This figure provides a conceptual look at the repos and file structures
needed to run the example. Or, for that matter, to get set up to
modify the kernel.
(From yocto-docs rev: d469449f1d416a6a96bdde297daae68a9f3094e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed a major re-write of this section that touched all
aspects of it. This was necessary due to the fact I could not get
the example running because of not understanding the repo location
and branch needs to set it up.
(From yocto-docs rev: 160e66d0c8ddf11584c53306def916a45a05f62b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I separated the section that explains how to set up the poky-extras
git repository. This used to be in the kernel area right after
creating the bare clone and the copy of the bare clone. I thought
it would be better as a stand-alone bulleted item.
(From yocto-docs rev: 4ea917c7218f238e2b0d2bb377a97f4b1f5eb1f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
still working on the kernel example.
(From yocto-docs rev: 90c8cb778d3c146f24626a681f05b88bab1e9766)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section for the example that ensures the image for qemu
is available.
(From yocto-docs rev: a3ca52cb7088ec85502b507093082f35f23befd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed an anchor point in the Index of Downloads bulleted item for
reference from other documents.
(From yocto-docs rev: 7d4f96d20667fbf5f52e25840b39f1994b1c4cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tightened up the section that talks about setting up the environment
and starting qemu. I just added a little more clarification on the
kernel-image variable.
(From yocto-docs rev: 54c037d45ca46c09544dae67793237c76a1205f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the downloading the filesystem section to have an inclusive list
of image profiles and a reference to more information on that. Also
included more explanation of the two types of image tarballs.
(From yocto-docs rev: 14965cbedd719beb6191771c6dcb92742f4229bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some edits to the section that shows how to download a pre-built
qemu image.
(From yocto-docs rev: 89127522b09cc201008dc760f8b1397b5ff36e42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the 'i686' stuff to 'i586' after seeing that it is named that
in the actual index of downloads area. I also tightened up the example
a bit.
(From yocto-docs rev: ab76e8f8aa3d8d24d1fd8ff3b7f8f175b8b8f663)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various things going on in the kernel example. Far from complete.
(From yocto-docs rev: 0c0548b79589a606f91bdb39e5a2ece71f4c108e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that describes how to get the local Yocto Project files
I was referencing the general section. I have added a more specific link
to the bulleted item that describes how to get these files.
(From yocto-docs rev: 2b03c4d39a83d731581a6cd63a5c9e5c7e4cb57b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of images has grown. I added all images reported in the
1.1_M2 build using the 'ls meta*/recipes*/images/*.bb' command.
(From yocto-docs rev: 62e12a71c73a5e3a20c6887d754a96eb9e754b48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New flow suggested by Dave Stewart.
(From yocto-docs rev: 101a464f0f17f3816bfb32f6e3a5da714cc32a06)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the introduction paragraph to cast the chapter more for YP than
just generic newbie information. Also, added three screenshots for
the source areas at Dave Stewart's suggestion.
(From yocto-docs rev: 26d3c58ff6295515c593c8b0b12dc3d6952b752a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Character does not display in PDF version.
(From yocto-docs rev: 8f9b114190257cfe5425f6e322dcfb6f03941bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 696aa5b822cd0e52a9c67c0b3ea73f35f6e99983)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 5061f9e8b3cfb66b2ed17befc9c4c4d8b875f4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 92eb8221bdaee94b3d5861b929ef1adb986cc865)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1b729667498363a5bb451502975b0797796eea0b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 29426ab131a319b764f82da8a11cb4d9b590c3b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the note about manual differences in the legalnotice area.
this produced a better looking note.
(From yocto-docs rev: 8d44a5fba7c52d5798758467e93c9c64e48d512a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1675c31aa02a4daed356af4ea9c78d493a9a2597)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the BSP flow illustration.
(From yocto-docs rev: 82ec8528c058d702402767ffa471695eb82e259c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need for this chapter any longer. Re-org has ash-canned it.
(From yocto-docs rev: 085a514133f4326c1da372b95507a3665e8f91ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the cases chapter and added an appendix for kernel example.
(From yocto-docs rev: 60c8ec3444c08e94468ff349b676652c7f6ff0cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the Docbook tags to make this an appendix.
(From yocto-docs rev: fd5658872a9d48a2ee8f0229cb0fca90961aee32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark