Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
(From OE-Core rev: 0623a0e1bd7cf0c405a0469e9f16779971c0c3b5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
(From OE-Core rev: 5acfced041477d8c272485196e87ad601a0ce5b4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I mistakenly named the allarch opkg repo the same as nativesdk one...
This patch fixes it.
[YOCTO #5181]
(From OE-Core rev: 98f39b0ae4ed45194a165de3913f27745481cb7a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, adt-installer allows only the installation of qemu target
sysroots.
The changes in this patch do the following:
* add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for
each target architecture. For example, for arm we can choose to use a
qemuarm sysroot or a beagleboard sysroot. By default, only the qemu
target sysroots are selected (current behavior);
* change adt_installer scripts to allow installing the correct
meta-environment package for the selected machine;
* remove some left-over commented lines;
* use packagegroup-cross-canadian-${MACHINE} when installing the cross
canadian packages instead of doing it separately for each package;
* change the opkg config files in order to be able to find the
packagegroup package, which is allarch;
[YOCTO #4783]
(From OE-Core rev: 02085d410bf734e833d45293f4d5b06bb9536a60)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If one specifies a relative target sysroot path, then he/she must always
be in the same directory in order to be able to compile.
With this patch, adt_installer will automatically convert user
supplied relative paths to absolute.
[YOCTO #4955]
(From OE-Core rev: 1abf13cb035fa9e02f0c6a1c6f3524b649d2a701)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old way find -perm +mode is no longer supported in newer
versions of find (Fedora 19). Man page says:
-perm +mode
This is no longer supported (and has been deprecated since
2005). Use -perm /mode instead.
[YOCTO #4853]
(From OE-Core rev: 21b079e01873e2fb4d8674541e8c5818ba73554e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user doesn't have rights to access the installation directory,
the sdk installation will fail, add sudo to fix this.
[YOCTO #4760]
(From OE-Core rev: 040010d04672c93f18d60308ecf3c26a26ec5fd3)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
[YOCTO #4758]
(From OE-Core rev: 487d1fa7b79e89518494986461c157bace842613)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl module for automake has an embedded path in it, this needs
to be relocated.
Older versions of 'file' do not return the "ASCII" text in the output for
a perl module file. Hence, the regex pattern didn't match perl module and
they were not getting relocated at all on older distributions.
1) On CentOS release 6.4, the version of file is 5.04
$ file /usr/lib/perl5/Config_heavy.pl
$ /usr/lib/perl5/Config_heavy.pl: Perl5 module source text
2) On Ubuntu 13.04, the version of file is 5.11
$ file /usr/lib/perl/5.14/Config_heavy.pl
$ /usr/lib/perl/5.14/Config_heavy.pl: C source, ASCII text, with very long lines
[YOCTO #4550]
(From OE-Core rev: 7cfab2c895bf4daa7716fb7509e367bf74f016e4)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Spaces are not handled properly in some parts of oe-core and it's safer
to abort toolchain installation if path contains spaces. Even though
we fix space handling in the toolchain installation script, there are
various other parts in the toolchain (perl scripts, sysroot path passed to
toolchain binaries, shebang lines) that would need special handling. So,
for now, just bail out if path contains spaces.
The checking for spaces in the path is done after expanding relative
paths to absolute and tilde conversion.
[YOCTO #4488]
(From OE-Core rev: 8c35ba2d3048ce69f74f72cb2676e4bc162cfb63)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches and .pc directories should not be shipped since the patches
were already applied. So, remove these 2 directories.
[YOCTO #3983]
(From OE-Core rev: c18a4bded48ed1f8fd39e1741beb2a3452ae43e3)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are various usages of ALLOW_EMPTY with no packages specified. This
is not recommended syntax, nor is it likely to be supported in the future.
This patch improves the references in OE-Core, either removing them if they're
pointless (e.g. when PACKAGES="") or specifying which package it applies to.
(From OE-Core rev: fe81bd4f600877e63433184cfc2e22c33bb77db6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, do_rootfs has a dependency on all the do_package output being present
due to its usage of the pkgdata directories. This means that if you run:
bitbake xxxx-image -c rootfs
you end up having to fetch and unpack all the do_package data which is usually
large and inefficient. It also means rm_work has to leave all the do_package
data lying around so rootfs works.
This patch splits the actual creation of the pkgdata directory off into a separate
task, "packagedata" which happens immediately after do_package. We can then remap
the dependencies so this task is depended upon, not do_package. Sstate can then be
programmed not to require do_package at the appropriate times.
Whilst this patch doesn't do so, it opens the possibility of rm_work wiping
out the do_package output from WORKDIR as long as it also removed the do_package
stamp (both normal and setscene variants) and allowing more space savings
with rm_work which has been regularly requested.
(From OE-Core rev: 6107ee294afde395e39d084c33e8e94013c625a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch addresses an SDK installer issue on older distributions if
the installation takes place in another directory than the default one. In
fact, is all about the 'file' utility version used for determining if a
file is a text file. For example, for a perl script, newer 'file' versions
return:
"...script, ASCII text executable"
while older versions return:
"...script text executable"
Hence the regex pattern didn't match the scripts.
Also the patch contains two unrelated minor fixes:
* return an exit code of 1 instead of -1 when installation machine is
not supported. That because on an older distribution we also get this
error message: "exit: 9: Illegal number: -1";
* remove unnecessary $SUDO_EXEC prefix to grep;
[YOCTO #3538]
(From OE-Core rev: e7e23a1e5aae4028e21e37ec09e9d431a9adfbcb)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed if installation is done in a directory that needs root
privileges.
(From OE-Core rev: 28823486ba8ce4d88bbad3cea696ce9fba0cc165)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
[YOCTO #3090]
(From OE-Core rev: 6e4923c0c9b218271fd44d78df9987b5cabb1c03)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the installation is done in a directory which already contains a
valid installation, opkg will not install anything and the moving the
contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will
throw some errors. However, the install directory will not be affected.
This patch will ensure that the /install/dir/opt/poky/1.2 exists.
(From OE-Core rev: 1cd01533cbec0e9ed61bbd33ecdf5dc306a32eec)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
[YOCTO #3102]
(From OE-Core rev: 9e6a25e2e9a7f37c3baa0b2949a43ac4127868da)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the cross canadian toolchains are installed, for different
architectures, they might contain common files. This leads to
installation failures since the opkg, by default, does not overwrite
files. This issue happens, for example, for binutils packages (that
contain the same locale files) or gdb (which installs some syscalls xml
files). The locale files could be removed from the binutils
cross-canadian package but we cannot do the same for the syscalls GDB
files which are used by GDB to display user friendly names for the
syscall numbers. Hence, the best solution is to force opkg to overwrite
these files.
[YOCTO #3109]
(From OE-Core rev: 3396545467df05421c3adeb4b5ec532fa95dcb06)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTOADT_REPO within adt-installer.conf was hardcoded to
http://adtrepo.yoctoproject.org/${SDK_VERSION}
This allows it to be overriden in local.conf by setting
ADTREPO = "http://adtrepo.yoctoproject.org/${SDK_VERSION}"
I'm also fixing a bad rm in do_populate_adt. The file name
that is being rm'd is wrong.
(From OE-Core rev: 610f8c0c0cab8e258919689fd641faec28b58caf)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a few places, we have scripts which use <rootfs>/var/pseudo for
the pseudo state directory controlling a given filesystem. This
seems possibly risky because it means that stuff running under
qemu or whatnot could wipe out the data being used to handle that
rootfs. Move this to:
<rootfs>/../$(basename_rootfs).pseudo_state
to avoid problems.
This also solves at least one case (not directly hit by yocto's
tree) wherein you could end up trying to remove a rootfs while
pseudo was using a database inside that rootfs, and thus the
remove would fail.
(From OE-Core rev: aa5d6bd006d3b4eede21d8987451876ed3385ab8)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we made the SDK relocatable, we have to add this functionality to
adt-installer too.
(From OE-Core rev: 0fa784c261050c632b7237ba3d43a148ab71b0ca)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adpated to the new environment file name for powerpc, due to the oe-core
commit c2d96179.
Fixed bug [YOCTO #2055].
(From OE-Core rev: bebcac5e6eaceb7bdafa6432e42fe8073a42c6d2)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2055]
1. Corrected the wrong environment file name for powerpc.
2. Removed unnecessary variables in adt_installer.conf.
(From OE-Core rev: 9c52fe75b7f77feda075e9c5296448dea6ff7922)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
(From OE-Core rev: 960ee8076e860353a05eb2eb7f825a455c54698d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1909]
Install autoconf-nativesdk and automake-nativesdk to host.
(From OE-Core rev: 0b3842f5c3c1587d25e70bc8223e2b144b9043cb)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1380] Removed the hard coded repo url in opkg configuration
files.
(From OE-Core rev: 125eae393a3448e1ff5f3c2cf782ed7b3aa23920)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake now allows the umask to be specified per task. The
following tasks will have a umask of 022 set by default:
do_configure
do_compile
do_install
do_package
do_populate_sysroot
do_rootfs
do_configure and do_compile need a umask of 022 set because -many- recipes
directly copy generated files out of recipe's build directory. Instead of
fixing each existing and future recipe, it was shown to be much easier to
just set the umask.
(From OE-Core rev: 0cfa7ebcf661aa0645c6d4d858b04946ebacb7e4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in this case, those non poky distro can also use these recipe normally
(From OE-Core rev: 0a57bd226cdb8332707fa0f46fcf0b067f03701a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is for fixing the x86-64 image name bug and also,
do_patch must be done before do_deploy.
(From OE-Core rev: 95e27a0f604796b30d7e7e1d58d0925942cfefa9)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for ipk files on ppc, the name should be powerpc. So does the
environment file name. For the tar file name, it should be ppc.
This patch is to correct the arch/machine name pair.
Related Bug#864
(From OE-Core rev: 9b94486c6cc7295ed872e3c03ea297c3f3c7dcdf)
Signed-off-by: Liping ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We found some proxy server has wrong cache for long http file name.
It will cause fetching wrong ipk files from adt repo. To avoid this,
we use wget options --no-cache to disable all server side cache.
It will make the fetch speed slower, yet correct always.
(From OE-Core rev: 2e9e8af197671ae06de1bdc9201765b160869d60)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu
Beth Flanagan
Stefan Stanacar
Hongxu Jia
Richard Purdie
Jessica Zhang
Peter Seebach
Saul Wold
Lianhao Lu
Martin Jansa
Mark Hatle
Yu Ke
Liping Ke