In certain cases with BerkleyDB 5.3.x we are getting the error:
db3.c:1443: dbcursor->pget(-30999): BDB0063 DB_BUFFER_SMALL: User memory too small fo
See https://bugs.launchpad.net/rpm/+bug/934420 for more information.
It appears to be some type of a bug in the BerkleyDB 5.3.x. In an attempt
to workaround the problem, when we encounter this situation we attempt
to adjust the size of the mmap buffer until the call works, or we
end up trying 10 times. The new size is either the updated vp->size
from the failed pget call, or the previous size + 1024.
If DBI debugging is enabled, additional diagnostics are printed, otherwise
a basic retry and success message is added to show that the failure was
resolved.
(From OE-Core rev: bfb2906206158748d0be33baf7984cf885756da1)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the optimzation append from recipe and add the patch that is in the rpm
cvs repo, http://www.mail-archive.com/rpm-cvs@rpm5.org/msg08907.html. The -O2
optimzation append is removed since it can limit debugging options that are
provided when -O0 is used.
This was tested by setting: SELECTED_OPTIMIZATION = "-O0"
(From OE-Core rev: d109c6bd163469d6281d20174e4b79cb63483cd4)
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an issue that is caused when doing the install step of rpm on systems
with high parallelization where two jobs of make will fight for the same file
while installing the sub-directory lua. This is caused by the same makefile rule
being called twice in a way that both could be trying to install at the same
time.
This fix renames the linking rule so it will always be run after the needed
files are added and removed it's dependency so the required rule would only
run once.
This was tested heavily using ppss to run mutliple installs in parallel. This
wouldn't happen in practise but it was tested will all the individual rules as
well.
(From OE-Core rev: d05c5da6b972db97d3eb66b659f5641368c9ebe4)
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When attempting to build with uuid and all tests compiling will error because
uuid.h doesn't exist in the rpm tarball. Fix this by changing the include to
use the one in ossp which solves the issue.
The recipe already depends on ossp so ossp/uuid.h will be there when rpm-native
is built.
(From OE-Core rev: 52ae2c2439bcb78323f61a3666e9b630b3a40b15)
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some items were listed multiple times in DEPENDS, avoid this situation.
Note, PR was not incremented as no change to the build process occurs.
(From OE-Core rev: e234af467eac7d0313fae3e87eb1b34725309bb5)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This likely requires some form of license to use in a commercial
product.
(From OE-Core rev: 1d41af288f3db07a5dc47436443daf95e243904f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When merging the xserver-xorg fix the to use RDEPENDS in
xserver-xorg-module-exa the RCONFLICTS has not been removed by
mistake. This drops the RCONFLICTS to properly fix it.
(From OE-Core rev: d83e218dc480a09befddf8b934d774519cdbacb5)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures consistent build results and avoids build failures when compiler flags
change for example.
(From OE-Core rev: a5ff8396cad130f809f8f8da49bb38e6f80f923c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're going around in circles trying to fix the sed expressions and making one case
work and others not work. This patch fixes the base configuration file so we have
non-overlapping substitutions. I've tried to significantly clean up various problems
that were occurring once and for all.
This will hopefully resolve all the issues people have been seeing with incorrect perl
paths.
(From OE-Core rev: 31ff70794ecc431431476f81c8934fff25383613)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also supports a new altivec TUNE_FEATURE
(From OE-Core rev: 4586c24ad156773568cd38794936b8af62e862be)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make same changes for e6500 fpu as done with others
(From OE-Core rev: a39f8c19d0ea5dc92271cbe36a03d638cb806e04)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes builds which were building fine with previous versions of boost
(From OE-Core rev: 139b65affbf50c4230e344cd4d0205ef025bb7c3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is needed in some SDKs that we ship own
version of lex/yacc for sdk host
(From OE-Core rev: 536c9e42d316efb42651fdc2eba1b8548d74329d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to libaio, libcap is another dependency of ltp.
If libcap has been done populate_sysroot but rpm/ipk package is not
created, ltp will be compiled with libcap. So when install ltp to a
image, it complains that package libcap is not found.
[Yocto #2973]
(From OE-Core rev: bf5215f095e7e610508fcefe1224c9289c6c56cd)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_package is a machine specific task at the moment due to packagedata. This means
do_package tasks and their dependencies rerun between different machines
with various duplicate file installations. There are plans to fix this but they're
too invasive before release.
This patch relaxes the whitelist for sstate duplicate file detection to account
for this. Post-release, we re-enable stricter settings once do_package is not
machine specific.
(From OE-Core rev: c858259ce1881c6284f1fc2790c225c81e4a751e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nothing should ever be poking files directly into the staging/sysroot
directories, it should always go through ${D}.
This patch ensures this recipe does this and hence fixes various
potential build issues such as lack of sstate tracking of files.
(From OE-Core rev: 7642143760c0157aba80cea7b427024ee097cc2c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix the installation of xserver-xorg-module-exa package at rootfs
using opkg. It were failing as conflicts where not working properly.
(From OE-Core rev: 8fb19876215a8c7918361e8360c4342d1a933a93)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This requires the changes to bitbake.conf that allow parsing of
license.conf.
As we should now be parsing license.conf, we can move some globals
out of license.bblcass and into the conf file.
(From OE-Core rev: 03e6a7cd27ed109a011fac09cf04412f87f31c3a)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
license.conf hasn't been being parsed. It probably should be.
(From OE-Core rev: b393b31fee3b4d42890c2bcbba09ea231c131dea)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable mentioned in license.conf is LICENSE_PATH. The variable
used in license.bbclass is LICENSE_DIR. Conforming to what is in
license.conf
(From OE-Core rev: c6e13d9cd26d016ab06e7447b307d413e1331aa0)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we fail a network test, a special flag is set in the SanityChekFailed
event. This helps Hob identify the network error properly and display
a special message to the user.
[YOCTO #3025]
(From OE-Core rev: 7877c4344db89237bba5f9a03342bfd9a03aebbf)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
set -e allows to exit if a command fails. We install a trap and execute
emergency_shell() when either the init script exits or when ctrl-c is
typed (say if we are stuck somewhere and we want to debug it).
(From OE-Core rev: ae5e2bd994e3f60d3803ab56e6ed34d08fbc56f0)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- add check_bblayers_conf bitbake function which does the bblayers.conf
v4 -> v5 update if necessary (every layer should make its specific
bblayers.conf upgrades appending to the check_bblayers_conf function)
- we ask the user to re-run bitbake because we can't trigger reparsing
without being invasive
[YOCTO #3082]
(From OE-Core rev: 03ad4edace5db9c6e15ca776d06d20b7d4e42afc)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should be no change to the previous situation unless you
explicitly have pulseaudio in DISTRO_FEATURES_BACKFILL_CONSIDERED
(currently).
(From OE-Core rev: 3d28d16042373e699fabd8576458f65d63463bb9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The version-specific .inc was shared with the xserver-xorg-lite package, but
that doesn't exist anymore.
(From OE-Core rev: 09b1bf350384722127ac9f098a72371cf27c3822)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Solution provided by Donn Seeley in bug 1443:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=1443
worked when testing with core-image-sato-sdk for qemuarm.
[YOCTO #2577]
(From OE-Core rev: 33ec4222c05c985b737e88850259218cf8336d46)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During a from scratch build test, cogl build failed due a missing
dependency on libxdamage.
(From OE-Core rev: 959a2f6d88d8fa6874fff83b7a1f0e7d4e36b887)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit aa66ef6598c84231577d139ec7be413e73fac2b1 since
bdwgc-native fails to build after it. Anything which runs with a
sub-configure will fail after this change. It therefore needs
rethinking.
(From OE-Core rev: f95a9e2c292a1551861220270838cf1eaaba85b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix autotools.bbclass to use relative paths for acpaths instead of
absolute ones. Since absolute paths may cause potential autoreconf
error like:
Can't exec "/bin/sh": Argument list too long ...
This error occurs while building coreutils with long TMPDIR, because
it has bunch of m4 files need to be expanded.
[YOCTO #2766]
(From OE-Core rev: aa66ef6598c84231577d139ec7be413e73fac2b1)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 38234f2e276356b1d77a87ceabc486107e336d19 tried to fix the sed
expressions by anchoring the left side of the search regexp to prevent
$prefix$prefix type expression in the perl config. For nativesdk this is
not enough. Adding anchors on both side fixes this.
(From OE-Core rev: bf84ec0fb9a4d01ea75447c2efe8e534ce975b53)
Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without --without-x the X11 detection would still go ahead and find the host X11
headers, which seems to cause problems at link time.
(From OE-Core rev: d35d19b6d0844daf8ca8aa059c0aa6077c2f573a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It transpires that eglibc has been setting PACKAGES_DYNAMIC = "libc6*" for
some time. However, this is bogus for at least two reasons:
1. Bitbake interprets PACKAGES_DYNAMIC as a regex, not a glob, so this will
match against any package whose name starts "libc" plus zero or more sixes.
This is particularly toxic because the nativesdk variant picks up the same
value and will, consequently, start trying to build itself at the slightest
excuse.
2. eglibc doesn't actually build any packages named "libc6<anything>", other
than the ones that are named in PACKAGES anyway, so the dynamic provider
declaration is in any case useless.
Simply deleting the line is not sufficient since then we get the default
value from bitbake.conf which causes eglibc.bb to fight with eglibc-locale.bb.
So instead we must set it to the empty string for good results.
(From OE-Core rev: 0fbb2e0c1889ee34d7f96266615e891bb44b1d10)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it doesn't make much sense with PV, because xserver-xorg-module-exa
was introduced in
http://git.openembedded.org/openembedded-core/commit/meta/recipes-graphics/xorg-xserver?id=1a666ee1cda3c0b74daba5881fc5f62e13deec66
so our xserver-xorg-module-exa RCONFLICTS with xserver-xorg (<= 1.11.2-r4)
and (< 1.11.2) is not good enough
* because we don't know how many PRINC are in BSP/DISTRO layers,
then it's safer to RCONFLICTS with every older version then current
EXTENDPKGV
Also fixes whitespace to work correctly with opkg
(From OE-Core rev: ed0216d29fc4355c5220f3ad51df04a63cacb0c3)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
--
* I haven't really tested this with IPK, since it was changed from
RREPLACES to RCONFLICTS (because of RPM) and all my installed devices
are already upgraded
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on the previous commit 604d46c686d06d62d5a07b9c7f4fa170f99307d8
(Convert tab indentation in python functions into four-space), the
cml.bbclass was not converted, and in order to properly extend it
with external bbappend's it needs to be converted.
(From OE-Core rev: e4c1c37bb37e9eba635bc0a9308ab593abd299ec)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The chkdupexe utility is fairly worthless and drags perl in as a build dependency
of the whole util-linux recipe. If anybody actually wants to use this script
then we should package it separately, but for the time being let's just delete it.
(From OE-Core rev: 19dd830ff8a1b87499b9a51599265dd436214708)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The platform and platform_extra will be written to /etc/rpm/platform,
the rpm's arch has changed the "-" to "_", so the value in platform
should also be updated.
[YOCTO #3159]
(From OE-Core rev: 9880a5261ca509c69efbafa27cddd9b2b8ca08f0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no initial_solution.manifest in the second build when
incremental rpm image generation, since the initial solution has been
skipped. So we should check it before cat it.
[YOCTO #3128]
(From OE-Core rev: ad17fa82a481ab3c9f17a8338ebad1eb07c0f9d8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set LAYERVERSION and rename the collection to "core". Given changes such
as the tabs to spaces cleanup for python functions in the current
version, this allows other layers to depend on this version of OE-Core
specifically should they choose to do so, by specifying the following
in their own layer.conf:
LAYERDEPENDS_layername = "core:1"
Where layername is whatever value is being added to BBFILE_COLLECTIONS.
(This change does nothing unless a layer has LAYERDEPENDS set.)
(From OE-Core rev: 7069c7ef829f56ae6dd0dab5e583342f351274ed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These were previously being hard-coded to "/sbin" and "/usr/lib" respectively,
resulting in unpackaged files if the configured values were something else.
(From OE-Core rev: fab44bdb346533edd4f702a83523d7c2414f74e5)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LICENSE for ossp-uuid is MIT. As well, the LIC_FILES_CHKSUM
was missing the license text within uuid_md5.c
(From OE-Core rev: 99974820c8b12b1c1b05ab8a96f1b25b8e3888da)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For start-stop-daemon, --make-pidfile is used when starting a
program that does not create its own pid file.
atd would create its own /var/run/atd.pid, so remove this option.
(From OE-Core rev: f10d236cda704cd91e185f8dc9c3f52461e2dad1)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel boot process hangs when /proc/consoles doesn't exists, therefore
check the existence of /proc/consoles before executing pkg_postinst script.
Following is the log when /proc/consoles doesn't exist:
Running postinst /etc/rpm-postinsts/102...
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
INIT: Entering runlevel: 5
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
done.
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
INIT: no more processes left in this runlevel
(From OE-Core rev: 390e7f1f0b1b21d3c0787a6272583d5829561f95)
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Suppress this by removing the unwanted -i.
(From OE-Core rev: 57dcacbd6f35ae2d6b505f044bbefad35da66959)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows BSPs for architectures with no thread support to set (for
example) "GCCTHREADS=no" without having to override all the other configure
parameters.
(From OE-Core rev: 6bb0d37529a82b953d374f2d76c2412d7cee587b)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
(From OE-Core rev: 603daf343ad3f18c8adb799e3625ae2a18d94f56)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current multilib search path code for packagedata is flawed since it
doesn't correctly handle changes in the TARGET_VENDOR/TARGET_OS that
multilib may make. This patch enhances the code to correctly build the
search paths so multilib packagedata is found correctly.
(From OE-Core rev: f50c5d36b2da9b36d56d95a7d89404509a1a3e9b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to split this variable before using it. Otherwise a single "/"
character in the list whitelists every overlapping sysroot file which
was not the intention making the whole thing useless.
We'll start seeing warnings about overlapping files now this is working
correctly after this patch.
(From OE-Core rev: 9e31c748327e92b809330f4ad7b6aaecb2edf559)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to pickup a couple of configuration tweaks that were done
as part of a bump to the 3.4 linux-yocto tree for the beagleboard.
In particular, this updates DVI and USB settings to enable the
perhipherals out of the box.
(From OE-Core rev: 3c562b8360edf52aea6280849fa33e8a0f34742b)
Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the machine and meta SRCREVs to the latest 3.4.x -stable
release.
See git whatchanged v3.4.10..v3.4.11 for the full changelog.
(From OE-Core rev: b164d9776802784a2fee01f2ab267dab4c2beafe)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
(From OE-Core rev: b744f4cc2912334b8493a89525fd02af8e9b8edf)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When doing multilib builds rpm does not find libgcc1 for lib32
multilib because its not honoring the debian renaming scheme for
libgcc-multilib. Lets add MLPREFIX to fix it.
(From OE-Core rev: 9327ca868667b15f29af3123611d6f56b4249a63)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This solves a problem when installing rpm using the ipk pkg-management
system where /var/cache was conflicting with the existing /var/cache from
base-files.
(From OE-Core rev: 917f57cbb0906996661eebc6656c2c083ef979e9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory used as SBINDIR should be ${sbindir} not ${base_sbindir}.
Reported by Martin Jansa <martin.jansa@gmail.com>
(From OE-Core rev: 2c6725c1f8427a0920c2810d649010f98b7869eb)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake has the ability to request to run a command
and if it is not possible fall back to emitting a
log message. This can be used to start a screen
client automatically on the controling tty if
the UI has an interactive tty.
(From OE-Core rev: 39193bdce698b6339c3d7643eb3c1fcd2246fd56)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Passing the data store will be needed for firing a custom event
for the screen class.
(From OE-Core rev: 5ccff8d44626bfd3d1af2a7f81f0567997277809)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These were not getting fixed by orignal committer!
(From OE-Core rev: 7db73c70351939c4be9867981a8cf97148bbe57e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch has been causing some regressions on gold.
e.g. systemd based images segfault and uclibc based images
dont boot. There has been few other reports on the mailing
list. Considering this lets withdraw this patch.
(From OE-Core rev: ecbe671de1553956f83798e1c6fa3ec2fc6a7b4e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
debugfs is another kernel virtual file system that should be mounted
if configured, so if it's configured into the kernel, mount it.
(From OE-Core rev: 55c4d3c55e4c3a7c2cda6d006cf7b78567bd3298)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If all postinsts have already been run during rootfs construction then
there's no point in having run-postinsts in the installed system.
Clean it up at the same time that update-rc.d and suchlike are being
removed.
(From OE-Core rev: b260cf9fbeb6f029c1ce45e77edd03968caa8288)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Need to pass the path explicitly to "make install" to ensure that the binaries end up
in the right locations.
(From OE-Core rev: 3dffb9f577b794e8b78fb884adf9a15c45965bc4)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gives a small but measureable performance improvement for
I/O heavy workloads.
(From OE-Core rev: e4bd65e68c3d0dd798ff69c2e9491e5b2dcafdc3)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It isn't supported to mix multilib and nativesdk in the same target, so
explicitly skip multilib processing if nativesdk is inherited. As a
bonus this fixes a bunch of related "missing file" warnings from the
file checksum code during parsing because BPN was not correctly stripped
for these targets.
Second half of the fix for [YOCTO #3146].
(From OE-Core rev: d9a1eb5054d487affb94431374a9cb1a735e2122)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need MLPREFIX to be set so that oe.utils.prune_suffix() (as used for
the value of BPN) can derive the bare name from the multilib-extended
name for image recipes. BPN being set correctly avoids missing file
warnings during parse from the file checksum code for (unusual) images
that set SRC_URI, such as build-appliance-image.
First half of the fix for [YOCTO #3146].
(From OE-Core rev: ddec9a1b45159c75e97e92abe9a940268acd84b2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't DEPEND on openssl but configure will try to use it if
pkg-config thinks it might be installed. This can lead to failing
and/or nondeterministic builds, so let's force it off.
(From OE-Core rev: 1cdcd754651f8d519ac8e4ba0d241d784e2a0090)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For reasons that are now shrouded in obscurity, autotools.bbclass
has long contained a special heuristic to avoid attempting to run
autoreconf when building autoconf or automake themselves. However,
the wildcard test against PN which is used there is problematic when
trying to build another package whose name happens to start with
"autoconf", and in any case it is silly to do this test at runtime
for every package. The individual recipes for autoconf and automake
can just as easily suppress the behaviour that they don't want by
providing a custom do_configure() method which just runs configure.
(From OE-Core rev: a87db6f8dea71cbb7ead9285ff8af0e28cf75604)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use ${bindir} to locate the binary instead.
(From OE-Core rev: 8cf6f87bd753e1c84a018ddb92a97eed7bd79a28)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have been adding this option to paper over a bug in old toolchain
http://hardwarebug.org/2008/11/28/codesourcery-fails-again/
e.g. is one but these have been weeded out. Therefore let gcc
take the default vectorization optimizations
(From OE-Core rev: e4336ab56db1e07a7f3dc08d3a4de3593b0fad22)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the meta SRCREV to pickup a newer emgd for the fri2 and
sys940x.
(From OE-Core rev: abb23d987184f76fb922af15508f2e251399e3ed)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the lsbtest's list file that we can download the latest
sub-packages of LSB suite 4.1.0 and then run the test with them.
(From OE-Core rev: a2f81aa58c4753412afc0227c34f08134b6a3d2d)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configure script uses a hard-coded value for ${usrsbin_execdir},
which is the path that we know as ${sbindir}. Adjust configure to take
this from the environment if it's set there, and have do_configure()
pass it in.
(From OE-Core rev: 6fdca45ec85e226f570917d2d1aaa2aa39ab6b42)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bash-3.2.48 did not provide the linking from sh to bash, making it unusable.
Moving the license part out of the bash.inc file, and into bash_4.2.bb file makes
us able to use that file also for bash_3.2.48.bb, which makes maintaining both
at the same time a lot easier.
(From OE-Core rev: e7b82cb4d107bfbfa5c939d406dd6ce6615b24e1)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed if installation is done in a directory that needs root
privileges.
(From OE-Core rev: 28823486ba8ce4d88bbad3cea696ce9fba0cc165)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the SVN or git fetcher issues for gcc
and the tar is mirrored around the world so it will
not be slow
Fixes [YOCTO #2908]
(From OE-Core rev: 5e03d1e83d0536a2fc69a88d3e5407108836203f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The globs used for STAMPCLEAN were too greedy matching gcc-cross-initial
stamps for gcc-cross for example. This patch resolves that problem making
the assumption that PV starts with something numeric. This assumption
should hold in most cases and has a better failure case that the current
situation.
(From OE-Core rev: d7fbc70b6c6ac629d2a23ac16ab45461f88b4b26)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define an ALL_QA variable which can be used to determine which tests to
run. Improve the libdir test to work in the case it is set to raise an
error rather than a warning.
(From OE-Core rev: 069992a502658e8e44b870601e2e189cd9596ec9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check in ${PKGD} for libraries in wrong locations.
Trigger a warning if so.
Eg. Catch recipe installing /lib/bar.so when ${base_libdir}="lib32"
or installing in /usr/lib64 when ${libdir}="/usr/lib"
[Yocto #2038]
(From OE-Core rev: 534fa3a55de19f249583207aaeec58fec8154a1d)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREVs to pickup the following configuration change:
594994c meta: use profiling and latencytop features in yocto bsps
(From OE-Core rev: df0197810e72337093ea6ced1c8b28eeeef8a7a8)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch will allow one to run the installer from another directory
than the one where it's actually located.
Suppose the installer is in /home/user/test/my/sdk and the current
directory is in a different place. With this patch, one can run the
installer like this:
$ sh ~/test/my/sdk/poky-eglibc-x86_64-arm-toolchain-gmae-1.2+snapshot-20120920.sh
[YOCTO #3135]
(From OE-Core rev: 3c7aac33cb63dc63b989db4e9d7389a7f4d3c18d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
[YOCTO #3090]
(From OE-Core rev: 6e4923c0c9b218271fd44d78df9987b5cabb1c03)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the installation is done in a directory which already contains a
valid installation, opkg will not install anything and the moving the
contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will
throw some errors. However, the install directory will not be affected.
This patch will ensure that the /install/dir/opt/poky/1.2 exists.
(From OE-Core rev: 1cd01533cbec0e9ed61bbd33ecdf5dc306a32eec)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
[YOCTO #3102]
(From OE-Core rev: 9e6a25e2e9a7f37c3baa0b2949a43ac4127868da)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the cross canadian toolchains are installed, for different
architectures, they might contain common files. This leads to
installation failures since the opkg, by default, does not overwrite
files. This issue happens, for example, for binutils packages (that
contain the same locale files) or gdb (which installs some syscalls xml
files). The locale files could be removed from the binutils
cross-canadian package but we cannot do the same for the syscalls GDB
files which are used by GDB to display user friendly names for the
syscall numbers. Hence, the best solution is to force opkg to overwrite
these files.
[YOCTO #3109]
(From OE-Core rev: 3396545467df05421c3adeb4b5ec532fa95dcb06)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- include /usr/share/aclocal/intltool.m4 into the intltool
package (the files from intltool-dev must be included into the
main package, as intltool is a development tool)
- add missing rdepends: gettext-dev, libxml-parser-perl
[YOCTO #2597]
(From OE-Core rev: f5f3d3fb14e983af114afc6425dc339053927f25)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for fixing the problem:
1) bitbake core-image-sato-sdk with MACHINE=qemux86
2) bitbake core-image-sato with with MACHINE=crownbay
The qemux86's PACKAGE_ARCH is i586, the crownbay's is core2, but several
i586 packages will be installed into crownbay's rootfs though there are
core2 packages. For example, there are:
xserver-xorg*_1.11.2-r7_i586.ipk
xserver-xorg*_1.9.3-r1_core2.ipk
The crownbay.conf says:
PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
What the crownbay's image needs is xserver-xorg*_1.9.3-r1_core2.ipk, but
the xserver-xorg*_1.11.2-r7_i586.ipk will be installed, this is
incorrect.
This is caused by opkg's selecting mechanism: when more than one
candidate is found, it will use the higher version one and ignore the
arch priority.
we have several conf files which set the PREFERRED_VERSION_pkg = "..." ,
but there is no such a mechanism which can let us tell the opkg to
install the preferred version. When the preferred version is higher,
this is OK, but if the preferred version is lower, there would be
problems:
1) Most of the packages are core2 in the image, but several of them are
i586, though we have built the core2 ones, this seems strange.
2) What's worse is that the image may not work since the preferred
version pkg is not installed.
We have set the arch priority clearly in the opkg.conf, I think that
respect to the arch priority is reasonable during the image generation.
Add the "--select-higher-version" option to let the user have another
choice, the default is no.
[YOCTO #2575]
(From OE-Core rev: 0a80a02644f624443cef8cc4f604edb5ef8e6975)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a simple upgrade. Dropping the unneeded patches
and adding --disable-werror to configure since thats is
what one of the patch was doing which was dropped.
(From OE-Core rev: 452f26b6d189b9fafba644e41921091925fb6a47)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* use SRCREV from opkg_svn.bb, because with 596 patches we have won't apply
(From OE-Core rev: 2bf865a9b89eb88c3f7c754362315841195cd8ca)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it was triggered by c02364f36e228835ea5d7fd4e1d347fd451f8544 when new package had 2 entries in Provides and old version just 1
(From OE-Core rev: d98d6ec9425bd8764405c9812cddfcfd2a2b025b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove opkg_0.1.8.bb and the related files since it doesn't work:
- It doesn't support the "--force_postinstall" option which is used by
package_ipk.bbclass.
- It still doesn't work after remove the "--force_postinstall" option,
it can't install the packages in complementary_pkgs.txt.
[YOCTO #3136]
(From OE-Core rev: 526da07578de2c6261d21bc339bca0d3b94d93cf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86-64.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86-64 core-image-x11 kvm
Implements [YOCTO #2550].
(From OE-Core rev: cbb6431b3ee9128ea15c9ae0a19e7d2998ffc561)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86 core-image-x11 kvm
Implements [YOCTO #2550].
(From OE-Core rev: a35d03e2eb905de4eadc9c7df5b50bff1fb7f897)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default to enabling it as we were build-depending on it already. If a user
needs the disk space and the limitations imposed by not using libcroco are
acceptable they can override this.
(From OE-Core rev: e177f1475c55c7d0bf3e2752e6502a7e8577a075)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rpm should depend on bison-native, otherwise errors when "bitbake
rpm-native" in a fresh build:
| make[4]: Entering directory `/path/to/rpm-native-5.4.9-r46/rpm-5.4.9/syck/lib'
| bison -d -t -v -p syck -o gram.c gram.y
| make[4]: bison: Command not found
Basically, both the rpm-native and rpm should depend on bison-native,
but don't need depend on bison, but it seems that it isn't necessary
to add another depend line:
DEPENDS_virtclass-native = "libpcre-native ... bison-native"
So just add it to the DEPENDS.
[YOCTO #3123]
(From OE-Core rev: 839faed2e7ef554668f647732c7ee1c8d339c123)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed in order to run postinst scriplets at do_rootfs time
rather than first boot time.
(From OE-Core rev: 9db6ea4981fe22dd430c13d9f5a838ad92d1afe6)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This takes advantage of new bitbake functionality to clean up stale stamp
files when creating new stamp files.
[YOCTO #2961]
(From OE-Core rev: e21b6c04e512a3bc2339a20045b7041f1d26e859)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes the dependency on a seperate binary which we
don't seem to have. So, use mksquashfs's -comp lzma to
replace that functionality
[YOCTO #3126]
(From OE-Core rev: 8e82713724dfcb40f2ae24a166ec94f50f8b4cd0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RPM does not name it's packages with the Multilib prefix,
but the rootfs_rpm class keeps track of the Multilib prefixs
in a list. Use that list to re-attach the prefix for use with
the license bbclass, buildhistory bbclass will also use this
and make it more accurate between multilib and non-multilib.
Use the embedded "Platform" information to ensure we get all
the correct matching.
(From OE-Core rev: f72abd80b0cc9d27aad2e31ecb548b4ab0fd8f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix is needed for systemd to work on powerpc
(From OE-Core rev: 76f3a1979ea166238e26a2569fb06a4a403bd864)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nfsservctl syscall does not exist for x32, so return an error.
(From OE-Core rev: fddcb9dd086cfb396255ae5c8f717a39c6b9c4b0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix bad runtime dependency that was causing -exa to be a suitable candidate for xserver-xorg, thus resulting in no X server in some situations
(From OE-Core rev: 467c59495d83748d35846e8b37548182fea99cbf)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were 2 issues with this symlink.
1. Is was installed in base_bindidir but packaged in bindir. Fixed to
be packaged in base_bindir
2. The symlink swapoff was created to point to swapon. The problem is
that swapoff is an alternative so it would end up pointing to
swapoff.util-linux which was an inexistent file. The fix is to create
a symlink swapoff.util-linux to swapon.util-linux.
(From OE-Core rev: 0ff32e8fb5463a23af9966afcb58eb00772af65b)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Use mkdtemp for generating temp dir names
- Use bb.utils.remove for removing temp dirs
- Add comment for explaining the "patch" workaround
[YOCTO #3070]
(From OE-Core rev: fbe9fc4d5ece1e66b03b4c4bce9b7ffad3b5b138)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uprobes depends on functionality provided by perf events. After
uprobes was enabled in the standard kernel the mpc8315 board showed
link errors due to missing perf event functions.
This problem isn't isolated to the board or powerpc arch, but all
other boards have PERF_EVENTS enabled. To fix this, we make UPROBE_EVENT
select PERF_EVENTS, and any new boards will be protected from the
same failure.
We also update the configuration fragments since CONFIG_UPROBES depends on
CONFIG_PERF_EVENTS being set, so PERF_EVENTS needs to be added whenever
uprobes are enabled.
[YOCTO #3111]
(From OE-Core rev: b681b74624d1c8c4c98b2a121828e010fc5c3a25)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, SRCPV is just listed as having a value of ${@bb.fetch2.get_srcrev(d)}
which isn't helpful. This can mean that if PV changes, two recipes can have the
same sstate checksum despite having different PV values since the PV value itself
isn't tracked anywhere.
Adding this line means that the real PV value is expanded and recorded in the sstate
checksum, meaning the sstate packages no longer overlap. This is critical in ensuring
consistent builds for revipes using SRCPV.
(From OE-Core rev: a9fffadec4fb60547257cb3d7496b6e39ed07be8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing dependencies, we need to look for both the SW_INSTALL and
SW_UNKNOWN states. If we don't do this, dependencies can be missed
and preinst scripts can run before dependencies are all installed.
This leads to package installation errors for packages like dbus-1
and associated user permission errors.
(From OE-Core rev: 119ef2789484222b94559675a09adc399f3b6bf0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches not needed anymore - they switched to cmake.
LGPL license was replaced with the actual LGPL 2.1 file.
License section in audioproperties.h file was modified as it includes the
new address of Free Software Foundation.
libtag static library is not built by default anymore and if cmake is
instructed to build static library than shared library is deactivated.
So actually this is a switch now.
(From OE-Core rev: 312efe73dad8a9baf32578bd11a1654219d759df)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are fixes mainly cherrypicks for mips/ppc/x86
mainly fixing PRs in ld and gold
(From OE-Core rev: f098cfc24bae8e0685bcae53ea4fdc3326ddc6c4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to pick up virtio and kvm guest
configuration fragments.
79947f1 meta: add paravirtualized KVM guest config fragment
3ed86ed meta: add MMIO support in virtio config fragment
(From OE-Core rev: b6b5b501fbe7158f190e887c3edc1214bb3671ed)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was reported that the kernel configuration checks for custom yocto
kernels had the following output:
NOTE: validating kernel configuration
grep: /meta-series: No such file or directory
grep: /meta-series: No such file or directory
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded.
which is not inspire confidence in the output of the process.
Completely inhibiting the check is one option to remove the messages,
but that removes the ability see output, which can help move users to
a better or more fully configured linux-yocto based kernel.
To fix this, we have to ensure that the path to the meta-series is
always valid, and that the tools can deal with not all files existing
in the audit directory.
Since custom yocto kernels do not set KMETA (they don't have a meta branch),
we ensure that a default of 'meta' is passed to the audit ('meta' is always
valid), and that kconf_check itself can deal with an incomplete set of
input audit files.
The net result is output like this (using a defconfig with invalid options
for the kernel being built):
NOTE: validating kernel configuration
This BSP sets 19 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/invalid.cfg
There were 1 instances of config fragment errors.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/fragment_errors.txt
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/missing_required.cfg
(From OE-Core rev: 4d1b7dae063ee4c35c426306d0e22f11ce112c72)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a number of cases where pseudo used plain old stat()
to get dev/inode data for files; on 32-bit hosts, this could fail
if the files were over 2GB, causing pseudo to prevent removing of
large files. This is fixed in 1.4.1.
(From OE-Core rev: 056eddc4299d10ddafe0da3dc768bd80d0c1b96b)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes :
- Added ax_append_flags.m4 and ax_check_compile_flag.m4 to the m4 directory.
The files were missing and aclocal.m4 was generated without those two macros.
- Added a new license md5 checksum to the recipe because the old LICENSE file
differs from the new one here :
OLD : libffi - Copyright (c) 1996-2011
NEW : libffi - Copyright (c) 1996-2012
(From OE-Core rev: 3e40136e8bd13b17b6d88b6acfb5ed162bb8d96a)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This likely requires some form of license to use in a commercial
product.
(From OE-Core rev: 6499d4900d8e078447335332d4e186f58b93d63b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Git requires python by default as an included script to link git
to perforce is written in Python. Define NO_PYTHON to stop the
script being included and thus remove the dependancy on Python.
(From OE-Core rev: 602538e1c8403e8b188109ce94a906a1d9090d7e)
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if
base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an
unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if
IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So
let's add the round up code after the base_size calculus and it's
comparison.
(From OE-Core rev: 726c1617077da6b49606ac1a2cae64d2d02e6214)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was noticed by the following warnings of files that should have been removed!
WARNING: QA Issue: kernelshark: Files/directories were installed but not shipped
/usr/share
/usr/share/trace-cmd
/usr/share/trace-cmd/plugins
/usr/share/trace-cmd/plugins/plugin_blk.so
/usr/share/trace-cmd/plugins/plugin_sched_switch.so
/usr/share/trace-cmd/plugins/plugin_kmem.so
/usr/share/trace-cmd/plugins/plugin_kvm.so
/usr/share/trace-cmd/plugins/plugin_function.so
/usr/share/trace-cmd/plugins/plugin_jbd2.so
/usr/share/trace-cmd/plugins/plugin_hrtimer.so
/usr/share/trace-cmd/plugins/plugin_mac80211.so
/usr/share/trace-cmd/plugins/.debug
/usr/share/trace-cmd/plugins/.debug/plugin_blk.so
/usr/share/trace-cmd/plugins/.debug/plugin_sched_switch.so
/usr/share/trace-cmd/plugins/.debug/plugin_kmem.so
/usr/share/trace-cmd/plugins/.debug/plugin_kvm.so
/usr/share/trace-cmd/plugins/.debug/plugin_function.so
/usr/share/trace-cmd/plugins/.debug/plugin_jbd2.so
/usr/share/trace-cmd/plugins/.debug/plugin_hrtimer.so
/usr/share/trace-cmd/plugins/.debug/plugin_mac80211.so
(From OE-Core rev: c3cff64708cb078405f5ecd9bca6801031786bc4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We must use one TMPDIR per process (/tmp/${PID}) so that the patching
processes don't generate the same temp file name (the "patch" program
uses the TMPDIR environment variable for deciding where to create the
temp files).
[YOCTO #3070]
(From OE-Core rev: 16dbf505c4fdd9fe1820d950ab05c8ea99ad7505)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is causing systemd based systemd to not boot
Revert of patch has been tested on tip of master hence the new SRCREV
New SRCREV brings in one another regression fix as described here
http://lists.uclibc.org/pipermail/uclibc/2012-August/046993.html
(From OE-Core rev: c24d518b76f07d86de03259048035407ae3bde68)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the newly separated hwlatdetect package to the rt images.
While this pulls in a python dependency, it is worth have hwlatdetect
installed by default on these images as they are intended to assist in
the evaluation of platforms for use in real-time environments.
(From OE-Core rev: 835654994574c158d6324218ebe000bd2ef9a792)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split out rt-tests into rt-tests and hwlatdetect packages as the latter
requires python and we want to be able to install the core rt-tests on
minimal systems without python.
This also addresses QA warnings about the hwlatdetect files not being
packaged.
Add an RRECOMMENDS on the hwlat kernel module package for the new
hwlatdetect package as the python test requires the kernel module to
function properly (but we probably don't want to kill a build if the
exact kernel module package is not available).
(From OE-Core rev: 0ea5e5a805e038ecfeb6b87ca05c021c5f72c5e9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The maintainer of rt-tests has recreated the git repository on kernel.org and
has stated that kernel.org is now the official source for rt-tests.
Update to 0.84. Remove the user cflags and ldflags patch as it is
included in the 0.84 release.
(From OE-Core rev: cdf84de3584e17b7fea2401cdb4eaae9752e98a2)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_install needs command 'msgfmt', it would fail if the command
doesn't exist on the host, add DEPENDS gettext-native to fix this.
[YOCTO #2811]
(From OE-Core rev: f12f75aa57cacc73a0428cedba970076f0abb9f8)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With linux-libc-headers-3.5.0 (for tests) the error message was:
| gstv4l2bufferpool.c: In function 'gst_v4l2_buffer_new':
| gstv4l2bufferpool.c:184:3: error: 'struct v4l2_buffer' has no member named 'input'
(From OE-Core rev: 95e3463ddcb527ffad41699719963107ad24a34f)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
following is the error message:
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/ld-2.13.so:
--2263-- Can't make sense of .got section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /home/root/lzh:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_core-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_memcheck-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/libc-2.13.so:
--2263-- Can't make sense of .data section mapping
(From OE-Core rev: 14626cc76210ed6fe40316a311f24147ed8de8be)
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When x32 is the tuning for a x86 MACHINE, the kernel should also have
CONFIG_X86_X32=y. This adds a x32 fragment that can be used to trigger
the right ABI.
The commit also contains a check for mx32 in TUNE_FEATURES, and if
present, the new fragment will be appended to KERNEL_FEATURES and
trigger the support in the kernel.
cc: Saul Wold <sgw@linux.intel.com>
(From OE-Core rev: bf689c60caa905eb8866101b9e99dd4ae246a2ca)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, settle all found licenses into one line and report warning
about missing licenses loudly.
(From OE-Core rev: f015a9eb8265c485da0b20009ba72119035599b1)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial change, do not cut off plus symbol from license name, otherwise
information about package license is corrupted.
(From OE-Core rev: ba53de38e96833ea82ddd0f1e336cd7ddfa0c2d1)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial change, process LICENSE_${pkg} and LICENSE values. This fixes multiple
cases, when license is not specified at all in license.manifest
(From OE-Core rev: 8fd734e6f9159921d0d148c4d5c0fa37c882b21a)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, which improves code perception. Also check for locale
packages firstly, this shall improve performance a little.
(From OE-Core rev: 100e457de4b223defb1a844d3b85af812caf2f79)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, saves space and reduces code line length.
(From OE-Core rev: 0ac50f848cf0f897333cff9340976519fc95fdc4)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 13544fbc6217fee1731a6da1e2cf94901a500842 changed the ordering
of PACKAGES so that ${PN}-dev came before ${PN}. However, this caused
the FILES matching to go wrong if ${libdir} == ${base_libdir}. Fix this
by moving ${PN} ahead of ${PN}-dev once again.
(From OE-Core rev: ec3ec1e7388c2175f41527d5e5e07c6bb14a8f6e)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
(From OE-Core rev: 019a95a5e01bd3fefaaab0a27029ed8b26ee3c79)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is sometimes useful for KERNEL_FEATURES to be set in a machine
or other configuration file. The linux-yocto recipes currently
initialize the variable, which clobbers any values set by .conf
files.
Appending to the variables allows these settings to propagate to
the kernel configuration, while maintaining the existing set of
added kernel features.
(From OE-Core rev: 7121fe8d836fc178e9ab8f0e6f8eb34a99325c81)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It makes sense to us the license checksum from the source .in file rather
than that from the generated file which configure can change (or remove).
(From OE-Core rev: 38b853b669428c8ac390ee7dd063331b6f03476e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
(From OE-Core rev: f15f61af77cc4e52a037f509f8e49e1ea530cf35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
User mode emulation binaries are linked using a local linker script. The
nativesdk ones were not used and the resulting binaries did not have the
interp section resized. Hence, those binaries could not be relocated.
[YOCTO #3083]
(From OE-Core rev: da014e900adfe96f01290c5a8f5fb08e295ca204)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can now rely upon the minimum BitBake version having the
SanityCheckFailed event, so remove the code to handle if this is not
there.
(From OE-Core rev: ba17572c9c11efb45a92ba97914ce1f6d84002c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is no valid machine configuration it's almost guaranteed that
the tune checks will fail, so just suppress them in that case.
(From OE-Core rev: 629c585e687cda9290efcffd18dd92fdf16009ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext 0.16.1 is a GPLv2 version of gettext. Making that extend native and
nativesdk makes sure we use the same version of gettext for compiling internally
as well as in our toolchain.
(From OE-Core rev: 6322a1b3680d2480c96433fde5a913b3bf2d09ea)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to 3.4.10 which has been soaking for a bit now, as well
as picking up the following meta commits from Tom Z:
a82db2f meta: have systemtap use kprobes and uprobes feature
d5d5b80 meta: add kprobes support to ktypes/standard
b32d373 meta: add kprobes feature
d40ed99 meta: have uprobe feature use uprobe.cfg
a69d1db meta: add uprobe.cfg
(From OE-Core rev: fb71d8c3ab735739baedcb5c8c44b028890d8a5e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the libgcc builds identical when done with gcc-cross-initial
or final gcc-cross. Since eglibc only sees gcc-cross-initial it is
important that the final libgcc that appears on root file system is same
as the one against which eglibc was built.
(From OE-Core rev: bd0ab094d6c36b55848e23e63b96587773299a7f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
arm patch is a forward port from OE/classic
ppc patch should help in building images with Os
(From OE-Core rev: ac9ebcea4a2b778f6dd103a729831d9a9be281df)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apply a patch from upstream git, and clean up our other patch so that it
applies.
[ YOCTO #3056 ]
(From OE-Core rev: b0d23a1e3335ccd9bdc5b6512020ff3321619abf)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GNU make 3.82 has a bug where it drops required dependencies.
https://bugs.webkit.org/show_bug.cgi?id=79498 is the WebKitGTK+
bug, and http://savannah.gnu.org/bugs/?30653 is the GNU Make bug.
Work around this by running make again if it fails just in case the failure is
due to the bug.
Based on a patch by Andreas Müller <schnitzeltony@googlemail.com>.
[ YOCTO #2816 ]
(From OE-Core rev: af5bdc8ca413d6cabeb4f4b4c5836912a17f28be)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These values need to be passed on the command line to "make install" otherwise
shadow will use its own built-in idea of where those directories are located.
(From OE-Core rev: 2b4b5f3259be4b790c098fc98cae0275ac6804a0)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The makefiles in the shadow package have their own hard-coded paths
for ${base_bindir} and ${base_sbindir} (known as "bindir" and "sbindir"
in shadow-speak). Ensure that they install into our paths rather than
their own.
Also check that ${base_bindir} and ${bindir} are different before trying
to move files from one to the other; likewise for ${base_sbindir} and
${sbindir}.
(From OE-Core rev: d4e62e164ef73b47c178edcbc2579f5358934afc)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module is, apparently, included in the standard perl distribution
since 5.10.1 or so. The regular perl recipe has had this PROVIDES for a
while but it seems to have been overlooked in the native version.
(From OE-Core rev: 2c3e8c5ab098f84c77729377afc240bc71d81665)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It appears that the qt4.inc had a copy/paste error relating to creating
a list of staticdev packages, that caused them to show up as dependencies
in the -dbg package.
(From OE-Core rev: a7c5cec5fc63b4a26d84673460426b35669068dc)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existence of a /etc/hostname file causes any hostname provided on
the kernel command line or via dhcp to be overwritten by the
initscripts 'init.d/hostname.sh'. This change allows you to set a
value of "" for 'hostname' which will skip the creation of the
/etc/hostname file by the base-files package.
(From OE-Core rev: 5fd3503d4a438d126f44fe8118e9ea465e7699c2)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When called with the complementary install option, the first step is to
backup the install manifest so that we can avoid installing items previously
installed. However, this backup process skipped the initial_install portion
of the manifest, causing early install items like libc6, bash, and base-files
to be installed a second time.
Fix this by cating the files to original_solution. This is done as an append to
allow multiple calls to package_install_internal_rpm to work.
(From OE-Core rev: af9fd7566a5de4716a202922f5eabb13a412f2fb)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the image.bbclass is called with arguments, and these arguments are not
"populate_sdk", they will be passed in as the expected GLOBS.
This enables external components and scripting to use the
rootfs_install_complementary code.
(From OE-Core rev: f44c5f227a170290f567d0a0a24baaa870048788)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Appending to EXTRA_SSTATEMAPS is better than just hardcoding a value. Also
add a comment about why this is necessary.
(From OE-Core rev: d4f4a57b8d564d57256017d937ed2eabf94c36ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using a rather error-prone method of looking for output
package files in order to determine if a package got created, use the
.packaged file within pkgdata.
This fixes two separate issues:
* Some packages apparently not being found by this code e.g. all
apm/apmd packages when using ipk packaging.
* Buggy implementation of this checking code which triggered an
exception during the event handler if PKGV was overridden on a
per-package basis (as it is with external-sourcery-toolchain), which
blocked Hob from completing parsing at 99% - fixes [YOCTO #2651].
(From OE-Core rev: 48169c6bc44c546cecaa06207b6c36da558b81f7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a function that can be used from BitBake code which will find
signature data (sigdata/siginfo) files based on specified criteria, and
hook it into BitBake as bb.siggen.find_siginfo.
(From OE-Core rev: 9f0453c29891e32f8038c4bbc22ada28bfbf818a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a lot of armv7 and sh4 fixes that
its worth moving to latest version. The patch
forward porting can happen later.
(From OE-Core rev: 1b91e597f3550c35605d6b15fd958376e3dde93d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forward port the patches which were not applied upstream
(From OE-Core rev: 0c1328a27881f1b3046ed527447608a9fa91b1ea)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB needs wget to download packages but wget provided by busybox doesn't
support some options such as '-N'.
LSB perl test 4.1.6-2 case all/tst_perlModPresent.pl,
../lib/Class/ISA/t/00_about_verbose and ../lib/Class/ISA/t/01_old_junk.t
fail because of lack of these modules, add them to make test pass.
File CORE/config.h which is provided by perl-dev and file
unicore/version which is provided by perl-doc are required by LSB perl
test cases.
Add perl-dev and perl-doc to packagegroups-core-lsb.
[Yocto #3030#3031#3052#3054#3055]
(From OE-Core rev: ac4a60a1c585bfe5bdce1556303d49bef2594070)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Rebased for packagegroup change -sgw
These perl libraries are being added directly to OE-Core for 4.1
LSB Complainace, when 5.0 comes out early next year (2013), we will
remove these changes.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module is deprecated from perl 5.003_06.
But LSB perl test 4.1.6-2 still test it.
So add it.
[Yocto #3031]
(From OE-Core rev: 8228aa1f6bc1ee5ecddd78ce43d5ebfc0eed2d3c)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB perl test 4.1.6-2, all/tst_perlModPresent.pl 1 fails with:
test 88 'use File::CheckTree;' failed
Add it to fix this issue.
[Yocto #3031]
(From OE-Core rev: af5141135d0888ea1f72cd63c454bc82884ec567)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just add it for LSB 4.1 perl tests.
[Yocto #3031]
(From OE-Core rev: 16be305db800c976e6241973e0cf176b954de8e4)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB perl test 4.1.6-2 case all/tst_perlModPresent.pl 1 fails with:
test 44 'use Dumpvalue;' failed
So add libdumpvalue-perl to fix it.
(From OE-Core rev: 0141967e4a721586c2c04252aae3b8e3732f53c3)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB perl test 4.1.6-2 case all/tst_perlModPresent.pl 1 fails with:
test 190 'use Pod::Plainer;' failed
Add libpod-plainer-perl to fix it.
[Yocto #3031]
(From OE-Core rev: 0c26ced44326280f65f574c6ffb2dc1392a2f79e)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package modules Pod-Html and Tie-Hash-NamedCapture.
Without module Tie::Hash::NameCapture.pm, call "use English;" will fail.
Module Pod::Html is required by LSB perl test 4.1 case
all/tst_perlModPresent.pl 1.
[Yocto #3031]
(From OE-Core rev: e8d4386b48e169f126dd2fa018b3f44c8a42eef8)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perl module Class::ISA is needed by LSB 4.1 perl test, so add it.
When LSB 5.0 release, it will be deprecated. But we need it now.
[Yocto #3030]
(From OE-Core rev: f2e8d7670d926aa88c3c38996d1a216812741dd2)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for board specific fw_env.config file if available.
(From OE-Core rev: 5b6a8e987f9039aca63d97bc42421b78acab8a3d)
Signed-off-by: Franklin S. Cooper Jr <fcooper27jr@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows root to login over ssh with an empty password just like
dropbear when the debug-tweaks are enabled, it's important to disable
debug-tweaks for a production system as this will leave open a security
hole!
Thanks to Marc for the settings.
Cc: Marc Ferland <marc.ferland@gmail.com>
[Yocto #3078]
(From OE-Core rev: 13e6aa8bba6ab1ebba1efa23f94af379a8fcb6a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the distro doesn't have the opengl feature there's no point building the DRI
or GLX support, making the mesa-dri build dependency optional.
(From OE-Core rev: 73d02f6b121c8b0ed2d42de0bfd6c227fd4de41f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building xserver-xorg and not installing the DRI and GLX modules (and so not
Mesa) results in an increase of 16kb compared to this package.
This isn't worth the effort of maintaining two packages.
(From OE-Core rev: 586835801a11e514a10228be957713e1ce90dd44)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adapt autoconf to pass --warning=cross to automake only if
supported.
[YOCTO #842]
(From OE-Core rev: 16d1c8f076378d0878f332f83b7e1f5fcf16447d)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc calls out mconf and conf directly so lets create
symlinks to point to their kconfig- counterparts
(From OE-Core rev: 5857772e285ad6e39b7216bc542189e45f6fdbf7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will let eglibc use kernel like option
management through kconfig
(From OE-Core rev: 4282b86072fd5a916d0d12082d6ba575bce691f2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pixman-native can have different do_configure sstate checksums if it's built with armv4t machine and armv7a
OE @ ~ $ bitbake/bin/bitbake-diffsigs
before-mgmt/stamps.1346795706/nokia900/x86_64-linux/pixman-native-*.do_configure.sigdata.*
after-mgmt/stamps.1346801508/om-gta02/x86_64-linux/pixman-native-*.do_configure.sigdata.*
basehash changed from 27e577de60880a788c7aaba797ef83e0 to c6799807eb3e767daf1e75738fc753f7
Variable NEON value changed from to --disable-arm-neon
* so if you start building with different machine then last time (wrt
NEON setting) all recipes which depends on pixman-native will be rebuilt too
* this explains why sstate-cache-management.sh wanted to remove many
native sstate packages when --stamps-dir option was used (see comment
28 in https://bugzilla.yoctoproject.org/show_bug.cgi?id=2897)
(From OE-Core rev: 0b466e6677208aeefdfa15aa37bd4681eda166c8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check ${target_rootfs}/etc/passwd rather than
${target_rootfs}${rpmlibdir} to make sure that it has been previously
installed.
* Remove the "--nodeps" when incremental image generation, it should
take care of the dependencies. Still use "--replacefiles --replacepkgs" in
case there are conflicts.
[YOCTO #3047]
(From OE-Core rev: 2b3df2ec7979a49842df172be442a8794fe68fff)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update package lsb version to be same with current lsb test suit
version. Because when install the suit, it warns that need lsb
version >= 3.0 at least.
Drop the duplicated creating files under /etc/lsb-release.d.
Provides directories /etc/opt and /var/opt that they are required by
package lsb-dist-checker in lsb test suit.
(From OE-Core rev: 973e615ab4ee325ab568f84e001a5724f4b0dd01)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to latest version 20120903
(From OE-Core rev: e14a9921928c774d1817704a0a606d3ac7e4f989)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used for the binary package recipe, it's been suggested that it
would be a useful feature to be able to easily take an RPM or similar
containing a software binary from a 3rd party software vendor and
integrate it into an image created by the build system.
* Brief introduction
- The binary pkg can be .rpm, .deb, .ipk and other formats which can
be unpacked by bitbake fetcher.
- Let bitbake unpack the bianry package, just like unpack the source
package.
- Skip the do_configure and do_compile.
- Install the files to ${D}
- Other steps are similar to the source package's recipe.
* Note:
- The "subdir" parameter in the SRC_URI is useful for the binary
package recipe, so I added an example in the comment.
- I have sent a patch to bitbake-devel mailing list to support
unpack the .rpm, .ipk, and .deb files.
[YOCTO #1592]
(From OE-Core rev: 7037f52909b8226d2afed4ac73c902d410afc112)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm can't use the "-" as the arch, which causes problem, e.g., when
MACHINE = "beagleboard":
* The arch should be armv7a-vfp-neon, but rpm only takes the armv7a,
this is incorrect since it is mixed with real arch armv7a.
* The nativesdk's arch should be i686-nativesdk (or x86_64-nativesdk),
but rpm only takes the i686 (or x86_64), this in incorrect since it is
mixed with the arch i686 (or x86_64).
Replace "-" with "_" when rpm package and the rootfs generation would
fix the problem, I think this is fine since it doesn't change the tune's
arch, the package manager doesn't care about the arch's name, but it
needs a unify arch system to avoid confusing. This is similar to what we
have done on the deb which fixed the arch i486, i586 and so on to i386.
[YOCTO #2328]
(From OE-Core rev: fc985f511da86400e4fa7d17555216c12eb51666)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This mirror entry which maps to itself plus a slash, if matched, put the
fetcher into a circular loop until the stack space is exhausted. A patch
has been sent to fix this issue in BitBake, but we should remove the
bogus entry as well.
(Note that this entry does not actually trigger the issue with current
master because the gnutls recipe now uses GNU_MIRROR instead of
ftp.gnutls.org, thus the bogus mirror entry is not matched.)
(From OE-Core rev: 0de1827a9601143b090f751ea702fdb65a936b77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new variable "IMAGE_EXTENSION_live" for Hob to map image type
"live" with real image file extension names.
This is for Hob to remove the hard-coded maps.
(From OE-Core rev: fe0973df7c72b1acec7feae03a4e13c1f49c8b1f)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rsync_2.6.9 is the only rsync recipe in openembedded without GPLv3 license, but it lacked the
checksums for the fetcher.
(From OE-Core rev: 1016edcadb22c1655e1a902601118ec3c7332fea)
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It has been pointed out several times that the yocto mpc8315e-rdb
reference was using the wrong tuning (603e), since it is actually
a e300c3 board.
This commit creates a e300c3 tune file based on the e300c2 variant
already in oe-core.
This commit also inhibits altivec in flac when this new tuning is
enabled and used by the mpc8315e-rdb
[YOCTO #1192]
(From OE-Core rev: 8663c7ba0530eb36728fe524ed0137e064cc1c5a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples pull in a GTK+ build dependency, so remove that too.
(From OE-Core rev: eef5cca4f364545759d8cf624f38e3cd6e8fd295)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure this listing is complete. (Comment change only.)
(From OE-Core rev: f9df0be3790ca837e43c41633d17e6ee851cb01d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ConsoleKit is a runtime dependency for the ConsoleKit module, but there isn't a
build-time dependency.
(From OE-Core rev: 3e05e52821e6042708a37421423601e9fe59116e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They just need GTK+ not libglade, so fix the depends.
The recipe also had multple checksums, so remove the old ones.
(From OE-Core rev: 68f320b2c4c6a6e284e6f6f24791a197f3464f36)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By having a high priority it will be installed instead of the mini-x-session
when both are in a give set of packagegroups, as it stands now the
mini-x-session is installed by default on sato which is wrong!
(From OE-Core rev: d9fde0aaab26cbd657ffa56781754c85eec6f83a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTOADT_REPO within adt-installer.conf was hardcoded to
http://adtrepo.yoctoproject.org/${SDK_VERSION}
This allows it to be overriden in local.conf by setting
ADTREPO = "http://adtrepo.yoctoproject.org/${SDK_VERSION}"
I'm also fixing a bad rm in do_populate_adt. The file name
that is being rm'd is wrong.
(From OE-Core rev: 610f8c0c0cab8e258919689fd641faec28b58caf)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the file moved from xserver-xorg to xserver-xorg-module-exa, the latter needs
to "replace" the former to ensure a smooth migration when upgrading the
packages.
(From OE-Core rev: 45a4e2064991555570f346e0662a57e61c947acf)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As nothing in oe-core uses gsettings, it wasn't noticed that the whitespace is
wrong.
(From OE-Core rev: 1c2afda021f7abf88bc08400beba53c603912382)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for the build appliance and Hob also
(From OE-Core rev: e177b0dcf9b39130d4a2a4dd1ea5af72b3cc87a3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add new packagegroup-core-x11-server to SIGGEN_EXCLUDERECIPES_ABISAFE,
so that recipes depending on it are not rebuilt after every machine
swtich
* allows to remove task-x11-server and task-x11 from meta-oe without
loosing any functionality
* be carefull with default XSERVER value which does not have
xf86-input-mouse and xf86-input-keyboard)
* VIRTUAL-RUNTIME_xserver_common which defaults to x11-common in oe-core
and xserver-common in meta-oe's task-x11
(From OE-Core rev: a398c96706c119f298f57a929a317fcf8e0f5b92)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
