When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
[YOCTO: #9120]
(From OE-Core rev: 1d4c120edeb6e45665eafd6962a10ebb89d758eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day reported that configuration fragments and kernel
features were not being found when organized in a particular manner:
linux
- $BOARD
- mm.patch
- mm.scc
- ssd_sil.cfg
- ssd_sil.patch
- ssd_sil.scc
- uio.cfg
.. etc
There was a bug in the tools that did not handle the mix of subdirs
properly and ended up leaving a trailing / on the elements *not* in
the $BOARD subdir. As a result, the configuration fragments were not
properly found when searching the include paths, and a configuration
failure was triggered (due to missing files).
This change tweaks the tools to always check a path with and without
a trailing / when processing config fragments so they can be later
found when processing the configuration of the kernel.
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
(From OE-Core rev: 92ba77bea59a33b0ddbd5db36e2a1b42e8fd7190)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
backporting a mainline commit to address splats that have been
seen on the 4.4 kernel:
(From OE-Core rev: 52550828662cc430fe4c5273d44c4b818aa21150)
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit to have a more informative error
message:
uvesafb: print error message when task timeout occurs
The driver waits for response from user space for a pending
task until a timeout (UVESAFB_TIMEOUT) occurs. But the
existing error message in later steps is a little obscure.
This patch throws out an error message when timeout happens.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
(From OE-Core rev: 1c6ba3c57eae77adb9ae5c0a60e3a9174ef398b6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit a19cfee10c1f1762da601125c17035cf7701ce91
Author: Christopher Clark <christopher.clark6@baesystems.com>
Date: Thu Apr 14 17:00:20 2016 -0700
linux-firmware: break out bnx2 mips firmware and WHENCE license
Break out the bnx2 mips firmware into an independent subpackage.
Since the bnx2 firmware license is contained in the common WHENCE file
also package that separately so that other firmware that is licensed
within that file may depend upon a standalone package containing it.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
(From OE-Core rev: a73a316429b256061a7aa48bcf29c5f96df68a8c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When bootstrap calls autoreconf, it won't have AC_LOCAL set properly
so shared scripts may not be found: glib-2.0.m4 in this case.
Remove custom bootstrap code so autotools class handles this.
(From OE-Core rev: b561a85db7b5e93308d7da175cd9fff882d94a9f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of passing DESTDIR just in the make install invocation, pass it in
EXTRA_OEMAKE. This appears to stop perf from rebuilding at instal time for me,
which appears to be the trigger for the random build failure.
[ YOCTO #9182 ]
(From OE-Core rev: 76c473dbe9e6a1eb8bca89f26cf29b41ca18d680)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An always on configuration of aufs4 crept into the default kernel
configuration blocks.
With this change, aufs-enable.scc can be used to turn on aufs via
a KERNEL_FEATURES entry. We can now have co-existing unionfs solutions
and can update them without breaking builds that haven't opted-in.
(From OE-Core rev: 5d3d6224ec2abbbeb5b9a292d208040b89cc4b98)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following two commits:
ab0d998117cc ktypes/tiny/tiny.cfg: support /proc/sys
349e9ce59f7b features: enable pinctrl driver for Broxton
(From OE-Core rev: 2f719dc523439a73dd203e6f922a7b3ccaddbee1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gpio_drive_show/store use incorrect gpio_desc,
this causes the drive sysfs property cannot be used,
This patch fixes this issue
Upstream-status: Inappropriate, custom code for legacy userspace
(From OE-Core rev: ec13eb0b19ee1d433329af0dd88ac5b31b13c1af)
Signed-off-by: Yong Li <yong.b.li@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: After meta data application, the kernel tree branch is standard/tiny/common-pc. The
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: SRC_URI specified branch standard/tiny/base. The branch will be forced to standard/tiny/base,
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: The meta data and branch standard/tiny/base should be inspected to ensure the proper
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: kernel is being built.
Use standard/tiny/common-pc which is pointed by the .scc to fix problem.
Btw, standard/tiny/base and standard/tiny/common-pc points to the same
commit id.
(From OE-Core rev: 04556b33d5bf232ed4de14725cf94627f434131e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It only works with qemux86, but mismatched qemux86-64 which caused
runtime errros. (kernel is bigger, can't boot, no output, and so on).
Add '$' in the end to fix the problem.
(From OE-Core rev: 8069399d9fd29428b8f3d3db419b81913b57f997)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit:
[
Add support for Intel R200 depth camera in uvc driver.
This includes adding new uvc GUIDs for the new pixel formats,
adding new V4L pixel format definition to user api headers,
and updating the uvc driver GUID-to-4cc tables with the new formats.
Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com>
Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
(From OE-Core rev: 967009e91472db109bb94c8f865924fef1beaa22)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline destined commits to fix PAT issues with
32bit x86 and qemu:
bc22b90fb583 x86/pat: Document the PAT initialization sequence
c534b1ec1991 x86/xen, pat: Remove PAT table init code from Xen
cd47692e804f x86/mtrr: Fix PAT init handling when MTRR is disabled
039434bdc165 x86/mtrr: Fix Xorg crashes in Qemu sessions
c08196e8064c x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
6928fce8c766 x86/mm/pat: Add pat_disable() interface
3163c8d5468d x86/mm/pat: Add support of non-default PAT MSR setting
With this change applied, we once again have working graphics and no special
work arounds.
(From OE-Core rev: 11cf8cb05975dda23370b7715872bc4a191a2ff6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
enabling AHCI runtime PM support via the following commits:
f5b08e95bc03 ahci: Add runtime PM support for the host controller
e05e05973f39 ahci: Add functions to manage runtime PM of AHCI ports
558571930e2d ahci: Convert driver to use modern PM hooks
4a2c2074f209 ahci: Cache host controller version
21641413456c scsi: Drop runtime PM usage count after host is added
254ab69f652d scsi: Set request queue runtime PM status back to active on resume
61c02cb167ed block: Add blk_set_runtime_active()
7bcfbac98f3c ahci: Store irq number in struct ahci_host_priv
a5a093b7f6e4 ahci: Move interrupt enablement code to a separate function
(From OE-Core rev: 83a7fca3f07487cdb367c63ede177f059ff1a021)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting two previous gpio commits to allow the application of proper
upstream ready patches to add this support:
08943f2bbd50 gpio-pca953x: add "drive" property
a517d5b72e76 gpio: pca953x: provide GPIO base based on _UID
c91063f44368 gpio-pca953x: add PCAL9535 interrupt support
58f3c9f0ac6d Revert "gpio-pca953x: add "drive" property"
7abbd5fec15d Revert "gpio: pca953x: provide GPIO base based on _UID"
(From OE-Core rev: 053bffb7f1af4b295a59859dea07a74009c134a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To let overlayfs be used like aufs, we create a feature
fragment. Configurations that want this union FS type, can
enable it via KERNEL_FEATURES.
(From OE-Core rev: b5600da9cdbf9a5e3badd990f399591e48b09eae)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[
NUC6 (Skylake) graphics firmware fails to load without this patch.
From: Mat Martineau <mathew.j.martineau@linux.intel.com>
commit a41c8882592fb80458959b10e37632ce030b68ca upstream.
The driver does not load firmware for unknown steppings, so these new
steppings must be added to the list.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454023163-25469-1-git-send-email-mathew.j.martineau@linux.intel.com
]
(From OE-Core rev: 754350eb937c38e1cbd2dd3de26cc93d61d01328)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline changes:
afaf425e796c pwm: Add the pwm_is_enabled() helper
023721c3d067 pwm: atmel: Fix incorrect CDTY value after disabling
cd9fe8adb313 pwm: atmel: Fix incorrect CDTY value after enabling
3f445ca6df1f pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
9a51f622bdc9 pwm: lpss: Select core part automatically
8ee11b6f80ba pwm: lpss: Update PWM setting for Broxton
148228a52c2d pwm: lpss: Remove ->free() callback
e20d95bcd0b3 pwm: lpss: Add support for runtime PM
b2248acf6f8b pwm: lpss: Add more Intel Broxton IDs
85e8566bd241 pwm: lpss: Support all four PWMs on Intel Broxton
1bcdcb6275bf pwm: lpss: Add support for multiple PWMs
(From OE-Core rev: e721858657b8641fda94f84866c37668580bd7a9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following commits:
2b0cc0f0ca23 mmc: It is not an error for the card to be removed while suspended
67903c1f4c77 mmc: sdhci: 64-bit DMA actually has 4-byte alignment
4e434f483381 mmc: sdhci: Do not BUG on invalid vdd
05be442eb234 mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
97a5f396dca6 mmc: core: Make runtime resume default behavior for MMC/SD
b6ee1ac07f14 mmc: mmc: Improve reliability of mmc_select_hs400()
45de48ce0b3c mmc: mmc: Move mmc_switch_status()
9d6aaaa0f6b7 mmc: mmc: Fix HS setting in mmc_select_hs400()
d7795de930c5 mmc: mmc: Improve reliability of mmc_select_hs200()
ac98e33a088d mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers
87f52cce8123 mmc: sdhci-pci: Add more PCI IDs for Intel controllers
cf3a4d2d4c7d mmc: sdhci-pci: Add another PCI ID for an Intel eMMC host controller
b3ef45585504 mmc: sdhci-pci: Build o2micro support in the same module
b32a4e71f49d mmc: sdhci: enable tuning for DDR50
f8e213bee1e1 mmc: sdhci: call sdhci_init() before request irq
ece0925eb94e mmc: sdhci-pci: Enable HS400 for some Intel host controllers
1c01bcdceaf6 mmc: sdhci-pci: Add support for drive strength selection for SPT
c1d6e92915a9 mmc: sdhci: Add a callback to select drive strength
40deb3ac3331 mmc: mmc: Add driver strength selection
e7d602f5992f mmc: mmc: Read card's valid driver strength mask
bc193a886571 mmc: core: Record card drive strength
a548d3993cc8 mmc: core: Factor out common code in drive strength selection
6713f5cf3164 mmc: core: Add 'card' to drive strength selection callback
852e6bd69b77 mmc: core: Simplify card drive strength mask
0bb40266bbb9 mmc: core: Allow card drive strength to be different to host
940d30f1a212 mmc: core: Reset driver type to default
efbc6ba8cd27 mmc: cast u8 to unsigned long long to avoid unexpected error
bafe0e5beba9 mmc: core: Don't print reset warning if reset is not supported
5b2789151852 mmc: block: Retry errored data requests when re-tuning is needed
d14211a4b2fe mmc: block: Check re-tuning in the recovery path
1ff15c648159 mmc: core: Flag re-tuning is needed on CRC errors
12544ee1cdbb mmc: sdhci: Change to new way of doing re-tuning
995073b182f7 mmc: core: Add support for HS400 re-tuning
53a0d731e824 mmc: core: Separate out the mmc_switch status check so it can be re-used
d3f59f108bf7 mmc: mmc: Hold re-tuning in mmc_sleep()
465db9504a27 mmc: core: Hold re-tuning while bkops ongoing
60cacf85ee10 mmc: core: Hold re-tuning during erase commands
5bd43535f4c1 mmc: core: Hold re-tuning during switch commands
4baa45ff8d15 mmc: core: Add support for re-tuning before each request
cd2ca27f9282 mmc: core: Enable / disable re-tuning
65723236b746 mmc: host: Add facility to support re-tuning
(From OE-Core rev: 934fd9d7310ffc72e206f48590a0f10ba0a78e1b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable Apollo Lake/Broxton, we backport the following changes:
da451824f75f i2c: designware: Convert to use unified device property API
58b1b5365f4a i2c: designware: Do not require clock when SSCN and FFCN are provided
8995091cfa0f i2c: designware: retry transfer on transient failure
1fc62907f84e i2c: designware: Move common probe code into i2c_dw_probe()
678110c0f2b8 i2c: designware: Rename platform driver probe and PM functions
c51c2e104d40 i2c: designware: Make dw_readl() and dw_writel() static
98d2b6e244ad i2c: designware: Remove unused functions
3d04c6e99652 i2c: designware: Disable interrupts before requesting PCI device interrupt
fb5b7be0fbe7 i2c: designware: Remove interrupt clearing from i2c_dw_pci_probe()
d48fd08b11c8 i2c: designware: Make debug print in i2c_dw_isr() shorter
28f94bc07450 i2c: designware-pci: use IRQF_COND_SUSPEND flag 95f494846fc1 i2c: designware: Avoid unnecessary resuming during system suspend
fb2ae3705a3a i2c: dw: Add APM X-Gene ACPI I2C device support
516a0fc91e00 i2c: designware: Add support for AMD Seattle I2C
874d63b3c95c i2c: designware: fix IO timeout issue for AMD controller
47543e80c6dd i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"
076fe383c4b5 i2c: designware: use to_pci_dev()
(From OE-Core rev: 7b4b8a2481ce256e35fb86ebdeb944ee29ad5231)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following 4.4 backports:
630b726098c9 mfd: make mfd_remove_devices() iterate in reverse order
aab24907568b driver core: Do not overwrite secondary fwnode with NULL if it is set
89775462ef50 device property: return -EINVAL when property isn't found in ACPI
a9eebae4a2c0 device property: check fwnode type in to_of_node()
(From OE-Core rev: 4dd3bd968042d943f279d91d220abc61ebd574a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was requested that CONFIG_COMPAT be enabled for qemuarm64 so that
32bit applications could be tested. This is simple enough to do, so
there is now a 32bit compat feature, and it is included only in
qemuarm64 to avoid impacting any other ARM targets (but the feature
is available for others to use).
[YOCTO #8646]
(From OE-Core rev: 26488894a2fdea0e0b003ff060b5a88ec6625a5f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The scripts that are part of perf require python and supporting modules.
The existing perf-pyton dependency only brought in core python, which
left us unable to actually execute the scripts on target.
With this additional runtime dependency, we can now execte the sample
analysis scripts when perf-scripting is availble.
This is a partial fix for [YOCTO #9069], since there are still scripts
looking for non-existent modules, and those will be dealt with in
future releases.
(From OE-Core rev: 1aa2d2a5e91fddb80c792d6c2ff5fd2e80c751eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two QA warnings were being generated from perf, due to the location of
python scripts changing in the kernel build:
WARNING: perf-1.0-r9 do_package_qa: QA Issue:
/usr/libexec/perf-core/scripts/python/call-graph-from-postgresql.py contained
in package perf-python requires /usr/bin/python2, but no providers found in RDEPENDS_perf-python? [file-rdeps]
WARNING: QA Issue: /usr/libexec/perf-core/tests/attr.py_perf contained in package
perf requires /usr/bin/python, but no providers found in its RDEPENDS [file-rdeps]
By adding libexec dir to both the tests and scripts packaging, we get the
appropriate RDEPENDS on the packages that actually contain the python scripts
(without making perf-core depend on python).
We also tweak any python scripts to use '/usr/bin/env python', rather than a
version specific python, since it won't be provided and generate a QA error.
[YOCTO #8991]
(From OE-Core rev: d7888b6d7fd1a1930013f3d4e31a2522038cdc62)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline commits for Apollo Lake/Broxton support:
568c4910b938 device property: always check for fwnode type
bd2ac1821e91 device property: fallback to pset when gettng one string
44a76bd61eed ACPI / property: Extend fwnode_property_* to data-only subnodes
76f301877fab ACPI / property: Add support for data-only subnodes
95010db1e8f9 ACPI / property: Add routine for extraction of _DSD properties
3d257abeae4d device property: Return -ENXIO if there is no suitable FW interface
15f7db3cd1d0 device property: attach 'else if' to the proper 'if'
effb3f07966e ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()
30aa0ae9ebf0 ACPI / scan: Parse _CCA and setup device coherency
c8b4218d1523 ACPI / property: Define a symbol for PRP0001
3d20c5d27e99 ACPI / property: Refine consistency check for PRP0001
f753cbe35057 device property: avoid allocations of 0 length
6985a3d56431 device property: the secondary fwnode needs to depend on the primary
6c23f8de37ff device property: add spaces to PROPERTY_ENTRY_STRING macro
216b251c170c include/linux/property.h: fix build issues with gcc-4.4.4
c579da0b4812 device property: Take a copy of the property set
e0c7ce6ec1eb device property: Fallback to secondary fwnode if primary misses the property
a657577af2af device property: improve readability of macros
599f18f62daf device property: Add fwnode_property_match_string()
03599b274370 device property: helper macros for property entry creation
5247e6af02d6 device property: keep single value inplace
c12af01cf0d4 device property: refactor built-in properties support
1390c21efa11 device property: rename helper functions
(From OE-Core rev: cd4288126b01903fe69714eda772cd4f725ad43a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enables the CONFIG_TMPFS_POSIX_ACL, which is wanted by things like
systemd. We also explicitly enable the features's dependencies and
options selected by the feature for clarity.
[YOCTO #9269]
(From OE-Core rev: 1f501a8f6e7b7f2d79bf2a18a8b83f413eb5cc19)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This breaks out new firmware from the iwlwifi firmware along with the i915 graphics firmware.
(From OE-Core rev: 3c695c1db7efb0a4cef3f31cb3c4b5e96ed23363)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This re-orders the licenses to be alpha by Firmware-* license name, not by LICEN*E name.
This adds licneses that had not been in the list before.
Firmware-adsp_sst
Firmware-amdgpu
Firmware-atmel
Firmware-cavium
Firmware-e100
Firmware-hfi1_firmware
Firmware-i915
Firmware-kaweth
Firmware-moxa
Firmware-nvidia
Firmware-qla1280
Firmware-ti-keystone
(From OE-Core rev: 87a89d4e2d6b9a869bb06859e855b3688d3ba7ba)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are newer blobs that are not include since we currently package
blobs independtly, this will ensure that future updates are correctly
added to the packages.
(From OE-Core rev: 23372863b511ac07ba8ee33e3677073b1c7e2417)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lttng-modules are compatible with nios2, so just amend
the compatibility string.
(From OE-Core rev: e219a977a8243c858028c36c41b17fad12413290)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We backported a series of usb OTG commits for BSPs that required
updated support, but this commit was missed. We backport it as
well to fix build issues in some configurations.
(From OE-Core rev: 06ab1c7f60fbc0a9aebb9fd9321a1b7213378037)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
backporting the following powercap commits:
24e2e14aa446 powercap / RAPL: Enable Broxton RAPL support
6be05b47d625 powercap / RAPL: Add support for Skylake H/S
879e8d02e07d powercap / RAPL: Support Knights Landing
ec583656ad93 powercap / RAPL: Floor frequency setting in Atom SoC
(From OE-Core rev: 0c976d90781a1668c5f893d8c7f2509732679466)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing a series of mainline backports to support USB on a couple of
Intel platforms:
b5f6aa9957dd usb: otg: add usb_otg_caps structure for otg capabilities
bbce8fe2cc42 usb: dwc3: pci: add support for Intel Broxton SOC
e734e1d9f827 usb: dwc3: pci: Set enblslpm quirk for Synopsys platforms
1c6bb6694d50 usb: dwc3: Add dis_enblslpm_quirk
1c6be99e56b8 usb: dwc3: pci: trivial: Formatting
2f2b89764b97 usb: dwc3: pci: passing forward the ACPI companion
ea4b3c72d976 usb: dwc3: core: convert to unified device property interface
dc670b52c69a usb: common: of_usb_get_dr_mode to usb_get_dr_mode
586fc5174649 usb: dwc3: st: prepare the driver for generic usb_get_dr_mode function
0624bd9af7ef usb: common: of_usb_get_maximum_speed to usb_get_maximum_speed
e65bc5467e07 usb: dwc3: Add frame length adjustment quirk
a90954c5d267 usb: musb: dsps: control musb speed based on dts setting
b48ff160a993 usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS
d1c59752195e usb: chipidea: set usb otg capabilities
733eada2cdec usb: common: add API to update usb otg capabilities by device tree
7ab2108dd82b usb: dwc3: core: avoid NULL pointer dereference
1aedb48b7dc9 usb: dwc3: add ULPI interface support
07e42a29fb7e usb: dwc3: pci: add quirk for Baytrails
065917252622 usb: dwc3: add hsphy_interface property
b2bb32a363a3 usb: dwc3: setup phys earlier
bf6bb0a6ebb5 usb: dwc3: soft reset to it's own function
d481da949476 usb: dwc3: cache hwparams earlier
9ac66262a201 usb: dwc3: store driver data earlier
5f940588938c usb: dwc3: ULPI or UTMI+ select
04fdce097f83 usb: dwc3: USB2 PHY register access bits
b7209213cc05 usb: add bus type for USB ULPI
(From OE-Core rev: 46d173949675dde10b714f30b6f9c37c2e26a43a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit for the 4.4 kernel:
[
gpio-pca953x: add "drive" property
Galileo gen 2 has support for setting GPIO modes. Expose these
properties through the GPIO sysfs interface. This approach is
bit hacky, since it changes the interface semantics.
The original patch was by Josef Ahmad <josef.ahmad@linux.intel.com>
and made on top of kernel 3.8.
]
(From OE-Core rev: 7256e5a9dba0652fe8361f3143771cb6371568b5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following patches for improved galileo support:
66009f8977a6 adc1x8s102: support ACPI-based enumeration.
903003b78c13 staging:iio: add support for ADC1x8s102.
cd83f4095b23 spi-pxa2xx: fixed ACPI-based enumeration of SPI devices.
c4efe23b7f93 pca9685: PCA9685 PWM and GPIO multi-function device.
81e166ec0a35 gpio: pca953x: provide GPIO base based on _UID
4086f8c34956 acpi: added a custom DSDT file.
(From OE-Core rev: 4533598f760e9841789db0e0eb4b14572c4224fe)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent split/factoring between production and development
kernel configurations, EXPERT, EMBEDDED and DEBUG_KERNEL are no longer
selected for all kernel types. This means that ftrace is no longer
selected by default in in standard BSPs, causing breakage in things
that relied on it.
(From OE-Core rev: e609c4edb211c576af35b7ac0c190dc9a7673483)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit for improved iwlwifi support:
iwlwifi: mvm: don't allow sched scans without matches to be started
commit 5e56276e7555b34550d51459a801ff75eca8b907 upstream.
The firmware can perform a scheduled scan with not matchsets passed,
but it can't send notification that results were found. Since the
userspace then cannot know when we got new results and the firmware
wouldn't trigger a wake in case we are sleeping, it's better not to
allow scans without matchsets.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=110831
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wu Zheng <wu.zheng@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 5ca402e612cf124e9c0cae684d5213d4c5db24b8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the folliwing patch series from Cal:
This patch series refactors the ktypes so that base and standard ktypes
do not enable EMBEDDED, EXPERT, or DEBUG_KERNEL. The reason this
decision was made is because production platforms likely do not want
DEBUG_KERNEL enabled, and EMBEDDED selects EXPERT which selects
DEBUG_KERNEL.
A new ktype called "developer" was also created. This ktype
enables the options now missing from standard and base, making it easy
to maintain the functionality of a BSP through simply swapping the ktype
from standard to developer. The preempt-rt ktype is now based off of
developer in order to maintain its functionality.
The new standard ktype does not include EMBEDDED, EXPERT, or
DEBUG_KERNEL. Without DEBUG_KERNEL it loses a number of debug features
that are selected by default. Without EXPERT it gains RFKILL_INPUT and
DEBUG_MEMORY_INIT, while losing VMSPLIT_3G. These are only available to
configure with CONFIG_EXPERT=y and default to EXPERT or !EXPERT. Not
selecting EMBEDDED has no apparent impacts.
Some coordination is required for this change, as existing BSPs WILL be
affected, and will either need to accept the changes in the standard
ktype or move to the developer ktype.
California Sullivan (12):
features/debug: add debug-kernel feature
ktypes: add developer ktype
ktypes/base: Disable EMBEDDED and DEBUG_KERNEL
CONFIG_PROCESSOR_SELECT: do not enable
intel-common-drivers.scc: move profiling and latencytop to a new file
romley.scc remove profiling and latencytop features
bsp/intel-common: add intel-core* developer BSPs
preempt-rt.scc: include developer ktype instead of standard
intel-common: add intel-developer-drivers.scc to preempt-rt BSPs
CONFIG_I2C_I801: set option to yes in intel-core* BSPs
bsp: add developer common-pc BSPs
bsp: remove profiling and latencytop from non-developer common-pc BSPs
(From OE-Core rev: 928704f875e541efb61aee2146433c924398fc6c)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The korg stable for 4.4.3 is out with the following changes:
2134d97aa3a7 Linux 4.4.3
e2f712dc927e modules: fix modparam async_probe request
a24d9a2fee98 module: wrapper for symbol name.
82e730baa9f7 itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
1c94da3e7480 posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
565f222968d3 timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
e5e99792b647 prctl: take mmap sem for writing to protect against others
f86701c4f3cd xfs: log mount failures don't wait for buffers to be released
16f14a28f660 Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
7530e6fdd9f2 xfs: inode recovery readahead can race with inode buffer creation
888959f2fd50 libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
8373f6590f6b ovl: setattr: check permissions before copy-up
7193e802960f ovl: root: copy attr
367e439dbc23 ovl: check dentry positiveness in ovl_cleanup_whiteouts()
fa932190a5f3 ovl: use a minimal buffer in ovl_copy_xattr
85a7ed329aca ovl: allow zero size xattr
acaf84251f8d futex: Drop refcount if requeue_pi() acquired the rtmutex
30066dcdf98a devm_memremap_release(): fix memremap'd addr handling
15db15e2f10a ipc/shm: handle removed segments gracefully in shm_mmap()
fe90acff2798 intel_scu_ipcutil: underflow in scu_reg_access()
edfde263bd8a mm,thp: khugepaged: call pte flush at the time of collapse
e31e46725596 dump_stack: avoid potential deadlocks
55e0d9869f1d radix-tree: fix oops after radix_tree_iter_retry
077b6173a8c8 drivers/hwspinlock: fix race between radix tree insertion and lookup
f4595e008149 radix-tree: fix race in gang lookup
262139f0244b MAINTAINERS: return arch/sh to maintained state, with new maintainers
ececa3ebe27f memcg: only free spare array when readers are done
4b20545910cb numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
db33368ca32d fs/hugetlbfs/inode.c: fix bugs in hugetlb_vmtruncate_list()
b105aa33af0d scripts/bloat-o-meter: fix python3 syntax error
dad5038f3fe2 dma-debug: switch check from _text to _stext
275adaf191c6 m32r: fix m32104ut_defconfig build fail
71e5a4a747b0 xhci: Fix list corruption in urb dequeue at host removal
d15298509b86 Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
2231e5748746 iommu/vt-d: Clear PPR bit to ensure we get more page request interrupts
db3ac35cbd31 iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG
7c6471cb94ad iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users
d63a009a9bd9 iommu/amd: Correct the wrong setting of alias DTE in do_attach
c65a7b684133 iommu/vt-d: Don't skip PCI devices when disabling IOTLB
b864f4e50c56 Input: vmmouse - fix absolute device registration
726ecfc32199 string_helpers: fix precision loss for some inputs
5c73252f746d Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
1d70d30a5fa2 Input: elantech - mark protocols v2 and v3 as semi-mt
d1f8217a9a6e mm: fix regression in remap_file_pages() emulation
413aab16bc7b mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
918a2c388ed7 mm: fix mlock accouting
6e8ea2f2258c libnvdimm: fix namespace object confusion in is_uuid_busy()
bd55913cf208 mm: soft-offline: check return value in second __get_any_page() call
a6a3f3ddf6a6 perf kvm record/report: 'unprocessable sample' error while recording/reporting guest data
b58731d6263a KVM: PPC: Fix ONE_REG AltiVec support
921fa9b77380 KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8
b3e336de65eb KVM: arm/arm64: Fix reference to uninitialised VGIC
593337c55ac3 arm64: dma-mapping: fix handling of devices registered before arch_initcall
a6e01f0c81d5 ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
82de5956e9f4 ARM: OMAP2+: Fix save_secure_ram_context for rodata
31a50ee1ad3e ARM: OMAP2+: Fix l2dis_3630 for rodata
98b3f17a7235 ARM: OMAP2+: Fix l2_inv_api_params for rodata
ec776d670e2d ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
6ec8b7c5bbdd ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
3b18631fbcea ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
080fc28fe475 ARM: dts: at91: sama5d4: fix instance id of DBGU
5542d00c4653 ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
a482d9448169 ARM: dts: omap5-board-common: enable rtc and charging of backup battery
41a94b382396 ARM: dts: Fix omap5 PMIC control lines for RTC writes
671a5bc6f54d ARM: dts: Fix wl12xx missing clocks that cause hangs
323f7cd28b7f ARM: nomadik: fix up SD/MMC DT settings
53d991bbbc51 ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
9fe0b68c4949 ARM: 8519/1: ICST: try other dividends than 1
a68f555363f5 arm64: mm: avoid calling apply_to_page_range on empty range
242813b9a1b6 ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
602acfedc981 powerpc/ioda: Set "read" permission when "write" is set
b5311270caba powerpc/powernv: Fix stale PE primary bus
5ecdf58c1945 powerpc/eeh: Fix stale cached primary bus
64f10cf83a6c powerpc/eeh: Fix PE location code
782126b22522 SUNRPC: Fixup socket wait for memory
d0452554b9a1 udf: Check output buffer length when converting name to CS0
eec1445767cc udf: Prevent buffer overrun with multi-byte characters
aef22a3d6945 udf: limit the maximum number of indirect extents in a row
66b8812e87f3 pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn
d65eb5b3dfb1 nfs: Fix race in __update_open_stateid()
c8841e15d6de pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
1873e6f48606 NFS: Fix attribute cache revalidation
dadfe9220750 cifs: fix erroneous return value
7e30995b26cc cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
5d80673404e6 cifs: fix race between call_async() and reconnect()
88413fceab84 cifs: Ratelimit kernel log messages
224f259d9393 iio: inkern: fix a NULL dereference on error
e16eb4bb193c iio: pressure: mpl115: fix temperature offset sign
909e9c55196d iio: light: acpi-als: Report data as processed
377d1f59388f iio: dac: mcp4725: set iio name property in sysfs
1c1d4f2d7629 iio: add IIO_TRIGGER dependency to STK8BA50
dfa6e741d472 iio: add HAS_IOMEM dependency to VF610_ADC
f865d8c326dd iio-light: Use a signed return type for ltr501_match_samp_freq()
e9b0f0e411d0 iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
dc275a6eb9d0 iio: adis_buffer: Fix out-of-bounds memory access
a258a959fcf3 scsi: fix soft lockup in scsi_remove_target() on module removal
900ae746c1e9 SCSI: Add Marvell Console to VPD blacklist
32c55052aa33 scsi_dh_rdac: always retry MODE SELECT on command lock violation
4c654fc9357b drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
d763177d00d7 SCSI: fix crashes in sd and sr runtime PM
dcec7af70910 iscsi-target: Fix potential dead-lock during node acl delete
954bb20f70ed scsi: add Synology to 1024 sector blacklist
5b27adfac012 klist: fix starting point removed bug in klist iterators
152fb02241b6 tracepoints: Do not trace when cpu is offline
2fa82bbbc73a tracing: Fix freak link error caused by branch tracer
6fa74f50e357 perf tools: tracepoint_error() can receive e=NULL, robustify it
6e50ddaf0991 tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines
969624b7c1c8 ptrace: use fsuid, fsgid, effective creds for fs access checks
ba6d92801ba4 Btrfs: fix direct IO requests not reporting IO error to user space
e8eced78e025 Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
be1232bcea11 Btrfs: fix page reading in extent_same ioctl leading to csum errors
df567e6dcd22 Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
b58081d430b4 btrfs: properly set the termination value of ctx->pos in readdir
dfd2961ab6ed Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
4e6943903a8e Btrfs: fix fitrim discarding device area reserved for boot loader's use
c57e49b50bc5 btrfs: handle invalid num_stripes in sys_array
bbfe21c87bd0 ext4: don't read blocks from disk after extents being swapped
600d41f4ecb5 ext4: fix potential integer overflow
33f48f8ab0b9 ext4: fix scheduling in atomic on group checksum failure
5859b9077763 serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
76e88140aa91 serial: 8250_pci: Add Intel Broadwell ports
124efa9fd567 tty: Add support for PCIe WCH382 2S multi-IO card
1bdf16025dfc pty: make sure super_block is still valid in final /dev/tty close
3ceeb564198c pty: fix possible use after free of tty->driver_data
a45f23edb00e staging/speakup: Use tty_ldisc_ref() for paste kworker
3375ee8b9964 phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
a90e66cb949a phy: twl4030-usb: Relase usb phy on unload
a40efb855068 ALSA: seq: Fix double port list deletion
6bb345ac7b30 ALSA: seq: Fix leak of pool buffer at concurrent writes
ef0ca96169a2 ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream
434e26d6f6a0 ALSA: hda - Cancel probe work instead of flush at remove
6deb0ec93da6 x86/mm: Fix vmalloc_fault() to handle large pages properly
e0c89043e71a x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
1e2e0ad1cc16 x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
4f298c10c35d x86/mm/pat: Avoid truncation when converting cpa->numpages to address
75a101ba31fa x86/mm: Fix types used in pgprot cacheability flags translations
(From OE-Core rev: 61fb6887a45a94286c873a61cd2e18fa3f8a6ea5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit:
iwlwifi: mvm: don't allow sched scans without matches to be started
commit 5e56276e7555b34550d51459a801ff75eca8b907 upstream.
The firmware can perform a scheduled scan with not matchsets passed,
but it can't send notification that results were found. Since the
userspace then cannot know when we got new results and the firmware
wouldn't trigger a wake in case we are sleeping, it's better not to
allow scans without matchsets.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=110831
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wu Zheng <wu.zheng@intel.com>
(From OE-Core rev: ecbf5fddb9a6c1b37b1742328d99960301229a25)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
>From Cal:
fixes the issue where Skylake doesn't have graphics support
by default before kernel version 4.4, and also brings the kernel
metadata closer together for intel-* and common-pc* BSPs.
[YOCTO 9#319]
(From OE-Core rev: 30d674f9077ddf5cd2190895869ee1226f0c2796)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating fixes for yaffs2 on the 4.4.x kernel:
d4eb3ab036f8 yaffs2: using new ->follow_link() and ->put_link() calling conventions
da1c7fd61d13 yaffs2: NULL ->read/->write
b4c6a6aca7e7 yaffs2: replace f_dentry to f_path.dentry
(From OE-Core rev: 28a4e922373b21e0b2e8765b422f8e5a4610441f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the korg -stable update to 4.1
(From OE-Core rev: cf56b7345935af71dd0989ef2e7c8ce2d43fd04d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following clkdev updates to the 4.1 kernel:
c1b6f28fb457 clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
f9a70df2d491 clk: update clk API documentation to clarify clk_round_rate()
db2d98fa3908 clkdev: fix clk_add_alias() with a NULL alias device name
1b2c3a175637 clkdev: add clkdev_create() helper
9b3d61ea0c57 clkdev: const-ify connection id to clk_add_alias()
76b7b02f10dc clkdev: drop __init from clkdev_add_table()
22f16b822d18 clkdev: use clk_hw internally
(From OE-Core rev: 56bd6862f083a006e193c25c66f29443f3d0f095)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following patches for improved galileo support:
e02ac252f68d gpio-pca953x: add "drive" property.
68d3fd5134f7 adc1x8s102: support ACPI-based enumeration.
89f6aea44d01 staging:iio: add support for ADC1x8s102.
2fb3159a70c0 spi-pxa2xx: fixed ACPI-based enumeration of SPI devices.
510501941fd3 pca9685: PCA9685 PWM and GPIO multi-function device.
94bfb66b8887 gpio: pca953x: provide GPIO base based on _UID
c39f26cd9092 acpi: added a custom DSDT file.
(From OE-Core rev: e901ce43d789e26ec0524153c5665cd2dbeed374)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This depmodwrapper is a wrapper script to support install-corss,
which is invoked at do_rootfs time. So the depmodwrapper-cross
should not generate packages. The fix could avoids QA buildpaths
issue.
[YOCTO #7058]
(From OE-Core rev: e469717d324b3aa29f165c7dc242c9d634be168f)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
v4.5-rc1 of the kernel splits the subcommand related files
from perf into a new library, this patch adds the modification
of the Makefile to preserve the --sysroot option as for
the other perf related Makefiles.
(From OE-Core rev: e46eae34ac71d28aa92feed369c2d92248ed3e19)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following upstream commits to the 4.1 yocto tree:
bdf4565e5dcc capabilities: add a securebit to disable PR_CAP_AMBIENT_RAISE
2483c95caedc selftests/capabilities: Add tests for capability evolution
4c274aa74e5d capabilities: ambient capabilities
(From OE-Core rev: e864caec7a9b522d86d164ffbaadaa4ea7de0f9b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have an issue with PAT handling on older processes with limited PAT bits,
see the patch description for the full problem. This replaces the runqemu
workaround with a kernel patch until we can get the kernel trees sorted
out and discuss a proper fix with upstream. It should be safe everywhere
so is applied unconditionally.
(From OE-Core rev: e00f0794a535c8e68ae1c87c8b01dd65645d570b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 branches with backported mainline support for the
galileo.
a5327464dad9 iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors
7a868ce12675 pwm-pca9685: enable ACPI device found on Galileo Gen2
9f169f0f6493 at24: enable ACPI device found on Galileo Gen2
8b662e6343a1 gpio: pca953x: support ACPI devices found on Galileo Gen2
a9939d26a6a0 gpio: pca953x: store driver_data for future use
52355b7a7fee mfd: intel_quark_i2c_gpio: support devices behind i2c bus
ba850c2a9965 mfd: intel_quark_i2c_gpio: load gpio driver first
8b322e7df2bf mfd: core: redo ACPI matching of the children devices
23c1fb4bc37d i2c / ACPI: Rework I2C device scanning
f7eea071b03c gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found
bdc90004c8d5 GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use
447db37b6df9 gpio / ACPI: Add support for retrieving GpioInt resources from a device
edce965b0881 i2c: fix leaked device refcount on of_find_i2c_* error path
f9b93689fdf5 i2c: core: only use set_scl for bus recovery after calling prepare_recovery
a10a703575bd i2c: core: Reduce stack size of acpi_i2c_space_handler()
ad91512127cd i2c: core: fix typo in comment
b16ba95782f1 i2c: check for proper length of the reg property
028a8d9209b7 i2c: slave: add error messages to slave core
58551fe2320d i2c / ACPI: Assign IRQ for devices that have GpioInt automatically
85153945ad9e i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
(From OE-Core rev: 2ff6c2ca2e22eaef37ccb4025bc0b78c42695eed)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the -stable korg release with the following changes:
2d5f6b041335 Linux 4.1.17
d17367a77457 recordmcount: Fix endianness handling bug for nop_mcount
1f6d936d33f4 arm64: restore bogomips information in /proc/cpuinfo
705164dbe08f mn10300: Select CONFIG_HAVE_UID16 to fix build failure
57b7d61c2d89 fix the regression from "direct-io: Fix negative return from dio read beyond eof"
8885e7f3d76a direct-io: Fix negative return from dio read beyond eof
b824d64b153a media/vivid-osd: fix info leak in ioctl
3f0cf7dcf712 staging: lustre: echo_copy.._lsm() dereferences userland pointers directly
b50a2b556d1e HID: core: Avoid uninitialized buffer access
c777e9ab2a44 parisc iommu: fix panic due to trying to allocate too large region
e479822e1e3a iommu/vt-d: Fix ATSR handling for Root-Complex integrated endpoints
f21731a54a66 arm64: mm: ensure that the zero page is visible to the page table walker
3e804c36399e arm64: Clear out any singlestep state on a ptrace detach operation
426bfb6a7784 ARM/arm64: KVM: correct PTE uncachedness check
3f0b20e1a2d8 arm64: fix building without CONFIG_UID16
f94cf332a806 arm64: KVM: Fix AArch32 to AArch64 register mapping
959cad3a68a7 ARM/arm64: KVM: test properly for a PTE's uncachedness
75f1fde24b56 arm64: kernel: pause/unpause function graph tracer in cpu_suspend()
f22c64cd0745 arm64: bpf: fix mod-by-zero case
40c5dde6eb7e arm64: bpf: fix div-by-zero case
8831ded35abd recordmcount: arm64: Replace the ignored mcount call into nop
a33b8ff3d6cb powerpc/module: Handle R_PPC64_ENTRY relocations
1e2c53f19cef scripts/recordmcount.pl: support data in text section on powerpc
4126ac7cdcef powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered
af69fe1f70af powerpc: Make value-returning atomics fully ordered
1e14dd5a3864 powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
a54d3a423412 powerpc/tm: Check for already reclaimed tasks
567a215dd158 powerpc/tm: Block signal return setting invalid MSR state
eeca98948d8c xfrm: dst_entries_init() per-net dst_ops
139bd872dc68 xen-netfront: update num_queues to real created
a1edfa789d1a xen-netfront: respect user provided max_queues
21edf40b5ccb xen-netback: respect user provided max_queues
534e9016cd88 sctp: Prevent soft lockup when sctp_accept() is called during a timeout event
490c963c1eb9 team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
95785b105fa2 batman-adv: Drop immediate orig_node free function
ae3eb44e0e8b batman-adv: Drop immediate batadv_hard_iface free function
924224c6e44a batman-adv: Drop immediate neigh_ifinfo free function
620493a90c78 batman-adv: Drop immediate batadv_neigh_node free function
9d188c6b672c batman-adv: Drop immediate batadv_orig_ifinfo free function
34c5bf7c7bf4 batman-adv: Avoid recursive call_rcu for batadv_nc_node
016cb1d02db9 batman-adv: Avoid recursive call_rcu for batadv_bla_claim
a50a93cc9928 ppp, slip: Validate VJ compression slot parameters completely
5984398539a2 isdn_ppp: Add checks for allocation failure in isdn_ppp_open()
9ba3d77689a5 tcp/dccp: fix old style declarations
479b539a3101 tcp/dccp: fix timewait races in timer handling
332fb8799ed1 bridge: fix lockdep addr_list_lock false positive splat
2980502b9f6d ipv6: update skb->csum when CE mark is propagated
dc1cfcc26697 net: bpf: reject invalid shifts
2a1e5e4ab662 phonet: properly unshare skbs in phonet_rcv()
7d9fb947be67 bonding: Prevent IPv6 link local address on enslaved devices
abefd1b4087b net: preserve IP control block during GSO segmentation
4bb526bce19d udp: disallow UFO for sockets with SO_NO_CHECK option
e7bbeacbafc1 tcp_yeah: don't set ssthresh below 2
add92082e2d1 ipv6: tcp: add rcu locking in tcp_v6_send_synack()
bcea43fb3164 net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memory
a33704eb6085 vxlan: fix test which detect duplicate vxlan iface
8f5cd6eea811 net: possible use after free in dst_release
02a1fef61d06 net: sched: fix missing free per cpu on qstats
5596242a6263 net: filter: make JITs zero A for SKF_AD_ALU_XOR_X
a6b1d2489380 bridge: Only call /sbin/bridge-stp for the initial network namespace
dc6b0ec667f6 unix: properly account for FDs passed over unix sockets
f45f0213b831 connector: bump skb->users before callback invocation
c000d76ec0d8 sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close
45d52b0b1f9f net: cdc_ncm: avoid changing RX/TX buffers on MTU changes
6866b52c56db addrconf: always initialize sysctl table data
8a39e24931d1 ipv6/addrlabel: fix ip6addrlbl_get()
57d0c018b46e veth: don’t modify ip_summed; doing so treats packets with bad checksums as good.
3fabd53542c8 xhci: refuse loading if nousb is used
3f5e25aa380d USB: cp210x: add ID for ELV Marble Sound Board 1
887c3cc2557b USB: ipaq.c: fix a timeout loop
a7e83b16c8d8 USB: fix invalid memory access in hub_activate()
5241134a79fa airspy: increase USB control message buffer size
abcbfda367d4 usb: xhci: fix config fail of FS hub behind a HS hub with MTT
1f6a2cc39913 ASoC: compress: Fix compress device direction check
20091f9139bc ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz
6ac84206a212 ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx
1fce19176555 ASoC: wm8974: set cache type for regmap
5a1109e05e09 ASoC: es8328: Fix deemphasis values
64fa05313b0a ASoC: wm8962: correct addresses for HPF_C_0/1
1c98861e6467 ASoC: rsnd: fixup SCU_SYS_INT_EN1 address
b309c8bf5a4a ALSA: timer: Handle disconnection more safely
2b332719b8f0 ALSA: hda - Flush the pending probe work at remove
a63fabd4ac6c ALSA: hda - Fix bass pin fixup for ASUS N550JX
efcf073d7fa1 ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0
965b1203f399 ALSA: hrtimer: Fix stall by hrtimer_cancel()
281bedb8728f ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode
d1a55757feff ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode
dc5697eb3297 ALSA: timer: Fix double unlink of active_list
ac905ca58370 ALSA: timer: Fix race among timer ioctls
042b42c579b9 ALSA: hda - fix the headset mic detection problem for a Dell laptop
466c99bd815a ALSA: timer: Harden slave timer list handling
27b496cc9e8c ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
6aee1f8440bf ALSA: hda - Fix white noise on Dell Latitude E5550
49c9eb3db864 ALSA: seq: Fix race at timer setup and close
9a6003a362ac ALSA: seq: Fix missing NULL check at remove_events ioctl
aa13585b6672 ALSA: usb: Add native DSD support for Oppo HA-1
37191bd8b4dd ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2)
b40f630cfe4d ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()
73a5fdacba1f ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly
271126c7cbb6 ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
228a0e09d53a ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads
be7c9844eea1 ALSA: hda - Apply click noise workaround for Thinkpads generically
dff55bf1b247 ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd
bc4d35b2c8c7 ALSA: hda - Fix noise problems on Thinkpad T440s
c5e609dc5cab ALSA: hda - Add inverted dmic for Packard Bell DOTS
af95ff49d83b ALSA: rme96: Fix unexpected volume reset after rate changes
9bc3da2497b3 ALSA: hda - Fix noise on Gigabyte Z170X mobo
842dd2467a24 ALSA: hda - Add fixup for Acer Aspire One Cloudbook 14
5c7e814c1b3a ALSA: hda - Apply HP headphone fixups more generically
c397bc975aa4 ALSA: fireworks/bebob/oxfw/dice: enable to make as built-in
055fb07950be ALSA: hda - Apply pin fixup for HP ProBook 6550b
29923678a8ef ALSA: hda - Add Intel Lewisburg device IDs Audio
e702f5856baa ALSA: hda - Disable 64bit address for Creative HDA controllers
69bed67bc32f ipmi: move timer init to before irq is setup
8dfca273353b ipmi: Start the timer and thread on internal msgs
c1a631b482a7 x86/mm: Improve switch_mm() barrier comments
ae535caf02c7 x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
4b6c3a55305d x86/boot: Double BOOT_HEAP_SIZE to 64KB
eec2baa86479 x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
17f33d468f4d KVM: x86: correctly print #AC in traces
8a3185c54d65 KVM: x86: expose MSR_TSC_AUX to userspace
e052d6eeedf1 KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR
19eaffefc4b0 KVM: svm: unconditionally intercept #DB
03e572f3dda7 KVM: VMX: fix SMEP and SMAP without EPT
c12a3752a390 x86/xen: don't reset vcpu_info on a cancelled suspend
702d87e2ff77 xen/gntdev: Grant maps should not be subject to NUMA balancing
3ab6a090acfb x86/signal: Fix restart_syscall number for x32 tasks
c24eedeca7b8 x86/mpx: Fix instruction decoder condition
(From OE-Core rev: 8dd87247c224877c2948364048b736abc8e633e7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for the nios2 architecture.
(From OE-Core rev: a4292d508c2747d2543302404d877fff58f8b1d1)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ptest .la files are just getting copied into new directories, we need
to relocate them and update the paths within.
(From OE-Core rev: 94ee0470af875501ef76ceff2c7e239f34a11495)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Update to latest linux-firmware
- Renamed qat_dh895xcc_firmware to qat_firmware based on commit
8d1f7a11
- Updated license info for the ath9k_htc firmware
(From OE-Core rev: 0753c6f4d97f7d4eeb88c97ab1dfefbe45dbcdbf)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to expand SELECTED_OPTIMIZATION later, so
do not immediate expansion, and do the work in
anonymous python function.
It is reasonable to give an error for -O0.
[YOCTO #7058]
(From OE-Core rev: 3d2455c1959283b956cb7536cd866717fefc10e8)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kdump init script/configuration files are under ${sysconfdir}, not ${sysconfig}
and should be packaged into kdump sub-package
(From OE-Core rev: 13cedd57ad4a449b749c29d30bb499c1c073a680)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use bash-completion.bbclass to package bash completions.
(From OE-Core rev: 4f0716690ff4c7169b07e352df2301e77a3abc03)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following CVE update:
Author: Yevgeny Pats <yevgeny@perception-point.io>
Date: Tue Jan 19 22:09:04 2016 +0000
KEYS: Fix keyring ref leak in join_session_keyring()
This fixes CVE-2016-0728.
We also integrate the 4.4-rt3 version.
(From OE-Core rev: cca987b2f62dc6b51a02564ccd4041bde2897f13)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches have revealed issues with linux kernel headers which has
been proposed upstream but hasnt been applied yet
(From OE-Core rev: 8d760bd9df101a03f148205e7d79b555b4dfd8c7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the lib-headers to match the 4.4 LTSI kernel version.
(From OE-Core rev: 046b1f4cf439e36c8e8a4904f8e8014a9ea733e2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init script kdump is added, so inherit update-rc.d
(From OE-Core rev: 4b4bb1e905cc20462f4fbc1105ac3fac7af93b15)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 4.4 kernel has been under test via linux-yocto-dev, and is the next
LTS/LTSI kernel.
So we take our -dev support and created a named/versioned recipe for use
in upcoming releases.
(From OE-Core rev: 2dbc788bc3988532f0932e8e51e24ba702c28f6a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This works around a limitation of the chkconfig update-alternatives, so it
works with all our update-alternatives providers.
(From OE-Core rev: f78c640f1f41eb12ef7919e7dc99aae7db6f6b17)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In preparation for the introduction of new (supported) kernel versions,
we remove the 3.14 and 3.19 variants.
The kernel trees will still be available, but the recipes are removed
from master. These versions can still be built on older releases, or
with private copies of the recipes.
3.14 LTSI is replaced by the 4.1 LTSI kernel, and 3.19 will be replaced
by 4.4+.
(From OE-Core rev: 6814521d0b88ee66442158ed70e77cbdd35d4782)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 kernel repo to the latest 4.1.x stable.
(From OE-Core rev: 1df3a79cf454754e6be6c1ffc91ba8310a880616)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest 2.7 stable commit which incorporates changes
for building against the 4.4-rc kernel series.
(From OE-Core rev: a9fe7afafc7645d33941926e097c7d88cbcbfa53)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto SRCREVs to pull in the following change:
Author: He Zhe <zhe.he@windriver.com>
Date: Wed Dec 2 01:31:31 2015 -0500
fs/yaffs2: fix missing checkpoint on yaffs
For yaffs file system, the mode of reading or writing is restricted
at four pointer where are mnt->mnt_flags,mnt->mnt_sb->s_flags,mtd->flags and
dev->read_only,the first three is used handle file and file
system(eg,remount) operation, and last one(dev->read_only) almost is
used handle checkpoint of yaffs2. However, in current code, the
dev->read_only only can be changed at first time when the yaffs2
file system is mounted, later it can't be changed again(eg,mount -o
remount), the result is that the checkpoint's saving operation
always can't succeed if you set readonly mode for yaffs2 file system
when it is mounted at the first time.
To fix this issue, we implement yaffs_remount_fs() which allows the
rootfs to be remounted as r/w.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 289fd2bf61d0761a93d17f18b9079fc9f61e0031)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop 0001-ioctl.c-Fix-build-on-3.19.patch and
0002-Fix-tests-Makefile-usage-of-LDLIBS-vs.-LDFLAGS.patch, the code
has been fixed upstream.
(From OE-Core rev: 762b3111f3124ee75404835da751fb95b8466fd4)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the script file kdump,it provides the follow support:
1. Load a kdump kernel image into memory;
2. Copy away vmcore when system panic.
(From OE-Core rev: c2492edcb9366ed1741fc6be7d41bc17844041fd)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some recipes overly-split -dbg packages were merged into PN-dbg. Unless
there's a very good reason, recipes should have a single -dev and -dbg package.
(From OE-Core rev: a3b000643898d7402b9e57c02e8d10e677cc9722)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the autodebug package generation logic, specifically setting FILES_${PN}-dbg
isn't needed in most cases, we can remove them.
(From OE-Core rev: 3ab59d49dd7c18e194b58d1248b4b87709b5a738)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code has support and checks for Python 2 and Python 3 however
during the development of 2.7 release a requirement for Python 3 was
included.
The Python 3 is required for runtime tests to run however those are
not in use now so we can just disable the enforcement for now.
This reverts the commit restoring the Python 2 support.
(From OE-Core rev: 8807f4fd8a9ccdcdec016d87fd18fd0717f35dca)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These OE default make flags are not required for KBuild packages.
(From OE-Core rev: 3946eefd95272e02f864cf7949919cc097601875)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add latest available firmware binaries for RTL8192CX chipsets.
These new firmwares have been released in 2012, have been used
by the mainline kernel as preferred firmware since 3.13 and
even backported to stable branches.
(From OE-Core rev: 2dc67b53d1b7c056bbbff2f90ad16ed214b57609)
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the 4.4 fix for 6lowpan:
Author: Wu Zheng <wu.zheng@intel.com>
Date: Fri Nov 20 13:25:57 2015 +0800
Bluetooth:Fix the connection fail of 6lowpan over BT LE
When two devices with 6lowpan over BT LE connect each other,
6lowpan over BT LE channel is set up between the two devices.
However, the status of channel is not right.
It always is set to CONNECTED and the channel can't be created.
The status of channel need to be removed when connection is created.
(The patch's reference from
b0c09f94ff1660a1873549b788c998284ea5fb8a)
Signed-off-by: Wu Zheng <wu.zheng@intel.com>
(From OE-Core rev: 2b6a6cad90bfef3afd5a721ec985f71336914fa7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1-rt kernel to the latest and greatest upstream version.
(From OE-Core rev: 22912a99163402581e8e92dcacbf46f9049f6ff9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 SRCREVs for:
Update the mpc8315erdb.dts to contain the eeprom device
information. Coupled with adding "MISC_DEVICES" into the
kernel configuration, we have a working eeprom.
Signed-off-by: Jingdong Lu <jingdong.lu@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 47a222ad6f3ee8b14b9eea28b63397077978f42f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 kernel to the latest stable (and resolving minor
conflicts with -rt).
(From OE-Core rev: 12be8565b16f0fb571f859d3ef256767feaafc7f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lttng-sessiond program uses pthread_cancel, whose implementation
in glibc requires libgcc_s.so.1 to be present.
(From OE-Core rev: fff5fe9f356098457c4fd56cb95c3e8afde2defb)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runtest.patch is unused, so there is no reason to keep it on the
tree.
(From OE-Core rev: c1fb471dc83206f3940108319fca760b39cbbac7)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This quiets a GNU_HASH warning.
(From OE-Core rev: ad8a2ca46075a7ea236d6db9da963dc0040d2206)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the gtk dependencies optional.
(From OE-Core rev: 191a1817c9dce90f3094bc98d6e0f5ab02f8a5c7)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only have a short description, so set SUMMARY and DESCRIPTION
will be defaulted from it.
(From OE-Core rev: 1d655e2407267ed91e371e078e9a9a10183e3d62)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The for loop already handles the case when KERNEL_DEVICETREE is empty.
(From OE-Core rev: 49010f4a1ae9570e96691c9faeb17808174488fe)
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to use virtio devices as default in runqemu script
because these drivers are designed to use in vrit providing
better performance.
[YOCTO #8427]
(From OE-Core rev: 16dad3a6ccba01639b3a711426599af49c30a088)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the META SRCREVs to make the nf_tables feature available.
(From OE-Core rev: 43ed2494ae4f89cab6e018f289bb048289d478f5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to apply the same fix as 3.14 and 4.1 already
have to fix qemuarm boots with gcc5.x
[YOCTO: #8415]
(From OE-Core rev: fa9852d5d7383e6d03c756b8ad615668857b0b86)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the recent changes to improve patch processing times, the ability
to skip already applied patches is not active by default.
The automatic detection and resume was hiding issues with the include
files generated by scripts like yocto-bsp.
If a .scc file that contains a patch is included twice, the patch is
applied twice, and the second appliation fails for obvious reasons.
We can partially fix this by ensuring that already included
configuration fragments are not forced into the meta-series.
.scc files that are explicitly listed twice will continue to fail, and
recipes must be modified to avoid this.
[YOCTO: #8486]
(From OE-Core rev: ed2da98bf3ac798009f58a53b91285b4dac69d5a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 SRCREVs to integrate the following fix:
[
drm/i915: Fix the VBT child device parsing for BSW
Recent BSW VBT has a VBT child device size 37 bytes instead of the 33
bytes our code assumes. This means we fail to parse the VBT and thus
fail to detect eDP ports properly and just register them as DP ports
instead.
Fix it up by using the reported child device size from the VBT instead
of assuming it matches out struct defintions.
The latest spec I have shows that the child device size should be 36
bytes for rev >= 195, however on my BSW the size is actually 37 bytes.
And our current struct definition is 33 bytes.
Feels like the entire VBT parses would need to be rewritten to handle
changes in the layout better, but for now I've decided to do just the
bare minimum to get my eDP port back.
Cc: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 90e4f1592bb6e82f6690f0e05a8aadcf04d7bce7)
Signed-off-by: abdul arif abdul muttalib
<abdul.arif.b.abdul.muttalib@intel.com>
Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
(From OE-Core rev: 1f575df04f003c1e1fe9413f95023c20a2f30e19)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the configuration fragments for the Intel Axxia on the 3.14
and 4.1 kernels.
(From OE-Core rev: a4964955257a1ab2586fd5efeedc2e32b725895d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The source makes no reference to KERNELDIR any more and this make the recipe
machine specific. Simply drop the unused reference.
(From OE-Core rev: 21bad4c807acd4c596fcca8afeab737161fbbb39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to import the following fix:
kgit-meta: resume after last applied patch
When the auto-resume (resume point detection) was removed from the
processing of a meta-series, it ignored the fact that a single patch
series may in fact be processed a number of times.
Two layers patching a kernel will generate two different runs on the
same branch, which always start at patch one. This will obviously
break with duplicate patches.
To avoid this, we simply track the last patch applied, and
explicitly
tell the patch scripts where to start. This gets us resume
functionality, without the overhead of resume point detection.
(From OE-Core rev: 692f1333e257556e7462b2436dd60e865869349c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 SRCREVs to integrate the following DRM backports:
a8abc111a96d drm/i915: Only wait for required lanes in vlv_wait_port_ready()
81354180432b Revert "drm/i915: Hack to tie both common lanes together on chv"
d660fc117731 drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
0e797e9cb717 drm/i915: Implement chv display PHY lane stagger setup
(From OE-Core rev: 2ea7533b5d45bb459284dd1c3f81d4bcac88f882)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some important fixes and CVEs in 4.1.8, so we update the
SRCREVs to integrate the -stable changes.
(From OE-Core rev: 0cd10fc32fd6a3faced69ef206271c8afde17533)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the axxia preempt-rt integration, the preempt-rt
branch now becomes standard/preempt-rt/base, to allow proper
branch inheritance as: standard/preempt-rt/axxia/base.
No functional changes happen to the base -rt, just the default
KBRANCH changes.
(From OE-Core rev: 5c91535baf876a3e2c4fd91be046dc3a92dc0ad2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gettext 0.16.1 doesn't install any m4 files to sysroot, please see
the following commit:
commit 9e10db5bdf
Author: Christopher Larson <kergoth@gmail.com>
Date: Mon Mar 17 18:10:54 2014 +0000
gettext-0.16.1: kill target m4 macros from sysroot
This is aim for using gettext-native's macros(gettext-native-0.19.4),
but when we set:
PREFERRED_VERSION_gettext = "0.16.1"
And build the recipes like pcmanfm, we would get errors when
do_configure:
configure:5164: error: possibly undefined macro: AM_NLS
This is because autotools_copy_aclocals doesn't copy the native macros
for target unless they're direct dependencies.
Add gettext-native to DEPENDS will fix the problem.
(From OE-Core rev: 48c168334bb60937653ab782026948d139603f8e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you currently do a DISTRO_FEATURES_remove = "x11" with OE-Core, you
see failures due to dependency problems. The work in resolving this was
partially completed a while back. This adds in the markup mainly for
gtk/gtk3+ recipes and means "bitbake world" will work successfully.
Rather than code the gtk/gtk+ specific distro features into each recipe,
a shared variable is used.
(From OE-Core rev: ef967c70182eeccb59c7511d838a7ecb0b2315c1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -rt build suffered the same breakage in master as the standard
kernel builds: due to a bad git history merge, existing patches were
dropped from branches.
This meant that we were missing the -rt changes, which re-introduced
some failures with linux-yocto-rt.
With these SRCREV updates, we have the latest 4.1.x-rt and all
architectures build.
(From OE-Core rev: 96db930d8add6623168ec5e638769d5c0f348265)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREVs to integrate the following config change:
Author: Saul Wold <sgw@linux.intel.com>
Date: Tue Sep 22 07:23:06 2015 -0700
common-pc-drivers: add CONFIG_PATA_SCH
The NUC uses this hardware and should still operate correctly with a
genericx86
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: c597c230b4f66bd04d47a448a00cf54fca71c0f2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting the SRCREVs to import the following changes in the
4.1 kernel tree:
79a31b9d23db hid-core: Avoid uninitialized buffer access
121593d3a0a4 aufs: call mutex.owner only when DEBUG_MUTEXES or MUTEX_SPIN_ON_OWNER is defined
efa7952a190f Bluetooth: Delay check for conn->smp in smp_conn_security()
69428ec43bd9 cc2520: set the default fifo pin value from platform data
ee0ddf37f3d6 fs/yaffs2: Fix a judgement logic for ACL operations
fff29e47f5c4 yaffs2: remove read and write methods
b3b9d030ad84 yaffs2: replace f_dentry to f_path.dentry
(From OE-Core rev: 6398e9be3c3a2af5e650a4e7ee7f8f61c7b520fd)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make nios2 kernel depend on libgcc.
In arch/nios2/Makefile, it adds LIBGCC to libs-y:
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
libs-y += $(LIBGCC)
In file Makefile in top directory, libs-y is assigned to to var
KBUILD_VMLINUX_MAIN. It uses script link-vmlinux.sh to link vmlinux.o,
and when execute function vmlinux_link() in link-vmlinux.sh,
KBUILD_VMLINUX_MAIN is passed to ${LD}.
If build without libgcc, the value of LIBGCC is just libgcc.a without
parent directory. linux-yocto fails to build:
| LD vmlinux.o
| nios2-poky-linux-ld.bfd: cannot find libgcc.a: No such file or directory
Add libgcc to nios2 kernel dependency.
(From OE-Core rev: d3ccab5bb717da57dcaaeb1993ae0f790ce45dcb)
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get upstream patch from lttng-tools github:
<https://github.com/lttng/lttng-tools>
<commit:700c5a9d4dc7b552926b8ddcbba91cc13312aba0>,
for solving the filtered tracepoint disabling error.
The use of a simple lookup and match on event name is insufficient
to identify the corresponding ust app event.
(From OE-Core rev: 60f8c0e679f70f4477472d7895fddff12530a929)
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 SRCREVs to integrate the following commit:
hid-core: Avoid uninitialized buffer access
hid_connect adds various strings to the buffer but they're all
conditional. You can find circumstances where nothing would be
written
to it but the kernel will still print the supposedly empty buffer
with
printk. This leads to corruption on the console/in the logs.
Ensure buf is initialized to an empty string.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[dvhart: Initialize string to "" rather than assign buf[0] = NULL;]
Cc: Jiri Kosina <jikos@kernel.org>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 1c6c1af385a481b0a57ab06cd40af56be3425cc8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to integrat the following commit:
patching: only validate user supplied patches by default
Previously the patching tools would consider both system and user
supplied patches in the same manner .. they are simply a series of
patches to be applied to a branch, and that the scripts should determine
where in the series to start (based on what is already on the
branch).
This detection was causing a few problems:
- time consuming
- starting in the middle of a series when intermediate patches
were merged to a branch.
To solve both the performance and start detection, we instead simply
note the transition from system (i.e. already defined features and
series) and user/recipe supplied patches. When the transition is noted,
the system will start pushing ALL patches without doing autoresume
detection.
Control in keeping the series up to date is passed to the user, and
consistent behaviour/performance is achieved.
(From OE-Core rev: 440ad49e53359ea800c179df105ab885873d7691)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 SRCREVs to integrate the following changes:
f830ab33799d aufs: call mutex.owner only when DEBUG_MUTEXES or MUTEX_SPIN_ON_OWNER is defined
87df2e93ed65 Bluetooth: Delay check for conn->smp in smp_conn_security()
b09c3eab3e50 cc2520: set the default fifo pin value from platform data
62b01c325d42 fs/yaffs2: Fix a judgement logic for ACL operations
1d19c4e95cfc yaffs2: remove read and write methods
2c822dbc43b9 yaffs2: replace f_dentry to f_path.dentry
(From OE-Core rev: c49ddbf254c2d170d0aeced78ef6c87e60736a26)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${B} is the default cwd of tasks, so there might be race issues such as:
| mkdir: cannot create directory `/path/to/work/qemux86-poky-linux/perf/1.0-r9/perf-1.0/': File exists
[snip]
NOTE: recipe perf-1.0-r9: task do_configure: Failed
(From OE-Core rev: d41e9fc53230a8fd911c61e018ea901caee4cafc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Perf source code between Yocto and upstream are different, like below
commit is not in upstream, so broaden the "--root" replacement to Makefile*
commit 33e96fb1e2d77541e81eb341ccd3fbe9419e4c9a
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Tue Jul 3 13:07:23 2012 -0500
perf: change --root to --prefix for python install
Otherwise we get the sysroot path appended to the build path, not what
we want.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
(From OE-Core rev: c849ed0c66a2fb7d91795c421eb4c87b47d03c0d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If base_bindir is not a direct child of / the link creation in
do_install_append creates incorrect relative links.
Instead pass a full path to the link source too the lnr script
to create a relative link.
(From OE-Core rev: dc184ace9d72a2d4f8eeec831942663cd3b1fd47)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a variety of problems such as typos, bad punctuations, or incorrect
Upstream-Status values.
(From OE-Core rev: bd220fe6ce8c3a0805f13a14706d3130ea872604)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-r is understood by gcc but not by clang, anyway its a linker option so
pass it straight to linker by using -Wl explicitly
(From OE-Core rev: 3f4ab836d7d9b7a994b65ab8c7ebf6ff65e6277b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clang is stricter with syntax checking and flags the functions return
values if they dont match with function signatures, Fixed thusly
(From OE-Core rev: 91b8c2900570720d56a123a90e927f49a6a6095f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. $(grep xxx xxx) never returns 0, it maybe return empty or string, and
can not compare with 0, this fixes that python module never are installed.
2. python library is installed into /usr/lib/ by default, but we expect
it is installed into ${libdir}, so add --install-lib parameter for python
setup.py to set the library dir;
this fixes not shipped warning, since python modules are installed into
/usr/lib/, but FILE_${PN}-python expects it is under ${libdir}, which is
/usr/lib64/ for 64bit machine
3. the makefile target install-python_ext is moved from Makefile to
Makefile.perf from linux v3.13, so match install-python_ext in Makefile.*
and --root='/\$(DESTDIR_SQ)' before linux v3.13 will install the target
python library to native sysroot, so replace it with --prefix as after linux
3.13;
this fixes not shipped warning, and install target files to native dir, like
below:
ERROR: QA Issue: perf: Files/directories were installed but not shipped in any package:
/home
/home/pokybuild
/home/pokybuild/yocto-autobuilder
/home/pokybuild/yocto-autobuilder/yocto-worker
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7/site-packages
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7/site-packages/perf.so
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7/site-packages/perf-0.1-py2.7.egg-info
(From OE-Core rev: 43f965061f8af4c4537e9d9c0257253e613a616d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upating the SRCREVs to import the following commit:
Author: Kevin Hao <kexin.hao@windriver.com>
Date: Mon Aug 31 19:34:48 2015 +0800
mips: octeon: use ll/sc for the atomic ops for all the predecessor
of octeon2
Even the octeon plus has the support of the 'saa' instruction, but
we
don't have a way to distinguish between octeon and octeon plus at
compile time and pass "-march=octeon" to all the predecessor of
octeon2. So it will cause the following error when trying to
assemble
the "saa" instruction with option "-march=octeon":
{standard input}: Assembler messages:
{standard input}:360: Error: Unrecognized opcode `saa $2,($4)'
scripts/Makefile.build:308: recipe for target
'arch/mips/cavium-octeon/executive/cvmx-lap.o' failed
Forcing to use the "ll/sc" for the atomic ops for all the
predecessor
of octeon2 to fix this issue.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: a31c715fe484af7fe582d8becac0f20a33acac42)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oprofileui uses gettext during the configuration task so should be inherit
gettext. This issue appears when an older version of gettext is used do to
pinning to the older non-gplv3 version.
[YOCTO #7795]
(From OE-Core rev: 4734ebef1c5259791daba8ce2ce6dd4ddd5d087b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At a guess, Bruce's scripts have mixed up the -rt and on -rt versions
of the qemuppc branches. Set this to a revision on the
standard/qemuppc branch.
(From OE-Core rev: d19f6900a07a718660fcd75d36a3facf048ce157)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Booting qemuarm when the kernel was built with gcc 5.x would result in
a boot hang (or at least no visible output).
Updating the SRCREVs for the following change:
Author: Jianchuan Wang
Email: jianchuan.wang@windriver.com
Subject: Omit to optimize vsprintf.c/kasprintf.c
Date: Wed, 26 Aug 2015 13:54:57 +0800
Add "-O0" for vsprintf.c/kasprintf.c
Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com>
While this may not be the final fix (it still has to go usptream and
be better explained), it gets us booting, so is good enough for the
time being.
(From OE-Core rev: 8610017e4e017ddc59d76e64c4d4557fcffc363e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -dev kernel is now tracking 4.2 content, so we update the
linux-yocto-dev recipes PV to match.
(From OE-Core rev: fc22f6ee38731e60b2bc15640fa697e5af663422)
(From OE-Core rev: 468fef1ccfcc5495b6d20576864269da0cdba948)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREVs for the following changes:
92977854ff52 graphics: disable CIRRUS DRM for qemumips and qemuppc
57f4dc4dfe16 intel-quark: Enable thermal support
(From OE-Core rev: 5c9d414fc8e88cd5ef8e7e530ba4c5e788e03bb7)
(From OE-Core rev: d0cc398d3cd47963fbe3fa22db0a1e73c162e67f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to enable cirrus graphics emulation and wider
compatibility for the ext4 driver.
[YOCTO: #7348]
[YOCTO: #6667]
(From OE-Core rev: 530c51e5354d5cd233b7015a3d0dfe94cb9cbaa1)
(From OE-Core rev: db02cf0734ce059b7bf47edeb1107e23e20e7160)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the SRCREVs to import the latest 4.1-stable and 4.1-rt changes.
(From OE-Core rev: 21fd4093bbd0177453a1e749d825cf510746f201)
(From OE-Core rev: 576fb9f267f7dbca2b76a68903f335be108160e7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 SRCREVs to match the latest kernel meta data updates
and also to merge four patches Richard Purdie located that fix the
gcc 5.x ARM build (we still have boot issues, but building is the
first step).
(From OE-Core rev: 24a888ddd04e44f8a069364bfbde06871ad33ae8)
(From OE-Core rev: b9509a02c4dae0fabbba730d3311bca29e353e4f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.19 and 4.1 meta SRCREVs to pull in the coretemp
configuration values.
Partial fix for [YOCTO #8107].
(From OE-Core rev: 4511961afca854d8006c0d058f46f8ba46f277c4)
(From OE-Core rev: 39eff54fec9a90c9a5f49d8beb643ec9152add2e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the recent changes to the kernel meta data handling and the
removal of BSP branches, we need to shuffle some patches around to
match.
This prevents patches from being applied twice, and the qemuarm BSP
can be configured for preempt-rt.
[YOCTO: #8122]
(From OE-Core rev: b6b7a80440521a8e82cfe6c56dddedf061de6208)
(From OE-Core rev: f18b19e1be0b84d431328f87ec4a694ac1415469)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove backport patch filemode-fix.patch.
* Update --with-kernel=${STAGING_DIR_HOST}/${prefix} to find kernel
headers (linux/*.h) to fix the error:
| checking kernel supports perf_events... unknown -- perf_event.h not found
| ERROR: You requested to build oprofile with '--with-kernel=/buildarea/lyang1/test_f2/tmp/work-shared/qemux86/kernel-source',
| but headers were not accessible at the given location.
| Be sure you have run the following command from within your kernel source tree:
| make headers_install INSTALL_HDR_PATH=<kernel-hdrs-install-dir>
| Then pass <kernel-hdrs-install-dir> to oprofile's '--with-kernel' configure option.
| configure: error: Unable to build oprofile. Exiting.
(From OE-Core rev: b2200152deef0aec3cd8fe55bb73d6e8fccfe159)
(From OE-Core rev: 2dff13e834dc7b67e16ee597d7f9a3efdc72d10f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a patch which updated add LDFLAGS variable to SLDFLAGS
in Makefile.
(From OE-Core rev: 6bf2743a967ede08d19f9ca1f72e36e806e92fb0)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recent commit fixed perf build failures with a change that duplicates
a fix that can be found in kernels after 4.1. Unfortunately there is a
conflict between these two fixes and we see perf build failures when
building perf in kernels that contain the fix already. The problem is
that the fix from the recipe modifies the location of .config-detected
to $(OUTPUT).config-detected. In a 4.2 kernel the location will be
changed to $(OUTPUT)$(OUTPUT).config-detected.
We change the recipe to require a space in the pattern to only change
kernel sources that do not already place file in $(OUTPUT).
The recent commit that introduced the build failure is:
commit ea9016b60b47138bc58d84a06954b44527b20a19
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Sat Jul 25 14:37:58 2015 +0100
perf: Fix config file conflict with 4.1 kernels
If you setup mutlitlibs and then:
bitbake perf libb32-perf
bitbake perf libb32-perf -c cleansstate
bitbake perf libb32-perf
you will see races where the two builds get confused about which directory
they should be using and they corrupt each other.
The issue is that .config-detected is created in ${S}, not $(OUTPUT).
We can fix this by moving the file to $(OUTPUT).
[YCOTO #8043]
(From OE-Core rev: 00608cffffb586e8d2a2075117e710113c471448)
(From OE-Core rev: 57df1ebd910e42af47a0039830a60f41a3bd29b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit in the kernel source that fixes the problem from kernel side is:
commit 642273795fa81da11290ffa90bce6ff242f2a7bb
Author: Aaro Koskinen <aaro.koskinen@nokia.com>
Date: Wed Jul 1 14:54:42 2015 +0300
perf tools: Create config.detected into OUTPUT directory
Create config.detected into OUTPUT directory instead of source
directory.
This fixes parallel builds that share the same source directory.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-1-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
(From OE-Core rev: cb8d309ff0ea0ca11edc2aae75ddd869491cb330)
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The source tarball should be listed first.
(From OE-Core rev: 3f5d6405a0f4a5de14f7aebe430160c2256bf218)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patch merged upstream and part of x32 patch merged upstream.
Refresh patches.
(From OE-Core rev: ae831faa25fa7bbe8ebff313f1ae6e862bcbe602)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With kernel commit 6c6f0f6164f [tools build: Add feature check for lzma
library], perf now performs a test for lzma and adds functionality
appropriately.
This currently is a floating dependency that will sometimes be present,
and sometimes not. The result is the following QA warning:
WARNING: QA Issue: perf rdepends on liblzma, but it isn't a build dependency? [build-deps]
By adding xz to the DEPENDS, we'll ensure that it is consistently in
place.
[YOCTO: #8045]
(From OE-Core rev: 2b7bf357e126bf272504548a4692cf764fd7f8ea)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto kernel recipes to include a named/versioned 4.1
recipe. This will be the LTSI kernel, and the 3.14 and 3.19 kernels will
be removed in subsequent commites (once reference boards have transitioned).
(From OE-Core rev: c027c1283e6444ab05f444eb5d292ec1a36b5821)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to import the following changes:
cbd4b7102668 patchme/updateme: unify meta directory handling
b65075997152 configme: standalone operation
The change of note is [configme: standalone operation], which makes the
kernel configuration script free from dependencies on other parts of the
kern-tools.
With this change, we set the stage to extend kernel configuration
fragments and auditing to arbitrary trees.
(From OE-Core rev: 17f071dea78a08648eda71829c845104338510b9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto tree has always been a combined set of kernel changes
and configuration (meta) data carried in a single tree. While this
format is effective at keeping kernel configuration and source
modifications synchronized, it isn't always obvious to developers on
how to manipulate the meta data versus the source.
With this change, we remove the meta data processing from the
kernel-yocto class and use the external meta-data repository that
has always been used to seed the linux-yocto meta branch.
After this change, linux-yocto can no longer process combined trees,
and is simplified as a result.
(From OE-Core rev: 523e4f6a6913b64453579d27a02467e14f7df42e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you setup mutlitlibs and then:
bitbake perf libb32-perf
bitbake perf libb32-perf -c cleansstate
bitbake perf libb32-perf
you will see races where the two builds get confused about which directory
they should be using and they corrupt each other.
The issue is that .config-detected is created in ${S}, not $(OUTPUT).
We can fix this by moving the file to $(OUTPUT).
[YCOTO #8043]
(From OE-Core rev: 00608cffffb586e8d2a2075117e710113c471448)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the libc-headers to match the 4.1 LTSI kernel version.
We also tweak the logic in linux-libc-headers.inc to look in the
4.x subdirectory if a 4.x kernel is specified as the header source.
(From OE-Core rev: 3143920c541b55b543b9dcc12b18af4e0e4b7ae1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove add-aarch64.patch since it is already in the source.
* Rename lttng-ust_2.6.1.bb -> lttng-ust_git.bb
(From OE-Core rev: f5b03208c0ae0f47dddec6e39712fb0f1d041ebc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run "kexec" in powerpc board, the kexec has a limit that
the kernel text and bss size must be less than 24M. But now
some kernel size exceed the limit. So we need to change the limit,
else will get the error log as below:
my_load:669: do
Could not find a free area of memory of 0x12400 bytes...
Could not find a free area of memory of 0x13000 bytes...
locate_hole failed
(From OE-Core rev: 8458910b3524eeb5164137332f60ba40247c33fa)
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the GCC's stack protection is enabled by default, the purgatory will
also be built with this option. But it makes no sense to enable this
for the purgatory code, and would cause error when we are trying to
relocate the purgatory codes because symbol like __stack_chk_fail is
unresolved. Instead of disabling this for some archs specifically,
disable it for all the archs.
(From OE-Core rev: 466b0b2c572fb3201ca415b689ce7a950b8625a7)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Rename recipe name from lttng-modules_2.6.1.bb to lttng-modules_git.bb
(From OE-Core rev: 180ce6570ba133ec5f36de3288d6ec163b54eefe)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the 3.19 SRCREVs for the following fixes:
e152349de59b drm/i915: Reset CSB read pointer in ring init
a87a6ffb3459 drm/i915/bdw: Enable execlists by default where supported
a70b2eb273ef meta: axxiaarm: add configuration fragments
(From OE-Core rev: 1b3d77195210d7d2b17c1bb8ab756053d72c7d4c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 SRCREVs for the following commits:
7534aeb01883 yaffs2: fix memory leak in mount/umount
4287412436cb MIPS: Fix build with binutils 2.24.51+
(From OE-Core rev: 370cd615ea3aa11d39e4c7303e8bca79e3ec6621)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe doesn't unpack any source, so set S to ${WORKDIR}.
(From OE-Core rev: b82d60aa19ecbe1e4fed6a1ce7077b3d6c620ef4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is because S = "${STAGING_KERNEL_DIR}".
(From OE-Core rev: 7c92e64834af8f578b5cfc3cfe33c13bb8a89754)
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix timer calculation error in the lttng-tools/lttng-ust
(From OE-Core rev: 780a590cf2f0604435c05445d02c342e3387497f)
Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current kernel supports WERROR now, and there is no Werror in
tools/perf/Makefile, remove both sed commands.
(From OE-Core rev: 664508e6307903fdc3054ca84d37f16718c41ede)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixed the bug https://bugs.lttng.org/issues/790
(From OE-Core rev: 8152bcadba8581f75822b75e13c2a43dd6464cd3)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lttng-modules Makefile allows us to specify the kernel we're
building against via the KERNELDIR variable on the build command line.
Use that and drop the patch (which tends to need updating whenever the
upstream Makefile changes).
(From OE-Core rev: cc6f6f96b668f7ef3db0f83c7d3585d81c569d31)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 032402438befd5906d05fed843bab9520bf7fc3e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a798e98a3e95f896f5cf30a547c56aaf5526bf33)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the linux-yocto SRCREVs to integrate fixes for the h/w reference
BSPs to the 3.19 kernel.
(From OE-Core rev: 4c992854414360a10e1b452c9a776cbd993dee1f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 01c7a7c013c4ee56f06fb7b5ab683066d8cb62f8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pull out the compilation of the DTB blobs right after the kernel's
own do_compile function finishes. This makes them available just in
time for the kernel image construction functions.
(From OE-Core rev: 86b3f29f93e3f87903668ea317c6bd97be4cdf62)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.19 kernel SRCREVs for the following commits:
NFC:
727cfce45077 meta: intel-common: enable generic NFC support
f3e890065903 meta: features/nfc: add generic configuration for NFC support
Braswell:
d3c0b958e688 drm/i915: New offset for reading frequencies on CHV.
dac6babbba62 drm/i915/chv: Populate total EU count on Cherryview
Axxia:
c706cb356dea arch/arm/axxia: Remove the axxia zImage.fm build
45a1aaacf6cb drivers/hwmon: Remove adt75 redundant driver
7203ee166c01 arch/arm/mach-axxia: Fixed L2 power up failure
a1541e9f0a4c kernel/irq/manage.c: Fix irq_set_affinity to allow use with buslocks
d42c0bd1c8be arch/arm/mach-axxia: Reverse checkpatch compatibility
5dbd07431a7a arch/arm/mach-axxia: changed affinity parameter to cpu
23e4ebc66acb char: hwrng: AXXIA TRNG driver added for AXM55xx
61eb3c8ee1d7 arch/arm/mach-axxia: Updated Axxia 55xx PCIe driver to use correct Doorbell interrupt IRQs
b03e0655094a AXM55xx RapidIO : Added support for Device revision and link down Monitor.
7577ad26cf73 rionet: Fix the corruption of tx_cnt during Transmit.
07fd2163ae56 arch/arm/mach-axxia: fixed NO SMP
c9371e98cc80 arch/arm/mach-axxia: fixed compiler warning
0a814fe7e747 arch/arm/mach-axxia: Updated PCIe driver doorbell support
cd3d9b46bea4 misc: lsi-ncr: Only use AMP lock on PPC platforms.
826c600c6ad6 fs: vmfs: Use generic mmap function
e2d0047cb106 arch/arm/mach-axxia: Removed axxia_circular_queue
f1ff06eaabed ARM: axxia: Add cluster and L2 power off in hotplug
b98711344263 ARM: irq: Return error when set_affinity is called from hotplug
9fd9306a30ae arch/arm/mach-axxia: Enable L3
68989d446582 Revert "arch/arm/mach-axxia: Fixed affinity error on IRQ migration"
0be0ef90a887 Revert "arch/arm/mach-axxia: fixed failure to power up cluster"
1c6522a03e81 Revert "arch/arm/mach-axxia: fixed hang in preempt kernel"
ef06a68393a3 fs/vmfs: Changes to add VMFS support for axxia.
3025e9deede6 drivers/usb/host: Changes to support the axxia BSP
b128b4f0d4e8 drivers/tty: Changes to support the axxia BSP
d1b60a7e62ef drivers/hwmon: Changes made to support the axxia BSP
2899ccbf1438 drivers/spi: Changes to support the axxia BSP
8e9cff566254 drivers/rapidio/devices: Changes to support axxia BSP
3424d2ca2653 drivers/net/ethernet: Changes to support the axxia BSP
2353dc816d6b drivers/mtd: Changes to support the axxia BSP
4b5fa2bf86cf drivers/misc: Changes made to support axxia BSP
8a5bd53ec241 drivers/i2c: Changes to support axxia BSP
02bfe1548d1a arch/arm/drivers/edac: Changes to support axxia BSP
2431db7c0c90 arch/arm/drivers/dma: Changes to support the axxia BSP
61fa3f268d5c arch/arm: arm changes to support the axxia BSP
22e0fb7be665 arch/arm/mach-axxia: add power management support
5cab63c5a1f2 arch/arm/mach-axxia: kernel files to support the mach-axxia
1336aba51616 arch/arm/boot: Changes to support the axxia BSP
97324fa920cb arch/arm/boot/dts: Files added to support axxia 5500 board
(From OE-Core rev: b74dafa8a3aad069140978420c535c18e89a964b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit to remove a ATA configuration warning:
common-pc-drivers: Enable CONFIG_ATA_BMDMA
Enabling the ATA_BMDMA re-enables ATA_PIIX which was getting
disabled
Signed-off-by: Saul Wold <sgw@linux.intel.com>
And the following to fix the ARM64 gcc5 boot:
arm64: psci: move psci firmware calls out of line
An arm64 allmodconfig fails to build with GCC 5 due to __asmeq
assertions in the PSCI firmware calling code firing due to mcount
preambles breaking our assumptions about register allocation of
function
arguments:
/tmp/ccDqJsJ6.s: Assembler messages:
/tmp/ccDqJsJ6.s:60: Error: .err encountered
/tmp/ccDqJsJ6.s:61: Error: .err encountered
/tmp/ccDqJsJ6.s:62: Error: .err encountered
/tmp/ccDqJsJ6.s:99: Error: .err encountered
/tmp/ccDqJsJ6.s💯 Error: .err encountered
/tmp/ccDqJsJ6.s:101: Error: .err encountered
This patch fixes the issue by moving the PSCI calls out-of-line into
their own assembly files, which are safe from the compiler's
meddling
fingers.
Reported-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Armin Kuter <akuster@mvista.com>
(From OE-Core rev: 3977a70c197bf0d853ea9eb01f2185ae2c75ca4f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.19 kernel SRCREVs to integrate the following Braswell
changes:
374b5d0e09ea drm/i915: Only wait for required lanes in vlv_wait_port_ready()
fca99e8ee111 Revert "drm/i915: Hack to tie both common lanes together on chv"
00682f31b612 drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
654b1a4497c5 drm/i915: Implement chv display PHY lane stagger setup
(From OE-Core rev: 211b631b0d7bf4df3152f4d8d626d798d023d512)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 SRCREVs to integrate the latest round of cavium
support patches, as well as configuration backports from 3.19.
(From OE-Core rev: df552f18cf9852e0f04780399b78605c8085d935)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a build issue with the 3.19.5 kernel where the regmap prototypes
have changed. The patch is rebased do to changes in the new version of the
Makefile.
[YOCTO #7737]
(From OE-Core rev: 787fde133c6b50c5df6ce8f90b2906b7955b41e4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when rebuild:
| NOTE: make prefix=/usr bindir_relative=bin libdir=lib NO_PYTHON=1 gui clean
| make: *** No rule to make target `sysroots/x86_64-linux/usr/lib/i586-poky-linux/gcc/i586-poky-linux/4.9.2/include/stddef.h', needed by `event-parse.o'. Stop.
| ERROR: oe_runmake failed
(From OE-Core rev: 6cb0e401f0bfc962eb9f57988fd93f0b0d43c79b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we have DEPENDS = "virtual/kernel" is means that the kernel module
depends on the kernel's do_populate_sysroot task. This is not entirely
desireable since that depends on do_install which depends on
do_compile_kernelmodules and so on. In a situation where rm_work in involved
this can cause some pretty length build cycles after the kernel workdir
has been cleaned up by rm_work.
As well as removing this, take the opportunity to clean up duplicated
dependency lines, tweak the dependency of make_scripts for the same
reason and generally try and make things more readable.
(From OE-Core rev: a641247d262971db2d44815c5a668e7e50bdaf4f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to import the following fix:
mips: define cpu_has_saa in common features include
To avoid build failures such as the following on non-cavium
platforms:
| arch/mips/include/asm/atomic.h: In function 'atomic_add':
| arch/mips/include/asm/atomic.h:52:6: error: 'cpu_has_saa'
| undeclared (first use in this function)
| if (cpu_has_saa) {
| ^
We define a disabled cpu_has_saa unless the machine specific feature
overrides define a value.
(From OE-Core rev: b2f786ca319714bd41d6f9e7ba9efaa8a6d412ab)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to include the following commits:
a4d0c407cced dmaengine: dw: don't handle interrupt when dmaengine is not used
e92b2ce791b2 dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
931304a6567e dmaengine: dw: provide DMA capabilities
468bad4f7a6f dmaengine: dw: Split device_control
b4afd7710db7 i2c: i801: Use managed pcim_* PCI device initialization and reservation
d81a8a11ecba i2c: i801: Remove pci_enable_device() call from i801_resume()
40e18604e70c i2c: i801: Use managed devm_* memory and irq allocation
b54f65dbe57b i2c: i801: Remove i801_driver forward declaration
e95740d4d079 i2c: i801: Don't break user-visible strings
423e98721e04 ACPI: Introduce has_acpi_companion()
291f620dc052 i2c: designware: Suppress error message if platform_get_irq() < 0
cf5ff51a8e3f i2c: designware-pci: no need to provide clk_khz
4f583ce420d3 i2c: designware-pci: remove Moorestown support
e000c549c9d8 i2c: designware: Add Intel Baytrail PMIC I2C bus support
7ffbd9ca19a7 i2c: designware: fixup return handling of wait_for_completion_timeout
5758d5a1df32 i2c: designware: Do not calculate SCL timing parameters needlessly
2f58fcae92db i2c: designware: Add i2c bus locking support
84a73e51e900 i2c: designware: use {readl|writel}_relaxed instead of readl/writel
f672bb8424e6 serial: 8250_dw: Fix get_mctrl behaviour
91bd64585489 serial: 8250: add support for ACPI-probed serial port for X-Gene platform
1190cba71f09 serial:8250:8250_pci: delete unneeded quirk entries
6405a4b71451 serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S
0a1a31bbbc19 serial: 8250_pci: remove one useless explicit type conversion
4edc52a55f82 intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
934f85e8bfdb x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug
c6a3440252a8 ACPI / LPSS: check the result of ioremap()
6aacc0c931b7 pinctrl: update direction_output function of cherryview driver
cb4a43a2177d pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOs
0df22c007ce1 pinctrl: intel: drop owner assignment from platform_drivers
07b16f04700b pinctrl: cherryview: Save and restore pin configs over system sleep
e8e5cfffa231 pinctrl: baytrail: Save pin context over system sleep
04cb3cc0ff21 pinctrl: baytrail: Rework interrupt handling
4cac25d2574d pinctrl: baytrail: Clear interrupt triggering from pins that are in GPIO mode
eacab9ab234a pinctrl: baytrail: Relax GPIO request rules
(From OE-Core rev: d2dd36bafdef7b0424041f5369706b9152ea13da)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way that perf detects features has changed/moved via commit e6c76d620
[perf build: Move feature checks code under tools/build].
This code movement resulted in the definition of CC being dropped, and
in turn the passing of --sysroot not part of the build.
This results in feature tests failing with errors such as:
In file included from test-pthread-attr-setaffinity-np.c:1:0:
sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.9.2/include/stdint.h:9:26:
fatal error: stdint.h: No such file or directory
# include_next <stdint.h>
^
compilation terminated.
While the fix is going upstream, we can modify the perf recipe to add
the definition of CC into the Makefile, and we'll continue to work on
patched and unpatched kernels.
Upstream-status: Pending
(From OE-Core rev: 46f842039422aa35f62b03f11b648c02980ea1b1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the configuration for the common x86 platforms to always
include core bluetooth support.
(From OE-Core rev: 388de1bfa1de1086d500aa8b2d4ece69cce6d5f6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker refreshed the 3.14-rt support to the latest rt stable
content.
With these SRCREV bumps, the 3.14 LTSI kernel is now at -rt37.
91dc6afcecd4 rt: bump localversion from 32 to 37
e69f7430b620 rt: bump localversion to 32
c060800318e4 netpoll: guard the access to dev->npinfo with rcu_read_lock/unlock_bh() for CONFIG_PREEMPT_RT_FULL=y
833c21beba79 Revert "timers: do not raise softirq unconditionally"
6c9337ff352c fs,btrfs: fix rt deadlock on extent_buffer->lock
2d542663bfb9 staging: Mark rtl8821ae as broken
988e4701df83 timers: Reduce future __run_timers() latency for first add to empty list
2549262883c5 timers: Reduce future __run_timers() latency for newly emptied list
073fac19d3e4 timers: Reduce __run_timers() latency for empty list
25ca11173e64 timers: Track total number of timers in list
277a4ae36580 fs/aio: simple simple work
7b2ebc4e590b lockdep: selftest: fix warnings due to missing PREEMPT_RT conditionals
9afc01954298 thermal: Defer thermal wakups to threads
84d35d05b236 locking: ww_mutex: fix ww_mutex vs self-deadlock
f0c8e4837a51 Revert "rwsem-rt: Do not allow readers to nest"
df0d51ecf13f sunrpc: make svc_xprt_do_enqueue() use get_cpu_light()
f069e339ca02 work-simple: Simple work queue implemenation
0d9e6cbead39 scheduling while atomic in cgroup code
8405cdab8c2c sas-ata/isci: dont't disable interrupts in qc_issue handler
dfb7e1ab2427 mips: rt: Replace pagefault_* to raw version
ddbe4584a13b ARM: cmpxchg: define __HAVE_ARCH_CMPXCHG for armv6 and later
607f2a27c2ee arm/futex: disable preemption during futex_atomic_cmpxchg_inatomic()
58de8f60159f ARM: enable irq in translation/section permission fault handlers
62d90b45607c x86: UV: raw_spinlock conversion
e8d164191f65 rtmutex: enable deadlock detection in ww_mutex_lock functions
9612daf936db rt,locking: fix __ww_mutex_lock_interruptible() lockdep annotation
47915a120d41 rtmutex.c: Fix incorrect waiter check
a6a68d53df5f locking/rt-mutex: avoid a NULL pointer dereference on deadlock
fb2c256f8a91 futex: Simplify futex_lock_pi_atomic() and make it more robust
7e59d4d5900e futex: Split out the first waiter attachment from lookup_pi_state()
45ccc2e3f25f futex: Split out the waiter check from lookup_pi_state()
c5133997a345 futex: Use futex_top_waiter() in lookup_pi_state()
4726c8b47964 futex: Make unlock_pi more robust
b55c2c7782ee rtmutex: Avoid pointless requeueing in the deadlock detection chain walk
ff7cfbb757d4 rtmutex: Cleanup deadlock detector debug logic
e80ba665fa71 rtmutex: Confine deadlock logic to futex
7a9e7c37ccf4 rtmutex: Simplify remove_waiter()
d664c14c1db3 rtmutex: Document pi chain walk
64bcb809c720 rtmutex: Clarify the boost/deboost part
02323ee362c4 rtmutex: No need to keep task ref for lock owner check
063983fb0497 rtmutex: Simplify and document try_to_take_rtmutex()
f87319b715f1 rtmutex: Simplify rtmutex_slowtrylock()
de9723ae23f9 gpio: omap: use raw locks for locking
705ad635f56a rt: bump localversion from 22 to 31
22b5a5cda73a mm/page_alloc: fixup warning from stable merges to -rt
(From OE-Core rev: aa1900021aa05ce1d5b8e607de094ae7cf3fcd10)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An alternative approach with NO_GENERIC_LICENSE has been added
in license.bbclass to allow copying non-generic license,
add it for all firmware licenses.
(From OE-Core rev: f2e92c741bde70753163afe3839ff8d35ae5380e)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is aready in the source.
(From OE-Core rev: 4ac3e70f8f39dc6b585e0acb3679d4137f60b296)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Confirmed with the author Qi, it isn't needed.
(From OE-Core rev: 6ee6c39df4dea2dcd99cccad771e1326465e96dd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible that recipe specific tasks, or build processes drop
files into the kernel source directory. These files can cause problems
with the meta data detection in the kern-tools.
With this change, we have a single unified meta data detection routine,
that logs the result in a new file ".metadir", which subsequent scripts
can find, and use, thereby avoid repeating the same check many times.
We also enhance the check to look for a sentinel file in a proper meta
directory, to avoid false positives when an unexpected kernel process
leaves an uncommitted directory in the kernel dir.
[YOCTO: #7441]
(From OE-Core rev: 6b04ae2c0439b83c0445fd1b8cb9cba5cee6b9bc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto.inc may remove the meta dir:
do_install_append(){
if [ -n "${KMETA}" ]; then
rm -rf ${STAGING_KERNEL_DIR}/${KMETA}
fi
}
Which may cause the error:
[snip]
find: `./meta/cfg/kernel-cache/bsp/altera-socfpga/0073-FogBugz-116676-Align-clk.c-with-kernel.org.patch': No such file or directory
find: `./meta/cfg/kernel-cache/bsp/altera-socfpga/0047-FogBugz-90657-Fix-SD-MMC-driver-for-VT.patch': No such file or directory
find: `./meta/cfg/kernel-cache/bsp/altera-socfpga/0006-spi-qspi-cadence-Add-spi-and-qspi-driver.patch': No such file or directory
[snip]
cpio: ./meta/scripts/kgit-config-cleaner: Cannot stat: No such file or directory
cpio: ./meta/scripts/kgit-s2q: Cannot stat: No such file or directory
cpio: ./meta/scripts/kgit-clean: Cannot stat: No such file or directory
[snip]
(From OE-Core rev: 0866086c6a9d9f518388f2962db784ab15d49330)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the linux-yocto 3.19 SRCREVs to integrate the 3.19.5 korg
stable updates, as well as the following meta data changes:
205aca0c1241 meta: intel-common: Enable USB-based Bluetooth hardware
b6a810e8e808 meta: features/bluetooth: add support for USB Bluetooth hardware
767f3fa34680 common-pc-drivers: Add CONFIG_EEPROM_AT24
e308b2c52519 intel-core*: Add Braswell soc support
8c1c74d5052b braswell: Add features/soc/braswell
(From OE-Core rev: 2b163b8bbe8363e24f951ec507691ac692bc80b0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will ensure that compiler does not initialize the definitions
in header files
Change-Id: I1076201c667f96707c320a51a77d4a70e22df750
(From OE-Core rev: 2e9a4198fc9a9fcc78eddb6cd5c2ad51a2e8d3e7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove 0002-In-the-3.13-rc1-Linux-kernel-the-INIT_COMPLETION-mac.patch
since it was a backported patch.
* Updated 0001-Add-the-compile-and-install-rules-for-cryptodev-test.patch.
(From OE-Core rev: 9347311ca444c3128653c96f9f2845713c646fa7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each firmware has their own license, it was a kind of a mess to
leave the license as Proprietary and we got a lot warnings like:
WARNING: The license listed Firmware-atheros_firmware was not in the
licenses collected for linux-firmware
To fix this and make it more clear:
- Fix some incorrect license names.
- Add all license files into common-licenses in previous commit.
- Add all licenses and their md5 values in alphabetical order.
- Add pn-*-license to split up per firmware package and pn-license for others.
- Re-order the codes for each split-out firmware as:
LICENSE_*, FILES_*, RDEPENDS_*
[YOCTO #7539]
(From OE-Core rev: 1ee083da0730408fffdbbf5f29abc299c0e61be9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following patches are rebased.
-- Change-to-calling-bswap_-instead-of-htobe-and-be-toh.patch
-- avoid_parallel_tests.patch
The ptest part of kmod is removed because new version of kmod port all tests to
use modules from module-playground instead of copying prebuilt modules to the
repository. So, we cannot use ptest as before. Remove it so that kmod can build
successfully.
(From OE-Core rev: f80d136bdd578468035a88125fa1b84973fd912b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add autoconf test for detect when build is x32 ABI this enables to
test into purgatory Makefile to avoid use -mcmodel=large flag in CC.
Add ELFCLASS read and syscall number into kexec, see patch.
[YOCTO #7419]
(From OE-Core rev: 7b75430c2e3ffedb9ef4198fabf259b757b9ce5a)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel_configme task was added twice (once in the .bbclass, one in a .inc)
with different ordering constraints.
Change this to be just one definition in the bbclass with the stronger ordering
constraints.
(From OE-Core rev: b9646b9d31c3e0c70337a8c10ebfc087a0e2b829)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autobuilder failed like this:
temp/run.do_kernel_metadata.25242: line 165: createme: command not found
createme is provided by kern-tools-native. do_patch has a dependency on
kern-tools-native, but do_kernel_metadata runs before do_patch. So move the
dependency from do_patch to do_kernel_metadata, moving the statement from the
.inc to the class so it's alongside the task definition.
[ YOCTO #7531 ]
(From OE-Core rev: 4a0371847ff0c30d9b60db63559d89dddfcb009f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.19 meta branch to include the following configuration
change to deal with kernel configuration audit warnings:
9e70b482d377 romley: remove common video and media config items
8a4e096759ad intel-common: remove eg20t from common config
c2f5ab15620c drm-cdvpvr: Add STAGING_MEDIA
ac4693c1db39 media: Prefer modules(m) to yes(y) and update for 3.19 Kernel
(From OE-Core rev: aa57c02e12a3ecd26eff410f70de28013aed2e00)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 SRCREVs to import the v3.14.36 korg stable changes and
configuration changes to the meta branch.
(From OE-Core rev: 3ca86a30bcbdf59753b7ad611d5e307b65d3c0f6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.19 SRCREVs to pick up the korg 3.19.2 release, as well
as the following meta data changes:
ed82e1ac3196 features: soc: fix typo in baytrail.cfg
76bc151242d7 tiny.cfg: Enable BINFMT_SCRIPT
(From OE-Core rev: 486c40b6d9566e882c841f0cb398612ba70256e7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a patch for fix printing of time_t value that is long long int
in x32 ABI instead of long int.
[YOCTO #7423]
(From OE-Core rev: 194f0be44fa37605d0b5897138848fa378593d62)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perf has a dependency on bash in its utilities, which generate the
following warning:
WARNING: QA Issue: perf requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
Since perf is not installed on extremely small systems, we just add
bash to the RDEPENDS, rather than modifying scripts or removing content.
[YOCTO: #7445]
(From OE-Core rev: 6f39aae20d88a2d764c3a85617cd36b81af804f1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest and greatest -stable release for the 3.19 series.
(From OE-Core rev: 1e60b5216a89a34eba7749244eeb53d5d12864eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When fixing a kernel configuration warning, it is often necessary to
modify the kernel's meta-data and re-run the tools to update and
re-audit the config. This implies that the patch, config and audit
steps are run multiple times.
The tools had a bug that would incorrectly restore old meta-data
versus using updated configuration. Updating the kern-tools SRCREV
to fix the issue.
(From OE-Core rev: b903559daa847d2c56bf729fc5ca885113d0eecc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: b9a97b56400d156bc670d933323d0e28ffb17960)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applying the existing ARM patch for armeb makes it work.
(From OE-Core rev: 33a576a85b2d37dafadabf3f1472cd3c3b42f6b6)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 2d9763a1c8.
There are a few parallel issues:
1)
../rbtree.o: error adding symbols: Invalid operation
collect2: error: ld returned 1 exit status
Makefile:42: recipe for target 'btt' failed
2)
git/blkiomon.c:216: undefined reference to `rb_insert_color'
collect2: error: ld returned 1 exit status
Makefile:27: recipe for target 'blkparse' failed
3)
ld: rbtree.o: invalid string offset 128 >= 125 for section `.strtab'
4)
btreplay.o: file not recognized: File truncated
collect2: error: ld returned 1 exit status
btreplay/btreplay.c:47:18: fatal error: list.h: No such file or directory
(From OE-Core rev: 35bb619486d7f5721e8fa86c8744d4cea4d1746a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This prevents the "Warning: No tracing group detected" message
from lttng when there is no group 'tracing' while using lttng
on the target.
(From OE-Core rev: 8fef1e991f9ea6f0ad6110aab77bc9ab0b4e7d23)
Signed-off-by: John Mehaffey <mehaf@gedanken.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file ownership needs to be explicitly set otherwise it inherits
the user and group id of the build user.
(From OE-Core rev: 9ce5b600cb1663f8c2a625c7f7c08ab3e61b58c8)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address issues with the 3.19 kernel and the number of patches to
back port would be to great
[YOCTO #7401]
(From OE-Core rev: 7ec29a4dbcc62a928c517bd968c499e325580bfe)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the SRCREV for the following incremental improvement in patch
processing time:
kgit-meta: skip patches on non-leaf nodes
In a similar way as commit 0768d697 [kgit-meta: dont run kgit-s2q
for
non-leaf nodes], we can save even more processing time by not even
analysing and linking patches if we aren't on the leaf node of the
tree.
This early exit can save nearly 95% of the time required to "patch"
a tree when no changes are actually applied.
(From OE-Core rev: 148c78e0f5de2689de3ad9beaa9f6de618d87758)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With these SRCREV updates, we add the following support to the kernel:
The following has been verified with the branch sources:
On 68xx:
* SGMII, XAUI Packet IO interfaces.
* PCIe devices
* EHCI/OHCI USB driver
On 78XX:
* Ran LTP testsuite
* SGMII, XAUI Packet IO interfaces
* MMC driver (which covers GPIO interrupts in the driver)
* PCIe devices
* XHCI USB driver
(From OE-Core rev: c32023e75b1cd722f3fca226ec8651dc10cf9dab)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't require that a yocto custom kernel + defconfig have a full BSP
description (but of course it would be better if they did). Since this
isn't a requirement, we shouldn't alarm users by generating a BSP
description warning.
To implement this, we add a bsp audit level flag (like the one that
exists for kconfig audits), and only set it to activate in the versioned
linux-yocto recipes.
[YOCTO: #7370]
(From OE-Core rev: d2fb7fff291b83700d487be093223c1533d915ce)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the 3.19 update a 32 bit option in the 64 bit config was missed,
which results in the option being dropped (and reported as a warning):
Value requested for CONFIG_PCI_GOANY not in final ".config"
Requested value: "CONFIG_PCI_GOANY=y"
Actual value set: ""
So we split the 32bit only drivers out of the common driver include and
the problem goes away.
[YOCTO: 7354]
(From OE-Core rev: 4dc9bde20602c7565979c7ebdea1a36c7ab3f458)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
lttng-tools-2.6.0: lttng-tools-ptest rdepends on libkmod, but it isn't a build dependency? [build-deps]
lttng-tools-2.6.0: lttng-tools rdepends on libkmod, but it isn't a build dependency? [build-deps]
(From OE-Core rev: a79d489a2fa532e6f87fe3cf0b55485fb08fd72e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* refresh/cleanup the patch to apply cleanly on 2.0.9
* get rid of configure - it's autogenerated
* configure.ac: use aarch64* wildcard
(From OE-Core rev: 66457319e4050fee569aeccd1fe98fbf9f046f02)
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to version 2.5.3 to match trace-cmd.
Changes include:
- Remove kernelshark-fix-syntax-error-of-shell.patch (the syntax error
is no longer present in the new version).
- Specify bindir_relative and libdir in EXTRA_OEMAKE as in the
trace-cmd recipe so files get installed to the right place.
Additionally, remove unnecessary EXTRA_OEMAKE options.
- Fix up the do_install steps to remove the plugins directory; that
directory now lives under /usr/lib.
- Set NO_PYTHON=1 because building the ctracecmd Python module requires
swig, which is not available in oe-core.
(From OE-Core rev: 2f177644dab083bc5306bce1bf2ff2ef8851c862)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating adds new features including the very useful 'profile' option.
Changes include:
- Remove addldflags.patch (already upstream in the new version).
- Remove make-docs-optional.patch (docs are built in a separate target
in the new version).
- Update SRC_URI, SRCREV, PR, and PV in the .inc file and don't
override them in the recipe.
- Fix a typo in LIC_FILES_CHECKSUM so 'endline' is properly defined.
- Drop PR.
(From OE-Core rev: 30eba39bd3b915477c584d8bebd194446497175e)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introducing the v3.19.x recipes for the validated linux-yocto kernel.
Build, boot and sanity testing was performed on qemu for all major
architectures.
(From OE-Core rev: 329a028bec428e8dc8cf3420c6e462de2898c8aa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In accordance with the kernel release criteria we support the latest
mainline kernel + the last LSTI kernel + a development kernel.
3.19 will be introduced as the latest mainline, and 3.14 is the released
LTSI kernel, which means that we remove the 3.10 and 3.17 variants.
(From OE-Core rev: 19203a95f4b65e0a009a738fb4fc216e985a0835)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a linux-yocto style kernel is configured, a kernel configuration
audit is executed to detect common errors or issues with the config.
This output used to be visible, but was made less obvious to not alarm
users unnecessarily (since some configuration issues are acceptable).
There are some classes of configuration issue that are worth being
visible, and that is specified configuration values that do not make the
final .config. These dropped options can result in any number of runtime
failures, so flagging them at build time makes sense.
The visibility of auditing is controlled by KCONF_AUDIT_LEVEL:
0: no reporting
1: report options that are specified, but not in the final config
2: report options that are not hardware related, but set by a BSP
The default level is 1, with level 2 and above being for BSP development
only.
If these conditions are detected, warnings will be generated as follows:
WARNING: [kernel config]: specified values did not make it into the
kernel's final configuration:
Value requested for CONFIG_SND_PCSP not in final ".config"
Requested value: "CONFIG_SND_PCSP=y"
Actual value set: ""
or
WARNING: [kernel config]: BSP specified non-hw configuration:
CONFIG_BLOCK
CONFIG_CFG80211_WEXT
CONFIG_CORDIC
CONFIG_CRC8
CONFIG_EFIVAR_FS
CONFIG_EFI_PARTITION
CONFIG_NET
CONFIG_NETDEVICES
CONFIG_PARTITION_ADVANCED
CONFIG_WEXT_CORE
CONFIG_WEXT_PROC
CONFIG_WIRELESS
At this point thse are only a warnings, since there needs to be time for
layers and configuration fragments to be validated against this new
check.
[YOCTO: #6943]
(From OE-Core rev: ad4d59495194b37bc510e9891bd14c0a2ac30dba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the libc-headers now that the kernel has released.
(From OE-Core rev: b3721560fe523c144690ebfeb203b3735d0f6843)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I used a for loop to build these packages more than 520 times, these
recipes never failed.
(From OE-Core rev: 7957c5bc2771a763d26e50e716733c6335cef3c2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 521ec7e979409f213cd98ed6015fdba2fce89243)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust the patch since it was partially applied upstream (in
a different form) but not completely since the ppc specific
part was not applied.
(From OE-Core rev: d397ba39e6a5a7d42641d489917033c779816a1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV to import the following kern-tools patch:
kgit-meta: always clear series file on branch transitions
This was triggered by the patch optimization changes, that no longer
run do_patch if a leaf/final branch is not being processed.
Without this change, invalid patches, or already applied patches in
an existig series file will be re-used which leads to missing files,
or patch errors.
(From OE-Core rev: 762cf3beea5ff374e2ddf491e541f07129443af3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The merge of the 3.14 -stable series triggered a build failure in the
32 bit mips builds.
Updating the SRCREVs to import the fix for the issue.
(From OE-Core rev: 234b4feef24ffe0cea9b6d88d9c51a05ee63db9e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV for the following commits:
4822d22b65c2 kgit-meta: dont run kgit-s2q for non-leaf nodes
3e3de1b9cdec createme: remove meta branch checks
With these, we save 10 seconds on the average patch phase, and
significantly more if very long patch queues are used.
(From OE-Core rev: 04e600d933878f3d104cf734d437e6baffb983d8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix build issues against the v3.19 kernel, we can safely update to
the lttng 2.6 stable branches.
This allows us to drop two backported patches that are already part of
this update.
(From OE-Core rev: 76668418a63d4c0618c63bd9d13970df35e736eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the following commits to add basic octeon III support to the
3.14 linux-yocto kernel:
1e0bbd1dd68e MIPS:OCTEON: More OCTEONIII support
f51a5843ee2d MIPS: Octeon: CVMSEG LM loads may cause dcache parity errors
58bcba842781 MIPS: Octeon: Implement the core-16057 workaround
ba5a219685e8 MIPS Override assembler ISA for kernel FPU instruction.
7759a0511965 MIPS donot build fast TLB refill handler with 32-bit kernels.
3f51e46ff641 MIPS Add minimal support for OCTEON3 to c-r4k.c
bbde024d903a MIPS Add function get ebase cpunum
9f18310679cb MIPS OCTEON Enable use of FPU
d24496ee8fc8 MIPS OCTEON Add OCTEON3 to get cpu type
(From OE-Core rev: 451142572f156ff0e88943931b924bfb0d9c30ce)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg stable version.
(From OE-Core rev: 4d342c2531bbb33c9101dcd7a669a620c8cf6917)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg -stable release for 3.14.
(From OE-Core rev: a6a64ee87182c6fa62117e68fafc4ec25ceefc0b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The named release was still using the -dev git repo which did not contain
the SRCREV referenced in the numbered/named version.
(From OE-Core rev: b4f2f39ce0f4690ed51d14d1034b9f5e21c0f5a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL http://www.latencytop.org/download/latencytop-0.5.tar.gz, attempting MIRRORS if available
Its homepage is also down, but can't find a proper one atm.
(From OE-Core rev: 1f6a21b76210efa8d323014263d5656c61131803)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: QA Issue: perf rdepends on numactl, but it isn't a build dependency? [build-deps]
The numactl is in meta-oe.
(From OE-Core rev: 175d6b4e598f78dfa17c101a36a82c0951615b7a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using populate_sysroot for this data was a nice idea but flawed as it
doesn't work in multilib builds. Instead we can use PKGDATA_DIR since
this is consistent over multilib builds. It also turns out to be
slightly neater code too. Hopefully this resolves the problem once and
for all.
(From OE-Core rev: 6cccae3ca54c1177a1d91d23c3e151d74e735ee9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Perf.bb (among others) requires access to the kernel source, so have linux-dummy fake that as well. As before, perf will fail to build, but there are use cases where this patch is needed. For example a perf.bbappend that will always build it from the debian linux-tools tarball.
Using linux-dummy is still a bad, bad idea, but it shouldn't start breaking existing use cases.
(From OE-Core rev: 56142f002046d319a2cdc326ea8f8c0892f3061f)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #7230]
In certain system configurations TRANSLATED_TARGET_ARCH will not
expand in the right order for gcc-cross-candian-mips64n32 to be
generated properly.
This will cause SDKs to fail to generate properly.
Changing the global definition of TRANSLATED_TARGET_ARCH always
expands the ABIEXTENSION, which causes the OVERRIDES to pick it up
as well. This effectively defines a new class of overrides for the 'n32'.
The side effect is that we need to duplicate some mips64 overrides, and
redefine others that were previously 'n32' or 'mips64' exclusive to have
the correct semantics.
(From OE-Core rev: 4b3a2b703b20583bd107f00a297d972e9bfb514a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
debug and logging will make kmod and its library bigger than expected
due many strings in the resulting binaries. While these are useful for
development, they are of no use for deployment.
With them enabled kmod is 154Kb, libkmod is 99Kb. Disabling reduces to
kmod 139Kb (10%) and libkmod 83Kb (19%) on i586 stripped.
(From OE-Core rev: 907514c1b2d07231eb6ec63d21ad5dc25e731b29)
Signed-off-by: Bruno Bottazzini <bruno.bottazzini@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the rpm package backend enabled, running:
bitbake <image>
bitbake virtual/kernel -c clean
bitbake <image> -c rootfs -f
results in an image with incorrect kernel module dependency information.
The problem is that the System.map and kernel-abiversion files are needed
for depmod and after the recent kernel changes, these are no longer in
sstate.
Its reasonable to require the kernel to unpack/build if you're
about to build a module against it. It is not reasonable to require this
just to build a rootfs.
Therefore stash the needed files specifically for depmod.
Also fix some STAGING_KERNEL_DIR references which were incorrect, found
whilst sorting through his change.
(From OE-Core rev: b851504dcf5e147c9efb1c7b6a4d22c1a1a87cd7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix for rebuilding error:
make[3]: *** No rule to make target `/path/to/sysroots/qemuarm64/usr/src/kernel/tools/lib/traceevent//trace-seq.c',
needed by `.trace-seq.d'. Stop.
make[2]: *** [sub-make] Error 2
(From OE-Core rev: 9dafa571ed0a40d21a886dec7704c31150b21942)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It works well now, and bump the PR to avoid:
configure: error: source directory already configured; run "make distclean" there first
(From OE-Core rev: 5fccfd0f0a9dd4dca96389f5d856d3fab21745e2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And bump the PR to avoid:
configure: error: source directory already configured; run "make distclean" there first
(From OE-Core rev: c450175470e66e58095886a9b027a4a77fff38aa)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Seed the xsltproc detection with "not found" to avoid determinism races with the
documentation which doesn't build correctly with our xsltproc.
(From OE-Core rev: 7bca8658c55223bf4b6f691e4a66a18675a1f762)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since virtual/kernel do_compile modifies ${B}, we need to wait for
do_compile to copy everything across in order to ensure a deterministic
file set.
Currently, we race against the build and can see .debug directories, and
the do_compile dependency we will always see them. Add .debug to the
find path pruning.
(From OE-Core rev: 20dd877d36e85911b57bec079cf978a577fba866)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It hasn't actually been being enabled anyway: 'Disabling post unwind,
no support found.'. For now, turn it off because of [YOCTO #7129].
Fixes [YOCTO #7129].
(From OE-Core rev: d8c839afa96925b27909eb5a7b89ee83c87924bc)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perf can use either libdw or libunwind dwarf unwinders, or neither.
The perf-libunwind feature implies that if disabled, neither should be
used, so have it disable both libdw and libunwind DWARF unwinders if
disabled.
This fixes [YOCTO #7129].
(From OE-Core rev: 868dd446fa2732858813e96dd8f3f64b2a9ec339)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 3b3f7e785e279 [kernel: Rearrange for 1.8] began the process of
moving the kernel source and build artefacts out of sstate control and
into a shared location.
This changed triggered some workflow issues, as well as bugs related
to the kernel source containing build output, and hence being dirty and
breaking kernel rebuilds.
To solve these issues, and to make it clear that the kernel is not under
sstate control, we move the source and build outputs to:
work-shared/MACHINE/kernel-source
work-shared/MACHINE/kernel-build-artifacts
Where kernel-build-artifacts is the kernel build output and
kernel-source is kept "pristine". The build-artifacts contain everything
that is required to build external modules against the kernel source,
and includes the defconfig, the kernel-abiversion, System.map files and
output from "make scripts".
External module builds should either pass O= on the command line, or
set KBUILD_OUTPUT to point to the build-artifacts. module-base.bbclass
takes care of setting KBUILD_OUTPUT, so most existing external module
recipes are transparently adapted to the new source/build layout.
recipes that depend on the kernel source must have a depedency on the
do_shared_workdir task:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
With this dependency added, the STAGING_KERNEL_DIR will be populated and
available to the rest of the build.
(From OE-Core rev: 6a1ff0e7eacef595738f2fed086986fd622ec32a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update the source code to the 2.5.2 version and also brings two
fixes from stable-2.5 branch. The update also allowed the removal of
some already applied patches from the metadata.
Doing this update, it fixes following build error:
,----
| make[1]: Entering directory `.../build-framebuffer/tmp/sysroots/imx23evk/usr/src/kernel'
|
| ERROR: Kernel configuration is invalid.
| include/generated/autoconf.h or include/config/auto.conf are missing.
| Run 'make oldconfig && make prepare' on kernel src to fix it.
|
| Building modules, stage 2.
| ./scripts/Makefile.modpost:42: include/config/auto.conf: No such file or directory
| make[2]: *** No rule to make target `include/config/auto.conf'. Stop.
| make[1]: *** [modules] Error 2
| make[1]: Leaving directory `.../build-framebuffer/tmp/sysroots/imx23evk/usr/src/kernel'
| make: *** [default] Error 2
`----
(From OE-Core rev: e575ab81f0cf145503c4afd9ce62040721a526b2)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-Add-missing-O_CLOEXEC-in-kmod_module_get_size.patch is dropped
as it's in the new version.
Change-to-calling-bswap_-instead-of-htobe-and-be-toh.patch is modified
to match the new version.
License chesum is changed but it is confirmed that the license information
is not chagned.
(From OE-Core rev: 234d61aa89deecf909938bfba39601f79bdcfaee)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-yocto is updated to pass the sysroot path to the compiler when necessary.
linux-yocto_ver.bb are updated to reference the correct linux-yocto branchs and
SRCREVs.
(From OE-Core rev: af67a2938e007e08fd1d082a0932c78deaedb527)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add patch from
https://fedorapeople.org/~hrw/aarch64/for-fedora/kexec-aarch64.patch
to add aarch64 support for kexec-tools.
(From OE-Core rev: 342ef3196bd754866bbdb54d538804ab71926553)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add aarch64 architecture to liburcu and lttng-ust.
Internally it is treated the same as "arm".
(From OE-Core rev: 9546d5a5078e34966061d42233678faaa3041d41)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add COMPATIBLE_HOST to the recipe and prohibit
building for aarch64 and aarch64_be.
(From OE-Core rev: 69eff591cc13d22c61679fbda9bc768561114eef)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make aarch aarch64 kernel depend on libgcc.
In arch/arm64/Makefile, it adds LIBGCC to libs-y:
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
libs-y += $(LIBGCC)
In file Makefile in top directory, libs-y is assigned to to var
KBUILD_VMLINUX_MAIN. It uses script link-vmlinux.sh to link vmlinux.o,
and when execute function vmlinux_link() in link-vmlinux.sh,
KBUILD_VMLINUX_MAIN is passed to ${LD}.
If build without libgcc, the value of LIBGCC is just libgcc.a without
parent directory. linux-yocto fails to build:
| LD vmlinux.o
| aarch64-poky-linux-ld.bfd: cannot find libgcc.a: No such file or directory
Add libgcc to aarch64 kernel dependency.
(From OE-Core rev: 69ab638adcd8d30f35bb863254d9b112ad12b925)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tthe kernel populate_sysroot can come from sstate, we need the full
source here. We therefore depend on the configure task which isn't
covered by sstate to ensure we get the right set of files.
(From OE-Core rev: c3598cf720e04ab27ab5d2817c09f2496b677560)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_install for kernel-devsrc can race against do_make_scripts from
module-base.bbclass. Since there is a lock there to guard against concurrency
already, we can just use it here to avoid a race.
Ultimately, this can all likely be much more streamlined but this resolves
the immediate build failures.
(From OE-Core rev: 17fb28156737e803b36d7b3fd59d092fe152d126)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolve kernel module build failures for qemuppc by including crtsaves.o.
I'm not particularly happy to be doing this, it should perhaps be contained
in the kernel-dev package. Until the overlap between kernel-devsrc and
kernel-dev is resolved, this at least removed the regressions.
(From OE-Core rev: 5fa888894384eff18df77d0a5aaa007eba1406c8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a "normal" recipe, mulitlib would try and extend it for multilibs.
By inheriting module-base, we can avoid this since we now look more
'kernel' like.
(From OE-Core rev: 59f08c9144e6f81906154cb306db6fee14dc42ca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst we don't usually take linux-libc-headers point release, 3.17.3
fixes a userspace header issue which caused gdb to fail to build on
mips. We therefore may as well upgrade to the latest point release.
(From OE-Core rev: f08a67b451091fcdc84b6b8b1627a8c9589e0ef3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 tree to the latest korg 3.14.26, as well as
integrating 3.14 LTSI content, and refreshing preempt-rt. Minor
conflict resolutions were performed between ltsi, stable and -rt
(From OE-Core rev: 8c30cec8233605cbec334fcc5c2b9ef5cf8f6482)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg -stable update for the 3.10 series. Minor
merge conflict resolution was done with the standard/ltsi and
standard/preempt-rt branches.
(From OE-Core rev: a87bf5d3d435d333f5ee9d15b8c641b03ff4bb9c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the latest korg -stable update for v3.17
(From OE-Core rev: 4408bfc7dd0fd2223791cb5da706dde986f4ddef)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-stable integrated the 3.16 commit f8c9301fa5a2a [mm/compaction: do
not count migratepages when unnecessary] with the 3.14.25 update.
So we have to update the lttng-module linux version codes to use the
new definition in builds greater than 3.14.24 or 3.16.
(From OE-Core rev: cf76820379746e91fc4cf01895cb98cc56987002)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest 3.10 -korg stable update. We also bring in a meta
change for the valley island IO configuration.
(From OE-Core rev: 22d5ac7e1fc096dc11c766eda91c9e131398c6c5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the korg 3.17.2 -stable release.
(From OE-Core rev: d63b126b8d68824fe900012fafe0e65afa2b264f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the kver to the latest korg stable update. This fixes some
important bugs (as well as the usual mix of more minor ones), in particular
libata bugs and SSD corruption issues are fixed.
(From OE-Core rev: 82f93cfed946fb56e53997bf6a873480bb6d3fc5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To ensure that the minimal environment has been created for out of
tree module builds, perf and lttng should depend on the do_install
task of the kernel.
(From OE-Core rev: 7f934946fdb3184a06ce1a2cdc29559e7c468492)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel-devsrc is responsible for creating and a packaging an environment
appropriate for kernel development (on or off target).
To create this support, we only need to copy/install the results of the
virtual/kernel providers build in the staging dir ... with some minor
manipulations to the source tree (.git removal and a clean up). This
produces a source tree that is capable of rebuilding the kernel on the
target.
Installing the kernel-devsrc package on a target (along with a
toolchain) is all that remains to be done.
$ cd /usr/src/kernel
$ make oldconfig
$ make -j2 bzImage
(From OE-Core rev: 6412dc1df434f774c434ec08bf9b3706edb756f2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 1.8 we want to streamline the kernel build process. Basically we
currently have multiple copies of the kernel source floating around
and the copying/compression/decompression is painful.
Lets assume we have a kernel source per machine since in most cases
this is true (and we have a sysroot per machine anyway). Basically,
instead of extracting a source into WORKDIR, then copying to a sysroot,
we now set S to point straight at STAGING_DIR_KERNEL.
Anything using kernel source can then just point at it and use:
do_configure[depends] += "virtual/kernel:do_patch"
to depend on the kernel source being present. Note this is different
behaviour to DEPENDS += "virtual/kernel" which equates to
do_configure[depends] += "virtual/kernel:do_populate_sysroot".
Once we do this, we no longer need the copy operation in
do_populate_sysroot, in fact there is nothing to do there (yay).
The remaining part of the challenge is to kill off the horrible
do_install. This patch splits it off to a different class, the idea here
is to have a separate recipe which depends on the virtual/kernel:do_patch
and just installs and packages the source needed to build modules on
target into a specific package.
Right now this code is proof of concept. It builds kernels and kernel
modules. perf blows up in do_package with issues on finding the kernel
version which can probably be fixed by adding back the right bit of do_install,
and adding a dependency of do_package[depends] += "virtual/kernel:do_install"
to perf. The whole thing needs a good write up, the corner cases testing
and probably a good dose of cleanup to the remaining code.
(From OE-Core rev: 3b3f7e785e27990ba21bc7cd97289c826a9a95d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* EXTRA_LDFLAGS isn't defined for !uclibc and configure fails
when it reads it unexpanded, see config.log snippet:
configure:4177: checking whether the C compiler works
configure:4199: i586-oe-linux-gcc -m32 -march=i586 --sysroot=/OE/sysroots/qemux86 -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed ${EXTRA_LDFLAGS} conftest.c >&5
i586-oe-linux-gcc: error: ${EXTRA_LDFLAGS}: No such file or directory
configure:4203: $? = 1
configure:4241: result: no
(From OE-Core rev: a3e9b391e1024d6d2e256b75c214d34e6693e332)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The v2.7 release of powertop fixes devfreq support for ARM, along with
other bug fixes.
v2: deletes old file
v3: fixed SRC_URI and checksums
(From OE-Core rev: 4bc65feb8f90180fdb8ff23ece2a9f30c3346832)
Signed-off-by: Ezra Savard <ezra.savard@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opcontrol is now dropped and replaced with the operf interface. As such, we drop
the opstart/opstop commands and any patches related to the old removed interfaces.
Some patches were also mered upstream so those are also dropped.
There is also a problem found on mips with the security flags enabled, the
patch has more specific details.
(From OE-Core rev: 33b7885ecdc8774e34ac3534ec49fed6ffdb3916)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have quite a number of Makefiles out there without a
clean target. Rather than have all cases code an empty do_configure, add
a CLEANBROKEN variable which when set to "1" will disable the attempt to
"make clean".
This patch also adjusts various recipes which either have this problem
fixed, or have been reported to have make clean failures.
(From OE-Core rev: 45b7d3add14eafc25da62bab68d4ae133f8dcb57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
INHIBIT_PACKAGE_STRIP variable will make debuginfo lose in shared library.
The test cases of kmod contain kernel modules for many different architectures,
strip and arch gets confused and throws errors. Pack kernel modules in test
cases to avoid strip command failed.
(From OE-Core rev: 3576399ed163cb3136ee1a2077622035d2033158)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to incoroprate the full 3.17 release, and also
updating the meta data to match the v3.17 content:
9ba007f8d0ab meta: bump kver to v3.17-final
5c6c5fe9b0bf config: remove CONFIG_HOTPLUG
0ceecad5f15a qemu: explicitly include usb configuration fragments
f6c78ada8655 gfx: convert CONFIG_TABLET_USB_WACOM to CONFIG_HID_USB_WACOM
cd1dbedfa3c9 x86: Support 32 bit binaries
(From OE-Core rev: 18de1328dc99b851742468a3f366e3acdcce48d4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs for the following fix:
8250/8250_dw: fix compile failure due to stable/Yocto conflict
As of merge 60a9d9fc565e4503dbb8705803e83d906afc4ad2, "Merge
tag 'v3.10.48' into standard/base" the 8250_dw.c fails to
compile due to an undeclared variable.
This happens because stable brought in:
-------------------------
commit 6d5e79331417886196cb3a733bdb6645ba85bc42
Author: Tim Kryger <tim.kryger@linaro.org>
Date: Tue Oct 1 10:18:08 2013 -0700
serial: 8250_dw: Improve unwritable LCR workaround
commit c49436b657d0a56a6ad90d14a7c3041add7cf64d upstream.
[...]
[wangnan: backport to 3.10.43:
- adjust context
- remove unneeded local var]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
------------------------
...which deletes the p->private_data declaration since it became
unused at that point, however in Yocto, we also have this:
-----------------------
commit 0e02b050c3cafbcbf9952125089a27e02d6ecea9
Author: David Daney <david.daney@cavium.com>
Date: Wed Jun 19 20:37:27 2013 +0000
tty/8250_dw: Add support for OCTEON UARTS.
[...]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit d5f1af7ece96cf52e0b110c72210ac15c2f65438)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
-----------------------
...which _adds_ another user of the p->private_data.
Here we restore the declaration in order that 8250_dw compiles.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
[PG: add root cause info to commit log.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 4b4d1f38ea54ef8545e726ac9e181da08a2bad05)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Creates x11 packageconfig and update DEPENDS and EXTRA_OEMAKE_X
for better handling.
(From OE-Core rev: b853cead2e0965b9797b40d6b59bed67804f459f)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When cross compiling libunwind support for ARM a missing debug include means
that pr* macros are not expanded, and hence link failures on the undefined
functions.
Since we must be compatible with many versions of the kernel and perf, we
sed the proper include into the files, while the permanent fix goes upstream
to the mainline kernel.
(From OE-Core rev: 81bb7a163d7e3c0bdcc72894ef731521d58edf90)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.17 tree to the rc7 release.
(From OE-Core rev: 6957ce3e726de5dbdcf3e94c5919916d88736e8d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was found that some of the recent feature merges for 3.14/3.17 are
not allmodconfig and allyesconfig safe.
Since this is a basic test before kernel patches are submitted, we've
fixed the features to meet this standard.
Integrating the following fixes from Paul Gortmaker:
b4213d81ea3f fat: don't use obsolete random32 call in namei_vfat
2cc7eba15c1f cryptodev: stomp dynamic version numbering for in tree builds
5d1dda7aae4b Target/dif: Introduce protection-passthough-only mode
3d9772d8facf vhost: fix compile fail due to reallocated acked_features field.
efad59d3a174 virtio-scsi.h: Add virtio_scsi_cmd_req_pi + VIRTIO_SCSI_F_T10_PI bits
902f34d36102 aufs: apply aufs3-mmap.patch from 3.14 branch
30efc2e9484e aufs: import core files from aufs3.14 20140915
e42f87adef10 Revert "aufs: aufs3-mmap.patch"
a818774bd338 Revert "aufs: core aufs filesystem"
(From OE-Core rev: d1c40ccb522b5c5a61d5faab7e0f65491e201a27)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BPF feature is causing build failures, so we are reverting it
for now.
In this update we also have the following fix for -rt:
fb6271a942b5 intel: Remove the standard ktype nesting
(From OE-Core rev: 57a82d3bf0bf34bba9d0801057a4b8a6aa230228)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two issues were reported with the 3.14 kernel, cryptodev was not properly
building and working on all devices, and menuconfig was not working on some
hosts.
To fix this, we pull in the latest cryptodev updates, and restore an old
ncurses patch for menuconfig.
(From OE-Core rev: 35f932314541067b16b60ed5bc054a80f973dd35)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During patch processing a consolidated set of configs, patches and directives
is created under the kernel source tree being modified. During that processing,
absolutely paths are converted to relative. It has been found that if directories
are sufficiently similar, like so:
/path/to/my-linux
/path/to/my-linux-3.16
The processing will chop to much of some paths, resulting in invalid relative
directories (like -3.16 in the above example).
Importing the following two kern tools fixes for the issue:
23345b8846fe kgit: retain trailing / in directory processing
a8cf93a3bc94 kgit-s2q: move subject and diffstat mismatch to 'fuzzy' matching
[YOCTO: #6753]
(From OE-Core rev: 660c90458e8b4114e4a8deb920e44263e03a1ec6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oprofile_git.bb does not unpack because it stills uses
INC_PR, which is no longer expanded. If one fixes that,
patching fails. Since there is another, later, version oprofile
recipe, we might just as well get rid of this one.
(From OE-Core rev: 0ef8390425ef5722c00074e962e64e70b7ff8598)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lttng-modules recipe was failing for meta-intel BSPs with the v3.17 kernel.
These BSP kernels were enabling some of the audio codec drivers, whose
structures are changed recently, causing mismatch with lttng-modules code
expectations. The qemu machines did not see this issue as they were not
enabling these sound codec kernel configuration.
Fix the build issue, by changing the lttng-modules code to match with
the structures used by the v3.17 kernel. The code is conditional on the
kernel version, that way it keeps working with the older kernel versions.
(From OE-Core rev: 1854d6c2e6dda4fd6900399d827413fcc1e1aef6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, perf can't split to perf-archive, perf-tests, perf-python and
perf-perl. All files are included in perf package. Change the perfexecdir
variable to make split successfull. Add python to RDEPENDS_perf-tests.
(From OE-Core rev: 32fcc621401e7761d9b96bc5b7bef143c1c29695)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libvirt is automatically linked to if present, this undetermined
dependency may cause build errors like:
../lib/libvirt.so: undefined reference to `libssh2_channel_open_ex'
../lib/libvirt.so: undefined reference to `libssh2_session_hostkey'
...
Both libvirt and libssh2 are not oe-core recipes for now, just disable
libvirt to fix this issue.
(From OE-Core rev: 815b44914eb30b86dfce0e81ffda7884e0efcc34)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg -stable update.
(From OE-Core rev: 7212dcb3a67b9a9b844b74e997d2e3ea7902555f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg -stable update.
(From OE-Core rev: 9745ffc0ae25be980d92f195937cef6d1f406ab2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.17 recipe to -rc6. This is nearly the release kernel, and should
have very few changes aftert this point.
(From OE-Core rev: 845e01d906982c2147828b97129e95e8a79dce7c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.17 repository is ready, so we no longer need to reuse the
linux-yocto-dev tree.
(From OE-Core rev: c304674833360e0e2dceca3ebeb535025597e46f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the SRCREVs to import the latest korg -rc.
(From OE-Core rev: 8ae153f7da3244c3dd24cc5dbd722af26624201b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refreshing the 3.14 kernel to a new korg stable and -rt release.
(From OE-Core rev: 91204afeb508ae21f8f2a32c340ec85efbf33fd0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.10 kernel needed a refresh to the latest -stable and -rt releases.
(From OE-Core rev: c7360e9e72f06dab2617e16ae546f4d8e5262fa1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG to support --enable-python-bindings
Add PACKAGECONFIG to support lttng-ust
And python-bindings requires swig-native as DEPENDS, and
swig-native is not in oe-core, so disable python-bindings
by default
(From OE-Core rev: 9557bf88287216ff8cb98005cbc85b6928f4495c)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the -dev recipes PV to reflect that the development tree is
now at v3.17-rc4.
(From OE-Core rev: 0a5353ef42814afea33ce5d69c1fe80e3b3257ba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the topic branch that is used for valleyisland-io merges.
(From OE-Core rev: 4d804dc8d683024ef2a0a07200492f458f52b535)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this commit, we introduce the v3.17-rcX kernels, which will be
released as part of the 1.7 yocto project.
All architectures have been compiled and booted with this revision
of the kernel.
(From OE-Core rev: 07315861450ebf3cd224f4700eb125b74057aa0f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The powerpc perf arch port has two issues in the current 3.17-rc
seriers. Undefined dwarf symbols and undefined pr_debug calls.
commit a60335ba [perf tools powerpc: Adjust callchain based on DWARF debug info]
introduces skip-callchain-idx.c, and breaks the perf build.
Until fixes get into the mainline kernel, we temporarily fix the issues by
adding a forced linke to -ldw and modifying skip-callchain-idx.c to include
the proper debug files for pr_debug.
(From OE-Core rev: 9f204a02f07f8e378e8a078db103a6ba94ec55cb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the lttng-modules 2.5 recipe with backports from the master branch to
enable builds on 3.17 based kernels.
(From OE-Core rev: cc2ef9b0f6371837faa5e430c0b6c48bf24a8c4c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new feature named 'perf-libunwind'. Adding this support to perf allows it
to do stack traces on ARM - thumb2 and MIPS targets. PERF_FEATURES variable in
perf-features.inc will enable the perf-libunwind.
(From OE-Core rev: 10dfa4ee4e05841be3d3caaa28778aa40b782f97)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a cross compilation fix. It allows systemtap to find the
kernel map file in the right place, i.e. in the kernel build tree.
Without this fix it takes a map file from the build host, if available.
(From OE-Core rev: 787bed708676fc04aee2850825e803273152f657)
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Muzaffar Mahmood <muzaffar_mahmood@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to prevent the init script from running via systemd because
its functionality has been implemented interanlly in systemd.
In a systemd system, we can add configuration files under
/etc/modules-load.d/ to make things work.
(From OE-Core rev: 8fc304a59bb3977146645fe2c3570a3aaa4aac39)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
$ bitbake perf lib32-perf
ERROR: QA Issue: lib32-perf: Files/directories were installed but not shipped
/usr/lib64
/usr/lib64/traceevent
/usr/lib64/traceevent/plugins
/usr/lib64/traceevent/plugins/plugin_function.so
/usr/lib64/traceevent/plugins/plugin_scsi.so
/usr/lib64/traceevent/plugins/plugin_hrtimer.so
/usr/lib64/traceevent/plugins/plugin_kmem.so
/usr/lib64/traceevent/plugins/plugin_jbd2.so
/usr/lib64/traceevent/plugins/plugin_xen.so
/usr/lib64/traceevent/plugins/plugin_mac80211.so
/usr/lib64/traceevent/plugins/plugin_cfg80211.so
/usr/lib64/traceevent/plugins/plugin_sched_switch.so
/usr/lib64/traceevent/plugins/plugin_kvm.so [installed-vs-shipped]
The perf.do_configure edits kernel's
${STAGING_KERNEL_DIR}/tools/perf/config/Makefile, there would be
problems since kernel doesn't have multilib, and the build result is
undetermined.
Previously, the sed command changed libdir to /usr/lib64 (or 32) in the
Makefile, so the build result was different if we build perf (64) first
or lib32-perf first.
Use the weak assignment "libdir ?=" to instead of "libdir =" will fix
the problem since the multilib builds are in different processes, and
they won't affect each other any more.
The sed command will match both $(prefix)/$(lib) and $(prefix)/lib since
the Makefile may has been modified before this patch.
(From OE-Core rev: c62d693e1341be4afcaaeb1ee37360ecac71f46a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make KBRANCH assignments more flexible and easy to override the
default in each recipe as changed to a conditional assignment. But the
common include file, sets its own branch default to master.
This results in the recipes not overriding KBRANCH and master always being
used.
By putting the include after the default assignment, we now get the proper
default branch.
(From OE-Core rev: ef48de6a4c1454c6f6e2de8636277b374ee44b50)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the 3.4 recipes, since support has not shifted to 3.10 and
3.14 for LTSI kernel versions, with 3.16+ as the development version.
(From OE-Core rev: 362aaebbeb7b241edba00dd8ea08eab07596378c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 repository to the latest korg stable udpate.
(From OE-Core rev: 1bb73c05ff0304d5626d977d2751107bb23de48c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto/3.14 SRCREVs to integrate more feature additions
and backports to the LTSI kernel base:
42477caf6bfd block, bfq: add Early Queue Merge (EQM) to BFQ-v7r5 for 3.14.0
349aa3f0848d block: introduce the BFQ-v7r5 I/O sched for 3.14
121ed2738c47 block: cgroups, kconfig, build bits for BFQ-v7r5-3.14
9925795a3e54 vhost-scsi: Include prot_bytes into expected data transfer length
68fe340cb836 vhost: move memory pointer to VQs
72fa27bcf526 vhost: move acked_features to VQs
757680234478 vhost: replace rcu with mutex
050c1440ac73 vhost-net: extend device allocation to vmalloc
d68641313156 vhost/scsi: Enable T10 PI IOV -> SGL memory mapping
fb89a8df7f1c vhost/scsi: Add T10 PI IOV -> SGL memory mapping logic
5caf8475ee8a vhost/scsi: Add preallocation of protection SGLs
c0785b9490a8 vhost/scsi: Move sanity check into vhost_scsi_map_iov_to_sgl
bd947327cdf6 vhost: don't open-code sockfd_put()
83fab2df94c6 openvswitch: Use exact lookup for flow_get and flow_del.
9c185c40f7a8 openvswitch: Fix tracking of flags seen in TCP flows.
0d2455332847 openvswitch: supply a dummy err_handler of gre_cisco_protocol to prevent kernel crash
4513a2fd2703 openvswitch: Fix a double free bug for the sample action
1acf10deff18 openvswitch: Simplify genetlink code.
9ea6a4dea3f5 openvswitch: Minimize ovs_flow_cmd_new|set critical sections.
9e76764432cf openvswitch: Split ovs_flow_cmd_new_or_set().
7bafcd59a838 openvswitch: Minimize ovs_flow_cmd_del critical section.
67980f929444 openvswitch: Reduce locking requirements.
347f9442b559 openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.
c7aa7c522ec0 openvswitch: Fix typo.
b244c7b19a55 openvswitch: Minimize dp and vport critical sections.
21883a3ffdb6 openvswitch: Make flow mask removal symmetric.
ffa173197cf5 openvswitch: Build flow cmd netlink reply only if needed.
f3e8e5c07505 openvswitch: Clarify locking.
df42a8f505c2 openvswitch: Avoid assigning a NULL pointer to flow actions.
91b07542da22 openvswitch: Compact sw_flow_key.
24bb1a576332 net/openvswitch: Use with RCU_INIT_POINTER(x, NULL) in vport-gre.c
808868318939 openvswitch: Use TCP flags in the flow key for stats.
a57851bae1cf openvswitch: Fix output of SCTP mask.
8b70125106ee openvswitch: Per NUMA node flow stats.
606497442f52 openvswitch: Remove 5-tuple optimization.
01e74b175909 openvswitch: Use ether_addr_copy
b5d02cfdc985 openvswitch: flow_netlink: Use pr_fmt to OVS_NLERR output
4da9e8d176f9 openvswitch: Use net_ratelimit in OVS_NLERR
ee8f673dd798 openvswitch: Added (unsigned long long) cast in printf
b67f35f8b0aa openvswitch: avoid cast-qual warning in vport_priv
3e01428f6e0c openvswitch: avoid warnings in vport_from_priv
069ee359a487 openvswitch: use const in some local vars and casts
cbec86356a89 vxlan: add x-netns support
a51970560923 vxlan: ensure to advertise the right fdb remote
696068dca072 vxlan: remove unused port variable in vxlan_udp_encap_recv()
e94003f3b58d sched/deadline: Fix sched_yield() behavior
(From OE-Core rev: b05729f22dbda6257a9469313a401c5ed3211ada)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From the kern-tools commit:
tools: allow meta directories that are not the same as the branch name
With this change it is now possible to have a meta branch with meta data
in a directory that is not the same name as the branch.
The changes to three parts of the build are required to discover the name
of the meta directory by relying on the fact that in a clean/proper build
the meta directory is the only untracked, top level directory in the build.
As such, we can restore a checkpoint and then examine the build directory
to determine the meta directory name .. avoiding any new variables to
indicate this to the scripts and build system.
(From OE-Core rev: 36823f7aff5c8e28900997c96a97c302947981b0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KBRANCH_DEFAULT is no longer used, so we can remove it from all
recipes (and it won't be missed).
(From OE-Core rev: e631fc989b08873f559c5927117301294f04298c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-libc-headers to the 3.16 release. This matches the
current -dev kernel version, and is compatible with the existing
named kernel versions (3.10, 3.14).
(From OE-Core rev: 7246d62406acf862d3c79e6f615e0c595d46845e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ptest will hang when execute "./run.sh fast_regression" and lttng background
daemon can't be killed normally. This patch fixes this issue and use ${PTEST_PATH}
instead of long path.
(From OE-Core rev: 0a90616b09290e4651aafe1186229d861392e89f)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no bashism in the scripts, so use /bin/sh, and add /bin/sh
interpreter for systemd's run-ptest.
(From OE-Core rev: 62d455f89fb1d2c22cf987bdbb56a55e6d031ce0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add bash, python or perl to the ptest pkgs to fix the RDEPENDS issues.
(From OE-Core rev: d081a85fc76e2b7a469c6c70175ecf7aed9de053)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The same change has already been applied to kernel.bbclass in commit 55989cb5:
[ kernel.bbclass: Stop bundle_initramfs thwarting sstate cache and fix race ]
The dummy kernel should comply with it.
(From OE-Core rev: 0897fd6feb19b545af2ebc148a2f6f99341841a9)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of LTSI efforts, the 3.14 kernel is receiving feature backports
from newer kernels.
With this change, we update the 3.14 SRCREVs to make the following
changes available:
- full nohz backports (v3.16)
- loopback NFS (v3.16)
- numa updates (v3.16)
- cgroups: vm_cgroup: basic infrastructure
- cgroups: Resource controller for open files
And the following configuration change:
- meta: features/ieee802154: add configuration fragment for IEEE 802.15.4
- meta: features/bluetooth: add configuration fragment for Bluetooth support
- meta: intel-common-standard: add ericson-3g to intel-common-standard.scc
- cgroups: enable virtual memory resource controller
- full nohz: Enable full dynticks system for nohz
(From OE-Core rev: fe2f51571f97e2cceae974f6a18782025e080c32)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update SRCREVs for the following feature ports:
d61940e2aaee fs/hugetlbfs/inode.c: remove null test before kfree
01a9d1b96a67 fs/hugetlbfs/inode.c: use static const for dentry_operations
b58086c38038 fs/hugetlbfs/inode.c: add static to hugetlbfs_i_mmap_mutex_key
182a45b35b74 fs/hugetlbfs/inode.c: complete conversion to pr_foo()
a3c4b02bbb05 mm: hugetlb: fix copy_hugetlb_page_range()
3757fbab4c89 hugetlb: rename hugepage_migration_support() to ..._supported()
4d91ab2d26a0 mm, hugetlb: move the error handle logic out of normal code path
49ea68f6eb8b hugetlb: add support for gigantic page allocation at runtime
78dcff916fdf hugetlb: move helpers up in the file
07b911e0a765 hugetlb: update_and_free_page(): don't clear PG_reserved bit
d38ffe086659 hugetlb: add hstate_is_gigantic()
46b2dd4acbaa hugetlb: prep_compound_gigantic_page(): drop __init marker
8b4da9338c22 hugetlb: ensure hugepage access is denied if hugepages are not supported
450e7d23d98c mm/hugetlb.c: add NULL check of return value of huge_pte_offset
370cd4423fc4 mm, hugetlb: mark some bootstrap functions as __init
31f0f8869bc9 mm, hugetlb: improve page-fault scalability
f57f488c939b mm, hugetlb: use vma_resv_map() map types
3263ee955d10 mm, hugetlb: remove resv_map_put
92067ee5ebfd mm, hugetlb: fix race in region tracking
30e1ab0b7502 mm, hugetlb: improve, cleanup resv_map parameters
2d5919397a7b mm, hugetlb: unify region structure handling
a36af1327d41 Fix [RFC] cgroups: Resource controller for open files.
7dc531576e41 cgroups: Resource controller for open files.
(From OE-Core rev: 37fb3b84f701b88e95d6a3e2efccc46e8c01c1cf)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial version of "spi/pxa2xx: Add common clock framework support in PCI glue layer"
enables the baytrail series of processors, but breaks some existing users of
the framework.
There's a new version of the patch out for review, so we revert the broken one and
udpate to the latest.
(From OE-Core rev: beae066d5af96e78d3bbaa52884922cb39bb48fd)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 linux-yocto SRCREVs for feature backports:
6cfe9c448741 x86, kaslr: boot-time selectable with hibernation
881a5f5812fd x86, kaslr: fix module lock ordering problem
121ec40d905d x86, kaslr: randomize module base load address
6efd2d21273c x86, vdso: Add 32 bit VDSO time support for 64 bit kernel
642441e17072 x86, vdso: Add 32 bit VDSO time support for 32 bit kernel
1d8dd2e617d4 x86, vdso: Patch alternatives in the 32-bit VDSO
353f3eadb16d x86, vdso: Introduce VVAR marco for vdso32
5e6e6ec6eb5c x86, vdso: Cleanup __vdso_gettimeofday()
91efa61ed6c2 x86, vdso: Replace VVAR(vsyscall_gtod_data) by gtod macro
f9c259ee1b2f x86, vdso: __vdso_clock_gettime() cleanup
63d9b1c4ec72 x86, vdso: Revamp vclock_gettime.c
e3a8ed44c964 mm: Add new func _install_special_mapping() to mmap.c
02a67e32e58d x86, vdso: Make vsyscall_gtod_data handling x86 generic
d076cfb68504 x86, vdso, xen: Remove stray reference to FIX_VDSO
949153696c99 x86_32, mm: Remove user bit from identity map PDE
e5cf7dfec74d x86, vdso: Remove compat vdso support
(From OE-Core rev: 00dcb084682b7599f2a3e69dcb4978cbb38f5c58)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating from 3.14.5 -> 3.14.13 to pick up the latest series of korg
stable updates.
(From OE-Core rev: bb1b6b7e580d5dfebf8aa424bff83f9ccadfba19)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the following commits to the 3.14 tree for ARM kprobe support:
c1750e55eb75 ARM: add uprobes support
33e8a1334afe ARM: Make arch_specific_insn a define for new arch_probes_insn structure
b1d3feead083 ARM: Add an emulate flag to the kprobes/uprobes instruction decode functions
84b5b70a01a2 ARM: Change the remaining shared kprobes/uprobes symbols to something generic
624e5e9aab5a ARM: Rename the shared kprobes/uprobe return value enum
7741eac39c2e ARM: Change more ARM kprobes symbol names to something more generic
47f51bac6a2d ARM: Make the kprobes condition_check symbol names more generic
3af2f454bb8e ARM: Remove use of struct kprobe from generic probes code
a31964d3143a ARM: use a function table for determining instruction interpreter action
6de77767abfc ARM: move generic thumb instruction parsing code to new files for use by other feature
eb2db188b856 ARM: Move generic arm instruction parsing code to new files for sharing between features
bbc0a43ff46e ARM: move shared uprobe/kprobe definitions into new include file
f5f2896020e6 uprobes: allow ignoring of probe hits
cb133db6bd60 ARM: Fix missing includes in kprobes sources
(From OE-Core rev: 835bb10d07d1a64119379e9837dd853dacfe79bc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the META branch SRCREV to import iio configuration settings.
(From OE-Core rev: bb8cada68e70b1246a76046a37ba57a3ca7aedde)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is only one script lttng-gen-tp which is a python in
lttng-ust-bin, and it is a python script.
And the lttng-ust doesn't have to rdepend on python.
(From OE-Core rev: 99570ce7c5a9276d1d934533339e10de8fcf0aab)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bash script:
dtc-misc/usr/bin/dtdiff
There are two files in this pacakge, another one is (binary):
dtc-misc/usr/bin/convert-dtsv0
(From OE-Core rev: 4b609d099d91840ec05d71d29fe33786122b2d81)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to latest stable-2.5 revision.
* Drop Fix-alignment-problems-on-targets-not-supporting-una.patch, merged
upstream.
* New build-dependency on libxml2, so inherit pkgconfig so the test works and
delete the copy of libxml.m4 that overrides our sysroot.
Based on a patch from Yasir-Khan <yasir_khan@mentor.com>.
(From OE-Core rev: 19c16a45a3410b9ecae8682b628f2badffec9375)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in question clearly states MIT is a third license. Update
LICENSE to reflect this (in one case, we did list BSD which is effectively
the same thing but this removes confusion).
(From OE-Core rev: d7f79359d7f7fe9da12f27abe5d79ec0fefba058)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `parse-events.o'. Stop.
make: *** Waiting for unfinished jobs....
ERROR: oe_runmake failed
This happens when upgrade gcc from 4.9.0 to 4.9.1, and the
.parse-events.d isn't regenerated when recompile, the content of it are:
[snip]
parse-events.o: /path/to/sysroot/4.9.0/include/stddef.h
[snip]
And Makefile includes the .parse-events.d file if it exists, so there
would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't
exist.
Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix
the problem.
(From OE-Core rev: d56657cf5def88682954a97b4d94603ad81fd6e5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes floating dependency:
kernelshark-1.2+gitAUTOINC+7055ffd37b: kernelshark rdepends on libxml2, but it isn't a build dependency? [build-deps]
(From OE-Core rev: 99300ef40c4b1f7eeaf5503fa293114d7b602d30)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current trace-cmd version 1.2 throws "recorder error in
splice input" error while recording a trace on kernel
version 3.10. Update the trace-cmd version to latest 2.3.2
to resolve this error and drop the redundant patches.
* patches dropped - not needed anymore
- trace-cmd-Add-checks-for-invalid-pointers-to-fix-seg.patch - backport
- trace-cmd-Do-not-call-stop_threads-if-doing-latency-.patch - backport
- trace-cmd-Setting-plugin-to-nop-clears-data-before-i.patch - backport
- trace-cmd-fix-syntax-error-of-shell.patch - backport
(From OE-Core rev: 3b5e792f3245e28495d61d7d7e8df0ef30070ebc)
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The vmcore commit emptied out ${PN} leading to things like:
Collected errors:
* opkg_install_cmd: Cannot install package kexec-tools.
Let's do the right thing and make ${PN} an empty meta-package that drags in all tools like people expect it to do.
(From OE-Core rev: 9e4f66ec4921c4886203dce99c105141787cc77b)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield
Christopher Clark
Jussi Kukkonen
Ross Burton
Robert Yang
Saul Wold
Jens Rehsack
Khem Raj
Marek Vasut
Tudor Florea
Hongxu Jia
Martin Donnelly
Richard Purdie
Maxin B. John
Roy Li
George McCollister
Chen Qi
Christopher Larson
Tzu-Jung Lee
Alexander Kanavin
Wenlin Kang
Otavio Salvador
Armin Kuster
Andre McCurdy
Bhuvanchandra DV
Nathan Lynch
Paul Eggleton
Stefan Christ
Aníbal Limón
Li Zhou
Denys Dmytriyenko
Romain Perier
Joshua Lock
Noor
Reinette Chatre
Cristian Iorga
Quanyang Wang
Kevin Hao
Li xin
Jianchuan Wang
Jackie Huang
Mariano Lopez
Maxin B. John
Alexandru.Vaduva
Koen Kooi
Mehaffey, John
Jonathan Liu
Fathi Boudra
Ben Shelton
Ricardo Ribalda Delgado
Mark Hatle
Gustavo Sverzut Barbieri
Petter Mabäcker
Darren Hart
Tom Zanussi
Kai Kang
Joe Slater
Martin Jansa
Ezra Savard
Krzysztof Sywula
Chong Lu
Nitin A Kamble
Wenzong Fan
Mikhail Durnev
Ming Liu
Yasir-Khan