The list of images has grown. I added all images reported in the
1.1_M2 build using the 'ls meta*/recipes*/images/*.bb' command.
(From yocto-docs rev: 62e12a71c73a5e3a20c6887d754a96eb9e754b48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 5061f9e8b3cfb66b2ed17befc9c4c4d8b875f4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entry previously stated that only Python 2.6 is required. I
added Python 2.7 to that requirement. I also changed the URLs that
point to our pre-built tarballs from which the user can get Python
2.6 to be in the yocto-1.0 download area. They were pointing to
an area in the index of downloads that was up one level. According
to Beth the official location is
http://autobuilder.yoctoproject.org/downloads/miscsupport/yocto-1.0- \
python-nativesdk.
(From yocto-docs rev: f5ba36dee8094209fa6d3c6f97656588ded0567f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1104: The section that describes how to customize images
with new features failed to mention the variable EXTRA_IMAGE_FEATURES.
I added text to include that option and referenced the variable.
(From yocto-docs rev: 128b53594be02e486ca3f4658b9f93b9913a3972)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1104: The section describing the local configiuration file
local.conf lists out variables used. One variable it had in there
was IMAGE_FEATURES. This variable is not in local.conf. But,
EXTRA_IMAGE_FEATURES is the variable that is there. I corrected this.
(From yocto-docs rev: 2698d0fc61adc8971a84436529a54190c998d4d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Images reference section states you can control what features are
in an image by using the IMAGE_FEATURES variable. It failed to mention
the EXTRA_IMAGE_FEATURES variable. I included this variable in the
discussion.
(From yocto-docs rev: 6c7789bd409f43a3978c09c43db31010bc461573)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a cross-reference to the EXTRA_IMAGE_VARIABLES glossary
term and provided more explanation describing the relationship
between the variable and the IMAGE_FEATURES variable.
(From yocto-docs rev: 227c11b8d81e9ae266b7e60172d0a5e9e1237ed0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1104 - Added a glossary entry for the EXTRA_IMAGE_FEATURES
variable.
(From yocto-docs rev: f81a85322d944d33484da73020593891811a045a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an entry to represent the Yocto Project 1.0.1 Release into
the manual history table for all of the manuals except the Yocto
Project Quick Start, which does not have a table.
(From yocto-docs rev: d2c570b18854b3f15dfb20436a2212f569e96d5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes fix the following issues:
1. Multiple Makefiles. There really is no need for this.
2. Unable to maintain more than one version of the docs on the webserver.
This is a quick fix to enable the above.
In order to build the documentation, at the top level, issue a:
make all DOC=<doc directory name>
make all DOC=kernel-manual
Also, some changes need to occur on the webserver to fully
incorporate these fixes.
http://www.yoctoproject.org/documentation/
The docs are now published to:
http://www.yoctoproject.org/docs/<Release MM.mm>/<doc name>
The main page should be changed to point not only to the current doc release,
but also to the prior releases. This will enable us to maintain prior release
documentation without stomping over it when we publish new docs. Also, we'll
need to repoint the yocto-quick-start link to yocto-project-qs. Or rename
documentation/yocto-project-qs/* to support the website naming.
(From yocto-docs rev: 2651790d80fd32cd4619eeb5375f6ee28e7e7fda)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new FAQ entry per Richard Purdie answering the question
'How do I use an external toolchain?'
(From yocto-docs rev: 58b78df0d78637234cbcb0e70e225b72ba0f9a2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section 2.1.1 BitBake I added a paragraph at the end of the discussion
about BitBake explaining the benefits of the '-k' and '--continue' options.
(From yocto-docs rev: 409e01cedbe8d93c29856fa2a49d5f9db91f5201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new entry for we do not support spaces in filenames.
This entry was suggested by Richard.
(From yocto-docs rev: 27d7f951056fb55bddcd7a71374359583c635073)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the hello_2.2.bb example to hello_2.3.bb
(From yocto-docs rev: b1d07533b82a37aa5e52ebdbb3e9629e2b8ba549)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the hardcoded name from the publish option. This involved
updating the Makefiles. The publish option is still temporary as a
more permanent solution is being created.
(From yocto-docs rev: 6878b2ccdb98b18c438ca419e1caad0041a2bc00)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_807 - I updated the description of the BBFILE_PRIORITY variable
to provide more detail. Input from Tom Zanussi on this fix.
(From yocto-docs rev: 90f9fd0c3bcf5c772423fa53f1f00579eba1bdeb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory screenshots is no longer used in this manual. Previously,
only one file (ss-sato.png) was used and I have moved it to the
figures folder.
(From yocto-docs rev: 1c75a62b33910ff951601dedd32b79bebb41090c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have removed the multi-colored POKY image that was used for
the title of the Poky Handbook. The image I put in here is in
line with the other graphics used as titles for our Yocto Project
documentation. To accomplish this I had to create and add a new
PNG file named poky-title.png. I placed this image in the figures
folder. I removed the poky-ref-manual.png file (old figure).
I also had to alter the Makefile to use the new figure as part of the
tarball. Finally, I had to alter the HTML style sheet (style.css)
to include the new file.
(From yocto-docs rev: 6c44fca054c1c105daea6fa42f89a7f78a6d12cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved this file from the screenshots directory to the figures
directory so that all figures would be in the figures directory.
(From yocto-docs rev: b61915e6cdf7dfedc4588cd59f252088a1069b65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed two figures from the figures directory:
cropped-yocto-project-bw.png and yocto-project-transp.png.
Both figures are relics and not used in the manual. I also
altered the Makefile to pull the ss-sato.png file from the
figures directory instead of the screenshots directory. I moved
this PNG file from the screenshots directory to the figures
directory so that all figures would be in the figures directory.
Finally, I updated the introduction.xml file so that the html
code to include the ss-sato.png file pulls it from the figures
directory and not the screenshots directory.
(From yocto-docs rev: daa15c232d8c46d94cafd080e03318c733ec089f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_956: I updated the publish option so that the HTML and PDF
versions of the manual are automatically pushed to the Yocto Project
website. This fix takes care of BUGID#_956 for the Poky Reference Manual.
(From yocto-docs rev: aed87d15ce9df0835b704fda1e9d8f464d070e32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the remote publish URL used to push the HTML and PDF files to
the website.
(From yocto-docs rev: c5c170c582ca0a483aca13b7ddaa7f4d99a3aaf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a reference to the pokylinux.org home site. I commented this
item out so it does not show in the user documentation. I was unclear
on whether the reference should have been entirely removed from the manual
or not.
(From yocto-docs rev: 1cda8aab1336cc81648536e1f7d2777047673a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a link whose URL was http://autobuilder.pokylinux.org:8010.
I changed the link to use yoctoproject.org. Note that this URL
was not visible to the reader in the manual. However, it was there
in the DocBook code.
(From yocto-docs rev: ca1cf9fb404f148fe4f0868630dc4f109231c5c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID#_1004] - The statement indicating to comment out EXTRA_IMAGE_FEATURE was
incorrectly shown as IMAGE_EXTRA_FEATURE. I corrected this.
(From yocto-docs rev: e18da2d4e4520a60045f869ca0c63a34c16e3e89)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I got rid of the <filename class='directory'...> and
<filename class='extension'...> and replaced with simple
<filename>/</filename> pairs.
(From OE-Core rev: 1bcdaf8d3d39680c154144227ee2caca9a7bb3e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In section B.1 (Parsing) it said that BBFILES variable by default
specified the direcotyr 'meta/packages/' as the place to look for .bb
files. This directory is invalid and needed to be changed to
'meta/packages/'.
(From OE-Core rev: c48325b1f23201a1e7790bfd7c52191baf14878f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to some changes in the file structure for 1.0 there is a new directory
for the shared state. The variable SSTATE_DIR can be used to point to
the directory. I added this variable to the list of documented variables.
(From OE-Core rev: fe939d7181856145ea26c193be131883da182fcd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits reflect changes in the directory structure from the 0.9
version of the software to the 1.0 version. This set of changes still
is missing a few items. Changes were based on Saul Wold's input.
(From OE-Core rev: 6288e2af1b05d849e53b90071c66bc893ba015b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the various styles for commands and such and replaced with
simple <filename>/</filename> pairs.
(From OE-Core rev: c5a0cc3e6a2f1e7eb1a90c67d2a038d3dc18b1ba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section C.2 (Autotooled Packages) was re-written. I removed a bunch
of <variable> tags and replaced them with <filename>. Also removed
some Britishisms.
(From OE-Core rev: 7a932962fb8f0dbfe14eb2d3636ddbb1c974b947)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to fix the <variable> tag by replacing it with <filename>.
Previous commit didn't work so this is fixing it.
(From OE-Core rev: 263e572055b09ad2f432f1feda797813ef254e74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I got rid of the <function> tag and replaced with <filename>. We
have too many styles.
(From OE-Core rev: 5ac97ba191c8707ff20105626427998df997d221)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section B.4 (The Task List) had the typo "taksks". Changed to
"tasks."
(From OE-Core rev: 7cbd6bb020e16ceb1894a408852648a915f193f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section B.2 (Preferences and Providers) had a grammar error.
It said "An common example is..." I fixed it.
(From OE-Core rev: 6d04a9ff381b7771b6f080928d4416b76e76cbb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced varname style with filename style. Looks better. We have
too many styles.
(From OE-Core rev: 1b63d69c3c2e4b5561dc59d020b59d875420872f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section A.1.1 (bitbake/) contained two URLs. One supposedly went to
a BitBake site and the other to the BitBake online manual. In reality,
they both went to the online manual. I removed the one referencing
the site.
(From OE-Core rev: 02c360c3e57409a3982db73ed2b998a7c58610a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 5.3.2 (Using OProfileUI) was out of date. Several of the URLs
would not resolve. They were pointing to openedhand links that had
not been maintained. I updated the entire section.
(From OE-Core rev: 4678fcba5ab02669009d0ab67ec802f2ce1b087f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In section 5.2.2. (Building the Cross-GDB Package) there was a resulting
directory listed where you could find the binary. The directory had
a couple of variables for 'host-arch' and 'target-abi'. There was
a mis-guided angle bracket wrapping the 'host-arch' variable. This
was fixed.
(From OE-Core rev: a4fbf5caabb9ded34885612ae093759c82d7d2cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented out a large section of the chapter, which went into detail
on how to locate, install, configure, and use the Yocto Ecliple
plug-in. This information is redundant in this book and is better
explained in the ADT Manual. I am referencing the information from
this chapter now.
(From OE-Core rev: f4f4efbf3f0b19fdb05ddf48ab48b4f42109a289)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the revision history table for the manual.
(From OE-Core rev: 65c7bb8489de654cc02dcff0dfff21754e2e5ce8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In chapter 2 where we talk about building images I added a new
note indicating that the user should not switch around using different
GPL versions when trying to rebuild an image as it can cause dependency
failures.
(From OE-Core rev: f84441dbcc8254062d55d2452d3d6f4bc6f907fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 873] - Added a note in the Images Appendix indicating that
building an image without GPLv3 components is only supported for
base and minimal images. Also put the two changes you have to do
to the local.conf file for the build.
Added a note in the second chapter in the section on building images.
The note indicates the same as in the appendix but does not go into the
local.conf file detail.
(From OE-Core rev: c7960a2e820d7ddb8649ab0b27b3f04843f7af0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an explanation on how to get by the proxy or around the
firewall when Poky is trying to find and download sources.
(From OE-Core rev: 426df8458bb37c81afc6fe03f0e1300985c8d059)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the path 'meta/packages/formfactor/files/config'
to 'meta/recipes-bsp/formfactor/files/config' per Joshua Lock's
instruction for correctness.
(From OE-Core rev: b89ea64db2978f0ec9271565590a5a0529d396f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various small edits and format changes.
(From OE-Core rev: 259128eb1b7676a71d5c0df4ef5db065ba5c3c88)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some minor edits.
(From OE-Core rev: bb6fbb484ec912aabca77fd4d124c97fc7f956e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added three FAQ entries per Joshual Lock.
1. How do I disable the cursor on my touchscreen device?
2. How do I make sure connected network interfaces are brought
up by default.
3. How do I create images with more free space?
(From OE-Core rev: 9cfed91ee7c0a619e52abc098c20d6ed8b69416b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forgot to search for "Bitbake" occurances. These are now changed
to "BitBake."
(From OE-Core rev: 982826b61bf68244fad46ef52b5a203e648e330b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a grammar problem and then did a search and replace for
"bitbake" to replace with "BitBake".
(From OE-Core rev: a25074cf7f3383ea3963c4dabb9507af34f2e3df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed several occurances of "Yocto Project" to "the Yocto Project."
Also changed the statement about what Poky release the book supported.
It previously said "applies to Poky Release 4.0 (Laverne)." I changed
this to "applies to Poky Release 5.0 (Bernard)."
(From OE-Core rev: 021bc37ad0698c567f9b7089fde99fe985ae3551)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed a link to the Intel Website. Upon testing this link I
discovered that it loads the Intel site into the current web
page and then disables the back button. Rather annoying. I tried
to change the link to pop a new window but couldn't get the
ulink.target parameter to work. Ran out of time to try and figure
it out so I removed the link.
(From OE-Core rev: 8f75a06300714938e79800e0e140dd76ba42de86)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a spell check and corrected several problems.
(From OE-Core rev: e26e9f41eac1bb34a7d9276921d14e843444622d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title page by adding a new revision entry for the manual.
Not sure of the current revision numbering scheme so I reset it to
Revision 1.0 to match that of the release.
(From OE-Core rev: 1604f6543eba3757b08bff96e75d045b809de544)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have updated some styles so that the GIT manuals are looking more
consistent and have better color schemes for the section headings.
(From OE-Core rev: 747dbbf250b96cf43eba2b7227226607b9605da4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A spell check performed on this chapter.
(From OE-Core rev: 20ef5e573e0c835a2f359f61aa89993c3a2244a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 293] - I added text at the end of section 3.2.3 "Customizing Images
Using Custom IMAGE_FEATURES" to include explanation of the two servers
Poky uses for images by default. Also how to change the variable
IMAGE_FEATURES to configure the server. This change is part of the
fix for BUGID# 293 and was suggested by Scott Garman.
(From OE-Core rev: 13041874070ea2235f8c3abe156ae5e940b15f5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In appendix I in the Contributions section (I.6) there is
mention of a Poky contributions tree and the URL
git://git.pokylinux.org/poky-contrib.git is given. I changed this
URL to git://git.yoctoproject.org/poky-contrib.git.
This is a partial fix for but 553.
(From OE-Core rev: 982ff35cad0276eb74eae170d21ead0edd3a1072)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text after the bulleted items "The Poky website" and "BitBake Uer Manual."
These were blank and it was not consistent with the rest of the list.
(From OE-Core rev: a820c07796dc478154b7e5ee4e590a425b981e8a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the "Bugtracker" section (appendix I - I.2) there is
a reference to the bugtracker. The text shows just the string
"bug tracker" but the hidden URL was http://bugzilla.pokylinux.org.
I updated the text to say to report problems by using the Bugzilla
application and then gave the URL http://bugzilla.yoctoproject.org
as the reference.
This is a partial fix for bug 553.
(From OE-Core rev: 94f7132e56699c9f9f8dc43d6a1271294c5cbe26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the FAQ appendix item H.12 there was a reference
to http://pokylinux.org/sources/* in the question portion. The
reference should really be http://autobuilder.yoctoproject.org/sources/*.
I made the change.
This is a partial fix for bug 553.
(From OE-Core rev: fb56ac6021fe09cb386c168f3fe0b11e04214972)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In "The Anjuta Plug-in" section (5.1.2.2) there was
an URL to the source for the Anjuta Plug-in. The URL had the
pokylinux.org string in it and pointed to the old area. I changed
the URL to http://git.yoctoproject.org and directed the user to
look under IDE Plugins.
This is a partial fix to bug 553.
(From OE-Core rev: 0a1d8f48c8a2120ba57017e1fcf270c677486266)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In "The Eclipse Plug-in" section (5.1.2.1) there were two
URLs referencing the place to get the Eclipse plug-in. One specified
the URL to put into the HTTP:// field in the Eclipse IDE when installing
the software. This URL was incorrect. I replaced it with the correct
URL, which was http://www.yoctoproject.org/downloads/eclipse-plugin/.
The second URL that was fixed was referencing the source code for the
plug-in. It had the old pokylinux.org string. I changed it to
http://git.yoctoproject.org.
These fixes partially address bug 553.
(From OE-Core rev: 6871c913e0dae338708f74dbbe94cfe2fc498018)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the Development Checkouts section (1.5.3) there was a
reference to our git repository located at git://git.pokylinux.org/poky.git.
I changed this to git://git.yoctoproject.org/poky.git. This is a
partial fix to Bug 553.
(From OE-Core rev: fe4ed51c121b8f1445a0999e411c54270321e025)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the Releases section (1.5.1) there was an URL to
http://pokylinux.org/releases. This URL was old and I replaced it
with http://yoctoproject.org/downloads/poky. This partially fixes
bug 553.
(From OE-Core rev: e66d4b53c773d76f2f05c574132796e2fdcf6ebd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the Development Checkouts section (1.5.3)
there is a reference to
http://git.pokylinux.org/. This URL resolves to an older looking
source area. I determined that the URL
http://git.yoctoproject.org/ resolves to the newer Yocto source
web interface so I changed the URL to that.
This is a partial fix
to Bug 553.
(From OE-Core rev: 18f0124db5c10ea23698ca0c469d4dfde89adf43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the nightly build section (1.5.2) there is a reference to
http://autobuilder.pokylinux.org/. This URL resolves to an autobuilder
page that has a bunch of pokylinux links. I determined that the URL
http://autobuilder.yoctoproject.org/ also resolves to the autobuilder
page so I updated the URL to use the YP link. This is a partial fix
to Bug 553.
(From OE-Core rev: b1c7055dead4badd14872105c49466cbf86d3b54)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added command 'ls meta*/recipes*/images/*.bb' as the command to see the
supported images. Also added poky-image-lsb as an image and noted
that poky-image-sdk has becom poky-image-sato-dev.
These fixes are in response to alpha testing for release 1.0 Yocto.
(From OE-Core rev: aa2bdf7c26486961e040c95f17789064968eb9c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the fix for #628 I added a new question to the FAQ for use
of Poky when you do not have Python 2.6.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Discovered that the manual was not making correctly due to a stray
</literallayout> statement. I removed this statement and the manual
now builds.
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
Cyril submitted a patch via email form for several spelling corrections. The master docs, however, are not up-to-date with what I have on my contrib area. Many of Cyril's corrections were already addressed. A few were not and I have updated them here with this commit.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There is inconsistent use of how BitBake is spelled. Sometimes it uses no capitalization, just a leading "B", or "BitBake". I looked at the BitBake manual and it seems that "BitBake" is the correct way to refer to it.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I pulled the openembedded mailing list information and provided information for yocto@yoctoproject.org, yocto-announce@yoctoproject.org, and poky@yoctoproject.org. I also updated the IRC section to include both #poky and #yocto channels.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added an entry in the glossary for INC_PR. Also updated section
"Package Revision Incrementing" to mention the use of INC_PR in conjuntion
with the PR and PV variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I am using "xxxxxx" task as the way to call out a specific task in the
text. Previously a mix of <function>xxxxxx</function> and the "xxxxxx"
methods were being used.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Because I am single-sourcing the bsp.xml file that is used both as
chapter 4 in the Poky Reference Manual and as the singe file in the BSP
Guide I removed the bsp.xml file that was local to the poky-ref-manual
folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>