Add the missing files to the base -dbg package, remove the libPN-dbg as it is
non-standard.
(From OE-Core rev: f736d197150fdf6520402ba33e55214527455833)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not only do we have to override things on the make line, but we
need to hack on configure as well to avoid certain behavior.
(From OE-Core rev: 97a6bf1787995f15c8033bd26bdbe50c7efbbcfd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to avoid applying a patch in configure, because a rebuild could
trigger this, without triggering do_patch.
(From OE-Core rev: 16fbdaa24fd4add37c1e873505f55bcef5695a94)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mv of aclocal.m4 can only occur once, or it will fail. On a re-run of
configure this will fail.
(From OE-Core rev: 1e232db4f6e90577f75efabd279b6980277b9547)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to perform those actions after patch, and before configure.
Otherwise a rebuild starting with configure will fail.
(From OE-Core rev: 2499777a7f16e98e1e34ea22d2e6a3409e35915b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of sync'ing the in-tree beagleboard support, the
following commit has been pushed to all branches, and hence
the SRCREV update:
bb8e31f USB: ehci: remove structure packing from ehci_def
The meta SRCREV update is to capture the new and sync'd BSP configuration.
(From OE-Core rev: f9b77564cc7f62ea0bc4b4320036f2d6d5c90e27)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV for the kernel repo's meta branch to capture
the following commits:
94fa015 meta: add taskstats experimental feature group
4fb2ed5 meta: enable freezer support
88d619e meta: enable fuse and cuse as modules
f465827 meta: add namespaces + experimental configs
fbdd376 meta: add devtmpfs config group
b04f6d9 meta: re-enable cgroups options in the standard kernel
There's also a change to the recipe itself to trigger the taskstats
optional config items by default. This is to allow the introduction
of these changes gradually, since other recipes inheriting the kernel
can add or ignore these options at their convenience.
(From OE-Core rev: 91ddf0ad3a120bbfb5a24bd853d4d195291faa95)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to account for the merge of utrace to support
systemtap.
(From OE-Core rev: ac12cbf31433743e5966d1d2013e010f0c548c43)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Qt #17962] -- http://bugreports.qt.nokia.com/browse/QTBUG-17962
[YOCTO #1168] -- http://bugzilla.pokylinux.org/show_bug.cgi?id=1168
Fix "invalid conversion from 'const void*' to 'void*'" error compiling
src/dbus/qdbusintegrator.cpp. It is assumed that the use of "const" here
is incorrect as no other usage of Q_GLOBAL_STATIC_WITH_ARGS uses const
prefix on the first (TYPE) argument.
Patch was imported from the Qt bug tracker (see above reference); the
patch was rejected but for procedural rather than validity reasons.
Fixes [YOCTO #1168]
(From OE-Core rev: 17d5422460bf9074223475b15d128171d12b170a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Freetype support is disabled so there's no need to point to the freetype
headers.
Prompted by OE commit 4931b37c8faf1eef7322cc82bf979885c770f4e0 from
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
(From OE-Core rev: bc5647504268ec4ef8a20dd1a6f9bdf7e6849ba7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FILESPATHPKG was being used to in order to bring in linux.conf and
g++.conf in this recipe, however this probably never worked since
FILESPATHPKG always has the MACHINE appended to it and these are not
machine-specific files. The only reason it built was that these two files
could be found within the "files" subdir until we removed Qt 4.6.3.
Using FILESEXTRAPATHS (as qt4-tools-native does) solves this.
(From OE-Core rev: 49102f3728425cacfaeb384491b9355bfa2a4230)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to "tools-profile" and "tools-testapps" were removed from variable \
"EXTRA_IMAGE_FEATURES" in meta-yocto/conf/local.conf.sample, some libraries \
needed by LSB Test Suite were absent in an lsb image. I add these absent \
libraries to task-core-lsb.bb.
(From OE-Core rev: 9fbef8144c5640b64b4485449f3ff697e95b5bfe)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2.14 has a new utility which can trace through PLTs of shared libraries
We package the library separately and the script is already packaged in
eglibc-utils so we create a RDEPEND so that the library is pulled in
if someone isntalls eglibc-utils
(From OE-Core rev: b8c7249e10a7bba329f1977529c7bde6b969f729)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ${PN} also means that uclibc-initial gets to provide it
which we do not want
(From OE-Core rev: cec81f8d2e50a50d8728fdda150b9bcfbc4e4aee)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by systemd
(From OE-Core rev: 08ad271248cc2c7cd9cfbe683d2335337f5ebb8b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove unnecessary dependency via configure option and make oprofileui use GIO
(From OE-Core rev: ad5481f6348d1bc504729efd4321bf1fcac4083b)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the rules and scripts associated with alsactl in the alsactl subpackage
(From OE-Core rev: 0b0a46483f151118c76acf2d60f117b10d4aa343)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
NOTE: package gnome-keyring-2.32.1-r1: task do_package: Started
WARNING: the following files were installed but not shipped in any package:
WARNING: /usr/share/gcr/ui/gcr-import-dialog.ui
WARNING: /usr/share/gcr/ui/gcr-certificate-basics-widget.ui
WARNING: /usr/share/gcr/ui/gcr-unlock-options-widget.ui
WARNING: /usr/lib/security/pam_gnome_keyring.so
(From OE-Core rev: 6e272b2013d08803e8a4bc33d794a8a58c5c3e4f)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we use a tag here then bitbake has to connect to the repository to find
out the corresponding revision (so it can expand SRCPV which is part of PV,
which amongst other things is needed to determine whether or not the
package has to be rebuilt.) This occurs at parse time; on machines behind a
firewall or with no network access this can be a problem.
We wish to avoid unnecessary network accesses and network access in our
default configuration during parse time is even worse. Substituting the
git revision corresponding to the tag prevents bitbake from having to
contact the remote repository in order to expand PV.
Addresses [YOCTO #1186]
(From OE-Core rev: 04fe616bec7416b5aea55dad6896700652796239)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemtap only supports x86, x86-64 and powerpc at this point.
v2: updated to reflect comments from Koen Kooi and Phil Blundell to use
COMPATIBLE_HOST instead.
(From OE-Core rev: 835d817f1ba7b99167743fdb86ba80f3a07bd82d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes do_install() on micro, which otherwise fails for obvious reasons.
(From OE-Core rev: 2947f40510a8756895ec4edda2d07c1f915baa45)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to fix a bad commit which resulted in the
tree being dirty after checkpoint, and hence a failure during the
patch phase. The meta commits never modify code outside the 'meta'
directory tree, a rule that was broken with this bad commit.
Without this fix, you may see an error like:
| [INFO] doing kernel configme
| [INFO] Finding user(s) of branch "yocto/standard/fsl-mpc8315e-rdb"
| [INFO] Branch meta-temp used by fsl-mpc8315e-rdb-standard.scc
| [INFO] collecting configs in ./meta/meta-series
| [INFO] checking out yocto/standard/fsl-mpc8315e-rdb
| error: Your local changes to the following files would be overwritten by checkout:
| arch/powerpc/boot/dts/mpc8315erdb.dts
| Please, commit your changes or stash them before you can switch branches.
| Aborting
| [ERROR] Checkout of yocto/standard/fsl-mpc8315e-rdb failed
| Error running the meta series for collecting config data
| config of meta-temp (fsl-mpc8315e-rdb-standard.scc) failed
(From OE-Core rev: 09e7b0535f8f2f287da670aabd1d6db76b90686f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for using SOC_FAMILY in the COMPATIBLE_MACHINES
setting for a recipe.
* This will allow recipes to work for entire families of
devices without having to maintain/update the compatible
devices as new devices are added into a family
Based on 07076390358f211bd96779bec2d6eb5eaa0ad699 by Chase Maupin <chase.maupin@ti.com>
(From OE-Core rev: dc303cbf25cf48aa98ff1979882820dd25f8cd9d)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ${PN} also means that uclibc-initial gets to provide it
which we do not want
(From OE-Core rev: d90c5e093250a04d813b66ff586bda849ca6fed3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a backport from oe master of the code which adjusts the busybox
config according to DISTRO_FEATURES etc.
(From OE-Core rev: b5564c4a9cadf306b447180c433b25ec071f8ce1)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ext3 format is pretty much mandatory for qemu usage, so always create it.
(From OE-Core rev: 94da548810eece652bd32fb68a36f978b7d7cf2a)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings in new patches from 4.6 release branch
updates the comment section of existing branch to not
contain patch numbers.
Tested build on qemu for arm ppc mips x86 and x86_64
(From OE-Core rev: 3968f33b6542cf20cf63cf49bfbc033bd2486295)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Migrate configurability from oe, try to shrink minimal image size
All eglibc configuration options are included in conf/distro/include/default-distrovars.inc.
Define DISTRO_FEATURES_LIBC and DISTRO_FEATURES in local.conf with the same way
in local.conf.sample.extended to enable those options.
(From OE-Core rev: 022ca1d1357caafdfe23aa9ab82f90ba89b6942b)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need http://www.eglibc.org/archives/patches/msg00923.html
to get through the problem we see when OPTION_EGLIBC_RTLD_DEBUG
is disabled. This patch has been backported to both 2.12 and 2.13
branches. We bump SRCREVs to have that change.
(From OE-Core rev: 30558af716833c52ce1eae4c408a6794aad96cb2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the local patches were applied upstream, so let's build straight from git to make that clear
(From OE-Core rev: 28246a275a0d7208f0361735685688803965648e)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use libc-uclibc override to seprate out uclibc bits
instead of using TARGET_OS
(From OE-Core rev: e1f0ba3b1cccaf8e209d63dab638b341c029aae6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So multiple provider problem can be reolved amicably
(From OE-Core rev: 904749315385b3c2951a23748577cb65b862606b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a verbatim copy of the corresponding class from oe master.
(From OE-Core rev: fa32b087888bab399a5cd1e3f16213575fe396e2)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this you get:
| libc/sysdeps/linux/common/epoll.c: In function '__libc_epoll_pwait':
| libc/sysdeps/linux/common/epoll.c:71:80: error: memory input 7 is not directly addressable
| libc/sysdeps/linux/common/epoll.c:75:86: error: memory input 7 is not directly addressable
| make: *** [libc/sysdeps/linux/common/epoll.o] Error 1
(From OE-Core rev: aeacad638c2a3d5f0b6299edc3890fdaad312c79)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build ghostscript-native fails on a i686 machine because it can't get
the source objarch.h and soobjarch.h, and .h files are not needed for
native package, so update the SRC_URI to fix it.
(From OE-Core rev: 4091e811c04245d53bc1bb82087e3e476c7c8c1a)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Removed the do_configure_prepend and folded into the target do_configure
since the native was picking it up for the do_configure_virtclass/native()
and then failing on i686.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1155]
I thought git-native could depend on perl-native-runtime and tests on
Ubuntu 9.04/10.10 and Fedora 13 show it could buid fine (looks these distros
install perl-ExtUtils-MakeMaker by default).
However Joshua reported on Fedora 15 i686 host, git-native can't build unless
he manually installed perl-ExtUtils-MakeMaker to the host.
This makes me think we may as well make git-native depend on perl-native.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The existing recipe names for the linux-yocto kernel builds
worked well when there was a single, or two versions of the
kernel available. But with the impending kernel updates and
retirement of older kernels, the re-use of the same recipes
for different kernel versions violates the principle of least
surprise.
To address this, the recipes are being renamed as follows:
linux-yocto_git.bb -> linux-yocto_2.6.37.bb
linux-yocto-stable_git.bb -> linux-yocto_2.6.34.bb
There continue to be versionless recipe names that feed into
versioned recipes at the appropriate points. They are:
linux-yocto-dev.bb (tracking the latest yocto dev kernel)
linux-yocto-korg_head.bb (tracking korg kernels)
There are no existing users of linux-yocto-stable in the master
branches to convert to the new naming, so these changes work
in isolation.
(From OE-Core rev: 576c87349a72a94357014ff29f55db692903ed80)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason for uclibc to be machine specific. Remove local
assignment to PACKAGE_ARCH so that it gets the default target
architecture and bump PR for that change.
See http://lists.linuxtogo.org/pipermail/openembedded-core/2011-May/003064.html
(From OE-Core rev: 6625936c011aa939e60041dc6be9850e925a6cc3)
Signed-off-by: Phil Blundell <philb@gnu.org>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This chunk of python code has been around for a while (witness the
comment about gcc 3.4.0) and predates the availability of
COMPATIBLE_HOST. Rewrite it using a more modern idiom.
(From OE-Core rev: c0f8fc3579fb4cebc0bd01b868d919738f9b03a9)
Signed-off-by: Phil Blundell <philb@gnu.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only have arch specific machine fragments now.
Introduce use of KCONFIG_ALLCONFIG and use allnoconfig
(From OE-Core rev: b87df62a0bb402a1b1dbdee182c1ffd2787979bf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update LIC_FILES_CHKSUM:
1) COPYING: only format change; no actual license change.
2) 0.22.0 doesn't have pixman-x64-mmx-emulation.h, so let's remove it.
(From OE-Core rev: d0a8130b688d270bac1119aa1b1fde6cb2397a39)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update LIC_FILES_CHKSUM due to the only change:
+ Copyright (c) 2002 XFree86 Inc
(From OE-Core rev: 4110a9161487b43a3207ee4c89af38d7c9d27f5d)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1163]
For some test I need to back to use gcc-4.5, so I changed GCCVERSION and
SDKGCCVERSION to "4.5.1", but I found gcc-cross-canadian's 4.6.0, rather
than 4.5.1, would be built! Finally I made this patch to fix the issue.
(From OE-Core rev: 40ae82136b0bd8fc0dc74225700afbb9017a8c38)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OVERDIDES is the key variable that needs to be set prior to data finalisation.
The other variables should be manipulated after finalisation so any
DEPENDS_prepend and _append are accounted for. This patch ensures this is
the case.
The PACKAGES maniupulations are not enabled at this time as they
don't function 100% correctly yet.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is particularly important since the file doens't use BBCLASSEXTEND
and PN is therefore misleading
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit c553b3934f45db8a6e77cfc7673787db3cc64f85.
This change clearly breaks builds since subsequent patches
depend on changes this patch removes. Not sure what's going
on here but this change isn't correct.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This massively cleans up the dependency handling in the two classes
when interacting with BBCLASSEXTEND.
This change has a dependency on the bitbake override handling change
and also the existence of the RecipePreFinalise event.
(From OE-Core rev: f183c7cfe377fa6ed2777605c3590a9dda2060df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When pseudo is disabled, certain programs that call realpath may not
work properly. This was discovered when using the Qt MOC tool when
certain qmake project features are used.
[YOCTO #1150]
(From OE-Core rev: d1d87429d751e0bff115ff60d1b5fc55b8fa6249)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implements the improvements suggested in the original fix for [YOCTO #1131]
(From OE-Core rev: e9cde6962d369fb620799d0370ea9dc7d6234d37)
Signed-off-by: <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the gtk+ from OE-core you would get:
WARNING: the following files were installed but not shipped in any package:
WARNING: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so
(From OE-Core rev: 6012828219bbfc55b273f4795853433bbde0ea37)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There doesn't appear to be any terribly good reason for kexec-tools to
depend on the kernel. (I verified that kexec-tools is buildable in a
clean TMPDIR without having previously built virtual/kernel.)
Having this dependency in place is a nuisance because it makes it
awkward to put kexec into an initramfs. So, it seems like we would be
better off without.
(From OE-Core rev: ba6da75657d0bf9ed48f0d6c4132f12993648e7a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One incorrect date format caused a checking failure in package report system.
(From OE-Core rev: e2822a65715858c84654debee2219cf954db4d8c)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"grep" command will return 1 if nothing is grepped, which will cause
the udevd daemon not working correctly.
This fixes [YOCTO #1146]
(From OE-Core rev: 155a10287bbcac583d95325ab2a7b09e04bb4b90)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update both the core and pseudo_git packages to the latest 1.1.1 verison.
This fixes an issues where the call system() was not wrapped. This could
lead to issues where certain spawned commands broke out of a pseudo-chroot
and created files in the wrong place.
Also the update the 1.0 -> 1.1.1 adds additional capabilities such as
beginning support for MacOS X.
(From OE-Core rev: 9eaa9ed38a197be76317cd3e42f54d1808c3e971)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pseudo to tracking, with me as the maintainer.
(From OE-Core rev: 8b33a17f45b31a76eadaab7e8934358eb2e96859)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initramfs-live-install is only compatible with i.86|x86_64 so
shouldn't inherit 'allarch'. This comments it out.
More specifically, commit 52295fa3de
(Improve handling of 'all' architecture recipes and their interaction
with sstate) sets TARGET_ARCH which due to the COMPATIBLE_HOST setting
in the recipe causes it to be skipped and gives the following error
for any -live build:
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'initramfs-live-install' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['initramfs-live-install']
ERROR: Required build target 'core-image-sato-live' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-sato-live', 'core-ima\
ge-minimal-initramfs', 'initramfs-live-install']
ERROR: Nothing RPROVIDES 'initramfs-live-install'
(From OE-Core rev: e576e4aa91fc1608f706a341088f9a7b9a21cd2a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Commented out with explaination instead of remove
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages like systemd only want agetty to spawn a console and not drag in all of util-linux just for that.
(From OE-Core rev: 16a732e6854dd62858af23994fa7f443607e9944)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older versions of sqlite required tclsh at compile time but this is no longer
the case with recent 3.7.x.
See http://lists.linuxtogo.org/pipermail/openembedded-core/2011-June/003653.html
(From OE-Core rev: cf8ef471d9620011e52462a84962b7f7ebf4e128)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During work on 1.1 BSPs, some driver options changed. The
result was that the upstream fix b1d670f10e8078485884f0cf7e384d890909aeaa
needs to be available for all BSPs.
These SRCREV updates are the result of making that commit common.
(From OE-Core rev: c5dddf2dec0c6aed1db44a7ecf14d13502759d03)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This SRCREV update picks up the following changes from the
2.6.37 kernel tree:
- fishriver: create and use a dedicated BSP branch
- fishriver: usbnet fixes, but common to all boards
- standard: update omap baseline match the 2.6.34
upstream merge content
Built and boot tested on qemu*
(From OE-Core rev: 0843f22d34c0c9d2424a595aea0a2410e7d6ce23)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENCE checksum updated due to a one-line change in the file (RedHat
was added as a copyright holder).
(From OE-Core rev: 969cdde4541819ef5123a77391d870843aff0b55)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instruct RPM to use the on-disk permissions, owners, groups,
and directory permissions, instead of defaulting to root:root
Code changes suggested by Mark Hatle.
(From OE-Core rev: a6464f9484f56f596e3215184ad56ac6769ebb0c)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PSEUDO_PASSWD needs to point to the directory where passwd and group
files are kept. This will allow pseudo to use those users and groups
to change file ownership.
(From OE-Core rev: ada60e40293f78f974f641de5d3356b02bbeae4c)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The passwd, group, and login.defs files in the target sysroot will
be used when recipes create custom user and group permissions in
their packages.
(From OE-Core rev: 4450b73e57bcd73b8d09d8cd898a97bad04ae27b)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a -native recipe for the shadow utilities.
The custom --root option allows the the following utilities to be
run within a chroot when invoked under pseudo:
* useradd
* groupadd
* usermod
* groupmod
* userdel
* groupdel
* passwd
* gpasswd
* pwconv
* pwunconv
* grpconv
* grpunconv
They can then be used to manipulate user and group account information
in target sysroots.
useradd was also modified to create home directories recursively when
necessary.
(From OE-Core rev: 37b8c18a3c2f3e77a9810a56a8ee786855ae1ba3)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Taking over maintenance of the shadow recipe. Cleaning it up in
preparation of adding a -native version that will be used to add
users/groups during preinstall.
(From OE-Core rev: 254ca8c1667b8d35914555714239a09bfb4f43be)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
.. since this is where collect2 seems to look for them. This seems like
it is really a bug in collect2, but installing the symlinks is an easy
workaround. Without this you get "could not find ld" errors when using -flto.
(From OE-Core rev: d69561d80a995a52f3c7abfdbfd183fc7846046d)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sometimes it's usefull to remove only sstate cache and keep downloaded sources for rebuild
(From OE-Core rev: e071bc9982fc3ace3a32a990905884929392c4b6)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
util-linux 2.19 needs this patch to successfully
compile on uclibc systems. This is a bug in util-linux
that goes unnoticed on eglibc builds.
(From OE-Core rev: a244bd1a8c98a970979e6bcfbd24c8a5b398ed0e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If not overridden it gets the value which is for target recipes
usually defined in machine tune files
(From OE-Core rev: 7efd372eead4185e8b763c6f7ee1943485f7d84d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version of bison needs m4 1.4.16 or newer
(From OE-Core rev: 8aa07da69f4966afda40d77b1e8b83749c5d1c28)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And rebase the patches to the newer code.
(From OE-Core rev: aa24c1eda4b33b329d330c8bbb6d243dfd924f62)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support translation, qmake based projects usually call lrelease and
lupdate however OE changes the binary names so this needs some mangle
to work out of box.
(From OE-Core rev: 2a52f806f3789f717219651b97dc64fec3881f7f)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are tools within gettext that make use of git, crazy as it may
seem so we have to ensure a recent version of git is available.
It could be worse, it could be the (deprecated) cvs alternative in
the code.
(From OE-Core rev: 239bf1973099f938663b2f5c7c68410a3582f06a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The inittab file depends on variables that are part of the machine config
such as the SERIAL_CONSOLE so the whole recipe must get built as machine
specific. Better might be to split the config out into a separate recipes
from the binaries but this fixes the immediate problem.
[YOCTO ##1131]
(From OE-Core rev: 5bcd6b2c3e935858ac80b17266b9e427060c1650)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't package /etc/rpc and do_install() makes some effort to remove
that file so as to avoid the "installed but not shipped" diagnostic. But,
due to a typo in the command line, the file wasn't actually being removed
and the diagnostic continued to be issued.
(From OE-Core rev: 5b09d5dbac044277b5f1145057d1fc716ec35b9a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The glob for libc_baselibs was too permissive, causing some of the libcidn
symlinks to be placed in ${PN} rather than the intended subpackage. Worse,
the .so itself was actually landing in ${PN}-dev, so the net effect was to
make libc6-dev a dependency of libc6.
Bump PRs for both 2.12 and 2.13 as a result.
(From OE-Core rev: b41a9d1b536ffef5f86dac40f34b44db463a1038)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The native variant already configures --without-x so the X11 libs are
redundant. Adjust the DEPENDS to match.
(From OE-Core rev: ec49721cb01cef56c9275841bd69b74ac9d5ed73)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update override naming (_native -> _virtclass-native) to disable perl
and python bindings when building native rpm, and adjust the DEPENDS to
match.
Perl bindings were, in fact, already disabled for both native and target
builds so it's only the python ones that have really changed.
(From OE-Core rev: a0fd5d332da24a1830ee7bd1030cfb5af384bb1c)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a keyword, Upstream-Status is case sensitive.
(From OE-Core rev: 874038469e28d011b60b2d4bfd5a6fada6e754c4)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug: [YOCTO #1095]
Because of cross-compiling libx11 keysyms will cause Xts5 test of LSB fail.
libx11 use a tool named "makekey" which compiled as a native tool to generate
ks_tables.h. Because the size of "unsigned long" is different between 32-bit
and 64-bit, we should judge whether our target is 32-bit or 64-bit and tell
"makekey".
I add a patch to "makekeys_crosscompile.patch" to "src/utils/makekeys.c" in
order to deal with the different targets. If our target is 32-bit, we force
the variable its type is "unsigned long" to "uint32_t". So we can generate a
correct keysyms.
(From OE-Core rev: 0eea9ab2e9d6e9457f24aa63b3126666611c1c7b)
Signed-off-by: Jingdong Lu <jingdong.lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 1030]
Because it is fixed by Qing He, then add cups and ghostscipt into image
(From OE-Core rev: 39a3842c34cf344749d7269a91c47e3a1a86d2b8)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1130]
This patch brings in a patch from gcc for the following issue:
http://gcc.gnu.org/ml/gcc-patches/2011-03/msg01477.html
(From OE-Core rev: 347c30801b6f935a6aefa5578d723a8afcf52790)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If all the postinsts were successfully run in offline mode, and
package-management hasn't been requested as an IMAGE_FEATURE, the opkg
metadata is now redundant and can safely be deleted.
Also, the update-rc.d and base-passwd packages can be removed since
they will serve no further purpose in this situation.
If some packages are still unconfigured at this point then we need to
keep their metadata around so that either opkg or the awk script can
configure the packages at boot time. In theory it would be possible to
strip out the data for packages that have already been configured, but
right now we just hold on to the whole status file in that situation.
(From OE-Core rev: 87780fc09b066525e47d0f50ee5497db54d304cd)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SElinux has been disabled in the recipe, leading to messages like this:
[ 167.643218] login[312]: PAM unable to dlopen(/lib/security/pam_selinux.so): /lib/security/pam_selinux.so: cannot open shared object file: No such file or directory
[ 167.670837] login[312]: PAM adding faulty module: /lib/security/pam_selinux.so
(From OE-Core rev: b90e9c2318fc421f37c57788ece54ce791a90b62)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-core uses 'dbus-1' as initscript name, which no other distribution(-buildsys) does, so we have to take special measures.
(From OE-Core rev: 42ee84c9a8be494943488ebb0bf2048f3abd7abc)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a backport of 952e5e2b7a5c1deefc939594d40b81a71fb16a54 from oe master.
Without this the script mangling goes very wrong if ${prefix}="". There
isn't really any way to fix this in the completely general case, but
this patch does work with the two cases I tested (freetype and
gpg-error) which were unusable previously.
(From OE-Core rev: 854b15bf631452150d1979dfd8286b306f108688)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is basically a backport of the current state of the art from the
openembedded master repo. In particular this fixes an installation
error on micro:
| + cp -dPr /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/bin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/sbin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/
| cp: will not create hard link `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image/bin' to directory `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/bin'
| cp: cannot copy a directory, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image', into itself, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image'
| ERROR: Function 'do_install' failed (see /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/temp/log.do_install.3808 for further information)
(From OE-Core rev: 613d0275a59be9154c2a2cdc101bd3e2c79a6d44)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix bug [YOCTO #1092]
Own a directory "/var/lib" before do_install() because if there isn't this directory during installing, \
then script "mkinstalldirs" from "sudo package" will create directory "/var/lib/sudo" by recursion with mode "0700" \
which will cause bug [YOCTO #1092]. So I add do_install_prepend() to create a "/var/lib" which can be accessed \
by common user before installing files.
(From OE-Core rev: 16bbeb2d866a07abd5379d1de30f2b747e1693fe)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle
Khem Raj
Richard Purdie
Bruce Ashfield
Paul Eggleton
Xiaofeng Yan
Zhai Edwin
Koen Kooi
Tom Zanussi
Phil Blundell
Dexuan Cui
Saul Wold
Kang Kai
Anders Darander
Nitin A Kamble
Mei Lei
Dongxiao Xu
Scott Garman
Otavio Salvador
Martin Jansa
Phil Blundell
Jingdong Lu