Applied various edits to the "Writing a New Recipe" section.
Several nits.
(From yocto-docs rev: 17818ff89805e0df3a0445f64a4f9133550fa7d0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several improvements to this section.
* fixed a typo where a YP release was referred to as 7.1
instead of 1.7
* Added a note box to the "Using Variables" list item
elaborating on the expansion behavior.
* Removed the detail around the WORKDIR discussion.
* In the "Loccate or Automatically Create a Base Recipe",
I added the devtool add method to the list of ways to
create a base recipe.
(From yocto-docs rev: 79c86fc3653c747ae42f08528063a8984cdd3b4d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10183]
Added a new variable entry for the PACKAGECONFIG_CONFARGS variable.
With the introduction of the new PACKAGECONFIG_CONFARGS variable,
many places in the mainstream YP documentation that referenced
how to pass configure arguments using EXTRA_OECONF needed to also
make mention of this new variable. I added many cross-references
to the new variable.
(From yocto-docs rev: 00f02d45319bab90b72eab89fcb69cbe8bd05bb5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Applied some rewording to the last bullet of the "Known
Issues" section in the "Enabling GObject Introspection
Support" section.
(From yocto-docs rev: 6cc0c7925984a29a115819195b800e2ecd8b4757)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9707]
* Replaced gummiboot with systemd-boot in the dev-manual
* Replaced the gummiboot class with a new systemd-boot class
* Replaced the appropriate gummiboot variables in the glossary
with new variables SYSTEMD_BOOT_CFG, SYSTEMD_BOOT_ENTRIES,
and SYSTEMD_BOOT_TIMEOUT.
(From yocto-docs rev: 778b620e65cc68531b3c41aeb8f27f2a07eb0d00)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10135]
Some small problems were fixed:
* Added a cross-reference in the FILES glossary entry to the
PACKAGES variable. The two are tied and there was not a
reference to it.
* Removed a redundant "/" character in a pathname example in
the dev-manual.
* Removed a redundant "/" character in an example pathname
in the FILES glossary description.
(From yocto-docs rev: 11a397c232696deece7ac5c6dafcadb87d7a5775)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Added a new bullet item to note that Using QEMU in usermode
might not work properly when running 64-bit binaries under
32-bit host machines. In particular, "qemumips64" is known
to not work under i686.
(From yocto-docs rev: 896beb3fddd427f8327d4ddd35be253866c90377)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
A couple typos here needed fixed. Also, a missing statement in
the JSON example.
(From yocto-docs rev: 8756cb363a70a8b77077a666c62c0f678ffb3d3e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the introduction of the trio of variables used for package
feed naming in the "Build Considerations" section.
Fixes [YOCTO #1882]
(From yocto-docs rev: 4c7efd08f9f543dd3c4f2e6d68c72d16fd7b0b8c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
Updated the "Exporting Tests" section to reflect the proper
local.conf settings.
Added a new section "Installing Packages in the DUT Without the
Package Manager" that describes how to use a JSON file to accomplish
package installation on a Device Under Test without a package
manager.
(From yocto-docs rev: 0275d2a8234a6418f32e802bcf46b7e68053e05a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Re-did the steps to set this server up.
(From yocto-docs rev: 45e073a60ef7b1d540439b621266a9019a3d2947)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the extra server instructions and just left the ones
for SimpleHTTPServer.
Fixes [YOCTO #1882]
(From yocto-docs rev: fb502c608b015c37f361f4b54874ad199a67feb4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Edited the sections in the "Working with Packages" section
beginning with the "Build Considerations" section with text
received from Daniela Placencia.
(From yocto-docs rev: 07a55662d6ac98875555f80f766de263b131185f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the use of this replaceable consistent with the
migration chapter in the ref-manual.
(From yocto-docs rev: 5c2f13f505986d2efc7bfa72c79b933f5a5c5ec1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
Several occurrences of tools-profile and the like had to be dealt
with.
(From yocto-docs rev: 62f45579970f47d22dabe921a51c663059a04576)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These classes have been removed. The bootimg class was sucked
into the image-live class. I removed the reference sections to
both classes and fixed the references throughout the manual set
as needed.
(From yocto-docs rev: 649d56b54987580039cbd52f54642112f810ffad)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Occurrences in many manuals and one figure.
(From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5517]
I added two package management system generic implementation
details to the section. This brings the section up to speed
as the definitive work on combining multiple versions of library
files into one image. We no longer have to refer the reader
to a separate wiki page.
(From yocto-docs rev: 450e718ca1b853f332c4e607a5a76efd689f7769)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered typo in the file... "naivte" instead of "native".
Fixed.
(From yocto-docs rev: baa9fb2b553db425c8a5cfca04d913963e24d0a0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of a DISTRO_NAME_NO_CAP variable, the occurrences
of the DISTRO_NAME variable had to be checked to see if they really
should be using the "NO_CAP" variable instead. Output and actual
branch names are case-sensitive.
(From yocto-docs rev: 711a3255538298dd3c4bd2af8ad13bc2d159c872)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5092]
Added a new subsection to the "Configuring the Kernel" section to
describe the part of the configuration audit phase that deals
with non-hardware and hardware options.
(From yocto-docs rev: 2545c3f2cf45ffcc9bf9f388d929c8242b74b011)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I commented out a large section that had to do with running
oprofile. Also, located and removed the link to that section
from the profile-manual.
(From yocto-docs rev: 63d6e754f994693c9a4d4b8211c6ef5f817c31f7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "meta-toolchain" is legacy now. I went through and removed
its use except for where it appears still as output from the
oe-init-build-env script.
(From yocto-docs rev: 1cc134060459278997d57f1293f54091c5404d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I applied some review comments for the changes made to several
areas in both these manuals. Minor wording fixes and the
dropping of some changes as directed by Joshua Lock.
(From yocto-docs rev: 71af89da612c37162ba27844c297879d643caf65)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I went through and made some judgement calls on the use of
"native" and "sdknative". I tried to make sure that the reader
understood the real meaning of these terms.
(From yocto-docs rev: d711e8c6dfb32a4ad79e9d11dbf44fbc759d0245)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8634]
To clear up the behavior the COPY_LIC_DIRS, COPY_LIC_MANIFEST,
and LICENSE_CREATE_PACKAGE variable behaviors, I updated the
glossary descriptions of the variables. Also, added more info
to the "Providing License Text" section in the dev-manual. Tied
everything together with good referencing.
(From yocto-docs rev: e7b2a1ed29dcd9d572b71f756e7705e6499a05ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8634]
I updated the "Providing License Text" section to include some
verbiage on the new CREATE_LICENSE_PACKAGE variable.
(From yocto-docs rev: db2155875dd741000e5f67253486580bba70584f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Notified that Anibal wanted this reverted from the commit
that changed it. This is due to the fact that we now use
the same name for the new recipe ptest-runner instead of
ptest-runner2 to maintain compatibility with old code.
Reported-by: Anibal Limon <anibal.limon@intel.linux.com>
(From yocto-docs rev: a1548ee35a797035247d8fdee6127560db9ead5d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Generate an Image Using an Existing Kickstart File"
section had a missing subject. Fixed it.
(From yocto-docs rev: 7ab6d1422690373e59d681e423a80595879788b4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8844]
Made some changes to reflect the requirement of certain options
when creating a partion such that the partition is automatically
mounted.
(From yocto-docs rev: 096f33b7b7a0360c1df345dd669bbe00723b1882)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed out "ptest-runner" with "ptest-runner2" and updated
wording from "script" to "program".
(From yocto-docs rev: 221d7c6125f5fc02b9ce7bcf177fb382f421ff9f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #8168]
I placed a couple notes in the "Configuration" and "Compilation"
sections within the "Writing a New Recipe" section. These notes
point out that the build system (as of release 1.7) now disables
several *-config scripts. The user should be using "pkg-config"
to ensure proper pathname construction and location of these
types of scripts.
(From yocto-docs rev: a46fd0f7b4d5da7bf3b218441ec5b9a6ef552266)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8298]
Updated several classes with feedback from Jose Lamego of Intel.
The feedback fixed some class groupings so that previously isolated
classes could be bundled under common classes (e.g.
autotools*.bbclass).
I scrubbed the cross-references for cases where a particular
class became "undocumented." The cross-references now point to
the bundled class entry in the ref-manual.
(From yocto-docs rev: 07a533cb41ad26d202f4e303f2dbc7d7bf26e076)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8412]
Forgot about CentOS. I have added that item in.
(From yocto-docs rev: f298ef74d7366ef01b9b1efcf5b0824a6e1aa742)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8412]
Added another bullet item that lists the required packages per
distributions needed to enable the runtime QEMU tests.
(From yocto-docs rev: f7e42f9b069e0fd3b419b571554669a89bc843e6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8375]
Applied some suggested simpler wording for this bulleted item
of information. Also, did some paragraph editing for better
organization.
(From yocto-docs rev: fd3e277b01ed6fd3580a1c008b1ac05bcfb98f38)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8256]
Applied some review comments to the multilib example. The
syntax was incorrect.
(From yocto-docs rev: 4e8abf17374535be3b168525ed2bec66fb1ce759)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7910]
Three occurrances of this typo were fixed.
(From yocto-docs rev: f538137c93d4b34c6d5836d9b21b687fb79ae182)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8256]
The suggested multilib example in the "Using Multilib" section
was broken. I replaced the lib32-connman library with the
lib32-glib-2.0 library.
(From yocto-docs rev: fa302dd1b7d71c880815fdc4b9a6764c095d476d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Configuring the Kernel" section did not address "defconfig"
files. In my opinion, this is a hole in the docs for this section.
I added a new section titled "Creating a defconfig File" that is a
sub-section of the "Configuring the Kernel" section.
Additionally, I added a brief sentence in the introductory paragraph
to include the fact that this new information exists.
Finally, I included the bitbake command that ensures that the
proper configuration steps are minimally run before a user attempts
to use bitbake to get into menuconfig.
Fixes [#YOCTO 7474]
(From yocto-docs rev: 13c0c7dddca59474ef65dacc12f0bfaa38933887)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7524]
The "Writing New Tests" section needed more clarification in the first
paragraph. One requirement is that minimally, an empty __iniit_.py
file must exist in the runtime directory.
(From yocto-docs rev: 519d0ff95e2ffbdb615d6dc27a6c11b393eb4b53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently the "‐" ENTITY used throughout the YP manual set to
get literal "-" characters in example commands renders into a unicode
that is not a dash. This results in users getting errors if they
attempt to cut-and-paste a sample command that uses a "-" character
from the manual into a shell. I have universally replaced all the
"‐" strings in the YP manual set to "-" strings.
(From yocto-docs rev: ef6dbf591eee70866f163e3c98454b6145f4fa3a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The send-error-report tool syntax has slightly changed since the
documentation was written. Removed the [server] part of the
command and added more detail on its use and results.
Reported-by: Michael Wood <michael.g.wood@intel.com>
(From yocto-docs rev: 10e28ab877b327301be536e5d515d5a419d082ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic is not using parted and other runtime dependencies from host
system anymore. It uses native tools instead. Removed host parted
from the list of requirements. Added instructions to build native
tools.
(From yocto-docs rev: ab22aff62bd9ffde3dfefe9fcabadc6e5aae7e31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton.
(From yocto-docs rev: 403c9ae5443eaf2a115e2224f07ee19f98c8139d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton reviewed the section.
(From yocto-docs rev: 82d9750b4349b3c54f73118ec7d65f0bb96e3f7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the "Customizing an Image Hostname" section from Ross.
Updated the last paragraph to not imply incorrect information.
Fixes [YOCTO #7417]
(From yocto-docs rev: 8997be297077ee0052a5afbe50b9864cdef14058)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7417]
New section to address how the user can change the devalt image
hostname written out to /etc/hostname.
(From yocto-docs rev: 4ac6bc05947e56106aafcc6f9aef93bd93293fba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently, copying HTML displayed commands that have a
double dash created through "‐‐" in the docbook source
causes some issues in the shell. I have scrubbed the manual set
to replace any "‐‐" strings with "--".
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e88b813b71d7d6d8acd8a8638f2db71265145b64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to be more accurate.
(From yocto-docs rev: 1acb7ce94a4f4b02cc50d1e098f04a77d9a53ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the last paragraph example as it is not a good example.
Unfortunately, there is not a good example so I replaced it with
a minor suggestive work-around at the end of the first paragraph.
Also, used some <replaceable></replaceable> formatting for the
first paragraph.
(From yocto-docs rev: 6c3989fd4fe41a6434d70208d59747060e62a366)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7256]
In the "Serial Console Connection" section there was a link to
TEST_POWERCONTROL_CMD when it should have been to the
TEST_SERIALCONTROL_CMD variable.
(From yocto-docs rev: 9ec64c86bd4171a017898daa332d2a98fea0358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for "tc" was described as "the called text context..."
rather than "the called test context...". Updated the description.
Fixes [YOCTO #7269]
(From yocto-docs rev: 0da4437c26225ce0302f10f7ba3c012f1f990c74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This start to the script is not really necessary and is in fact
the rare case. I have removed two occurrences of it in the
"Post-Installation Scripts" section where it was used in code
as the best form to create a script.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f7c1a1e135e8a9d76005bb6ae7b9cc2810f0af90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on "Handling a Package Name Alias" was confusing and
wrong. We decided to eliminate it. The section was removed from
the dev-manual. The corresponding variable DISTRO_PN_ALIAS
remains for now but without the cross-reference link to the
now missing section.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9938cdcc8488baffa4252288bf45243055e76fed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed out the occurrences of eglibc and replaced them with
glibc.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 868ceda79b1c738349e512e523c850b24f9232ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was out of date. Updated accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b95535fca149abbbe4fee7e74ebc13d2bb376c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some text to indicate that you should put patch files
in $BP, $BPN, or "files." Also, added more on how the patch
files suffix is (i.e. accounting for compressed suffix names
like diff.bz).
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d9e23da24e9d86ec5e2b9d4067667478f3e56ba1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch files can end with compressed suffixes such as
diff.gz and patch.bz2.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 69993710d1466dddc804c33c1d76f46d0982d28f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Fetching Code" section, some loose description of how the
build system reacts to the two checksums in a recipe existed.
Robert asked some questions about how the behavior would be if
just a single, correct checksum existed and if the two existed but
only one proved correct. Turns out, if you supply a single one then
the build will not throw an error or warning. If you supply two
but one is incorrect, then the build will throw an error or
warning. I updated the text to be technically correct without
going into huge details.
(From yocto-docs rev: f49a744821d9326314803d5003158bd402e74e0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to the original patch. These edits were caught by
Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b50a2e44eccd50166351611f17c643cbbc60f8b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was modified to fit in with the style of the book.
(From yocto-docs rev: 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bob Cochran pointed out that the skeleton recipe shown in the
example is not really what is created by newbb.vim. I updated the
example to match.
(From yocto-docs rev: 2dfa712522aec5204b9e739b6060109090280011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was a bit confusing on the use of "_prepend" as associated
with the FILESEXTRAPATHS statement. Especially in the final note
where it indicated you don't need "_prepend" if your append file
is not adding any new files. I updated the note to be more specific.
Another small change I made was to replace the Crown Bay BSP referenced
in the section with the Emenlow BSP, which has a longer life span than
CB.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 35bdc8031bc4ecf1ea321b0cafade97eeaa56513)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Customizing Images Using Custom IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES" needed a bit more clarification on
the image features. The text pretty much passed off image
features as all mapping into package groups, which is not true.
Some, like "debug-tweaks for example, are more like general
configurations. I updated the section accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 7dd55ff0bd6f7923e22695ed7323df5cfe17d1d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was pointing to a poor example in meta. I substituted
in a better example and rewrote the section to flow better around
that example and the final fabricated one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7f07a2993d5c1b8e0c8b7da0e9d4c28242a5e26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
Per Martin Jansa, added some information in the bullet item that
talks about the tools and the cases that can cause issues when
tuning things by machine or architecture.
(From yocto-docs rev: e8e47828df65abdc18bbd681c47719a7df77b00f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
I applied some review edits to this section as suggested by
Richard Purdie.
(From yocto-docs rev: a1898cf65537e732e0e42605bb28d636077e7f56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
This is the first draft of a new section on multi-machine builds.
(From yocto-docs rev: a47fd17295d943bff482a0747f3b2e69831aa985)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section to account for some new variables and
several more ways to run tests against expanded targets. Also
added power control section.
(From yocto-docs rev: a0f08466c00ae51a99d790fa6c9dccef2e0f1518)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Yi Zhao
Anibal Limon
Ed Bartosh
Uwe Kleine-Konig
Scott Rifenbark
Michael Wood
Claudius Heine
Robert P. J. Day
Pascal Bach