* Read /proc/mounts only once.
* Support many more network filesystem types.
* Remaining differences to netbase 4.47:
- Uses the mountvirtfs keyword instead of mountkernfs
- Doesn't use lsb functions
- Doesn't print a warning if /etc/network/options exists
- Doesn't use --exclude parameter for ifup, because
busybox doesn't support it.
(From OE-Core rev: faca42ee5249cf6aae9e53e44bb404de21dd4471)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ncurses failure non-gplv3 build (race issue) like the following \
error information:
| tic: error while loading shared libraries: /srv/home/pokybuild \
/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/\
work/x86_64-linux/ncurses-native-5.9-r8.1/ncurses-5.9/narrowc/lib\
/libtinfo.so.5: file too short
| ? tic could not build /srv/home/pokybuild/yocto-autobuilder/\
yocto-slave/nightly-non-gpl3/build/build/tmp/work/x86_64-linux/\
ncurses-native-5.9-r8.1/image/srv/home/pokybuild/yocto-autobuilder\
/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/x86_64-linux\
/usr/share/terminfo
| make[1]: *** [install.data] Error 1
This is a race issue which is caused by
install.libs and install.data:
1) install.data needs run tic
2) tic needs libtinfo.so
3) install.libs would regenerate libtinfo.so
4) but install.data doesn't depend on install.libs, and they can run
parallelly
So there would be errors in a very critical condition: tic is begining
to run at the same time when install.libs is generating libtinfo.so, and
this libtinfo.so is not integrity, then there would be the above error.
Let task install.libs run before install.data for fixing this bug.
[YOCTO #2298]
(From OE-Core rev: 80e4833782edc5fbda2a7f5d003a854f127137ec)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add libc-mtrace as dependency for task-core-tools-debug
now eglibc-mtrace gets included in an sdk image and not in a non-sdk image.
This does not affect builds with uclibc.
This fixes bug: [YOCTO# 2374]
(From OE-Core rev: a2ad2870a54108027ed33e977470f5f72e0bce1b)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a rename per the purchase of CodeSourcery by Mentor Graphics
Corporation, and associated naming change.
(From OE-Core rev: dead1540d769fc91a5bd171070a5c96a9f00a2c7)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The work is done in glibc upstream we backport
the relevant patches
(From OE-Core rev: 8df03a0b8bd92cf7b73b816dacf3e362cfce557a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These files are alike other qemu machines they
help in creating a working network interface when
using qemumips64 or qemush4
(From OE-Core rev: 1e7406e4f2f93b6b4fa75716c4e901a96206be69)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add mips64 to binary locale arches
Enabling ports in addons causes wrong
machtype to be chosen for mips64 and
it always chose mips32 which is wrong
for mips64 so enable all the addons
we have and we were enabling them anyway
(From OE-Core rev: da7f9093ad7aa4188cc3d420668b0bda7d950a0f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes bug [YOCTO #2443]
The prototype of findidx() has changed, but the code in xregex.c is
still using the old prototype. This issue stayed hidden because this
code only gets excercised when OPTION_POSIX_REGEXP_GLIBC is disabled
in the eglibc configuration.
See the patch for further information.
(From OE-Core rev: 8691038efb0aca4a2cd61fce0c53d10092e48b75)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 22a2297c712d3b3ca0335197943483218c92ef3e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the packaging issues since it's installed in the wrong place
ERROR: For recipe eglibc-nativesdk, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 910452727fc277c1caec7612b36c37b58d845350)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to add MLPREFIX when set RDEPENDS by setVar() function.
(From OE-Core rev: 9407895c88e46490d0ef9bb185f73466e7204c15)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.2.6 is no more fetchable and 1.2.7 fix some bugs, full changelog is
available here : http://zlib.net/ChangeLog.txt
(From OE-Core rev: 2f071e32128d8c022277c8af72dae47f60cf212b)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some apps had issues in runtime when dbus-glib wasn't rebuilt and
reinstalled after glib upgrade, see:
http://www.shr-project.org/trac/ticket/1980
(From OE-Core rev: af04af955b1443861a9f7e5fbf87a93546f9acd9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* g_once_init_enter.patch shouldn't be needed after upstream commit
794c1a30bc27b4c8d77537813acb1213d5ac80f2
* LIC_FILES_CHKSUM change is only because PCRE was upgraded and now
pcre.h says "Copyright (c) 1997-2012 University of Cambridge" instead
of 2010 and COPYING file
"Please see the file LICENCE in the PCRE distribution for licensing
details." but LICENSE file is not part of glib distribution (but still
BSD in standalone PCRE)
(From OE-Core rev: 231a3e046900f8fae2e0aa4fe5f2bee4c290b0b0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
(From OE-Core rev: bf403680d72e360c7382f540ea25cfdcbe77b4e5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regular expression did not check for mips64
(From OE-Core rev: 945b817d381bdb68202982536daaaaff78ad5761)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Support resolvconf
* Avoid bashism $((metric++))
* Use 'domain' instead of 'search' for domain parameter
(From OE-Core rev: 3d4ccf98b83fe662f375cd5b029fdd602824c0e8)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* OE-Core provides its own copy of simple.script.
(From OE-Core rev: 3a36efc17c8504b00a7a277a67a7b10caa4d1cdc)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This silences one of the QA warnings.
(From OE-Core rev: 3412a1d69201951dd097e4d9a4abcec124d34d68)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a newly installed directory and Makefile that is not needed
in an embedded setup
It fixes:
ERROR: For recipe eglibc, the following files/directories were installed but not shipped in any package:
ERROR: /var
ERROR: /var/db
ERROR: /var/db/Makefile
(From OE-Core rev: 35b5fb2dd2131d4c7dc6635c14c6e08ea6926457)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -mabi option is part of HOST_CC_ARCH which does not
appear in CFLAGS. This is for completeness since compiler
already defaults to n64 it wont matter that much
(From OE-Core rev: 2aa0540515efc15957101e24224b425ee00446d9)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc has recently got posix_spawn implementation
and the implementation resided in librt so we link
-lrt to get the configure tests using uclibc provided
definitions and not the gnu-lib wrappers
Let libintl.a live in -staticdev package
(From OE-Core rev: 68e07a5ff114b5f413a5eeedeb551d82bc77774c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we stub out iconv in glib when building
for uclibc which is not needed and infact results
in building systems with false hope of having
iconv and they misbehave during runtime
(From OE-Core rev: d13b1dc1897af733cc2ec22df50ae9d1fd0b48af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use update-alternatives and sync to the way the replace kbd package
does things. Using update-alternatives ensures that the proper provides
are setup in the packages.
(From OE-Core rev: 9c2aa2da7cb9ceec02c5d42d18a623a51f922cea)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to use ALTERNATIVE_LINKS from update-alternatives. This ensures
the links are created consistently and the package provides are
correct.
(From OE-Core rev: 728569a3db005a935e6b08d6aac3e23e88d486df)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are issues with the current unionfs when making a union mount over "/".
Until these are resolved we can't use unionfs for live booting so disable this
temporarily as a workaround.
unionfs is usable in other circumstances.
[YOCTO #2331 workaround]
(From OE-Core rev: 60ee26ae23132b916019d58e20b8c2e1ddd2b471)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove BB_NO_NETWORK because we can not guarentee that all
downloads will be available in the self-hosted image for
the possible targets being built. If this image is run with
out networking, failures may be seen and BB_NO_NETWORK
should be set via the Hob
Update the Poky SRCREV so it has the latest set of fixes and
patches.
(From OE-Core rev: 70541d5e82ee05289eb0095bed4b121d12a00729)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lsb package is needed to enable the distro checking
in the self hosted image. Currently there is no standard
identification in the self-hosted image so use the existing
lsb package which provides lsb_release that parses the
/etc/release file
(From OE-Core rev: 1373865ce7f205a8e63f42caf436e9e2f7a565f5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes glib-2.0 build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by libglib-2.0-utils-2.30.3-r0.ppc603e
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
[YOCTO #2304]
(From OE-Core rev: 13e6e316d751d0ea3107d5547f6bdd2b74919cad)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need consistent configuration files for opkg so we might as well always use
the full list. This is equal to PACKAGE_ARCHS in the non-multilib case.
This fixes various multilib failures with ipk multilibs.
(From OE-Core rev: bc85abc5013d0c831cc3c3823df45536c293aaba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-running the debug_patch task would cause the build to fail. This patch
moves the extra patch handling directly into SRC_URI and removes the need
for the separate task, allowing safe re-execution of each task.
[YOCTO #2194]
(From OE-Core rev: 1d6156e37ef0f36cf5ce8eeaaf23560215c86833)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a number of bogus preferred providers warnings too.
(From OE-Core rev: 823a2f96df84547216a26697838977a162f838c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>