New patch is required to fix the location of the libdir defined i
the libffi.la file which caused a bad RPATH (/usr/lib/../lib) due
to the gcc -print-multi-os-directory returning ../lib.
Remove Aarch64 patches as it is now supported upsteam. Other patch
code is also upstreamed
(From OE-Core rev: 6f1caa75b181eb40fdbbd4d9979a5f61c0b9435a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, glib will probe for the existence of xsltproc and use that
to decide whether or not it wants to generate manpages. This has two
consequences, neither of them good:
a) the result of the build will vary depending on whether xsltproc
happens to be installed in either the native sysroot or the host
environment; and
b) if xsltproc does happen to be installed but docbook-xsl isn't, the
build will fail with "I/O error" messages.
(From OE-Core rev: b2e2c6e1a20ea4c53dea04992bb1b38890a959dd)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only place in pcre that requires readline is pcretest, and even there it's
optional. This allows the dependency to be removed unless specifically requested.
(From OE-Core rev: 5bf7397cdb91d8ab0f2a525484eee9a3cec25f87)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to the documentation, the only reason for needing ncurses is
to support colour output from msgcat. Make this optional so that
ncurses doesn't need to be built if colour output is not required.
(From OE-Core rev: a4040ad83984ee27fa9dc16d276c699d24b03b4e)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GDB's configury has a tendency to hard-code the path where it found
libexpat using "-Wl,--rpath". This is undesirable and leads to QA warnings.
Fortunately, the helpful GDB maintainers have provided a "--disable-rpath"
switch to turn this behaviour off. Let's use it and profit.
(From OE-Core rev: 3d70f28cc9612f733b835df139f31c197528677a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recommendation is of no obvious value and causes unexpected behaviour
when using IMAGE_FEATURES += "dbg-pkgs".
(From OE-Core rev: b64f2ef2be5dca1eb13a305147a2b99d57985010)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- patches updated
- nopw-option.patch dropped as the option is integrated since 2013.56
- compile tested for ARMv5 target
(From OE-Core rev: ce92c707f26aff8f02021c757056af4ecddb315d)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* number of TUNE_CCARGS conditionals is important if we add
extra space with each one in "else" branch
I'm building for 2 MACHINEs one is cortexa9, second is cortexa8
few months ago we added TUNE_CCARGS[vardepvalue] in bitbake.conf
http://git.openembedded.org/openembedded-core/commit/?id=03f1e34ea3ce80931e9c3cd2ab22824f28a7233b
which fixed some cases (like mentioned tune-xscale and tune-arm926ejs)
where both had unused TUNE_CCARGS when common DEFAULTTUNE was used.
with cortexa[89] it's different, because cortexa9 has one extra TUNE_CCARGS
TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa9", "-mtune=cortex-a9", "", d)}"
which adds extra *space* even when not used because of '+=' and as result:
$ bitbake-diffsigs tmp-eglibc/sstate-diff/1366797730/*/armv7*/adapterbase/*do_configure*
basehash changed from f986789fb8fb3579ed6a3492cc8a8d10 to c851b5f838d945ee13072e9ad6725dca
Variable TUNE_CCARGS value changed from
' -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon '
to
' -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon '
Hash for dependent task gcc-runtime_4.7.bb.do_populate_sysroot changed from bdeabf7a86958b9110b566344b7916de to 2be5618e6bc8c57ec9db5659bf217915
Hash for dependent task eglibc_2.17.bb.do_populate_sysroot changed from b4f40fc62dde684acd0a574532a55360 to 97fcb426603d4a1c1099c0504d2ebf7d
Hash for dependent task glib-2.0_2.34.3.bb.do_populate_sysroot changed from fd2f90b83098c34e88d649d70f6ea4f5 to ebd740bb94ea3eb0a914efda6fc82c4a
(From OE-Core rev: b7430ff83760ac29079d20dc7c62f498a0a9d55d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If USE_LDCONFIG is not set then we won't ship ld.so.conf. However,
eglibc still installs it which leads to a QA warning. Prevent that by
removing the file (and the subsequently-empty directory /etc) in this
situation.
(From OE-Core rev: 23b5dd2ab8a556fcef3aa34689310d9d5f61b3d1)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The direct use of gnome-keyring was removed back in 1.1.13, so remove the
dependency.
(From OE-Core rev: 6389b4c6c58def894bd895e797c2d579439f69d5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GDB wants to install a bunch of files in ${datadir}/gdb/python/gdb
and ${datadir}/gdb/syscalls. These pathnames are invariant with
TARGET_ARCH which means that if you build gdb multiple times for
different targets they will all try to write to the same location
and you get a lot of warning spew about manifest conflicts.
Prevent this by factoring the target specification into ${datadir}
so that different copies of GDB install their files into different
paths.
(From OE-Core rev: 3e87aba1ee2ca0e39ba66fb7cba52e48df499c23)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't add the first line of /etc/rpm/platform to the list of patterns
to match when computing an arch score, use it just for getting
information about the platform (cpu/vendor/os).
[YOCTO #3864]
(From OE-Core rev: 9263a2192ccf8ca513cbf7f2f88473e267e6b945)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With normal toolchain it works. But fails badly when external Linaro
toolchain is used. And this is why:
-e "s/^\(CCFLAGS =.*\)/\1 -isystem/home/hrw/devel/canonical/aarch64/openembedded/build/linaro-tcwg/gcc-linaro-aarch64-linux-gnu-4.7-2013.04-20130415_linux//aarch64-linux-gnu/include -O2 -pipe -g -feliminate-unused-debug-types/" \
(From OE-Core rev: f6244a9d3da7c301f19efc114c2aaf39e5eec299)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise we might end up creating directories under sstate-cache with whatever
random umask has been selected for the task that we're trying to package. This
would be a bad thing since it might result in losing group write access for
newly created dirs, and/or losing group read access for the sstate files
themselves.
(From OE-Core rev: d8c4f442c41bf3ac5e064630657cd3fa1b5c43b1)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old script failed to parse unit files containing comments like
| #Alias=some-alias
or whitespaces like
| WantedBy = foo
correctly. Patch changes script to interpret keywords only when they
are at the beginning of a line and ignores whitespaces before the '='.
(From OE-Core rev: 443e75ee2c0e9a62df997aef24855bce54d39177)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The timestamps in libxslt-1.1.28.tar.gz (specifically) are rather hokey, making
the source files for the documentation appear newer than the generated output:
-rw-rw-r-- 500/500 16307 2012-11-21 07:22 libxslt-1.1.28/doc/xsltproc.xml
-rw-rw-r-- 500/500 7082 2012-09-12 07:24 libxslt-1.1.28/doc/xsltproc2.html
-rw-rw-r-- 500/500 9475 2012-09-04 15:26 libxslt-1.1.28/doc/xsltproc.html
-rw-rw-r-- 500/500 8256 2012-11-21 06:03 libxslt-1.1.28/doc/xsltproc.1
This causes make to decide that xsltproc.1 needs to be regenerated during the
installation process. However, this requires a native xsltproc binary which
may not be available, leading to errors like:
| make[2]: /usr/bin/xsltproc: Command not found
| make[2]: [xsltproc.1] Error 127 (ignored)
Adding DEPENDS_class-target = "libxslt-native", or installing xsltproc in the
host environment, fixes the above but the documentation still doesn't build:
| I/O error : Attempt to load network entity http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl
| warning: failed to load external entity "http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl"
| error
| xsltParseStylesheetFile : cannot parse http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl
| compilation error: file ./xsltproc.xml line 10 element refentry
| xsltParseStylesheetProcess : document is not a stylesheet
And in any case, requiring libxslt-native would increase build time for no
real benefit. So, let's just adjust the timestamp on the shipped copy of
xsltproc.1 to make it appear newer than the source files.
(From OE-Core rev: 12074bf5319c1086f86efd00f502c91fed344698)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent this getting the default DESCRIPTION of "X application" from
xorg-app-common.inc.
(From OE-Core rev: 11c11ff361cfa8180dbafce94ff3e9e9426263b3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent this getting the default DESCRIPTION of "X application" from
xorg-app-common.inc.
(From OE-Core rev: 9bacbff31e8cbe35c43637b2a213041a621ef608)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows the description to show up at the recipe level e.g. in the
OE layer index.
(From OE-Core rev: 5f1093bca16b3cd905beb69bee095d92aa350cfe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* HOMEPAGE was incorrect
* We're not really interested in the fact that Smart works across
different distros.
(From OE-Core rev: a7f8989e027abea84a371703909f62a8b9a03177)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the same SUMMARY, DESCRIPTION, SECTION and HOMEPAGE for the recipes
for both "which" versions.
(From OE-Core rev: 33cf83dc60f453a5ba393a9108c3651ce27017fc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the link from DESCRIPTION to HOMEPAGE and add a short SUMMARY.
Also move IMAGE_INSTALL line to be further down in the recipe.
(From OE-Core rev: be1f94152032f6bcbc0c37c6b57dbc6ab3caf6dc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SUMMARY for eglibc-locale, and HOMEPAGE in eglibc-collateral.inc
(used for eglibc-locale and eglibc-mtrace).
(From OE-Core rev: a677fcfbc1572f6ae7e2326ae0ab55522e24fe77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel's penchant for custom linker scripts means that it doesn't
generally get on very well with gold. Make sure we are using the BFD
linker here no matter what the distro default is set to.
(From OE-Core rev: 5c8277610ae84740e0724b27f10dba3895d40c05)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is distro policy and shouldn't be getting set by the recipe. It was
added in commit 9b547ecf84 as a workaround
for gcc bug #37436, but the compiler bug was fixed more than four years
ago and the workaround is no longer required.
(From OE-Core rev: 05caf3417402df5c4f8f722830bfb896385cf9a5)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License text is clearer without HTML entities such as '&' and '—'.
(From OE-Core rev: 72479ca164d90fa0b4ef84d5f09f304d962865e5)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The AGPL-3.0 file wasn't filled with the correct text. The file has been
replaced with a copy of http://www.gnu.org/licenses/agpl-3.0.txt.
(From OE-Core rev: 9fe0e118277966487097e9acdd76e1a0696e6c22)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If it's not first boot, /tmp has already been symlinked to /var/volatile/tmp.
But the udev service starts before populate-volatile.sh starts. This leads to
a dead link at /tmp. As a result, trying to create any file under /tmp will
fail.
If a USB is plugged in before the populate-volatile.sh script starts, the
/tmp/.automount-$name file will not be created correctly. As a result, when
the USB is unplugged, the /media/$name directory is not removed.
So we create /var/volatile/tmp directory in the udev script to avoid this dead
link problem.
[YOCTO #3404]
(From OE-Core rev: 2f93c8466ca146c965585ea38210ddb5fb5754bd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depending on kernel version used, the system can hung when trying to
mount the extended partition (not the logical one) as it is a holder
for other partitions and does not have a filesystem in it.
To avoid this to happen we just mount partitions when these are using
known filesystems so it does not try to mount a partition for an
unsupported filesystem.
Reported-by: Vladan Jovanovic <vladan.jovanovic@gmail.com>
Reported-by: Leonardo Sandoval Gonzalez <b42214@freescale.com>
(From OE-Core rev: 895c9685a7f95dc84786213f945895a504a16254)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Vladan Jovanovic <vladan.jovanovic@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rtl-license package FILES was pointing to the wrong directory as it
was removed from there in commit:
acd3735 linux-firmware: Remove duplicaed license from rtlwifi subdir
This resulted in a do_rootfs failure for core-image-sato-sdk for fri2
with ipk when the linux-firmware-dev package tried to install
linux-firmware-rtl-license which wasn't created as it was empty.
Tested on core-image-sato-sdk build for fri2 on dylan commit:
789b2b7e0cca404ff8ba8ed5ba823d215e6ba5b4
Cc: Saul Wold <sgw@linux.intel.com>
Cc: Beth Flanagan <elizabeth.flanagan@intel.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
(From OE-Core rev: fc7fafcb3bb5c12bad07e12c15ac3a489bd0291f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without disabling the tests in the native build, glib-2.0-native will need
libdbus-native to be present. As we don't run the tests, disable them so we
don't have build failures due to missing dependencies.
Also, the LSB override was missing PTEST_CONF so the same problem could happen.
After adding PTEST_CONF the LSB override is identical to the non-overridden
EXTRA_OECONF, so remove it.
Finally, to be explicit, put --enable-module-tests in PTEST_CONF.
(From OE-Core rev: 395b90054eccddc1c9062a9a8657ed4482b7710a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because both matchbox-session-sato and settings-daemon were attempting to
install their preferred values though schemas there was a race as to which ones
were used.
Revert matchbox-session-sato back to writing the values directly, adding a
dependency on gconf-native so that this can happen on the host.
(From OE-Core rev: 90ca53cbbdb1ed30883d4aa8ce9c933ae1fad5fa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
armv5t was seeing ICE on code from elfutils it has been fixed upstream
so lets backport it.
(From OE-Core rev: 6c50d60ce3fd7242e67a531d5875edeb8b7a3651)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstalls were producing errors like this:
(gconftool-2.real:10095): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
These are harmless but distracting, so take a patch from upstream to silence
them.
(From OE-Core rev: bc0a4f6e4d01d5912c2589efa9b69d7eda462f73)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An excluded package left its files behind, which meant they could end up in
another package instead, meaning we could ship GPLv3 binaries even with GPLv3
in INCOMPATIBLE_LICENSE. Skip the files belonging to the excluded packages to
prevent this from occurring.
(From OE-Core rev: c045bfe6b991006ac80f0e2d06a8917ae58d9262)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpng 1.6.0/1.6.1 emits warnings about function ordering when there isn't a
problem, which causes Cairo to fail loading images. Take the patch from
upstream to fix this.
(From OE-Core rev: 50f823557cb5857dfe585a9da88bb8f61ebfba99)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix was rejected by upstream, the correct fix is actually to fix libpng.
(From OE-Core rev: f7f8ec1197ec64620c80e13214dc395ab3e12afc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a variable called UBOOT_LOCALVERSION which when set will
place a version string in the .scmversion file of the u-boot
sources. This string will be picked up by the u-boot Makefile
and will be appended to the u-boot version. This is done to
make it easier to identify what revision of the u-boot sources
are being run. For example you can use a setting like the
following to add the short commit id to the u-boot version
string:
UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
(From OE-Core rev: 566298409408c6103f7a9871bb13ae5449c4fd64)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to import setuptools on a minimal image, it reports that some
python module is missing. We add those missing python modules as runtime
dependency.
(From OE-Core rev: c5de114f63fe3d60a48622ec5be8fa34ce177191)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing this manually the icon cache won't get refreshed.
Rearrange recipe to comply the the styleguide as well.
(From OE-Core rev: a0643812b05cf7ed8b6f530f81925f60089c2410)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O irony: the grub2/gnulib nag macro that says "don't use gets, use fgets" breaks the build if you're using a recent (e)glibc release that has gets removed.
Fedora already #if 0's the check in grub, so I stole their patch.
(From OE-Core rev: 261e377b08388a288ee521a3629877b89e18e42b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This attempts to fix [YOCTO #4060] - connman-applet spews warnings, but with this one PNG images still don't work in weston :(
The ARM NEON option was added because the autodetection code in configure.ac is broken:
/usr/lib/weston/weston-desktop-shell: symbol lookup error: /usr/lib/libpng16.so.16: undefined symbol: png_init_filter_functions_neon
License checksums update due to date and package version changes:
index e95d359..d86a7da 100644
(From OE-Core rev: e31ef0211c2cb18c322517a44b714895e51284e1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lttng-ust: upgrade to the latest version 2.1.2
Also updated HOMEPAGE and BUGTRACKER.
(From OE-Core rev: d18cec89e7afd05473232e587893334c4f921b41)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These data files are required for module-alsa-card to load properly
(From OE-Core rev: 8dda0dc79f5c90f8d40450ba6215f44edcbacb8f)
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to some issues with postinstalls that register hooks, we changed the
logic a bit. Now, all postinstalls that register hooks will return
successfully and only after, if hooks fail, mark the package as unpacked.
(From OE-Core rev: 82dae98d0eb771c05e57635f0f8763b118d8177e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow to register, in a single postinstall, multiple hooks.
(From OE-Core rev: b396138ee081c8f5dddbaab0e374787ba2e31029)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow to register, in a single postinstall, multiple hooks.
(From OE-Core rev: 2cd244d6c93ec6d39e2649de64575c365bd4238d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow to register, in a single postinstall, multiple hooks.
(From OE-Core rev: 9553874cf02ba443aff1bbead56bacfcda9bb6ca)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall needs to reference $D, not ${D} which would get expanded
by bitbake. This allows postinsts to run correctly on the target system.
(From OE-Core rev: 6573685a5374034df065c41bbe71c7ac49e4b9a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want systemd support we use systemd's udev, so disable systemd
support in this udev to avoid packaging the unit files.
(From OE-Core rev: 36aa37e693bcb76a96761847dbef6a015d96fd98)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libudev previously depended on udev, but this causes problems with multilib
if the user wants to install two variants of libudev as they'll pull in two
variants of udev, which will conflict.
Instead, remove the dependency and rely that the image pulls in udev in some
way, such as the commonly used packagegroup-core-boot.
(From OE-Core rev: 6168ea4e00fd1c8296fe770fa9e2ef00018f5621)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently, the default qemumips color depth was set to 8 and the colors were not
displayed properly. cirrusfb driver doensn't seem to accept color depth
as a kernel parameter, so we have to do it here.
[YOCTO #4340]
(From OE-Core rev: 876e020be334a9350094dbd1a29b9e49eceed603)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_populate_lic task has a race with the recipe since it relies on the
kernel being populated in the sysroot. This patch adds in the explicit missing
dependency.
[YOCTO #3534]
(From OE-Core rev: 578937213c6db9fa99981778ce61210e391b19a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-alternatives for multilibs are broken and nothing provides psplash in a
multilib build. This fixes the multilib code.
(From OE-Core rev: db1f6b24ddb2a19fb16b2ebb948bb3274b7ac295)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall for the opkg run-postinst hook checks for the existence of this
file. We therefore ensure it always exists during image generation.
(From OE-Core rev: 540cf355599e555615ed9684c3b480463588eb78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
THe USERADD_PARAMS and similar group variables are package specific variables
which should get added to the vardeps of the packaging process. This
change also ensures they get remapped correctly by the multilib code.
(From OE-Core rev: 805add18e7b917aaef61c82c0b5f2e9682af1d0d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, multilib packages don't have any code
added to the postinstalls to handle user additions.
(From OE-Core rev: b10d17d1b03fd0564103a6998f218d0968d1032b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise this setting "floats" and leads to non-determinstic builds.
(From OE-Core rev: 4eea01e9d775f2e56958a8bb194aadd8a242946d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=f76d4b3549ca220fa4bf84db2756ab45e11d06a3
moved volatiles handling for /run to the udev code only. This breaks
sysvinit+systemd combined systems when building sysvinit images.
This patch hacks the udevd init script in systemd to provide
the missing symlink allowing the sysvinit images built with udevd
from systemd to work correctly.
(From OE-Core rev: 6c6e5dc0baccd0904f785b1f80f39b5f530779cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use ${PN} when specifing service files so that they continue to get packaged
with multilib.
(From OE-Core rev: d394d27b66cbeb4e57017d2a49605243586477ac)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When libdir isn't /lib the files that are in nonarch_base_libdir were being left
out of the -dbg package.
(From OE-Core rev: 60bb2f795a0b3e83de5861185446992fb91ffba0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously this was using ${PN}-syslog.service, which changes with multilib.
(From OE-Core rev: ee36f997e68f5a995baf361191cef7a46ff51203)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using multilib this doesn't get caught by the default FILES_${PN}, so add
it.
(From OE-Core rev: 53f1540780e5d4e8035118a1920202735bd0a370)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This effectively reverts the move systemd's libexecdir to /sbin. This caused
too many issues in other places and was not well enough tested this close to
release.
Rather than use base_libdir, the nonarch version is used to try and give some
chance of multilib not being totally broken in the release. Also some variables
are used that mirror the systemd build system to reduce the risk of using
variables that "work" in the general case but will break with multilib.
(From OE-Core rev: e921d43e213f93da176fd27e48b557f802443dec)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, you can set VIRTUAL-RUNTIME_init_manager to an init system that
isn't in DISTRO_FEATURES. This leads to head scratching over unbootable images.
This adds a sanity check which ensures more valid systems are built.
(From OE-Core rev: c72ec4b52827f75351790eab483d258b2e87611a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This effectively reverts the changes made in b49ddeb11c
to move udev's libexecdir to sbin. The changes caused too many issues in
other places and were not well enough tested this close to a release.
Rather than use base_libdir, the nonarch version is used to try and give some
chance of multilib not being totally broken in the release.
(From OE-Core rev: c50e50fdafad378d75b7b74259a3d55ca0fe3d18)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we put a valid glob like "*/foo/*" into FILES, populate_packages
breaks with a "file exists" message. This is because the glob expansion
does not have "./" prefix however there may already be an entry in
the seen list which does have such a prefix. The easiest/simplest fix
right now is to add the prefix if it doesn't exist which only happens
for certain globs.
(From OE-Core rev: 138c5f3af892e33f576fc7dd268e122b179f82a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the mount command is not given the filesystem type to mount, then
it will try all the known filesystems. However, when a filesystem is not
supported by the kernel, the mount function call will return ENODEV.
The following patch, ecd90bc6aa,
introduced a problem because it bailed out on ENODEV too. Instead it should
have only bailed out on ENOMEDIUM.
[YOCTO #4308]
(From OE-Core rev: 82320d2074572477f26887eddc51dc2a1dfea403)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${datadir} was empty when building ${B} != ${S}, this patch addresses that
problem and means the -lenses package is no longer empty.
(From OE-Core rev: ee3b0d8fbe42a3c813039850886b5bf97544eb15)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport patches from linux-pam git repo to fix test case
tst-pam_pwhistory1 failure.
[YOCTO #4107]
(From OE-Core rev: 65e4a9f050ae588ec794808315a206d94ca7a861)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When pam is enabled an extra plugin is build and it references an incorrect directory
when separate build directories are used. This patch corrects the issue.
(From OE-Core rev: a6e91db198ae5b77986de25331631d894c7b97d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with external toolchain I have different HOST_PREFIX and HOST_SYS
AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy
then it tries objcopy without prefix which is found on host, but
that objcopy does not work for arm libs
* with internal toolchain gperf is not prefixed with HOST_PREFIX, but
fallback to "gperf" only finds the one in native sysroot first
* based on http://lists.linuxtogo.org/pipermail/openembedded-core/2013-April/037985.html
(From OE-Core rev: 6ae99136f1c1c59f4e55331c43cf0c0bac5abcdd)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit a2546fae [ftrace: Add -mfentry to Makefile on function tracer]
adds support for using -mfentry when possible, whenever the ftrace
CONFIG_FUNCTION_TRACER option is enabled.
This unfortunately causes bogus dwarf debuginfo to be generated:
gcc Bug 54793 - the location of a formal_parameter is not started from a
function entry with -mfentry
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54793
This can be fixed by applying the gcc patch above, which will be
present in gcc-4.8, but in the meantime, the problem is currently
being worked around in different ways by various tools. One of those
tools that we support in Yocto, Systemtap, requires the DW_AT_producer
string contain -mfentry, which means that it's assuming
record-gcc-switches is also used:
SystemTap Bug 15123 - workaround for bad debuginfo for -mfentry
http://sourceware.org/bugzilla/show_bug.cgi?id=15123
The lack of -grecord-gcc-switches and therefore a missing -mfentry
string in Yocto leads to the following Yocto bug:
Bug 4099 - Crosstap script check fails
https://bugzilla.yoctoproject.org/show_bug.cgi?id=4099
Which is what this patch intends to fix.
It only affects architectures that HAVE_FENTRY when
CONFIG_FUNCTION_TRACER is turned on and in any case is just adding to
the debuginfo, so there doesn't seem to be much risk to adding it.
(From OE-Core rev: c04f611aa4bf77867fe78a005d09434226feb62c)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-oe bbappend only increments PRINC, if we bump INC_PR here we
can remove that.
(From OE-Core rev: 9e74a1c9cb753a426b55544cc41860edb98e8d33)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-oe bbappend only increments PRINC, if we bump PR here we can
remove that.
(From OE-Core rev: 7aadfe2f293da665236aede5cb03f801d420d050)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-oe bbappend only increments PRINC, if we bump INC_PR here we
can remove that.
(From OE-Core rev: 976a06f41558d2246173414658d9f7b8eee193d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After installing Avahi we need DBus to reload it's configuration. In a
pure-systemd image there isn't a DBus init script to reload, so cut out the
middleman and just sent SIGHUP to all running dbus-daemon processes instead.
(From OE-Core rev: d6fb028de172bb649b905b605f6ddc8402af859a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe in meta-gnome has PR = "r1" so make it the same here and
avoid PR going backwards for existing users of meta-gnome when the
recipe there is removed.
(From OE-Core rev: 200685bde7ea222891e1dde27f086caea9216e48)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After installing Avahi we need DBus to reload it's configuration. In a
pure-systemd image there isn't a DBus init script to reload, so cut out the
middleman and just sent SIGHUP to all running dbus-daemon processes instead.
(From OE-Core rev: b3e468294a0723b3ceafe2022bf9d735eee64678)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpng 1.6 emits more warnings than before, and is also stricter with function
ordering. Fix the function ordering when reading PNGs, and stop treating all
warnings as errors.
(From OE-Core rev: 55d00b750f5c45e583abef406c96416cd6a8caa7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The install boot option was giving the following error when one tried to
install the live image on a permanent storage of a BSP.
cat: write error Invalid argument
Installation image failed
sh: can't access tty: job control turned off
Further digging into the issue, found out that the install script was trying
to do this:
cat /proc/mounts > /etc/mtab
And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts.
So the cat command was failing to write on /etc/mtab. As the contents of
the /proc/mounts is already reflected in the /etc/mtab file due to the
symlink-ing, there is no need for this step to recreate /etc/mtab in the
install script. So just removing this unnecessary step, which solves the
install issue of the live images.
Fixes this bug:
[YOCTO #4229]
(From OE-Core rev: f8663eac872882e94d956b1b604304e92b865766)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches backported from mesa Git and from mesa-dev mailing list.
(From OE-Core rev: f704bb42062f2ac15edaad36497a8d2815b8b8b2)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SCRCREV to pick up the following fix
updateme: use absolute path for generated BSP descriptions
When a custom BSP is used, a top level BSP is generated by the tools and fed
to the build system just as a user defined BSP would be located and
passed. The location of the generated file is placed in the top_tgt file,
which is used by subsequent stages. A relative path was being placed into
top_tgt, which binds the build to a particular directory structure and
working directory.
The location of parts of the build have changed, and this relative path is
no longer accurate. Changing it to an absolute path solve the build issues
related to custom BSPs.
(From OE-Core rev: 2d7b2478a3d48a5686afde790c378ee2f69b8e59)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New coreutils (8.15 onwards) build /usr/bin/realpath, which busybox also builds.
Add it to the alternatives handling to avoid file conflicts.
(From OE-Core rev: 826c18eb1c69f5e3689b5b0ef188f74ae930a050)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Other recipe versions in other layers
may be using connman.inc, so by resetting
INC_PR they go backwards in version.
Set the INC_PR correctly.
(From OE-Core rev: 2d56006cd88233c7f1f15a44f72a04bd0e441b25)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init-live.sh depends on udev performing automounting, which happens in
udev-extraconf. Explicitly depend on it so that we always have it installed.
(From OE-Core rev: a608d74e69ca1efe5f2b176c000fb8212797d056)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using busybox mount the filesystem won't get remounted as 'rw' and bootup will fail.
This fixes the regression seen after switching from 'danny' to 'dylan'.
(From OE-Core rev: 15a91361a0b5a44161d2dbcf2be6240d86123ad9)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add back inetd and inetd.conf files which are needed if
CONFIG_INETD is enabled in the defconfig. Grabbed these
files from oe-classic
This patch is based on the previous patch for denzil:
http://patches.openembedded.org/patch/33235/
(From OE-Core rev: 929c738787b6f513ce235ed5f7753408a570d632)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After using 'bitbake -c menuconfig busybox' to customize defconfig,
do_install fail to detect the changes. Grep configs in ${B}/.config
instead of ${WORKDIR}/defconfig.
(From OE-Core rev: 5c088c2d3b23026752649d077ee44fe3dbe26aa4)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In each of these cases allarch is used where the package in question has a
dependency on things which are not allach and change when MACHINE is changed.
This leads to a rebuild of the package each time MACHINE is switched and
the sstate checksum changes. The dependencies in question are not suited
be being marked as ABISAFE.
(From OE-Core rev: 087a680429efa713a98fbb89f927b046fe07f87c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
task packages were renamed to use packagegroup so fix this reference.
(From OE-Core rev: bcd68f11e479e8a3a95793ab2ed65202c0f71d84)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wrapper script doesn't need a compile or any of the default system
dependencies so lets inhibit them. This also stops the script
being rebuild every time the toolchain changes.
(From OE-Core rev: 7f72562d274dd2c37ce9262bb7fb8a8a6a9a37df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The .inc file sets RDEPENDS for the general font case but the dependencies
don't apply to this recipe. This removes those dependencies, simplifying the
dependency chains a little.
(From OE-Core rev: 71b3a156c11d01565f546f33e3f1e1bea2fafdff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the fontcache class means we can run the postinstall at build time
so this is generally more efficient.
(From OE-Core rev: 00cc684885efa555f7eac7653482f72095b1c443)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that the DEPENDS we're adding is correct in the multilib case by
including MLPREFIX, fixing unnecessary dependencies in those images.
(From OE-Core rev: 1fa8909e24866ffada75daf63225c8daa000b9be)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the names used for the kernel in deploy will contain "AUTOINC"
instead of the final incremental numbering. This fixes the problem by
ensuring data is obtained from the PR service and using the PKG* variables
instead of PE/PV/PR directly.
[YOCTO #4293]
(From OE-Core rev: 1392f959cb8cd50b5a4492899e54f3ed68ef56d7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds two new Terminal classes. It's separated into two, so that opening
a split inside a tmux window is preferred to the other terminal types, but
opening a tmux session is prioritized only slightly higher than screen.
- tmuxrunning: Open a new pane in the current running tmux window. Requires
that the TMUX variable be added to the env whitelist to use it.
- tmux: Open a new tmux session
(From OE-Core rev: 10f64d202ceb230c3c79e09dce182ffce94d1117)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This doesn't work when the initscripts package is not installed (e.g.
when using systemd only) and is not even needed.
(From OE-Core rev: 6c972598c6da17fbec7a4582eb593c31f4283275)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will silence some of the noisy output from mount.util-linux and the kernel
when trying to automount filesystems or devices. Busybox does not accept the silent
option, it uses a loud option instead.
[YOCTO #3935]
(From OE-Core rev: be218292ee3f05afe47545aa8e1625452e0cd614)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes
In file included from /home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/libfdt.h:55:0,
from /home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/work/x86_64-linux/qemu-native/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:58:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:59:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:60:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:61:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:62:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:63:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:64:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:67:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:70:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:73:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:77:2: error: unknown type name 'fdt64_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:78:2: error: unknown type name 'fdt64_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:82:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:87:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:88:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:89:2: error: unknown type name 'fdt32_t'
(From OE-Core rev: dfb0c2cf9799d084a76aa92e243c743d7ff05db8)
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per the previous commit, systemd-udevd is now in /sbin/systemd/.
(From OE-Core rev: ff0fd25206c3c75921d51cb80bcb6c94ca47b405)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>