Pass the correct callback name to the connect method.
(Bitbake rev: d2b9167a7b0eb3fcb31d64f915beef41aac659a5)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once an image build has been performed the selected_image variable would
prevent the package only build choice being triggered - by setting the
variable to None on reset we are able to perform package only builds after
an image build.
(Bitbake rev: 705156e2812afb288632f01416fcbbf9add26bee)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The different code paths for package vs image builds have lead to some bit
rot in the package only build and an incompatability between package only
builds and the build again mechanism.
This patch unifies the code paths and fixes build again for package only
builds.
Fixes [YOCTO #1480]
(Bitbake rev: ab6c63f35739c30df0e8a9d0f1ae982b96e538ed)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When disabling the toolchain w/ headers checkbox in an early commit I
accidentally disabled too much code. This re-enables adding the custom
response handler to the Preferences dialog which triggeres a reparse of
the metadata when appropriate preference changes are made.
Fixes [YOCTO #1479]
(Bitbake rev: bdbd724e806c9ca69cc1508bac7ec0a2dce95543)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user saves their recipe based on an existing image type, loads it
in a newly run hob instance and clicks bake they should not be asked about
building packages vs an empty image up.
Partially addresses [YOCTO #1468]
(Bitbake rev: f4be83aae77a713e2b5a2d094651639b6e641031)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't matter if we can't remove the temprorary file, for some reason,
so catch the exception and ignore it.
Partially addresses [YOCTO #1468]
(Bitbake rev: 4394e38b038e1bc9845adf01d73363157d98c96d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to check the BBPATH and BBFILES are set correctly each
build when running multiple builds for one launch of the UI.
Partially addresses [YOCTO #1468]
(Bitbake rev: 39ed18e70e9f3a13b522b4ea02bf6f4bdb7de89c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems we have a race whereby the image_dir variable may not be set
before it's tested for, since the variable is always the same set it in the
initialiser.
Partially addresses [YOCTO #1468]
(Bitbake rev: 09f5aed2edb0b8f4a6570e1041b5db66cf2d17cc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some internal lists were not being cleared, resulting in incorrect
program flow on the second build, causing a structure to be accessed
incorrectly which resulted in a segfault.
Fixes [YOCTO #1332]
(Bitbake rev: 71ac7fda51ed80e9ef6d1a3bca653683893e4770)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you don't clear out files_to_clean after the files get deleted and
then you run a second build, it will try to delete the files from the
first build and you will get a "No such file or directory" error.
(Bitbake rev: 069d85cde01d14f8da31ad5cbd843a4d99628d42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's felt that the stability of package deselection is not sufficient for
the upcoming release and thus package removal should be disabled.
I'd actually like to see this patch, or its effects, reverted as soon as
the release bits have been frozen so that this issue can continue to be
worked on.
(Bitbake rev: 73b6ff4654d10baae59d83e8568d58d989e99dd7)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buildstats handler causes an exception with: "'NoneType' object has no
attribute 'startswith'" early a build via hob, leaving a glaring red row
which means nothing to the user.
Mask this error until such a time as we have opportunity to correctly
diagnose and fix the root problem.
Workaround fix for [YOCTO #1433]
(Bitbake rev: b0cce5b52a20c0dad5ec0c4053f437cae89b6137)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generic meta-toolchain-sdk we are currently building when this option
is enabled is likely unsuitable for the majority of images built with hob.
Remove this option from the Preferences UI until such a time as we can
correctly implement this feature to include the library headers for the
selected packages.
Addresses [YOCTO #1302]
(Bitbake rev: 3157967d08266b8d1ac563ba609ac3027b60d040)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob requires pre and post configuration files to store configuration values
in, whilst this should (and will) be fixed long-term for so long as we
require these files we should alert the user should they run without them.
Fixes [YOCTO #1383]
(Bitbake rev: bb3e9113074ea1254aa03a247a1a1070682df9c8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no value is set for DISTRO the defaultsetup policy is used, reflect this
in the UI by having defaultsetup selected in the Distribution combo when no
other DISTRO is set.
(Bitbake rev: 126267c545ede65042959d134ea75c0345577747)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to set various variables *before* parse begins, the simplest way
to ensure this is to use a pre configuration file for the relevant
configuration entries.
This series adapts hob to use both pre and post files to store its
configuration. Any variables which affect initial parse are set in the pre
file and all others in the post file.
Unfortunately this requires hob related code to have even more hard-coded
data as to what is relevant but this is the simplest way to solve issues
with variables and parse order at this time.
Addresses [YOCTO #1281]
(Bitbake rev: 02ab0e11d8dd42f5ca440b3d8d2073e23f55113a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than trying to iterate the model to find whether the item is already
included and then iterate the model again to find the items path attempt to
find the path first and if the path is found test whether the COL_INC of
the row is set.
(Bitbake rev: 82845569c37591f6b097b9db071484f8171a39ea)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cheaper to set COL_INC to True regardless of whether it's already set.
(Bitbake rev: 12c6f98ba7a68baeeaee00594d910e1be8d55d87)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than calling get_path() for each iterated value use the get_value()
method to lookup the COL_NAME value and only call get_path() for a match.
This should save some time by potentially removing N-1 calls to get_path()
from the loop.
(Bitbake rev: d2450536269996147a22d6eafbdf72aa62afa4f6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't add y to x's COL_BINB if x is in y's COL_BINB - prevent circular
dependencies.
Further this patch improves the variable naming to make this code easier to
follow.
Fixes [YOCTO #1423]
(Bitbake rev: 01ef2ab0d201f3cb3666462558c9cf485592e04f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the same vein as a similar, earlier, patch where I missed the second
loop which modifies the binb column.
Fixes [YOCTO #1420]
(Bitbake rev: 6ad1103b5fd592afa9ea03ef5a0d706604cc0e0f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add another item to the right-click menu enabled for log messages to copy
the message to the clipboard.
(Bitbake rev: 419b52e832f506504778d4d5957d1e77477bb513)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't make sense to be able to modify the preferences and add/remove
layers whilst a build is in progress - disable the relevant menu items once
the build has started and re-enable them once the user has returned to the
creation view.
(Bitbake rev: 0423587db09f6f28cf9d801f5657a84157f42dbe)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes an embarassing typo which meant the method actually returned a
list of packages which didn't depend on the passed pn.
(Bitbake rev: a17334e85869bf78d63df1b2336d68980a0b359f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was actually broken with recent changes as the values were never
persisted to a file (meaning they were unset on the server at reparse
despite the UI indicating they were set).
However, I've chosen to remove the 'feature' as pegging a users CPU without
them asking to use high thread counts seems a little offensive.
(Bitbake rev: 27dcf245abf3805be47894773406392fdf055e48)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If IMAGE_FSTYPE is empty and the user has opted to build an image warn
them and prevent the build.
Fixes [YOCTO #1267]
(Bitbake rev: 023edbe6d04f25c7e0e7b615eb06cd3727c665cb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were setting the value as a list when a string is expected
(Bitbake rev: fc3bb3a4f04f64c6d47c7bf040b7522e9204a458)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These methods are expected to return lists.
(Bitbake rev: 4e101de9034c20dfda0bb851e84f4315335620f6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the models new get_selected_pn method to return a list of PN's for the
selected items and pass that for a package only build, rather than passing
a list of package names (which buildTargets can't handle).
Fixes [YOCTO #1385]
(Bitbake rev: c969857c7f5963098e6584803eafb4e2be0eea46)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we've switched to packages in the model, rather than PN, it makes
sense to add an extra field to store the PN of the package.
This patch includes a convenience method to retrieve a list of selected PN's.
(Bitbake rev: cf79424592a81378de5edad11cf6c4f427c94bcc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user hasn't made any selections inform them that they need to do so
before clicking Bake.
Fixes [YOCTO #1384]
(Bitbake rev: e176dcf637da2d0105a4361a46d5df5238e3b8ce)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier for the user to determine what the effects of a
removal may be, further it means we no longer need the find_alt_dependency
method which could be a fairly time-consuming method depending on the size
of the contents table.
Partially addresses [YOCTO #1365]
(Bitbake rev: 91d1f5f5a44c80e6702221509e2e9aadbe05bcc0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure the dependency list is uniquified, doesn't include self references
and further doesn't include -dev references.
(Bitbake rev: 70aebebc3867d52e460355667e711c7c6dcd50ce)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Relying on the count() method of Str to determine whether the string
contains a substring is error prone purely because the return value doesn't
strictly convert to a Boolean value.
To that end take the more pythonic approach of using the in operator (foo
in bar) to check for the substring.
Further, add a helper method for the common case of testing whether a pn
is -native, -cross or virtual/
(Bitbake rev: d7768cefcddd59a5102d7e9b67e4416bf8603f55)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we receive the CacheLoadComplete command we need to ensure the
progress bar is hidden as we can't expect the ParseComplete event, where
this would usually be done.
This patch makes the Goggle UI usable again.
(Bitbake rev: 64dfc574c12d882761e4958c8b1881cd47a87e0d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change to the message module to remove custom logging domains
resulted in an increased number of messages being displayed in the
running build view, ignore all messages lower than log level INFO.
(Bitbake rev: a12da000a8e4138fbdfd77f9c49b11fc69a315e1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to check if the name ends with -native or -cross as path will be
None in this instance.
(Bitbake rev: bca739cdf55ba2a1c5e372e512d4f088345f245f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ignore names that include '-cross', rather than just 'cross'
(Bitbake rev: 06abfc9caf7f237a6bb762fb3ae9f3dec99688ca)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the item_name contains virtual/, -native or -cross it won't be present
in the model. Return None early in this circumstance rather than iterating
the entire model and still returning None.
(Bitbake rev: aeef5a4b3999bd924e89e7738efe24f80ae94fd0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now the hob UI has only contained recipe (pn) level targets in the
data store, this patch switches to including package level information.
This is slightly slower in all model related cases (more entries) but gives
much more flexibility for image customisation.
(Bitbake rev: 049927e99c8d1db7273fbd179b2614bd2ea9403b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment it bugs me a lot that we only have one effective logging
level for bitbake, despite the logging module having provision to do
more advanced things. This patch:
* Changes the core log level to the lowest level we have messages of
(DEBUG-2) so messages always flow through the core logger
* Allows build.py's task logging code to log all the output regardless
of what output is on the console and sets this so log files now
always contain debug level messages even if these don't appear
on the console
* Moves the verbose/debug/debug-domains code to be a UI side setting
* Adds a filter to the UI to only print the user requested output.
The result is more complete logfiles on disk but the usual output to the
console.
There are some behaviour changes intentionally made by this patch:
a) the -v option now controls whether output is tee'd to the console.
Ultimately, we likely want to output a message to the user about where the
log file is and avoid placing output directly onto the console for every
executing task.
b) The functions get_debug_levels, the debug_levels variable, the
set_debug_levels, the set_verbosity and set_debug_domains functions are
removed from bb.msg.
c) The "logging" init function changes format.
d) All messages get fired to all handlers all the time leading to an
increase in inter-process traffic. This could likely be hacked around
short term with a function for a UI to only request events greater than
level X. Longer term, having masks for event handlers would be better.
e) logger.getEffectiveLevel() is no longer a reliable guide to what
will/won't get logged so for now we look at the default log levels instead.
[YOCTO #304]
(Bitbake rev: 45aad2f9647df14bcfa5e755b57e1ddab377939a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to unset the reload_required variable once we've triggered a reload
so that we don't cause a reload each time the preferences dialog is shown and
dismissed, regardless of whether anything has changed.
(Bitbake rev: b3ad7acebfad3063c3364f4492f53b25bf53cf81)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Configuration files are written in several places, this refactors the code
to use a common method.
(Bitbake rev: 2843645755abb736220d7404dc6e853929093ff9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The API has changed from just a reparse call to a reset call followed by
a reparse call.
(Bitbake rev: c828ba571c3cf27d1bbd65184e287c45ef64de89)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix thinko - the squish method returns a uniquified list, it doesn't modify
the list in place. Therefore the call to squish() was useless as its return
value was never assigned.
(Bitbake rev: 93bae8f223cdeb7b7e31c309b5d785b97ae1c2ac)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two similarly named variables in the mark() method resulted in the wrong
variable being used in a couple of places. This patch adresses this in
several ways:
1) Renames the variables to be less similar
2) Uses the correct variables
3) Adds some coments to document the methods intent
Partially addresses [YOCTO #1355]
(Bitbake rev: ba9f2fe496eec0a221b563ffc9bb76eca592192f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running bitbake in -k mode, the last command might succeed but we
still need to preserve any previous failure codes.
(Bitbake rev: 3ad3a53545b37ee8b26b22f4a0e00b19615b449a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a No Provider error is shown we need to set the exit code to
show an error occured too.
[YOCTO #1322]
(Bitbake rev: 4d4e01aa3e38d809617e8c1bbaa081182a2308a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data-generated and model-updated signals are different, the model
should only be accessed *after* the model-updated signal. Move code
setting the image combo's backing model to the model-updated callback to
ensure the combo is accurately set when changing the machine with an
image selected.
(Bitbake rev: 46953d3b4595667935d43fe7b20264ae0efd1bdf)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible to trigger an infinite recursion when removing a package
where many of the dependencies share their dependencies. Prevent this by
keeping a list of removed item names and only removing the item when it's
not in the list.
Addresses [YOCTO #1319]
(Bitbake rev: 0ed58f28e869cceeefa930a3f1f46c5f3e9ffe21)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The HobEventHandler passes events on to RunningBuild when a build is in
progress. This patch resets the HobEventHandler to handle events when the
build is complete.
(Bitbake rev: 3d66d4e64a6352c01662a24ee957eddcd3fde7fc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Find returns -1 if the substring isn't found, so checking for the
Truthiness of the return value is insufficient. An INCOMPATIBLE_LICENSE
value which only includes GPLv3 will cause find to return 0, for example.
Fixes [YOCTO #1320]
(Bitbake rev: 28c71e63355ca94402a9049b8a07046e7b460026)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Emit the generic build-complete signal when a command fails with an exit
signal enabling the UI to update itself accordingly.
Addresses [YOCTO #1265]
(Bitbake rev: 25ec13075855f7e321a9763682a8cd4ca09203cd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Addresses the second part of [YOCTO #1311]
(Bitbake rev: d790386112b0beb444713a12d766bd4bd3441f56)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In b947e7aa405966262c0614cae02e7978ec637095 Bob started to introduce code
for a right-click menu, whilst most of the code is non-invasive it does
enable the editable property of the gtk.TreeView which can be confusing.
This change adds a readonly parameter, defaulting to False, to the
RunningBuildTreeView which if True will prevent the editable property from
being set.
CC: Bob Foerster <robert@erafx.com>
(Bitbake rev: d1d6bfab1789d8c0a4faa109bcc06b3cefe62620)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new sequential option of RunningBuild to ensure this.
Fixes the first part of [YOCTO #1311]
(Bitbake rev: 972769e6362ea3cf35c8fb7cdfbb147758d0a2f2)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In b947e7aa405966262c0614cae02e7978ec637095 Bob changed the behaviour of
the RunningBuildModel such that the items are added to the model in a
non-sequential order.
The messages in the view being listed out of order from how they are
received is undesirable for users of the hob UI, therefore this patch adds
an optional sequential parameter to the RunningBuild initialiser which,
when set to True, will always append new messages so that the order shown
in the view is that the messages are received in. The parameter defaults to
to False such that the behaviour added by Bob is preserved.
Partially addresses [YOCTO #1311]
CC: Bob Foerster <robert@erafx.com>
(Bitbake rev: b16663e1919fddbf63d0ca7f9ad3ffdc7d1121fd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move temp directory handling into the HobEventHandler and clean up the
temporary files on program close.
Fixes [YOCTO #1307]
(Bitbake rev: 1009ca570a750a00b0e60afcc30ead070c7b310a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When adding a layer fails try to explain why to the user.
(Bitbake rev: 2f7eadfdd710f84a299d6fc7be67ddb089f03ecc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use different return types when adding failed versus when the layer is
already enabled.
(Bitbake rev: 906854d75a12c8752efb1e4065eaf1a10b191612)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a CommandFailed event is seen emit a signal with the error message.
(Bitbake rev: 15cc4fe5051dcb6ac5915e10228b5f3d3ed845bd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we receive the fatal-error signal from the handler display a dialog
informing the user of an error and displaying the error message. Dismissing
the dialog quits the application.
Fixes [YOCTO #1279]
(Bitbake rev: 04dbd80bbc9ffe2a566b8cc488f0feebadcdde60)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cooker encounters an error we're unable to proceed so emit a signal
so that UI's can notify the user and exit.
(Bitbake rev: b6f6edd5090e933ac97a65f93ea9d1b255fca811)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prevent the busy cursor being shown after hob exits if quit is called
whilst the busy cursor is set.
(Bitbake rev: 7b977ff222d4a318efabd0ca5f37fa03b9acb996)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some (namespaced) custom variables to the configuration file for sake
of this UI.
(Bitbake rev: c9dd2592434338bdddb3cc6f42e760c86fa9e6bb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. reflect GPLv3's presence in INCOMPATIBLE_LICENSE value in the UI
The hob UI currently only supports GPLv3 as a value for
INCOMPATIBLE_LICENSE but doesn't properly reflect whether the value is
already set. This patch rectifies this.
2. don't stomp over other INCOMPATIBLE_LICENSE values when disabling GPLv3
In case the user has other values set for INCOMPATIBLE_LICENSE we don't
want to overwrite the value, we want to modify it.
Fixes [#1286]
(Bitbake rev: 68b992922bc7148d657a1c706c6acc67812a87c0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Nothing PROVIDES" errors often come up when a recipe has been skipped
for some reason, and therefore it is useful to print out that reason
information when showing the error so that the user understands why the
error has occurred.
Given that we already feed the reason information into the skiplist for
various situations (COMMERCIAL_LICENSE, COMPATIBLE_MACHINE etc.) this
should now output a useful error message for skipped recipes.
Fixes [YOCTO #846], [YOCTO #1127]
(Bitbake rev: 6765218430e31c165888f26fbc75023c89a6eab2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
reload_data after package format change to make the change take effects in
next build.
Fixes [YOCTO #1287].
(Bitbake rev: fb47c7452455f3f8d943b21dd61300ec55eea141)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The signal handler of the 'Base image' combo was still connected during load
such that updating the UI to reflect the loaded base image triggered a change
of the model. Fix this by disconnecting the signal handler when updating the
displayed 'Base image'.
Fixes [YOCTO #1282]
(Bitbake rev: 58036a79cb79d1dff307e2cfed0e684493178507)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mark() method, which removes dependent and rdependent items, is overly
aggressive removing items which are actually required by user selected
items and then causing a removal of those items. Because the data
structures used are not fine grained enough to do more intelligent
dependency tracking the simplest "fix" is to track removals which are
marked as "User Selected" and re-add those (and therefore their
dependencies) once the aggressive removal is completed.
Because the aggressive removal already ignores images and tasks this should
make the removal behave as expected though certainly leaves area for
improvement in future.
Fixes [YOCTO #1280].
(Bitbake rev: 1e1055262450de994202fc3e5943b8b19f628681)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
use the correct variable userpkgs instead of packages during reload saved
bb file that contains user customization.
Fixes [YOCTO #1289]
(Bitbake rev: 2650be190afc05f9472aca8b11af99205a342838)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method needs to find an included item anyway so rather than iterating
the entire model and checking the included status of each entry iterate
over the contents gtk.TreeFilter.
(Bitbake rev: 79bdd501075ff5164a8ee673a6a2a0e402978ae5)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building an image based on an existing image we need to correctly
handle removals from that images package set. Do so by testing if any of
the items brought in by the base image are removed and, if so, building
an image from scratch with all of the selected packages included.
Fixes [YOCTO #1232]
(Bitbake rev: 812ead4900714545850698d8ce29194f4ee8db0e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables a user to build a rootfs containing only the selected
packages without having to have first selected a 'Base image'.
Fixes [YOCTO #1239]
(Bitbake rev: 05c82da31a69c910e72b58b07afcd9fca8c55479)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the combo is created before its backing model it's common for the combo to
be drawn at its minimum size and then grow the first time the user activates
it. This slight ugly patch forces the combo to be resized as soon as the
model is associated so that by the time the user interacts with the widget it
is less likely to change size.
(Bitbake rev: 65819447ccc96ae2af8d42cf3a31769ef3d2d26e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'View Log' button is potentially confusing to existing users of the
system who may be expecting to be shown the on disk logs of the build.
Instead use 'View Messages'.
Addresses [YOCTO #1222]
(Bitbake rev: 105bfe3562235fb586be4b4179bb34b2e94ef234)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to open the deploy directory should only be shown if the build
completed succesfully.
(Bitbake rev: d947f9880c2205be66fbd61cf7d3728275979a56)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use the buildTargets command to ensure dependencies, such as
native tools to build the rootfs, are correctly included. This patch
achieves this by modifying BBPATH and BBFILES to include matches for the
location of the generated recipe file and reparsing the metadata before
calling buildTargets.
Fixes [YOCTO #1228]
(Bitbake rev: 5840d59098141e773c12bea8ed8d9f4f1a706132)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrate reparseFiles into the run_next_command() method rather than calling
reparseFiles on the server and immediately calling other methods.
(Bitbake rev: 20f7218992cfe18f1d3dcea53f2e5a7bf96346db)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command_map was never a good idea, what's implemented here is a
fraction less ugly but a significant factor more readable and therefore
easy to maintain.
The method implemented in this patch also has the advantage of not being
static meaning we can determine the desired runCommand arguments
dynamically at call time.
(Bitbake rev: 8b11c68ffcda355d0ba49cfc27790d245192ae24)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preferences UI to set the image output type only supported setting a
single value whereas it's common practice, particularly for those making
use of the ADT, to set multiple values. This is also the default in Poky.
This reworked preferences UI dynamically generates check boxes for each
available image type and sets an appropriate string representing all image
types when checkboxes are toggled.
Includes fixes for [YOCTO #1273]
(Bitbake rev: f7f68847dd165f2ad0f39011db4ebfef3ae73f42)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't have a good handle on a sane cap value so just set it to an
arbitrary, but reasonably high, number. Once we have some more numbers on
values for number of threads and make parallelism we can integrate the
algorithm into the GUI.
Addresses [YOCTO #1266]
(Bitbake rev: 31274e78eab502f5eb9f6079897644b535d31dd1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a user added the same layer more than once the underlying bblayers.conf
file would not have multiple entries but the UI would show an entry for
the layer for each time it was added. This patch changes the Configurator
to return None values if the layer wasn't added to bblayers.conf and the
LayerEditor to only update the UI if non-None values are returned.
Fixes [YOCTO #1275]
(Bitbake rev: 9c59baa4da3c863ebc412a56ffd8dbd7a8ffeb60)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When resetting and clearing all selections the searched for term is no
longer the selected row in the packages list, clear the search entry to
prevent cognitive disconnect.
(Bitbake rev: 4f86f5763ecf7f3a9673a9b18e96042e9387699b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>