* to keep ${PN}-locale from
bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"
(From OE-Core rev: 73252b16b501c0986b0ca0895e4534895a9ba3db)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
(From OE-Core rev: 2f3ebdfa5f42dae51063b043cc4b0fbe20b40064)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sysklogd recipe had a cut-n-paste version of the
update-rc.d.bbclass code which didn't work, but this was hidden
because all images contain the busybox version which does. Building a
busybox-free image unmasked the issue and syslogd wouldn't start on
first boot.
The comments seem to be wrong/stale. AFAICT update-rc.d and
update-alternatives work fine with each other, though there is an
ordering constraint (alternatives must be specified last, so it
"wraps" update-rc.d). This version builds and works both with and
without busybox.
(From OE-Core rev: 644673631bf57bd8d0e152b5fe7621344b5ad24f)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, if configure fails, it won't be able to run again as the directory
already exists.
(From OE-Core rev: 71a3ba536d022eea3a199cf4d6c5c791d91603a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
diffutils has a rather confused set of getext macros with different names and
strange conflicting version requirements. This patch removes the problematic
macros allowing it to 'gettextize' to the latest standard gettext code without
issue.
(From OE-Core rev: a40b89333652ca22a6e6957ab8a2a4e41b87b4c0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The environment CFLAGS is not used by the chkconfig
Makefile, so debug and optimization options are ignored.
So, we use RPM_OPT_FLAGS to pass CFLAGS into Makefile.
Upstream-Status: Inappropriate [configuration]
(From OE-Core rev: ecdb24c21b7b90b83748cbe5891437b2183321d7)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license for bzip2 is not quite BSD. I have an email out to the
maintainer to see if we can utilize a common BSD license (or something
else) however, for now, we should revert bzip2 back to a special
license.
As busybox also utilizes a lightly modified bzip2, this also
effects busybox.
(From OE-Core rev: a0b132798d2c1adf79414787b8317327a554f852)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors. Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.
(From OE-Core rev: acc988272b4e74a9ad1e6da5af5b2d208584197b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to libaio, libcap is another dependency of ltp.
If libcap has been done populate_sysroot but rpm/ipk package is not
created, ltp will be compiled with libcap. So when install ltp to a
image, it complains that package libcap is not found.
[Yocto #2973]
(From OE-Core rev: bf5215f095e7e610508fcefe1224c9289c6c56cd)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For start-stop-daemon, --make-pidfile is used when starting a
program that does not create its own pid file.
atd would create its own /var/run/atd.pid, so remove this option.
(From OE-Core rev: f10d236cda704cd91e185f8dc9c3f52461e2dad1)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the lsbtest's list file that we can download the latest
sub-packages of LSB suite 4.1.0 and then run the test with them.
(From OE-Core rev: a2f81aa58c4753412afc0227c34f08134b6a3d2d)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bash-3.2.48 did not provide the linking from sh to bash, making it unusable.
Moving the license part out of the bash.inc file, and into bash_4.2.bb file makes
us able to use that file also for bash_3.2.48.bb, which makes maintaining both
at the same time a lot easier.
(From OE-Core rev: e7b82cb4d107bfbfa5c939d406dd6ce6615b24e1)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_install needs command 'msgfmt', it would fail if the command
doesn't exist on the host, add DEPENDS gettext-native to fix this.
[YOCTO #2811]
(From OE-Core rev: f12f75aa57cacc73a0428cedba970076f0abb9f8)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These values need to be passed on the command line to "make install" otherwise
shadow will use its own built-in idea of where those directories are located.
(From OE-Core rev: 2b4b5f3259be4b790c098fc98cae0275ac6804a0)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The makefiles in the shadow package have their own hard-coded paths
for ${base_bindir} and ${base_sbindir} (known as "bindir" and "sbindir"
in shadow-speak). Ensure that they install into our paths rather than
their own.
Also check that ${base_bindir} and ${bindir} are different before trying
to move files from one to the other; likewise for ${base_sbindir} and
${sbindir}.
(From OE-Core rev: d4e62e164ef73b47c178edcbc2579f5358934afc)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB needs wget to download packages but wget provided by busybox doesn't
support some options such as '-N'.
LSB perl test 4.1.6-2 case all/tst_perlModPresent.pl,
../lib/Class/ISA/t/00_about_verbose and ../lib/Class/ISA/t/01_old_junk.t
fail because of lack of these modules, add them to make test pass.
File CORE/config.h which is provided by perl-dev and file
unicore/version which is provided by perl-doc are required by LSB perl
test cases.
Add perl-dev and perl-doc to packagegroups-core-lsb.
[Yocto #3030#3031#3052#3054#3055]
(From OE-Core rev: ac4a60a1c585bfe5bdce1556303d49bef2594070)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Rebased for packagegroup change -sgw
These perl libraries are being added directly to OE-Core for 4.1
LSB Complainace, when 5.0 comes out early next year (2013), we will
remove these changes.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update package lsb version to be same with current lsb test suit
version. Because when install the suit, it warns that need lsb
version >= 3.0 at least.
Drop the duplicated creating files under /etc/lsb-release.d.
Provides directories /etc/opt and /var/opt that they are required by
package lsb-dist-checker in lsb test suit.
(From OE-Core rev: 973e615ab4ee325ab568f84e001a5724f4b0dd01)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to latest version 20120903
(From OE-Core rev: e14a9921928c774d1817704a0a606d3ac7e4f989)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm can't use the "-" as the arch, which causes problem, e.g., when
MACHINE = "beagleboard":
* The arch should be armv7a-vfp-neon, but rpm only takes the armv7a,
this is incorrect since it is mixed with real arch armv7a.
* The nativesdk's arch should be i686-nativesdk (or x86_64-nativesdk),
but rpm only takes the i686 (or x86_64), this in incorrect since it is
mixed with the arch i686 (or x86_64).
Replace "-" with "_" when rpm package and the rootfs generation would
fix the problem, I think this is fine since it doesn't change the tune's
arch, the package manager doesn't care about the arch's name, but it
needs a unify arch system to avoid confusing. This is similar to what we
have done on the deb which fixed the arch i486, i586 and so on to i386.
[YOCTO #2328]
(From OE-Core rev: fc985f511da86400e4fa7d17555216c12eb51666)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are needed to support upgrading from task-* to packagegroup-*
within existing target images at runtime.
Note: these settings will very likely be moved to a separate inc file
at some point in the future.
(From OE-Core rev: 1b07bd4c6b1ff70267b97f94b25026a8f8ad3314)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If libidn is just populated to sysroot but rpm packages are not created,
build ghostscript will check libidn automatically and then depends on
libidn. But package libidn doesn't exist, so build image which contains
ghostscript will fail with:
| error: Failed dependencies:
| libidn11 >= 1.25 is needed by ghostscript-9.05-r2.i586
| libidn.so.11(LIBIDN_1.0) is needed by ghostscript-9.05-r2.i586
| libidn.so.11 is needed by ghostscript-9.05-r2.i586
Disable libidn support to fix this issue.
(From OE-Core rev: 509eb624c89249ff169de24fed448e8d7894a6f6)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When libidn has been populated to sysroot but rpm packages are not
created, build msmtp will check libidn support automatically and then
depends on libidn. But package libidn doesn't exist, build image which
includes msmtp will fail with:
| error: Failed dependencies:
| libidn11 >= 1.25 is needed by msmtp-1.4.24-r3.i586
| libidn.so.11(LIBIDN_1.0) is needed by msmtp-1.4.24-r3.i586
| libidn.so.11 is needed by msmtp-1.4.24-r3.i586
Disable libidn support to fix this issue.
(From OE-Core rev: a304789cecb1a6ffa3c5a56f617eea4a5ac29a98)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a build issue with wget idn support. When libidn has been
populated to sysroot but rpm packages are not created, wget checks libidn
support automatically and then depends on libidn. But package libidn
doesn't exist, build image which includes wget will fail with:
| error: Failed dependencies:
| libidn.so.11 is needed by wget-1.13.4-r14.3.core2
| libidn.so.11(LIBIDN_1.0) is needed by wget-1.13.4-r14.3.core2
Disable iri/idn support to fix it.
Signer-off-by: Kang Kai <kai.kang@windriver.com>
(From OE-Core rev: 48a11f8dc9f70cfc205f558b4dc959c8b4d5e0cd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License checksum change due to the modification of the pre-compiled
binaries section (no change in the license part).
(From OE-Core rev: a0bfc2e014220ac97e7cd88c9579d5bcb2b1024b)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow references to the old task packages to continue to work. This does
not add RPROVIDES for everything, just those packages that are likely to
have been referred to.
(From OE-Core rev: b41c45972a6d359f034615471959c84aee2bc456)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set a more appropriate DESCRIPTION and remove commented-out line.
(From OE-Core rev: 22b4ba34ad8c08b1a97e56cdc567799f1e1460ef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create package groups covering the Core, Desktop, Runtime Languages
sections of the LSB specification 4.1. Most of the packages were just
moved around or copied in from packagegroup-core-basic (which is
currently included in LSB images anyway) with the eventual aim of
having the LSB package groups be completely independent as well as
following the specification as closely as possible.
(From OE-Core rev: 61b134fd082b4ca2866b98655c5fc3a275834464)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove packagegroup-core-basic-rpm - we already have a mechanism for
ensuring that packaging tools are installed on the target if desired;
we don't need a package group to bring them in as well (especially if
packagegroup-core-basic is used with other packaging systems).
* Remove the poorly-named packagegroup-core-base-utils: we already get
busybox via packagegroup-core-boot.
(From OE-Core rev: e7abf8437c7128e8541411213d262137520456a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides one package group, packagegroup-core-apps-console, which
is usually brought in by adding "apps-console-core" to IMAGE_FEATURES.
Aside from the naming inconsistencies, this is a group of mostly
unrelated packages, none of which are actually "apps". Handling each
one:
* dbus: should mostly be brought in by package runtime dependencies
* avahi-daemon: if you are using packagegroup-base (as all images that
inherit from core-image do) this is brought in by having "zeroconf" in
DISTRO_FEATURES.
* portmap: not very useful by itself; should be brought in by selecting
NFS server/client through other means.
* psplash (or whatever SPLASH is set to): this has been changed to be
an explicit item "splash" in IMAGE_FEATURES. Since this is a fairly
fundamental feature, a piece of code has been added to automatically
handle this for images still using apps-console-core (and show a
warning).
(From OE-Core rev: 592d6e602466628d10704835a7b07d3d713f58e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since package groups don't actually fetch or distribute anything and we
no longer run do_configure we don't need to set this variable anymore.
(From OE-Core rev: 4c511f77e38cbc9d8d633fef3b1ab4cf93440258)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also clean out items already handled by that class (dev/dbg packages,
ALLOW_EMPTY, etc.)
(From OE-Core rev: 65fca4458cfe1d647c7ea1d4588dc449739a73eb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lots of code (such a GLib) expects this to exist and link to the current
timezone definition.
/etc/localtime is a symlink instead of a copy of hard link to make it obvious
what timezone data it's pointing at. For systems with /etc on a separate
filesystem to /usr this will result in a dangling symlink until /usr is mounted,
but as this is early boot the assumption is that anything checking it will
handle that case and fallback to UTC.
(From OE-Core rev: efe305c275f288e248655f3a8b266f86c9893f73)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data files are compiled to a binary but architecture-independent format, so
this package can be allarch.
(From OE-Core rev: 23bf856215fa7c34a71d6086ee355f7c0672dbab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When libaio has been populated to sysroot, ltp will be compiled with
libaio. If rpm/deb package of libaio doesn't be created, bitbake
core-image-xxx will fail with:
| Processing task-core-apps-console...
| Processing ltp...
| error: Failed dependencies:
| libaio.so.1(LIBAIO_0.4) is needed by ltp-20120614-r0.i586
| libaio.so.1(LIBAIO_0.1) is needed by ltp-20120614-r0.i586
| libaio.so.1 is needed by ltp-20120614-r0.i586
| ERROR: Function failed: do_rootfs
Add libaio to ltp dependency to fix this issue.
Similiar to [Yocto #2973]
(From OE-Core rev: 4945eafb7dd0d9e59760fdfad98982937be27517)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since no lmsensors recipe exists by default in oe-core, explicitly disable
support for it in sysstat. In my case sysstat would fail linking complaining
about undefined references when adding my own lmsensors recipe.
(From OE-Core rev: 686a2b5201aa5ebe46162a0ad9d60d87c63486e0)
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remove-gets.patch: removed
- included in the new version
(From OE-Core rev: 396af9e2c8a8b7ad8d49566350d79f05898734a7)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>