This recipe doesn't unpack any source, so set S to ${WORKDIR}.
(From OE-Core rev: b82d60aa19ecbe1e4fed6a1ce7077b3d6c620ef4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Confirmed with the author Qi, it isn't needed.
(From OE-Core rev: 6ee6c39df4dea2dcd99cccad771e1326465e96dd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following patches are rebased.
-- Change-to-calling-bswap_-instead-of-htobe-and-be-toh.patch
-- avoid_parallel_tests.patch
The ptest part of kmod is removed because new version of kmod port all tests to
use modules from module-playground instead of copying prebuilt modules to the
repository. So, we cannot use ptest as before. Remove it so that kmod can build
successfully.
(From OE-Core rev: f80d136bdd578468035a88125fa1b84973fd912b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using populate_sysroot for this data was a nice idea but flawed as it
doesn't work in multilib builds. Instead we can use PKGDATA_DIR since
this is consistent over multilib builds. It also turns out to be
slightly neater code too. Hopefully this resolves the problem once and
for all.
(From OE-Core rev: 6cccae3ca54c1177a1d91d23c3e151d74e735ee9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
debug and logging will make kmod and its library bigger than expected
due many strings in the resulting binaries. While these are useful for
development, they are of no use for deployment.
With them enabled kmod is 154Kb, libkmod is 99Kb. Disabling reduces to
kmod 139Kb (10%) and libkmod 83Kb (19%) on i586 stripped.
(From OE-Core rev: 907514c1b2d07231eb6ec63d21ad5dc25e731b29)
Signed-off-by: Bruno Bottazzini <bruno.bottazzini@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the rpm package backend enabled, running:
bitbake <image>
bitbake virtual/kernel -c clean
bitbake <image> -c rootfs -f
results in an image with incorrect kernel module dependency information.
The problem is that the System.map and kernel-abiversion files are needed
for depmod and after the recent kernel changes, these are no longer in
sstate.
Its reasonable to require the kernel to unpack/build if you're
about to build a module against it. It is not reasonable to require this
just to build a rootfs.
Therefore stash the needed files specifically for depmod.
Also fix some STAGING_KERNEL_DIR references which were incorrect, found
whilst sorting through his change.
(From OE-Core rev: b851504dcf5e147c9efb1c7b6a4d22c1a1a87cd7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-Add-missing-O_CLOEXEC-in-kmod_module_get_size.patch is dropped
as it's in the new version.
Change-to-calling-bswap_-instead-of-htobe-and-be-toh.patch is modified
to match the new version.
License chesum is changed but it is confirmed that the license information
is not chagned.
(From OE-Core rev: 234d61aa89deecf909938bfba39601f79bdcfaee)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
INHIBIT_PACKAGE_STRIP variable will make debuginfo lose in shared library.
The test cases of kmod contain kernel modules for many different architectures,
strip and arch gets confused and throws errors. Pack kernel modules in test
cases to avoid strip command failed.
(From OE-Core rev: 3576399ed163cb3136ee1a2077622035d2033158)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to version 18 with an additional patch from
the git repo to address an issue.
(From OE-Core rev: 5a16da19eda60992e094b38ebb185875529b3b4c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I will mark Inappropriate because the patch replaces some functions
unavailable in older versions of glibc.
(From OE-Core rev: fe19e4d13a645efccd778cfd3a7b55fe74498d60)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just one patch has some small changes because the new code
has another fix for unaligned access.
(From OE-Core rev: 1d82fb4f1980bbe3c9cf0fffb45702bddda73307)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O_CLOEXEC is introduced from Linux 2.6.23, so old kernel doesn't have
it, we need check before use.
This patch is much more like a workaround, since it may need fcntl() use
FD_CLOEXEC to replace.
(From OE-Core rev: 44c441222002ee0177100be0431adf91984e90d5)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two patches are not needed anymore, because the changes are
already upstream.
(From OE-Core rev: d0e52b125a58c0556087fcdf1673920e63573e7b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unlike BBCLASSEXTENDed native support, dependencies in kmod-native doesn't get
automatic -native suffix, so kmod-native was depending on target zlib.
* move the dependency from .inc and apply it with right suffix
(From OE-Core rev: ef0a1812cd79a68f30da5b2770cd5c566d6ecf0b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes all had a long DESCRIPTION but no SUMMARY; since the
SUMMARY is often displayed alone by package managers and the default
value ("${PN} version ${PV}") isn't particularly useful, we should
always try to set SUMMARY.
(From OE-Core rev: db02edd2e9d7645592933cbb25ea0ca4d6561392)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildtest-TESTS and runtest-TESTS targets are required by ptest.
In order to have those targets in automake 1.13.4, serial-tests
should be specified since parallel test is assumed by default
and serial-tests is optional.
(From OE-Core rev: b7a0e1c351e396af6470e59c428128789295bd96)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all PR = "r0" from all .bb files in oe-core. This was done
with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i
We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
(From OE-Core rev: 58ae94f1b06d0e6234413dbf9869bde85f154c85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also nail down a previously floating dependancy on zlib, which is required for ptest
(From OE-Core rev: e76181535fce8bd4bb63f55106de4d074cae4e06)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't use htobe* and be*toh functions because they are not
available on older versions of glibc, For example, shipped on Centos 5.5.
Change to directly calling bswap_* as defined in byteswap.h.
(From OE-Core rev: 63edb6b9a8bdf2f5541edd618f2f598185e37223)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make kmod-ptest able to compile with separated source and
build dir. Since kmod test files contain kernel modules for
many different architectures, strip and arch gets confused
and throws errors.
(From OE-Core rev: 61cb45869caaed6578a217effaa72d247395d078)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid parallel-tests for kmod as it remove
buildtest-TESTS and runtest-TESTS targets required by ptest.
(From OE-Core rev: e1a3ff7d455889e4c6b899227e8ca1919a443b22)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update is a requirement for systemd-206
(From OE-Core rev: faacfeb7cb7bed9ad5eb387d358309a2b1d40f06)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install kmod test suite and run it as ptest.
(From OE-Core rev: 152c973227e41b7736457b7f8c40849cc71b45ca)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Git packages should have the following format for the PV variable:
version_tag+git[r|\-|]?AUTOINC+git_revision
Git packages should include git token inside the PV variable.
(From OE-Core rev: 70d0938c304cd49e08cbcb28e391e7ace8e666e0)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel and its staging directory are machine specific so the wrapper
needs to be as well. Also take the opportunity to remove the default
dependencies of the recipe since its a script and doesn't need the cross
compiler. This gives the build a little more scheduing freedom.
(From OE-Core rev: 1cc2ac769baae19b54184df5f43a3e77c1743c29)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the build path to STAGING_KERNEL_DIR was being embedded into the
package post install scripts. We avoid this behavior by generating a special
depmodwrapper script. This script contains that hard-coded path, ensuring
that re-use of the sstate-cache (and/or packages) will always run through the
wrapper generated by the current build with a checksum that includes
STAGING_KERNEL_DIR.
[ YOCTO #3962 ]
(From OE-Core rev: b18c61bae4d7161c087a004bba3c696006f7a2f6)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kmod will fail to build with the following error because O_CLOEXEC is
not defined:
| libkmod/libkmod-module.c: In function 'kmod_module_get_initstate':
| libkmod/libkmod-module.c:1640: error: 'O_CLOEXEC' undeclared (first use in this function)
| libkmod/libkmod-module.c:1640: error: (Each undeclared identifier is reported only once
| libkmod/libkmod-module.c:1640: error: for each function it appears in.)
| libkmod/libkmod-module.c: In function 'kmod_module_get_refcnt':
| libkmod/libkmod-module.c:1754: error: 'O_CLOEXEC' undeclared (first use in this function)
| libkmod/libkmod-module.c: In function 'kmod_module_get_sections':
| libkmod/libkmod-module.c:1913: error: 'O_CLOEXEC' undeclared (first use in this function)
| libkmod/libkmod-file.c: In function 'kmod_file_open':
| libkmod/libkmod-file.c:282: error: 'O_CLOEXEC' undeclared (first use in this function)
| libkmod/libkmod-file.c:282: error: (Each undeclared identifier is reported only once
| libkmod/libkmod-file.c:282: error: for each function it appears in.)
Since we are only using kmod-native for depmod, and it's a non-threaded
user of this libary being built this should be safe to override O_CLOEXEC.
Keep in mind this is ONLY effecting the native builds and not what is
being shipped in the root file system.
(From OE-Core rev: edcb57fe308979cc5b92359d064e32bb70d4ad76)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this it can't reautoconf or run configure since it depends on pkg-config.
(From OE-Core rev: 7673cd498a50f59b0e2954341de0e8c6913d374f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, the installed files get mangled when a dash shell is used.
(From OE-Core rev: 59db7976fa870084af19d880e594b0e94678cf19)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit breaks pkgconfig and after discussing it with the kmod and udev maintainers the conclusion was reached that putting the libraries in /lib instead of /usr/lib is not supported.
This reverts commit 6b74f2461735272bd950a4f060dab6e778a36f92.
(From OE-Core rev: 7163ebd92a799b8f000b2b6f303b20de468b5f90)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PROVIDES does not need _${PN}
* CONFLICTS should be RCONFLICTS
* opkg needs RREPLACES to automatically remove older module-init-tools
instead of just reporting it conflicts with kmod
SHR root@gjama ~ $ opkg install kmod
Installing kmod (7+git02629fa02e96763db7460a930239cc93649a52f8-r0.0) to root...
Downloading http://jama.dyndns-home.com/org.openembedded.shr-core//armv4t/kmod_7+git02629fa02e96763db7460a930239cc93649a52f8-r0.0_armv4t.ipk.
Removing package module-init-tools-depmod from root...
update-alternatives: removing //sbin/depmod as no more alternatives exist for it
Removing package module-init-tools from root...
update-alternatives: Linking //sbin/insmod to ../bin/busybox
update-alternatives: Linking //sbin/modprobe to ../bin/busybox
update-alternatives: Linking //sbin/rmmod to ../bin/busybox
update-alternatives: removing //sbin/modinfo as no more alternatives exist for it
update-alternatives: removing //bin/lsmod as no more alternatives exist for it
update-alternatives: Linking //sbin/lsmod to ../bin/busybox
Configuring kmod.
update-alternatives: Linking //sbin/insmod to /sbin/insmod.kmod
update-alternatives: Linking //sbin/modprobe to /sbin/modprobe.kmod
update-alternatives: Linking //sbin/rmmod to /sbin/rmmod.kmod
update-alternatives: Linking //sbin/modinfo to /sbin/modinfo.kmod
update-alternatives: Linking //bin/lsmod to /bin/lsmod.kmod
update-alternatives: Linking //sbin/lsmod to /bin/lsmod.kmod
update-alternatives: Linking //sbin/depmod to /sbin/depmod.kmod
(From OE-Core rev: 8de7f8045f28aecfe796afcdb013c557ce9d1372)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also helps avoid QA errors about binaries
accessing contents from /usr/lib
Also fixes emptry libkmod problem since now
the files are installed in expected place
(From OE-Core rev: 6b74f2461735272bd950a4f060dab6e778a36f92)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* until it's decided it should be installed in base_libdir or libdir
* fixes libkmod packaging
(From OE-Core rev: 87249372b4a9951f9e4dc6acece950718382a164)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton
Chen Qi
Robert Yang
Richard Purdie
Gustavo Sverzut Barbieri
Chong Lu
Saul Wold
Cristiana Voicu
Otavio Salvador
Martin Jansa
Paul Eggleton
Tudor Florea
Ting Liu
Khem Raj
Emilia Ciobanu
Mark Hatle
Eric Bénard
Matthew McClintock
Radu Moisan
Koen Kooi