We need to pass the URL for the build action as javascript
parameter, since the project ID is different for each build,
instead of using the project id of the most-recently-used project.
(Bitbake rev: 35c1de4b05c64ee1c436be2dfbd97dcf9ed9ed71)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add improvements in data reading, following
issues discovered in testing.
- elapsed_time is now read from buildstats
- we add safeguards to not fail logging if the build was triggered
with a toaster_brbe configuration, but it's running in
1.6 mode
- added log markups for build finish to let other programs
known when the work is done.
[YOCTO #6833]
[YOCTO #6685]
[YOCTO #6887]
(Bitbake rev: 0b225035cefee3d3713a93f9a432e5e4d4e174f1)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ideally, we want the PR service to have minimal influence from
queued disk IO. sqlite tends to be paranoid about data loss and
locks/fsync calls. There is a "WAL mode" which changes the journalling
mechanism and would appear much better suited to our use case.
This patch therefore switches the database to use WAL mode. With this
change, write overhead appears significantly reduced.
(Bitbake rev: 0cdd48261daeb17efc528b5de0ac81c8836e8565)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has always bothered me:
NOTE: Preparing runqueue
NOTE: Executing RunQueue Tasks
This patch changes the messages to be consistent.
(Bitbake rev: 72ac9f9227fbfb4dc8b933b357d21aa0e4060959)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Beautifulsoup module because fetch/wget latest_versionstring
method depends on it.
This provides support to fetch/wget.py module for search new package
versions in upstream sites.
(Bitbake rev: 4626c9b77e5eded97507b6f9ca0d891f9a54bb8a)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it possble to fetch Gerrit review references which are
normally stored under refs/changes.
Please disregard previous patch with the same topic.
(Bitbake rev: 268e9c0c6830e8e621c418f20c2ca12dc840e48b)
Signed-off-by: Fredrik Svensson <fredrik.svensson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sync/commit calls are happening in the submission thread which can
race against the handler. The handler may start new transactions which
then causes the submission thread to error with "cannot start a
transaction within a transaction".
The fix is to move the calls to the correct thread.
(Bitbake rev: 92e128a0e331e563cfe48827e95939041c16c88e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update the layer vcs web fields to record extra URLs
for directory and file viewing. Updating the layers
view to show this data.
(Bitbake rev: 14762e182c8af22fd0fa96f0ba0db1ecd2495fbc)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add, for the localhost environments, the capability to
download build artifacts. This is a pontentially dangerous API,
because it gives unrestricted read access to the build environment
file system - do not expose the functionality directly to the
web layer, but use filtering/translation code, such as
exemplified in the build_artifact view.
The capability for remote build environments is dependent
on bug 6835, as to use the collect storage as intermediary
storage for serving files.
[YOCTO #6834]
(Bitbake rev: 5fce7f6e83c6143244faa9618b7ed20c1106e08f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We avoid a race between the setting the TOASTER_BRBE variable
and reading the variable in toaster ui by supplying the variable
at server startup time through the toaster.conf post-read file.
Additional small changes are included, including marking the
build request with the environment id of where the build took place.
(Bitbake rev: 7c333350418c4140e6c988c5272940f8057d327d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default django URL validator marks git URLs as not valid,
so we change the default validators to a URLValidator-derived
that adds git and ssh protocol schemas and inhibits the
frontend URL validator.
We update the branch names based on the white-listed
branch names in the Releases name.
Adds proper class string to ease usage in admin section.
Other small improvements.
(Bitbake rev: 7d51f895bd56bd18f2258059b377851c2ce82114)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Conflicts:
bitbake/lib/toaster/orm/admin.py
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default django URL validator marks git URLs as not valid,
so we change the default validators to a URLValidator-derived
that adds git and ssh protocol schemas and inhibits the
frontend URL validator.
(Bitbake rev: 7223619505c0939358287e5baf84da0a91cb8d34)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch brings in a new landing page to be shown
when there are no builds and no projects available.
The builds page now displays only only the builds part,
without the landing page bits.
There is a new projects page that displays the All Projects
table as specified in the design.
[YOCTO #6682]
(Bitbake rev: c6c7c05521daa9bf16c122d7d472330ca4c05e88)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We make sure we don't throw an exception when reading
non-existent variables from the database, and we return
empty data that can be displayed without ill effects.
This fixes the Configuration page on empty builds.
(Bitbake rev: 5b13eabdec1e8a052d343fd67654d7fe8974224f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We refactor the objects.filter()[0] pattern to the proper
Django QuerySet usage of objects.get() to make sure we
get one and only one object for a query.
(Bitbake rev: 6abec6631fbadaecc474f2a4e7981fde3c58657c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch definitivates the all layers page, providing interactivity
for adding and removing layers inside the project from this page.
[YOCTO #6590]
(Bitbake rev: e690080f83ad53c5e4a31e8c0fba2cc744eea1eb)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch rewrites the Project page and the additional
infrastructure in order to fix a bug that makes triggering
builds through UI impossible, and to introduce data feeds
for suggestions for the user.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We fix problems in the layer source update code related to
non-null field restrictions.
We add missing layer dependency update.
(Bitbake rev: e1169127405ce10a044ac9cdf4a892838a99d01f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the Angular JS library, release 1.2.23
https://angularjs.org/
We add the Bootstrap directives for AngularUI, release 0.11.0
http://angular-ui.github.io/bootstrap/
The license ued for all libraries is MIT
(Bitbake rev: 8b4d33a6182486795cca53b2832967de583281e1)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are in managed mode, and we inspect a build that comes
from a project, we modify the breadcrumb as to display
the project from where the build originated.
[YOCTO #6776]
(Bitbake rev: fe568c9350a691c863f9f5bf8703d639c12a9961)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We change the saving of the build id to the build request as
soon is the build is created, as to allow for a consistent
display of build data while build is in progress.
(Bitbake rev: 9504ca6a69ba6da21f88b3cc77fa5910d886b6c3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build dashboard is supposed to show failed
tasks (if any) in the "Tasks" section.
(Bitbake rev: fc2a7be3982ea5441beef1b7e9e187caf5df2beb)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify the help text we show for the "Task covered by"
information to indicate that a task can be covered by
more than one task.
(Bitbake rev: cad45dfebaabe1875f786ba7ceeb3ee377e926b3)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For builds that generate no rootfs files, an extra <div>
was being added between the build status and the build
summary section. This commit removes the extra <div> and the
white space it created.
(Bitbake rev: e84db294f733464b4952a3c92120e5b19e8c2750)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sorting in this column is tied to the sorting by
"Size". If we make both columns sortable, when you sort
by one of them it also sorts the other, and the table looks
as if you have sorted by 2 columns at the same time.
This was fixed in YOCTO #6061, but turned up again.
(Bitbake rev: acf372eb5a083451ab1507dd24e3a84380420c9a)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the background colour of table rows with the .error
class from white to transparent, to make sure the blue
highlight animation works when you click on the order
number in the task details page.
(Bitbake rev: 25fd347b6a972164af9a0b5b56f803a296290246)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure the reverse dependencies tab for included packages
shows a notification when the number of reverse dependencies
is 0, instead of an empty table.
(Bitbake rev: 8dc3e582eb5f1d6e9a79de59a53014495a48e862)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Prebuilt task could be based on" table we provide in the task
details page for prebuilt tasks is missing the task descriptions.
This patch adds them.
[YOCTO #6328]
(Bitbake rev: 64894d640ee70a301f6f399db118ed17c0ccde08)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the templates basetable_bottom.html and basetable_top.html
remove the '2' and '5' options from the 'show rows' menu, and
add the '150' option as per design specs.
Alex edited conflicts.
(Bitbake rev: 03f7ba3d8a101e05c106e5fb65eb379a6e4cb476)
Signed-off-by: Belen Barros <belen.barros.pena@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For those packages renamed at packaging time, the help text
in the 'Reverse runtime dependencies' tab was missing the
original package name.
[YOCTO #6327]
(Bitbake rev: ca8fc7bd4ad940c8eeefa57619a6c8423f116fc7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update the checksettings command to allow for upstream
git url detection at runtime by looking up a named remote
of a local repository.
Also various small fixes in check settings.
(Bitbake rev: c127ecb3b5b27b705b8714af063d910b944c8bbc)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to consistently use LogMessage.INFO/WARNING/ERROR to make sure toaster knows
how to categories these rather than passing in the "raw" loglevel value
which in best case comes from python logging but worst case any value.
[YOCTO 6885]
(Bitbake rev: 3aa13bc1d8218c97c76581a895fa5f03ff807fbe)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the commit 'prserv: Ensure data is committed', the PR server moved to
only committing transactions to the database when the PR server is
stopped. This improves performance, but it means that if the machine
running the PR server loses power unexpectedly or if the PR server
process gets SIGKILL, the uncommitted package revision data is lost.
To fix this issue, sync the database periodically, once per 30 seconds
by default, if it has been marked as dirty. To be safe, continue to
sync the database at exit regardless of its status.
(Bitbake rev: 424df64f2e9679043f0ce2b4f7dfc59c3d404304)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See http://www.nongnu.org/lzip/lzip.html for details on the compression
format.
(Bitbake rev: 9027b1273b5405c7269b013604ab417771b5eafe)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forcing strict to be a string, to avoid problems when performing comparisons
[YOCTO #6762]
(Bitbake rev: b8ed2098bdea2afd93ab4e3e1b834f3a31cb60de)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We fix the rendering of the size field in dirinfo-related pages
by directly calling filtered_filesizeformat and not rendering
it through the template engine.
Additionally, we enable error dumping into logs if an
Exception happens.
[YOCTO #6669]
(Bitbake rev: afa2431c21b8271b05dc4cca4265f98d9f338007)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If localhost resolves to a remote address (due to a misconfigured network),
starting the pr server will fail without useful information.
To reproduce, add '<bogus ip> localhost' to /etc/hosts and run
'bitbake -p'. The error message will be:
ERROR: Timeout while attempting to communicate with bitbake server
ERROR: Could not connect to server False:
Running 'bitbake-prserv --host=localhost --port=0 --start' will fail with:
error: [Errno 99] Cannot assign requested address
Since these errors does not show the IP address of the attempted socket
binding, this results in a lot of wasted time looking at firewall rules, etc.
This patch results in the following error message if the socket binding fails:
PR Server unable to bind to <bogus ip>:0
(Bitbake rev: fae5914030bcf4c061c22fc61034c40c87b7121a)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob was adding the redundant characters "\1" in SSTATE_MIRRORS variable. If
needed it is expected the user will add this instead so remove the code
that was doing this.
[YOCTO #6600]
(Bitbake rev: 73bf120062fc00c7e26dc4e77a7d140658d89daf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes urls of the form file://some/path/file;subdir=b. It also
adds in a couple of tests so we now tests these corner cases.
(Bitbake rev: 46306912a96444790efa9418d934dfdd36773ba1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check if the 'subdir' parameter exists and assign it to 'destdir' so that
files are copied in ${WORKDIR}/destdir. This fixes urls that are of the form
file://a;subdir=b.
(Bitbake rev: 836a986b365eb9798563ec08d90b346596de7791)
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Writing a log that the filesystem isn't being monitored for inode usage just
confuses users who are not aware about the nature of inodes in their filesystem,
so don't say anything, just silently disable the monitor. In general this only
happens on filesystems which don't have a limit on inodes.
(Bitbake rev: ca93bc84ee5fb94a50c11c47e4d212d7da649e24)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I could apply the label "release_1.0" to a super project that contains
many sub projects. If my recipes have SRC_URI's that use that label but
grab different sub-folders, than there's a bug where the cached localfile
(tar.gz) will not be unique and reused at the wrong times.
SRC_URI = "p4://perforce::1234@//depot/SuperProject/MiniProjectAAA/...;label=release_1.0 \
p4://perforce::1234@//depot/SuperProject/MiniProjectBBB/...;label=release_1.0"
(Bitbake rev: 3b5b1703b77490116dda895b29737cea51a3d6a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using options like -k, -f, -v and so on with the memory resident
server, they'd currently only be set on the initial values passed to
the original command. This ensures they now match those specified
on the commandline for the options where this makes sense.
To make this work, a command to update the options on the server side
is required so this is added.
[YOCTO #5292]
(Bitbake rev: 1c75cc4d0c8b606c1fe76e6bf60bf6a32298b105)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have:
FOO = "${bindir}/X Y"
FOO_remove = "${bindir}/X"
the expected result is "Y". Currently this doesn't work since the removed
expressions are not expanded first. This patch adjusts things so the
expressions are expanded before being processed for removal.
Also add a test to ensure this case continues to work.
[YOCTO #6624]
(Bitbake rev: 72a1ca4a104ccab73d6abcbd44db9c2636a58572)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to transfer some of the siggen data from the core/cooker into
the worker instances. There was a partial API created for this but
its ugly and its not possible to extend it from the siggen class.
This patch completes the interface/abstraction for the data and
means the class can extend/customise it in any siggen class.
(Bitbake rev: cf2d642052979d236185c5b8ca2c5478c06e62ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately it seems like the external use of the cooker
enableDataTracking() function broke at some point since the code that
reads it now runs within BBCooker's constructor. Since this now has to
be done early, add a parameter to Tinfoil's constructor to allow
enabling variable history tracking.
Fixes [YOCTO #6676].
(Bitbake rev: a9439b136f55f3f0e80ff053cd3b159da69ba362)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Code is related to the basetable templates files.
It had mixed tabs and spaces and was miss aligned in various places,
making it hard to read.
(Bitbake rev: cdaea8951df6b707afd1fefbf22295088256dd6f)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now cookies were used to save which columns were shown and which
were hidden in toaster tables. The tables from the templates also have
functionalities like sorting the entries on a certain column and
limiting the number of entries displayed on a page. The later however
were not saved using cookies. This patch brings this new feature.
The cookies are not saved only in the front-end. They are saved both
in the frontend in case the user uses the inputs/buttons to change
a parameter and also in the backend in case the user specifies manually
using GET variables the value of the parameters.
When no GET parameters are given the views will redirect the url to one
containg the parameters saved as cookies. When no cookies exist, default
values will be used.
[YOCTO #6126]
(Bitbake rev: 880b58c845e3a501fa90d24e1bd89c87ca84b709)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to avoid problems when using JSON serializer for
saving sessions, we move from storing the objects themselves
in the session to storing the object id and reloading the
object when retrieved.
This allows, for example, to use cookie-storage sessions if the
infrastructure owner so desires.
(Bitbake rev: 39d0f0c2e87d4b161f1eeaa2657e61b5a6bc9ee2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enable support for starting builds on remote machines
through SSH. The support is limited to poky-based distributions.
We refactor localhost build support and we update
bldcontrol application tests to uniformely test the APIs
of localhost and SSH build controllers.
[YOCTO #6240]
(Bitbake rev: c2ad9c9bb83f61c171434324df8c4d5ee655a556)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We rename the projecttags in bldviewer.templatetags to
simple_projecttags in order to avoid conflict with the
similarly named tagset in toastergui.
The conflict leads to an intermittent bug where proper
tags are not read correctly since Django uses only the
module name as global tag library identificator.
(Bitbake rev: a37f2c194d7e59611177cb8755524b7ad702fe91)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the improved exception handling added in an earlier commit bitbake
now stops when recieving a SIGWINCH. This happens frequently when
disconnecting and reconnecting tmux sessions and bitbake didn't survive.
Restore old behaviour of ignoring interrupted system calls but keep
proper exception handling for other errors.
(Bitbake rev: 418358a595c75f45b8d15160ec42bbe569562d91)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add new pages for the layer importing, layer details,
showing project builds and project configuration.
The pages are in read-only mode, but they're needed as
to be able to verify the quality of data in the system.
Write capabilities will be added in a subsequent patch.
[YOCTO #6595]
[YOCTO #6590]
[YOCTO #6591]
[YOCTO #6588]
[YOCTO #6589]
(Bitbake rev: eed9ae5c2a2bd7567e12ae9a4f02a5a966a1e1a3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add new pages for the all-machines and all-targets
project-related views.
We update the existing template structure to create
a base project view, similar to a base build view, that includes
a breadcrumb.
Updating existing all layers view to use the new structure.
We update methods in the models to provide corrent
information display.
[YOCTO #6592]
[YOCTO #6593]
(Bitbake rev: 973f582a19441c1ec67061160e4c50ce03ed7b68)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We move the code to calculate build progress as percent
and the ETA of the build to the model, so that they can be
reused across different pages.
(Bitbake rev: c2ced09e7ea4a1762d2788bb12a761734d20fd8e)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update pages and queries to match the new project
models.
(Bitbake rev: 8f47ec259106da714260c7388cee75a6c1f4622d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update the build controller application to make proper
use of the bitbake specification in project settings.
Added heuristic to detect when the meta* layers and bitbake
are checked out from Yocto Project poky, and use a single
git checkout.
Building without a proper oe-init-build-env is not yet supported.
(Bitbake rev: 9eafe14956013f5af39b68fc93e1b03e7ea1f5c2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enhance the checksettings command to try to automatically
detect settings for running on localhost.
The checksettings will look for a nearby poky layer source,
for a nearby build directory, and will try to import settings
from "toasterconf.json" files found in the local layer.
On new configuration, it will also perform updates from the
layer source.
(Bitbake rev: 2aab77dfccb538e2b09829841ea6c464d40cafb1)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add a page where the user can browse
and import layers from all the layers known
by Toaster.
[YOCTO #6590]
(Bitbake rev: 59f4a9750a6c4f5360a91e3a4d1c03ceb42da086)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We create the navigation structure for the project section.
This includes adding URLs for configuration, builds, all layers,
layer details and all targets pages.
Changes to existing pages to exemplify navigation links.
(Bitbake rev: 6f0cb9d106129eb496a4c009d95b0727378e97c1)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enable the admin interface in Toaster.
We add admin models for Build Environments (where the
sysadmin can configure where the builds take place)
and for Layer Sources (marking the upstream provider
for layer information).
The admin interface and associated data are enabled
only for the MANAGED version.
(Bitbake rev: 6618613c9210fb44d36d90f5f2404b435f10dfc8)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add a ToasterSettings table that will keep
installation-wide settings.
We update the models for the layer-related data storage to
make them compatible with the layerindex application API.
We add a LayerSource class that can update local data from
a LayerIndex-like compatible API.
Adding a command line option to perform information update
from all upstream layer sources.
Fair warning - there is no backward migration from 0013.
(Bitbake rev: 89e13579e1b44b738f10fadec8454aa0e6f073af)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We fix application discovery, tuples don't have .append().
Other minor fixes.
(Bitbake rev: a6f18aac3e6bb448d89a3425a2f756c6514ee595)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We refactor log saving to go through only one code path.
All logs that happened outside the build (i.e. before build
starting) now will be logged to either toaster_ui.log if the
build command ran in interactive mode, or to the build request
errors if the command ran in managed mode.
This enables proper display of error logs in project page.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the output in the python task/function run files is rather
incomplete and effectively useless. This enhances the code to take
advantage of the bitbake's dependency tracking and extend the output to
include dependencies. This makes the files more usable for debugging
purposes. Since this only happens at python function execution time, the
overhead is minimal in the grand scheme of things.
(Bitbake rev: 02667e048c3e632f857c87177c0022eaf5481802)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we get no profiling oversight into either the main bitbake worker
process, or the overall parsing before task execution. This adds in extra
profiling hooks so we can truly capture all parts of bitbake's execution
into the profile data.
To do this we modify the 'magic' value passed to bitbake-worker to trigger
the profiling, before the configuration data is sent over to the worker.
(Bitbake rev: 446e490bf485b712e5cee733dab5805254cdcad0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stream redirection of stdout is horrible. pstats takes a stream argument
so lets use that instead.
(Bitbake rev: 93d155f4766e27e7b004d13569aa03961fe89e3b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should only add user/password options if they're specified as in the
fetch case. Patch from Volker Vogelhuber <v.vogelhuber@digitalendoscopy.de>
(Bitbake rev: 303e6256947f4df4f283b75b7ccfdffa72864d67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if you have hard dependencies between setscene tasks (like avahi on
base-passwd through useradd.bbclass), other dependencies may not be installed
even if these exist in sstate. For example, avahi -> expat -> pigz-native
(and avahi -> base-passwd) yet if you cleansstate base-passwd:
bitbake gzip-native:do_clean avahi:do_clean expat:do_clean pigz-native:do_clean base-passwd:do_cleansstate
bitbake avahi | tee
you will currently see pigz-native being rebuilt even though it was in
sstate. The fix for this is to continue to iterate dependency chains
around hard blocked dependencies as per this patch.
After this patch is applied, you will see pigz-native installed from sstate.
(Bitbake rev: f787957a224e8c2682a19e5c4a4d9c86bdce52ba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 587b144ee409d444494d8d7f2d1c53ede8f7c953)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes an issue when trying to use depexp without specifying a
recipe. Before change:
$ bitbake -g -udepexp
Traceback (most recent call last):
File ".../bitbake/bin/bitbake", line 382, in <module>
ret = main()
File ".../bitbake/bin/bitbake", line 370, in main
return ui_module.main(server_connection.connection, server_connection.events, configParams)
File ".../bitbake/lib/bb/ui/depexp.py", line 201, in main
logger.error(cmdline['msg'])
NameError: global name 'logger' is not defined
After change:
$ bitbake -g -udepexp
Please specify a package name for dependency graph generation.
(Bitbake rev: 984ad90b2f1e29634dc79803a4a0404ab0534039)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
since python-2.5 string.endswith() takes a tuple
(Bitbake rev: 86a67a1fd4244da9343dbf14deed1ad0d3003f32)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With a shared work task like gcc, the task can be run from a variety of
different recipes which may have different virtual extensions in place.
Depending on whether gcc-runtime or nativesdk-gcc-runtime's do_preconfigure
task is called for example will change the sorting of the task hashes due
to the way clean_basename currently works.
The correct thing to do here is sort on the base filename first, then any
extension when ordering the hashes. This means we do account for things
like recipes with both a native and non-native dependency but we also fix
the shared work case where we don't care whether it was a virtual version
or not.
(Bitbake rev: 2e80b5d10a5037ed6f0bc227a1f9b42529c87086)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if an exception occurs in an event handler, the server shuts
down but the UI simply hangs. This happens in two places, firstly waiting
for events and secondly, sending events to a server which no longer exists.
The latter does time out, the former does not. These patches improve
both code sections to check if the main server process is alive and if not,
trigger things to shut down gracefully. This avoids the timeout in the
command sending case too.
This resolves various cases where the UI would simply hang indefintely.
(Bitbake rev: ac418e1112ff5f9c3157569316902f7a27fba4b4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our usage of multitprocessing is problematic. In particular, there is a bug
in python 2.7 multiprocessing where signals are not handled until command
completion instead of immediately.
This adds a workaround into our wrapper function to deal with the issue.
(Bitbake rev: a16185e602b39b71475aa7e9ee80ad2b1f28d0f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we trigger a shutdown whilst parsing for whatever reason, in some
cases we were not closing down the parser threads. This change
ensures we do so. The function names are not entirely intuitive
but the behaviour is more correct (and commented). The previous bug
with the stdout failure would trigger this one, if there was a cold
cache and parsing was required (but not otherwise).
(Bitbake rev: 25bfa2478f1c3a8eb695e1e5760e06db5be8f2fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, IOErrors are just passed over due to the broken Exception
clause. A command like "bitbake X | <invalid command>" would break stdout
triggering a traceback. With these changes we print the exceptions, shut down
the server gracefully and exit which is a much nicer behaviour and is less
confusion to the user.
(Bitbake rev: 9544108f7b413038d871ce6ca88232de2f2434d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if an exception occurs, we just run the idle handler again and
again, usually looping indefintely. Chances are the exception that occurred
will keep occuring and this is not a good place to be.
This was breaking the autobuilders with gigabytes of logs.
At least improve things so the cooker shuts down gracefully when this happens.
Some trace of the original problem may still be present on the console too!
(Bitbake rev: 1f28d8d3311262427938180435b68f0a35c2b330)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 000fa81013205dd9bc907ff7a61f06f57637212d)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: fd293c5fcc89bc7a541d09e88a6aec5e0b2a1db2)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 4e9aef14d747c37444a4fc683f9641906906afe9)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to have an event emitted when all of the sceneQueue tasks
have completed since the metadata can hook this for processing.
Therefore add such an event.
(Bitbake rev: 38d4f65bf1cbcdd5a2d60dff0e1d2859c34ed62e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re module was imported at the top, no need to do it again.
(Bitbake rev: c29c2370635075949c75937c237602600f4f10dc)
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
so that it doesn't check it twice for non-empty events
(Bitbake rev: e304ace6d8f7d0808ee401b7c01146b2798a81b4)
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out the codeparser cache is the bottleneck I've been observing when running
bitbake commands, particularly as it grows. There are some things we can do about
this:
* We were processing the cache with "intern()" at save time. Its actually much
more memory efficient to do this at creation time.
* Use hashable objects such as frozenset rather than set so that we can
compare objects
* De-duplicate the cache objects, link duplicates to the same object saving
memory and disk usage and improving speed
* Using custom setstate/getstate to avoid the overhead of object attribute names
in the cache file
To make this work, a global cache was needed for the list of set objects as
this was the only way I could find to get the data in at setstate object creation
time :(.
Parsing shows a modest improvement with these changes, cache load time is
significantly better, cache save time is reduced since there is now no need
to reprocess the data and cache is much smaller.
We can drop the compress_keys() code and internSet code from the shared cache
core since its no longer used and replaced by codeparser specific pieces.
(Bitbake rev: 4aaf56bfbad4aa626be8a2f7a5f70834c3311dd3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is a corrupt/invalid cache file, we'd keep trying to reopen
it. This is pointless, simplify the code paths and delete the dead
file.
(Bitbake rev: c22441f7025be012ad2e62a51ccb993c3a0e16c9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're writing out merged data to disk, its safe to assume that either
we loaded the data or couldn't. Loading it again is relatively pointless
and time consuming.
(Bitbake rev: 14c31e18e4a4a52ee54056aeefb09ff8c295b475)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes a name collision on the event.data
in the MetadataEvent class. event.data is used in the
event system as a copy of "d" in certain situations,
and this collision triggered a bug leading to data loss.
[YOCTO #6332]
(Bitbake rev: 3f191b7cfe95aea4d4e96babf001d62d45dd3aaa)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables the localhost build controller to
properly set the layers before the build runs.
It creates the checkout directories under BuildEnvironment
sourcedir directory, and runs the build in the buildir
directory.
Build launch errors are tracked in the newly added BRError table.
These are different from build errors, in the sense that the
build can't start due to these errors.
(Bitbake rev: 1868d5635b517e0fe1b874674ea7a78910b26e2e)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the first commit on the project main edit page.
At this point we have:
* the default settings for a newly created project
* the ability to add targets
* the ability to trigger a build command, and have
the build executed
Project layers now have an optional field, allowing for
removal. Default meta, meta-yocto and meta-yocto-bsp
layers cannot be optional.
We add XHR calls for interactivity in the main page.
(Bitbake rev: 4e438854120cbd10319df1b571ec93e334002325)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We move the initial_data fixture to a code migration,
in order to make sure that we don't overwrite modified data.
The data is inserted only if no data is present, instead
of always overwriting the entry.
The check settings returns 0 if the check was ok.
(Bitbake rev: 525c316ac95c06c52fbcfc836ca5599ee9dbfe8b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A layer may live in a subdirectory of a git repository,
so we add a field to track this setting in the Project layers.
We add the Project schedule_build function, which creates
a build request from the current project configuration.
We also fix an import problem with Projects in views.
(Bitbake rev: 1b5835e5d48cbfb7d38e38437c45d161052dfb37)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add explicit absolute paths for a directory where
the layer sources will be checked out (sourcedir) and
where the build activities will take place.
Adding minimal checking when starting the application in
order to make sure that BuildEnvironment (BE) settings are
usable. This check is ran by the toaster script at startup.
Modify the localhost bbcontroller to use the BE settings
instead of trying to self-configure on checked out sources.
(Bitbake rev: d17500d3f73fdeeef5f11fb3773a65e927be3f02)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 1cd369883469747a8158826bb8d67dcca2a8577f)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The clearcase fetcher is used to retrieve files from a ClearCase
(http://en.wikipedia.org/wiki/Rational_ClearCase) repository.
Usage in the recipe:
SRC_URI = "ccrc://cc.example.org/ccrc;vob=/example_vob;module=/example_module"
SRCREV = "EXAMPLE_CLEARCASE_TAG"
PV = "${@d.getVar("SRCREV").replace("/", "+")}"
The fetcher uses the rcleartool or cleartool remote client, depending on which one is available.
Supported SRC_URI options are:
- vob
(required) The name of the clearcase VOB (with prepending "/")
- module
The module in the selected VOB (with prepending "/")
The module and vob parameters are combined to create
the following load rule in the view config spec:
load <vob><module>
- proto
http or https
Related variables:
CCASE_CUSTOM_CONFIG_SPEC
Write a config spec to this variable in your recipe to use it instead
of the default config spec generated by this fetcher.
Please note that the SRCREV loses its functionality if you specify
this variable. SRCREV is still used to label the archive after a fetch,
but it doesn't define what's fetched.
User credentials:
When using cleartool:
The login of cleartool is handled by the system. No special steps needed.
When using rcleartool:
In order to use rcleartool with authenticated users an `rcleartool login` is
necessary before using the fetcher.
(Bitbake rev: 76cff0aaad4cf10b325bceadd8ea90b3d75edcc2)
Signed-off-by: Dennis Meier <meier.dennis@siemens.com>
Reviewed-by: Roger Meier <r.meier@siemens.com>
Reviewed-by: Christian Liechti <christian.liechti@siemens.com>
Reviewed-by: Henrique Mendonca <henrique.mendonca@siemens.com>
Reviewed-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you hit Ctrl+C at the right point, the system processes the request
but merrily continues building. It turns out finish_runqueue() is called
but this doesn't stop the later generation and execution of the
runqueue.
This patch adjusts some of the conditionals to ensure the build really
does stop.
(Bitbake rev: 39b08c604ba713100e174c136f81f18eca6ef33d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patches fixes the build - project identification when
running under managed mode. The build is assigned to the
project from which it was triggered, and to the
build request, as to simplify relationships queries
in the database.
(Bitbake rev: af1d3373706d365f9138caec110fcb20a5966b7b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the logic to create a new project. This page
also serves as user registration and silent login
for users.
Once the project is added, the main project page is displayed.
(Bitbake rev: 8855daebe55917c4f5855413d02ae1f3f7f76571)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is just a whitespace (end-of-line) fix.
(Bitbake rev: 5f33d1a240faa49bd8259a48eb15ef57a6b4ce55)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster uses the Django authentication system to assign
user accounts to the projects that are being created.
In the current implementation, the user accounts are
created/authenticated automatically, on the fly, based
on the fields specified in the create new project page.
(Bitbake rev: a9062d9692525e24e59b5b2bb4dfdef90b41bf2a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the new project and project page skeletons.
In the process, we add an identifier in the settings.py
to detect whenever Toaster is running in managed mode,
and a context processor to make this value available
to the template processor.
(Bitbake rev: 927a27c68e24cfe13f62ca5f0e60878b04fa4e24)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Issue: TA53702
It was observed that a sequence in a script such as
bitbake --server-only ..
bitbake --observe-only ..
bitbake <some target>
could generate events from the server to the observer before
the observer was ready to read the events, and the early events
of builds were consistently dropped. Adding a "ready" note in the
log allows the script to scan for that message before proceeding
to building a target.
(Bitbake rev: 9949948f92bbe2717a05a380d3df63a332d39c9a)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We automatically enable local applications in INSTALLED_APPS
based on detecting a models.py or views.py file.
This allows Toaster extensibility by adding applications,
without having to edit configuration files.
(Bitbake rev: 05b246095d161143ca2ebc126d9e70d198ab8bb8)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added code to automatically discover and add url dispatchers
to the urlpattern list. This allows extension of Toaster
through adding applications that will be automatically
registered with the URL dispatcher.
(Bitbake rev: 4000d8224206f404d174a5bc4aa49af55cb44d27)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We remove the unneeded strftime calls in filters, as the
filters can deal directly with datetime types.
[YOCTO #6379]
(Bitbake rev: 149693a342fe3a56027943d3ecb8bf2e1d0d652b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There may be a need to set the user for the transport rather than the subversion
command itself. Add a parameter to the url to allow this.
[YOCTO #6475]
(Bitbake rev: 56c294dc30b6c2575b1cf904e26b8b8bef7677c2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a '\n' to the last line of the file to fix:
No newline at end of file
(Bitbake rev: 54f1359ed2e9d47980cd221b7b43ef56543fe06d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a '\n' to the last line of the file to fix:
No newline at end of file
(Bitbake rev: 5eb65d92c35264087e5d82c35638f3b8805b1b3e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Close the definition list before adding the notification, and
restrict the notification width to avoid uncomfortable line
lenghts.
(Bitbake rev: b82f724c271c43218dc28440219adcea968e2a26)
Signed-off-by: Belen Barros <belen.barros.pena@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display message if no images are generated for a target. This
commit was amended to have more conditions for displaying the
message.
[YOCTO #6094]
(Bitbake rev: ac1911eb857f4759ed085c8a4fc4b47cefafcd7a)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is implemented as a django management command.
For the moment the 'manage.py perf' command will track the toaster
'gui' urls http response code and load time.
To use it:
1. do your toaster builds
2. ensure toaster is started
1. cd bitbake/lib/toaster
2. ln -s ../../../build/toaster.sqlite
3. ./manage.py perf
(Bitbake rev: 4a1fc6851d21500150715f0e8fa03c0b228ec5f2)
Signed-off-by: Ionut Chisanovici <ionutx.chisanovici@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the target (packages) page had to refactored to
allow the displays to differ depending on the caller
namely the license manifest link. Amended to make the
link from the tag rather than the pathname itself.
[YOCTO #6291]
[YOCTO #6079]
(Bitbake rev: b21a2af9411da17d49521820fa512292e89c856e)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now shared work signature data is saved to the non-shared directory
which is confusing to everyone including bitbake. Whilst its messy,
extra the stampbase data instead, which ensures the sig data is written
to the correct location alongside its corresponding stamp file.
(Bitbake rev: 7ae1d4844d9d3a76f86ef32c5a794e51e334e588)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the build control functionality to toaster.
* The bldcontrol application gains bbcontroller classes
that know how to manage a localhost build environment.
* The toaster UI now detects it is running under build
environment controller, and update the build controller
database and will shut down the bitbake server once
the build is complete.
* The toaster script can now run in standalone mode,
launching the build controller and the web interface instead
of just monitoring the build, as in the interactive mode.
* A fixture with the default build controller entry for
localhost is provided.
[YOCTO #5490]
[YOCTO #5491]
[YOCTO #5492]
[YOCTO #5493]
[YOCTO #5494]
[YOCTO #5537]
(Bitbake rev: 10988bd77c8c7cefad3b88744bc5d8a7e3c1f4cf)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We fix the calculation showing the estimated time
to build completion.
(Bitbake rev: dc1daae51ef5201475b5c1a69d966ae57b66dcb6)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add support to specify a connection token in the command line
and in the environment variable BBTOKEN.
When a client registers to a bitbake server, that client
will have exclusive access to the server. The client is identified
by a server-supplied token. If a client terminates, we cannot
reconnect to the server as the token is lost.
This patch adds the capability to specify the connection token
in the command line for xmlrpc clients. This allows us
to have bitbake work as an already-authenticated
client with the server and resume sending commands to a server.
(Bitbake rev: db5390940c0afbcdc9fbcf1225761968ae51d4a7)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add a function that returns the DATABASE_URL
for the current 'default' database settings. This
is useful to be able to start other toaster instances
with the same database settigns as the currently running
instance.
(Bitbake rev: 272a4bba0804bb6b5e0d498d3453321b5ed1dc76)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We create the model classes that store information
about triggering builds, and the available build
environments.
We add a fixture with a default build environment
for build control, using a "build/" directory under
the poky checkout directory.
We enable the bldcontrol in toaster starting script
and in the toaster settings as to allow the actual database
to be kept in sync with the source code.
(Bitbake rev: d4bfe9059f765f11244b97e324c0131f32f8e400)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build features of Toaster will be contained into
a separate application, as to modularize the Toaster
project and provide multiple options for deployment.
This patch adds the application as a barebone Django
application in the Toaster project.
(Bitbake rev: 08556b79b7b2af08aaeedf8733b1b8996f387c4e)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"set1 in set2" doesn't do what you'd expect, and if it did do a subset test
that's not the logic required by contains_any().
Instead get the intersection of checkvalues and val and check if the resulting
set is empty or not (by evaluating it in a boolean context), which tells us if
there are any elements in common.
Based on a patch by Valentin Popa <valentin.popa@intel.com>.
(Bitbake rev: 2e742c03e8dfdfa67899e7f5d579ed14bd87e139)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
contains_any is buggy so write a test case to demonstrate this.
(Bitbake rev: 25d10c349aab77bf99745c0a90dd8f9b90abccac)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gives us an easy way to find out which recipes have been excluded
from world when there are many layers.
(Bitbake rev: cf33d4bfc53ae8dc6353fa295e1acd789d4fc2d2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the Project class models to the
toaster GUI data model. There is no specified use,
and the link in the Build class is optional.
(Bitbake rev: 38f77a43d16e202d1f40632b27cb70dd20d02a5e)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the buildinfohelper only set a django settings module
environment variable if none were set.
This may lead to problems when the starting the toasterui
from an already existing Django environment.
As such, we always override the variable to provide the
correct name for the local Django settings module.
(Bitbake rev: 8271e61a2fbddd3fc49556829675478d7505d58f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We introduce the notion of a project in Toaster as the item
that holds the specification for triggering a build: the set
of layers used, the set of configuration variable values, and
the set of targets to be build.
Builds triggered through Toaster will be associated with a
Project, and they will be configured based on the project
settings at the moment when the build is ordered.
(Bitbake rev: 0bf0251ae05442ae260c6099b389bf765c4fef26)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We disable bitbake self start to prevent race condition.
ToasterUI will shutdown the server when the build is done
if running in managed mode.
We fix usage of kill server flag in the bitbake binary.
(Bitbake rev: 30159dbda3a40fa596302f91c705cb5f148c97a9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the capability to read the database settings for
Toaster from the environment. The DATABASE_URL is intepreted
and used to override the default settings.
This capability is essential for easy deployment of Toaster
in a managed hosted environment, and for creating
build environments with custom database settings.
(Bitbake rev: d16d19dafb83448fc214fce4fbdc2bcbf4bf9ce3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The registration of a remote UI event handler may fail
if the server cooker is currently in some certain states.
This may happen, for example, when a remote UI is started
very fast after the bitbake server is started, and the
server hadn't time to finish initial configuration parsing.
Rather than fail outright, we have the remote UI event retry
registration for five time at one-second intervals,
in the hope it will succeed.
(Bitbake rev: c3d520c92ae4ae80d31926a416456df510654b6a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we use the XMLRPC client API to connect to a bitbake server,
we want to receive errors from the API instead of having the
API exiting without warning.
Thus the "bb.fatal" calls have been replaced with "bb.warn" calls,
and we re-raise the original exception for handling by the
original caller.
The bitbake starting script has been modified to properly test
for failures in calling the client API and handle them.
Additional error handling added in the client, as to prevent
fatal crashes.
(Bitbake rev: eb63f08c33644f64752aaae2146a000956ce894a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration reading code should live in the
main bitbake entry point, and the server modules should
be supplied with correct configuration instead of attempting
to parse from configuration files.
This patch moves the endpoint address reading from XMLRPC
to the bitbake main script.
(Bitbake rev: ac5753274ff932e1d6f073ab4dab7bd6fe5355a1)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The big warning printed when people use -f is easily ignored/forgotten.
To raise user awareness, print a warning any time we include a tainted
stamp file into a build instead.
(Bitbake rev: 18f9bcbad059608e22fca20309314e1c399acec7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Checking for explicit exception names is bad, we also want to be able top
rely on inheritance. Fix these checks to be part of the real except clauses
so SkipPackage is recognised as being inherited from SkipRecipe.
(Bitbake rev: b131229145e1f2c372d6230a7b554e436c13c3f9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With new bitbake UIs having the cooker exit at 'random' points
in the codebase is problematic. This patch raises an exception
which matches the situation instead.
(Bitbake rev: 181a9735d02ebd517378558e909efc8b1b118973)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the depths of time we were rather confused about naming. bb files
are recipes, the event to skip parsing them should be SkipRecipe,
not SkipPackage. This changes bitbake to use the better name but
leaves the other around for now. We can therefore start removing
references to it from the metadata.
(Bitbake rev: 98d9e6e0f514a7cb7da1d99bf4bd5602b89426d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need BBHandledException events to be passed through to the higher
layers, they don't need addition of any traceback since they've already
been reported to the user.
(Bitbake rev: f63b61f8997862439519f474cc09f3e05e95288c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we see errors during parsing, firstly its bad to show a traceback
for an expansion error so lets suppress this.
Secondly, raise a BBHandledException instead of a SystemExit to show
we've informed the user about the condition (printing a traceback in the
default unknown case).
(Bitbake rev: e01988d9a1b7c40e31161c6ce7b85c4405671068)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an event handler triggers a SkipPackage event, we really want that
event to be received and processed by the higher code levels. Currently
it was getting caught and ignored which was leading to recipes
being present when they clearly shouldn't have been.
In general this exception catching looks to be doing the wrong thing. It
was introduced in
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/bitbake/lib/bb/event.py?id=37cb4cc02b2e2b6c338c5943747e0a1ef15176b3
but we likely want exceptions to pass through to the higher layers.
This patch therefore removes that code.
(Bitbake rev: 79211b3434855942f9fad4a1db69ce7be911327c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an ExpansionError occurs during better_exec() we should just raise it
instead of printing the traceback, so that recipe errors (such as broken
URLs in SRC_URI) are more easily comprehensible.
(Bitbake rev: 5b0da8932c318813138c113d2bb20498145dbd42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle the following situations in a URL (e.g. in SRC_URI):
* Trailing semicolon in a URL - this is now ignored.
* Parameter specified with no value (no equals sign). This still
produces an error, but at least it is MalformedUrl with a proper
message rather than "ValueError: need more than 1 value to unpack".
(Bitbake rev: bfd13dfbc4c9f1dd8315002271791b1d9e274989)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A fix for the former patch when checking out a repository with
username and password using HG
(Bitbake rev: 0e7b594ccbceb3149f38776cea204807031ef69f)
Signed-off-by: Volker Vogelhuber <v.vogelhuber@digitalendoscopy.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you try:
Y = ""
Y_remove = "X"
in OE-Core, bitbake will crash with a KeyError during expansion. The reason
is that no expansion of the empty value is attempted but removal from is it
and hence no varparse data is present for it in the expand_cache.
If the value is empty, there is nothing to remove so the best fix is simply
not to check for None but check it has any value.
Also add a test for this error so it doesn't get reintroduced.
(Bitbake rev: af3ce0fc0280e6642fa35de400f75fdbabf329b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace redundant foreign key lookups with "with" to improve all
recipes page load time. Do depends pre-lookup in the view class,
and use python itertation instead of filter() all to achieve x16
processing speedup.
[YOCTO #6137]
(Bitbake rev: a68a6dc50c11cc59e7c873414e3e22ac2644dea7)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Conflicts:
bitbake/lib/toaster/toastergui/views.py
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a sorted column is made invisible through the edit columns function,
resort the table the its default order.
[YOCTO 5919]
(Bitbake rev: 64618f7489eb9eb13a97d03cd2d353384f5faa70)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure there is default command available if FETCHCMD_p4 isn't set.
Also clean up the getVar references whilst here.
(Bitbake rev: d150226d11d5f041f78c8c3ce4abc5465dbc81d8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file inheritance logging has been here since the dawn of time. It
duplicates output many times over and logs to debug level 2. When running
with the debug option, its understandable the user may want to see the
paths of files included in the build.
These changes remove pointless/duplicate output and print the
include paths clearly at debug level one in a form which
users should be able to more easily parse.
(Bitbake rev: 633a56987df639295fe9128418da5634050063e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a user runs with the -v or -D options, its understandable they'd
expect to see log output from the workers yet right now a bug in the
log handling does not show this.
Fix the conditional to ensure such log output is shown on the terminal
when it has been requested. Ideally this data should always flow to
the logfiles but that is for another patch.
This also fixes the code to do what was always intended in the comments,
i.e. if the user specifies -D or -v, output is shown from the tasks,
otherwise notes are suppressed.
(Bitbake rev: 20a3c93d8572969e76563f29bff89400b93ffae7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was reported that bitbake -D made no mention of which append files it
was using. bitbake -DD does but it makes sense to increase the log level
of this piece of debug information.
[YOCTO #6262]
(Bitbake rev: 5824bf9c6feea05567d155911f4ab2e371911d34)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch modifies the data type constraints for the SQL
fields.
The original constraints have been based on guess worked, and
they weren't strictly enforced for sqlite. On MySQL, the
constraints are strictly enforced, and need to match the real
data that we have.
After measuring data on sample builds, the new constraints
have been validated to work with MySQL, and this patch updates
the database schema with the new field types / constraints.
(Bitbake rev: aaefbc0b4e7484d6f4854ce49602821a6e4adc4b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a patch that fixes the 0004, 0005 migrations of the toaster
model to get them to properly work with MySQL.
These migrations had a conflict around Build.timespent field.
The sqlite3 constraits were not enough to detect the conflict, and
the migrations worked as expected.
MySQL objected to adding the field twice, so I did regenerate
the migrations with the correct model listing. The net effect
is the same, so the migrations work the same, but now we
can use these two migration on the MySQL and other more advanced
SQL engines.
(Bitbake rev: 29afc29154b948d270ce52978a1eed4cd8887f92)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 6147]
Fix bug in views.py that put 'span2' class id in a 'clclass' key
instead of the 'dclass' key. This fix exposed another problem in
target.html and the target view function that used 'package_size'
instead of 'size' as the 'clclass' which is inconsistent with the
model field name, causing table data columns to be shown when
the header is hidden.
(Bitbake rev: 436865ac8520c1d75401dde7df373dba9a386c9d)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the recipe details and package details pages, the layer branch
definition list elements should only show when the branch field in
the database is populated. If the branch field is empty, we don't
show them.
The patch also removes all unnecessary data-toggle and
data-original-title attributes.
[YP #6152]
(Bitbake rev: 72adcadb931519f803dad7488544767241561fb7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sort the 'outcome' and 'sstate_result' columns by their
description string values and not their numerical values.
[YOCTO #5921]
(Bitbake rev: eee0abe70e4d85a0753f0b122518d7a9f06181bc)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 42b7be1a6c5ff559f4a213eed04b370ca955460d)
Signed-off-by: Nick Lewis <nick.lewis@usa.g4s.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately we've been neglecting to pay the correct tributes to the
cookie monster and hence the datastore is malfunctioning.
Currently tributes are only paid on the last part of a variable after
the last "_" character. We need to split by *all* "_" characters since
an override may contain the character.
This fixes the code so the correct number of tributes are made. Paradoxically
parsing appears to be faster after this change.
(Bitbake rev: d1c712fd3a59fa804e6fd451612c30487671f3a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the power were to fail, it doesn't matter to us much if the data
makes it to disk or not, we'd have other problems. However an fsync()
call on a multi build autobuilder is painful so lets avoid them.
(Bitbake rev: 4eb2dc8048e2722d64d589f453df1ce6262c71b8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the power were to fail, it doesn't matter to us much if the data
makes it to disk or not, we'd have other problems. However an fsync()
call on a multi build autobuilder is painful so lets avoid them.
This is particularly true in this case if a timeout causes a reconnect
during a build.
(Bitbake rev: ec28256ac2a30f047585e8f61200d764bc295ded)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you do localdata.getVar, the code parser simply ignores
the references. Change the code to use endswith() to catch more of the
references. These names are probably unique enough to get away with this.
Bump the cache version to ensure things get updated.
(Bitbake rev: cf763cddc3faa2361b4c4dbd08419e4ebabf208f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This includes contains_any in the special handling code for sstate. It
does not take into account the equivalence of the values. In current
code, considering 'bb.utils.contains_any("A", "foo bar", ...)':
A = "foo"
A = "bar"
A = "foo bar"
All those will get different signatures.
(Bitbake rev: d1e3345d715e488ec3f5515fb0e1fb39366346bc)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Doing so was causing leakage between the execs of the main value and that of
the subshell value, and was causing the cached subshell value to be used for
the overall variable. At the least this could cause execs contamination
between two variables that while differing, run the same subshell. Beyond
that, it's possible we could have been using an incomplete cached value of
a subshell for that of the main value.
Before this, bb_codeparser.dat would change between parses with differing
bbfile parse order. After, it does not change.
The codeparser cache version is bumped, to ensure we don't use potentially
incorrect cached values from previous runs.
This should hopefully resolve the difficult-to-reproduce issues we've seen at
Mentor Graphics where bitbake emits a script to run a task and misses
dependent functions, resulting in 'command not found' failures. This issue has
also been mentioned on the oe devel list, where someone hit a case where
oe_runmake was missing from a do_install task (IIRC). Adding debug information
showed that bitbake's information about the variable dependencies for this
task is inaccurate in the failure cases.
(Bitbake rev: 97537e4786a1e3a329249497498b59b8f5174fc3)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial version of this patch was reverted in
0a94e568152de550dedc8135a766beb18bf064ab
However, it was later agreed upon that it was reverted due to
a misunderstanding during code review; the patch is ok.
This version of the patch also removes an unneeded initialization of
the 'checksum' variable outside the scopes it is being used in.
(Bitbake rev: 9ee19a3ca2f8e11a91f0289ea3486310c61d40f2)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Following up a previous patch for mercurial fetcher, I just fixed a
problem when calling update on a repository with subrepositories enabled.
Attached a patch that fixes this problem
>From caae519a2bd64bf7c729bb26aff344827def47fb Mon Sep 17 00:00:00 2001
From: Volker Vogelhuber <v.vogelhuber@digitalendoscopy.de>
Date: Tue, 29 Apr 2014 15:29:47 +0200
Subject: [PATCH] bitbake: - fixed authentication issues in case of using sub
repositories
(Bitbake rev: dfa041c940caad12da50126a559afc8de089eeda)
Signed-off-by: Volker Vogelhuber <v.vogelhuber@digitalendoscopy.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 6dfb33fd7204e09815bde7ba5bf21941a73fe965.
It causes an unindeded change in behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the fix done in f9416e76e272ba3249abff099f6f3a47fe82e03e.
Instead of adding continue statements we can just move the last
statements into the final else-clause.
(Bitbake rev: 6dfb33fd7204e09815bde7ba5bf21941a73fe965)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only ever clone other repositories, if there were a problem such as power
failure, we'd blow away data and rebuild. As such we don't need fsync(). With
filesystems like ext*, the fsync pushes nearly all the data out to disk
which impacts all running processes.
We therefore set a configuration parameter to disable the fsync() calls.
Also fixup a case where basecmd wasn't being used for no good reason.
(Bitbake rev: 0a26abaf3a1e34d556c9375068dd17c879568d0f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The optimisation where only the data we're interested in was finalised
was good but it turns out we can do better. In the case where a
class-extension is to be targeted, we can skip the other targets.
This change does that and speeds up parsing at the bitbake-worker
execution time. Specifically, you can see an improvement in the speed
of bitbake X -n.
(Bitbake rev: b56918c7ef7913e84356c69ee9b269844a446728)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dry run mode, stamps for noexec tasks are being written out which
is incorrect. Avoid this.
(Bitbake rev: aa6448a0552ba2947ac262b8b5314a593d1058d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When looking at a list of tasks, do_patch and do_unpack were being
given equal priority when one clearly depends on another. The
reason for this was the default task weights of 0 being to tasks.
This is therefore changed to 1 to allow correct weighting of dependencies
which means the scheduler has better information available to it about
tasks.
Weight endpoints differently (10) for clearer debugging of priorities.
(Bitbake rev: 12dc1d17fac3e8ec420fcafb06186d32fd847d89)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The zero priority task should be run first but was being confused with
the None value the priority field defaulted to. Check for None
explicitly to avoid this error.
In the real world this doesn't change much but it confused the debug
output from the schedulers.
(Bitbake rev: 49c9d8c9400f74c804c2f36462639236e0841ff0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Somehow the counter was set to count tasks with outcome
'not available', instead of outcome 'empty'. This patch
fixes the problem.
[YOCTO #6146]
(Bitbake rev: 1cc2a299c842185ba14074817d5cd2925275610b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The total number of tasks in the build dashboard was counting
_setscene tasks, which are not exposed by Toaster as separate
tasks. This patch makes sure that _setscene tasks are not
counted when calculating that number.
[YOCTO #6145]
(Bitbake rev: f8817c060042147a173d3451121304b25ffc4b6c)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we now get wildcards in the file checksum list in the cache, we
need to ignore them when checking to see if they still exist. This
fixes connman-gnome reparsing on every bitbake execution in OE-Core.
(Bitbake rev: 340c250fc664414ab2715a454bedbd19e8efe103)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch allows toaster to start without pytz.
Django can work with or without pytz, but in the
time zone fix I mistakenly added a hard dependency
on this module.
This patch eliminates the hard dependency.
(Bitbake rev: 40027a6e093c3b7480bfaccbd57e0e613d9a7b71)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display the URI paths from SSTATE_DIR and SSTATE_MIRRORS
in the Task page.
[YOCTO #5996]
(Bitbake rev: 6d07b531736c2b304da2dfe661239fd3612b0541)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 5778]
Implements the features described in the attachment to bugzilla 5778
- new global changes to the format of size data, and
- adding sorts by selected columns to specific detail pages.
Although new pagination and row search capabilities are shown on the
screen shots for the 5778 attachment, those features are specified in
a different bugzilla entry 5777 and are not implemented in this commit.
Also, the 5778 spec includes table sorting for the recipe package
detail page, but sorting for that page was not implemented in this
commit due to complications with sorting then returning to a page that
is only one URL fragment in a template.
The scope of file changes are described below.
Changes to support new 'size' field column formats...
default.css - added sizecol class style (right justified)
projecttags.py - changed filtered_filesizeformat to allow
".0" suffixes
Changes that add class 'sizecol, span2(as spec'd) ' to <th> and/or
<td> size columns were made to...
dirinfo.py,
package_built_dependencies.html,
package_included_dependencies.html,
recipe.html,
bpackage.html, and
target.html
More significant changes to support detail page table sorting
are:
- tablesort.html: New created to implement the sort icons,
directions, and table headings, and
suppress sort handling if 'disable_sort' in context,
without search or pagination elements ingrained
in basetable_top. Confining the changes to this small file
reduces the impact (testing and risk) on the larger set of
files that arleady include basetable_top/bottom files.
- view.py: Modified the following view functions with
- trivial changes for size formatting to the views: target,
- changes to package_built_detail, package_included_detail,
package_included_reverse_dependencies to handle the sorting
implementation as well as moving headings and size
formatting for size columns from templates to the views.
- Implementation of the detail sorting using above in:
package_built_detail.html,
package_included_detail.html, and
package_included_reverse_dependencies.html
to include the tablesort heading setup, format the size column,
and iterate over the new sorted objects, suppressing sorts if
table row count less than 2.
(Bitbake rev: d16126e9abfffde66ab70865a81997322847d44e)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hide the incomplete tasks, those without order numbers and/or outcomes.
[YOCTO #6060]
(Bitbake rev: bdbba81715765681a0404fa82f28e471b241051a)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The combination of a regex filter specification that uses alternate,
plus a search string, plus multiple search_allowed_fields, leads to
a Django fatal error. Replace this regex filter for variables in
local files with a simpler 'contains' against the project's directory
plus a '/conf/' string.
Alex rebased this on top of fix for #6048.
[YOCTO #5962]
(Bitbake rev: fd57128dc3a35ca87031f3df1a531a085e89baf0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a fix for using multiple expressions in filters.
Three different issues are touched:
* added an explicit error message for incorrect filter usage
* changed the value separator to something that will pass
through from the browser to the actual code
* changed the "and" operator for combining Q from a dubios
lambda function to the standard operator.and_
(Bitbake rev: 845b081fc108c656f04d4a70afa4695defc13c9f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch will make Toaster remember the selected
number of rows to be displayed in tables across different
searches.
The number of rows setting will not be remembered if the
the user leaves the page and subsequently returns to it.
(Bitbake rev: a84f296591be26972b808e98816e9d92cadf3eb5)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When listing the set-in files in the configure varaible table, only show
each file once in that summary view.
[YOCTO #6048]
(Bitbake rev: e69a57fc3302ed8fac21631ba95ea66e93b243e5)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 6061]
Disable size-over-total table column sorts in the image installed
packages view because that field is a computed field and only model
fields are sortable in the current table toaster implementation.
(Bitbake rev: ba6937c9bffcf81f71ef6fa9f0d29fbbd6e17b2d)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes sure that we only load pytz-recognized
timezones. Pytz is used to transform the timezone information
for the database queries, and needs to be able to deal with
the TIME_ZONE value that we set up.
[YOCTO #6093]
(Bitbake rev: bfe67472e3ee778b78ef004b2153fa88b3807b92)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some explicit tests for unpacking local files to the appropriate
location. Some of these tests are actually testing for broken behaviour;
these have been called out in the comments, and associated bugs have
been filed.
(Bitbake rev: ca921c773c52392a5a338b2f493ad38c8132f708)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the recent change to split the log output to stdout and stderr,
error messages that appeared while the footer was printed got all
messed up. This was because the messages to stderr was output _after_
the footer, then clearFooter() tried to remove the footer but removed
the error message and parts of the footer.
(Bitbake rev: 4fafea4fa69542b491e84463f6eae0d5bf645673)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is a directory matching a wildcard in SRC_URI when getting file
checksums, we should recurse into that instead of producing an error.
(Bitbake rev: ae87b7eb414e3d5eefd2effec7b30c22d2186b02)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Local fetcher's localpath is returning the parent directory for a
wildcard match; we need to handle this and add the wildcard
specification so that we checksum the correct files.
Fixes [YOCTO #6127].
(Bitbake rev: 4a90edd62c16cbf41b5b93280e155077564c774a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path for "recipes/images/" was not added in BBFILES when Hob had
to search for an image recipe. Therefore, it could not find it and an
error occurred.
This path needs to be added when Hob is launched.
[HOB #6086]
(Bitbake rev: 35c67281775b08925957c32663d587d486944e0e)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>