Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
(From OE-Core rev: 019a95a5e01bd3fefaaab0a27029ed8b26ee3c79)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext 0.16.1 is a GPLv2 version of gettext. Making that extend native and
nativesdk makes sure we use the same version of gettext for compiling internally
as well as in our toolchain.
(From OE-Core rev: 6322a1b3680d2480c96433fde5a913b3bf2d09ea)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existence of a /etc/hostname file causes any hostname provided on
the kernel command line or via dhcp to be overwritten by the
initscripts 'init.d/hostname.sh'. This change allows you to set a
value of "" for 'hostname' which will skip the creation of the
/etc/hostname file by the base-files package.
(From OE-Core rev: 5fd3503d4a438d126f44fe8118e9ea465e7699c2)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will let eglibc use kernel like option
management through kconfig
(From OE-Core rev: 4282b86072fd5a916d0d12082d6ba575bce691f2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are needed to support upgrading from task-* to packagegroup-*
within existing target images at runtime.
Note: these settings will very likely be moved to a separate inc file
at some point in the future.
(From OE-Core rev: 1b07bd4c6b1ff70267b97f94b25026a8f8ad3314)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are needed to support upgrading from task-* to packagegroup-*
within existing target images at runtime.
Note: these settings will very likely be moved out to a separate inc
file at some point in the future.
(From OE-Core rev: 5dd4de086d744c81d2275077ad0e0022204b0a68)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Original recipe added by RP in fc128ab1e4
was saying GPL (later GPLv2)
* COPYING.GPL was added to reflect that
* Meta-oe has similar recipe with MIT license and even more scripts, so lets
change LICENSE here too
* Most code was derived from the meta-oe version or added to OE arguably
under MIT and the MIT license makes most sense here
(From OE-Core rev: 54a4a0b42d4515260841229d69f9cc43485bcb78)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Move parts of local.rules from udev to udev-extraconf
* Move mount.sh and network.sh to udev-extraconf along with rule fragments
* Add mount.blacklist to CONFFILES
* Change PV to 1.0 and bump PR to provide upgrade path from meta-oe's udev-extra-rules
including RREPLACE/RPROVIDES/RCONFLICTS trio
(From OE-Core rev: 0ca3a7823e97c4e4af6e89d852f98d29ed6193d7)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow references to the old task packages to continue to work. This does
not add RPROVIDES for everything, just those packages that are likely to
have been referred to.
(From OE-Core rev: b41c45972a6d359f034615471959c84aee2bc456)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides one package group, packagegroup-core-apps-console, which
is usually brought in by adding "apps-console-core" to IMAGE_FEATURES.
Aside from the naming inconsistencies, this is a group of mostly
unrelated packages, none of which are actually "apps". Handling each
one:
* dbus: should mostly be brought in by package runtime dependencies
* avahi-daemon: if you are using packagegroup-base (as all images that
inherit from core-image do) this is brought in by having "zeroconf" in
DISTRO_FEATURES.
* portmap: not very useful by itself; should be brought in by selecting
NFS server/client through other means.
* psplash (or whatever SPLASH is set to): this has been changed to be
an explicit item "splash" in IMAGE_FEATURES. Since this is a fairly
fundamental feature, a piece of code has been added to automatically
handle this for images still using apps-console-core (and show a
warning).
(From OE-Core rev: 592d6e602466628d10704835a7b07d3d713f58e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since package groups don't actually fetch or distribute anything and we
no longer run do_configure we don't need to set this variable anymore.
(From OE-Core rev: 4c511f77e38cbc9d8d633fef3b1ab4cf93440258)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
openswan was only ever provided in unmaintained form in meta-demoapps
which has been removed, so we never really provided it in OE-Core.
(From OE-Core rev: 660fa4f58805a54bcb0ea0b218779e0abcf3fd65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the Sato pieces have been moved out, rebase packagegroup-core-x11 on
packagegroup-x11-mini but using the structure/contents of meta-oe's
task-x11 so that it can replace that; rename packagegroup-core-x11-mini
to packagegroup-core-x11-base and pull in the xserver/utils packages via
packagegroup-core-x11, and move both of these recipes under
recipes-graphics.
x11-mini is renamed to x11-base as it's what people should build on top
of and since x11-mini is newer, the corresponding IMAGE_FEATURES item is
less likely to be used in existing user recipes.
(From OE-Core rev: 0cc9ced7d96b960994b0671095bc74becfc55e2c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename to better reflects its purpose, and move under recipes-graphics.
(From OE-Core rev: 9e3b208cce1a673619d82b672c7b83e6e80215cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move Sato applications to packagegroup-core-x11-sato.
Note that this eliminates both the apps-x11-core and apps-x11-games
IMAGE_FEATURES; in practice it is unlikely these were useful to anyone
outside of the Sato images however.
(From OE-Core rev: 46cc375f29d5ecac7311613514a474f288d7c781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also clean out items already handled by that class (dev/dbg packages,
ALLOW_EMPTY, etc.)
(From OE-Core rev: 65fca4458cfe1d647c7ea1d4588dc449739a73eb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm not convinced everyone who wants to serve NFS needs rpcinfo, nor is
it clear that rpcinfo is actually provided as part of eglibc-utils
anymore, so let's just remove this.
(From OE-Core rev: 9ddc11b8921dbdca237f9cb511faa79a4a073515)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Bootloader selection (u-boot, redboot, etc.) is not handled using
feature selection anymore, so remove these packages
* Realistically there are no packages we can always know that need to
be installed for a screen/touchscreen these days, so remove these
* Similarly, all RAID configurations can't be supported just using
one package or list of packages, so remove the raid package.
* Remove default settings of MACHINE_ESSENTIAL_*, these variables
aren't referred to in this recipe.
* Remove some outdated comments
* Fix indenting
(From OE-Core rev: 2abf70dc1f43a245d56ef85950be17db1ff32c06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This indirection does not add anything in terms of configuration and
only serves to increase confusion; and given the nature of these it is
unlikely they are being used outside of OE-Core. Change the sato-sdk and
sato-dev images to be based on the main Sato image (avoiding the need
for a common SATO_IMAGE_FEATURES variable) and eliminate all references
to them.
Fixes [YOCTO #2458].
(From OE-Core rev: 6488842b0d03cfec9f8675eca5a2e05675decf66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /usr/include/rpcsvc/rquota* files are provided by both eglibc
and the quota package. Quota's version is newer and a superset of
eglibc's
[YOCTO #238]
(From OE-Core rev: a155eee07dc8eb369ae897b702a14826e370bf5a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mount.h sync with glibc is needed to get new defines
which are needed for some packages like systemd
(From OE-Core rev: ce4d7f4376aac2a2df1a05884d7946ee469d63c1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Erroneous paths being added to gettext by libtool were fixed, but the
fix in libtool did not trigger a recompile of gettext, so if you are
already in the situation where you are receiving the QA error, you are
stuck. Bump PR to force a recompile.
(From OE-Core rev: f9659be1eb65b36192af8e59c683be118b0e2f8d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matches changes made to the e2fsprogs PACKAGE list
(From OE-Core rev: d9443c235e2282d6911ddfe422fe196cb998bbe3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GLib will use "minimal" debugging on non-development builds and the extra safety
net and ability to debug at all is totally worth the small performance cost.
If someone has a need for every ounce of performance, a simple .bbappend can
restore this option.
(From OE-Core rev: 4337545ea05ec9d9f64244bb6be83fab329478d1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our bluez4 recipe provides hid2hci now. udev removes this as of version 169,
we might as well remove it now to stop conflicts over the file in both
target file systems and the build sysroots.
(From OE-Core rev: 1b5aa7ce6ef22c015e0ab8463ba528f916c421b0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The S variable is now the default one.
(From OE-Core rev: a8b1081791af60873c6fd26cbf298cfe1886f97d)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds the vmx* files needed to setup a VMware image,
this also packages the vmdk along with the vmx files.
(From OE-Core rev: 968cfc0b630fb409430a46b1512d6bf0de225ad1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed because ipk tools and variables (specically
IPKGCONF_TARGET and IPKGCONF_SDK) are used from the rootfs_ipk.bbclass
I tried to inherit directly but it still fails to expand those.
[YOCTO #2814]
(From OE-Core rev: 161043782682cccd2efc2b349e8248ae084857c7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the machine and distro both want alsa, then have task-base-bluetooth pull
in the libasound-module-bluez package.
(From OE-Core rev: 4d7b8da48a1df57bf8e08eff368564f7b47a5222)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc 2.15 is not buildable with current toolchain build sequence
and is not used as default on OE-Core. So lets remove it.
(From OE-Core rev: d8c47eeb09d1bc2a6a7a335cc94658f6bdfe4026)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not build fake shared libraries during uclibc-initial phase
Let uclibc depend on gcc-cross-initial instead of gcc-cross-intermediate
thereby set stage to remove gcc-cross-intermediate
Let uclibc depend on uclibc-initial so that boostrap sysroot
gets populated properly
(From OE-Core rev: b954c2d7cd978adc059d672425c197eaaf57e852)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc-initial does not need to install fake shared libs
anymore so drop it.
eglibc now should depend on eglibc-initial so that bootstrap
sysroot gets populated properly.
Drop references to gcc intermediate from glibc testing
scripts.
(From OE-Core rev: bddc141e7cec18744902787ab53c21bf28e71f78)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch backports two patches from glibc trunk essentially
dropping the requirements to have libgcc_s and libgcc_eh
this will simplify the toolchain bootstrap sequence.
(From OE-Core rev: 9591c93c20af236fdc1a99b548435b6df75af497)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the issue that coreutils was built without acl support:
configure: WARNING: libacl development library was not found or not usable.
configure: WARNING: GNU coreutils will be built without ACL support.
which will cause ls and cp commands don't have the ACL related behaviors:
ls -l: no plus sign(+) after the permission string for files that have ACL
cp -p: can not preserves the ACLs.
[YOCTO #2959]
(From OE-Core rev: b30ef39cc26dd0b6ed08bd2b1a6394de6b540720)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We package this separately to be able to pull this in only if this makes
sense for the MACHINE.
(From OE-Core rev: b97e37e1444ef32e7837dcc79e3fad36c4284b65)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For machines with no hardware clock it makes no sense to have this
init stript. Moreover, we avoid a boot error in this way.
(From OE-Core rev: 199259b8d87ee86038de355dd6caeb489d6473f0)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext-0.18 gets a new option for acl, but we do not place acl
into DEPENDS.
So, explicitly disable acl for deterministic builds.
(From OE-Core rev: 96f5ea19f2b8ba396f92377b93a763af7b6109b6)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PIDFILE (/var/run/dbus/pid) referenced by /etc/init.d/dbus-1 did
not match the path (/var/run/messagebus.pid) configured in
/etc/dbus-1/system.conf, so the initscript could start the daemon, but
not stop it. Also remove needless directory ownership logic
(dbus-daemon drops its pid file as root before calling setuid).
(From OE-Core rev: 23cfbff5611c2ed52eedfaa99b1d6eccd326f035)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the warning form pcmciautils building:
"WARNING: QA Issue: pcmciautils: /sbin/pccardctl, installed in the
base_prefix, requires a shared library under exec_prefix (/usr):
libsysfs.so.2 => /usr/lib/libsysfs.so.2"
Just refer to Debian/Ubuntu distributions, install sysfsutils libs
to "/lib*" instead of "/usr/lib*".
[YOCTO #2907]
(From OE-Core rev: f3c93627d4f603f9e4c4491d89eb988aa6241662)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update to the latest version of psplash which fixes a segmentation fault
bug
(From OE-Core rev: 662637decc23888c9b0da93807257943bab14583)
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when we build for nativesdk it needs tools from installed
glib-2.0-dev package. We zeroes out compile_resourses but
then genmarshal came up so instead of going about disabling
them one by one lets depend on glib-2.0-native since
thats the right thing to do.
(From OE-Core rev: 5416bf849ceefb49f06bedfa5e67595e9c68582a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2896]
The du-k-works test seems to assume that du -k on a directory with two files
totaling 80 kilobytes should report either 80k or 88k. In ext4 filesystm however,
both busybox' du -k and coreutils' du -k reports a size of 84k which causes the
test to fail.
Intergrate the patch from:
http://git.busybox.net/busybox/commit/?id=a5ee090e8651692545514a81a16c6cde3a2dc577
(From OE-Core rev: a022fb6b69388f28f3130e71125b64e4c154d504)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udhcpc is invoked from the networking service, so it shouldn't exist
standalone. If /etc/init.d/busybox-udhcpc is present, it will cause
udhcpc to be started two times.
And since the script doesn't support the stop action, it will cause
udhcpc to be started even when system is being shutdown.
Remove /etc/init.d/busybox-udhcpc to resolve the issues.
[YOCTO #2840]
(From OE-Core rev: 8329c4679ec0ce319d2a81d755a0da5b05474688)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dbus-x11 should not RPROVIDE dbus-x11 as this is incorrect and confuses
builds. This fixes the nativesdk case.
(From OE-Core rev: 09e3ebdb77c090ddc45fed7c6acc1591cd4b3595)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifying the dynamic loader path in all binaries by the SDK installer
would not be possible because we cannot know in advance the SDK target
location. Hence, the PT_INTERP section size has been set to 4096 (which
is the maximum path lengh in Linux).
Also, for the dynamic loader SYSDIRS and ld.so.cache paths, special
4096 bytes sections were allocated so that we can easily parse the ELF
binary at install time and modify the paths.
(From OE-Core rev: 6be55d36333e0c81a4926332d036246d28d995c4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Followed suggestions from Bugz 2261:
2) make the virtual/libx11 DEPENDS conditional based on the x11 distro feature.
This makes the build dependencies reflect the feature list.
3) remove dbus-x11, meaning that dbus-launch with its potential X11 dependency
is now back in dbus where is belongs.
4) make dbus provide dbus-x11, for compatibility.
Fixes [Yocto #2261]
(From OE-Core rev: c02364f36e228835ea5d7fd4e1d347fd451f8544)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you have a distro which has older version of
glib-2.0 installed then it does not have compile_resources
installed which essentially glib-2.0 nativesdk is
looking for on build host. So like in a cross build
we disable the configure check which will force it
to build an internal copy and use it.
This problem may not be seen on newer distros like
ubuntu 12.04 since they have newer version of glib-2.0
installed
(From OE-Core rev: 69bd94173294c1ae2cf5e300ada7116e99a5b0c7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for the older kernel perf tools to build correctly, as
noted in the patch new perf tools have sys/resource.h included directly.
(From OE-Core rev: 21a57b98ff5091a5563c00093081297a6c586208)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some bash macros are missing from acinclude.m4 which are added up-stream. This
wasn't actually breaking anything but but it was causing the configure script
to not run all the tests it's intended to run.
move the acinclude.m4 from "files" folder to version specific folders so that
readline-5.2 continue to use the older acinclude.m4 only readline-6.2 use the
updated one
(From OE-Core rev: a706a74bb28e8f4d97e32f45ea894627d7e8f3fa)
Signed-off-by: Fahad Usman <fahad_usman@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2788]
The system will be hung when udhcpc starts, if nfs is mounted
at "/" directory and default route is different after starting
udhcpc.
The cause is that root_is_nfs() does not work after kernel-2.6.37,
since the device name has been changed from /dev/root to
${IPADDR}:${NFSDIR} on /proc/mounts. which leads to remove
the default routes to nfs server,
Now we use a loose match to check if rootfs is nfs.
(From OE-Core rev: 9921cb0104ea36daf909c110bb6767e5fd307da0)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patch mkfs.minix.tests to have correct md5sum on big endian platform.
(From OE-Core rev: b37e1ea5f29d03efbe136ee7f4fa261a1936ac8f)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky-tiny disables certain eglibc options which gives good excercise
for eglibc's componentized builds. This patch essentially updates the
GLRO patch to account for additions of GLRO(dl_debug_mask) and
converts them to GLRO_dl_debug_mask
Secondly adds a new patch where it was creating a undefined alias
because we were using INTUSE macro which got exposed when we
disable OPTION_POSIX_WIDE_CHAR_DEVICE_IO
(From OE-Core rev: f7a3121c0e4524f33f312f37d6a0bc952b219780)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have had these things in place to overcome a limitation
from our gcc-initial-cross not staging a self sufficient
limits.h. Now thats fixed we do reset TOOLCHAIN_OPTIONS
to point to sysroot where linux kernel headers are staged
and not the bootstrap sysroot which will infact be popuated
by eglibc-initial itself.
Secondly we dont need to set CPPFLAGS specially as we
are doing that in eglibc.inc so we override that
(From OE-Core rev: 3045ab9b3efc887700a922d06a6f5f4069a41356)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe is imported from meta-oe its a requirement for
systemd to work. Now that systemd is living in a layer of
its own. Lets have this recipe into core metadata
(From OE-Core rev: 6ef8e6f2f9b0583fa0881e0dfc52462405b21ede)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a directory needs to be created to create something else in volatiles,
there's no guarantees on ordering due to the backgrounding. We can't guarantee
with certainty that the create directory commands are complete before the
later ones run. This ensures that we wait for directory creations to complete
before we proceed.
Chris Hallinan hit an actual failure due to this back in March of last year.
(From OE-Core rev: 138c3c26830e48a56ca7cb3e5feca324d13ec89c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: fae8b8e3f172a7523c0d5cc416031f3d571b9f81)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1919]
Create a basic EFI installer script modeled after the existing installer
and add it to a new initramfs-live-install-efi recipe. Update the
init-live.sh script to distinguish between LABEL=install and
LABEL=install-efi and select the appropriate script. Add the efi
installer to core-image-minimal-initramfs.
Update grub-efi.bbclass to use "LABEL=install-efi" when it detects a
label of "install". This is clearly not ideal, but a proper fix would
involve decoupling the LABELS assignment from the image-live.bbclass
usage of SYSLINUX_LABELS. We should be able to address that in a
follow-on clean-up series.
V2: Include missing initramfs-live-install-efi_1.0.bb
V3: Rebase after Radu's console_params fix
(From OE-Core rev: 4bce3417917a3e88ba6529db394525fba82e0699)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox wget testing fails
In cases where busybox wget is invoked with -P <...> and the url ends
in "/", the download directory is ignored (ie the file index.html is
implied), this change enables the -P option for those urls.
(From OE-Core rev: 95fd02de0aee0a1907b51f9ccda260d483e6e292)
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dbus-glib.inc: default turn off unit test as libdbus-glib-1.so.2.2.2 will
have unit test code if DBUS_BUILD_TESTS enabled. User can turn it on with
PACKAGECONFIG_pn-dbus-glib = "tests" in local.conf or
PACKAGECONFIG ??= "tests" in recipe itself.
test-install-makefile.patch: install unit tests for test purpose
Add tests and tests-dbg package.
(From OE-Core rev: 9acc464905f8106c2828e1b7bb6ce9f9be810302)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
test-service-glib-include-glib-only.patch: fixes the compiling failure
that test-service-glib.c includes glib/gquark.h not glib.h directly.
[YOCTO #2762]
(From OE-Core rev: aefa55f3553f00753d1eb95905086bc12bc5bfaa)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Live image installer did not preserve BSP specified console= kernel parameter.
This patch updates the init scripts that are responsible for grub.cfg creation
so that options like console= are passed allong from installer to installed img
[YOCTO #2426]
(From OE-Core rev: e18c59eb5a61f265b9cad6de68359fa1430b0e58)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both eglibc-locale and eglibc were installing locale files into the sysroot.
Whilst this is in general harmless, its a waste of diskspace/time so this
moves the responsibility to the eglibc-locale package.
No PR bump this this is really a cleanup and doesn't affect build output,
the sstate size reduction will happen next time it is rebuilt.
(From OE-Core rev: e9bf694b635baab9238088fbeb5d2d67e9190ccd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many recipes are now having to define PERLPATH and PYTHONPATH variables.
Creating USRBINPATH in bitbake.conf means we can remove all these lines
from the many recipes now needing this and simplify the code changes
needed in each case, reducing the chance of errors being introduced.
Also fixup glib python binary location issue and fix function indentation.
(From OE-Core rev: cf63d9068c3a8c635dfc240d30dfff278be9b0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
e500 support needed to be updared to match eglibc 2.16
(From OE-Core rev: ae9748c614dc8e56cde3de2401c922607ed97620)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2761]
This patch fixed the issue that after "bitbake meta-ide-support" and try to start qemu and it will fail. This is due to the meta-ide-support lacking dependency for qemu native and ended up using qemu under /usr/bin. Fix the issue by adding dependency for qemu native in meta-ide-support and also add the path info in the environment-setup script.
(From OE-Core rev: 3ea597249c18d73417abe7d7a9d32bba00499914)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this resolution allows to use one single logo
(From OE-Core rev: a6471990e9d9cd71ca797dddf0db1e52eaa9a935)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This prevents kexec from building for this part since it does not work
(From OE-Core rev: c7beda1b779ce189c614fcce13e9ccf2c1b4ca6c)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mount.sh mounts all partitions with -o sync, which is bad for system
performance.
(From OE-Core rev: d49cf73754150b50a911d326aaa666f5da78855c)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bring back earlier jpeg fix. upstream has removed the fix from earlier release.
The support for automatic de-ANSI-fication has been deprecated in
automake 1.11.2, and will be removed altogether in automake 1.12
This avoids this error:
| configure.ac:24: automatic de-ANSI-fication support is deprecated
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
NOTE: package jpeg-native-8c-r2: task do_configure: Failed
(From OE-Core rev: 893ce9db79a5c4cca8a6b6ed6a9cec81777aba2f)
(From OE-Core rev: 626676ba039bc5d9427665a52cbe40a202a542c8)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the patches that were either applied
or fixed differenly in 2.16
Add patches to fix ppc spe patches to match
eglibc 2.16
Fix CPPFLAGS to contain correct includepaths
so autoconf cache is generated correctly
(From OE-Core rev: 705fe4dab44e623350fc32efece87a977d53bfc4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes use gnulib which needs this change to use gets
when its defined and not otherwise. Until that change goes into
gnulib and then all these package upgrade gnulib in their sourcebase
we patch them
(From OE-Core rev: 3148460575b65cb681065e5850b8afb96056d712)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include sys/resource.h to get definition of
PRIO_PROCESS
(From OE-Core rev: 6b74c8edac0a4a468741ab7cc4ecef74314d2043)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc 2.16 has removed gets so we account for that
(From OE-Core rev: 84183aee7e6f81919ec44f3043c7d9feea01f202)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* 2.32.4 has completion files in ${datadir}/bash-completion
and dbus also packages bash-competion files in separate package
(From OE-Core rev: b070eb22372ad1ef5b21162d832772e560184cf8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's bugfix release, see http://ftp.gnome.org/pub/gnome/sources/glib/2.32/glib-2.32.4.news
for list of fixed bugs
(From OE-Core rev: 85a930188300152bc9a1bbf640a2441f3177e26f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if
you need to check for the presence of the serial consoles you can also define
SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This
will prevent error message that pop up when the serial port is not present.
SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS1 115200;ttyEHV0"
SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
The above lines in machine.conf or elsewhere will have the effect of having
two serial consoles and removing any that are not present at boot
(From OE-Core rev: eecd65f188ba2c924626b7e1bf5c8e2eb51e9b59)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake looks at all include statements, even if they're not used. To make
builds deterministic and avoid needing to add binutils as a dependency
for libzypp, completely remove the include from the header file, even if
it is never used.
This avoids issues where you'd build binutils, then libzypp, then remove
binutils (and hence ansidecl.h) and then recompile libzypp which would
still have the dependency and hence fail.
(From OE-Core rev: bfaaeb44c5023e2d2a9414c07694c75fa527283b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These image recipes are meant to be examples that people can copy and
modify completely for their own purposes, and most of them are so
trivial they don't really need copyright notices anyway, so trim them
off.
(From OE-Core rev: 22db8917f6301595a48f6dcbcccc27627c8a3941)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When core-image-minimal has been updated in the past, we have on several
occasions missed applying those updates to this recipe, so let's just
base it directly on core-image-minimal and completely avoid that problem
in future.
(From OE-Core rev: 7681e50da86606f4d7b63504f0c9233a1c87b642)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This project has been unmaintained for some time, and even the OpenMoko
project is not using it any more (in favour of FSO). Since we have ofono
in OE-Core which replaces and surpasses its functionality, we can remove
libgsmd.
(From OE-Core rev: 4cd880c61e9d74dbf1a747f3654239cadadf45ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update psplash to the latest version.
* Change the license checksum to use the lines in the psplash.h that contains
license information instead of doing a checksum on the entire file.
(From OE-Core rev: e15dd9dede74c8906e118647ab93941c1fcb35b1)
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current partitioning scheme leaves a 1MB gap between all the
generated partitions by adding a 1 to the end of the last partition to
use as the start of the next. parted is smart enough to not overlap
start and end positions of the same value. This avoids the 1 MB gaps.
Rather than pad the disk with 1MB in the beginning and cut it off at the
MB boundary on the end, we can use 0% and 100% to allow parted to do the
required math and use as much of the disk as possible.
(From OE-Core rev: 8aac6ecc5194c734dfd3d677017ab3ea045b2339)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We create both the boot and root partitions as ext3 now, update the
logging accordingly.
(From OE-Core rev: 4436639eed57d818992596d6f0f7b53d3bbd4800)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
swap_size currently uses a hard coded percentage and ignores the
swap_ratio variable. Fortunately they are the same value currently. Make
the calculation use the variable to avoid problems in the future.
(From OE-Core rev: 2678ce668499af0e90994b9da8c518e85de56651)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsb need a more abundant /etc/init.d/functions file to handle lsb test.
Use update-alternative to install file funtions in package initscripts,
when package lsbinitscripts installed the file functions of
lsbinitscripts will be used.
(From OE-Core rev: 478f821462665a9dc6f1755059cdbf642aebbf4d)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcmciautils is the appropriate PCMCIA package these days.
(From OE-Core rev: 5066f7e9750253bc4678f2884e15f0333e60932b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2605].
Added openssh-sftp-server to the tools-debug IMAGE_FEATURE.
(From OE-Core rev: a6b6df1350149c116050cb93c3c7b4802c709d31)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gets systemd building with uclibc
(From OE-Core rev: d577fa59d8643954249fed7a79232e609add36f8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds uclibc patches to build systemd there are
new functions that are used by systemd which are needed
Additionally when using gold linker to build userspace
based on uclibc there are spurious hidden symbol that
show up in librt.so and libc.so which should not exist
So we patch uclibc for that
(From OE-Core rev: ecffa7571ed27a75e3248cb860affae233249440)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc and uclibc-initial were providing conflicting PROVIDES
separate the common bits into logical pieces. Create a common
inc file to hold package information and version specific includes
so correct logical units can be included in uclibc and uclibc-initial
recipes.
(From OE-Core rev: bdfd2f6f286889b8920ebf6a670542b26534c1cb)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quote for eglibc source:
for mips eglibc now builds syscall tables for all abi's
so we make sure that we choose right march option which is
compatible with o32,n32 and n64 abi's
e.g. -march=mips32 is not compatible with n32 and n64 therefore
we filter it out in such case -march=from-abi which will be
mips1 when using o32 and mips3 when using n32/n64
(From OE-Core rev: 6a013236d362874c661aa5f15b948aac32177181)
Signed-off-by: Dennis Lan <dennis.yxun@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
removed 2 patches that are now fixed upstream
updated hash.c LIC_FILES_CHKSUM due to updating the date to 2012
(From OE-Core rev: b13b2894217ba085931b2a0410b7715d7fa13868)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gets rid of some phony rdepends on uclibc-dev
being reported
(From OE-Core rev: 4eab0ed5dd23c2093992854c19ad5ab8c862746e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If anyone wants it add toolchain-layer from meta-openembedded
repo to your setup
(From OE-Core rev: 505d82df47628b72e2af6f73e7c33fbb9812fdd1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed otherwise glib-2.0 wont run
correctly
(From OE-Core rev: c495e31f278e49e15fb48285f3b68794f6cf888e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When update alternatives was modified, the syslog configuration file
alternative was incorrectly defined to be "busybox". Fix this by
enabling the proper target file.
[YOCTO #2557]
(From OE-Core rev: 935f2c02809814de2b903a704707d7bc85bbefdf)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On Fedora 17, bash has moved to /usr/bin/bash and the configure process finds it
on the host machine there, this ensures that it is set correctly for the target.
[YOCTO #2363]
(From OE-Core rev: 133c2a12d13028a3829c87a59a2ff4fe21f57260)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rfkill is a usefull tool when you have a device with bluetooth and wifi enabled
[YOCTO #2494]
(From OE-Core rev: f71258f0ef96802e714b6f12ecc8c17842d6cf87)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pth is not portable to uclibc therefore we need to exclude it for
uclibc based systems.
(From OE-Core rev: 6482f276533f3a177e07def9d616958d9bbc10c6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gets the important fix for eventfd syscall
handling which was exposed by glib 2.32 upgrade
without this patch core-image-sato would get stuck
and wont boot all the way through
Same patch is needed for 0.9.33 as well
(From OE-Core rev: 80fa01c6ea618ea32ab40d151d8be2347ede30b3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a multiple job build, Makefile can simultaneously
be installing and removing libgettextlib.a. We serialize
the operations.
(From OE-Core rev: 2750546b2152eecdbb37e963a2495383f6944184)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unstable version 1.5.12 also supported
(From OE-Core rev: 1a5ae9b47c6294f1969a6a36f9ffddc39a707849)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the usr/lib directory doesn't exist, the toolchain can fail to even try to
find crti.o in a completely different directory. This causes a failure for the
case where baselib is lib64.
(From OE-Core rev: 3c368f4c989bee68953b6d0fbf2adc44f97cc100)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than hardcoding the multilib path in a map, and hardcoding dest sysroot
symlink creation in a hook, now we just use -print-sysroot for both, and pass
the appropriate multilib args to the toolchain for particular tunes.
(From OE-Core rev: b9a9c28f7052884b2a6a33cf73cb6d7e2e3d11ff)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2454]
(From OE-Core rev: a07d03cc6f67c88feb9813ae7deb6e4a93552dfe)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In addition to switching to the new update-alternatives, it was discovered
that the sln, shutdown, halt, reboot and related commands were never generated.
Remove these from the list. (These appear to have been removed from util-linux
some time ago.)
(From OE-Core rev: 55c01de28a28a4cfe16d36663c190a874ef2e85d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also remove postinst and prerm which were not being used.
(From OE-Core rev: 60fd9974e5c9a0576059ebded6de7b599f9574e5)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this change, libelf was "floating" for linuxstdbase for example,
leading to build failures. This patch moves all the common options
into a common variable.
(From OE-Core rev: 382bd564d0675bded38459943ab1fe5dbc1e9ee7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't DEPEND on binutils for ansidecl.h so ensure we should never
use the header. This makes builds determinstic and means something like:
bitbake binutils
bitbake libxml2 -c configure
bitbake binutils -c clean
bitbake libxml2
doen't fail to build.
(From OE-Core rev: fe6cabfb0c6f382ef6131e07437b90c2afbf5488)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fix_for_automake_1.11.2.patch removed as issue resolved upstream
* Have README as license file instead of several source files that just
refer to it
(From OE-Core rev: 330173c75426aa38919091da9ae8a9e90de9e0e2)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Read /proc/mounts only once.
* Support many more network filesystem types.
* Remaining differences to netbase 4.47:
- Uses the mountvirtfs keyword instead of mountkernfs
- Doesn't use lsb functions
- Doesn't print a warning if /etc/network/options exists
- Doesn't use --exclude parameter for ifup, because
busybox doesn't support it.
(From OE-Core rev: faca42ee5249cf6aae9e53e44bb404de21dd4471)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ncurses failure non-gplv3 build (race issue) like the following \
error information:
| tic: error while loading shared libraries: /srv/home/pokybuild \
/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/\
work/x86_64-linux/ncurses-native-5.9-r8.1/ncurses-5.9/narrowc/lib\
/libtinfo.so.5: file too short
| ? tic could not build /srv/home/pokybuild/yocto-autobuilder/\
yocto-slave/nightly-non-gpl3/build/build/tmp/work/x86_64-linux/\
ncurses-native-5.9-r8.1/image/srv/home/pokybuild/yocto-autobuilder\
/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/x86_64-linux\
/usr/share/terminfo
| make[1]: *** [install.data] Error 1
This is a race issue which is caused by
install.libs and install.data:
1) install.data needs run tic
2) tic needs libtinfo.so
3) install.libs would regenerate libtinfo.so
4) but install.data doesn't depend on install.libs, and they can run
parallelly
So there would be errors in a very critical condition: tic is begining
to run at the same time when install.libs is generating libtinfo.so, and
this libtinfo.so is not integrity, then there would be the above error.
Let task install.libs run before install.data for fixing this bug.
[YOCTO #2298]
(From OE-Core rev: 80e4833782edc5fbda2a7f5d003a854f127137ec)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add libc-mtrace as dependency for task-core-tools-debug
now eglibc-mtrace gets included in an sdk image and not in a non-sdk image.
This does not affect builds with uclibc.
This fixes bug: [YOCTO# 2374]
(From OE-Core rev: a2ad2870a54108027ed33e977470f5f72e0bce1b)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a rename per the purchase of CodeSourcery by Mentor Graphics
Corporation, and associated naming change.
(From OE-Core rev: dead1540d769fc91a5bd171070a5c96a9f00a2c7)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The work is done in glibc upstream we backport
the relevant patches
(From OE-Core rev: 8df03a0b8bd92cf7b73b816dacf3e362cfce557a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These files are alike other qemu machines they
help in creating a working network interface when
using qemumips64 or qemush4
(From OE-Core rev: 1e7406e4f2f93b6b4fa75716c4e901a96206be69)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add mips64 to binary locale arches
Enabling ports in addons causes wrong
machtype to be chosen for mips64 and
it always chose mips32 which is wrong
for mips64 so enable all the addons
we have and we were enabling them anyway
(From OE-Core rev: da7f9093ad7aa4188cc3d420668b0bda7d950a0f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes bug [YOCTO #2443]
The prototype of findidx() has changed, but the code in xregex.c is
still using the old prototype. This issue stayed hidden because this
code only gets excercised when OPTION_POSIX_REGEXP_GLIBC is disabled
in the eglibc configuration.
See the patch for further information.
(From OE-Core rev: 8691038efb0aca4a2cd61fce0c53d10092e48b75)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 22a2297c712d3b3ca0335197943483218c92ef3e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 910452727fc277c1caec7612b36c37b58d845350)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to add MLPREFIX when set RDEPENDS by setVar() function.
(From OE-Core rev: 9407895c88e46490d0ef9bb185f73466e7204c15)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.2.6 is no more fetchable and 1.2.7 fix some bugs, full changelog is
available here : http://zlib.net/ChangeLog.txt
(From OE-Core rev: 2f071e32128d8c022277c8af72dae47f60cf212b)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some apps had issues in runtime when dbus-glib wasn't rebuilt and
reinstalled after glib upgrade, see:
http://www.shr-project.org/trac/ticket/1980
(From OE-Core rev: af04af955b1443861a9f7e5fbf87a93546f9acd9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* g_once_init_enter.patch shouldn't be needed after upstream commit
794c1a30bc27b4c8d77537813acb1213d5ac80f2
* LIC_FILES_CHKSUM change is only because PCRE was upgraded and now
pcre.h says "Copyright (c) 1997-2012 University of Cambridge" instead
of 2010 and COPYING file
"Please see the file LICENCE in the PCRE distribution for licensing
details." but LICENSE file is not part of glib distribution (but still
BSD in standalone PCRE)
(From OE-Core rev: 231a3e046900f8fae2e0aa4fe5f2bee4c290b0b0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
(From OE-Core rev: bf403680d72e360c7382f540ea25cfdcbe77b4e5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regular expression did not check for mips64
(From OE-Core rev: 945b817d381bdb68202982536daaaaff78ad5761)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Support resolvconf
* Avoid bashism $((metric++))
* Use 'domain' instead of 'search' for domain parameter
(From OE-Core rev: 3d4ccf98b83fe662f375cd5b029fdd602824c0e8)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* OE-Core provides its own copy of simple.script.
(From OE-Core rev: 3a36efc17c8504b00a7a277a67a7b10caa4d1cdc)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This silences one of the QA warnings.
(From OE-Core rev: 3412a1d69201951dd097e4d9a4abcec124d34d68)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a newly installed directory and Makefile that is not needed
in an embedded setup
It fixes:
ERROR: For recipe eglibc, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 35b5fb2dd2131d4c7dc6635c14c6e08ea6926457)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -mabi option is part of HOST_CC_ARCH which does not
appear in CFLAGS. This is for completeness since compiler
already defaults to n64 it wont matter that much
(From OE-Core rev: 2aa0540515efc15957101e24224b425ee00446d9)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc has recently got posix_spawn implementation
and the implementation resided in librt so we link
-lrt to get the configure tests using uclibc provided
definitions and not the gnu-lib wrappers
Let libintl.a live in -staticdev package
(From OE-Core rev: 68e07a5ff114b5f413a5eeedeb551d82bc77774c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we stub out iconv in glib when building
for uclibc which is not needed and infact results
in building systems with false hope of having
iconv and they misbehave during runtime
(From OE-Core rev: d13b1dc1897af733cc2ec22df50ae9d1fd0b48af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use update-alternatives and sync to the way the replace kbd package
does things. Using update-alternatives ensures that the proper provides
are setup in the packages.
(From OE-Core rev: 9c2aa2da7cb9ceec02c5d42d18a623a51f922cea)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to use ALTERNATIVE_LINKS from update-alternatives. This ensures
the links are created consistently and the package provides are
correct.
(From OE-Core rev: 728569a3db005a935e6b08d6aac3e23e88d486df)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are issues with the current unionfs when making a union mount over "/".
Until these are resolved we can't use unionfs for live booting so disable this
temporarily as a workaround.
unionfs is usable in other circumstances.
[YOCTO #2331 workaround]
(From OE-Core rev: 60ee26ae23132b916019d58e20b8c2e1ddd2b471)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove BB_NO_NETWORK because we can not guarentee that all
downloads will be available in the self-hosted image for
the possible targets being built. If this image is run with
out networking, failures may be seen and BB_NO_NETWORK
should be set via the Hob
Update the Poky SRCREV so it has the latest set of fixes and
patches.
(From OE-Core rev: 70541d5e82ee05289eb0095bed4b121d12a00729)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lsb package is needed to enable the distro checking
in the self hosted image. Currently there is no standard
identification in the self-hosted image so use the existing
lsb package which provides lsb_release that parses the
/etc/release file
(From OE-Core rev: 1373865ce7f205a8e63f42caf436e9e2f7a565f5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes glib-2.0 build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by libglib-2.0-utils-2.30.3-r0.ppc603e
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
[YOCTO #2304]
(From OE-Core rev: 13e6e316d751d0ea3107d5547f6bdd2b74919cad)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need consistent configuration files for opkg so we might as well always use
the full list. This is equal to PACKAGE_ARCHS in the non-multilib case.
This fixes various multilib failures with ipk multilibs.
(From OE-Core rev: bc85abc5013d0c831cc3c3823df45536c293aaba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-running the debug_patch task would cause the build to fail. This patch
moves the extra patch handling directly into SRC_URI and removes the need
for the separate task, allowing safe re-execution of each task.
[YOCTO #2194]
(From OE-Core rev: 1d6156e37ef0f36cf5ce8eeaaf23560215c86833)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a number of bogus preferred providers warnings too.
(From OE-Core rev: 823a2f96df84547216a26697838977a162f838c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /sur/bin/perl
Fedora 17 alpha also has /bin/perl
this causes eglibc build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by eglibc-utils-2.13-r23+svnr15508.i586
NOTE: package core-image-sato-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato.bb,
do_rootfs) failed with exit code '1'
This Fixes bug : [YOCTO #2286]
RP: Updated to better account for -nativesdk
(From OE-Core rev: 381bf0d364da5970682502f8f124264907587b87)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 7c95d554c431451f975e1e5d0336d1fb7d0ce7ae.
eglibc uses the PERL to execute things as well as encoding the path
in target scripts. We will therefore have to resort to sed on the scripts
at do_install time to fix the problems originally reported. This patch
causes various weird build failures and needs to be removed.
(From OE-Core rev: 160ee52b9563dac64941b5f6e2e072171ad396b8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Export PYTHONHOME to ${STAGING_DIR_NATIVE}/usr. In this way python will search
for modules in native sysroot.
[YOCTO #2134]
(From OE-Core rev: 230b235329bcaca1a95afd89801d28768aff483b)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fedora 17 has /usr/bin/perl as well as /bin/perl, which results in
the perl path set in thetarget perl scripts as /bin/perl
While we install perl on target at ${bindir}/perl i.e. /usr/bin/perl
Hence the target perl scripts are broken when build is done on fedora 17.
Work around the issue by providing cached value of perl path to eglibc
This fixes bug [YOCTO #2286]
(From OE-Core rev: 7c95d554c431451f975e1e5d0336d1fb7d0ce7ae)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Task do_patch_append calling do_fix_ia_headers is removing files using "rm" not "rm -f".
So first time execution of patch task is success, while re-execution of patch task
fails as it tries to remove the files already removed.
So changed "rm" to "rm -f".
[Yocto #2194]
(From OE-Core rev: f960da1b48bafb3ccdd58222fe9fc12c1bb6ed9b)
Signed-off-by: Venkata Ramana Gollamudi <ramana.gollamudi@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1487]
When booting up with liveCD image, init scripts can't work well on read-only filesystem. Unionfs,
which is supported in Yocto kernel, allows a filesystem to appear as writeable, but without
actually allowing writes to change the filesystem.
Use unionfs to mount rootfs and make root file system can be writen when using liveCD to boot up.
Set UNION_FS variable depending on kernel config, so that it can work with kernel which doesn't
have unionfs feature.
[RP: Mark recipe as machine specific due to kernel dependency]
(From OE-Core rev: b7f4e8d153c2aebbcf6556e7e926f6b94801d6aa)
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only add locale package dependencies if the eglibc is configured
with locale support.
This avoids dependencies issues for distros such as poky-tiny
[RP: Add PR bump]
(From OE-Core rev: bcaea8ec9c9c333f76b368225f60d4fb54c1c7b2)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox-udhcpc-no_deconfig.patch broke the options,
preventing udhcpc from forking into the background
if no lease can be obtained.
(From OE-Core rev: 24ad7ca9bd99cd6cd11f7d2d49a79fe3521cbcec)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding vte for a more full featured terminal
adding eglibc-gconv-ibm850 for mcopy
(From OE-Core rev: b30a6eb08640b25bb0b0530f51a8cb749de1c311)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a nicer theme (Clearlooks) to improve Hob's appearance in the self
hosted image and fix the progress bar not changing colour when the build
fails.
Fixes [YOCTO #2208]
(From OE-Core rev: 19a13ecceac1f48fcfe1552e88df18edd96e1bea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default amount of reserved space for ext2/3 is 5% - this amounts to
about 2GB of a 40GB filesystem that the builder user can't make use of.
We don't need this much reserved so peg it back to 0.5% which should be
more than enough.
(From OE-Core rev: c62d6d119c107fc60894ba25e83c96536a1b423c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2227]
I've updated the image descriptions per the bug description.
(From OE-Core rev: 479b020edbc609c3ae1e3846e9e0d1643ac10059)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to have about 40G to do a full sato build even with rm_work enabled
Add sudo priveleges inorder to allow the builder user to setup the tap/tun
devices needed by runqemu
(From OE-Core rev: 3e4562500956550dbae5467a5fe9289f1d32f775)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe already includes "task-self-hosted" in the IMAGE_INSTALL
line:
IMAGE_INSTALL = "task-core-boot task-core-apps-console task-core-ssh-openssh task-self-hosted"
so there's no apparent need to include it again further down.
(From OE-Core rev: bbc7f24d463c11b16f000462528c18bbb86b1e88)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGE_NO_GCONV var manipulations ware happening in the
eglibc-options.inc file, and the eglibc-locale recipe do not
see it. Moving that into the libc-package.bbclass which is
common to eglibc & eglibc-locale recipes.
This fixes bug: [YOCTO #2089]
This avoids this error for poky-tiny
NOTE: package eglibc-locale-2.13-r19: task do_populate_sysroot: Started
ERROR: Error executing a python function in
/opt/poky.git/meta/recipes-core/eglibc/eglibc-locale_2.13.bb:
OSError: [Errno 2] No such file or directory:
'/home/rchatre/concordia/dev/ccd-distro-work/tmp/work/core2-poky-linux/eglibc-locale-2.13-r19/package/usr/lib/gconv'
ERROR: The stack trace of python calls that resulted in this exception/failure
was:
ERROR: File "package_do_split_gconvs", line 264, in <module>
ERROR:·
ERROR: File "package_do_split_gconvs", line 45, in package_do_split_gconvs
ERROR:·
ERROR: File "package.bbclass", line 30, in do_split_packages
ERROR:·
ERROR: The code that was being executed was:
ERROR: 0260:»------»-------bb.note("generation of binary locales disabled.
this may break i18n!")
ERROR: 0261:
ERROR: 0262:
ERROR: 0263:
ERROR: *** 0264:package_do_split_gconvs(d)
ERROR: 0265:
ERROR: (file: 'package_do_split_gconvs', lineno: 264, function: <module>)
ERROR: 0041:»------»-------»-------d.setVar('RPROVIDES_%s' % pkg,
pkg.replace(bpn, 'glibc'))
ERROR: 0042:
ERROR: 0043:»------do_split_packages(d, gconv_libdir,
file_regex='^(.*)\.so$', output_pattern=bpn+'-gconv-%s', \
ERROR: 0044:»------»-------description='gconv module for character set
%s', hook=calc_gconv_deps, \
ERROR: *** 0045:»------»-------extra_depends=bpn+'-gconv')
ERROR: 0046:
ERROR: 0047:»------def calc_charmap_deps(fn, pkg, file_regex,
output_pattern, group):
ERROR: 0048:»------»-------deps = []
ERROR: 0049:»------»-------f = open(fn, "r")
ERROR: (file: 'package_do_split_gconvs', lineno: 45, function:
package_do_split_gconvs)
ERROR: Function failed: package_do_split_gconvs
ERROR: Logfile of failure stored in:
/home/rchatre/concordia/dev/ccd-distro-work/tmp/work/core2-poky-linux/eglibc-locale-2.13-r19/temp/log.do_package.31042
NOTE: package eglibc-locale-2.13-r19: task do_package: Failed
ERROR: Task 552 (/opt/poky.git/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
do_package) failed with exit code '1'
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use SDK_GLIBC_ADDONS for eglibc-nativesdk so that it is not
dependant on the target eglibc's GLIBC_ADDONS settings.
(From OE-Core rev: e165203a6a7eb1fd47a20c3ede4d5a20ad49487f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext-minimal-native andgettext-native are trampling over each other's files. This can
be reproduced with:
bitbake gettext-minimal-native
bitbake gettext-native
bitbake gettext-native -c clean
bitbake shadow-native
which will fail since the aclocal gettext macros will have disappeared. This patch
fixes the problem by giving ownership of them to gettext-minimal-native and ensuring
there is a correct dependency on this.
(From OE-Core rev: 5bcb68a232539cf11a30e3b812b2fbd6d7d76e35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) remove the assumption ${DL_DIR} ends with downloads/.
Thanks Paul Eggleton for pointing this out.
2) remove downloads/git2_* tarballs to speed up the rootfs creation.
This is ok since we still have the git2/.
Thanks Richard Purdie for suggesting this.
(From OE-Core rev: 58ba59f034941bf167e70ae6c08117e5184a20ec)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get new patches and remove the one that got merged upstream
(From OE-Core rev: 0e1a843a1f0c54f00736170de39a8a8f62d26879)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch installs the poky source into the /home/builder/poky/ of the
self-hosted-image.
This makes the user of self-hosted-image easier to start a build.
I think the recent poky master is stable enough, so I specify
a commit number by SRCREV -- we may want to update this number before
releasing 1.2.
This patch fixes [YOCTO #2065]
(From OE-Core rev: 1f2d9be4516cd8c1ed5ce468cb2276f062296ad1)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Added code for supporting target based pseudo
fixed indentation
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typoes fixed: "enviroment", "editted", "spliting", "scheulder".
(From OE-Core rev: 17e981a857a51b0bec08c929e8539d36d83874b6)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 68dc2a3fa30c03a196d650de34d0c657a7b85454 broke opkg upgrade:
| update-alternatives: Error: cannot register alternative watch to
| /usr/bin/watch since it is already registered to /bin/watch
(From OE-Core rev: fa8b2d2bed63fa4fc2af45f094998b0f9e69d272)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 647595821870693186c9ecad1bdfa12fe4ea334d)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
util-linux-lscpu provides an example of pkg level incompatible
license. In this instance, we've set the license for this specific
package as GPLv3. The other packages inherit the recipe LICENSE.
What this allows is the package to not be included on install to
the image.
(From OE-Core rev: ed84f2cee691b16671f93fb68a83ed1b0715c1be)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matthew McClintock
Martin Ertsaas
Mark Asselstine
Martin Jansa
Khem Raj
Paul Eggleton
Richard Purdie
Radu Moisan
Saul Wold
Ross Burton
Constantin Musca
Christopher Larson
Jackie Huang
Andrei Gherzan
Xin Ouyang
Andy Ross
Wenzong Fan
Franklin S Cooper Jr
Roy.Li
Jesse Zhang
Laurentiu Palcu
Fahad Usman
Yao Zhao
Morgan Little
Darren Hart
Amy Fong
Jessica Zhang
Andrea Adami
Nitin A Kamble
Zhenhua Luo
Kang Kai
Cristian Iorga
Robert P. J. Day
Lianhao Lu
Valentin Popa
Dennis Lan
Marcin Juszkiewicz
Mark Hatle
Joe Slater
Robert Yang
Steffen Sledz
Marko Lindqvist
Andreas Oberritter
Xiaofeng Yan
Christopher Larson
Dongxiao Xu
Eric Bénard
Mark Norman
Venkata ramana gollamudi
Yang Shi
Dexuan Cui
Elizabeth Flanagan