Now that the tune for qemux86-64 changed to core2-64 we need to
tell the emulator to use a proper CPU model. With the default setting
of qemu64 we'll get things like:
root@qemux86-64:~# smart --help
traps: python[758] trap invalid opcode ip:7f2af01f6be7 sp:7fff49466ef0 error:0 in strop.so[7f2af01f5000+6000]
Illegal instruction
If the tune for qemux86 changes, that needs to be updated too.
(From OE-Core rev: e6ade33a6f52434e884dd97549b8ac731347d9ad)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default slirp address for the NFS server is 10.0.2.2. If not
using a tap interface this address must be used or the target system
cannot connect properly. Also the ip=... kernel arguments need to be
set to dhcp when using slirp or the root NFS will not get setup
properly.
The call to cleanup() results in a routine which is not defined when
setting up the NFS because it is called before acquire() for the
locking of the tap interfaces, the solution being to simply not call
cleanup() that early.
When using slirp, kvm should not execute the vhost net checks because
the vhost net will not be configure or used.
(From OE-Core rev: 1ea04d87525f26c2cd32ba29c0f14c6226f60729)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The unfs3 no longer has an rpc.mountd component. There is just a
single server for mountd and nfsd requests. This means changing
the name of the server in the scripts that check for it.
[YOCTO #5639]
(From OE-Core rev: ea126a7d4a63e27755046ddd2eb0be079e20c334)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new version correctly handles the 64bit ext3 / ext4 issues we
were seeing with the older unfs-server which did not handle 64bit file
systems correctly, producing the duplicate cookies.
[YOCTO #5639]
(From OE-Core rev: 2a59d55f712bbd79b1edf3ccb90ccabf609c9f0d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the x86_64 architecture bsp creator to include choices for core2
and corei7 tune files.
(From meta-yocto rev: 06a16db32eae5b2280642643009fa653dc6f7839)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the substrates to use x86-base instead of ia32-base and core2-64
instead of x86-64. Update the core2 bit to include the DEFAULTTUNE to be
explicit.
(From meta-yocto rev: 3ccc079192ca147382231f0379bae1d04d47a89c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When --full-time (or -T) is used, the graph allways shows the full
time regardless of which processes are currently shown. This is
especially useful in combinationm with the -s flag when outputting to
multiple files.
(From OE-Core rev: c6e88199ddf2c4ae243d42afc403d28ab56f00f0)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add minimum width zero-padding to the index used in split output files
with -s and -o. I.e., if -s 200 is used, then the index will be
zero-padded to three digits width.
(From OE-Core rev: 45565b24651ab502ae49dc49261dc3ad5634191f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print the directories that will be deleted, and add a rudimentary check for
arguments and display a message if arguments were passed.
[ YOCTO #5423 ]
(From OE-Core rev: e46b00a6810eaed27a24495cacb19e565de59fec)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the following error messages when no dependency
issue detected:
find: `/build/r_cgp-dep_1225/p_x86_1225/bitbake_build/tmp/work/': No such file or directory
grep: test-dependencies/1388042399/3_min/failed/*: No such file or directory
ls: cannot access test-dependencies/1388042399/3_min/failed/*: No such file or directory
(From OE-Core rev: 2492bec586d407b1a89491aed7e81e80af997248)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qemu BSPs were picking up the wrong interfaces file, resulting in
some erratic interface behavior seen with qemu-based BSPs - this fixes
the problem.
[YOCTO #5636]
(From meta-yocto rev: bbc3d56d6ec28b4cd92874fe4f98e1cd499415be)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment, the user cannot to set -vga other then vmware
(because "vmware" is set by default); and the first argument
in qemuparams has higher precedence.
(From OE-Core rev: 54a43397c48c974570e3eade55163eb766994a55)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A simple script I put together for getting the paths from one node to
another in a dot graph. This is useful for example in working out why
a particular recipe is getting built in conjunction with dot graph files
produced by bitbake -g.
For example:
$ bitbake -g core-image-minimal
...
$ graph-tool find-paths pn-depends.dot core-image-minimal util-linux
core-image-minimal -> packagegroup-core-boot -> udev -> glib-2.0 -> python-dbus -> dbus-glib -> dbus -> libsm -> e2fsprogs -> util-linux
core-image-minimal -> packagegroup-core-boot -> udev -> glib-2.0 -> python-dbus -> dbus -> libsm -> e2fsprogs -> util-linux
core-image-minimal -> packagegroup-core-boot -> udev -> util-linux
Partially addresses [YOCTO #3362].
(From OE-Core rev: 0b76f034dd0320ec545229872be8095c44ddee73)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using a whitelist for image names to default to when none are
specified on the command line is no longer desired. Instead,
choose the most recently created image filename that conforms
to typical image naming conventions.
Fixes [YOCTO #5617].
(From OE-Core rev: 9f69e00200cdbd5ba2e46a54f33c29797816e43f)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After installing python-unittest, the following errors occur when executing
"import unittest" from a python commandline:
ImportError: No module named StringIO
ImportError: No module named pprint
ImportError: No module named difflib
ImportError: No module named pprint
ImportError: No module named fnmatch
Fix this by adding the missing dependencies to the generator script and run
the generator.
(From OE-Core rev: 496adfe84ef05d031444988d41451a018133f5a8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script should clean-up all the .inc files that might
have been created by tests regardless of the outcome or if
the script is interrupted. (currently the
last test will leave a conf/selftest.inc around, even
if it's not included anywhere)
Also fix delete_recipeinc to actually delete what's supposed to.
(From OE-Core rev: 6008745c56800e0f5f01a756be0701cebd9de4ae)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest,
which are tests against bitbake tools.
Right now the script it's useful for simple tests like:
- "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc)
- or "bitbake-layers <...>" type scripts and yocto-bsp tools.
This commit also adds some helper modules that the tests will use and a base class.
Also, most of the tests will have a dependency on a meta-selftest layer
which contains specially modified recipes/bbappends/include files for the purpose of the tests.
The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc
(which is added as an include in local.conf at the start and removed at the end)
It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf
and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal
was built before.
[ YOCTO #4740 ]
(From OE-Core rev: 41a4f8fb005328d3a631a9036ceb6dcf75754410)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were using "du -sk" to collect the total size of all files in each
package for writing out to PKGSIZE in each pkgdata file; however this
reports the total space used on disk not the total size of all files,
which means it is dependent on the block size and filesystem being used
for TMPDIR on the build host. Instead, take the total of the size
reported by lstat() for each packaged file, which we are already
collecting for FILES_INFO in any case.
Note: this changes PKGSIZE to be reported in bytes instead of kilobytes
since this is what lstat reports, but this is really what we should be
storing anyway so that we have the precision if we need it.
Fixes [YOCTO #5334]
(From OE-Core rev: 29615b36fca696822a715ece2afbe0bf9a43ed61)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FILES_INFO entry in each pkgdata file stores the list of files for
each package. Make the following improvements to how this is stored:
* Store paths as they would be seen on the target rather than
erroneously including the full path to PKGDEST (which is specific to
the build host the package was built on)
* For simplicity when loading the data, store complete paths for each
entry instead of trying to break off the first part and use it as the
dict key
* Record sizes for each file (as needed by Toaster)
* Serialise the value explicitly using json rather than just passing it
through str().
Fixes [YOCTO #5443].
(From OE-Core rev: ca86603607a69a17cc5540d69de0e242b33382d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Write a list of installed packages to a .manifest file next to the
image, so we can find out what went into the image after it has been
constructed without necessarily having to have buildhistory enabled
(although that will provide more detail.) We can make use of this for
example in the testimage class associated code that checks for installed
packages for determining whether or not to run specific tests.
Note: this replaces the previous ipk-specific manifest code with
something that works for ipk, rpm and deb, and instead of a pruned
status file, packages are listed one per line, in the following format:
<packagename> <packagearch> <version>
Tests for all three backends have shown that the performance impact of
this change is negligible (about 1.5s max).
Implements [YOCTO #5410]
(From OE-Core rev: 2978d1f2617a33e2e3a77e249d73e998d79b4ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the build environment is misconfigured (e.g. a bad path
for a layer in bblayers.conf) the yocto-bsp script crashes with a
standard python error, not very explicit. This fixes the problem.
Signed-off-by: Bastien JAUNY <bastien.jauny@gmail.com>
(From meta-yocto rev: 4a8e80b812eebdc1c9570b5d88aa0f3b34824b68)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously they were transparent.
(From OE-Core rev: 4ebdd8672cc5589a3e2f8d1b75cde7fae9fd6c99)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While "Show more" is enabled, all processes are shown, regardless of
--mintime.
This also has the added benefit of making the first shown bar start at
its correct offset from the start time, rather than always starting at
0.
(From OE-Core rev: 5f1b8730f90099c0f73a6b08599990ee71e831b5)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this, one second ticks are only enabled if the width of a second is
five pixels or more. It is also possible to distinguish 1, 5 and 30
second ticks.
(From OE-Core rev: bd0bde6d04fd6cd9f8e7773d68da127144afa7de)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will make the first bar actually start within the graph. It will
also move the graph to the right so the names of the first tasks are
more likely to be visible.
(From OE-Core rev: 388daa9a8ce7f2216fb55ce65cab1d4060f6c41d)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update the pybootchartgui code to the latest release from its new
location at "https://github.com/mmeeks/bootchart". This only imports
the relevant parts, and not all of bootchart2.
(From OE-Core rev: 6f1568e54a7808b2ab568618fc5bb244249579f1)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If --help is specified as the first argument, show the standard help
text instead of trying to process it as a URL.
(From OE-Core rev: abb139b10c3f431bcebb1847621f97d7ec6249ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This seems to be an obsolete check - we don't have any problems with
image creation under selinux, so remove it.
(From OE-Core rev: 12e81eceab9e0a483765566ad3791b14718195b5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This global variable is no longer present, so pass in the value
specified via the command line.
(From OE-Core rev: fa90f92e52330a9bf5836c0832412af0927b19a9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5388]
These scripts can be useful when working to reduce the size of the Linux
kernel and the root filesystem.
ksize.py displays the kernel build size by the built-in.o files.
dirsize.py displays the various sizes of the components of the root
directory.
(From OE-Core rev: 26099eb8ac855aa08e5e1a307affe42fe5f43859)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a "lookup-recipe" command to show which recipe produced a particular
package.
(From OE-Core rev: 4ab561ac3df105b4b6487271b6ccc29445518d52)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a "lookup-pkg" command to oe-pkgdata-util that can be used to find
the runtime name of a package (after e.g. Debian library package
renaming).
(From OE-Core rev: d923846d91ae307372f1e48483e86807feeeb09d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ability to search for a target path in produced packages, in order
to find which package provides a specific file.
(From OE-Core rev: 0824f2f5cf4e05f82b6986ce6fb22fa1392b7776)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Show an error if the specified paths don't exist.
(From OE-Core rev: eff2690f7976664e6257c1c19c89feea9152eb9e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use optparse to parse command line
* Make help text actually helpful by describing what each command does
* Drop comment at the top listing the commands which is now superfluous
(From OE-Core rev: feb317513fff638ad7abdba8ab34b8413f0ab055)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379 removed the
vendor-os argument from the command line, and the code using the package
architectures, so clean these items up.
(From OE-Core rev: 8b9ee57afbbcf633cba66e4b6e8ab7339ad6d391)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 2.4 does not support the 'b' string literal or the
keyword 'as' in exception handling. Python 3 does not accept
the old method of exception handling and defaults to unicode.
The b() function converts strings to bytes on Python 3 and
using sys.exc_info() avoids the exception handling syntax.
(From OE-Core rev: 1e2ec5f576f167673d7980737826987fefdc74a9)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar
Saul Wold
Jason Wessel
Darren Hart
Peter Kjellerstedt
Ross Burton
Jackie Huang
Tom Zanussi
Valentin Popa
Paul Eggleton
Scott Garman
Mike Looijmans
Bastien JAUNY
Peter Kjellerstedt
Tom Zanussi
Konrad Scherer