Without it, we get random hangs on parse failure. With it, some folks have
seen hangs even on successful cases. The former is clearly less problematic.
This is temporary, until I can finish investigating the root causes of both
issues.
(Bitbake rev: db689a99beffea1a285cdfc74a58fe73f1666987)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ought to have been added earlier. (I consulted with Chris Larson on
the notice covering his work.)
(Bitbake rev: 69ed02b645bdc28c1bf24e436beeed37d226b56b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the addition of new cache domains, the summary, license and section
information is no longer requred in the core cache since its only used by
the hob UI. This patch removes the duplicated entries.
It also adds the DESCRIPTION field to the cache for the benefit of hob2.
(Bitbake rev: 33ffb2e99825cb643b148b3462c2d4cf33ff5f58)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To quote my report of this to the git mailing list:
"""
I have a problem with git clone commands using alternates failing by
mixing up different repositories. I have a situation where I could end
up with both:
/srv/mirrors/repo
/srv/mirrors/repo.git
as bare clones.
I then try cloning "repo" with alternates with the command:
$ git clone -s -n /srv/mirrors/repo /tmp/foo
Cloning into /tmp/foo...
done.
$ cat /tmp/foo/.git/objects/info/alternates
/srv/mirrors/repo.git/objects
Note how I'm now referencing repo.git, not repo. This doesn't work as
expected giving some very bizarre results when actually using the
repository.
I appreciate this is a rather bizarre corner case but its one that is
breaking the build system I work with. Ideally people would use a
consistent URL for the same repository but we have an example where they
haven't and this really shouldn't break like this.
Looking at the code, the cause seems to be
clone.c:get_repo_path():
static char *suffix[] = { "/.git", ".git", "" };
since its looking in order for:
repo/.git (fails)
repo.git (suceeds, incorrect)
repo (never looked at)
I'm not sure what would break if that order were to change, swapping the
last two options.
I can "force" the issue by running:
git clone -s -n /srv/mirrors/repo/ /tmp/foo
but this results in the slightly odd looking:
$ cat /tmp/foo/.git/objects/info/alternates
/srv/mirrors/repo//objects
which does at least work.
"""
This patch adds the trailing slash to ensure the correct repository is
referenced at the expense of some ugliness in the alternates file.
(Bitbake rev: d978e7b35550e3785c7c567ffe4c40a3c3947450)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1942]
Ping the PRService only if PRSERV_HOST and PRSERV_PORT are set.
(Bitbake rev: 20f24de0bdafac21f5d8a58701f977efa7041288)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Classes (.bbclass files) can be overlayed in a layer although they are
currently located by BitBake in a different way (via BBPATH instead of
using layer priority) and thus it is useful to be able to see when this
is in effect and which layer's class is actually being used.
(Bitbake rev: f6493e4bad005a82580380d800ebf4c438292f5b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a show-recipes subcommand which lists all available recipes, with
the layer they are provided by. You can optionally filter the output by
recipe name (PN).
(This is a generalised version of the show-overlayed subcommand.)
(Bitbake rev: 05e86ba966f5a26721891c82b21afa48768a67cc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the following improvements to the show-overlayed subcommand:
* Show recipes that are overlayed when the version is higher or lower,
not just when it is the same. This gives a much better picture of the
influence each layer is having over the metadata used for building.
This can be disabled with the -s option if you just want to see
recipes with the same version as before.
* Default to showing name (PN), layer and version rather than the full
path and filename. The old style formatting can be used by specifying
the -f option.
* Mark skipped recipes as such in the output, and print them in the
correct sorted place in the list rather than at the end
* Prefix/suffix title line with === so it can be filtered out easily in
shell scripts if desired
(Bitbake rev: 43b473275d3cb2e60a14e4a52cdc4654b3f4e5e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that using the collection name as specified within
layer.conf (i.e. what gets added to BBFILE_COLLECTIONS) as a name to
refer to the layer is not particularly useful, since layer creators
aren't necessarily setting these to a meaningful value - e.g. OE-Core
uses "normal", meta-oe uses "openembedded-layer", etc. In any case,
BitBake uses the directory name in its list of configured layers in the
system information presented upon starting a build, so let's just do the
same here and avoid confusion.
Also rename the get_append_layer function to get_file_layer since it is
in no way specific to bbappends.
(Bitbake rev: 35d2c1c618826e961dbf4b9889b829f469346d74)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than the slightly awkward underscores, use dashes in subcommands
e.g. show-layers instead of show_layers. (The old underscored forms
continue to be accepted however.)
(Bitbake rev: 6d311ddc1be04ae5bd0a1ebee94b44968e8a3f27)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is being added to resolve setscene race issues where we do have
particular dependencies required between setscene tasks. This allows
specific dependencies to be specified. This allows us to fix the races
in sstate with the useradd class in OE-Core.
Any tasks being depended upon have their reverse dependencies cleared to
ensure we don't have circular references.
(Bitbake rev: e1b157d26374a70e6274edcb4c0b9f3bc48f765c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When constructing the setscene inter-dependencies, we need to account for all task,
not just the last one found. This patch corrects this oversight and ensures all
dependencies are added, not just the first one found.
(Bitbake rev: b9b5b5129d066e1ff7d3effda116afc3c6657beb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is used in all other bitbake parts where sqlite3 is used, don't
know why it wasn't used here, but it fails e.g. on Gentoo
Traceback (most recent call last):
File "bin/bitbake", line 39, in <module>
from bb import cooker
File "lib/bb/cooker.py", line 39, in <module>
import prserv.serv
File "lib/prserv/serv.py", line 4, in <module>
import xmlrpclib,sqlite3
ImportError: No module named sqlite3
(Bitbake rev: 9a57ec705cf5c932d8c2a35852db7a4627c57937)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that custom signature handlers can override specific parts
of the code without having to reimplement whole functions allowing them
more flexibility.
(Bitbake rev: 164195c068a656733cfe7aa07369c5ed6ea62ca5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By calling init_parser which sets up the siggen code after the ConfigParsed
event is fired, we can allow the metadata to add siggen classes which
was always what the code intended.
(Bitbake rev: 69fd5ad4a8402fab5eb8348260966b337c5648ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our checks in the fetcher code assume that if the downloaded
file exists, the download finished successfully; this meant that if
BitBake was interrupted in the middle of a fetch then it would not
resume the fetch the next time, but instead attempt to use the
half-fetched file and usually fail as a result.
Since we're already writing a ".done" stamp file when a fetch completes,
just check for its existence and assume the download didn't complete
successfully if it isn't present.
(Bitbake rev: 721e986624529aedef96dd06c9fe6243f2897b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's unclear from the history but at some point we stopped logging the
"Tasks Summary" NOTE when tasks failed. Reinstate this for failure, and
also make the count of attempted tasks include the failed task.
(Bitbake rev: e44d5be98fc5d2589cd929ce143638395936b936)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The actual task names are discounted for comparison of dependent tasks, only
the actual hashes are used. This updates the comparison code to account for
this change, attempting heuristic matching for more user friendly output but
falling back to showing the changed hashes directly. This avoids some confusing
output to users where it looked like tasks had changed when they had not and
actually had the same hash but a different taskname.
(Bitbake rev: 7da7dff83ed765c9cde1d7f91ee1b65e49520481)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake looks for bbclass now, not oeclass. Update the docs accordingly.
(Bitbake rev: 8b713708541f85a4252c0f7b683aff4407c7d3e0)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids some silent parser hangs we were seeing which were
near impossible to debug as no user feedback was given.
[RP: Tweak commit message]
(Bitbake rev: d104f29871c04a5a36600a35b2568b49e5b21ca0)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1761]
Reconnect to the backend Sqlite DB in 'database is locked' exception so
the timeout can be leveraged in each time retry.
(Bitbake rev: b310382764367b573c84f33d847c6eb821266f9e)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the error logged within cooker summarising the list of failed
tasks, and instead print this in the UI (knotty) where it belongs. This
also adds the actual name of the task that failed as well as the
corresponding recipe file that was being shown previously.
In addition, reformat the summary messages more tidily - no extra breaks
between lines and use correct English singular/plurals, with some
allowance for future translation.
(Bitbake rev: cdf69913f99d28bc7f51067a60257701f952c6cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improves error output for matching problems when the -b / --buildfile
command line option is used.
Rename MultipleMatches exception to NoSpecificMatch (as it is also
raised when there are no matching recipes) and make it inherit from
BBHandledException so that it doesn't print a stack trace (we always log
an ERROR prior to raising it.)
In addition, improve the formatting of the error message - only call the
log function once rather than once for every match, and use a more
appropriate message if there are no matches.
Fixes [YOCTO #1141]
(Bitbake rev: 803550a5098ec878164245e71344c3d687310b72)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the warning for the initial fetch failure a single line - we don't
need the full command and output here yet, but write it into the log in
full as a debug message. However, if fetching from mirrors fails as well
then print out the full details for the first error that occurred as an
ERROR rather than a WARNING.
Since this is logged as an ERROR, combined with an earlier patch it
suppresses the full log which does make the output much more readable
for any fetch error.
Fixes [YOCTO #1832].
(Bitbake rev: 6bbdc7d259c0cc041b62dbdb26cfc3ec6edcb6f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a task has logged an ERROR then don't print the contents of the
task's log file in knotty (the default terminal UI).
As a side-effect we now also respect BBINCLUDELOGS in knotty; if it is
false we never print the log (but the pointer to the log file is always
printed).
(Bitbake rev: b9746b7e4d7aa5c34eba15a61427bfc6949af123)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The termination signal and exit code of the fetch process were not being
decoded correctly, resulting in bitbake reporting that the process
terminated with a signal of the exit code (if it was under 255). There
are functions in the Python os module to do this decoding correctly (for
Unix at least), so let's use them.
(Bitbake rev: 50aea9a76e40cf71cc3f1462c88298e4846a031c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Seeing the word "failed" alone without reading the whole context has
occasionally triggered an automatic assumption on the part of some users
(myself included) that something has gone wrong, even when this message
is telling you that "0 [tasks] failed". To avoid this let's just say
"all succeeded" in this case instead.
As a bonus this means you can now search the output for "fail" and not
find anything if all went well.
(Bitbake rev: b6f067af12d4661758a78788f1db472684b9aba8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The "name" argument to FuncFailed is rarely used as a name in actual
usage within bitbake, so don't treat it as one in the output.
* Don't print URL for FetchError if it was not specified (i.e. don't
output "Fetcher failure for URL 'None'")
* Don't include URL in "unable to fetch from any source" message since
we supply it to FetchError and it will be printed anyway.
* Don't include URL in "checksum failed" message for the same reason
(Bitbake rev: 86811bd85e2e453ee92a05fe60160d9b49ac69e8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The count of warnings being shown in the summary at the end was also
including the number of errors.
(Bitbake rev: d242d6ca81dd83b2b13a3ac77ac4cd829a69cf83)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1126]
A local PR service will be started and stopped automatically along
with the bitbake invocation/ternimation.
This local PR service will be started only and if only when the
PRSERV_HOST is set to 'localhost' and PRSERV_PORT is set to '0'.
When started, the sqlite3 database is stored at
"${PERSISTEN_DIR}/prserv.sqlite3" or "${CACHE}/prserv.sqlite3".
(Bitbake rev: 9d8f45407c67ed0d3c4f820cf646de3c385067c7)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1556]
1. Added the package_arch into the index to the DB table. Because the
change in PACKAGE_ARCH will results in different checksum, and it is
better to have seperate PR value domains for differnt PACKAGE_ARCH of
the same pakcage.
2. Changed the PR service to operate in no history mode. In this mode,
the for a given query tuple (version, pkgarch, checksum), the returned
value will be the largest among all the values of the same (version,
pkgarch). This means the PR value returned can NOT be decremented.
3. Added export function. For each (version, pkgarch) tuple, only the
record with the maximum value will be exported.
4. Added import function. The record will only be imported if the
imported value is larger than the value stored in the DB with the same
(version, pkgarch, checksum) tuple.
(Bitbake rev: 379567ee879dcdc09a51f7f1212bde1076147a6f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a problem knowing when to show the user debug information and
when not to since the code has already shown the user suitable information
about why a failure is occurring.
This patch adds a bb.BBHandledException exception class which can be used
to identify those exceptions which don't need further explanation to
the user.
This patch uses this class for the bb.providers exceptions and ensures the
command handling code correctly filters the exceptions meaning that
"bitbake invalid"
now shows an simple error message and not a python traceback.
[YOCTO #1141 partial]
(Bitbake rev: eac9249b40ae1e3aa21e016010c862664e59a8d4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Show a summary count of warning/errors messages shown to the user during the
build and make it clear when an error exit code is being set.
[YOCTO #1540]
(Bitbake rev: 9943bad611a974e4d37a00c7a4de1752250370c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's recommended practice to close files when finished with them and the
code in this function was not doing this.
(Bitbake rev: 470a160813ce6cf04f83258d46ded5c2ab8bc520)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you flatten layers that have different directory structures you may
not end up with a usable layer in the output directory - some files
won't be picked up by BitBake.
To try to avoid this problem, once flattening has completed, get the
BBFILES entries that correspond to the layer from which the output
layer's conf/layer.conf came from, and check through all of the
.bb/.bbappend files in the output directory to see if any will not be
referred to by BBFILES in the output layer. If any are found, show a
warning to the user.
(Bitbake rev: 8e4dc97614f2022855143b49d18795ca0352b237)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You can now optionally specify two or more layers to flatten into the
output, rather than flattening all of the layers in the current
configuration (but this is still the default behaviour if no layers are
specified). Note that this means the output layer may still contain
bbappends where the corresponding recipes are not present in the list of
layers to flatten. There is also a caveat when a layer not being
flattened would be "inbetween" the flattened layers (see the command
help for details.)
Implements feature request in [YOCTO #1564].
(Bitbake rev: 379b12107ec921b4458eda320078374a509164c1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parseConfigurationFiles API calls the related function in
cooker.py to parse config files.
(Bitbake rev: 96c307b9874131ad8c7d9caea6f6dfbd09aab9d4)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a new option "--server-only" for bitbake command, which allows
bitbake runs as a server, and let frontend connect the server itself.
"--server-only" should work with "-t xmlrpc", or bitbake will exit.
bitbake --server-only -t xmlrpc will print out the server address and
port information.
(Bitbake rev: 2677254cf9792cee083605267570d93b425cc2db)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no direct use of command in cooker.py, and it is using
bb.command instead. Remove command in the import list.
This fixes a problem of embedded import between command.py and
cooker.py.
(Bitbake rev: c353316b2efcc7a893d6b4aa9a9647d51a6f69e3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no direct use of command in cooker.py, and it is using
bb.command instead. Remove command in the import list.
This fixes a problem of embedded import between command.py and
cooker.py.
(Bitbake rev: 92fec2788e33d301cc63848901bc6adc764a2ecf)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass host and port to BitbakeServerInfo class instead of the "server"
instance. With this change, GUI can connect with server individually
by host address and port.
(Bitbake rev: 5124351d6c287185723c98e6e4400c5402a5c8a8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initCooker is to set the cooker to the initial state with nothing
parsed.
(Bitbake rev: 8ee9c6cc47938604268242d90bd3007218f9a36e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For buildTargets function, we use bb.configuration.data as parameter
to inject events, since in hob environment, some variables are
modified dynamically and bb.configuration.event_data may out of date.
(Bitbake rev: 487a124942fd5cd9de71413b79a4049a6d26f1e8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for findConfigFiels() and findFilesMatchingInDir() functions, they
don't need to parse all the bb files, thus setting the needcache
value to be False.
(Bitbake rev: 3ef73dee8b08ccfd15a4901cce315a99b22e71d7)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When debugging setscene problems it was found that some extra debug messages were useful.
This patch adds them.
(Bitbake rev: cff2c258b77fde01d530a5923e553e6111b15eb5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Christopher Larson
Richard Purdie
Paul Eggleton
Shane Wang
Christopher Larson
Lianhao Lu
Martin Jansa
Darren Hart
Dongxiao Xu