I changed the description to match that which is used in the
WORKDIR variable.
(From yocto-docs rev: 7d9071c2bb99e7c3f3eeae9ddf0abc34563c6725)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* is it technically correct to say there are now 5 BSPs? as in, does
genericx86-64 count as a new BSP distinct from genericx86? [aside: are
there any plans for a MIPS64 BSP?] - rpjday
MIPS64 is under development. - scottrif
* if scott is up for it, a couple more variables for the variable
glossary might be BASE_WORKDIR and TARGET_VENDOR, which i would have
added to that variable list but they don't appear in the glossary
- rpjday
Noted. - scottrif
(From yocto-docs rev: fae6f8baebedaa72f5e37b4f1a39a9accf9b196c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistent use of the way directory names were
handled throughout the YP documentation. I have scrubbed the
set and replaced many instances such as the following:
meta/<something> replaces /meta/<something>
poky replaces ~/poky (except in some very specific examples)
I basically got rid of leading slash characters.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae2e451ed8f61484d04b30017021912c4493a441)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
This was reviewed by Alex and an ordering change was needed due
to the order of how things are created during the workflow.
(From yocto-docs rev: 0c630fed9f9a609c1ca13359efe47cad6f60e00b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This site has disappeared and I don't think there is a
replacement.
(From yocto-docs rev: 711488b664e1da7f3a4c64af3fbd4012bfb44d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #5368]
Updated the figure to not have the tarball method in there
for setting up poky repo locally. Also, added specific references
to the environment setup scripts.
(From yocto-docs rev: 7c6ececaf8eb987206567077f42213dbe4cdc4f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
Adding a BB Commander project location that is the same as your
Eclipse workspace causes an error. I have added a note warning
the user to not do this.
(From yocto-docs rev: 0eca6618be8e4765b8513fb5951257ec17cdd355)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a step on making sure they have Oracle JDK in there
to the section that builds the plugin. Also, removed the
third method to install the plugin.
(From yocto-docs rev: cfd2b88717a709049155a8ff15134b617fc6e172)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YP 1.5 default kernel is 3.10. This is a change from 3.8 in
the previous release. This change affected several areas of
the documentation.
1. The BSP Guide had a crownbay BSP structure that did not
account for the new default.
2. The yocto-bsp tool output still asked for the 3.8 kernel
as the default.
3. The recipes-bsp section had 3.8 used and had some bad
listings that had to be changed.
4. The recipes-graphics section had 3.8 used and also had some
stuff supporting two versions of the graphics (emgd and
noemgd). I had to pull the emgd stuff.
5. There were miscellaneous spots in the dev-manual that were
referencing 3.8 as the default kernel. Particularly the
list that shows what kernel repositories we have. That needed
updating.
(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First pass at changes to support Eclipse Kepler 4.3 release.
(From yocto-docs rev: 265bc3f4ae3442b2fd0490d0f4558c7a584cb31c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through the "Working Within Eclipse" section and set up
structure to add in the Kepler support and drop the Indigo
support. Along the way, I formatted the entire section to
hit within the 40-character limit exclusive of the links,
which always overrun.
(From yocto-docs rev: 762291589382f7ef71e77f8c92dae2371f3ae6e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the manuals to reflect the recent replacement of atom-pc with
genericx86.
(From yocto-docs rev: 8f77006d74b77000f56b64581cb5f6474f53a4f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list was somewhat out of date. Robert's patch fixes it.
(From yocto-docs rev: 8c3c07872a7202315a7501dcd56fb7347668feae)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple words that were fat-fingered and fixed them.
(From yocto-docs rev: 593fd043f350bbce302c3de7dce0ab4bdbd2f247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should be "User-Space".
(From yocto-docs rev: 68bd187b9d0f3aeb8bc173fa49a97e5b01717661)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>