The list was somewhat out of date. Robert's patch fixes it.
(From yocto-docs rev: 8c3c07872a7202315a7501dcd56fb7347668feae)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note in the bsp-guide to point back to the main
new section, which is in the dev-manual.
Made some small edits to the main section in the dev-manual.
(From yocto-docs rev: 4105c8edbdc531b2a941d7f7282325fae763f059)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some minor fixes to this area as directed by
Paul Eggleton. This represents a clean second draft that
can be reviewed. ]
(From yocto-docs rev: d3380d698d36e83aab16ac74e713ab03baef60b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are review comments from both Paul and Bjorn.
(From yocto-docs rev: 773300f78b20bd601cbad750cfe32263fbe9d127)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Tracking Bugs" section mentions how to enter a bug using
Bugzilla. I added a new step just before the step that says
to submit the bug that tells the user to be sure to copy the
correct people. The link goes to the section that describes
how to figure out who is responsible for code.
(From yocto-docs rev: 64e58402490267a339c9bade969850da50f39cf1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided three ways to dig out the information on who might
be contaced about a change or patch to an area of code:
1. See the "maintenance.inc" file.
2. Examine BSP README files or the MAINTAINERS file (for BSP)
3. Use the 'git shortlog -- <filename> command to see who
has committed the bulk of the changes for a particular file.
(From yocto-docs rev: 0757a2edddb55bcce2ea1507501220c3097f0a22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple words that were fat-fingered and fixed them.
(From yocto-docs rev: 593fd043f350bbce302c3de7dce0ab4bdbd2f247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should be "User-Space".
(From yocto-docs rev: 68bd187b9d0f3aeb8bc173fa49a97e5b01717661)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Further minor edits to make the example consistent.
(From yocto-docs rev: 863a955f5cf119a38db4950101270bd5a53da027)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Realized that a better organization of the sub-sections could
be applied. Pulled the last two sections up a level.
(From yocto-docs rev: d196db9bf1f88aa0677453396abdd61bf5d724dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Applied changes per Jessica Zhang's feedback from the bug
entry in Bugzilla. I added some missing steps and also
tried to make the section stick with one example throughout.
(From yocto-docs rev: f995006a90a3646c92d54dc96a8fceae4de758eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor text editing. Also, updated two figures to be
more recent. One for the Index of Releases and one for the
YP Downloads page from the website. They were very dated.
(From yocto-docs rev: 59255d7c0175a5280239d070ce902079229cf909)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the transcripts used to set things up. I also changed
the kernel used in the examples from 3.4 to 3.8.
(From yocto-docs rev: d83e5a5a73777baf95b5c4558f25a5b0b27c204c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was VERY dated.
(From yocto-docs rev: 6a12809fdd60c707592fff88a5b246a94d6ca220)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to reflect the changed contents of this manual.
The section was rather dated.
(From yocto-docs rev: 08d126d611155e64d94084378cc0bb1f4cde4924)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rough text for a section within the layer section that
introduces and describes a bit how the new yocto-layer
script works.
(From yocto-docs rev: ee56a264600df9fe250e73b60c8dadd6f8e55009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made the text more general and explanatory for what the
purpose of the chapter is.
(From yocto-docs rev: 23b595560770d2ffe1465b4a9f18bcf734b7b083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Applied changes from Paul to the read-only-rootfs section.
2. Applied changes form Paul to the customizing images by using
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. This
was a simple rewrite of a sentence.
3. Updated the note in both the IMAGE_FEATURES and
EXTRA_IMAGE_FEATURES glossary entries to specify inside
of an image recipe (more specific).
(From yocto-docs rev: 762b9e4d3b45a9602284cf4dd1ac281dcbbed7f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Paul Eggleton's review comments on the section that
tells about enabling and disabling features through the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. Using
different wording other than "add" features. Also, some
rewriting of an area that was rather clunky.
(From yocto-docs rev: 13e44345830130318e11b6877e2aff03e6c8ea4f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from Paul Eggleton to augment this
section with more information.
Performed a spell check on the entire chapter.
Made the term "postinstall" consistent by defining its first
use in sections a "post-installation (postinstall) script".
(From yocto-docs rev: 179f478777fd02e3fa56d80951ce3eab350fc189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* BBFILES should be appended to with +=
* BBPATH should be appended to with .=
* Immediate expansion is not necessary for BBFILE_PRIORITY
* Immediate expansion is not necessary for references in layer.conf
to LAYERDIR since these are automatically expanded at the end of
parsing the file (and have been for some time).
* Add collection name override to BBFILE_PRIORITY example
* Fix comments referring to old structure ("packages directory" or
"recipes directory")
(From yocto-docs rev: 0aaac8f5ad97c802ebe1d4f3ffb7987050533292)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I cleaned up the wording to indicate best places from which
to use the IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables.
(From yocto-docs rev: 68e9c8b3f8d9fe3a086ad77bc0c3b465380476b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that talked about IPK-specific information for
installing updated packages onto an existing running target
system is parse and really needs to be in the section that
talks about setting up a package repository. I moved it to
the end of that repo section.
(From yocto-docs rev: 3b1c5858527cba908a5acff1ddc924630cc954b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple sets of review comments from Paul applied here.
1. Added the "read-only-rootfs" item to the EXTRA_IMAGE_FEATURES
variable description and a link to the appropriate section
in the dev-manual.
2. Pulled the how-to-create a package repository section out
of the section on how to customize an image with the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES section and made
it a stand-alone section in the "Tasks" chapter of the
dev-manual.
3. Integrated the SSH server example into the main topic
because we don't want an isolated sub-section within a
main topic.
4. In the image features section of the ref-manual, I fixed
the link with the "read-only-rootfs" feature to go to
the now-isolated section on how to do that instead of
going to the customizing an image using the IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES variables section.
(From yocto-docs rev: 9c79b5f40d8dc6b37fbe636a2459f89b70bd8ea8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes are the review comments from Paul Eggleton regarding
setting up the optional package repository on the host that
can be used by Smart. These changes reflect the fact that
the task is not package-type dependent or host web server
dependent.
(From yocto-docs rev: 779989878bcc9501ddc4570519d93325442a8493)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created two sub-sections in the original section. One
covers how to customize the image by choosing the particular
SSH server and the other has the new information on creating
a read-only root filesystem.
(From yocto-docs rev: a0ce1a2784f991b7c0871cbc0783e32dde37e314)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to add a link and create a more active voice throughout
this section.
(From yocto-docs rev: 2cb62dab03d5ca4de9c9310c4d075fc643b7e68a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created the first draft of the new "Setting Up Runtime
Package Management" section in the dev-manual's common
tasks chapter.
Updated the "Packaging - package*.bbclass" section in the
ref-manual to mention this capability and point off to the
dev-manual's new section.
(From yocto-docs rev: d91c8530dba20839f36c5e247cc447adbedac7fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Second thoughts caused me to adjust this title again.
Also fixed the cross-ref in the FAQ.
(From yocto-docs rev: 0553790236c60d30306b796587cd5b5213456aff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I think this is better wording.
(From yocto-docs rev: 4f673b0c3df4a7af4ec54325722e407d12a0e7fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2568
These changes are based on Darren Hart's second review of this
new section.
(From yocto-docs rev: b61ef2b6cf96b45666e0f75753b76e0f875663b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These notes will be deleted eventually.
(From yocto-docs rev: 3c4894eaab5e87efbc06132f8c46e69623a72842)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a first draft of a section titled "Selecting an
Initialization Manager." The text was based on information
from Ross burton. This is for the "systemd" support that
is new for 1.4. There is a lot of work left on the section.
This is the first draft.
Reported-by: Ross Burton <ross.burton@intel.com>
(From yocto-docs rev: ad358b96834879abe8a10d89e77453e30799ac0a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
First pass at altering this section based on changed methods
and Jessica Zhang's instructions. Rather than fully removing a
couple of sections that have quite a bit of information, I
decided to comment them out for now. Once the material is
reviewed I can remove the sections for good.
(From yocto-docs rev: bde7771166a178dd283fc9baacbee5239c679251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2568
Applied Darren's review comments where I could for his
review. Not all questions are answered but this represents
the third draft of the section.
(From yocto-docs rev: da0bc9542259238caf7b474bb15157d80a2b3651)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1548
Added a new section to describe how to install multiple versions
of the same library in parallel on the same system.
Also, I added some introductory text into the parent section
that houses the three sub-sections that deal with library
use-cases.
(From yocto-docs rev: c77538bc8adae90e4b900f129b63988fa3ab6c9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1548
Created a new section called "Working With Libraries". This
section is a parent section for all the stuff about libraries.
Previously, there were two other sections dealing with libraries:
one was mulitlib section and one was about loading static
libraries. It makes sense to have a parent section now that
gathers the three sub-sections together. I have reorganized the
chapter structure to accomplish this.
Also, I placed some IRC chat notes temporarily into the new
section that will discuss how to load multiple versions of the
same library in parallel on the system.
(From yocto-docs rev: 5d150421bcd660a191aff63ebabd577cc19bd421)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new bullet as a tip for best practices that addresses
how we address bug 3071 and 3274. We are suggesting they enable
a PR Service if they are using continually incrementing PR values
when package feeds are published or used.
Reported-by: Richard Purdie <richard.purdie@linux.com>
(From yocto-docs rev: b90497f139b1b6f7ab5510313eb297d5d7fb4e68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2827
Replaced the path where one findes the binary for the meta-
toolchain to a more recent example that was built from
the beagleboard and using arm.
(From yocto-docs rev: 020a7fcd7f99c50d32e831b8d51150e8db8ab4e9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording on when a user would consider using
the BBMASK variable. It is more suited for excluding things
that cause problems rather than for speeding up build time.
Reporte-by: Paul Eggleton <paul.eggleton@linux.com>
(From yocto-docs rev: 993d7c953a37747297238cd9af53a1f00e737df9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied two comments sent by Paul Eggleton.
(From yocto-docs rev: d3b61e07b5b9db6a582c76f66a984b9f27812a6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are basically Paul Eggleton's review comments.
(From yocto-docs rev: bb92dbb968013952c4308b9aeed48223f49c866d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The final paragraph of the "Creating Your Own Distribution" really
should have been in list form and should have some cross-refs
for other parts of the manual. The paragraph is now in list
form and there are some references.
(From yocto-docs rev: 02c4b2e99a3237d1506887659be0e67d6b000648)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple of notes to point out the ease of creating your
own distro and not just relying on a Poky distribution. One
note is at the very beginning of the manual and mentions
Angstrom as an example of a distro based on the YP. The
other note is at the beginning of the second chapter.
(From yocto-docs rev: 1525a5e34c615cbfd25aeb12cc7a27ef95b51eab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "var-" part of links for the creating your own
distribution section.
(From yocto-docs rev: d419cd67084ce25d0d4b4437d8ce4cec180da59a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3403
Provided a note at the front of the "Adding a Package" section
explaining the exception when using a closed curly brace character
inside a shell function with the character at the front of a
line with no leading spaces.
(From yocto-docs rev: a1c0972083751444a8cc89aa8a026f273d98e23e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1622
In the introduction paragraph I added references to the three
multilib examples that are located in the meta-skeleton layer
within the Poky repository.
(From yocto-docs rev: f284525c6f9b655a61a0ac052a637b0aedb5b694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
Applied several recommended changes for the section describing
best practices when using YP in a team enviornment. these
changes were from Dave Stewart.
(From yocto-docs rev: 7efc9864dc6757e3cf5c026f3c1785e5947cbfec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
Applied various review edits from Richard Purdie. Additionally,
I ran a spell-check on the chapter and caught some typos.
I fixed these as necessary.
(From yocto-docs rev: 794a13d26bb7a9e268b16f809158a6af58cc3ce8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
First draft of a re-written section that describes best
practices for scaling the YP over a large development
effort. this draft is based on Richard Purdie's text
he sent to me.
(From yocto-docs rev: e5135f76946997a0a060dd16c0b62308be4f6048)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3684
These changes help tie in the relationship between how the OE
build system uses checksums and such and the PR Service that
can track revision.
(From yocto-docs rev: 39a3010a3bb4b2c1d37aef60984ac16e85b56aac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3552
Added some links to the FILESEXTRAPATHS and SRC_URI variables.
These links connect appropriate sections to a newly improved
section on FILESEXTRAPATHS glossary description.
(From yocto-docs rev: a58e7c6f013393c87381411f918e16a8f04d55d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2684
Applied some review comments to the section from Richard
Purdie.
(From yocto-docs rev: 772617a45df10e5e42364854fe03d8aad7cb46b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These types of links must not span multiple lines in order for
mega-manual to process them.
(From yocto-docs rev: bcea042cd796a51d866f82399b2fd0cc89ec9e2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hi,
the generation of eclipse help files has been merged from the timo
branch to the master. Since the creation of the timo branch there have
been some changes to the master branch (e.g. new documentation,
renamed documentation).
This patch set does some cleanup for the renamed documentation and
adds eclipse help generation support to the new documentation.
01: Removes the 'the' from the document titles
02..04: Cleanup obsolete artifacts resulting from the merge
05..08: Add eclipse help generation for ref-manual
09..13: Add eclipse help generation for kernel-dev
14..18: Add eclipse help generation for profile-manual
Best regards,
Timo
This patch set originally contained 18 patches. I (Scott Rifenbark)
had to push these changes as two parts. This is the first part.
It does not include creation of the three cusomization files.
(From yocto-docs rev: 9b1889f6e31ee70dae704fa08763fb9196616dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bulleted list to the "Terms" section to help define
some toolchain recipes such as gcc-cross-initial,
gcc-cross-intermediate, and so forth.
Added a cross-reference link to the term
"Cross-Development Toolchain" in the the "Working Using
Stand-alone Cross-development Toolchains" section.
This gives the reader a way to see more on the toolchain
recipes.
(From yocto-docs rev: 2cb612424c0cf6addfd8bce8a0ef77665c35bd9a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Received a patch from Robert P. J. Day but deleted it from
my Thunderbird account so could not apply it directly.
I applied most of his corrections. A couple I left alone.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 2cadd5265fcb5cc281c22ccae81260a6633229e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3664
Added some information in the note to point out that not all
append files add files into the mix. Some just exist to add
build options. And, in this case the _prepend part of the
FILESEXTRAPATHS statement is not necessary.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 388c441341006227be2f9e7d42bb1c509c32790d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3272f0d51e3d09f4ffd96b7322f66ffd878d3714)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two things fixed:
1. A couple examples for setting up a layer.conf file were
using the meta-yocto configuration file as an example.
Turns out this is a bad example because the BBPATH variable
is appended to the LAYERDIR when setting BBPATH rather
than the other way around. That is because meta-yocto
is a distro layer. BSP layers, however, are not distro
layers and are the norm here. So I switched up the way
BBPATH was set and actually called out meta-yocto-bsp
config file as a template.
2. Added a link for the BBPATH variable in the
FILESYSTEM_PERMS_TABLES variable description in the
glossary. Just happened to notice this so I fixed it
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1a594b6dde1a494a5f7322b510e1e67d23635298)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
I added more information to the variable desription in the
glossary for BBMASK. The information included a bit more
syntax information as well as some more complex examples.
I added more reference information to the "Excluding Recipes
From the Build" section to help better describe how the
BBMASK variable works.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f10f43a543e7b0892863e165d2902741a8823009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The chunk.quietly option disables the output of the docbook
chunker. Creation of a new html file is now longer printed to the
console. This provides a much cleaner output of the eclipse makefile
target.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a couple spots in the manual to be clear on meta
not being a strict requirement for a layer name.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ffd80ade292a462a77981c8c19bb71a19333a397)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3663
I added wordings to indicate that meta-intel is not required
to create a BSP layer. But, the example presented uses
meta-intel.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 746948cd1d612f0b837e70a7e92e4081d379cb50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of section 5.15.1 incorrectly implies that only copyleft
source will be archived to the specified directory, when in fact
copyleft filtering is disabled by default.
(From yocto-docs rev: 8eacef8acc398bc3d881d657d27c8827f05e3227)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example doesn't account for an extra level of directories
that organise the sources by machine type.
(From yocto-docs rev: 844e8b8f28ab765e59fdbee40e00c973b1b00d89)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through and got rid of all references to the old
YP Kernel Architecture and Use Manual and replaced with
appropriate references to the new YP Linux Kernel
Development Manual.
I also laced in appropriate references into various sections
of the new YP Profiling and Tracing Manual.
Also, updated the list of resource manuals to reflect the
new manual set (addition of kernel-dev and profile-dev and
removal of kernel-manual).
(From yocto-docs rev: ef531ad65c9b749dad5e8e39b060bf1641e4fa38)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Terms" section, I enhanced the "Metadata" term to include
a bit about Metadata in the context of the kernel. This type of
metadata is discussed at length in the YP Linux Kernel Development
Manual.
(From yocto-docs rev: c6f48bc4c33850eaa1dbf5867759a19d373766ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day suggested adding http://lists.yoctoproject.org/
listinfo to the list of mailing lists, which included yocto,
poky, and yocto-announce.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f322c60814471e4216e112b193e5769fd6008a79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added "Debian" as a distribution for best results.
2. Fixed a link to the Hob page and two links for the
Build Appliance.
3. Three typos fixed and a few grammar items fixed.
(From yocto-docs rev: 0b381094ed9cc2d66895d4ad7c63005c8a918eb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated a note that points the reader to the maintainers list. The
note in the master branch pointed the reader to a nonexistent (old) file.
(From yocto-docs rev: d947d6d9bd42562a84ad3ac90e4c2052f421119c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3176]
Several places throughout the YP manual set examples are given
for the bblayer.conf file. For release 1.3, a bug existed that
surfaced when a user removed either the meta or meta-yocto
layer from this configuration file. The bug has been fixed and
the ripple effect through the YP documentation set affected
several manuals.
Fixes include updating the code samples that show bblayer.conf
so that they now include the BBLAYERS_NON_REMOVABLE variable,
a new glossary entry for the variable, and an explanation of
both BBLAYER and BBLAYER_NON_REMOVABLE in the section that
talks about the bblayer.conf file.
(From yocto-docs rev: 904b9ec1cd6d823af0e92f6891fc7e434cf2e358)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3445]
Updated the "Installing the Plug-in Using the Latest Source Code"
section for the Eclipse section. This was pretty much out of
whack. I have created new steps that involve running the setup
script and then running the build script. The new information
still needs a review.
(From yocto-docs rev: 5903964a9583c6051abefa4a7b944b59a76825b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3274]
I have added a new area at the bottom of the current
"Using the Yocto Project in a Team Environment" section.
This section is the spot for addressing what Richard Purdie
coined as "How to use YP in a work group." For now, the
changes are based on the information that Richard placed in
the Bugzilla entry. Presumably we can build on this information.
(From yocto-docs rev: 92c5d1b6ac6b553fab19410170364dca40123c59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Applied a few changes based on Paul Eggleton's review
of the section.
(From yocto-docs rev: 54c2b1577ba062e09a8df14767257147e33a939f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Updated the "Using a Development Shell" in the dev-manual to note
that the OE_TERMINAL variable is the thing that controls what
terminal is spawned. Added a reference into the new
variable description.
In the poky-ref-manual, I created a new glossary description for
the OE_TERMINAL variable.
(From yocto-docs rev: 25001eba312c4109b4aaa79b334d27e144ef0d3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Updated the section on using a development shell
(From yocto-docs rev: 37b43dcb19dda747b7e90ac2e393dad29e9d87a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3366]
Created a new section titled "Handling Optional Module Packaging"
in the dev-manual. This section is based on the wiki page
that Paul Eggleton authored.
Created a new glossary entry for PACKAGES_DYNAMIC in the
poky-ref-manual.
(From yocto-docs rev: 5af3da5e2af15c33e5e6eb7a9ef3ab3c0923284f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3396]
Spaces in file and directory names is an issue for the build
system and throws an error when sourcing the environment
setup script. I added key notes in several areas of the doc
set. I also added some cross-references to the oe-init-build-env
section in some other areas where running the script is discussed.
(From yocto-docs rev: 1d102e91ba77391096749bd7df6c05b2b695b33f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to the poky.ent file to change the three variables
needed to build manuals for 1.4.
Made new entries in the manual revision history tables for the
five manuals that have them. Each entry shows the "TBD" release
coming up.
(From yocto-docs rev: f7f75a238d709698f1582ce22e209c09ee60581b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made minor changes as needed due to some new sections, links,
and capitalization standards.
(From yocto-docs rev: bc966e5a78dadd14ecf1896a36e40a9b256bae77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the sections on the "Git Workflow" in Chapter 4 and
the "Patching the Kernel" section in Chapter 5 per Tom
Zanussi's review comments. Minor technical changes.
(From yocto-docs rev: fd8a291349c06328adebd37f8a9bbeaa49adb44c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure used to be at the end of the development manual.
I have removed it from both figures directories and taken
it out of the TARFILE list in the Makefile.
(From yocto-docs rev: ad8fcfc4bddb6bcee0e1a4ece78cd87ab0d51b6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updates to the Git Workflow section based on feedback from
Darren Hart. These changes simplify the flow and make it
generic.
* Updates to the lttng user space tool used from within
Eclipse. The legacy version of the tool is no longer supported
so it had to be edited out of the description and replaced
with the 2.0 version.
(From yocto-docs rev: 81d2b79035fc99f92364bfef2c76076738cbaa52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback from Paul Eggleton suggested to not use the linked
term "Source Directory" in the last paragraph of this section.
Reasoning being that it is mis-leading in this case. People
reading this will be thinking more along the lines of traditional
source code rather than our establishe "Source Directory" term,
which in the doc set refers to either the unpacked poky tarball
or the cloned poky Git repository.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f9bfcdebf85481839df01442ee81c4c9e8ee559a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the release month in all the manual revision history
tables to say "October 2012" from "Sometime in 2012".
(From yocto-docs rev: 1fc9313fe6c69db3d8cece6d940f78a2f0dc8386)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Edits to get the patching the kernel section more sane.
* A tweak to the opening sentence of the compliance section to
rid it of the split-infinitives.
(From yocto-docs rev: 8e2ff293e85a602efd98aceb20da5a2ea5f2a34d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to try and clean up the process.
(From yocto-docs rev: 9c4fbcb473dc594647ba8779162379a745f8f8d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some general edits to the new "Patching the Kernel" section.
Also had to remove a couple of images no longer used in the section
from the Makefile "TARFILES" variable.
(From yocto-docs rev: ac61e22e2f89926fbbda56fbaa4384c3c5156360)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the temporary text in the new "Patching the Kernel" section
that was copied from the old appendix A. Fixed the PRINC variable
in the creating a new layer example.
(From yocto-docs rev: 3eba77a81d3460866638a2f2d6b7c27d9dd1a2be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "kernel-example-repos-generic.png" file as it describes
the bare clone method for kernel modification. We are removing
that from this manual.
(From yocto-docs rev: c25c4f662c2f8a83fd9b09583646be9dbe01424c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel workflow section was re-written to reflect that the
kernel appendix has been removed. Also, changes to the flow in
general no longer make reference to the bare clone and the copy
of the bare clone as a method used to modify the kernel.
Many links were modified in other manuals as well.
(From yocto-docs rev: 38adbcb00d4305029cfa94e5ef047da41823f021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the bare clone and the copy of the bare
clone are no longer needed. The description for the kernel
workflow has been reduced to discussing only modification of
the temporary source files. We are no longer talking about
creating a bare clone and copying it as a way to modify the
kernel in this manual. That topic will be described elsewhere.
(From yocto-docs rev: f6a25e5e3763ea7a1f8a81ce377e3b520143b852)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Common Tasks" chapter is better suited as the last chapter in
this manual. So I moved the development workflows up a chapter.
(From yocto-docs rev: 19f0a6411c065388b5bd0083338b164b43baff0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is now gone.
(From yocto-docs rev: d744e76034ff2711a8c40b9bb1982971d28a04b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is being removed. This broke a lot
of links. For now I have moved the information into a new section
called "Patching the Kernel". I have preserved the information
by adding the old appendix file as kerne-appendix-orig.xml.
(From yocto-docs rev: 994235a69362dfb0114ef9001ea7f2f2e2fdc5c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the section A.2, which had an example of how to use
menuconfig in the kerenl example appendix. The information is
now merged into the similar section in Chapter 4 "Common
Tasks." It was decided that the Appendix A examples in the
manual were too detailed for a general development guide.
(From yocto-docs rev: f88ec421b257657f02cc0f132ec2580c17f07cef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this statement in the linux-yocto-3.4.bbappend file needs to
have the comment removed so the source can be found.
(From yocto-docs rev: 821162221818f5ce53bb903aeef57c85314f5083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Kernel example appendix I changed some remaining 3.2
kernel strings to 3.4. Also I added the OE_INIT_FILE variable
from poky.ent for use instead of the "oe-init-build-env" string.
(From yocto-docs rev: 1d9d8d72d197bdd81756eed7fe1529f341de6089)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time the kernel revision is bumped (e.g. 3.2 to 3.4)
Some of the figures would be out of date. The reason is they
had pathnames that included the release of the kernel.
For previous YP releases I was adding logic to the Makefile
to be sure to catch the right files dependent on the branch
from which the documents were being built. This scheme is
not scalable so I decided to make the figures generic by
adding a note within the figures explaining the place-holder
"<x.x>" as part of a pathname. Thus, three new figures were
added to the folders directories of the dev-manual and the
mega-manual. Correspondingly, the 'denzil' version of the
figures were deleted.
I modified the Makefile so that if the BRANCH is not edison
or denzil then the generic figure set is used. I have to retain
the logic for both edison and denzil to cover the case where
a user clones or sets up an edison or denzil repo and then
builds out the manuals. Basically, it had to be backwards
compatible for releases prior to danny.
(From yocto-docs rev: 8283eed4b0b9ec164b87db99c35231f8731ac443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Danny, the "kernel-example-repo-<release>.png" file changed to
"kernel-example-repo-danny.png". To correctly make the dev-manual
and the mega-manual some things needed to change:
1. New figure created and added to both the dev-manual and the
mega-manuals figures directory.
2. The "kernel-example-repo-denzil.png" files from the dev-manual
and mega-manual figures directory was removed.
3. The Makefile was adjusted so a new BRANCH=danny area now exists
to set TARFILES for both dev-manual and mega-manual.
(From yocto-docs rev: 8b2ff6b657a1486559799e219baaec9fde2e5c6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the beginning of this appendix that references
the yocto-kernel script as a way to quickly manage kernel patches
and configuration.
(From yocto-docs rev: 35cd7f6a9722120e47ae8b422dd86593497ebf1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix is antiquated and needed removed. The BSP
development example is now in the BSP guide where it talks
about running the yocto-bsp script.
(From yocto-docs rev: 892ff450d79a7564a72f11eb7510d349ca71d47a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Appendix A (BSP) example had some rippling affects
throughout the doc set. There were several links into the appendix.
All these links had to either be modified (if possible) or simply
removed since the appendix will be removed.
(From yocto-docs rev: fff35abd87e945de1806eef63a56a956d104bf92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section now points into the BSP Guide where it talks
about using the yocto-bsp script to create a BSP. The prior
method was by hand and described in an appendix (A) of the
YP Development Manual.
FYI - this results in the removal of Appendex A in a future
commit.
(From yocto-docs rev: 5e1c44b1768b79dd1447ea47461b84248bd2111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples were out of date. They did not show the
meta-yocto-bsp layer, which is there now by default.
(From yocto-docs rev: ea2e2e8a259bc3e629fb8087229872b9818a696a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was out of date. I copied in the most recent version
of the bblayers.conf file, which sets LCONF_VERSION to "6" now.
Also, added the meta-yocto-bsp layer to the example.
Additionally, I inserted a Note explaining the consequences of
removing the meta-yocto layer. The note references [YOCTO_#3176]
for more information.
(From yocto-docs rev: 532b72c5c18b2a9a61619164bae6216c91c2ecc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current setting was changed from "1" to "6".
(From yocto-docs rev: 7f5be4b0b2d1e17add774c7ba3b8803ad770a8fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the meta-yocto-bsp layer to the example listing in the
"Enabling Your Layer" section.
(From yocto-docs rev: 95fb13a1049ccaffb3531c93a28a3c480ea1a243)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explain that we test with a set of reference hardware rather than only
supporting hardware that we have (avoiding any implication that the
build system can't support other devices). These are in the
faq entry in the poky-ref-manual for the question of how we can
claim Poky / OpenEmbedded-Core is stable.
* Adjust the language so that it is OE-Core friendly, with a link to
the Development Manual for the definition of OE-Core.
(From yocto-docs rev: 5ff1604dd383b26e918c319fcbe46dd1589cebc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the patch from Paul a bit here to conform to
the style of writing plus to make things clearer.
(From yocto-docs rev: 87abf857cfcd8a0d78a48322fbe9ac5395b6ad30)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the listing of the final SRCREV statements for the
BSP example.
(From yocto-docs rev: 0d0d5994c2653dda1171eaad226bbe1764a04440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are partial for converting the example for BSP
creation from Crown Bay to Fish River Island 2.
(From yocto-docs rev: c7fc78a8453ad363138764aa30e377b56ce49f2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the reference to the Downloads page.
Also fixed the local branch in the meta-intel example so that
it uses the same name as the local branch created for cloning
poky.
(From yocto-docs rev: edac781b37bce0d0bca6a741186cfa53a512b73e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new branch is named distro plus poky revision
(e.g. danny-8.0). I had just the distro in there.
(From yocto-docs rev: 9490849f7f6dc815d1b676b15b3f38f671a49be8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "Source Directory" should be capitalized.
(From yocto-docs rev: 143213545358dd5b6c28c71202bea2e40dbb2522)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quilt and Git flow methods there is a bullet that talks
about incrementing the PR variable. I changed the wording to
be in the context of recipes rather than packages.
(From yocto-docs rev: 64f6230251c023e469a346c0425834b950ed5c9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that describes changing the source code usees the
P* variables extensively to refer to names of the recipes. The
wording used was antiquated and exclusively referred to
"Packages." I changed to reflect the fact that P* variables
in general are refering the recipes and not the packages.
(From yocto-docs rev: bd3ef1c46fc7a3b0b2ff5ab60dc52e125f080e24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some of the links to information for the user-space tools
had become obsolete. Fixed them.
(From yocto-docs rev: 84e72204e34e45d9d8cae876710a46a83b61c0cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the preferred branch for the Eclipse example from
a hard-coded "1.3_beta" to use the DISTRO_NAME variable.
(From yocto-docs rev: 9393c5d1e44a1e326c73353b090c1d1c1a5833da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in the #4 box to include the cross-dev
toolchain.
(From yocto-docs rev: 198ab4326369d8c74225d9de51bf536621ab2251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the item that talks about getting the root filesystem.
Realized that the cross-toolchain was not discussed in this
bullet for the case where a user does not use the ADT
Installer. Added text and references to correct that.
(From yocto-docs rev: ec2f5103471f047f7ed7e53cc22789c74ab506ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an earlier occurence of the "tm" for Eclipse product.
Also, changed the reference for modifying the kernel to point
into the appendex rather than self-referencing the same section
from where the reference originated.
(From yocto-docs rev: a85840611650c9124b6194acca59c8bfe71f566c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I standardized the use of the term "Source Directory" when
referring to the poky directory as set up on the host.
(From yocto-docs rev: 3eaf7a734a4eecab2be2c8e71bee4d6c2cb7788b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made this more accurate by including notes to edit the
source and use of menuconfig within the diagram.
(From yocto-docs rev: 91d3d2e935aab24c4bd96c5921a605cbbb7e3231)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add the 3.4 kernel to the list of linux-yocto-*
kernels as found in the source repository.
(From yocto-docs rev: 98538e2616214f76083697ad3cc886efd183c34e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item that describes where to look for application
development was still pointing exclusively to the adt-manual.
Updated to point to adt-manual for host setup only and then
point to section in the dev-manual for the Eclipse example.
(From yocto-docs rev: 36ac631e23366c4d9f83c2d00cbbd3bc4758aa15)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better display of the SELECTED_OPTIMIZATION variable options
when they appear as a list.
Also, some punctuation added.
(From yocto-docs rev: 73777e545f13eacca9ee466ba852bccd84c17f6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'sdk', when used in general terms should be capitialized.
(From yocto-docs rev: 1d68746ae197620b533a9ad53e71b16c9e4e42b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found other changes for underlying/corresponding wordings
regarding the relationship between .bb and .bbappend filenames.
(From yocto-docs rev: 28f12a4ea97a683281cd8cc0bbceb40d2b896aa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better choice of word here is "corresponding" rather than
"underlying".
(From yocto-docs rev: 3d8b6d6e06b81960df2a7d25b6d54308210cc011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual listed an out-dated example listing of meta-* layers
in poky.
(From yocto-docs rev: 39e2a02301d1d0b609fbc041395dd31f6ba9fa2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for where the "scripts" directory lives was not
conforming to our terminology.
(From yocto-docs rev: 925167c446b86ca09d387d01568db64113412311)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For obvious reasons I changed this one :)
(From yocto-docs rev: 5f3203292f46bea799321e4520668252a46fb599)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>