They were CEVs and should be already in the source after upgraded.
(From OE-Core rev: e8a5332d467434ee65e0f29927abb9c51b025aff)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some distros may prefer to use the upstream systemd support for
starting getty on serial ports. This is now possible by adding
"serial-getty-generator" to PACKAGECONFIG.
The default is unchanged, i.e. systemd's own serial-getty@.service
file does not get packaged and instead systemd-serialgetty is pulled
into images via RRECOMMENDS.
(From OE-Core rev: 2a8d0df47c9d28f8ca7285861dee7a178273eae4)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having ncurses-terminfo-base before ncurses-terminfo is currently irrelevant
because the current file lists are completely disjunct. However, when building
"stateless" via a .bbappend, the content of curses-terminfo-base also needs
to live under /usr/share and then it becomes important that files
belonging to ncurses-terminfo-base are checked first.
(From OE-Core rev: b868345f533fc0219845b243a29c12c9a19a3ff3)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initially I was reluctant to do this however makeinfo is a dependency
of the buildsystem and only adds around 400kb to the buildtools-tarball
so it likely makes sense to add it. This allows people to use
the project on older environments.
Need to enable nativesdk-texinfo but this seems straightforward.
[YOCTO #8990]
(From OE-Core rev: 5e290201e13a685818ff03ad9cd6679977e560d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the task hash changes between server and worker context
leading to changing task checksums.
(From OE-Core rev: d60806e56aed2f62f6a0e030a564f7fdc4a1314d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be more than one root=/dev/foo in the config file which
would cause unepected errros on the installed target, so remove all of
them.
[YOCTO #9354]
(From OE-Core rev: ca402bc3bc4e9a5c3e19a6ca504017335212b2c9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It mis-matched "SanDisk" or "Disk Flags" before, which caused unexpected
error.
(From OE-Core rev: a68ac76c1b6ed4c1a2fbc944c5021c89fd26217f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-resolved build fails without gcrypt PACKAGECONFIG. Backport the fix.
Also remove the comment about resolved's dependence on gcrypt.
[YOCTO #9219]
(From OE-Core rev: 5ba3115a699357a5d272836b7edf883753a551d0)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yocto's ldconfig-native was exported from an old version of glibc and
generates an ld.so.cache that is partially ignored by current versions
of glibc when loading libraries. This occurs for 64-bit binaries, where
glibc expects FLAG_ELF_LIBC6, but ldconfig-native only generates the
standard ELF flag. Fix this with an additional patch on top of the patch
for now.
You can verify this by applying the patch below to your target copy of
glibc and running
LD_DEBUG=libs /lib64/ld-linux-x86-64.so.2 --list $anybinary
--- ./elf/dl-cache.c.orig 2016-01-07 11:05:36.823447171 +0100
+++ ./elf/dl-cache.c 2016-01-07 11:19:53.925878628 +0100
@@ -106,6 +106,8 @@
if (_dl_cache_check_flags (flags) \
&& _dl_cache_verify_ptr (lib->value)) \
{ \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS))\
+ _dl_debug_printf (" considering file %s\n", cache_data + lib->value); \
if (best == NULL || flags == GLRO(dl_correct_cache_id)) \
{ \
HWCAP_CHECK; \
@@ -117,6 +119,9 @@
searching. */ \
break; \
} \
+ } else { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" ignoring file %s due to flags %x, expected %x\n", cache_data + lib->value, lib->flags, GLRO(dl_correct_cache_id)); \
} \
} \
while (++middle <= right); \
@@ -265,14 +270,23 @@
/* Only accept hwcap if it's for the right platform. */
#define HWCAP_CHECK \
- if (lib->hwcap & hwcap_exclude) \
+ if (lib->hwcap & hwcap_exclude) { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" hwcap mismatch %x vs. %x\n", lib->hwcap, hwcap_exclude); \
continue; \
- if (GLRO(dl_osversion) && lib->osversion > GLRO(dl_osversion)) \
+ } \
+ if (GLRO(dl_osversion) && lib->osversion > GLRO(dl_osversion)) { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" os version mismatch %x vs. %x\n", lib->osversion, GLRO(dl_osversion)); \
continue; \
+ } \
if (_DL_PLATFORMS_COUNT \
&& (lib->hwcap & _DL_HWCAP_PLATFORM) != 0 \
- && (lib->hwcap & _DL_HWCAP_PLATFORM) != platform) \
- continue
+ && (lib->hwcap & _DL_HWCAP_PLATFORM) != platform) { \
+ if (__glibc_unlikely (GLRO_dl_debug_mask & DL_DEBUG_LIBS)) \
+ _dl_debug_printf (" platform mismatch %x vs. %x\n", lib->hwcap & _DL_HWCAP_PLATFORM, platform); \
+ continue; \
+ }
SEARCH_CACHE (cache_new);
}
else
This version of ldconfig-native should really be replaced with a version
matching the glibc source in use on the target platform.
(From OE-Core rev: bf9c1e6fa1c8eb86670383bad9b7c2e54bfe17f4)
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case a getty is required on a UART which is not being
used as the kernel console, the current agetty invocation
fails to obey the baud rate configured through the
SERIAL_CONSOLES variable because it uses --keep-baud.
(From OE-Core rev: b54b73834e73d55de1038b55d0a4d7f49cda52d0)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rich Felker (2):
fix padding string formats to width in wide printf variants
fix outdated pathnames in COPYRIGHT file
Szabolcs Nagy (7):
deduplicate bits/mman.h
mips64: add recent linux syscall numbers
add copy_file_range syscall numbers from linux v4.5
add IPV6_HDRINCL socket option from linux v4.5
add SO_ATTACH_REUSEPORT_[CE]BPF socket options from linux v4.5
add EPOLLEXCLUSIVE epoll flag from linux v4.5
add MADV_FREE madvise command from linux v4.5
Timo Teräs (1):
fix gethostbyaddr_r to fill struct hostent.h_length as appropriate
updated paths in copyright text
see http://git.musl-libc.org/cgit/musl/commit/?id=dc4520d9c0b79bc5944f509e4e9061e5081e38ca
(From OE-Core rev: 2fe87b495c0529b87dd46905e048549235f543e0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The name changes from overlayfs to overlayo
* The workdir is a must when mount
* The updir must be a subdir of rootfs.rw
This patch plus with another one which has been sent to linux-yocto can
fix the error when boot iso:
EXT4-fs (loop0): re-mounted. Opts: data=ordered
Populating dev cache
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/rcS.d/S36udev-cache: line 73: can't create /etc/udev-cache.tar.gz:
Read-only file system
udev-cache: update failed!
rm: can't remove '/etc/udev/cache.data': Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
rm: can't remove '/tmp': Read-only file system
ln: /tmp/tmp: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
ln: /etc/resolv.conf: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
/etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create
/etc/volatile.cache.build: Read-only file system
(From OE-Core rev: ba918e0e36418ec6e14aef537ff4fdf45af6d8d4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '/' in the end is not needed, which caused '//' in the path.
(From OE-Core rev: 6b0fc87ced857763ae7e9d1012fb9f5c952c2cc8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set all permissions.
This fixes various problems such as:
Unable to create '/home/builder/poky/bitbake/lib/bb/pysh/pyshtables.py'
[Errno 22] invalid mode ('w') or filename '/home/builder/poky/bitbake/lib/bb/pysh/pyshtables.py'
and failure to create sub-directories in the directory 'poky':
mkdir: cannot create directory '<dir>': Invalid argument
While in there, added a few non-functional changes:
Added sample proxy settings into .bashrc
Added environmental variable with SRCREV actually used to populate the Build
Appliance into .bashrc (BA_SRCREV)
[YOCTO#9314]
(From OE-Core rev: fcc558874d1ea533fb6ca488d2ab2223c1e21881)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* move gdbus-codegen to ${PN}-codegen
* move other development tools and data files to ${PN}-dev
* remove references to non-existent paths
(From OE-Core rev: 351064e9c5deb6411c8a0d40ebd4fd4f83299d4e)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new class uses gio-querymodules tool on postinst and postrm.
This regenerates the module cache which is useful to avoid loading
modules that are not needed at runtime: If a Gio module is not
listed in the cache file it will always get loaded.
* Add a postinst-intercept 'gio-module-cache': it runs
gio-querymodules using qemuwrapper. This is required because the tool
actually loads the modules to generate the cache.
* Add a gio-module-cache class that adds postinstall and postrm
scripts. In the sysroot population case use the new intercept.
* Inherit the new class in glib-2.0, glib-networking and gconf.
Fixes [YOCTO #9241].
(From OE-Core rev: 168cf5502a2dda78348cc9679e37bed0c69c0208)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gio-querymodules should be used whenever new Gio modules are installed
(to regenerate the module cache) so it should be available by default.
Each multilib is going to need its own variant (because the tool
actually dlopens the modules when cache is generated), so it's
packaged as ${libexecdir}/${MLPREFIX}gio-querymodules
(From OE-Core rev: 832a499046e41be48fb035fa86df24589b94ada3)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysvinit is objectively less maintained than util-linux or busybox, each
of which may supply its own mountpoint implementation. Adjust the
ALTERNATIVE_PRIORITY to select the sysvinit implementation as the last
resort.
(From OE-Core rev: 92c6b896e3b11283e2c313e6a2ac3497a99a13a0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow mountpoint to be installed separately from the rest of util-linux,
to conserve disk space, and to minimize the impact of switching to/from
this version of mountpoint.
(From OE-Core rev: ea643811f44774dd9038d76ff01e13f33478c9cb)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we create nativesdk-coreutils, a lot of warnings appear,it
show many files can't find. Because in the coreutils recipe, it
didn't contain the do_install for the nativesdk, so when the
alternative system check the files in the following process, it
can't find the files. So we should add the do_install for the
nativesdk, change the function do_install_append_class-target() to
do_install_append() in the file:
meta/recipes-core/coreutils/coreutils_8.25.bb
in this way, the alternative system can find the files, the warnings
disappear.
(From OE-Core rev: 37039da6a09d7781beb93892932488940786b41f)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They otherwise get pulled into world builds via dependencies
even when they are excluded from world globally
(From OE-Core rev: d758a4445a42405cb3f317c07ad48456cdc4d9f4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
valgrind does not support nios2 yet, so disable it.
(From OE-Core rev: b27ab57fe6108a68553dddaf9df4dbc3bddb7916)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemtap does not support nios2 yet, so disable it.
(From OE-Core rev: 852a10e2f0b3d9fa5df8df529aac7acc424c3da9)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kexec is not supported on nios2, so disable it.
(From OE-Core rev: 39823c2a3428a12a93bc4fb76601212c1b75db0c)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are not available on nios2 yet, so disable them.
(From OE-Core rev: b399ab224eea069fa1d69f845642b2e950d41472)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-ptest only runs a couple of tests currently.
* Install all test binaries and required data files
* Add missing runtime dependencies for -ptest
* Fix paths required for on-target testing in do_configure_prepend()
* cleanup do_install_ptest()
For reference, results on current core-image-sato:
PASS: 109
SKIP: 5
FAIL: 2
test-execute failure:
https://github.com/systemd/systemd/issues/2852
test-acl-util failure:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=9269
Fixes [YOCTO #8767].
(From OE-Core rev: 753daf14da4017cd5d245f1587ca44faa39784f5)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When booting from the live image, the label from the bootloader is passed
to init.sh. init.sh uses the label to either boot a live image or call a
script to take over and install the system.
It is possible to add new labels to the bootloader via the LABELS family of
variables, but the names in init.sh were hardcoded to install and
install-efi
this patch checks if a shell script with the same name as the label is
available instead of using a hardcoded list. Any recipe can add such file
and this provide a new boot target to the live image
(From OE-Core rev: 2c10ca0fe612818cb43931b969ad2af5502f1e84)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The eudev recipe included the hwdb.d directory by default,
which ended up making the eudev package a lot heavier than
the old udev, this patch splits the eudev-hwdb package to
avoid using unecessary space when required
(From OE-Core rev: 20038e0e13685ebc6fcbbbb2d96695670e33e3e3)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mips64 port is now available on top of 1.1.14
this updates brings it to OE
Copyright file changed due to mips64 attribution being added
http://git.musl-libc.org/cgit/musl/commit/COPYRIGHT?id=589aefa5b061647e8b9ad9bca3aaa8dc6222460a
(From OE-Core rev: fb6f63cc814c2ef51e93235fcde5c4ac61b5823d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch make `uname -p' and `uname -i' not reporting 'unknown'.
It refers a to Fedora's way to do this.
The coreutils upstream rejects to accept this patch, blaming the
'unknown' result to the kernel not providing enough information.
As on normal distros, `uname -p' and `uname -i' do not report 'unknown',
we refer to Fedora's patch to fix this problem.
(From OE-Core rev: 83c551b46e959d9382fa92ac4178c9c6c883d7c1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As "install.libs" also installs header files, it is
redundant to also call "install.includes".
In fact, doing so can lead to a race, as both targets could
try to install the header files at the same time if running
parallel make. Obviously, with only calling "install.libs",
there is no race with "install.includes".
If there is no race, then the patch fix-include-files-race.patch
is no longer needed.
(From OE-Core rev: 8df2060a323acf2a2cc2bc4076623463039c46a6)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added to help clang compile busybox but since then
the option has been added to llvm and now we have upgraded clang
to 3.8 which has this option available
Fix git recipe to build with mdev feature and update to tip when here
(From OE-Core rev: e617b6f9bf0aa3f1a7a19019f6953d0a102f3039)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Glib hard-codes the install path in search path for GIO modules, which causes
problems when glib-2.0-native is restored from sstate with a different build
directory.
In the future we should relocate symbols directly using the same system that the
eSDK uses, but for now use dladdr() to look up where the library was loaded from
to build the search path.
(From OE-Core rev: 0a009dbfff32566341b2888530423f90f1b3d945)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both targets install.libs and install.includes install the same
files, resulting in a race condition when running parallel make.
This race is addressed in a patch file, making sure only one
of the targets (install.includes) installes the include files.
This will work properly (i.e.ncurses will install as intended
by the recipe) as long as we always install both targets.
(From OE-Core rev: a3df0aa78af1c2fecf847e87cc480fd2ed9afe89)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Including the entirety of DL_DIR in the generated build appliance
image adds a significant amount of space and makes the build
appliance image more awkward to distribute. Add a configuration
option to make the inclusion of sources option and default to
disabling this functionality.
(From OE-Core rev: 7975325e3d8dee159752ae2304b0c00361bfd2a7)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-pygtk hasn't been updated in several years, is incompatible
with the current version of pygobject, and is generally obsolete as
all modern python gtk apps use introspection directly.
(From OE-Core rev: 14f62d1663b7a9082b8026cd5d22eea66ad75174)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Store the ascii armored pubkey generated using gpg_sign.export_pubkey()
in its own package.
(From OE-Core rev: 9dab5725dace0c54f4c5ed892d18e2d41cca71b5)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The resolved support requires that gcrypt is enabled. PACKAGECONFIG doesn't
support dependencies, so add a comment.
(From OE-Core rev: c885b44480b14554c8835e114a2e5469a82f0598)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide UPSTREAM_CHECK_URI to perform checkpkg task.
(From OE-Core rev: b5fd08bd3836ff7a63d5340bfef40a3ba65d8f0a)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update-alternatives-opkg uses tail, which requires a temporary symlink
on tmpdir during removal, to avoid errors of the type:
/usr/bin/update-alternatives: line 113: tail: command not found
(From OE-Core rev: 398728a78ddb6cbf770045e2684d910a0ba0fc90)
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path isn't correct as we use /run/udev now, also /run/udev is the default
value, and eudev doesn't let you override it like this anyway.
(From OE-Core rev: 779259192c0d1687e5e82dbc8e45c33b29ae0588)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're seeing various failures where nativesdk glibc can't find the gconv
modules. We've tried various workaround but this needs fixing 'properly'.
One significant problem is knowing when a binary would use this glibc
and hence when to set the path and when not to.
Add the default path to its own special section which the sdk
relocation script already knows how to handle and remap.
This significantly improves the usability of uninative.
(From OE-Core rev: d40cb4a359dbc5d762fabd996c29e468f5398dd9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udev has started to fail on new kernels (4.4), due to being deprecated in favor
of systemd's udev implementation. To maintain a sysvinit alternative we also
need to provide an alternative to udev. Eudev is a fork of systemds udev,
this new eudev recipe provides upstream udev 220 funcitonality.
- Removes patches that dont apply anymore
- ToDo: eudev-ptest?
[YOCTO #8998]
(From OE-Core rev: a22797f7c37a865420837b5c29b270f73ee4c6ce)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext installs a libtool .la file for non-glibc systems
since it builds libintl for them unlike glibc where it finds that using
libc's gettext implementation is just fine. Same is not true for
musl even though musl provides itw own gettext implementation much on
then lines of glibc.
ideally gettetxt should be fixed to behave on musl, but at this time its
not clear if APIs are same and complete.
Deleting .la file helps compiling packages like util-linux when using
fstack-protections since it does not alter the order of libc on linker
cmdline
Moved src_uri checksums just below the SRC_URI as matter of formatting
(From OE-Core rev: 83d31c874c58c9e98f1f99cbad1a583e65ed72e6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install section of a systemd service may contain RequiredBy dependency,
which is not handled currently. This means that symlinks to enable the
service are not created and the service may not be started.
Also fix debug output (all dependencies were printed instead of the one
which was enabled or disabled).
(From OE-Core rev: 6f4d9d9675ce39f5154de30b2921ada019a93d0f)
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang
Patrick Ohly
Richard Purdie
Maxin B. John
Clemens Lang
Awais Belal
Khem Raj
Juro Bystricky
Jussi Kukkonen
Richard Tollerton
Dengke Du
Marek Vasut
Jérémy Rosen
Alejandro Hernandez
Chen Qi
Ross Burton
Joshua Lock
Alexander Kanavin
Ioan-Adrian Ratiu
Herve Jourdain
Alejandro del Castillo
Andre McCurdy
Tomas Novotny