After change to the rpm4, the rpm packages in lsbtest, such as:
lsb-setup-4.1.0-1.noarch.rpm
lsb-dist-checker-5.0.0.1-1.x86_64.rpm
......
lsb-cmdchk-5.0.3-1.x86_64.rpm
When install above rpm packages, the error log appears:
package lsb-setup-4.1.0-1.noarch is intended for a different operating system
......
So we should add option "--ignoreos" to the rpm install command in LSB_Test.sh
in ./meta/recipes-extended/lsb/lsbtest directory. In this way we can make sure
the correct installation of those rpm packages.
The YOCTO bug #11224 didn't create logs, this is because the above test rpm
packages didn't install.
[YOCTO #11224]
(From OE-Core rev: db2798d967dbffed834070b52fe778efa18cb4ae)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were two remaining cases that could end up creating /lib64
rather than ${base_prefix}/lib64. The difference matters when building
with usrmerge.
(From OE-Core rev: b791f13286c8c58ce1f3fa3745ffdd5bd5ff1d02)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use ${D}${var} rather than ${D}/${var} for variables where ${var}
contains an absolute path.
(From OE-Core rev: 2799eda9f373b430ad64c8b61f8047abce7f1e22)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using of bitbake environment variables in-place of hardcoded strings makes this
recipe portable to all environments.
(From OE-Core rev: 61135e4134b7e0b42b57a87a9a30c32002cb1067)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox implementation only supports head -1 option if ENABLE_INCLUDE_SUSv2
or ENABLE_FEATURE_FANCY_HEAD configuration options are enabled. Also the -and
option for find is only supported if ENABLE_DESKTOP configuration option is
enabled. These configuration options are not enabled in several builds, which is
why this patch is needed.
[YOCTO #11041]
(From OE-Core rev: 9b036ac92073cadd26819def37ac0199f1ec9934)
Signed-off-by: Athanasios Oikonomou <athoik@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade lsbinitscripts from 9.64 to 9.68.
(From OE-Core rev: d3f6df98318f0751948041a129faed1bd0f7a7c6)
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to the LSB 5.0 Release Notes, FHS Released, Qt3 removed
and evoloved its module strategy which you can access from the
site:
https://wiki.linuxfoundation.org/en/ReleaseNotes50
So we make two changes to comply with the LSB 5.0:
1. Remove the lsb-test-qt3-azov-*.rpm test package and delete the
test session.
2. Update the test packages.
(From OE-Core rev: 89771f2dfc58b83a457147f8498214d7a2bfae43)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit e1a3c6e218779e2237c494e58209c06b871c47c4.
util-linux upstream, busybox, and sysvinit all install mountpoint by
default to /bin. Arch Linux, Debian, and Ubuntu (at least) all appear to
install mountpount to /bin. AFAIK only Fedora and possibly other Red Hat
derived distributions install it to /usr/bin.
(From OE-Core rev: 497f9720a7bdc97ae147f3c6e351fba29029a7dd)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Reviewed-by: Ken Sharp <ken.sharp@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
lsb-4.1: lsb: Files/directories were installed but not shipped in any package:
/lib32
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
lsb: 1 installed and not shipped files. [installed-vs-shipped]
(From OE-Core rev: 614398f106089f1aae58870286f50717ac03c662)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building a base image such as core-image-minimal with lsb and then
attempting to source /lib/lsb/init-functions, then using the start
_daemon function (to start a daemon, such as syslogd) fails, since
/lib/lsb/init-functions use functions (incl. "daemon()") from file
/etc/init.d/functions.lsbinitscripts, which is provided by package
lsbinitscripts.
Running daemon() then calls /usr/bin/mountpoint, which is provided
by util-linux.
So, lsbinitscripts has been added as an RDEPENDency in lsb, and in
turn util-linux has been added to lsbinitscripts.
[YOCTO #7732]
(From OE-Core rev: 4b1d302c60f07a39f1276a94d8c9bb34134186a3)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sync file packages_list with upstream test suite packages version.
(From OE-Core rev: ef75245ab5d4a668c6242d4fddaec20b5fa107ec)
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If 'rc.debug' is not in kernel parameters, the functions script would
exit 1 which causes other init scripts that source it exit 1. This is
not what we want.
[YOCTO #7948]
(From OE-Core rev: 080a7fbd876274410107732f175037fcea4d53ca)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some lsb packages depend on correct lsb-core-ARCH package being
installed (or rather provided) on the target file system. Provide this
package name by main lsb package.
(From OE-Core rev: 981109b7388dcd0de9fd2e9cdfe2a920b9f8facb)
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init-functions had been installed to /lib/lsb/init-functions
according to lsb spec, then there is an installed-vs-shipped issue when
build with multilib:
ERROR: QA Issue: lsb: Files/directories were installed but not shipped
/lib
/lib/lsb
/lib/lsb/init-functions [installed-vs-shipped]
Fix the issue and indent.
(From OE-Core rev: d1fc46a2b034a9dbe58d01920ad3ef4ad5131029)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to LSB specification Ref1, LSB checks file
/lib/lsb/init-functions. But for 64 bits system it is installed in
/lib64. Install init-functions to /lib/lsb to conform with LSB
specification.
Link file /usr/lib/sendmail which points to /usr/sbin/sendmail is
required by LSB according to Linux FHS[Ref 2]. But it should be done by
packages which provides command sendmail such as msmtp, postfix and
esmtp etc.
Refs:
1 http://refspecs.linuxfoundation.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptfunc.html
2 http://www.pathname.com/fhs/pub/fhs-2.3.html#SPECIFICOPTIONS13
(From OE-Core rev: e1b837ab1e1d48b73217c4f62a0f5aefc998d8bf)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sysroot/${libdir}/sendmail conflicts with esmtp's, and it's a
symlink to ${sbindir}/sendmail which is meaningless for sysroot, so
remove it.
(From OE-Core rev: 9e906f4260d9ce44a78cc315930677b3bd0ab9c1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsb currently depends on util-linux solely for getopt, but that has now
been broken out into util-linux-getopt. Update RDEPENDS accordingly.
(From OE-Core rev: a9a588ec3dcb62f5b61c64371b19ebd3ac9bc80c)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Acked-by: Ken Sharp <ken.sharp@ni.com>
Acked-by: Ben Shelton <ben.shelton@ni.com
Acked-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have quite a number of Makefiles out there without a
clean target. Rather than have all cases code an empty do_configure, add
a CLEANBROKEN variable which when set to "1" will disable the attempt to
"make clean".
This patch also adjusts various recipes which either have this problem
fixed, or have been reported to have make clean failures.
(From OE-Core rev: 45b7d3add14eafc25da62bab68d4ae133f8dcb57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So use /bin/sh
(From OE-Core rev: 895ff60e5029e1b7f2f2c8b9a01eed900fe1fe00)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB lsb_log_message calls a begin()
function that should be implemented
in /etc/init.d/functions.
The aforementioned script does not
implement the begin() function, as
such there is a small issue related to logging.
This fix implements a local version of
the function, while cleaning up the
troublesome previous implementation.
Fix [YOCTO #5795]
(From OE-Core rev: 365ab9118b6c68aedb2e79129202b385329a8abb)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
== is a bashism use = instead.
(From OE-Core rev: c90d1047c41148cbd57f26b5a34563346602a71b)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB supports to test on PPC64 target, so update lsbtest recipe and test
scripts to enable PPC64 support.
(From OE-Core rev: 59905859064d4c7a09e04115daa4a93939a6dafc)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add missing localedef statements to the LSB_Test.sh which are required
by the libstdc++ LSB test.
(From OE-Core rev: 827fc325f0462b93f360b31ac27ef15491034da3)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB_Test.sh run ldconfig to update library cache. If command ldconfig
doesn't exists, test will fail.
Check whether ldconfig exists. If not, don't update library cache.
(From OE-Core rev: e3e5ebd6d05263bd7878537df93e9f1572f1172a)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When enable multilib for x86_64, lsb rpm packages for archs x86_64 and
i486 will be installed. But i486 target packages fail to be installed
that no such pattern in rpm platform file. Update platform file to
enable install i486 rpm packages as well.
(From OE-Core rev: 02d3233b57cda03dfef08983c7f9a03285444c83)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
De-bash some script in lsb to make it not dependent on bash.
[YOCTO #5555]
(From OE-Core rev: 5ba55f9936d1f036518a1722f9c1e551477e167c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some init scripts call a "begin" action to log early init phase
messages, e.g. openvswitch-controller. Add the "begin" function to
lsb_log_message.
(From OE-Core rev: c956290902afd0e4f6d8f545dfe0a55796deec5e)
Signed-off-by: Paul Barrette <paul.barrette@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The install_initd and remove_initd are linked to /sbin/chkconfig for lsb
core test, but chkconfig has been moved from /sbin to /usr/sbin in order
to fix QA warning about unsafe references in binaries.
(In commit e486242db8)
Let install_initd and remove_initd link to /usr/sbin/chkconfig could fix
this issue.
[YOCTO #5152]
(From OE-Core rev: 789c4c13c5095a2865d1ee1b242141b5b076bed5)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In normal cases when a HTTP server fails to deliver a file, it returns
an HTML document to describe the reason (e.g. 404 Not Found). The curl
will output this page as a file and do not return error. Add a "-f"
option will prevent curl from outputting that and return error.
[YOCTO #4895]
(From OE-Core rev: d53c9e6942a65f2ae5eb8f33012453c356fd6ff4)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't need to set x permission for this file
(From OE-Core rev: 8c6864f4884387306efff8c513efff1ccb0e2027)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update file packages_list after sync test suite packages version with
upstream.
Check date: Jun 25, 2013
(From OE-Core rev: 8695a11c927e9ee130b8c9ddf6441f3cb7164fc2)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky distro codename info added to /etc/lsb-release file.
lsb_release script will not complain anymore about
the incompleteness of /etc/lsb-release file by
returning an error code.
Increases LSB compliance.
Partial fix for [YOCTO #4071].
(From OE-Core rev: ddd43fcdb8af7d5b1a64d2c6cbd72a3896869321)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dengke Du
Peter Kjellerstedt
Amarnath Valluri
Athanasios Oikonomou
Wang Xin
Richard Tollerton
Alexander Kanavin
Robert Yang
Alex Franco
Jussi Kukkonen
Lucian Musat
Chen Qi
Andre McCurdy
Saul Wold
Dmitry Eremin-Solenikov
Kai Kang
Jackie Huang
Richard Purdie
Cristian Iorga
Stefan Stanacar
Paul Eggleton
Paul Barrette
Hongxu Jia
Yi Zhao