This patch fixes the recipe and layer identification by path
when Toaster uses relative paths.
(Bitbake rev: a92bb33a3ceacab2bfee9df1c39a202832866970)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We improve logging and signalling of errors in the
toaster_ui.log to facilitate debugging on remote systems.
(Bitbake rev: 3cd248f99b90367bd41aab81e255fc1912434890)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It used 5 spaces as the indent.
(Bitbake rev: 162d35ed53d34b28b153adf643044e7f105fcff1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We modify the toasterui to log relative recipe paths
in order to maintain consistency with data fetched from
the layer sources.
(Bitbake rev: 253d69e88fd68729196ad43c15e8733527d76198)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In build mode, instead of creating our own layer objects,
we identify the layer objects that the build system set up.
[YOCTO #7378]
(Bitbake rev: 22962b540ace6868cb357c0fd13f01ffd24449c4)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Every time the bitbake show versions command (bitbake -s) is run it creates
a 100k log file.
The consolelogfile is disabled for show environment and disabling show
versions would make the behaviour match.
(Bitbake rev: dee0ba94e39ea49c1e9261a5e8932356e3bb7c57)
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Any exceptions that occur in calls to logging methods are automatically
suppressed, including exceptions due to broken pipes.
However, the knotty summary messages are printed directly to stdout, which
means that any broken pipes will cause an exception traceback in python.
By wrapping the summary section in a try / catch block we can check for
IOError exceptions caused by broken pipes and let them pass.
(Bitbake rev: 146e7e157f97b676858ecff583dd53800d997253)
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent inotify changes are causing a 100% cpu usage issue in the
idle handlers. To avoid this, we update the idle functions to optionally
report a float value which is the delay before the function needs to be
called again. 1 second is fine for the inotify handler, in reality its
more like 0.1s due to the default idle function sleep.
This reverts performance regressions of 1.5 minutes on a kernel build
and ~5-6 minutes on a image from scratch.
(Bitbake rev: 0e0ba408c2dce14a0fabd3fdf61d8465a031495b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5571] -- https://bugzilla.yoctoproject.org/show_bug.cgi?id=5571
The following workflow (whether accidentally or deliberately) would
previously not result in a checksum error, but would be helpful to do
so:
- Write a recipe with correct checksums
- Fetch the sources for this recipe using bitbake
- Change the checksums
Since the bitbake fetcher writes a done stamp after the initial download
and does not verify the checksums again (even if they are changed in the
recipe afterwards), the change of checksums is silently ignored.
Fix this without the overhead of computing the checksums from scratch on
every do_fetch by storing them in pickled format in the done stamp and
verifying that they still match those in the recipe.
(Bitbake rev: fbd4a0d422cf7f43db2f9eab2e47c41246a9031e)
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes sure to delete an idle function that
raises an exception for the xmlrpc server.
The counterpart functionality in the process server was
added with:
commit db50630948.
duthor: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Wed Aug 20 22:31:06 2014 +0000
bitbake: process: Deal with infinite looping of the server
This patch fixes
[YOCTO #7316]
(Bitbake rev: e7c9a6788d969c901fd6394416ac3936e62c4c72)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes a bug where if the build is force stopped,
subsequent clients cannot connect to the server due to
unnecessary limits on setFeature.
Additionally, we make sure that the state is properly reset
even if the BuildCompleted event firing excepts for some reason.
(Bitbake rev: 0b66b05169688aa4ddc4c54d175bb961b2f27fec)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We roll back the client connection if some error happens,
like during setFeatures, as to leave the server accessible
to other clients.
(Bitbake rev: 4e4a2ee2f05f8741b2e09263e328420363975b02)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The inotify facility monitoring changes to the config files
could be overwhelmed by massive changes to the watched files
while server is running.
This patch adds verification the notification watches to the
server idle functions, in addition to the cooker updateCache
command which executes only infrequently, thus preventing
overflowing the notification buffer.
[YOCTO #7316]
(Bitbake rev: 996e663fd5c254292f44eca46f5fdc95af897f98)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some databases, notably the SQLite3 adapter, force autocommits even if
the autocommit is turned off. The behavious is tracked in this bug:
http://bugs.python.org/issue8145#msg109965
Django refuses to work with autocommit off in this case, so we have
to take the same precautions when using manual transaction support.
[YOCTO #7363]
[YOCTO #7365]
(Bitbake rev: 90231ab63a129fa344d461c2911898ea0f07f206)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes a problem where set sstate scene tasks
were not identified, causing cache attempt not being recorded.
[YOCTO #7223]
(Bitbake rev: 8a326a9a5a08981f1b7960e02fdb8a9436db16fb)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch disables autocommit for inserting build data,
effectively updating all build data in a single transaction.
This is a purely performance improvement patch, as the transaction
will always be commited.
Similar manual transaction handling in the layer source update
method. Added feedback messages during update method.
[YOCTO #7140]
(Bitbake rev: 3978c819e797f857235499a4b8ec238134f1c028)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch brings in cooker log saving and proper download links.
* toasterui will now write the cooker log file if running in managed
mode
* the BuildRequest has a new state, REQ_ARCHIVE, indicating that the
build is completed, and the artifacts are ready to be grabbed
* the runbuild test execution commands will gather needed artifacts,
and save them to a storage directory selected during Toaster setup.
* the build dashboard, project builds and all builds pages have
permanent links for the cooker log
[YOCTO #7220]
[YOCTO #7206]
(Bitbake rev: fad80e36c9da663b000cdf2cb3c75440c6431d84)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add set of PN in data because now latest_versionstring use it for
validate version directory searching.
(Bitbake rev: 2e4a03db967ac1459b2764108fc54c4566a7e371)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix sustition for rc, beta and alpha releses from -N to N weight.
(Bitbake rev: 63a9e60a6d80cfd2693ec1a6359785dc19f98e1f)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for scan every version directory using _check_latest_version
makes code more robust because sometimes upstream projects publish
new directories without files, causing don't find version.
To support this new behaviour remove _check_latest_dir and replace for
_check_latest_version_by_dir,
(Bitbake rev: 1a75b3707743c32eec9d2cf566fb6bbea9f73784)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add _check_latest_version_by_dir this function provides support
for scan every directory newer than current dir in order to get
latest_versionstring, example:
http://somedoamin.com/project/v2.1/http://somedoamin.com/project/v3.0/
Change return of _vercmp from True/False to -1/0/1 to provide test
when current directory is equal to newer directory this helps to
scan the same directory to get minor versions, example:
http://somedoamin.com/project/v2.1/project-v2.1.2.tgzhttp://somedoamin.com/project/v2.1/project-v2.1.6.tgz
(Bitbake rev: 5f7c5eb218a221165f59a0f4dd48d2d97f756193)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to reduce code duplication now compile package_regex in
_init_regexes instead of make this decision at _check_latest_version,
(Bitbake rev: e7284e3ad0e7dd91ed59dfbf8450ef62e89c7e54)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for get group only if exist in regex, this enables to use
this function in _check_latestversion regardless if the regex is generic
or specified by REGEX_URI.
(Bitbake rev: 1127af5b8c458929c4685b0326f86870ed09442e)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've had versioned dependency support in LAYERDEPENDS for quite a long
time, but I can say with pretty good certainty that almost nobody has
used it up to now because it was too strict - the specified version had
to exactly match the version in your configuration or you would get an
error; there was no "greater than or equal" option, which is usually
what you will want given that LAYERVERSION does get bumped from time to
time.
However, users mismatching layer branches and then having their builds
fail later on with some incomprehensible error is still a pretty common
problem. We can't simply use the git branch because not everyone is
always on a branch and the branch names don't always match up (and
that's not an issue). To provide a practical means to address branch
mismatching, I have reworked LAYERDEPENDS version specifications to use
the more familiar "dependency (>= version)" syntax as used with package
dependencies, support non-integer versions, and clarified the error
message a little. If we then take care to bump the version on every
breaking change, it is at least possible to have layers depend on these
changes when they update to match; we can now even support a major.minor
scheme to allow retrospectively adding a version limiter to old branches
when a new branch is created and yet still allow the old branch minor
version to be bumped if needed.
Fixes [YOCTO #5991].
(Bitbake rev: 408be9cdf2b1e32e64ea488d8051a546fb54c144)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This scheme is used for versioning recipes that are pre-release (alpha,
beta, etc.) within OpenEmbedded, so add some tests to ensure the
appropriate comparison results still hold true.
(Bitbake rev: 3a9eefe27f29a4593d6298f0427ac5f3e9183377)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We really want an error rather than the version to just be silently
skipped when the operator is missing (e.g. "somepackage (1.0)" was
specified instead of "somepackage (>= 1.0)".)
(Bitbake rev: b6dc946f477adc40d68da16e2f2580cb3b4a10db)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake -g -u depexp <package> segfaults when DISPLAY is not set
properly. Fix it with a proper check.
[YOCTO #7299]
(Bitbake rev: f35e9bd7b59c180fe9a3d9177efb57b92d9cd373)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch improves the logging facilities for toaster in order
to help diagnose bugs that happen on user machines.
The logs are stored now under "/tmp/toaster_$$" where $$ is a
PID-based unique identifier. On shutdown, toaster will automatically
erase all logs unless errors are listed in the log file.
On error, Toaster provides suggestions on what to do.
This patch includes a minor fix found as a result of logging
improvements.
(Bitbake rev: 8a8248f7b7e30469f592e2f8adbf6ce21e8685c5)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Given these assignments:
TEST="a b c d"
TEST_remove = "b d"
TEST evaluates to "a c". However, if the _remove override is given as a
variable:
TEST="a b c d"
FOO = "b d"
TEST_remove = "${FOO}
TEST evaluates to "a b c d", because when FOO is expanded it isn't split into a
list.
Solve this by splitting all members of removeactive once they've been expanded.
[ YOCTO #7272 ]
(Bitbake rev: 207013b6dde82f9654f9be996695c8335b95a288)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The _remove operator isn't working correctly when used with a variable that
expands to several items, so add a test case to exercise this path.
(Bitbake rev: cb2a62a5fbffb358528a85b46c1fc6383286cb9d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These only have one instance created which means your subsequent datastores
can contain echos of previous ones. Obviously this is not the behaviour
we want/expect. It doesn't affect bitbake too badly as we only have one
datastore, it does massively potentially break our selftests though.
Thanks to Tim Amsell for pointing out the now obvious problem!
(Bitbake rev: 9facf3604759b00e8fe99f929353d46f8b8ba5cb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ToasterUI filters build artifacts by extension in order
to determine if a build artifact is an image or not.
Using IMAGE_FSTYPES for this purpose is not correct as
the varible value holding image extensions is just a coincidence.
So we just look if the filename contains the "rootfs" magic
string, which is a pretty good approximation.
[YOCTO #7213]
(Bitbake rev: b11e8bd626e0212ee72914529c3d92d1dd718674)
Signed-off-by: Alexandru Damian <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The get/set_taskdata functions are now part of the API of the class,
ensure they exist in the base class definition so the noop handler
works.
[YOCTO #7233]
(Bitbake rev: 9b5b1bd7d77e3f5886f6c557d3b750de1f6d6025)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Users expect operators like _remove to work on this variable. We need
to use expanded_data to ensure this happens correctly.
[YOCTO #7135]
(Bitbake rev: cc4c8478fc547ea0ebf827a8d319496b39f25684)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
event_data would be better named expanded_data, then we can widen its scope
to other places in cooker where we need to access an expanded data store.
We certainly don't want multiple expanded data stores.
(Bitbake rev: 1a3c1c9203e1a1452314954f1cfd771e5c1ce89b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a report that bitbake -e | less would use 100% cpu when it shouldn't
really. The issue appears to be a bogus file descriptor in the select call. We
shouldn't be blocking if there is event data pending to a *reader* from server
context.
[YOCTO #7138]
(Bitbake rev: 8f166e1a0f3574ae7d1e917a8bb403b87bad15bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add a call that saves any queued events to the build
[YOCTO #7021]
(Bitbake rev: 4f5b19d453da64749affc1c27ec51b013bedc71a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When built package regex for use in searching upstream version in sites,
the package name need to be escaped to avoid usage of special regex
char.
For example when search for gtk+, '+' need to be escaped.
(Bitbake rev: 1aa1de4b0c5bd34466e04844bbc371933736be59)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trap the ENOSPC error and translate it into a human readable error
message, which is good for debugging.
(Bitbake rev: 2b084dff6ff0d274fbbf7ab07022507f7249e427)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We currently add crazy numbers of watches on files. The per user limit is 8192
by default and on a system handling multiple builds, this can be an issue.
We don't need to watch all files individually, we can watch the directory containing
the file instead. This gives better resource utilisation and better performance
further reverting some of the performance regression seen with the introduction
of pyinotify.
(Bitbake rev: a2d441237916a99405b800c1a3dc39f860100a8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the environment changes, we need memory resident bitbake to adapt to those
changes. This adds in functionality to handle this alongside the configuration
option handling code. This means that the common usage:
MACHINE=X bitbake Y
now works with the memory resident server.
(Bitbake rev: 4d1343010da757a0c126bc22475354da44aaf8e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the comments on get_srcrev() to better describe its function.
(Bitbake rev: b4d40f1ac7b32990c456cce261f99a5a157b5ae5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A bug slipped in the toaster ui that prevented saving of
build configuration despite the data being retrieved
from the server. This patch fixes the shaming mistake.
[YOCTO #7117]
(Bitbake rev: 8118f465b9f87c66b2a741008f69198ac5fea901)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The import statements here are plain bizarre. Remove them, tweaking
some of the function calls to match current practices. I can't find any
reason these old imports are as they are.
(Bitbake rev: 4c2f1fe51a13ddc97e518327714292af46b9e1ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at this function I had no idea what oldfn was, I doubt anyone
else would either without looking up what the caller does. "parentfn"
would seem a more appropriate name so rename it.
(Bitbake rev: fc70ed596703a1aa954223b169d4ad51193a6ec1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Benchmarks show that the introduction of pyinotify regressed
performance. This patch ensures we only call the add_watch() function
for new entries, not ones we've already processed which does improve
performance as measured by "time bitbake -p".
This doesn't completely remove the overhead but it does substantially
reduce it.
(Bitbake rev: 493361f35f6cc332d4ea359a2695622c2c91a9c2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexandru DAMIAN
Robert Yang
Rob Woolley
Richard Purdie
Clemens Lang
Aníbal Limón
Paul Eggleton
Maxin B. John
Ross Burton
Pascal Bach