In order to have a shared sysroot usable within the eSDK after recipe
specific sysroots were implemented, we need to run
bitbake build-sysroots as a separate call. However, unlike the first
call, --quiet wasn't being specified and that somewhat undermined the
earlier effort to clean up the eSDK installation output. Make this
second call quiet as well so that the output is tidier.
(From OE-Core rev: 56b73788edaa0796e53f1a30e9ebdb2ae85b1646)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
(From OE-Core rev: 809746f56df4b91af014bf6a3f28997d6698ac78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
(From OE-Core rev: 80dfaf40e087b34d6360188df372c1c3805a00bd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the extensible SDK installation process the final step is to
prepare the internal copy of the build system. This can take some time,
especially if you have SDK_EXT_TYPE set to "minimal" (downloading
sstate artifacts) and SDK_INCLUDE_PKGDATA set to "1" (restoring
pkgdata for world). To make this a bit less painful, use BitBake's new
quiet mode to display status during this operation so you have some idea
of how it's progressing; instead of redirecting the output to
preparing_build_system.log we grab the last console log and append it
instead.
One result of this change is that you get the errors printed on the
console during normal output rather than this going to the
preparing_build_system.log file first. In OE-Core revision
227d2cbf9e0b8c35fa6644e3d72e0699db9607fa, we changed to always print the
contents of preparing_build_system.log on failure, but now at least the
error contents of that log is duplicated. Besides, I intentionally
didn't print out the contents of that log during normal usage because
it's quite verbose - the bug that we were attempting to fix was about
not getting this information when seeing failures in the automated
tests, thus I've moved printing the log to the test handling code
instead.
Part of the implementation for [YOCTO #9613].
(From OE-Core rev: 0f7cb880c934b7871f3b8432f4f02603300f6129)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new BB_SETSCENE_ENFORCE functionality to avoid having to run
bitbake twice on installing the extensible SDK - we can now do it all in
one invocation which not only takes less time, but we should also get
more meaningful errors for some types of failure, in particular where
downloading from an sstate mirror fails.
One result of this change is that you get the errors printed on the
console during normal output rather than this going to the
preparing_build_system.log file first. In OE-Core revision
227d2cbf9e0b8c35fa6644e3d72e0699db9607fa, we changed to always print the
contents of preparing_build_system.log on failure, but now at least the
error contents of that log is duplicated. Besides, I intentionally
didn't print out the contents of that log during normal usage because
it's quite verbose - the bug that we were attempting to fix was about
not getting this information when seeing failures in the automated
tests, thus I've moved printing the log to the test handling code
instead.
Part of the implementation of [YOCTO #9367].
(From OE-Core rev: e1390c1ef85862b91b067ab24f3c06ca506155ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 doesn't have basestring type as all string
are unicode strings.
(From OE-Core rev: e8cfab060f4ff3c4c16387871354d407910e87aa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the esdk with INHERIT += "rm_work", the script complains
about do_rm_work as unexpected output from the bitbake run. This patch
ignores any output lines with do_rm_work and further refactors the
output comparison into its own function creates a new unit test to
verify the fix. The unit test can be run direct from the command line or
via oe-selftest.
[YOCTO #9019]
(From OE-Core rev: d41930e1daa933cf4bf063fa79a2e8fc9129e1b1)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There appears to have been a lot of copy and pasting of the code
which prints tracebacks upon failure and limits the stack trace to
5 entries. This obscures the real error and is very confusing to the user
it look me an age to work out why some tracebacks weren't useful.
This patch removes the limit, making tracebacks much more useful for
debugging.
[YOCTO #9230]
(From OE-Core rev: 6069175e9bb97ace100bb5e99b6104d33163a3a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of skipping the build system preparation step within the
extensible SDK install process when SDK_EXT_TYPE is "minimal", run
bitbake -p so that the cache is populated ready for the first time
devtool is run.
(From OE-Core rev: 6b38a991a3475fb82889428b94563968c7570473)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the eSDK, if setscene task fail for some reason, the tests
would ignore this. This is bad since we assume they're working.
This adds some sanity test code which detects if setscene tasks are
needing to run and errors if there are any.
(From OE-Core rev: 7ea670c3b00439ca5eeb6ae1efd475f0954268b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the change to use --setscene-only when running bitbake to prepare
the SDK at the end of installation, add a check that the SDK got
prepared correctly by doing a dry-run and looking at the output for any
real tasks that we don't expect. In order to make this easier, the
preparation shell script was rewritten in python.
(From OE-Core rev: 2306683634435b990e63020fc5cf91753bbaf7b6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Richard Purdie
Ed Bartosh
Bill Randle