There are various usages of ALLOW_EMPTY with no packages specified. This
is not recommended syntax, nor is it likely to be supported in the future.
This patch improves the references in OE-Core, either removing them if they're
pointless (e.g. when PACKAGES="") or specifying which package it applies to.
(From OE-Core rev: fe81bd4f600877e63433184cfc2e22c33bb77db6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* we don't depends on bzip2, so make sure it's not autodetected in
sysroot
(From OE-Core rev: e93186642708cb99bfba776012e345c42e9bd0d5)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patched version of grpconv takes arguments but the check on
argc was not removed. This patch removes this check which
otherwise results in a spurious warning during rootfs creation.
(From OE-Core rev: 845a24e78835e93807cfb810fa99715ac4d14e21)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integer overflows were found in libparted/labels/dvh.c, while attemptting
to assign unsigned int values to int types in some places. These overflows
only can be observed on BE platforms like MIPS, when the "WORDS_BIGENDIAN"
macro is defined in parted.
Defined by unsigned int instead.
(From OE-Core rev: 9acaa764a4df8d589011ff597bba2afc05d6e78b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update file packages_list after sync test suite packages version with
upstream.
Check date: Feb 20, 2103
Bump up PR.
(From OE-Core rev: f43ba5e41ac5c1fe9d6e66fa1a1f8a51f9cd289c)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace incorrect size_t data type with socket length data type
(From OE-Core rev: c2d456cb79f42eefd50605d72361ded823568d1b)
Signed-off-by: farrah rashid <farrah.rashid@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00402802 ]
Remove the wildcard from the SRC_URI. This causes problems when you .bbappend
and add a FILESEXTRAPATHS entry. The unpack task may be unable to find the
files to unpack leading to an error.
Avoid wildcards at all costs...
Note, remove both man-1.5m2-multiple.patch and man-1.6e-lzma+xz-support.patch,
they were not being applied in the previous version. The later also fails to
apply when added to the SRC_URI.
(From OE-Core rev: 61b60906b2825d4f9ea1f5ae11e1f9fcc77ac4e7)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-Add-missing-argument-to-escape.patch: removed
- included in the new version
remove-gets.patch: not needed anymore
add-missing-argz-conditional.patch: added
- the Makefiles assume that the argz conditional
is present in configure.ac
(From OE-Core rev: a711a8617c39b06c9a494d0ceae9f96f65b024f9)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Readme update to indicate status of project and authorship
(From OE-Core rev: 6c6568e47d6b3b0edaba569bfa4e38f9d72b5122)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We shouldn't have an use-case where we'd use 'FUBAR' timezone so
instead of adding postinst handling for this use case we handle it at
install time and keep the Universal as fallback if user did something
wrong.
This also ensure the /etc/localtime file is kept as a symbolic link.
This will make timezone not available when /usr is in separated
partition (and not mounted) however the applications ought to fallback
to GMT timezone in this case and when /usr is made availble timezone
will work fine.
Change-Id: I9a4f05db7a0bdc06511deb5693d1d16569d2fc63
(From OE-Core rev: 4b5e1757224085deac54b2583853fc779dc70614)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code where mistakenly replacing the localtime file setting so we
end with a copy of file instead of a symbolic link. This fixes it so
now, we'll only do that in case the link is pointing to invalid data.
Change-Id: I16dfa5ea4f293c48bb396f4e23a2ea53e6c9e745
(From OE-Core rev: a9b42c8e85332a65788b1434f926186d4887b287)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
(From OE-Core rev: 84f083ac3a218513411e7c28edada7a80af8ad8c)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
(From OE-Core rev: 5e1a567872d6967ac4d5b78e9d226161d9651ded)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove manpage creation. It wasn't working because of help2man
missing when libidn is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
(From OE-Core rev: 46a4a696eec4d92beac1072fe6c64da1089c7cf8)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove manpage creation. It wasn't working because of help2man
missing when texinfo is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
(From OE-Core rev: 2c8cebdfd8102d4386b5d42a7fc30cc81e8e2ef2)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00394747 ]
The original patch removes endianness detection completely, causing lcms
to be built against the wrong endian. Instead, pass the correct endian
through the recipe using SITEINFO_ENDIANNESS.
(From OE-Core rev: 0a07ec7d13becc7ce87c502e75a006300a7090a5)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00389504 ]
Generated by building and running base/genarch.c.
(From OE-Core rev: 78a13ba170c1de6d7ef077854e3e34e18d17099f)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. it introduces bug in 64bit big endian process with __GLIBC__, At that
condition, size_t is 8byte, and the third parameter of getpeername is
socklen_t which is 4 byte. As a result, getpeername sees third parameter
is always 0, and can not return right value.
The similar program is below, the output is 0, not 9 on PPC64 cpu
main()
{
long aa=9;
printf("%d \n", *((int *)&aa));
}
2. The correct fix is to change getpeername/getsockopt/recvfrom.. last
parameter type from int to socklen_t, but to simplify, we can remove
size_t.patch, since the size of int is same as socklen_t in 32bit/64bit
cpu. and size_t.patch only change three places, there are other places
which uses int, and work well.
2. Fedora, redhat el4 do not use this patch, but Debian uses it, does not
find why this patch is written, maybe it is gcc legency issue which does
not exist.
(From OE-Core rev: 6c418ec278335c93692c2e19ec0b7b84b471e2b9)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
(From OE-Core rev: 0f8583e6fe729f8cacc8fec8c66a5c7f7c944947)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use CUPS_SERVERBIN to configure the CUPS directory
- the removed variables are not used anymore
Fix the following warning:
WARNING: QA Issue: foomatic-filters: Files/directories were installed but not shipped
/usr/lib64
/usr/lib64/cups
/usr/lib64/cups/filter
/usr/lib64/cups/backend
/usr/lib64/cups/filter/foomatic-rip
/usr/lib64/cups/backend/beh
(From OE-Core rev: 141621d956ea66a026b3571c3e0d30f1ab43961e)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the polkit will autodetect if systemd is available
and setup the configuraton accordingly, potentially
contaminating sstate.
In this patch systemd is explicitly enabled/disabled.
When enabled, polkit will use systemd for session tarcking,
otherwise it will use ConsoleKit.
(From OE-Core rev: 67c13656343d55ae9d1c79dcace5c79004c4c186)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The io_syscallX wrappers in syscall-mips.h discard error return status
by overwriting the value returned in v0 from the system call with -1.
Modify this behavior by returning the negative of the return value on
error (as identified by a3 != 0). This convention is consistent with
the behavior observed in syscall-ppc.h.
For a description of the MIPS system call interface, see:
http://www.linux-mips.org/wiki/Syscall
(From OE-Core rev: 0d8f50c33e5ff71dc17121b5c293718a8ad602bd)
Signed-off-by: Phil Staub <Phil.Staub@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Othereise it does not honor USE_NLS variable
and does not have proper dependencies. Which leads
to compile errors like missing liintl.h on uclibc
(From OE-Core rev: 606d1245cfa23bd51240af5112dc2e5257efbed1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Picking up a patch from gentoo and adding aarch64 defines
is enough to fix libaio and pass the harness testsuite
(From OE-Core rev: 7255c43b6e545a4c15c3cd57f6c240668a77786a)
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
building from shared state often ends up with
|
/b/kraj/angstrom/build/tmp-angstrom_next-uclibc/work/i586-angstrom-linux-uclibc/gawk/4.0.1-r1/gawk-4
.0.1/debug.c:4135: undefined reference to `rl_reset_terminal'
|
/b/kraj/angstrom/build/tmp-angstrom_next-uclibc/work/i586-angstrom-linux-uclibc/gawk/4.0.1-r1/gawk-4
.0.1/debug.c:4138: undefined reference to `rl_get_screen_size'
| debug.o: In function `unserialize':
Adding the missing readline dependency to fix such cases
where readline has not been populated in sysroot via some
other dependency and gawk would then use it or bail out.
(From OE-Core rev: 9a43a67993c21cedf6cf71138e3da9c691ebf4a7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc does not provide these functions so dont expect them
/usr/lib/libtirpc.so: undefined reference to `key_encryptsession_pk'
/usr/lib/libtirpc.so: undefined reference to `getnetname'
/usr/lib/libtirpc.so: undefined reference to `cbc_crypt'
/usr/lib/libtirpc.so: undefined reference to `ecb_crypt'
/usr/lib/libtirpc.so: undefined reference to `getpublickey'
/usr/lib/libtirpc.so: undefined reference to `key_gendes'
(From OE-Core rev: c66a269f6f68d670ca3bf9e7b22a5dce4bb95cd0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was only needed by libzypp, which has itself been removed.
(From OE-Core rev: 905f0d407a259f89e420ccdbee5a471cb0fea8f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was only needed by zypper, which has itself been removed.
(From OE-Core rev: 5c8169bd1c114aab76001a38ee4dd68d00d825e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Functionality provided by Zypper is now covered more effectively by
Smart (python-smartpm) which is now being used for package management
on the target when enabled and RPM packaging is selected.
Fixes [YOCTO #3349].
(From OE-Core rev: cc866433341532a0b5cf8cd5f67998960ea96499)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently hardware codecs are being injected in rather ugly ways and end up
either in no or all images. This adds a dedicated IMAGE_FEATURE for them based
on the MACHINE_HWCODECS variable. We may need to refine this in due course
but this patch at least illustrates the concept.
(From OE-Core rev: 1cb370587fd72e3f0f69678748108cc4116767fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This make screen/tmux/etc work as intended.
(From OE-Core rev: 58731bbdbd4ab4cfd560f14758a65efdfad2e28f)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 3a116ba892f63a690932d0aee454c15927ba0eca)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 9851d4bdf9283d280d8fc1302f5b744b6d792759)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: da826787f08adec6a3ec3995e7809b75df2c99c3)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 9aefa35859413a635fb4e122d59a703e95a9b5bb)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: bc36eadd5dee7390977629358cab3f13d6ddcf5c)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 029965a3e8263ec11d9a5f1bfbb8152ae4a1aea3)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
(From OE-Core rev: 074566f49be59b2f507ba427f258e1ca345da3c9)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
(From OE-Core rev: 9f4cca12f00327bb9a7070f305c36433ee732d7a)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xz contains a GPLv3 m4 macro which is used at build time, this does not make
the installed or runtime items GPLv3, which is what the LICESNE field pertains
to, therefor remove it from the LICENSE field.
(From OE-Core rev: d1950aaed812dc98d0536ec819c82b7a6160b316)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this patch, various procps tool can create "Unknown HZ value"
messages because internal initialization happens in a wrong, random
order.
It has been applied to classic already.
(From OE-Core rev: a746cf196792d1c0646f5e97e87055e0974d753e)
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Author of old code.google.com homepage lists polkit under heading
'former projects'. Newer versions are available from page at
freedesktop.org. Freedesktop.org homepage also points to SRC_URI
different from what we've been using. Latest version there is 0.109,
while latest version in old SRC_URI is 0.104.
(From OE-Core rev: 36fda78f7ef80a639bf5d760a611c3f2d0327b63)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This only builds alternatives, so avoids the libnewt and libpopt dependencies.
This uses 1.3.59 sources from git, with a couple commits of mine to add
--sysroot (and OPKG_OFFLINE_ROOT) support.
LIC_FILES_CHKSUM changed from 1.3.58 to 1.3.59, but only due to minor
formatting differences, not content/terms.
(From OE-Core rev: 7895540e02a563c107934572fdbf23fdf1661c91)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This buildsystem is not autoconf/automake, but make.
While we're at it, also make the install not hardcode the path to
/usr/share/locale.
(From OE-Core rev: 0e6f76d9d5929f8c23916827dccc8389419f0163)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only functions macros is installed, so no need to configure or compile
[YOCTO #3584]
(From OE-Core rev: fff3164c4b6a8c4ffa07bc6a26162c9e99c2531e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License change was due to update of Date.
Remove CVE patches as they where backports from this release
(From OE-Core rev: 9524c0ed85592c87ff30b54ca705b5d1b447eb6f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase some patches
(From OE-Core rev: 4cb22ea0beb952a5d70f83aaac415b7f2ecf3fd5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* when libnfnetlink is available (provided by
meta-networking/recipes-filter/libnfnetlink/libnfnetlink_1.0.1.bb
it's autodetected and utils subdirectory with pf.os is used.
* unfortunately there isn't configure switch to explicitly disable
libnfnetlink and it's also in different layer so we cannot add it to
DEPENDS
* it's undeterminitic, but pf.os is the only difference AFAIK, so not
worth patching configure switch
* fixes:
iptables-1.4.15: iptables: Files/directories were installed but not
shipped
/usr/share/xtables
/usr/share/xtables/pf.os
(From OE-Core rev: b789152b56ddbd6761989327cae558558401fd46)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the patch come from:
http://cups.org/strfiles/3914/str3914.patch
The gif_read_lzw function in filter/image-gif.c in CUPS 1.4.8 and
earlier does not properly handle the first code word in an LZW stream,
which allows remote attackers to trigger a heap-based buffer overflow,
and possibly execute arbitrary code, via a crafted stream, a different
vulnerability than CVE-2011-2896.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-3170
[YOCTO #3583]
[ CQID: WIND00299594 ]
Upstream-Status: Backport
(From OE-Core rev: c82517bb667484854eaa05b6e9efd9ee0f164fec)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the patch come from:
http://cups.org/strfiles/3867/str3867.patch
The LZW decompressor in the LWZReadByte function in giftoppm.c
in the David Koblas GIF decoder in PBMPLUS, as used in the
gif_read_lzw function in filter/image-gif.c in CUPS before 1.4.7,
the LZWReadByte function in plug-ins/common/file-gif-load.c
in GIMP 2.6.11 and earlier, the LZWReadByte function in img/gifread.c
in XPCE in SWI-Prolog 5.10.4 and earlier, and other products,
does not properly handle code words that are absent from the
decompression table when encountered, which allows remote attackers to
trigger an infinite loop or a heap-based buffer overflow, and possibly
execute arbitrary code, via a crafted compressed stream, a related
issue to CVE-2006-1168 and CVE-2011-2895.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-2896
[YOCTO #3582]
[ CQID: WIND00299595 ]
Upstream-Status: Backport
(From OE-Core rev: 0742b7aecaada435f90f39f26914906a5eb1fd4f)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ghostscript-native will check libtiff
automatically at configure time and libtiff
needs libjpeg. If libtiff and libjpeg is
just populated to staging native directories
and the host doesn't install them, the libjpeg
could not be linked, fail with:
|libjpeg.so.8, needed by libtiff.so, not found
|libtiff.so: undefined reference to
`jpeg_set_defaults@LIBJPEG_8.0'
|collect2: error: ld returned 1 exit status
Disable libtiff support to fix this issue and
modify configure to let disable system libtiff
could work.
We also explicity disable fontconfig, freetype,
cups for ghostscript-native to avoid the similar
issues.
[YOCTO #3562]
(From OE-Core rev: c00778dd0d9c3b62657057e92c868ad2257d72d3)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compile newt with python support. There may be packages that need newt's
python extension.
Add python to DEPENDS. And add patch fix_python_fpic.patch to compile
python .so module with flag -fPIC.
(From OE-Core rev: aa591ecb1aac1c0308c05dbac81bc056869a2c3e)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See https://qa.mandriva.com/show_bug.cgi?id=61419 for details.
(From OE-Core rev: 648cda68def82fa12b3af599c06caecdc7568668)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
the patch was imported from meta-mentor layer on yoctoproject git server
http://git.yoctoproject.org/cgit/cgit.cgi/meta-mentor as of commit id
333d2e0510a1e052cb83a6f8beed6d8bcea59b2c
Signed-off-by: Fahad Usman <fahad_usman@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compile libuser with python support and add python to DEPENDS.
(From OE-Core rev: 57114b3f631b66edf136bcc7ba23eec7c7bc9970)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the upstream status for patches of long building path.
(From OE-Core rev: 58b83f7dad8f0d252f8028349d734987081b7507)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the LFLAGS1 in the Makefile to remove warnings:
QA Issue: No GNU_HASH in the elf binary
(From OE-Core rev: 3b41513a63df6636b617eff09ff1ea9574c5e6f0)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License md5sum change due to:
- README is removed
- README.md contains license info
(From OE-Core rev: 3c93065cfb53edea920469c8bdfde1dcbf61ff2e)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the LINK_FLAGS in the Makefile to remove warning:
QA Issue: No GNU_HASH in the elf binary
(From OE-Core rev: 07501f14121a1882f26de66b4ca991392ab45dff)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lighttpd_fix_for_automake-1.12.patch: removed
- included in the new version
(From OE-Core rev: 6b87ac303c1f7357c9630359614b373082a59506)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes an issue where the shadow package was sometimes getting
installed before base-passwd during rootfs construction with Smart,
which meant the postinstall scripts could not find /etc/passwd and
/etc/group and failed as a result.
(From OE-Core rev: 6a660d39250cc635f7c1b6ae437f8fb40b7aec12)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the recent change of the libexecdir definition, the update-alternatives
for the libexec rmt broke. Fix this by moving rmt from libexec to /sbin. Also
split the rmt app from tar as it's likely not useful to many users.
(From OE-Core rev: cc5879ce75713506e76481f36d6e45dc3b31948c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the recent change of the libexecdir definition, the update-alternatives
for the libexec rmt broke. Fix this by moving rmt from libexec to /sbin. Also
split the rmt app from cpio as it's likely not useful to many users.
(From OE-Core rev: 487d58a98cd9fe4b368f0e7d119f8ff7ac852781)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add link files ${libdir}/lsb/{install,remove}_initd that they are
required by LSB tests. They were created by package lsbsetup, but
lsbsetup was dropped, so create them in chkconfig.
(From OE-Core rev: 268ede582e7b68854965b29a57e865b5fc7deb04)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If libxml-sax-base-perl is not installed on the target, libxml-sax-perl
would be fail to use. So add the recipe.
# cat > test.pl <<-EOF
#!/usr/bin/perl
use XML::SAX;
EOF
# perl ./test.pl
Can't locate XML/SAX/Exception.pm in @INC ...
Also inherit allarch for three perl modules.
(From OE-Core rev: 3230d943699c77f3fe9ce9d9949eae21d825186d)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "startline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 5037fef73e2c4d31b06a4422ad1d54f777fe00fa)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "startline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: c538673caafddbb208d9d18301e84a6a891d7844)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If TMPDIR has more than 256 chars, building ghostscript fails.
This violates the 410 length limit of TMPDIR.
This patch makes building ghostscript succeed by changing its
MAX_TOKEN from 256 to 512.
[YOCTO #2766]
(From OE-Core rev: 30a19b7c791abcbf09193c678866df66d470a6d9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't implement module onig in our recipes,
so we should explicity disable its invoke in slang
to avoid that slang's configure incorrectly tests
the existence of onig.
[YOCTO #2820]
(From OE-Core rev: 38c1b92f188b7e9b27d7ce3f6a8ffbdd7e19f90d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile makes use of CFLAGS_NOOPT. If we set that
when calling make we can enable options like -g. The
Makefile will override any optimization to -O3.
(From OE-Core rev: 7f26794dc9f2e78ee8aed1e23752acb709345c6f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile makes use of CFLAGS_NOOPT. If we set that
when calling make we can options like -g. The Makefile
will override any optimization to -O3.
Upstream-Status: Pending
(From OE-Core rev: df2c260f9cda2e291c72f7debe1e6d53846ce058)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add CFLAGS to EXTRA_OEMAKE to allow us control over
debugging and optimization.
(From OE-Core rev: 2e123bb1b3ee023a020798972821f32b1e0054e6)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EXTRA_OEMAKE in the recipe currently discards the
environment CFLAGS when setting CFLAGS passed to make.
We change that to include these options.
(From OE-Core rev: 67924616963fee9cb9f2405d93c74a8cc10b6eab)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsbsetup provides script LSB_Setup.sh to setup LSB test on image. But
script LSB_Test.sh provided by lsbtest replaces its function now. So
drop lsbsetup.
lsbsetup links /etc/localtime to HongKong zoneinfo file to make LSB
wcsftime test case pass(Yocto 1079). But the test case PASS without
this link, so remove the link.
Other 2 links are moved to packages lsb.
[Yocto 3278]
(From OE-Core rev: d991393207af90fe73de76f89ac6949ef291904e)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package lsbsetup has been dropped, so remove it from packagegroup
core-lsb.
(From OE-Core rev: 9b6ca9bd8dcf7e7d3eed9f0120a4ffcac80e441f)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because package lsbsetup is dropped, move the links created for LSB test
to package lsb.
(From OE-Core rev: 7659ad17799672d48c4d8614e830b7e60a1e971a)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENSE file was changed to match the BSD-2 Clause
(From OE-Core rev: 4b6a70e60790a32d89e2e5cdded4af83e9d303ae)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On hosts with FORTIFY_SOURCES, stringize support is required, as it's used by
the macros to wrap functions (e.g. read and open in unistd.h). Those wrappers
use the STRING() macro from unistd.h. A header in the bash sources overrides
the unistd.h macro to 'x' when HAVE_STRINGIZE is not defined, causing the
wrappers to generate calls to 'xread' and 'xopen', which do not exist,
resulting in a failure to link.
Assume we have stringize support when cross-compiling, which works around the
issue.
It may be best for upstream to either give up on supporting compilers without
stringize support, or to not define STRING() at all when FORTIFY_SOURCES is
defined, letting the unistd.h one be used, instead.
(From OE-Core rev: f7a25dd72d1d463eb72d48c6f9dd968d376496c0)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
(From OE-Core rev: 528b4ab831c7b0bc1412318d29e2b7f9cf711d57)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a generated file and gets removed by "make clean" which then
causes subsequent rebuilds to fail. Also, the content in this file
is taken verbatim from COPYING (which is already in LIC_FILES_CHKSUM)
so checking it for a second time doesn't accomplish much.
(From OE-Core rev: df7817649cc62bfef04a5c1aab97f7964e6bd76c)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the ltp scripts are perl, this was not seen in the
past because ltp is normally installed in an -sdk build with
perl already there.
(From OE-Core rev: 930216cb9092904642c0419d3475fc731ab0694b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If diffutils rebuilds it tries to remove with "rm" files that don't exist
anymore, resulting in an error.
Use rm -f so the removal always succeeds.
(From OE-Core rev: becd38412a95f3f9f6c3450a87a7204be032d2e6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* to keep ${PN}-locale from
bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"
(From OE-Core rev: 73252b16b501c0986b0ca0895e4534895a9ba3db)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
(From OE-Core rev: 2f3ebdfa5f42dae51063b043cc4b0fbe20b40064)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sysklogd recipe had a cut-n-paste version of the
update-rc.d.bbclass code which didn't work, but this was hidden
because all images contain the busybox version which does. Building a
busybox-free image unmasked the issue and syslogd wouldn't start on
first boot.
The comments seem to be wrong/stale. AFAICT update-rc.d and
update-alternatives work fine with each other, though there is an
ordering constraint (alternatives must be specified last, so it
"wraps" update-rc.d). This version builds and works both with and
without busybox.
(From OE-Core rev: 644673631bf57bd8d0e152b5fe7621344b5ad24f)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, if configure fails, it won't be able to run again as the directory
already exists.
(From OE-Core rev: 71a3ba536d022eea3a199cf4d6c5c791d91603a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
diffutils has a rather confused set of getext macros with different names and
strange conflicting version requirements. This patch removes the problematic
macros allowing it to 'gettextize' to the latest standard gettext code without
issue.
(From OE-Core rev: a40b89333652ca22a6e6957ab8a2a4e41b87b4c0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The environment CFLAGS is not used by the chkconfig
Makefile, so debug and optimization options are ignored.
So, we use RPM_OPT_FLAGS to pass CFLAGS into Makefile.
Upstream-Status: Inappropriate [configuration]
(From OE-Core rev: ecdb24c21b7b90b83748cbe5891437b2183321d7)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license for bzip2 is not quite BSD. I have an email out to the
maintainer to see if we can utilize a common BSD license (or something
else) however, for now, we should revert bzip2 back to a special
license.
As busybox also utilizes a lightly modified bzip2, this also
effects busybox.
(From OE-Core rev: a0b132798d2c1adf79414787b8317327a554f852)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors. Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.
(From OE-Core rev: acc988272b4e74a9ad1e6da5af5b2d208584197b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to libaio, libcap is another dependency of ltp.
If libcap has been done populate_sysroot but rpm/ipk package is not
created, ltp will be compiled with libcap. So when install ltp to a
image, it complains that package libcap is not found.
[Yocto #2973]
(From OE-Core rev: bf5215f095e7e610508fcefe1224c9289c6c56cd)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For start-stop-daemon, --make-pidfile is used when starting a
program that does not create its own pid file.
atd would create its own /var/run/atd.pid, so remove this option.
(From OE-Core rev: f10d236cda704cd91e185f8dc9c3f52461e2dad1)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the lsbtest's list file that we can download the latest
sub-packages of LSB suite 4.1.0 and then run the test with them.
(From OE-Core rev: a2f81aa58c4753412afc0227c34f08134b6a3d2d)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bash-3.2.48 did not provide the linking from sh to bash, making it unusable.
Moving the license part out of the bash.inc file, and into bash_4.2.bb file makes
us able to use that file also for bash_3.2.48.bb, which makes maintaining both
at the same time a lot easier.
(From OE-Core rev: e7b82cb4d107bfbfa5c939d406dd6ce6615b24e1)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_install needs command 'msgfmt', it would fail if the command
doesn't exist on the host, add DEPENDS gettext-native to fix this.
[YOCTO #2811]
(From OE-Core rev: f12f75aa57cacc73a0428cedba970076f0abb9f8)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These values need to be passed on the command line to "make install" otherwise
shadow will use its own built-in idea of where those directories are located.
(From OE-Core rev: 2b4b5f3259be4b790c098fc98cae0275ac6804a0)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The makefiles in the shadow package have their own hard-coded paths
for ${base_bindir} and ${base_sbindir} (known as "bindir" and "sbindir"
in shadow-speak). Ensure that they install into our paths rather than
their own.
Also check that ${base_bindir} and ${bindir} are different before trying
to move files from one to the other; likewise for ${base_sbindir} and
${sbindir}.
(From OE-Core rev: d4e62e164ef73b47c178edcbc2579f5358934afc)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB needs wget to download packages but wget provided by busybox doesn't
support some options such as '-N'.
LSB perl test 4.1.6-2 case all/tst_perlModPresent.pl,
../lib/Class/ISA/t/00_about_verbose and ../lib/Class/ISA/t/01_old_junk.t
fail because of lack of these modules, add them to make test pass.
File CORE/config.h which is provided by perl-dev and file
unicore/version which is provided by perl-doc are required by LSB perl
test cases.
Add perl-dev and perl-doc to packagegroups-core-lsb.
[Yocto #3030#3031#3052#3054#3055]
(From OE-Core rev: ac4a60a1c585bfe5bdce1556303d49bef2594070)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Rebased for packagegroup change -sgw
These perl libraries are being added directly to OE-Core for 4.1
LSB Complainace, when 5.0 comes out early next year (2013), we will
remove these changes.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update package lsb version to be same with current lsb test suit
version. Because when install the suit, it warns that need lsb
version >= 3.0 at least.
Drop the duplicated creating files under /etc/lsb-release.d.
Provides directories /etc/opt and /var/opt that they are required by
package lsb-dist-checker in lsb test suit.
(From OE-Core rev: 973e615ab4ee325ab568f84e001a5724f4b0dd01)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to latest version 20120903
(From OE-Core rev: e14a9921928c774d1817704a0a606d3ac7e4f989)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm can't use the "-" as the arch, which causes problem, e.g., when
MACHINE = "beagleboard":
* The arch should be armv7a-vfp-neon, but rpm only takes the armv7a,
this is incorrect since it is mixed with real arch armv7a.
* The nativesdk's arch should be i686-nativesdk (or x86_64-nativesdk),
but rpm only takes the i686 (or x86_64), this in incorrect since it is
mixed with the arch i686 (or x86_64).
Replace "-" with "_" when rpm package and the rootfs generation would
fix the problem, I think this is fine since it doesn't change the tune's
arch, the package manager doesn't care about the arch's name, but it
needs a unify arch system to avoid confusing. This is similar to what we
have done on the deb which fixed the arch i486, i586 and so on to i386.
[YOCTO #2328]
(From OE-Core rev: fc985f511da86400e4fa7d17555216c12eb51666)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are needed to support upgrading from task-* to packagegroup-*
within existing target images at runtime.
Note: these settings will very likely be moved to a separate inc file
at some point in the future.
(From OE-Core rev: 1b07bd4c6b1ff70267b97f94b25026a8f8ad3314)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If libidn is just populated to sysroot but rpm packages are not created,
build ghostscript will check libidn automatically and then depends on
libidn. But package libidn doesn't exist, so build image which contains
ghostscript will fail with:
| error: Failed dependencies:
| libidn11 >= 1.25 is needed by ghostscript-9.05-r2.i586
| libidn.so.11(LIBIDN_1.0) is needed by ghostscript-9.05-r2.i586
| libidn.so.11 is needed by ghostscript-9.05-r2.i586
Disable libidn support to fix this issue.
(From OE-Core rev: 509eb624c89249ff169de24fed448e8d7894a6f6)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When libidn has been populated to sysroot but rpm packages are not
created, build msmtp will check libidn support automatically and then
depends on libidn. But package libidn doesn't exist, build image which
includes msmtp will fail with:
| error: Failed dependencies:
| libidn11 >= 1.25 is needed by msmtp-1.4.24-r3.i586
| libidn.so.11(LIBIDN_1.0) is needed by msmtp-1.4.24-r3.i586
| libidn.so.11 is needed by msmtp-1.4.24-r3.i586
Disable libidn support to fix this issue.
(From OE-Core rev: a304789cecb1a6ffa3c5a56f617eea4a5ac29a98)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a build issue with wget idn support. When libidn has been
populated to sysroot but rpm packages are not created, wget checks libidn
support automatically and then depends on libidn. But package libidn
doesn't exist, build image which includes wget will fail with:
| error: Failed dependencies:
| libidn.so.11 is needed by wget-1.13.4-r14.3.core2
| libidn.so.11(LIBIDN_1.0) is needed by wget-1.13.4-r14.3.core2
Disable iri/idn support to fix it.
Signer-off-by: Kang Kai <kai.kang@windriver.com>
(From OE-Core rev: 48a11f8dc9f70cfc205f558b4dc959c8b4d5e0cd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License checksum change due to the modification of the pre-compiled
binaries section (no change in the license part).
(From OE-Core rev: a0bfc2e014220ac97e7cd88c9579d5bcb2b1024b)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow references to the old task packages to continue to work. This does
not add RPROVIDES for everything, just those packages that are likely to
have been referred to.
(From OE-Core rev: b41c45972a6d359f034615471959c84aee2bc456)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set a more appropriate DESCRIPTION and remove commented-out line.
(From OE-Core rev: 22b4ba34ad8c08b1a97e56cdc567799f1e1460ef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create package groups covering the Core, Desktop, Runtime Languages
sections of the LSB specification 4.1. Most of the packages were just
moved around or copied in from packagegroup-core-basic (which is
currently included in LSB images anyway) with the eventual aim of
having the LSB package groups be completely independent as well as
following the specification as closely as possible.
(From OE-Core rev: 61b134fd082b4ca2866b98655c5fc3a275834464)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove packagegroup-core-basic-rpm - we already have a mechanism for
ensuring that packaging tools are installed on the target if desired;
we don't need a package group to bring them in as well (especially if
packagegroup-core-basic is used with other packaging systems).
* Remove the poorly-named packagegroup-core-base-utils: we already get
busybox via packagegroup-core-boot.
(From OE-Core rev: e7abf8437c7128e8541411213d262137520456a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides one package group, packagegroup-core-apps-console, which
is usually brought in by adding "apps-console-core" to IMAGE_FEATURES.
Aside from the naming inconsistencies, this is a group of mostly
unrelated packages, none of which are actually "apps". Handling each
one:
* dbus: should mostly be brought in by package runtime dependencies
* avahi-daemon: if you are using packagegroup-base (as all images that
inherit from core-image do) this is brought in by having "zeroconf" in
DISTRO_FEATURES.
* portmap: not very useful by itself; should be brought in by selecting
NFS server/client through other means.
* psplash (or whatever SPLASH is set to): this has been changed to be
an explicit item "splash" in IMAGE_FEATURES. Since this is a fairly
fundamental feature, a piece of code has been added to automatically
handle this for images still using apps-console-core (and show a
warning).
(From OE-Core rev: 592d6e602466628d10704835a7b07d3d713f58e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since package groups don't actually fetch or distribute anything and we
no longer run do_configure we don't need to set this variable anymore.
(From OE-Core rev: 4c511f77e38cbc9d8d633fef3b1ab4cf93440258)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also clean out items already handled by that class (dev/dbg packages,
ALLOW_EMPTY, etc.)
(From OE-Core rev: 65fca4458cfe1d647c7ea1d4588dc449739a73eb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lots of code (such a GLib) expects this to exist and link to the current
timezone definition.
/etc/localtime is a symlink instead of a copy of hard link to make it obvious
what timezone data it's pointing at. For systems with /etc on a separate
filesystem to /usr this will result in a dangling symlink until /usr is mounted,
but as this is early boot the assumption is that anything checking it will
handle that case and fallback to UTC.
(From OE-Core rev: efe305c275f288e248655f3a8b266f86c9893f73)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data files are compiled to a binary but architecture-independent format, so
this package can be allarch.
(From OE-Core rev: 23bf856215fa7c34a71d6086ee355f7c0672dbab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When libaio has been populated to sysroot, ltp will be compiled with
libaio. If rpm/deb package of libaio doesn't be created, bitbake
core-image-xxx will fail with:
| Processing task-core-apps-console...
| Processing ltp...
| error: Failed dependencies:
| libaio.so.1(LIBAIO_0.4) is needed by ltp-20120614-r0.i586
| libaio.so.1(LIBAIO_0.1) is needed by ltp-20120614-r0.i586
| libaio.so.1 is needed by ltp-20120614-r0.i586
| ERROR: Function failed: do_rootfs
Add libaio to ltp dependency to fix this issue.
Similiar to [Yocto #2973]
(From OE-Core rev: 4945eafb7dd0d9e59760fdfad98982937be27517)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since no lmsensors recipe exists by default in oe-core, explicitly disable
support for it in sysstat. In my case sysstat would fail linking complaining
about undefined references when adding my own lmsensors recipe.
(From OE-Core rev: 686a2b5201aa5ebe46162a0ad9d60d87c63486e0)
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remove-gets.patch: removed
- included in the new version
(From OE-Core rev: 396af9e2c8a8b7ad8d49566350d79f05898734a7)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The task-core-lsb-runtime-add subpackage includes eglibc-pic as an
RDEPEND. That's incorrect, eglibc-pic is nothing but 22MB of static
libraries and should never appear as a runtime dependency.
(From OE-Core rev: 79545d068659c943ac9aa925a7da0eee82207b8b)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With pseudo the cmod in pkg_postinst is actaully redundant since
the do_install uses install -m 4555 and pseudo is able to track that
between the install time and the rootfs package installation, so the
perms are correct.
[YOCTO #2894]
(From OE-Core rev: a2bc81032c85548f7c72dc76e6020ab4df9af6de)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensure a reliable built without host contamination, this
will also disable the usage of ghostscript.
[YOCTO #2966]
(From OE-Core rev: 90bccaa290d2bc04c7ea1bbeb2cddb3509d0d380)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default man.conf is named wrong and doesn't work. It references gtbl, while groff installs tbl and other things. This man.conf is imported from OE classic and runtime tested on angstrom.
Before:
root@beaglebone:~# man man
sh: /usr/bin/gtbl: No such file or directory
sh: line 0: echo: write error: Broken pipe
gunzip: write: Broken pipe
gunzip: error inflating
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
After:
root@beaglebone:~# man man
MAN(1) Manual pager utils MAN(1)
NAME
man - an interface to the on-line reference manuals
SYNOPSIS
man [-C file] [-d] [-D] [--warnings[=warnings]] [-R encoding] [-L
locale] [-m system[,...]] [-M path] [-S list] [-e extension] [-i|-I]
[--regex|--wildcard] [--names-only] [-a] [-u] [--no-subpages] [-P
pager] [-r prompt] [-7] [-E encoding] [--no-hyphenation] [--no-justifi-
cation] [-p string] [-t] [-T[device]] [-H[browser]] [-X[dpi]] [-Z]
[[section] page ...] ...
man -k [apropos options] regexp ...
man -K [-w|-W] [-S list] [-i|-I] [--regex] [section] term ...
man -f [whatis options] page ...
man -l [-C file] [-d] [-D] [--warnings[=warnings]] [-R encoding] [-L
locale] [-P pager] [-r prompt] [-7] [-E encoding] [-p string] [-t]
[-T[device]] [-H[browser]] [-X[dpi]] [-Z] file ...
man -w|-W [-C file] [-d] [-D] page ...
man -c [-C file] [-d] [-D] page ...
man [-hV]
Check for config name:
root@beaglebone:~# rm /etc/man.config
root@beaglebone:~# man man
Warning: cannot open configuration file /etc/man.config
No manual entry for man
As a bonus a bunch of references to the buildhost get removed from the config file.
(From OE-Core rev: edff7ae2d2fbd9ccc69645f9f86f3b9d0a53cb23)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yocto #2926: syslog.conf should not have tabs within the selector field.
Removed tabs from the selector field of syslog rules. Tabs or spaces
should be used, in syslog.conf, only when separating selectors from
actions.
(From OE-Core rev: 1316be4e597332a629842b3f5a7dde8e45dd057d)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'at' needs flex to generate source file lex.yy.c, but it doesn't
depend on flex-native directly; This maybe cause a do_compile
failure if flex-native is not built or included in project.
Error message is:
error: lex.yy.c: No such file or directory
Get 'at' depends on flex-native to fix this potential issue.
[YOCTO #2919]
(From OE-Core rev: f5a722a1db6315ba945c41551c60b1ef2c8b647f)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This problem appears on F17 when configure finds /bin/perl, since the beh
script is a target side script, we need to set PERL in the do_configure_prepend
in order for the correct perl to be used
(From OE-Core rev: 5290e82ecef08b5e573d7442627276d7b42c6b93)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
iputils drops a /bin/arping with a runtime linkage against libsysfs in
/usr. Port Fedora 17 iputils-20071127-infiniband.patch, which inlines
access previously done by libsysfs.
(From OE-Core rev: 99c482124e9f476923f6d5cf0a9e5551507f9d14)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was checking ways to make incremental builds faster so I started using
sstate-cache and SSTATE_MIRRORS. But this gave me some nasty bug:
| Collected errors:
| * satisfy_dependencies_for: Cannot satisfy the following dependencies
for php-cgi:
| * libtirpc1 (>= 0.2.2) *
| * opkg_install_cmd: Cannot install package php-cgi.
I checked details:
In my previous build libtirpc got built before libpam so libpam found it
and linked. As a result packages depend on libtirpc1 but as there is no
such build dependency sstate handling code did not used libtirpc copy...
(From OE-Core rev: e629bdcd1bcb51f2d2101fb53daeac0bd29ab637)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 8b94cd639c02bcc653312575592673c36df0ec92)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 3fce22d81cc27629c7c3fd4c174b68c8ced468cf)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: e044be34601dcc8eeca7f96d628964bebf562e2e)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 7b77d4372ace6aa2400e3328875b39b4f67476d0)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 7556e60bf23c07646594a1704b3db7dfc29e631d)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to remove the docdir worksarounds and fixes other
potential relocation issues at the same time as cleaning up the
recipe.
(From OE-Core rev: 3be575babcdb12f95f4882d3c42bdf3ba1ec1900)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: f8f33550f5cc263673cbd481a567116514603b8d)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 7b13be661c869eb4bf88d16a928a97edd5bc203b)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 0a8003a3542d17332488ca715619990b222ceb71)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: a9c73d9d3dd5f7fbee82d7ed3cb88a80aa3cbfbd)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 84fd332ab2f2c512109fc0a080d03533883fa235)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 6f0eebbd12d79a86dd4a79f87b6be4758439a3f5)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sourceforge.net link is broken at the time of this patch,
so I added a mirror.
License changed to GPLv2+
(From OE-Core rev: 1452b5e60eff29e7423ecdd51d2d942e88dcc263)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 2726]
The patch of converting char type to signed char is only applied to arm,
in fact it should be applied to powerpc too since powerpc has the same
assumption for char type. To x86 and mips, this patch has not impact.
(From OE-Core rev: 8c6a9bd7b4fea62b5765caecad660d372379e412)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
follow Richard's approach, modify bzip2-native recipe to install bzip2 package
binaries to STAGING_BINDIR_NATIVE/bzip2-native to avoid problems when other
package is doing upack to reference bzip2. libbz2.so* still installs to
STAGING_LIBDIR_NATIVE.
change python-native to depends on bzip2-replacement-native instead of
bzip2-full-native and add EXTRANATIVEPATH for bzip2-native.
Didn't add bzip2native.bbclass as python-native is the only user so far.
(From OE-Core rev: 5bf3541836457465aa76577bfb41cdf6316213c9)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2826]
m4/nullsort.m4 tries to find sort dir, and write it to updatedb,
but nullsort.m4 is checking the host dir. Once the sort dirs on
target and host are different, updatedb will fail due to wrong
sort dir.
Since we always have sort under ${bindir}, so we can assign it
directly.
(From OE-Core rev: 05c3c327370971eaa9d872a88782278126030229)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2820]
when check if there is pcre, the configure file always check
the host dir. now we make it work by adding correct prefix for
cross-compile environment.
(From OE-Core rev: 18481095d237c84aef5cfb55b651443fed538550)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update ltp to version 20120614 and update license files at same time.
Remove the patch because it has been merged.
(From OE-Core rev: 6b3c2aa5a32d7d21f9ac760dc7aa18829c03a875)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ppc64 uses lib64 and usr/lib64 for library paths
so we need to train cups build system
(From OE-Core rev: c8de655e8f5b2ac8b72428252645022458460912)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rootfs has 'users' group at number 100 and without this fix it
would assign to a non-existent group and if a group with gid as 1000
is created later it would own all files for users created.
(From OE-Core rev: a67d77d25cbab0d88b9ff76e3f28429d4ac4f34b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rootfs has 'users' group at number 100 and without this fix it
would assign to a non-existent group and if a group with gid as 1000
is created later it would own all files for users created.
(From OE-Core rev: e06414092c7aa4fce1173f00e610a33a0deca9cd)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the installation process so we have bashbug in ${bindir} and
bash at ${base_bindir}.
(From OE-Core rev: f2dc23cf886de95040080c4398a3320c211b65fa)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many recipes are now having to define PERLPATH and PYTHONPATH variables.
Creating USRBINPATH in bitbake.conf means we can remove all these lines
from the many recipes now needing this and simplify the code changes
needed in each case, reducing the chance of errors being introduced.
Also fixup glib python binary location issue and fix function indentation.
(From OE-Core rev: cf63d9068c3a8c635dfc240d30dfff278be9b0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2755]
When watchdog works on ping mode, the system will be rebooted since
watchdog can not receive the expected ECOREPLY on a setting interval.
Ping mode uses a raw socket to send a ECO packet, then uses select()
to wait and recvfrom() to receive the ECOREPLY packet, if select()
shows the data is ready, and the data is not the expected ECOREPLY,
and waiting time is not overdue, it will continue use select() and
recvfrom().
Problem is that the raw socket can receive any icmp packets, if we do
not set filters, and there are many icmp packets on socket, this
program will not find its interested ECOREPLY packet in a special
interval, which makes the ping mode fail.
Other program is that watchdog sometime can not reach the call of
recvfrom to try to receive packets since tv_sec of struct timeval
of select parameter is 0.
The timeout of select() is the result of ping interval minusing the
time of calling gettimeofday spending, when ping interval is 1 second,
and the call of gettimeofday() spends several useconds, the tv_sec of
struct timeval of select parameter must be 0, at that condition, we
should think it is valid of tv_sec of struct timeval of select parameter
be 0
(From OE-Core rev: 90f3a90413aa1e08c3206b838dcaee0c1c640dc7)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
automake has depricated use of @mkdir_p@, Fix the
issue by using @MKDIR_P@ instead.
added a new patch:
sed-4.1.2_fix_for_automake-1.12.patch
(From OE-Core rev: b5e9b6db49770261e8394e676eec603125b51a44)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
automake 1.12.x automatically deletes empty directories, so
the additional rmdir from the do_install_append fails.
cleanup the do_install_append for automake 1.12.x
Avoid this error:
| rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/tar-1.26-r1/image/usr/sbin/': No such file or directory
NOTE: package tar-1.26-r1: task do_install: Failed
no PR bump as no change in the output.
(From OE-Core rev: c3c103abb533cc9aae178d41b1bd216165f3bc9a)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new patch
avoid_AM_PROG_MKDIR_P_warning_error_with_automake_1.12.patch
More details in the patch headers.
(From OE-Core rev: c654e26007b4b014bc614fde15b7a8d9cf52d849)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pam_unix_acct.c: In function '_unix_run_verify_binary':
pam_unix_acct.c:97:19: error: storage size of 'rlim' isn't known
pam_unix_acct.c:106:19: error: 'RLIMIT_NOFILE' undeclared (first use in
this function)
pam_unix_acct.c:106:19: note: each undeclared identifier is reported
only once for each function it appears in
(From OE-Core rev: e59a0bac95ce025a6b826be28ccc9e42ca4b5a29)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes use gnulib which needs this change to use gets
when its defined and not otherwise. Until that change goes into
gnulib and then all these package upgrade gnulib in their sourcebase
we patch them
(From OE-Core rev: 3148460575b65cb681065e5850b8afb96056d712)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc 2.16 has removed gets so we account for that
(From OE-Core rev: bd47833dea9e1b39ca19b02f06ba9194c6d52be8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsof tries to compile a temp c source file and execute the binary to
determine linux C library type (file Configure, line 2689-2717).
It is inpracticable for cross-compilation and may have build issue on
some distros since it depends on host settings.
Fix below error when building for 64bit target on 64bit host:
[...]
| dsock.c:481:44: error: 'TCP_LISTEN' undeclared (first use in this function)
| dsock.c:482:45: error: 'TCP_CLOSING' undeclared (first use in this function)
[...]
| make: *** [dsock.o] Error 1
The actual issue exists in do_configure:
[...]
Testing C library type with cc ... done
Cannot determine C library type; assuming it is not glibc.
Which is in turn caused by missing 'gnu/stubs-32.h" when compiling
the temp c source file on host:
[...]
fatal error: gnu/stubs-32.h: No such file or directory compilation terminated.
file gnu/stubs-32.h is provided by 32bit glibc.
(From OE-Core rev: fbf22dfe1a0dca3fc7ac56e4fd274c0145efbc70)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This contains bugfixes from the 5.0.3 and 5.0.4 releases
(From OE-Core rev: bbdbb70192e16fe351f9cf8f781110faf839be51)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix [YOCTO 2726]
C language has 3 distinct char types:
char
unsigned char
signed char
A char has the same range of values as signed char on X86,
but same as unsigned char on ARM which made Slang's typecast()
and array_sort() unable to work for char value on ARM, since
Slang is assuming "char" as "signed char".
Now we change "char" as "signed char" explicitly in
util/mkslarith2.sl, and use it to regenerate src/slarith2.inc
(From OE-Core rev: 0a1d842e2db63265a6a6708b1101e1f52f223fc9)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace the usage of EXTRA_IMAGE_FEATURES in a small number of .bb
files with IMAGE_FEATURES, and leave the use of EXTRA_IMAGE_FEATURES
for developers in their local.conf files, to avoid the possibility of
undesirable side effects.
(From OE-Core rev: 347fc6e82a3d1c1ac7dbabd9e5cdd08abd864bfb)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2133]
Increase ALTERNATIVE_PRIORITY of file functions to be higher than
the value in package initscript. Then when lsbinitscripts installed,
file functions provided by lsbinitscripts will be used.
(From OE-Core rev: 33f9abed7658bd5eae39e987b210651d202e1f4e)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ppp-watch requires it.
x86_64-poky-linux-gcc -m64 --sysroot=/intel/poky2/builds/fetch/tmp/sysroots/qemux86-64 -O2 -pipe -g -feliminate-unused-debug-types -Wall -D_GNU_SOURCE `pkg-config glib-2.0 --cflags` -c ppp-watch.c -o ppp-watch.o
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib-2.0' found
ppp-watch.c:78:18: fatal error: glib.h: No such file or directory
compilation terminated.
make[1]: *** [ppp-watch.o] Error 1
make[1]: Leaving directory `/intel/poky2/builds/fetch/tmp/work/x86_64-poky-linux/lsbinitscripts-9.03-r0/initscripts-9.03/src'
(From OE-Core rev: 488610f4a5b7591a989ff1a6137f276a85fd7a85)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While sdk images already have dev-pkgs included, the kernel-dev package
is special and does not get installed. Add kernel-dev explicitly to the
*sdk image recipes.
Note: We have to be careful with "IMAGE_INSTALL +=" as it must appear
after "inherit core-image" which makes an "IMAGE_INSTALL ?=" assignment.
(From OE-Core rev: 337428316de3612a8e1efa70b3a4ba7cb6e058d2)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Jessica Zhang <jessica.zhang@intel.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LIC_FILES_CHKSUM updated due to trivial copyright date change.
(From OE-Core rev: 373e4fef7b4687a875a24c2c51a89fe2f251a4a9)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LIC_FILES_CHKSUM updated due to trivial copyright date change.
Use new update-alternatives syntax.
(From OE-Core rev: 570788854be1372b095d5dd1ad0549e26c8e8992)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, xinetd cannot start if no service enabled.
# /etc/init.d/xinetd start
# ps aux | grep xinetd
# cat /var/log/syslog
xinetd[862]: 862 {init_services} no services. Exiting...
So add -stayalive option by default, as most distos do.
(From OE-Core rev: 53b6da085bfa78885f68b5d7db40d8c4e3f2f5bb)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
