242: line 165: createme: command not found
createme is provided by kern-tools-native. do_patch has a dependency on
kern-tools-native, but do_kernel_metadata runs before do_patch. So move the
dependency from do_patch to do_kernel_metadata, moving the statement from the
.inc to the class so it's alongside the task definition.
[ YOCTO #7531 ]
(From OE-Core rev: 4a0371847ff0c30d9b60db63559d89dddfcb009f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update the toasterconf.json for the 1.8 "fido"
release.
A small update to the release help text in the
toasterconf.json file shipped with the
openembedded-core layer.
We now make explicit that Toaster will build with
the tip of the selected branch, and we add links
to the OpenEmbedded repository.
(From OE-Core rev: f5af78cabb693692fa369730af4b0c70cca9bc91)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch removes the symbolic links from the artifact list.
[YOCTO #7184]
(From OE-Core rev: cbb64f85dabefe267519e4b983d73c864b41e876)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Beth Flanagan
Richard Purdie
Alexandru DAMIAN
Belen Barros Pena
Paul Eggleton
Belen Barros Pena
Randy Witt
Otavio Salvador
Chunrong Guo
Krishnanjanappa, Jagadeesh
Patrick Ohly
Juro Bystricky
Ross Burton
Robert Yang