For builds that don't use gettext, config.rpath may not exist in the target
datadir. This change uses the native directory where it will always
be present due to gettext-minimal-native (which allows us to autoreconf
recipes using gettext even if we don't have gettext built).
(From OE-Core rev: 0ea24447842e6b76ccfee0881f557e1a82e89ef1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the link is absolute then we might end up reading from a host binary
or a nonexistent path, neither of which will produce useful results and
may result in objdump failure and python backtrace spew. If the link
does point to a binary within the installation root then we will scan the
pointed-to file at some point anyway so there is no need to do it again.
(From OE-Core rev: 91769af1c1175ac9bb43d16d05fb1c8736dd9287)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various different QA checks are based on essentially the same data from
the ELF program headers. Calling objdump to extract it repeatedly is
inefficient, particularly if the shell is involved. Instead, let's
cache the output from objdump inside the qa.elf object and allow it to
be reused by multiple tests.
Also, using objdump instead of scanelf to check for bad RPATHs (in the
same way that the useless-rpaths check was doing already) allows the
dependency on pax-utils-native to be dropped.
(From OE-Core rev: bf19eeb9f65e91bf2b5d89e7c0b099c55d7c15ff)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise it will fail if these two directories are not the same.
(From OE-Core rev: 491823fdc65d124093f1fed5a56173917443e1d6)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext m4 macros don't use the usual versioning/serial mechanism used by
aclocal. It therefore won't update them over and above any local version of
the macro. Equally, we don't run gettextize due to it doing slightly crazy
things to the build.
When we put the aclocal directory as a -I option to aclocal, if this was
found first compared to any recipe provided macros, the correct version
of the gettext macro would still "win". With the switch so correctly override
the system directory, older recipe provided macros may get used.
This patch manually removes the problematic m4 macros in the case we're using
gettext and need to use the correct m4 macros.
This patch also always ensures the gettext manipulations happen, even in the
-native case since missing or stale gettext files could cause build failures.
(From OE-Core rev: e9645d2bbeabaa5251d49edd659ab320fd66d0ee)
(From OE-Core rev: 841ea3c1c18e50e77fccbd5f44d6a79a50913b67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous steps taken to address races over the aclocal macro directory and the removal
of files hasn't been sufficient since aclocal still looks at that directory as part of its
default search path. This patch passes the aclocal-copy directory into aclocal as its system
directory, removing any chance of it accessing the original aclocal directory.
Hopefully this should therefore fix the race issues once and for all.
In order to do this, cp-noerror needs to not error if the directory already exists.
Its also been noticed that aclocal defaults to using STAGING_DATADIR_NATIVE even when
building for the target. Only using the target directory would cause errors such as
missing pkgconfig macros (since we only depend on pkgconfig-native, not pkgconfig).
This patch processes both sets of macros maintaining existing behaviour. At a future
date we could look into potentially optimsing this.
[YOCTO #3216]
(From OE-Core rev: ad29b331e0d61708e68ef772cdb19154956fa67e)
(From OE-Core rev: f362cc419e5a480acd16c71c802636dbedc932d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The network tests in sanity.bbclass can now be trigerred explicitly
by firing the NetworkTest event. This is part of the fix for bug #3026.
[YOCTO #3026]
(From OE-Core rev: f1f43d55dbb020a0145c58731d4259fd906d9d1e)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've noticed failures on the project autobuilders where a shared sstate
directory is used across multiple builders and the clocks become skewed.
Most of the time this causes harmless building but if this happens where
an environment is changed (make install vs make in qt4-x11-free for example),
the build can fail.
This avoids modification times in the future and should make builds safer
in shared environments sstate was designed for.
(From OE-Core rev: 8f1bdb4f4afd7f5f4c121be8ba82f4675f73e300)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This tests for /usr/libexec as we are moving things to /lib/.
the test is ignored if the distro defaults to /usr/libexec.
Currently this test will be disabled by default since the current
value of ${libexecdir} is "/usr/libexec". Also this tests needs
to be enabled in the WARN_QA list.
[YOCTO #2915]
(From OE-Core rev: 4c60c2779dde6962f342f9c9b61713cf2d3a564c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you wish to change the install/unpack method of the sdk, this can now be done by making
your own create_shar method, and setting a SDK_PACKAGING_FUNC variable to your
new create_shar function.
(From OE-Core rev: 3955c8eced352226bb4c9ceb710dbe02474b9024)
Signed-off-by: Thomas Kristensen <thkriste@cisco.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since e3d7890cac or so, base.bbclass has
considered invalid LICENSE settings to be a fatal error. This means we
will never see them so there is no point checking for that.
(From OE-Core rev: e2d71503847f72f55666143a2a320925838fd26f)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's sometimes useful to have this function available to recipes which
don't wish to use module.bbclass for whatever reason.
(From OE-Core rev: 7632b44e7f487180811d47fbe9c29aa8e58868a2)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-modules mechanism is something of a historical relic and it isn't
entirely clear that it has a great deal of value nowadays. Also, it causes a
problem when building a read-only rootfs since update-modules itself refuses
to configure offline.
Allow DISTROs to circumvent this whole thing by declaring (via DISTRO_FEATURES)
that they don't wish to use update-modules. This is backfilled for existing
distributions and will have to be marked as CONSIDERED by those who actually
don't want it.
(From OE-Core rev: 14bf8ed115453077b4d4042b4b70ed6b3bca2a9f)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There seems to be no benefit in having them be different and this
appears to cause a certain amount of confusion about paths for
the native modules.
(From OE-Core rev: 3926a45a26c2d23d9c2fc9c3956f780f607ec7a4)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just because a recipe uses pkgconfig, it doesn't mean that it's -dev
package should RDEPENDS on pkgconfig. I can understand the thinking
that lead to this but it makes sense to be able to install the package
when pkgconfig hasn't been built.
Currently you can also get failures where pkgconfig wasn't built yet
a -dev package is included that depends on it leading to rootfs failures.
I considered making this a RRECOMMENDS but it should probably be an
RSUGGESTS at best given the tenuous pkgconfig requirement any given
-dev package has.
(From OE-Core rev: 8f41b69578eef5ea750e8f93dcd9d37375ce7d88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The virtual-locale-* packages are provided by libc which may or
may not have a matching locale for any given recipes's provided locales.
Certainly, we shouldn't get a failure if the locale package isn't
available.
This patch therefore makes the dependency optional rather than
required, allowing the locale packages in question to install. This
resolves errors like:
virtual-locale-eo is needed by bash-locale-eo-4.2-r5.i586
virtual-locale-en+boldquot is needed by bash-locale-en+boldquot-4.2-r5.i586
virtual-locale-en+quot is needed by bash-locale-en+quot-4.2-r5.i586
(From OE-Core rev: 2be67f95abaa7e8655a1ca8f4ffe66b3e099a650)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The names used to generate the binary-localdata packages need to match the location
the dependencies are added. In one case the dash replacement is made, in the other it
is not leading to packages which cannot be installed:
eglibc-binary-localedata-af-za.iso88591 is needed by locale-base-af-za.iso-8859-1-2.16-r22.i586
eglibc-binary-localedata-cs-cz.iso88592 is needed by locale-base-cs-cz.iso-8859-2-2.16-r22.i586
eglibc-binary-localedata-ru-ru.koi8r is needed by locale-base-ru-ru.koi8-r-2.16-r22.i586
eglibc-binary-localedata-pl-pl.iso88592 is needed by locale-base-pl-pl.iso-8859-2-2.16-r22.i586
eglibc-binary-localedata-hu-hu.iso88592 is needed by locale-base-hu-hu.iso-8859-2-2.16-r22.i586
eglibc-binary-localedata-de-at+euro.iso885915 is needed by locale-base-de-at+euro.iso-8859-15-2.16-r22.i586
eglibc-binary-localedata-sv-fi.iso88591 is needed by locale-base-sv-fi.iso-8859-1-2.16-r22.i586
This fixes things so the names are consistent.
(From OE-Core rev: 17e1bfe2b1260add9749b5ff73c72d57c0215fdc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also ensure that we always cleanup the temporary install manifest files,
some of them will cause problems if they exist in multiple install
attempts.
Finally verify that the lists remain uniquely sorted otherwise the
complementary install may install the same files numerous times,
triggering a failure.
(From OE-Core rev: 4f2a290cbcc6c21afbb2a6e6148efdef4d135b41)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids errors where gcc/binutils get installed to the native sysroot
in the same location for multiple package architectures. Ultimately making
these native recipes with ${PACKAGE_ARCH} appended to PN will resolve this
but hide the warnings until this gets sorted out.
Also hide the python and docbook catalog warnings since they're known about,
nothing to worry about and we'll aim to clean them up properly in the 1.4 cycle.
(From OE-Core rev: 5bae58a5b59c04d8947f4842f19837a914c29b52)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, path components like // could break comparisions with the whitelist leading
to warnings being displayed to the user unintentionally.
(From OE-Core rev: d3c46ca56fab2f07bf16b61514f30765543a8747)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some packages use M4 variable from environment and sometimes
its hardcoded to /usr/bin/m4 if not found in environment. Lets
define it such that it is picked from path
(From OE-Core rev: 06c5593d15f206458b9a5b45ed1229abfee16e95)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the RPATHs in 32bit toolchain binaries to be relocated
properly, chrpath >=0.14 is needed.
[YOCTO #3161]
[YOCTO #3201]
(From OE-Core rev: 71c71b972100803d33fbb062a237e8a15167387b)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the distro check functions for the change of nativesdk
being a suffix to a prefix. Also added crosssdk as another
case for converting to PN for matching in the distro_tracking
(From OE-Core rev: ae9dbd0e1e26ba2b35cbd08ec731aee62adedc23)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to iterate over the dictionary pulling out the values, not take the top
level keys. If we don't do this, we end up with dependencies on the values of
PACKAGES, not library dependencies.
(From OE-Core rev: 7219bca11f554fbe2ed30f1537491987d65e9316)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, circular dependencies are found when attempting to build
multilib versions of qt4 (or bitbake world in a multilib enabled build).
(From OE-Core rev: b2e8cc5ae227656211fb7f32260e7dc4e2fb556e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Versions earlier than 0.14 can't cope with 32 bit binaries on a 64 bit
system and vice versa. This results in problems for certain SDKMACHINE
combinations on certain hosts. By ensuring we build
chrpath-replacement-native we avoid this problems and the binaries work
correctly.
[YOCTO #3161]
[YOCTO #3201]
(From OE-Core rev: f89bced26de055817100d0b0e03094b031fcfd48)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This converts the option to maintain the existing behaviour unless the option is
specified. We do specify the option during the builds themselves to ensure what
the users expects is built.
(From OE-Core rev: 0cc479699fe885049625d54c712b500c1b719e75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test for network error in sanity.bbclass was negated.
(From OE-Core rev: 9fcd0866f0e30a50182434f6bcae13bf9575807f)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.utils.explode_dep_versions function has issues where dependency information
can be lost. The API doesn't support maintaining the correct information so this
changes to use a new function which correctly handles the data.
This patch also fixes various points in the code to ensure that we do not have any
duplicates in things that use explode_dep_versions.
A new sanity test to test the contents of the R* variables is also added.
[Some changes from Mark Hatle <mark.hatle@windriver.com>]
(From OE-Core rev: 16a892431d0c0d03f8b561b92909cf2f11af4918)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
People keep copying this code and its confusing and unnecessary. Remove the
bad examples to try and stop this happening.
(From OE-Core rev: 48aa4b00cfb7f01195c6d20b7ba660715fe792ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In deb and ipk, < means <=, while > means >=... there is a different
operator << and >> that means < and >, so we map them when constructing
the packages.
(From OE-Core rev: bbcc78d8ff03725ce5b3b65ce24025c3da45f2ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the STAGING_DIR_KERNEL is set in the multilib.conf, then it may be
set incorrected. The evaluation happens before TMPDIR and LIBC are
defined in other components.
Moving the definition process to the multilib.bbclass ensures that
everything has been loaded before it is set.
(From OE-Core rev: 6bd87edc383b40e300b0ef4bf851c39b698305cd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors. Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.
(From OE-Core rev: acc988272b4e74a9ad1e6da5af5b2d208584197b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures consistent build results and avoids build failures when compiler flags
change for example.
(From OE-Core rev: a5ff8396cad130f809f8f8da49bb38e6f80f923c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_package is a machine specific task at the moment due to packagedata. This means
do_package tasks and their dependencies rerun between different machines
with various duplicate file installations. There are plans to fix this but they're
too invasive before release.
This patch relaxes the whitelist for sstate duplicate file detection to account
for this. Post-release, we re-enable stricter settings once do_package is not
machine specific.
(From OE-Core rev: c858259ce1881c6284f1fc2790c225c81e4a751e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This requires the changes to bitbake.conf that allow parsing of
license.conf.
As we should now be parsing license.conf, we can move some globals
out of license.bblcass and into the conf file.
(From OE-Core rev: 03e6a7cd27ed109a011fac09cf04412f87f31c3a)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable mentioned in license.conf is LICENSE_PATH. The variable
used in license.bbclass is LICENSE_DIR. Conforming to what is in
license.conf
(From OE-Core rev: c6e13d9cd26d016ab06e7447b307d413e1331aa0)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we fail a network test, a special flag is set in the SanityChekFailed
event. This helps Hob identify the network error properly and display
a special message to the user.
[YOCTO #3025]
(From OE-Core rev: 7877c4344db89237bba5f9a03342bfd9a03aebbf)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- add check_bblayers_conf bitbake function which does the bblayers.conf
v4 -> v5 update if necessary (every layer should make its specific
bblayers.conf upgrades appending to the check_bblayers_conf function)
- we ask the user to re-run bitbake because we can't trigger reparsing
without being invasive
[YOCTO #3082]
(From OE-Core rev: 03ad4edace5db9c6e15ca776d06d20b7d4e42afc)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit aa66ef6598c84231577d139ec7be413e73fac2b1 since
bdwgc-native fails to build after it. Anything which runs with a
sub-configure will fail after this change. It therefore needs
rethinking.
(From OE-Core rev: f95a9e2c292a1551861220270838cf1eaaba85b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix autotools.bbclass to use relative paths for acpaths instead of
absolute ones. Since absolute paths may cause potential autoreconf
error like:
Can't exec "/bin/sh": Argument list too long ...
This error occurs while building coreutils with long TMPDIR, because
it has bunch of m4 files need to be expanded.
[YOCTO #2766]
(From OE-Core rev: aa66ef6598c84231577d139ec7be413e73fac2b1)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on the previous commit 604d46c686d06d62d5a07b9c7f4fa170f99307d8
(Convert tab indentation in python functions into four-space), the
cml.bbclass was not converted, and in order to properly extend it
with external bbappend's it needs to be converted.
(From OE-Core rev: e4c1c37bb37e9eba635bc0a9308ab593abd299ec)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The platform and platform_extra will be written to /etc/rpm/platform,
the rpm's arch has changed the "-" to "_", so the value in platform
should also be updated.
[YOCTO #3159]
(From OE-Core rev: 9880a5261ca509c69efbafa27cddd9b2b8ca08f0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no initial_solution.manifest in the second build when
incremental rpm image generation, since the initial solution has been
skipped. So we should check it before cat it.
[YOCTO #3128]
(From OE-Core rev: ad17fa82a481ab3c9f17a8338ebad1eb07c0f9d8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Suppress this by removing the unwanted -i.
(From OE-Core rev: 57dcacbd6f35ae2d6b505f044bbefad35da66959)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
(From OE-Core rev: 603daf343ad3f18c8adb799e3625ae2a18d94f56)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current multilib search path code for packagedata is flawed since it
doesn't correctly handle changes in the TARGET_VENDOR/TARGET_OS that
multilib may make. This patch enhances the code to correctly build the
search paths so multilib packagedata is found correctly.
(From OE-Core rev: f50c5d36b2da9b36d56d95a7d89404509a1a3e9b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to split this variable before using it. Otherwise a single "/"
character in the list whitelists every overlapping sysroot file which
was not the intention making the whole thing useless.
We'll start seeing warnings about overlapping files now this is working
correctly after this patch.
(From OE-Core rev: 9e31c748327e92b809330f4ad7b6aaecb2edf559)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
(From OE-Core rev: b744f4cc2912334b8493a89525fd02af8e9b8edf)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Passing the data store will be needed for firing a custom event
for the screen class.
(From OE-Core rev: 5ccff8d44626bfd3d1af2a7f81f0567997277809)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If all postinsts have already been run during rootfs construction then
there's no point in having run-postinsts in the installed system.
Clean it up at the same time that update-rc.d and suchlike are being
removed.
(From OE-Core rev: b260cf9fbeb6f029c1ce45e77edd03968caa8288)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It isn't supported to mix multilib and nativesdk in the same target, so
explicitly skip multilib processing if nativesdk is inherited. As a
bonus this fixes a bunch of related "missing file" warnings from the
file checksum code during parsing because BPN was not correctly stripped
for these targets.
Second half of the fix for [YOCTO #3146].
(From OE-Core rev: d9a1eb5054d487affb94431374a9cb1a735e2122)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need MLPREFIX to be set so that oe.utils.prune_suffix() (as used for
the value of BPN) can derive the bare name from the multilib-extended
name for image recipes. BPN being set correctly avoids missing file
warnings during parse from the file checksum code for (unusual) images
that set SRC_URI, such as build-appliance-image.
First half of the fix for [YOCTO #3146].
(From OE-Core rev: ddec9a1b45159c75e97e92abe9a940268acd84b2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For reasons that are now shrouded in obscurity, autotools.bbclass
has long contained a special heuristic to avoid attempting to run
autoreconf when building autoconf or automake themselves. However,
the wildcard test against PN which is used there is problematic when
trying to build another package whose name happens to start with
"autoconf", and in any case it is silly to do this test at runtime
for every package. The individual recipes for autoconf and automake
can just as easily suppress the behaviour that they don't want by
providing a custom do_configure() method which just runs configure.
(From OE-Core rev: a87db6f8dea71cbb7ead9285ff8af0e28cf75604)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define an ALL_QA variable which can be used to determine which tests to
run. Improve the libdir test to work in the case it is set to raise an
error rather than a warning.
(From OE-Core rev: 069992a502658e8e44b870601e2e189cd9596ec9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check in ${PKGD} for libraries in wrong locations.
Trigger a warning if so.
Eg. Catch recipe installing /lib/bar.so when ${base_libdir}="lib32"
or installing in /usr/lib64 when ${libdir}="/usr/lib"
[Yocto #2038]
(From OE-Core rev: 534fa3a55de19f249583207aaeec58fec8154a1d)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch will allow one to run the installer from another directory
than the one where it's actually located.
Suppose the installer is in /home/user/test/my/sdk and the current
directory is in a different place. With this patch, one can run the
installer like this:
$ sh ~/test/my/sdk/poky-eglibc-x86_64-arm-toolchain-gmae-1.2+snapshot-20120920.sh
[YOCTO #3135]
(From OE-Core rev: 3c7aac33cb63dc63b989db4e9d7389a7f4d3c18d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
[YOCTO #3090]
(From OE-Core rev: 6e4923c0c9b218271fd44d78df9987b5cabb1c03)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
[YOCTO #3102]
(From OE-Core rev: 9e6a25e2e9a7f37c3baa0b2949a43ac4127868da)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes the dependency on a seperate binary which we
don't seem to have. So, use mksquashfs's -comp lzma to
replace that functionality
[YOCTO #3126]
(From OE-Core rev: 8e82713724dfcb40f2ae24a166ec94f50f8b4cd0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RPM does not name it's packages with the Multilib prefix,
but the rootfs_rpm class keeps track of the Multilib prefixs
in a list. Use that list to re-attach the prefix for use with
the license bbclass, buildhistory bbclass will also use this
and make it more accurate between multilib and non-multilib.
Use the embedded "Platform" information to ensure we get all
the correct matching.
(From OE-Core rev: f72abd80b0cc9d27aad2e31ecb548b4ab0fd8f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Use mkdtemp for generating temp dir names
- Use bb.utils.remove for removing temp dirs
- Add comment for explaining the "patch" workaround
[YOCTO #3070]
(From OE-Core rev: fbe9fc4d5ece1e66b03b4c4bce9b7ffad3b5b138)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was reported that the kernel configuration checks for custom yocto
kernels had the following output:
NOTE: validating kernel configuration
grep: /meta-series: No such file or directory
grep: /meta-series: No such file or directory
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded.
which is not inspire confidence in the output of the process.
Completely inhibiting the check is one option to remove the messages,
but that removes the ability see output, which can help move users to
a better or more fully configured linux-yocto based kernel.
To fix this, we have to ensure that the path to the meta-series is
always valid, and that the tools can deal with not all files existing
in the audit directory.
Since custom yocto kernels do not set KMETA (they don't have a meta branch),
we ensure that a default of 'meta' is passed to the audit ('meta' is always
valid), and that kconf_check itself can deal with an incomplete set of
input audit files.
The net result is output like this (using a defconfig with invalid options
for the kernel being built):
NOTE: validating kernel configuration
This BSP sets 19 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/invalid.cfg
There were 1 instances of config fragment errors.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/fragment_errors.txt
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/missing_required.cfg
(From OE-Core rev: 4d1b7dae063ee4c35c426306d0e22f11ce112c72)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if
base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an
unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if
IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So
let's add the round up code after the base_size calculus and it's
comparison.
(From OE-Core rev: 726c1617077da6b49606ac1a2cae64d2d02e6214)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We must use one TMPDIR per process (/tmp/${PID}) so that the patching
processes don't generate the same temp file name (the "patch" program
uses the TMPDIR environment variable for deciding where to create the
temp files).
[YOCTO #3070]
(From OE-Core rev: 16dbf505c4fdd9fe1820d950ab05c8ea99ad7505)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, settle all found licenses into one line and report warning
about missing licenses loudly.
(From OE-Core rev: f015a9eb8265c485da0b20009ba72119035599b1)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial change, do not cut off plus symbol from license name, otherwise
information about package license is corrupted.
(From OE-Core rev: ba53de38e96833ea82ddd0f1e336cd7ddfa0c2d1)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial change, process LICENSE_${pkg} and LICENSE values. This fixes multiple
cases, when license is not specified at all in license.manifest
(From OE-Core rev: 8fd734e6f9159921d0d148c4d5c0fa37c882b21a)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, which improves code perception. Also check for locale
packages firstly, this shall improve performance a little.
(From OE-Core rev: 100e457de4b223defb1a844d3b85af812caf2f79)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, saves space and reduces code line length.
(From OE-Core rev: 0ac50f848cf0f897333cff9340976519fc95fdc4)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
(From OE-Core rev: f15f61af77cc4e52a037f509f8e49e1ea530cf35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can now rely upon the minimum BitBake version having the
SanityCheckFailed event, so remove the code to handle if this is not
there.
(From OE-Core rev: ba17572c9c11efb45a92ba97914ce1f6d84002c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is no valid machine configuration it's almost guaranteed that
the tune checks will fail, so just suppress them in that case.
(From OE-Core rev: 629c585e687cda9290efcffd18dd92fdf16009ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When called with the complementary install option, the first step is to
backup the install manifest so that we can avoid installing items previously
installed. However, this backup process skipped the initial_install portion
of the manifest, causing early install items like libc6, bash, and base-files
to be installed a second time.
Fix this by cating the files to original_solution. This is done as an append to
allow multiple calls to package_install_internal_rpm to work.
(From OE-Core rev: af9fd7566a5de4716a202922f5eabb13a412f2fb)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the image.bbclass is called with arguments, and these arguments are not
"populate_sdk", they will be passed in as the expected GLOBS.
This enables external components and scripting to use the
rootfs_install_complementary code.
(From OE-Core rev: f44c5f227a170290f567d0a0a24baaa870048788)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Appending to EXTRA_SSTATEMAPS is better than just hardcoding a value. Also
add a comment about why this is necessary.
(From OE-Core rev: d4f4a57b8d564d57256017d937ed2eabf94c36ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using a rather error-prone method of looking for output
package files in order to determine if a package got created, use the
.packaged file within pkgdata.
This fixes two separate issues:
* Some packages apparently not being found by this code e.g. all
apm/apmd packages when using ipk packaging.
* Buggy implementation of this checking code which triggered an
exception during the event handler if PKGV was overridden on a
per-package basis (as it is with external-sourcery-toolchain), which
blocked Hob from completing parsing at 99% - fixes [YOCTO #2651].
(From OE-Core rev: 48169c6bc44c546cecaa06207b6c36da558b81f7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows root to login over ssh with an empty password just like
dropbear when the debug-tweaks are enabled, it's important to disable
debug-tweaks for a production system as this will leave open a security
hole!
Thanks to Marc for the settings.
Cc: Marc Ferland <marc.ferland@gmail.com>
[Yocto #3078]
(From OE-Core rev: 13e6aa8bba6ab1ebba1efa23f94af379a8fcb6a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check ${target_rootfs}/etc/passwd rather than
${target_rootfs}${rpmlibdir} to make sure that it has been previously
installed.
* Remove the "--nodeps" when incremental image generation, it should
take care of the dependencies. Still use "--replacefiles --replacepkgs" in
case there are conflicts.
[YOCTO #3047]
(From OE-Core rev: 2b3df2ec7979a49842df172be442a8794fe68fff)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used for the binary package recipe, it's been suggested that it
would be a useful feature to be able to easily take an RPM or similar
containing a software binary from a 3rd party software vendor and
integrate it into an image created by the build system.
* Brief introduction
- The binary pkg can be .rpm, .deb, .ipk and other formats which can
be unpacked by bitbake fetcher.
- Let bitbake unpack the bianry package, just like unpack the source
package.
- Skip the do_configure and do_compile.
- Install the files to ${D}
- Other steps are similar to the source package's recipe.
* Note:
- The "subdir" parameter in the SRC_URI is useful for the binary
package recipe, so I added an example in the comment.
- I have sent a patch to bitbake-devel mailing list to support
unpack the .rpm, .ipk, and .deb files.
[YOCTO #1592]
(From OE-Core rev: 7037f52909b8226d2afed4ac73c902d410afc112)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm can't use the "-" as the arch, which causes problem, e.g., when
MACHINE = "beagleboard":
* The arch should be armv7a-vfp-neon, but rpm only takes the armv7a,
this is incorrect since it is mixed with real arch armv7a.
* The nativesdk's arch should be i686-nativesdk (or x86_64-nativesdk),
but rpm only takes the i686 (or x86_64), this in incorrect since it is
mixed with the arch i686 (or x86_64).
Replace "-" with "_" when rpm package and the rootfs generation would
fix the problem, I think this is fine since it doesn't change the tune's
arch, the package manager doesn't care about the arch's name, but it
needs a unify arch system to avoid confusing. This is similar to what we
have done on the deb which fixed the arch i486, i586 and so on to i386.
[YOCTO #2328]
(From OE-Core rev: fc985f511da86400e4fa7d17555216c12eb51666)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This mirror entry which maps to itself plus a slash, if matched, put the
fetcher into a circular loop until the stack space is exhausted. A patch
has been sent to fix this issue in BitBake, but we should remove the
bogus entry as well.
(Note that this entry does not actually trigger the issue with current
master because the gnutls recipe now uses GNU_MIRROR instead of
ftp.gnutls.org, thus the bogus mirror entry is not matched.)
(From OE-Core rev: 0de1827a9601143b090f751ea702fdb65a936b77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new variable "IMAGE_EXTENSION_live" for Hob to map image type
"live" with real image file extension names.
This is for Hob to remove the hard-coded maps.
(From OE-Core rev: fe0973df7c72b1acec7feae03a4e13c1f49c8b1f)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure this listing is complete. (Comment change only.)
(From OE-Core rev: f9df0be3790ca837e43c41633d17e6ee851cb01d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As nothing in oe-core uses gsettings, it wasn't noticed that the whitespace is
wrong.
(From OE-Core rev: 1c2afda021f7abf88bc08400beba53c603912382)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix borrowed from OE-Classic. This should fix build failures during
do_configure of Qt applications with the p1022ds machine from
meta-fsl-ppc, for example.
(From OE-Core rev: a19fc8e19a6cc6885a1e0616b1f42cc49c8f2c9f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, users can get extremely confused errors since the sanity tests
happen too late (after parsing) and don't see the warnings.
Also cleanup messages about merging configuration file changes to give better
hints at where the updated files may be.
(From OE-Core rev: 7b8a68cda7ef8186e834b39e73ee12a55b33f85b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_validate_branches ensures that the desired SRCREV is at
the tip of every branch that contains the revision. To do this,
it looks for containing branches and processes them.
This processing was mistakenly placed before the check for an
invalid SRCREV, hence a git error message is seen in the log
if a bad SRCREV is used, rather than a clear message.
reordering the checks, and fixing a check for master, ensures
that clear messages are generated in all cases.
(From OE-Core rev: 7e4518bf88af53b09536a3bafcd4c392a094023f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When patches fail to apply, the status of all pending patches should
be exported to the logs and to the user. Currently, a missing export
of GUILT_BASE makes it look more like an internal error, than a 'normal'
patch failure:
| [ERROR] unable to complete push
| pending patches are:
| Patches directory doesn't exist, try guilt-init
With this variable exported, we have this:
| [INFO] validating against known patches (qemux86-standard-meta)
| error: patch failed: Makefile:2
| error: Makefile: patch does not apply
| To force apply this patch, use 'guilt push -f'
| [ERROR] unable to complete push
| pending patches are:
| links/files/0002-makefile-patch.patch
(From OE-Core rev: b2b2512cbc4196fa0f814be3677517dab30e5b52)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides one package group, packagegroup-core-apps-console, which
is usually brought in by adding "apps-console-core" to IMAGE_FEATURES.
Aside from the naming inconsistencies, this is a group of mostly
unrelated packages, none of which are actually "apps". Handling each
one:
* dbus: should mostly be brought in by package runtime dependencies
* avahi-daemon: if you are using packagegroup-base (as all images that
inherit from core-image do) this is brought in by having "zeroconf" in
DISTRO_FEATURES.
* portmap: not very useful by itself; should be brought in by selecting
NFS server/client through other means.
* psplash (or whatever SPLASH is set to): this has been changed to be
an explicit item "splash" in IMAGE_FEATURES. Since this is a fairly
fundamental feature, a piece of code has been added to automatically
handle this for images still using apps-console-core (and show a
warning).
(From OE-Core rev: 592d6e602466628d10704835a7b07d3d713f58e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to avoid confusion with the Qt demos distributed with Qt itself.
(From OE-Core rev: dbbcc0cb9d2cbc66027c800075b94eb9b7110a00)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable tasks other than do_package* (similar to how image.bbclass
disables everything except do_rootfs). This saves a little time as well
as neatly avoiding the LIC_FILES_CHKSUM verification within do_configure
which is not needed for package groups.
(From OE-Core rev: fde2b0db798f03cf297a0d466a9c3a444f1321f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the Sato pieces have been moved out, rebase packagegroup-core-x11 on
packagegroup-x11-mini but using the structure/contents of meta-oe's
task-x11 so that it can replace that; rename packagegroup-core-x11-mini
to packagegroup-core-x11-base and pull in the xserver/utils packages via
packagegroup-core-x11, and move both of these recipes under
recipes-graphics.
x11-mini is renamed to x11-base as it's what people should build on top
of and since x11-mini is newer, the corresponding IMAGE_FEATURES item is
less likely to be used in existing user recipes.
(From OE-Core rev: 0cc9ced7d96b960994b0671095bc74becfc55e2c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move Sato applications to packagegroup-core-x11-sato.
Note that this eliminates both the apps-x11-core and apps-x11-games
IMAGE_FEATURES; in practice it is unlikely these were useful to anyone
outside of the Sato images however.
(From OE-Core rev: 46cc375f29d5ecac7311613514a474f288d7c781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows package group recipes that do not want the automatic
addition of complementary packages (e.g. for SDKs) to still inherit from
this class and thus it becomes very easy to determine if a recipe is a
package group which we need to do in certain circumstances.
(From OE-Core rev: 3a3ae22bc0be5b36e0400986930f30c22a61a74e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It has never been true that this enables exporting the entire rootfs.
(From OE-Core rev: ecd818f1a7a46aa0eeffe48445f2cf0db5aab67a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This indirection does not add anything in terms of configuration and
only serves to increase confusion; and given the nature of these it is
unlikely they are being used outside of OE-Core. Change the sato-sdk and
sato-dev images to be based on the main Sato image (avoiding the need
for a common SATO_IMAGE_FEATURES variable) and eliminate all references
to them.
Fixes [YOCTO #2458].
(From OE-Core rev: 6488842b0d03cfec9f8675eca5a2e05675decf66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable was added in the very same commit that added a mechanism
that makes it obsolete: if you have dropbear and you want openssh, you
just add ssh-server-openssh to your IMAGE_FEATURES and it will replace
dropbear via IMAGE_FEATURES_REPLACES_.
(From OE-Core rev: 6c78d99cc2e54a99af22357d7567f64e864949b9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runstrip(path, elftype, d) does bitwise & on the elftype parameter, so it has
to be passed an integer. Passing None fails with: TypeError: unsupported
operand type(s) for &: 'NoneType' and 'int'.
(From OE-Core rev: 67f21c6c698464959c27c7e65ee537ab4c378944)
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've not idea why this got left in but as per the comment, it needs fixing
and we shouldn't have hardcoded mappings like this. Lets remove it
and dynamically generate the data instead.
[YOCTO #3039]
(From OE-Core rev: 2df064ad46c1510fa8a401c22db4ab3278c3c807)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch converts the nativesdk class itself from operating as a suffix
to a prefix (see the proceeding patch for the related changes outside this
class).
The big benefit here is that we can reuse the generic class extension code.
(From OE-Core rev: f01f0b8aed25af889f48fe1afff96feb3d9ed120)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes builds where master.list doesn't already exist. This
change was meant to be part of the previous sstate commit but ended
up separated.
(From OE-Core rev: c2109b765b24a7ffe4781257ad3fe4641a3b2a49)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a potential problem where two sstate packages try and touch the same
file. This adds code which will print a warning whenever this happens.
The implementation does but by maintaining a master file list and comparing
file accesses against this. There are a number of places we have duplicate
accesses which are harmless, mostly in the deploy directory so these
are whitelisted.
For now the code prints warnings, this could be strengthened in future to
become error messages. Whilst working on this code on and off over the past
few months various issues were uncovered, some serious.
[YOCTO #238]
(From OE-Core rev: 1f1b6f93d6b7aa8c9bd9bb5b1826997812e36932)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The "tar-package" is used for saving the "Source" list for rpmbuild,
there is no such a file when "ARCHIVER_MODE[type] ?= srpm", and there
would be errors, it hadn't happen before was becuase that the remove
function didn't work. Let the "rpmbuild --rmsource" to remove the
Sources, and the remove function will just remove the tar-package file.
* Remove several unwanted "try ... exception" sentences, let the error
raise rather than ignore them when the error happens.
* Remove several un-needed code.
[YOCTO #2619]
(From OE-Core rev: 6ac3e8be0307ecaea5e92f8bda94f1cd2193a47a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A part of the code in copyleft_compliance.bbclass is duplicated to
archiver.bbclass, remove the duplicated lines.
[YOCTO #2619]
(From OE-Core rev: 731e1171d6c35ed086b36c081f48dba2015319f8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration value from the conf file is lower case, e.g. srpm,
tar, so there is no reason to use the upper case which makes things
complicated.
[YOCTO #2619]
(From OE-Core rev: 036a2502689092bb278b929f6e8ef2a119c1cf35)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix the fakeroot issue
The archiver.bbclass is used for archiving sources, patches, and logs,
it uses the "rpmbuild -bs" from the package_rpm.bbclass to generate the
.src.rpm, but it didn't work (it's not easy to explain it clearly):
Reason:
- It directly used the "fakeroot" command, we don't have such a
command in native tools, so it would use the fakeroot from the host,
and it would fail when there is no fakeroot on the host.
- The "rpmbuild -bs" doesn't need to work under root, but it is in the
function do_package_write_rpm which is running under fakeroot, and
"rpmbuild" needs to know the source file's user/group name, the source
file is the tarball which is created by the postfuncs of do_unpack
or do_patch which doesn't use the fakeroot, so the created file's
owner would be the real user, e.g.: robert, but there is no such a
user under our native tools' fakeroot(pseudo), then the rpmbuild would
fail. It worked when use the host's fakeroot in the past was because
that the host's fakeroot knows the users on the host.
Fix:
- Remove the incorrect "fakeroot".
- Change the source file's owner to root.root under fakeroot will fix the
problem.
* Other fixes:
- The typo: "do_remove_taball -> do_remove_tarball" which will cause the
tarball is not removed.
- Add the _sourcedir defination to the rpmbuild command since the the
SOURCES would be added to the specfile when archiver.bbclass is
inherited, otherwise there would be errors when "rpmbuild -bb", though
the build is OK. It only added the defination to "rpmbuild -bs",
didn't add to "rpmbuild -bb".
[YOCTO #2619]
(From OE-Core rev: ac152f277fdff256def01af4268215a05685a0f7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make the comment line under 80 characters.
* Use the triple double quotes for the docstring.
* Add a whitespace behind the comma (,).
* Other minor fixes.
[YOCTO #2619]
(From OE-Core rev: 885a95992abe11ebef7a8e4363e6002ee80403bf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several fixes:
* It uses mixed tab and whitespace as the indent in one function,
Fix them to use "4 spaces" as the indent.
* Remove the unwanted blank, for example, more than one blank lines
appeared together.
* Remove the tail whitespace.
[YOCTO #2619]
(From OE-Core rev: 5eacbcdf306d9e743164a1563559cd24eb5fffe0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These cause various file conflicts and aren't useful within the sysroot anyway. We might
as well remove them. Whitelisting the contents of ${datadir} that *is* useful might
be a better option in future.
(From OE-Core rev: c9fdd2fd108fa557d8f60339405447b4ea4d6f64)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit a9f11849 [linux-yocto: explicitly export KMETA to scripts]
allows the meta branch name to be changed by exporting it to all
phases of the build.
But if a custom kernel without a meta branch is built, we end up
passing an empty string to the creation scripts, which breaks the
build since input is expected.
Inhibiting the export of KMETA to the creation scripts when empty
fixes the problem.
(From OE-Core rev: 61162fbe01993659301fe2e821bf9c3e801206d8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support custom repositories that set a SRCREV and that only have
a single master branch, do_validate_branches needs a special case
for 'master'. We can't delete and recreate the branch, since you
cannot delete the current branch, instead we must reset the branch
to the proper SRCREV.
(From OE-Core rev: de5bb5879fa3282c46dc1ede36af34eaab8f647f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the kernel's tools/perf/Makefile CFLAGS was previously hard coded to
contain "-I/usr/include/slang" to work with hosts that have
"/usr/include/slang/slang.h" as well as hosts that have
"/usr/include/slang.h". This path can cause compile warnings like:
cc1: warning: '/usr/include/slang' doesn't exists.
or
cc1: warning: include location "/usr/include/slang" is unsafe for
cross-compilation [-Wpoison-system-directories]
Then in some cases warnings become errors if WERROR is enabled hence
build errors.
In coordination with a kernel fix, we can fix this error for all
kernels by modifying the perf Makefile within the staged kernel
source.
(From OE-Core rev: 4e0daf05ed04e9fb4343032c6290a379f53b89f3)
Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"ERROR: Nothing PROVIDES 'grub-efi-x86_64-native'" is returned when
trying to build meta-intel/meta-cedartrail with DEFAULTTUNE = "core2-64"
Used TRANSLATED_TARGET_ARCH instead of TARGET_ARCH in grub-efi.bbclass
[YOCTO #3013]
(From OE-Core rev: 20e2aaacb36113604c4ea7c40dd0bbbf224b8360)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The last two distutils changes progressivly broke the builds. Firstly they
moved things from the site_packages directory to being higher up the tree
which introduced package QA warnings as a side effect. Secondly, it interacts
badly with setuptools which passes in --root=${D} itself.
This patch restores the original directory layout, hence fixing the QA
warnings and also passes extra options to setuptools to deal with the
--root option it passes.
(From OE-Core rev: bed18d5df7915e4127a538be9c7550e185c8c850)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This let's the user override install-lib argument again if it needs
to be something else, otherwise things like python-setuptools
won't be able to modify the install-lib dir
This fixes a new issue exposed by my previous distutils patch
that fixed the python modules default install location. Also,
it removes running the install step twice which was inadvertant
(From OE-Core rev: 3b23feca31480cc56f55301fd0274e622c40b522)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function takes quite a number of arguments and can be tricky to use
properly; this is not made easier if it is undocumented, so document all
of the arguments. (No functional changes, comments only.)
(From OE-Core rev: 324fbcc047819b6948d13eda627ec898cb1f1eb8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The incremental rpm generation usually broke when package_rpm.bbclass
changed, change its implementation to make it more stable:
* It depended on the previous and current saved manifest files in
the past, it would break when the manifest changed. Now query the
previous and current installed pkgs from rootfs/var/lib and
rootfs/install/, this would be more reliable, the manifest's change
would not affect it any more.
* Add explanations before package_install_internal_rpm to explain what
does the function do.
* Remove an unwanted "awk '{print $1}'".
[YOCTO #2906]
(From OE-Core rev: 5d8ca498e09438bd91654fa8b8b2c970956d88e3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In toolchain edge cases it's possible for the RPATH of a library to be
set to something like "/usr/lib/../lib". This should be detected as
"/usr/lib" and generate a warning.
(From OE-Core rev: 72a924d0686389d648338efd3f675fc85ee2d181)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was pointed out we have a number of weird indentations in the python functions.
This patch cleans up 3, 7 and other weird indentations for the core bbclass files.
It also fixes some wierd (odd) shell function indentation which my searches picked up.
(From OE-Core rev: 8385d6d74624000d68814f4e3266d47bc8885942)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
texi2html is not actually required to build world of OE-Core anymore,
so we don't need to mandate it. The only difference without it (verified
with buildhistory) is that groff doesn't produce HTML documentation; the
rest of its docs are still produced and packaged and no other packages
are affected.
Part of the work towards [YOCTO #2423].
(From OE-Core rev: aa1c4519f8e549b43a7d8bc51c5342d3409b464b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* I have 2.6.37 kernel without this directory and do_install now fails
after 813256bf7bb6e26d542d5f769e2802564116ebe5
(From OE-Core rev: 9a83afe0794e96590aee374555efea91b3085b91)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kern-tools scripts can support a meta branch and directory of a name that
isn't "meta", but they need the name passed through the environment variable
KMETA. ensuring that KMETA is exported in the shell environment sets the stage
to support flexible meta branch name.
(From OE-Core rev: 9b90c8ace04c88ac6105f0bf686f9abc70fe8074)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel branch is no longer required by the yocto-kern-tools
to locate BSP feature descriptions (it is the MACHINE:KTYPE
descriptor), so we no longer require that the BSP branch be
explicitly set.
If a kernel branch is explicitly set, it is now used to trigger
a checks to ensure that the branch really is being built.
Otherwise the branch that the machine description creates will
be built (just as it always was).
This further simplies the use and configuration of a linux-yocto
based kernel recipe.
(From OE-Core rev: 3cac3ce65abae9dc253641a2004440a2b38fd44d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
asm/unistd.h includes asm/unistd_64.h on x86_64
and asm/unistd_32.h on i386 but these files are
generated files in 3.4 and when we do 'make clean' they get
deleted and it shows up as an error when building
external modules. May be its a 3.4 kernel bug may be not
but make clean should have left the tree in
a shape to build modules but it does not.
Probably we should run make modules_prepare after having
run make clean.
(From OE-Core rev: 813256bf7bb6e26d542d5f769e2802564116ebe5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PACKAGECONFIG flag code only handles that when it has 3 or 4 items in flag,
it may have a stale data if some flags doesn't need DEPENDS and RDEPENDS.
(From OE-Core rev: 884cab0428cff2ffd070b6f36b688ca9851fbe43)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race where do_clean tries to clean WORKDIR but there are logfiles
written into ${T} by bitbake and this can lead to exceptions due to open files.
The easiest solution is to redirect T to a different location for the do_clean
task, hence avoiding the errors and also allowing the logfiles to be visible
somewhere. ${LOG_DIR} seems an appropriate place for this.
[YOCTO #2846]
(From OE-Core rev: eef9d6c2d52f5264a6e7a9d882f8323f9793fd7f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* There would be race issue if we put the lock to the WORKDIR, for
example:
bitbake core-image-sato core-image-sato-sdk
If the lock is in their own WORKDIR, the apt-rootfs.conf and
Packages.gz maybe be written by two tasks at the same time, which
would cause unexpected errors.
* Create ${target_rootfs}/etc since the "tar -C" needs it.
Note:
* The rpm has put the lock to DEPLOY_DIR_RPM
* The ipk doesn't need it since it has locks for each deploy directory
and put the opkg.conf in his own WORKDIR, which doesn't like deb put
the apt-rootfs.conf in ${STAGING_ETCDIR_NATIVE}/apt/.
[YOCTO #2495]
(From OE-Core rev: 23ac392f8b868296eb9e7cd840f9b28ed6917b27)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this some modules will be intalled in /usr/lib/python2.6/
instead of /usr/${libdir}/python2.6
(From OE-Core rev: bc6bd774aa8a3e085e9cabcefb11c3fc537139d5)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During an attemptonly install, if you try to install two packages that
conflict with each other, a message is generated:
error: Failed dependencies:
dropbear conflicts with openssh-6.0p1-r4.ppc603e
dropbear conflicts with openssh-sshd-6.0p1-r4.ppc603e
This is placed onto stderr (vs stdout), which was not being redirected.
This allowed the log-check code to find the magic key of "Failed" causing
the package installation process to fail. Instead the proper behavior is to
simply ignore the error and proceed with the install.
(From OE-Core rev: 16d8d7fdda4ae7d108f5d50cde3f6104e231bd23)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a case when RPATH embedded in program have one of
its path already relative to ORIGIN. We were losing that path
if such a path existed. This patch appends it to the new edited
rpath being created when we see it.
so RPATH like below
(RPATH) Library rpath:
[$ORIGIN/../lib/amd64/jli:$ORIGIN/../jre/lib/amd64/jli]
would end up being empty
but after this patch its kept intact
(From OE-Core rev: 43600df0d4efc976a9451163dd334b4763937932)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this change, a path to "/lib/xxx" or "/usr/lib/xxx" would also
attempt to be remapped to be relative to $ORIGIN which makes no sense.
(From OE-Core rev: 73e2c12534856f14c1a94fb51874e9ba1655f07b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When chrpath fails, prefix the error message with the name of the recipe
that is being processed, and include the the output from chrpath, as
well as making the calling task actually fail.
(From OE-Core rev: 99815eddd4e1eb5d939831704231537dd5a995ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building the meta-toolchain, the binaries didn't get relocatable
RPATHs. They were hardcoded to the default path. Hence, if one had
already installed one SDK in the default path and one in another
location, the later toolchain's binaries would search and load libraries
from the first location, ending in a "Segmentation Fault".
[YOCTO #2927]
(From OE-Core rev: b40a03c43d5d9d738a9aa5b43b2ecfe74fc95018)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The problem appears if multiple setup environment scripts are found. In
order to find only the script we're interested in, I removed globbing in
matching pattern with ${REAL_MULTIMACH_TARGET_SYS} that will be expanded
to the correct string.
Also, fix a problem when changing the scripts/configs. The grep pattern
matched also files that contained "text" in their name.
(From OE-Core rev: d81768560676da201fd730ae3930b080ab8c5c75)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that the result of getVarFlags is not a list, it's
a dict. So "getVarFlags(...) or []" does not reliably produce
something with a .items. This escaped detection because our
local build environment never ends up running builds without
PNBLACKLIST entries.
(From OE-Core rev: 491df239170dd20f3e91df6bc1ead2945a78e075)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If chrpath failed here we were just silently ignoring it.
(From OE-Core rev: 24babf9316da50c8a4d2f328c4336cb8cd6cf667)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the Pimlico applications (Contacts, Dates, Tasks). oe-core isn't a
reference PIM stack, so we don't need this.
(From OE-Core rev: 373895e6c691277e15a09aee3504243448c55b50)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class registers postinst/postrm hooks to compile the GSetting schemas, and
adds the relevant dependencies. If possible the postinst happens on the host to
avoid running it on the target.
[ YOCTO #2798 ]
(From OE-Core rev: ba9d5626174c1144b83963755ef310328306c3a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
(From OE-Core rev: 163dd734d79fd7040b48b10bca6fde28460ac20c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel.bbclass is a common class for many different kernel versions,
and as such the default module_autoload and module_conf values that
it contains are not relevant, or out of date for most builds.
Individual kernel recipes or distros can better specify these
values to meet their needs.
(From OE-Core rev: a134efa7743edc3b7ca8abb651add6d2045c3b44)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PNBLACKLIST feature does not currently work with multilibs,
because they have different ${PN}. The obvious thing to do is to
do this at the same point that we do the PREFERRED_PROVIDER
and PREFERRED_VERSION fixups. (Making the PNBLACKLIST check
do the for-each-multilib check requires it to do the multilib
list generation repeatedly.)
(From OE-Core rev: 9bc0ca9369d0daee94abf60d3d521cc734c7e8cd)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is useful when you have a rather large set of compatible distros. For
example: Centos 5.4, 5.5, 5.6, etc, RHEL server 5.x, RHEL workstation 5.x.
(From OE-Core rev: 0e9932b2dba8573736c92bd07e59bad21b9fda2d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libdir should be specified, or else mklibs won't work for 64bit targets.
It wouldn't be able to find the libs.
Traceback (most recent call last):
File "<build>/bitbake_build/tmp/sysroots/i686-linux/usr/bin/x86_64-wrs-linux/mklibs", line 553, in <module>
header = elf_header(find_lib(libraries.copy().pop()))
File "<build>/bitbake_build/tmp/sysroots/i686-linux/usr/bin/x86_64-wrs-linux/mklibs", line 89, in elf_header
raise Exception("Cannot find lib: " + obj)
Exception: Cannot find lib:
(From OE-Core rev: d2cd2ccea8bc4d110647ba3bd202772e5407000a)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_libdir change in 5b8a4798ea
breaks the kernel build for 64 bit machines. Revert this part of the
change.
(From OE-Core rev: 351bdc59f8af915ae203af7799eedc0ce42785f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If ${PN} is not in PACKAGES then don't add it as an RDEPENDS for each
locale package. This fixes the installation of gcc-runtime locale
packages, for example.
(From OE-Core rev: d36c3235b3022c07f064929f55114f808a7634f6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Always write the metadata revisions for each layer into a machine-
readable "metadata-revs" file so that you can potentially link changes
in the output back to changes in the metadata. (Unlike the existing
similar build-id file, this is not specific to image changes.)
(From OE-Core rev: 45f38d167b523d769c072474b36b3d9b31b4e9d9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Save PKG (the actual output package name, which is often different due
to debian renaming), and PKGE/PKGV/PKGR (which may be manipulated in
certain special cases e.g. gitpkgv.bbclass in meta-oe, the
external-sourcery-toolchain recipe, etc.) Note that these are only
written when they are different from the normal package name in the
case of PKG, or PE/PV/PR for the other variables.
Also, use PKGE/PKGV/PKGR instead of PE/PV/PR when comparing package
versions since these actually represent the version that the package
manager sees.
Implements [YOCTO #2787].
(From OE-Core rev: 65d7e9b2d4d8115ac9fd513c04f39a2df9556a5a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Write the value of these package script variables into the packageinfo
so that any changes to them can be tracked (in separate files since they
are multi-line).
Inspired by an earlier patch from Andreas Müller <schnitzeltony@googlemail.com>
(From OE-Core rev: 988a417c857c01c87de6ba9602968059cf8d830f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getlastrecipeversion and readRecipeInfo weren't called anywhere.
Remove them so we don't have to keep them up-to-date with future
additions to the recipe info file.
(From OE-Core rev: 22bf6284576ccee607d7bd197420a29242df11c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a package is removed from PACKAGES, ensure that the package info file
and directory are removed from buildhistory so that we don't have stale
data lying around.
(From OE-Core rev: 223b183197b363edef0c11a25bad33555fca5a15)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the ability to set BUILDHISTORY_KEEP_VERSIONS = "1" to save the
package history as flat versioned files rather than relying on git to
keep previous versions of the package information. git has proven to
work quite well in this capacity.
(From OE-Core rev: ccedfd250620fc562988ba730ad5717b107a9d3e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: c859717f522098e7c68df578d59011f68122dc2c)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have moved the rpm-createsolvedb.py
script to createrepo-native for good reason of
python-native dependency, we have to make sure
that it is staged before its used, unlike before
where it was under scripts/ dir and always existed
outside the realm of package management.
Fixes build error when doing meta-toolchain builds from
scratch
|
/home/kraj/yocto/poky/build/tmp/work/ppc64e5500-poky-linux/meta-toolchain-1.0-r7/temp/run.populate_sdk_image.26712:
line 610: rpm-createsolvedb.py: command not found
| DEBUG: Python function do_populate_sdk finished
| ERROR: Function failed: populate_sdk_image (see
/home/kraj/yocto/poky/build/tmp/work/ppc64e5500-poky-linux/meta-toolchain-1.0-r7/temp/log.do_populate_sdk.26712
for further information)
(From OE-Core rev: 90cfe33d30ef4f9491bd52e7965c5279a2e2650c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RP: The list of recipes in multilib.conf needs to go away and we need
to just be able to extend all recipes with the multilib class.
Tested by building and running lib32-core-image-sato-sdk.
[YOCTO #1563]
(From OE-Core rev: 5d691f1bc95dfb9109b07827b33957b1fa5b2fa4)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change binaries RPATHs, to include $ORIGIN, to make them relocatable.
(From OE-Core rev: f6362c5248914485fc8bf3c3f0ca6cc962bf753e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the code in relocatable.bbclass will be used for relocating the
SDK binaries. So, create another class chrpath.bbclass that will contain
the core of the relocatable.bbclass, so we can reuse it.
(From OE-Core rev: b50677b1641b201fd69942fd82a360907338234d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the SDK to be relocatable, the user would need to call a
setup script to change the binaries acordingly. Having an auto-extracting
archive has the advantage of being more user friendly and the user does
not have to call the setup script separately after extracting the SDK.
It is called automatically.
(From OE-Core rev: d4e976849da845d595db7029d8089946ae16d982)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sourceforge.net link is broken at the time of this patch,
so I added a mirror.
License changed to GPLv2+
(From OE-Core rev: 1452b5e60eff29e7423ecdd51d2d942e88dcc263)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: af274b1b266b5aa661823bd702eacc62cc3aefff)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move scripts/rpm-createsolvedb.py to
meta/recipes-support/createrepo/createrepo/ since we should wrap it to
use the native python.
[YOCTO #2822]
(From OE-Core rev: 72d673bef385e756bd858f9eca7fe419efaceb39)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
we were assigning local variable to an array coming through
positional arguments. local is a non posix contruct thats
also supported by dash luckily but operates differently in this
case it exapnds the array before assignment. so
local pkgs="$@"
turns into pkgs=locale-base-en-us locale-base-en-gb
ant we see errors
run.do_rootfs.25593: 932: local: locale-base-en-gb: bad variable name
So lets not use defining and assigning local in one go
first define a local and then the assignment
(From OE-Core rev: 4029ce1a15e1dbd374444ee77ccf2a915e463b7b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some packages have .ko files which are not elf, without this change
it fails with TypeError, with this change only runstip fails and
reports where:
ERROR: runstrip: ''arm-oe-linux-gnueabi-strip' '/OE/shr-core/tmp-eglibc/work/armv4t-oe-linux-gnueabi/emacs-23.4-r0/package/usr/share/emacs/23.4/etc/tutorials/TUTORIAL.ko'' strip command failed
(From OE-Core rev: a834ab8a6d53cae504fa112a89bab93d726539ec)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable building the commercial edition of Qt (through additional
recipes that are *not* provided by OE-Core) we need to tweak a few
things:
* Don't make recipes that inherit qt4x11.bbclass depend on qt4-x11-free
- instead add qt4-x11 to DEPENDS and then have qt4-x11-free include
this in its PROVIDES. A commercial equivalent recipe should do the
same.
* Add a QT_LICENSE_FILE variable that can be used to specify the license
file required by the commercial edition.
* Add a QT_LICENSE_FLAGS variable which the recipe can set to select the
license option being used. The default of "-opensource" retains the
current behaviour; a commercial recipe should set it to "-commercial".
Fixes [YOCTO #2505].
(From OE-Core rev: 2be0058fc4acddab611637656183accd052b40eb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of OE-Core revision 72d1048a8381fa4a8c4c0d082047536727b4be47,
rpmresolve is now required for complementary package installation during
do_populate_sdk.
(From OE-Core rev: 8a71c1a507289d38a0f675584ab206abfa9aad9a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We set do_populate_sdk[depends] in populate_sdk_*.bbclass, but since
these are inherited at the top of populate_sdk_base.bbclass, those
values are wiped out by using = at the end of the latter class. Use +=
to avoid this.
(From OE-Core rev: a87b5d6cab34579cf3abe03f4663d9a72e218397)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Linux 2.6.x kernels did not (all) have the bounds.h file, so copy
only iff exists.
(From OE-Core rev: 02ac0d1b65389e1779d5f95047f761d7a82ef7a4)
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_package needs to be re-run and packages are removed/renamed as a
result, we want the corresponding stale pkgdata files to no longer be
present; for that we need to ensure all of the old pkgdata files are
cleaned out prior to creating the new ones. This is particularly
important now we rely on pkgdata more heavily (for complementary
packages, license manifest, etc.).
(From OE-Core rev: 5dee47b476a6f715ab02af5e758441a2a934eea3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
(From OE-Core rev: d0b8a98c5b46c305afd389fc862b3bf0c6f1eaab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a staticdev-pkgs feature that can be added to IMAGE_FEATURES in
order to install all staticdev packages.
Fixes [YOCTO #2531].
(From OE-Core rev: 3ba9c0757eb51a0bb5873f4faae023587a33cc1d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
(From OE-Core rev: 72d1048a8381fa4a8c4c0d082047536727b4be47)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the lsb name and revision to the path used for sstate files.
This means that reuse of sstate files between different distributions is restricted
by default. The behaviour can be configured using mirror urls, for example:
SSTATE_MIRRORS = "file://Ubuntu-11.10/(.*) file://Ubuntu/\1 \n"
would map Ubuntu 11.10 to a more generic "Ubuntu" named sstate feed.
Usually, more modern distros have increased libc versions for example
so whilst more older native/cross sstate packages will usually work on newer
distros, the opposite is not true. This patch allows development of policy
to better handle this although no default policy is currently being used.
(From OE-Core rev: 9360fc318cec5c873b17f59b817dd6312c81ee27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently all sstate files are placed into one directory. This does not scale and
causes a variety of filesystem issues. This patch adds a two character subdirectory
to the layout (based on the first two characters of the hash) so that files
can be split into several directories.
This should help performance of sstate in most cases.
(From OE-Core rev: 5d45c7b025f6635b2232d7bf92b7c1aba350396b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can then be used by the sstate code to mark native and cross packages
as being specific to a given distro.
(From OE-Core rev: 8556eb98be8bd9f02ee11a0d8a889c1895c86460)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"error_promt" -> "error_prompt" changed in both places
"subfolers" -> "subfolders" since it's not referenced anyway
(From OE-Core rev: cc1f824778c023686b4ea75c64a182a138ff2267)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make dbg package dependencies added via DEPCHAIN_POST less aggressive -
only add dependencies on dbg packages for shared library dependencies.
This avoids dragging in extraneous packages (such as eglibc-dbg forcing
bash-dbg to be installed) whilst preserving the ability to easily debug
into shared libraries in use by an application by just requesting the
installation of the single dbg package for that application.
For task recipes however we preserve the previous behaviour, since when
you install task-xxx-dbg you expect the dbg packages for every package
in the task to be installed. Unfortunately not all of our tasks inherit
from task.bbclass so we just use a name match - this should be tidied up
later.
Fixes [YOCTO #2599].
(From OE-Core rev: 352522d474cb75992d7865545b6fbe4e157a5f99)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid adding dependencies to dev and dbg packages on themselves via the
DEPCHAIN_* handling code. These don't actually cause any problems, but
they do complicate dependency graphs.
(From OE-Core rev: ecdf7874470cff24cb23b7fd2723096b15aead31)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If something is listed in ASSUME_PROVIDED but also manually built (like bzip2-native and
bzip2-replacement-native), we need to ensure that the installed binaries are only accessed
for things which list the provider in DEPENDS.
This patch adds a generic mechanism to handle this instead of everything reinventing the
wheel. EXTRANATIVEPATH += "perl-native" will ensure that ${STAGING_BINDIR_NATIVE}/perl-native
is added to PATH.
This means that:
a) Such providers should install to ${bindir}/xxx-native
b) Should PROVIDE += "xxxx-replacement-native"
c) That users should DEPEND on xxx-replacement-native and have EXTRANATIVEPATH += "xxx-native"
This patch enables this at the core level, the bzip2 recipe still needs adjusting to work
like this along with adjustment of the users of bzip2-replacement-native (python-native?).
(From OE-Core rev: 14b70cd222519e5bccaca955334787f123d9fc54)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Ross Burton
Phil Blundell
Otavio Salvador
Bogdan Marinescu
Saul Wold
Thomas Kristensen
Marcin Juszkiewicz
Mark Hatle
Khem Raj
Laurentiu Palcu
Elizabeth Flanagan
Constantin Musca
Wenzong Fan
Jason Wessel
Robert Yang
Christopher Larson
Paul Eggleton
Radu Moisan
Andrei Gherzan
Bruce Ashfield
Vladimir Zapolskiy
Kang Kai
Tomas Frydrych
Liang Li
Mihai Lindner
Matthew McClintock
Andy Ross
Martin Jansa
Yao Zhao
Florin Sarbu
Peter Seebach
Jesse Zhang
Javier Martinez Canillas
Robert P. J. Day
Leon Woestenberg
Andreas Müller