Wind River uses binary toolchains provided by Code Sourcery, but which
have different values for a couple of the preset variables than the
generic toolchains the external-csl toolchain feature supports. If
these values were ?= assignments, we could just assign values to them
and share the code, rather than keeping modified copies.
(From OE-Core rev: f3c50743917974f0eeab6d9eefc2e7b572a8a787)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fixmepath file that is generated contains a list of all of the files
that need their paths fixed. In the previous version the fixmepath was
generated to include all of the files that sed may have changed. In the
new version, we first grep the files to see if they contain a path that
needs to be changed, only then do we perform the sed operation on those files.
This results in a modest performance increate in the creation of the sstate
file. The following numbers include the do_package and do_populate_sysroot
tasks on the perl recipe.
Before the change:
real 4m23.018s
user 1m57.067s
sys 1m33.327s
After the change:
real 4m13.083s
user 1m54.062s
sys 1m26.064s
However, a more significnt performance gain is felt during the
extraction/install of sstate cache files, as the fixmepaths file now has a
significantly smaller list of files to modify.
Before the change:
real 0m39.798s
user 0m11.158s
sys 0m12.642s
After the change:
real 0m25.511s
user 0m8.408s
sys 0m5.077s
(All numbers above were recorded with a cold filesystem cache on a machine
with 12 GB of ram.)
(From OE-Core rev: 46067264bedeff8248a2b2441733420fe6651f84)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The location of the ccache should not affect the sum in the sstate
files.
The end user should be free to use an external ccache via defining
CCACHE_DIR to a new value in local.conf or using the default per
package local ccache in the temp directory.
(From OE-Core rev: 8d49d92fc2e581820e410c6a4dceb30911d949e0)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are things that depend on the -xlib package. There are two
possible ways to fix this, either recommend them instead of depending
on them, or allow the package to be empty. I'm doing the latter
since its a bit cleaner and less invasive.
This library is a bit pointless which is why there is little point
in adding the x dependency in the non-lsb case. If it becomes widly
used we can rethink this.
(From OE-Core rev: 7d49da7389b5bb0e74d9000b002ebf0bc554e85b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The =~ operator is not one of my favorites, not just due to portability
issues, but because it's not well known, and a lot of people might
not expect a regex operator.
The canonical shell idiom for this is to use case with alternation
and wildcards. As a side note, if you are matching anything containing
core-image-sato, you don't need to also check for core-image-sato-sdk.
(From OE-Core rev: 716ae8dbd1fb29292c9fca0f59d3807a54508e87)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the ofono-tests python scripts, such as test-modem and
receive-sms (22 in total) import gobject. Make the ofono-tests package
depend on python-pygobject.
Tested on the meta-intel fri2 BSP in a core-image-sato image. Assorted
ofono tests run correctly.
(From OE-Core rev: 30708f1b5bc3844e080ef863fdd22446700ba0b1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
(From OE-Core rev: 36d1717e2ad4ca1620ee9f01b524b5ff2f499b26)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We anticipate signatures being shared amongst peers in a group so ensure
they have rw-rw-r-- permissions to facilitate this.
(Bitbake rev: e4716f316152cafabebcefec7b387edeb02ad3eb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Python documentation states:
"When opening a file, it’s preferable to use open() instead of invoking
the file constructor directly." [1]
Further in Python 3 direct use of the file constructor is no longer
possible.
1. http://docs.python.org/library/functions.html#open
(Bitbake rev: 759f953e29a7131614e5b1f0312edf2b17523675)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With floating revisions and no specified branch, the fetcher could fail
with some obtuse errors. This was due to the branch name being set to None
which makes no sense. This patch reworks some conditions to avoid this.
(Bitbake rev: 740c58d43cfb1445dd126e4827bb70ce988ca107)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the comment says, using packages[0] is rather broken and can be incorrect,
as demonstrated by the recent gdk-pixbuf change. Replacing it with PN is
a bit more correct and more likely to do what was originally intended
by this function.
(From OE-Core rev: 5d0144fe6bd1febc2d1e651bbcff891c80f20b88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BITBAKEDIR change does not work well when the script is sourced from another script
since $2 may be unrelated. This change adds the logic onto the BDIR conditional and
which more external scripts would set, hence avoiding the problem.
(From OE-Core rev: ec8fbe0d1870285a4a972ddcfe83aa63d720cb80)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having bitbake inside the oe-core is annoying to some people. This commit
adds a second option to the oe-init-build-env script.
Run like this:
. ./oe-init-build-env ../build ../bitbake
for example. Without the second option, the old behavior is preserved.
(From OE-Core rev: 45510a0dd7a9321c29c5b21ac4053192f7ab9ad5)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One of the patch backends to linux-yocto is guilt, which normally
tracks patches under .git. But .git isn't something that can be
checked into a SCM and repeated. So it has been moved under meta/patches
and committed to the meta branch.
If devshell is used, GUILT_BASE isn't set, so patch manipulations will
fail. We export GUILT_BASE and point it at the meta directory when
devshell is invoked for linux-yocto.
(From OE-Core rev: 10546e42a0db6a9585488536e29759239ef6e73b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
(From OE-Core rev: 74daad03ca29a03b0005f7d2b90a0347d5b583a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
External distributions based on the oe-core will typically include
bitbake in the top level directory. The idea is to make it easy
for external distributions to easily assemble a distribution
with a pristine version of oe-core, add avoid the git untracked messages:
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# bitbake/
[RP: remove leading slash]
(From OE-Core rev: 9cd30beba77497288eeb2545920bc23f2a77cf16)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libext2fs is located in base_libdir, not libdir
(From OE-Core rev: 683bc278d8695ecf4c8658ab39266279c6bf26d4)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a pathological case, lots of files to process, the sstate_installpkg
performance was very poor. It interated over each file and ran 3
individual sed commands per file. Changing this to keep iterating
but running only a single command took about 1/3 time time.
However, when looking at the corresponding sstate_hardcode_path
function, it was clear we could optimize this further.
Using the same encoding logic to specify only the minimumal sed
operation necessary, and using xargs to avoid the os.system call the
install step was able to be performed in 13% of the original time.
Example timing numbers for perl:
3m7s original code
1m20s single sed, but interating
0m26s using xargs and limited sed
(From OE-Core rev: d9f655753fbdc8cbd8e705577430fed4f23732b3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
because of having "--without-x11" for gdk-pixbuf_2.24.1.bb.
Use the linuxstdbase override and also make it conditional on x11 \
being in DISTRO_FEATURES for passing lsb test.
Split libgdk_pixbuf_xlib to a single package.
(From OE-Core rev: 4cb21630cf87e6cc9a062f1c2be9fea25d3e218a)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
which are created by gdk-pixbuf_2.24.1.bb.
So add this library to core-image-lsb for passing lsb test.
[RP: Fix whitespace]
(From OE-Core rev: e79f19ef4fb59d6dc14ea139d4e4b132add80842)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes bug [YOCTO #2443]
The prototype of findidx() has changed, but the code in xregex.c is
still using the old prototype. This issue stayed hidden because this
code only gets excercised when OPTION_POSIX_REGEXP_GLIBC is disabled
in the eglibc configuration.
See the patch for further information.
(From OE-Core rev: 8691038efb0aca4a2cd61fce0c53d10092e48b75)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 22a2297c712d3b3ca0335197943483218c92ef3e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Empty components in $PATH have the same effect as a . in $PATH,
and are a common side-effect of inserting a misspelled or unset
shell variable in $PATH.
(From OE-Core rev: ac4201b714c83c614113bfa735d0a2fc6f64db99)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Revise the handling from ANGSTROM_BLACKLIST to PNBLACKLIST[pn].
Refactor the code to eliminate references to the distribution and recipe
name in the message.
Change the skipPackage message message from:
ERROR: <recipe> was skipped: <distro> DOES NOT support <recipe> because <reason>
to:
ERROR: <recipe> was skipped: Recipe is blacklisted: <reason>
(From OE-Core rev: 0893457465e184550906844fbab2dec397201835)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was used by old code such as packaged staging but is thankfully
obsolete now and replaced with better mechanisms. Its time to remove it and
the horrible internal only variables associated with it.
(Bitbake rev: 2995b8d551e0532eca20f8862730acd062c608ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was originally used to check the consistency of the stamps in one function
call. This turns out to be inefficient, unnecessary and if it were necessary,
check_stamp_task() could be called in a loop. The function has been unmodified
for a while and likely contains bugs. Its best simply removed.
(Bitbake rev: 728ffde1bd69b880d48fe8523b1616956d13616e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix issues where bitbake would seemingly lock up when checking
certain configurations of stampfiles.
The cache is kept within the runqueue since that feels like the right
place to associate this cache data.
(Bitbake rev: e95755c4931b26d9f8102ed3652dff969145cfc9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- for a normal exit, use WEXITSTATUS, rather than manually shifting
- for exit via signal, set the exit code to 128+N, per shell convention
- if a process was stopped, return and don't handle it, as the process can yet
be continued
This should fix the case where bitbake says a task failed with an exit code of
0 (we assumed failure based on the overall status, but didn't pass all the
information along to task_fail).
(Bitbake rev: 84ea614bc56d35a414eb5bf5658891b340bfc569)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
as ui design, add number of packages for each group, and make the
text font to 'bold' when row be selected
[YOCTO #2195]
(Bitbake rev: 5812176a679a39a4d096134c871c3d24a7e505ea)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When case about No browser, such as running in 'Build Appliance', user can't open
the hyper link, so add this work around for user. (Checking the browser is avaiable
or not is hard by different system and browser type)
[YOCTO #2340]
(Bitbake rev: 02cc701869bceb2d0e11fe3cf51fb0582cda01b0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the arrow icon refresh so fast as the go backward by illusion, so adjust it slow.
[YOCTO #2335]
(Bitbake rev: ac4a8885fafdc0d1e79831334ead9a8ddb6e2472)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 910452727fc277c1caec7612b36c37b58d845350)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to add MLPREFIX when set RDEPENDS by setVar() function.
(From OE-Core rev: 9407895c88e46490d0ef9bb185f73466e7204c15)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.2.6 is no more fetchable and 1.2.7 fix some bugs, full changelog is
available here : http://zlib.net/ChangeLog.txt
(From OE-Core rev: 2f071e32128d8c022277c8af72dae47f60cf212b)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach
Mark Hatle
Jason Wessel
Christopher Larson
Richard Purdie
Darren Hart
Paul Eggleton
Joshua Lock
Khem Raj
Philip Balister
Bruce Ashfield
Andreas Oberritter
Xiaofeng Yan
Nitin A Kamble
Saul Wold
Liming An
Dongxiao Xu
Ting Liu
Eric Bénard