A link was going to an old YP page that talked about patch
style guide stuff. That page simply redirects the user to a
styleguide of the OE. I fixed the link in the manual to go
directly to that page now.
(From yocto-docs rev: 913c30eae42e89cc6f8dd99026594c2843985c58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak a number of doc lines so that the KERNEL_FEATURES variable
refers directory to .scc files, and does not take advantage of
potentially confusing shortcuts.
(From yocto-docs rev: 6236fb098fc2d518f6f4f63e16b19a06a775d2d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Version 1.8 drops support of the 3.10 and 3.17 kernels. The
emenlow example was using the 3.10 kernel recipe as a showcase
and it also listed the recipe in the directory structure. I
removed it. Additionally, the yocto-bsp create command was
prompting for the user to accept the default 3.17 kernel. I changed
that to 3.19.
(From yocto-docs rev: 03bf66e961400b27b7e31d4a25776a11ce5719fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This note provides a bit of a warning or tip regarding naming
BSP layers. The letter of the law dictates that you don't
need to prepend a BSP layer name with the string "meta-".
However, scripts exist in OE where the naming convention is
assumed.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0375349fdd3cd5ff8a54db8124d5cdc02133ff12)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Crown Bay is short on life so I swapped it out for the eMenlow.
(From yocto-docs rev: 6d5394c12a374463cb1d5215af88178b63a5b8c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-bsp and yocto-kernel tool output for the examples
were updated to be current.
(From yocto-docs rev: a05b1df35c7518027b1eb73f9ea2b6a3d00dca43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the explanation for adding the BSP-specific files did
not take into account for layers that might support multiple
machines versus a layer not supporting multiple machines. I added
more explanation that covers both scenarios to be clear.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3f00f0bb830665f8711c68aa6110b8399e867345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Crown Bay BSP now only supports VESA graphics. Because of
this, some of the examples in several areas of the BSP hierarchy
were wrong. Changed accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b61f013a086a9135a86eedf2884fd1b07f798165)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the choices and version numbers of the "yocto-bsp" section
of the BSP guide to match the current development utilities.
(From yocto-docs rev: 0f8472ffa2bc3ae762587c4e2345a4d9850608ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory structure no longer seems to support two flavors
of the BSP: one with EMGD and the "noemgd." Only the "noemgd"
remains. I have updated some of the examples here to reflect
the current directory structure and sample configuration code
for the BSP.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64fc4a7a6d69eb99dcd3d8c5e388810e7052ad75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example that creates a new BSP layer by using the yocto-bsp
script, the final step 6 could be interpreted as the script
creating the new layer in "poky". Even though the sentence is
technically correct, sloppy reading could mis-interpret it. I updated
the sentence so that nobody will be confused.
(From yocto-docs rev: 7c2bed2aa6f8c189ed9cabff6e4d4d9557238702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added several cross-link references for the LICENSE_FLAGS and
LICENSE_FLAGS_WHITELIST variables. Note that the cross-references
previously put in for LICENSE_FLAGS were slightly wrong as they
were using the <ulink> tag instead of the <link> tag.
(From yocto-docs rev: dc2769c63d24d3650c993cfd48bcb4540ad36ca2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add several links to the newly described
LICENSE_FLAGS variable in the glossary. Three links added to the
ref-manual and a single link added to the BSP Guide.
(From yocto-docs rev: 2ca6e556c299814d6ef847ed059a4f0a2d48adb3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I extended the section to mention where to find YP supported
BSP layers and a bit on how to get them via the link from the
Source Repositories web interface. Changes driven by community
input.
(From yocto-docs rev: 4c944bf33b7d642126c52efd313666270145ab50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ran the tool and provided the actual machine branch output
choices.
(From yocto-docs rev: 5b78e70079e2c621221187d4419de2a2427efbc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example does not run as described. It said that the
setup script was run and the user would be in the top-level
Source Directory (e.g. poky). The script errors out unless
run from the poky/build directory. So I took out the requirement
of being in the top directory.
(From yocto-docs rev: 800e4001319cde3e665c0271fd5a19646fb2bd7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was using an out-dated version of the
linux-yocto_3.10.bbappend file. The new version accounts for
both emgd and non-emgd configurations. I had to insert the new
listing and update some supporting text describing it.
(From yocto-docs rev: 97329a154e3dee44cb393d4a289fdcbb9f8adf07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "require" statements changed from four to three.
(From yocto-docs rev: 36f4fe004e69cb7715d41787d4c22b39371f63b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipes-kernel structure had changed for the Crown Bay
BSP.
(From yocto-docs rev: 14ecfc7e676901a6d422f49b0170f27f6b46837f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Several areas affected by the reference BSP "beagleboard"
being replaced by "beaglebone".
(From yocto-docs rev: 2f02b570e1ebcf0469871b67a029b65fa8b285f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did not eliminate this variable but rather changed the description
to indicate that it has been deprecated and that the user should now
use a PR Service to do this stuff. There were several areas in the
YP manual set that used the variable in code. I just deleted those
lines from the code.
(From yocto-docs rev: 88a075e6306349e5f8c0d53b5288ef1e64956cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure that the first occurrence of each "BitBake" term linked
into the "BitBake" term as defined in the dev-manual.
(From yocto-docs rev: 83e6e43d13cf5447b8ef65836d532abbb1f8b15e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistent use of the way directory names were
handled throughout the YP documentation. I have scrubbed the
set and replaced many instances such as the following:
meta/<something> replaces /meta/<something>
poky replaces ~/poky (except in some very specific examples)
I basically got rid of leading slash characters.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae2e451ed8f61484d04b30017021912c4493a441)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YP 1.5 default kernel is 3.10. This is a change from 3.8 in
the previous release. This change affected several areas of
the documentation.
1. The BSP Guide had a crownbay BSP structure that did not
account for the new default.
2. The yocto-bsp tool output still asked for the 3.8 kernel
as the default.
3. The recipes-bsp section had 3.8 used and had some bad
listings that had to be changed.
4. The recipes-graphics section had 3.8 used and also had some
stuff supporting two versions of the graphics (emgd and
noemgd). I had to pull the emgd stuff.
5. There were miscellaneous spots in the dev-manual that were
referencing 3.8 as the default kernel. Particularly the
list that shows what kernel repositories we have. That needed
updating.
(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed this as pointed out by Robert.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 52eb7d8698ef643150ac0ce987677da7a654b3ea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert read through the BSP Guide and noted several issues.
There were several typos, inacurracies for crown bay code,
out-dated kernel usage example, etc.
One change I had to make that was related was to fix two cross-reference
links to a re-named section. These links were the changes in the
FAQ chapter of the ref-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae45df660ebf33105ebf5e60e606b0ec76eb9a6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Release 1.4 requires the user to create an append file to the
new recipe init-ifupdown if they want to create their own
custom /etc/network/interfaces file. Previously, they needed
to append the netbase recipe.
Changes needed in the migration section of the ref-manual as
well as the exmaple used in the bsp-guide.
(From yocto-docs rev: 1903df0c21dbc018f0dbb4ce90eac192b428606b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a bad typo for the CONFIG_YOCTO_TESTMOD
configuration. I had a "K" in front of it making the
command throw an error. Fixed that.
(From yocto-docs rev: 9c25a69abb12fd2fd472a2b9435a30b2c9ac4f2f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This note is at end of the section on the yocto-bsp and
yocto-kernel tools.
(From yocto-docs rev: 91f33e356412b3d305393483770a4257a872e056)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied "Metadata" for "metadata"
Added a link to the section to help find maintainers.
Some re-wording.
(From yocto-docs rev: 7f40c4dac30d2f54cf09afeb51a5cc83ba0851e9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Robert P. J. Day