This is due to specifying .h files on linker cmdline
clang driver is picky about it, and its not entirely correct
either
(From OE-Core rev: de45b5e68faeefe3d68818d456f280b98f397634)
(From OE-Core rev: 44dcee60e343944199ee766ec0886931ff2b0699)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For certain swap/overcommit settings (e.g. when overcommit is disabled
on a real-time system), we need to limit the stack size used by
initscripts. When the STACK_SIZE environment variable is set (usually
in /etc/default/rcS), ulimit the stack size to the value specified.
Make the stack size ulimit a soft limit, which allows the user to
increase the stack size where required without having to run the
respective application as root.
(From OE-Core rev: 0b5db16929de7668174e74e428f3e4e90e76e1d8)
Signed-off-by: Scot Salmon <scot.salmon@ni.com>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Rich Tollerton <rich.tollerton@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>
Acked-by: Bill Pittman <bill.pittman@ni.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootlogd does not write to /var/log/boot if it does not exist,
so if using the volatiles facility (presumed to mount /var/log under a
tmpfs), ensure that /var/log/boot gets created.
(From OE-Core rev: 283d109098358c06ff10daaf612e5a244691d7ac)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootlogd's default log rotation code on stop requires `savelog`, which
is in debianutils, which may not be installed. If it's not installed,
don't try to perform the log rotation.
That is: in the affected code block, `savelog` is what is responsible
for creating "boot.0". When `savelog` doesn't exist, an error message
gets printed on bootup to the effect of "mv: can't find boot.0".
(From OE-Core rev: 5c22973e1bf76615bcf57984ac7a30cf7d0766df)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The messages echoed when starting and stopping bootlogd are currently
printed regardless of the setting of VERBOSE. Adjust the initscript so
they're only printed when VERBOSE is enabled.
(From OE-Core rev: 42f107513148aa6e9fd69d51e63a183c613114c0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
(From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an race condition where psplash is not quite exited before the unmount occurs
causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily
unmount and not get this message
[YOCTO #5244]
(From OE-Core rev: 9ded366084f22f48ef72aa22acf6a38982d16d97)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, our system had no boot log even if the bootlogd daemon was
started correctly. The root cause is that the log file doesn't exist
when starting the bootlogd.
Add '-c' option to bootlogd so that it will create the boot log if
it doesn't exist.
[YOCTO #5273]
(From OE-Core rev: 6059be3ab60b8ab463d438c47bb17553d184a790)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'need' and 'provide' files are there for simpleinit compatability,
according to the comments in these two files.
However, we don't use simpleinit and there's even no simpleinit recipe
in OE. Besides, these two files are not installed.
This patch removes these two unused files.
(From OE-Core rev: 05ac5627208c98007cd4c7aed9d76f179cd974a9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, psplash didn't go away at system startup.
The root cause is that rc checks the file '/etc/init.d/xserver-nodm' to
determine whether to exit psplash manually. So even if xserver-nodm is not
linked into runlevel 3, psplash doesn't exit.
This patch fixes this problem by letting the rc script check the file
'/etc/rc${runlevel}.d/S??xserver-nodm' to determine whether to exit psplash
manually.
[YOCTO #3904]
(From OE-Core rev: 70b14f1c4181d820e56e67f4a5d921905094dc62)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable indicates whether the rootfs is intended to be read-only
or not. Changing this value from 'no' to 'yes' on a currently running
system with read-write rootfs and rebooting will give the user a working
system with read-only rootfs.
However, it is not suggested to change its value. Normally, if a read-only
rootfs is required, we should build an image with 'read-only-rootfs' image
feature.
[YOCTO #3406]
(From OE-Core rev: 0b4af5f3e6c92ae8194447b027202c1933f47dd9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make UTC variable in /etc/default/rcS has effect on hwclock.sh.
This variable declares whether the Hardware Clock is kept in UTC
or local time. Default its value to "yes" and change the comment.
[YOCTO #3341]
(From OE-Core rev: 2bda4bbda3f3033cfb324778ef88f2aedad4a83b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also remove postinst and prerm which were not being used.
(From OE-Core rev: 60fd9974e5c9a0576059ebded6de7b599f9574e5)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typoes fixed: "enviroment", "editted", "spliting", "scheulder".
(From OE-Core rev: 17e981a857a51b0bec08c929e8539d36d83874b6)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implements the improvements suggested in the original fix for [YOCTO #1131]
(From OE-Core rev: e9cde6962d369fb620799d0370ea9dc7d6234d37)
Signed-off-by: <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a check to the rc script to check if the /etc/init.d/xserver-nodm
script exists and is executable and not disable psplash if it is,
otherwise disable pspalsh since we do not have X installed.
Fixed [BUG #457]
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Khem Raj
Scot Salmon
Richard Tollerton
Roy Li
Saul Wold
Chen Qi
Jackie Huang
Mark Hatle
Robert P. J. Day
Koen Kooi
Saul Wold
Richard Purdie