This was added to enable the usage of git through proxies.
(Bitbake rev: 449fc52e483a3bf1cec1c5d8cf8c3946ec5292ab)
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's not a whole lot of point showing how many tasks are running when
we're in quiet mode, it just looks a bit strange particularly when it's
not running any tasks.
(Bitbake rev: 5317200d9cd73c6f971bc1b0cfe8692749e27e3a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we have the task number here we need to subtract 1 to get the number
of tasks completed.
(Bitbake rev: 7c78a1cd3f0638ae76f7c7a469b7f667c7c58090)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of fixes for the "Initialising tasks" progress bar behaviour:
* Properly finish the progress bar when using bitbake -S
* Finish the progress bar before calling BB_HASHCHECK_FUNCTION (so that
in OE when that shows its own "Checking sstate mirror object
availability" progress bar it gets shown on the next line as it
should).
(Bitbake rev: de6759d8e9990e426e6d6464a2e05381cd4c12d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The CUPS ipptool URL we were checking now redirects to github where the tarball
isn't present, so remove it from the test suite.
(Bitbake rev: 4b50895fb3462b21e3874a2e99c363c8d05e89e6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds handling of the non-git layers to create and update the
corresponding layer objects in Toaster.
(Bitbake rev: 0a9b5d7d9655dbb09d458fc6e330e932f0f9dab6)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many of the methods in toasterui and buildinfohelper rely
on the internal state of the buildinfohelper; in particular, they
need a Build object to have been created on the buildinfohelper.
If the creation of this Build object is tied to an event which
may or may not occur, there's no guarantee that it will exist.
This then causes assertion errors in those methods.
To prevent this from happening, add an _ensure_build() method
to buildinfohelper. This ensures that a minimal Build object
is always available whenever it is needed, either by retrieving
it from the BuildRequest or creating it; it also ensures that
the Build object is up to date with whatever data is available
on the bitbake server (DISTRO, MACHINE etc.).
This method is then called by any other method which relies on
a Build object being in the internal state, ensuring that the
object is either available, or creating it.
(Bitbake rev: 0990b4c73f194ec0be1762e4e48b1a525d8349fb)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify buildinfohelper and toasterui so that they record the
recipe parse progress (from ParseProgress events in bitbake)
on the Build object.
Note that because the Build object is now created at the
point when ParseStarted occurs, it is necessary to set the
build name to the empty string initially (hence the migration).
The build name can be set when the build properly starts,
i.e. at the BuildStarted event.
Then use this additional data to determine whether a Build
is in a "Parsing" state, and report this in the JSON API.
This enables the most recent builds area to show the recipe
parse progress.
Add additional logic to update the progress bar if the progress
for a build object changes.
[YOCTO #9631]
(Bitbake rev: f33d51d46d70e73e04e325807c1bc4eb68462f7b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In situations where a bitbake run fails before the build
properly starts and BuildStarted is fired, a UI has no way
to get at the targets passed to the build. This makes it
difficult for the UI to report on the targets which failed.
Fire a BuildInit event before running buildTargets() or
buildFile(). This enables a UI to capture targets passed to
buildTargets(), even if the build fails (e.g. the targets
themselves are invalid).
[YOCTO #8440]
(Bitbake rev: ac02fda870965bf7d44ff5688eda54d2d11ab9c7)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git annex fetcher needs git annex to be initialized. Previously
it was using 'git annex sync' to do this, but that has the downside
of moving the checkout to the tip of the default branch. This means
that tags, SRCREV, etc don't work in the gitannex case.
(Bitbake rev: c1a57e2dd7fc96834643be5591a96f239215481a)
Signed-off-by: Terry Boese <terry.boese@vecima.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Revision d0f904d407f57998419bd9c305ce53e5eaa36b24 accidentally broke
items() and values() and made them cause stack overflows. Undo that
breakage.
(Bitbake rev: 88c5beca705efa7df4a96fb2aaf3f13c336ac328)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Starting from tar 1.29 the --exclude option won't work
anymore if is not used before the path. There are some
fetch modules that copy the ptest using tar and --exclude
option. This fixes these for bitbake.
[YOCTO #9763]
(Bitbake rev: cc71d5d9da71ea5f21d02f3b2fbf119bd2d794f0)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If using OE's externalsrc with a source tree that is not tracked by git
and contains broken symlinks, you can receive "TypeError: unorderable
types: NoneType() < str()" within the file checksum code due to:
checksums.sort(key=operator.itemgetter(1))
Don't add files with no checksum to the checksums list in order to avoid
this.
(Bitbake rev: 484fe5a3f5b840e5422cbdff0eef9aecfe944a19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If better_exec() throws a subprocess.CalledProcessError then show the output to
the user as it likely contains useful information for solving the problem.
(Bitbake rev: 8a6424ed871c3cbacd21cae8bc801197f83d67a6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While switching from master to krogoth build with a common download directory,
got a large number of warnings like the one listed below:
WARNING: freetype-2.6.3-r0 do_fetch: Couldn't load checksums from
donestamp /home/maxin/downloads/freetype-2.6.3.tar.bz2.done: ValueError
(msg: unsupported pickle protocol: 4)
These warnings are caused by the difference in pickle module
implementation in python3(master) and python2(krogoth). Python2 supports
3 different protocols (0, 1, 2) and pickle.HIGHEST_PROTOCOL is 2 where as
Python3 supports 5 different protocols (0, 1, 2, 3, 4) and
pickle.HIGHEST_PROTOCOL is obviously 4.
My suggestion is to use 2 since it is backward compatible with python2
(all the supported distros for krogoth provides python2 which supports
pickle protocol version 2)
(Bitbake rev: cc67800f279fb211ee3bb4ea7009fdbb82973b02)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that the logging FIFO doesn't do a complete read (or the sender a
complete write) with the result that an incomplete message is read in bitbake.
This used to result in silently truncated lines but since 42d727 now also
results in a warning as the start of the rest of the message isn't a valid
logging command.
Solve this by storing incoming bytes in a bytearray() across reads, and parsing
complete messages from that.
[ YOCTO #9999 ]
(Bitbake rev: 508112793ee7ace613f07695222997309a2ca58f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to keep track of layerindex data in our database. And
using branch==release is very confusing in the schema. Instead use the
existing Release definition to keep track of which release a
layer_version is for.
Remove the Branch model and all references to it.
Create a migration path to convert from up_branches to their
corresponding releases.
(Bitbake rev: f8f4cffe6fd371f3a7e63690c68f3fcb5dc1f297)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In MultiStageProgressReporter, set a guard when we start the progress
so that it can't happen more than once. This fixes "Initialising
tasks.." being shown twice in succession when running bitbake in
non-interactive terminal mode.
(Bitbake rev: 923e68e069127ee7f6e11b91eb1cfa09d502a110)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that progress information we can extract from a task is
rarely apportioned closely enough to the time taken for the ETA to be
accurate, so showing it is going to be misleading most of the time for
anything but the most basic of examples. Let's just remove it and avoid
misleading (or worse, annoying) the user.
Fixes [YOCTO #9986].
(Bitbake rev: 235db4870b11db97250979e647b54cdb5ce4fbb6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify custom widgets then we don't want to assume where the
"extra" position is - you should have to specify it, and if it isn't
specified it shouldn't just wipe out the last widget or you can start to
see odd behaviour if you're modifying the code.
(Bitbake rev: 19e33c10feb1637589ceb05b5e8d58b1e012ccb8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using a PREMIRROR with plain (non-unpack) files, a SRC_URI like
SRC_URI = "file://devmem2.c"
will cause devmem2.c to be a symlink in the WORKDIR pointing to the
local PREMIRROR.
Trying to apply a patch on this file will either modify the file on
the PREMIRROR or will fail due to sanity checks:
ERROR: devmem2-1.0-r7 do_patch: Command Error: 'quilt --quiltrc /cache/build-ubuntu/sysroots/x86_64-oe-linux/etc/quiltrc push' exited with 1 Output:
Applying patch devmem2-fixups-2.patch
File devmem2.c is not a regular file -- refusing to patch
(Bitbake rev: cfd481fe9799e7a4c6bfac32e56cc91cfcd81088)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the data written in this way is coming back out the
files out of order. I've not been able to simplify the test case to a
point where this was standalone reproducible. Simplify the code and
write out the cache files sequentially since this seems to avoid the
errors and makes the code more readable.
(Bitbake rev: 14ec47f5f0566dbd280fae8a03160c8500ad3929)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've seen cache corruption where the pairs come out in a different
order to the way we saved them for unknown reasons. Add better sanity
checking to give a more user friendly error rather than a crash/traceback.
Also allows the system to reparse and recover.
(Bitbake rev: 4be4a15491530bd6dc018033ad3d4b2562ab6e23)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we no longer have random data like version fields in these structures
and we can assume any extra cache data subclasses our class, simplify the
code.
This is mostly reindenting after removal of the pointless type checks.
(Bitbake rev: 5eb36278ac9975de1945f6da8161187320d90ba7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Firstly, don't store the versions fields in memory in the cache objects
data store. This just complicates the code for no good reason.
Secondly, write the version fields to all cache files, not just the
core one. This makes everything consistent and easier.
(Bitbake rev: cb666262b2f986b5d9331dfb30458ef1a151fa4d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an "extras" cache file is corrupted, the system would not notice
and later fail with errors about missing entries. Add a test for this
which means we can fall back to re-parsing in those cases.
[YOCTO #9902]
(Bitbake rev: 51843d8f2bbe2e54db7593ca61984abe70423ef6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise you can look at the log and wonder why parsing isn't happening
when it really is due to other code paths.
(Bitbake rev: b48d95677a4d285a77cda2892179965f7f8f06dd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Idle timeout can be specified either by -T/--idle-timeout option or
by sessing BBTIMEOUT environment variable. Bitbake xmlrpc server
will unload itself when timeout exprired, i.e. when server is idle
for more than <idle timeout> seconds.
[YOCTO #5534]
(Bitbake rev: 5fa0b3a19e7d0f40790f737abeddf499d53f1f6a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option makes bitbake xmlrpc server to run in foreground.
It should be useful for debugging purposes.
(Bitbake rev: 9d4254be5853a546a346bf0d19919dcfba12773d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the runqueue cleanup/conversion, "dep" was mistakenly used where "tid" should
be leading to incorrect task-depends.dot files and causing general confusion.
Fix this, its clearly incorrect looking at the code.
(Bitbake rev: 689730dbb068c5ea3593e7b92fe5d5e5c0c3760a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If environment variable BBSERVER == 'autostart' bitbake will
automatically load server if it's not running yet.
If host and port are in bitbake.lock then bitbake tries to check
if server is running and responses to commands and starts new
server only if this check fails.
[YOCTO #5534]
(Bitbake rev: 89c6e625d47303b2aad8e6645762f17aee01b2d4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All environment variables that are not in the list returned by
preserved_envvars_exported are cleaned by bb.utils.clean_environment.
Added BBSERVER to the list as we need to access it in bb/main.py
after the call of bb.utils.clean_environment.
(Bitbake rev: 15c4ea679f4fe097a9f21cccfc82907b5f39a4e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented check_connection function. The purpose of this function
is to check if bitbake server is accessible and functional.
To check this this function tries to connect to bitbake server and
run getVariable command.
This API is going to be used to implement autoloading of bitbake
server.
[YOCTO #5534]
(Bitbake rev: 1a18f5ceb478f766b53850451549333f655621ea)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Doing both os.unsetenv(foo) and then del os.environ[foo] is pointless as del
will call unsetenv automatically.
(Bitbake rev: a4463e2ff3c7d234320176d671719243292f1af0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement progress reporting support specifically for the fetchers. For
fetch tasks we don't necessarily know which fetcher will be used (we
might initially be fetching a git:// URI, but if we instead download a
mirror tarball we may fetch that over http using wget). These programs
also have different abilities as far as reporting progress goes (e.g.
wget gives us percentage complete and rate, git gives this some of the
time depending on what stage it's at). Additionally we filter out the
progress output before it makes it to the logs, in order to prevent the
logs filling up with junk.
At the moment this is only implemented for the wget and git fetchers
since they are the most commonly used (and svn doesn't seem to support
any kind of progress output, at least not without doing a relatively
expensive remote file listing first).
Line changes such as the ones you get in git's output as it progresses
don't make it to the log files, you only get the final state of the line
so the logs aren't filled with progress information that's useless after
the fact.
Part of the implementation for [YOCTO #5383].
(Bitbake rev: 4027649f422ee64b1c4e1ad8d48ac295050afbff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Store the path to the *.rootfs.manifest file for targets which
generate images.
A link to the package manifest is displayed in the build dashboard
for targets which produce image files.
Like the license manifest path, if a target would have produced
the package manifest (but didn't, because it already existed), that
path is copied from the target which did produce the package
manifest.
(Bitbake rev: 79b8e349a0da2ea6b97ad82daa5837e6dfffe0af)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a target is built which is classified as an "image" target
(e.g. "core-image-minimal"), Toaster reads the list of files in
the image (from the files-in-image.txt file).
However, Toaster continues to do this for builds which don't
produce images, if the recipe providing the target is an
image recipe. This can result in a list of files in the image
being attached to a target which didn't produce an image (e.g.
rootfs).
When associating files with an image, ensure that only targets
with a task which produces an image have "files in the image"
associated with them.
[YOCTO #9784]
(Bitbake rev: 44375d0c2a88e0070b8067c9285b89c54eaf3152)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SDK artifacts were previously picked up by toaster.bbclass and
notified to buildinfohelper (via toasterui). The artifacts
were then added to the Build object, so that it wasn't clear
which artifact went with which target; we were also unable
to attach SDK artifacts to a Build if they had already been
attached to a previous build.
Now, toaster.bbclass just notifies the TOOLCHAIN_OUTPUTNAME when
a populate_sdk* target completes. The scan is moved to buildinfohelper,
where we search the SDK deploy directory for files matching
TOOLCHAIN_OUTPUTNAME and attach them to targets (not builds).
If an SDK file is not produced by a target, we now look for a
similar, previously-run target which did produce artifacts.
If there is one, we clone the SDK artifacts from that target
onto the current one.
This all means that we can show SDK artifacts by target, and should
always get artifacts associated with a target, regardless of whether
it really build them.
This requires an additional model, TargetSDKFile, which tracks
the size and path of SDK artifact files with respect to Target
objects.
[YOCTO #8556]
(Bitbake rev: 5e650c611605507e1e0d1588cd5eb6535c2d34fc)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When buildinfohelper records the targets for a build, it looks
up any existing targets for a build and creates them if they
are not present. This is because in the case of Toaster-triggered
builds, the Target objects have already been created (inside
triggerBuild()) and don't need to be recreated; but in the case
of cli builds, the Target objects have to be created by
buildinfohelper.
The issue is that the code for retrieving an existing target for
a build only looks for Targets with a matching target and build,
e.g. Targets for build X with target "core-image-minimal". But it
is perfectly legitimate to call bitbake with a command like
"bitbake core-image-minimal:do_populate_sdk
core-image-minimal:do_populate_sdk_ext". In such a case, the
code which looks for matching targets finds two objects, as it
doesn't filter by task.
Add the task into the filter for the Target so that only one
Target object is be returned. Note that a command
line like "bitbake recipe:task recipe:task" will still cause an
error as bitbake doesn't de-duplicate the command line arguments
and will run the recipe:task combination twice.
(Bitbake rev: 1c0a689fdaae6469d4afb98583161073d32ea50b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bzImage and modules files were previously attached to a build,
rather than to the target which produced them. This meant it was
not possible to determine which kernel artifact produced by a
build came from which target; which in turn made it difficult to
associate existing kernel artifact with targets when those
targets didn't produce artifacts (e.g. if the same machine + target
combination was built again and didn't produce a bzImage or modules
file because those files already existed).
By associating kernel artifacts with the target (via a new
TargetArtifactFile model), we make it possible to find all
the artifacts for a given machine + target combination. Then, in
cases where a build is completed but its targets don't produce
any artifacts, we can find a previous Target object with the same
machine + target and copy its artifacts to the targets for a
just-completed build.
Note that this doesn't cover SDK artifacts yet, which are still
retrieved in toaster.bbclass and show up as "Other artifacts",
lumped together for the whole build rather than by target.
[YOCTO #8556]
(Bitbake rev: 9b151416e428c2565a27d89116439f9a8d578e3d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the image and artifact scan code from toaster.bbclass and
consolidate its logic with the existing logic in buildinfohelper.
Remove handler setup for events which used to be fired from
toaster.bbclass but which are now handled directly by buildinfohelper.
[YOCTO #8556]
(Bitbake rev: f0085cd554604cfff4a3f40a34825fbb6878004f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Runqueue errors direct the user to view the "failure below",
but no additional error message is available.
Log the stacktrace so that the user can see what went wrong.
Also fix a typo in the log message.
(Bitbake rev: e191f401e372ee181bc02250232ad9cb9a0e9477)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The OrderedDict's item is sorted by insertion order, there might be a
problem when build the same recipe again, for example:
- First build of acl:
Depends: libattr1 (>= 2.4.47), libc6 (>= 2.24)
- Second build of acl:
Depends: libc6 (>= 2.24), libattr1 (>= 2.4.47)
They are exactly the same depends, but tools like "diff" doesn't think
so. Return sorted OrderedDict will fix the problem.
(Bitbake rev: a392f19f16ef8202ce3c12afbeb186a02438da17)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a few places we use the fetcher code to fetch files outside of a
task, for example uninative in OE. In that case the pid of the event is
0 and that was causing an error in BBUIHelper.eventHandler(). Check the
pid and do nothing if it's 0.
(Bitbake rev: 59cb919e5cd5c653fb4d69b2d6a4320648443e10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When bitbake executes a shell or Python function it can cd/chdir() into a
directory before executing the task. If no directory is specified then the
default of $B is used. However $B is an OpenEmbedded variable and BitBake
shouldn't be aware of it.
To solve this change the semantics slightly so that if no directory is
specified, the current working directory isn't changed. There's also a sanity
check that emits a warning if a Python task does os.chdir() without restoring
the old path, and the previous working directory is restored.
This does change semantics: whereas before a function in OE would have $B as the
working directory unless specified, now the working directory is the top of the
build tree. Any breakage this causes can be solved by either adding
do_some_task[dirs] = "${B}" or by using absolute paths in the task.
[ YOCTO #4634 ]
(Bitbake rev: 67a7b8b021badc17d8fdf447c250e79d291e75f7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The messaging FIFO is UTF-8, so decode the command as UTF-8 as well as the value
as otherwise "bberror" != b("bberror") and none of the messages from shell
functions are ever displayed.
Also add an else to the command parser so unhandled commands are noticed.
[ YOCTO #9947 ]
(Bitbake rev: 42d727743fa599e0a3c5ad2c29a1e6ede1a918bb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With Python 3 create_string_buffer needs a bytes() not a str() but as we were
catching all exceptions nobody noticed.
[ YOCTO #9910 ]
(Bitbake rev: 6576a9a95486c28a01d4211b4a33cc3e2c55a7cc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using toaster-eventreplay to run a bitbake event file
through toasterui/buildinfohelper, errors occur when the
tasks are updated with buildstats info:
RuntimeWarning: DateTimeField Task.started received a naive
datetime (2016-07-06 09:15:22.070000) while time zone support
is active.
This is because a method in buildinfohelper returns a naive
datetime, but Django is expecting timezone-aware datetimes.
Ensure that datetimes used to set the started/ended times on
tasks are converted to timezone-aware datetimes.
(Bitbake rev: df9f4337bec87024ea6a43138c6080a755eb7fab)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Francisco Pedraza
Paul Eggleton
Ross Burton
Michael Wood
Elliot Smith
Ulrich Ölmann
Terry Boese
Richard Purdie
Mariano Lopez
Maxin B. John
Mario Domenech Goulart
Enrico Scholz
Ed Bartosh
Robert Yang