Use up-to-date version from git. While currently there aren't official releases
newer than 0.7.5, quite some new features have been added in git, for example
the ability to disable the calibration screen timeout.
Additionally depend on libxrandr, so that xinput_calibrator can use the library
directly to obtain the geometry, instead of parsing the output of the xrandr
binary (parsing of the output can easily break, for example when the output
name is made up of two words instead of one).
(From OE-Core rev: 97e0bf4e1c79077a0f6dc25e0b8888506481f536)
Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In qemu, the emulated PS/2 mouse reports itself as an "absolute coordinate"
device and that makes xinput_calibrator think it could be calibrated.
Add a dummy calibration file as a work around to prevent xinput_calibrator from
popping up on every boot in qemu.
[YOCTO #8380]
(From OE-Core rev: d044049362c53681ce1170f74c0802511acd3161)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refresh add-geometry-input-when-calibrating.patch to remove
bashism from it.
(From OE-Core rev: c0b8e1ff40af05b29780164c860c68da35e7fc32)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xinput_calibrator_once.sh uses xrandr to read the resolution but is not in the dependency list.
Busybox is unable to parse the corresponding line, hence depending on bash.
(From OE-Core rev: d2b6e325a00e77e6fbee25f3b46cb73af29f1652)
Signed-off-by: Urs Fässler <urs.fassler@bbv.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Calibration acquires a default resolution of 1280x1024 when running
xinput_calibrator_pointercal.sh, obtain correct screen resolution by
using xrandr to grab user-specified geometry and pass to script
(From OE-Core rev: ce6f15dc3905ab0b061b20cc35fd179fdd9e070f)
Signed-off-by: Jonathan David <jonathan.david@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's not complete, but recipes depending on virtual/libx11 are easiest
to spot, I've long list of PNBLACKLIST for all recipes which cannot
be built in distro without x11 in DISTRO_FEATURES
(From OE-Core rev: 78d269fa9a586e24ef058ba5315c696f15935f56)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
(From OE-Core rev: 2543b14dd0ca13005be0df027543431fc8e882ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the move from meta-oe to OE-core XDG based launched was dropped
without noting it in the commit message, so fix that regression.
Gnome-session will now launch the calibrator again.
(From OE-Core rev: 64e0c8a7585a36964988f2f00ac89eda514d5f7b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
(From OE-Core rev: 006b8a7808a58713af16c326dc37d07765334b12)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* 30xinput_calibrate.sh is calling ". /etc/formfactor/config"
breaking Xsession for images without formfactor
(From OE-Core rev: 181a46da02d6ae74a8d1b5d06c547e0d213767ea)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
People using xserver-xorg that need to calibrate their touchscreen
devices would also need meta-oe. Bringing the recipes to oe-core will
make it easier for them.
Aditionaly:
* drop xterm RDEPENDS. Terminal is not needed to run the menu item;
* change xinput_calibrator_pointercal.sh so that it can be run as
normal user: pointercal.xinput is saved to ~/.pointercal/ and it will
be used when the system boots;
* have the calibration run through an Xsession file;
* remove the systemd service since calibration is run by Xsession;
* do not install pointercal.xinput if it's the default one;
[YOCTO #4416]
(From OE-Core rev: 4ecafd89dbf41cbd53e6db32678fe625c06caaab)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Diego Rondini
Maxin B. John
Urs Fässler
Jonathan David
Martin Jansa
Richard Purdie
Koen Kooi
Paul Eggleton
Jackie Huang
Laurentiu Palcu