Edits to "Adding a New Machine" and "Working With Libraries".
Minor corrections.
I did do a significant rewrite of the first two sections of the
"Adding a New Machine" section as it was very poor.
(From yocto-docs rev: 0a030e44f0f1bf2bb204f24b63b4ddfc0cde8252)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 8e0de3f767af4b2ca182d9f321bd3c8286773913)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor items fixed.
(From yocto-docs rev: a57772d157a3340d6ae707990d6076e344e15c75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits applied.
(From yocto-docs rev: 1897997ad3ef3ada76de77c7fb886fb624dcdfdb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several items taken care of here. Of note are the retiring
of three BSPs (Chief River, N450, and sys9* stuff).
Also of note is that Kepler recommended version is now 4.3.2 and
not 4.3. The interface changed a bit as well in the section
for installing that stuff.
(From yocto-docs rev: 61bf82c1e68156d32a81e4c76dbb29db14665ffb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes are a result of a detailed read-through prior to
releasing YP 1.6. The changes are varied and random.
(From yocto-docs rev: 04c09abf96a04c3ffeea8cdf7be8e1bb1b9055c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure had a wrong box label in the right-bottom box.
I changed it to be like a local Git repository area as it should
be.
(From yocto-docs rev: 2963152decb2d3983180a0af9896e822c865f5cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a read-through of this chapter in preparation for the YP
1.6 release. Found several little areas that needed attention.
(From yocto-docs rev: 73d56a4c948c675afd4cde0e3321a944a02013cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to add a cross-reference anchor tag to the term in Chapter
3 and then the link itself.
(From yocto-docs rev: 227c8ce85f4a8e81f14582cdc7c54b5b832d3aa0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a few things as part of the read through prior to the
1.6 release. In particular, I added the link for the BitBake
User Manual, which is now published alongside the YP manuals.
(From yocto-docs rev: af779a5a70790d9c15584e1a463e1f0a5c79987f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied proper formatting as the reference is to the actual
command.
(From yocto-docs rev: b49cb8968a1f915b5dd52b4f38abc88319cc3f79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some occurrences needed formatted into a <filename>bitbake</filename>
form as they are actual command references.
(From yocto-docs rev: e7bc7161613222374e39fdf7f09c460900d52441)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed a link to the term "BitBake". Also, reformatted the
occurrences of "BitBake command" into "<filename>bitbake</filename>
command as they are actual command references.
(From yocto-docs rev: 0a6540948edfca1f9c7c0b880d78252c5da0d8cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to the wiki had some extra instruction in there that
was bogus. I removed that.
(From yocto-docs rev: 9dab5c3c8d0ee2b3ff84a4b94bda8f0420c438f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The start of this manual was odd. I created a new "Introduction"
chapter and inserted it into the build file (adt-manual.xml).
This new chapter introduces the manual. That left the remainder
of the original first chapter to be able to focus on what it
really needed to talk about and that is the ADT. It is a better
organization.
(From yocto-docs rev: 9d489abad9ccd4c0893d7496282f0843d4154942)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I integrated the terms "BitBake" and "Poky" into the first
paragraph. BitBake was not there. And Poky was not really defined
in any meaningful way. Also added some cross-reference linking
to the terms in the dev-manual.
(From yocto-docs rev: 14159d400ef51eb4cc5b0b9c03a608b84c20f278)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The first occurrance of this term should at least have a cross-
referencing link.
(From yocto-docs rev: 773c942fd64e4d6025fbef0838d5c7136ef35035)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did the following to the yocto-project-qs.xml file:
* I integrated some cross-referencing to the BitBake User Manual in
a few spots.
* I fixed a few grammar items.
* I also noted the super user system uses four cores.
I did the following to poky.ent:
* Added a new variable for links into the BitBake User Manual.
Variable is YOCTO_DOCS_BB_URL.
(From yocto-docs rev: 3eba14c0dc9e71dfcf967d76e4525b26ac02c9c2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-cast the section where we describe getting a copy of of the
Yocto Project such that we recommend cloning poky now.
Aside from this change, I found some other minor tweaks that needing
fixing.
(From yocto-docs rev: f10fc4afabddce8bd6296e83c4fecbbbd4683140)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I do not use these in the documentation.
(From yocto-docs rev: 856c523a487fe0cd4674c69333a87b29b50d87c2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This link was going to the documentation. Also, the URL was
out dated.
(From yocto-docs rev: 0f8d4f934af4e29f93b501e215e49defda791071)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5931]
Added descriptions for the following variables in the glossary:
* MODULE_IMAGE_BASE_NAME
* KERNEL_IMAGE_BASE_NAME
* PKGE
* PKGV
* PKGR
* PKG
The first two are for the bug. The remainder needed to be added
as they were referenced from the first two (except for PKG, which
I was told needed to be added anyway. I also fixed a couple formatting
issues in there for some other variables.
(From yocto-docs rev: c488b57a2ae5a5d1ef4b0da0ecaa9589c3106a45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new step about how to use diffconfig task to create
kernel config fragments.
Scott fixed some grammar in one of the sentences after applying the
patch.
(From yocto-docs rev: 5b7ccdbf708cbeebc2d8dc91db129fb35aabdcdd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added the new variable CONFIG_INITRAMFS_SOURCE, which points to the
initramfs source. I also added information to the
INITRAMFS_IMAGE_BUNDLE variable noting how its use can avoid
circular dependencies as described by the bug.
(From yocto-docs rev: 73267642299d1164eeee5866e7ca7006c56260e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The opening sentence here said that the build history is
kept in the $TMPDIR/buildhistory directory in the Build Directory
as defined by the BUILDHISTORY_DIR variable. Well, the variable
claims it is kept in $TOPDIR/buildhistory. I went with the
variable as the correct source. So, I changed the intro
sentence here.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 242e372affe771776bdfc17f3e3f5187d8965467)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more detail about this directory. I stated that it
is the top-level build directory and it is set when you
initialize your build environment with one of the init scripts.
(From yocto-docs rev: 839d704e7096dba039b17e5989cad7314732e6db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the bit about isolating SDK information. Also removed
the workaround and text regarding the limitation that caused
adding and removing INHERIT += "buildhistory" to re-execute tasks.
Added a few links to some newly documented variables.
(From yocto-docs rev: 7d13bea6d9f0c2bdc9aa58c2933998d6d10ac810)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I modified a few areas to help integrate some newly documented
BUILDHISTORY_* variables. Mostly some rewriting to feature
some variables that help the user select build history features.
(From yocto-docs rev: 8cb6a09ba7f0bd645a12e6f7a93247a9f0e77980)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5855]
Added this new variable to the glossary.
(From yocto-docs rev: 72e31962ecb3289c3f986ecb54a5590b5101067d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5857]
I had missed replacing the release date in the manual revision
history tables for the 1.5.1 release. It was still an estimate.
I have replaced with the actual date of "January 2014"
(From yocto-docs rev: fb9abe0df33a9b551d797ac1b72577931f5f8ce6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5814]
I placed a brief note in the section where it talks about adding
a project to an Eclipse project that states you can't use special
characters in the project name.
(From yocto-docs rev: a03b5849394a6ca3a787b444d95fa49b9db36dd5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
export XDG_RUNTIME_DIR=/tmp/$USER-weston used instead of
export XDG_RUNTIME_DIR=/tmp/$USER=weston
(From yocto-docs rev: 39cd1d39f550f19b391c037639b9ed6493b08cde)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a typo and also added a bit of information to be sure
the user understands this affects the local host.
(From yocto-docs rev: 4111ac06276f2d1b134176683c0f4d446ba35ef9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5801]
First draft of this description.
(From yocto-docs rev: 412d0cc7dbb74ece45940c40fbb617217ab88d2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an incorrect wrapping of code in the source
example.
Reported-by: Ross Burton <ross.burton@intel.com>
(From yocto-docs rev: 478c3bba9e4b1b72dd11b58ebf9eb7ed54e80081)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording. "holds" could be confusing for some.
(From yocto-docs rev: d94a1be421f39637b1d760dad401fdfb54e20b07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5755]
Put a link in the SDK section of the "Closer Look" chapter. The
link goes back to the SDKPATH variable.
(From yocto-docs rev: 7420da33bfa89625b5bbf592416c7f07780f8285)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5762]
Applied some more detail based on Laszlo's review comments.
(From yocto-docs rev: eb8d11504d6c22dfd9620422df3fc31cfcebb00c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5762]
Initial draft of this variable in the glossary.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: fb603925de6760f620f9f2832ad6cb4aad3acaae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5755]
I added this variable to the glossary chapter.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 0ad0e2ca351ebc52c92404d71502455cf7c042c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noted that if these variables are not set, they both default
to the number of cores the build system has.
(From yocto-docs rev: 8654aeb91f734628bffda9d5de0cdc9ea27d3f67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change, x11 was only documented as an IMAGE_FEATURE.
However, it is heavily relied upon as a DISTRO_FEATURE by
pacages that have an optional X dependency determined during
build time. Examples include libsdl, dbus, alsa, and
pulseaudio.
(From yocto-docs rev: dd243b453b6d69bc439dda816fa5c9c83c5c3cd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace core2 with core2_32 where appropriate for the new
x86 tune naming.
(From yocto-docs rev: 665dd19cd041f1f33e2107b57933f9a6eab2ee90)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Scott Rifenbark <scott.m.rifenbark@intel.com>>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable was wrong and it was causing six mailing links in
the manual set to no resolve. Who knows how long they have been
broken. They work now.
(From yocto-docs rev: 8af811fff06fca799bcead538a5dfece9ddbc5ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the description to match that which is used in the
WORKDIR variable.
(From yocto-docs rev: 7d9071c2bb99e7c3f3eeae9ddf0abc34563c6725)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4942]
Added a note to the variable description stating that if the user
does not set TCMODE to "default", it is up to them to verify that
components are compatible with the toolchain.
(From yocto-docs rev: e67d7635c1d749e65aaef0d4cc6576a3ee312ddd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about needing to place the inherit statement last.
(From yocto-docs rev: 204e15035a9a116002b7f645e4edb378979c89f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the machine-dependent and machine-independent descriptions.
Created matching description from the "Writing a New Recipe"
section.
(From yocto-docs rev: 89a00beb81be60668abfdd67b13f5ee5bdc7ea1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording as it is described in the "Writing a New Recipe"
section.
(From yocto-docs rev: 88b039ccd0aa825220de091ea7225ada3d212553)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Final review comments from Paul Eggleton implemented here.
This should be it for the new section.
(From yocto-docs rev: 5307b471c73f46103e0a031172df3174c1880806)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are Paul Eggleton's fourth review change.
(From yocto-docs rev: 8470c1b516f7799148b4e2eae28534730e93b58b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed applying the revision comments from Paul Eggleton
for the third revision of this new section.
(From yocto-docs rev: d641aa6318cb87e9d41dda39cc4747c44888aa4d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented some third review feedback from Paul Eggleton.
(From yocto-docs rev: 3fd9c3cc4cf2aba876f0ad2ab36660ec32ea4c08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes.
(From yocto-docs rev: e545ee26e7e6c827c5ee6d7061f01eda58c9c82b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to these sections, which are part of the
"Writing a New Recipe" section. Moved the Post-installation section
out of the examples area into its own, higher-level section as
it was not really an example. Other edits were direct result of
Paul Eggleton's review.
(From yocto-docs rev: c147a8bedf79d0be42d7b338e10b7e42d7c0b080)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to this section, which
is a part of the "Writing a New Recipe" section. Very minor
fix to remove a sentence that was somewhat isolated and unecessary.
(From yocto-docs rev: fd2a0eac1bc4b9e6af0bc8ce9a30802dbea35873)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some self-edits to this section that is part of the
"Writing a New Recipe" section. There was no feedback from the
second review but I noticed a few issues. Also, I added that
reference on how to add a post-installation script from the
"Enabling System Services" section as noted by Paul Eggleton.
(From yocto-docs rev: 6be835637cb1dc232d6d6dd1dfe1bc803efecfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to the section that is
part of the "Writing a New Recipe" section. I changed the title
of the section and applied some rewordings to better reprepresent
exactly what sysvinit and systemd really are (managers).
(From yocto-docs rev: 95c3ed5b7d1ace08828baacc8401e1ea5d96a06e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to this section that is
part of the new "Writing a New Recipe" section. Minor edits.
(From yocto-docs rev: a5116900ca42377c3dc19433b2f6046828ad2dcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added review comments to the section inside the new "Writing
a New Recipe" section. Minor word fixes. I did add a new
common compilation failure scenario. All input from Paul
Eggleton.
(From yocto-docs rev: 5818a8882ff55fc27c5dc77233854465b8c2245b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review edits from Paul Eggleton for this section that is
part of the "Writing a New Recipe" section. Minor wording issues
only.
(From yocto-docs rev: 8e291826fcb9547c3fc16aa81ccf6867fe2e417d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section per Paul Eggleton.
Minor word changes.
(From yocto-docs rev: 5130559003778e3b613d3d480350d041dfd10fcd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section.
(From yocto-docs rev: f4075f61ca081df6c87abd876207da968450a8f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section. Specifically, I addressed
the organization and got rid of the bullet list. I integrated this
information into the examples used for the various SRC_URI snippits.
Also, part of the feedback including separating out the patching
information into an isolated section. I set up the section and
moved minimal information into it.
(From yocto-docs rev: 0a16977c2125402cdd04e24ad5bce074859eb28a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrective edits to this section based on Paul's feedback. Several
items addressed.
(From yocto-docs rev: a09ebe38e0ad22ad4ab12eab3d5a73166e4c56f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-ordered this such that the storage of the recipe comes first
and that is followed by naming it. Also, formatted into a list
to give a better sense of the suggested order.
(From yocto-docs rev: aead82f034a097cbdfe38b3b1f09a60cc411d6ea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the introductory paragraph to be more general about where
a user might locate an existing recipe as a base.
(From yocto-docs rev: d6147d19785824cde29e82aa32916dcec5ae2276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the note structure for the information about BitBake
parcing curly braces. The note was to prominent. I added a
leading sentence to better integrate the information into the
section.
(From yocto-docs rev: 21dd7ceced2c9867e4fefc2aab81a4ab3da3bc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A customer reported a wrong and mis-leading sentence in the
"Configuring and Running the ADT Installer Script" section.
Jessica Zhang pointed this out. I have removed the sentence
altogether.
Reported-by: Jessica Zhang <jessica.Zhang@intel.com>
(From yocto-docs rev: 682906d0ed869faac149a742b028ba4f2c8c8e97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added perl-Thread-Queue to the essential and graphical
package sets for the Fedora distribution.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 26b1ce3cd1fb20b67107d0d1bc0a66cc3a06706e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some confusion to this section as to just when post-install
scripts were being executed. I looked it over and the section really
is focusing more on the situations when you are creating a read-only
root filesystem. So I went through and did a small amount of
editing to just clean up some loose text.
(From yocto-docs rev: 1b3674a5d123e74748bce5de61722079d4740908)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variable descriptions were identical in the ref-manual.
I found out some reasoning behind that and added a bit of
explanation to the entries.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5c786b5b62fefb959ed7c13bb83e718a9eb22189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LIC_FILES_CHKSUM was out of date due to a merge in poky.
I updated the single instance in the manual set to use the new
hash.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 4cfdf391326f2c5750404a8d7f31999f75bc26fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added a new description for the INITRAMFS_IMAGE variable. Also,
made a formatting fix to the INITRAMFS_IMAGE_BUNDLE variable.
(From yocto-docs rev: 87c5c0b1554233c3ce1c41291d852021ec62e0dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added that the kernel class sets the variable to a null string
by default.
(From yocto-docs rev: d00ea912ad9ad1558546496e72fca229b9b8081b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
First draft of a new variable description for
INITRAMFS_IMAGE_BUNDLE.
(From yocto-docs rev: 4f1ac2840750fa35afa7584d28464fd539883399)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5684]
Added a clause to note that the tarballs saved to the DL_DIR area
include the Git metadata.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 76cbb8a149b9fda6879f9dfc6a17dab992325e94)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #5676]
An example of the shell output after running the build env script
has changed. Updated it.
(From yocto-docs rev: 62dda40a102b959b5c43d6d9fc5986f856ee0071)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You really are not compiling the recipe.
(From yocto-docs rev: 82ca9176375c34f3c5b6694b0f205794684a2f01)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FAQ entry for the information on adding a package to your
image changed regarding the cross-reference. I updated it to
the new anchor tag.
(From yocto-docs rev: 6c6b4cced41354412dc8c8d3c99d69f3a7cc8a95)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented this out based on Paul Eggleton's suggestion that
we should not be presenting this information.
(From yocto-docs rev: fe2ee21e42134f0ffc9347f8c0336169f8f52aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merged the concepts in the old "Adding a Package to your Software"
section into the new "Writing a New Recipe" section. This completes
the feedback from Paul, which was extensive for this new section.
(From yocto-docs rev: 522673e1aa068b8d089dfefb5b234a48062da3fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change merged in the Hello World section as a summarizing
example section to the new "Writing a New Recipe" section.
(From yocto-docs rev: 79c858e1590e5ab4c56b19dc51b03e0e570b6209)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involved a first draft and implementation of Paul's review
comments. Also worked on the "Configuration" section.
(From yocto-docs rev: 0e168dbaf5f4949c4c5f79fe7da406ca91390e22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the recipe creation figure. I had to re-order the flow
and also generalize the supporting services installation part of the
diagram.
Fleshed out the "Fecthing" section with SRC_URI examples and much
more detail.
(From yocto-docs rev: 6a23ab2beb90376c11c426ac8bf5618994585a9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added some stuff to the section on fetching source in the
new "Writing a Recipe" section.
(From yocto-docs rev: a4b340d58888927bf648be34402670f8a7d87d8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This draft has the structure with text from Paul's email. It
needs further work.
(From yocto-docs rev: 08025edc34995f7436786e9ed3abdfa155db47af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c031c014bae6d6e4a239a4bcd1e8b9d5d272f851)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Created a new figure for the flow. This involved putting the figure
into the "Figures" directory of both the dev-manual and the mega-manual
and then updating Makefile to include the figure in the TARBALL
variable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some more information around the use of the ICECC_DISABLED
variable. Information from Martin.
Reported-by: Martin Jansa <martin.jansa@gmail.com>
(From yocto-docs rev: 25990dbe66690991babda602ef40df948b70b038)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer have the external-sourcery.bb recipe. Had to rewrite
this around it.
(From yocto-docs rev: 4b0e3860216092461862d29b3a53a834f8dd43b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory is not a temporary thing.
(From yocto-docs rev: 4a10a64866e9e769a2113f95943d69cb79543d6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used a better word to describe the argument list.
(From yocto-docs rev: e31852ee32b2f5166cc766a2cdfe07616dd259db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold provided me with more detail on this class, which
I added.
(From yocto-docs rev: eee81ed69fc6ba766926f8514e88df4ba4640cec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton provided an expanded explanation.
(From yocto-docs rev: 313899b280d7879ee86c9317021388a3cd080662)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three broken cross-references to the "qmake_base" class existed
in the variables chapter. The actual class "qmake_base" is
listed as part of the "qmake*" class so there is no tag taking
a user to the exact "qmake_base" class. Changed the tag to
"ref-classes-qmake*".
(From yocto-docs rev: c13e441e9bbe3a451a59e5123b772426d36183ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note at the bottom clearly stating TAR files are never
used as a substitute for RPM, DEB, or IPK files when generating
your image or SDK.
(From yocto-docs rev: 8d45ac58926de4fb01156eccd53cfa0f3eca4d9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The text used "packages" rather than "recipes." This is a
tragic result of historical naming mistakes early in the project.
(From yocto-docs rev: 0492b458f249f0c4cec6fa3cdd73ab7ca1f1506e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the formatting of the second instance of the
term "systemd".
(From yocto-docs rev: 46696db9869318d8df026a2761d6d8c70e7b3b55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor re-wordings here.
(From yocto-docs rev: 4f60a44520263e3ef3c885a27fcaba1ef8b63609)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the rootfs_deb, rootfs_ipk, and rootfs_rpm classes
altoghther and opted to briefly describe their purposes in the
rootfs* class section. I also am not linking to the IMAGE_FSTYPES
variable but am rather linking over to the PACKAGE_CLASSES
variable.
(From yocto-docs rev: 5e92a1d4f489d5b48f5dbaac7c75ab1a1014e220)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out you can specify this using the PACKAGE_CLASSES
variable but you better not list it first.
(From yocto-docs rev: 9b160b15b3508e360fd57ac4375867d58cdc9709)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was pathetic and needed updating.
(From yocto-docs rev: 30996e88a8ca26d57f748fc8232bb26e0ff6c433)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered some issues with this description. Should be
referencing the Build Directory for where the local.conf file
is and not the Source Directory. Also, the link to the
package.bbclass section was mis-titled.
(From yocto-docs rev: 38daa12eae5303a70cf210f8669e416b161b38bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sorting out who assumes what.
(From yocto-docs rev: f02312e300ce7749a7a5347538ece26f5cfa76bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the links in the icecc class that linked into ICECC_CC,
ICECC_CXX, and ICECC_VERSION so they don't link anymore but rather
give a very brief explanation of what the variable does.
Removed the above three variables from the variable glossary.
These are not BitBake variables and we should not document them.
(From yocto-docs rev: f4f79d27c0d1417ff683381f18f165cda3a8a02e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor changes to the SYSTEMD_PACKAGES, SYSTEMD_SERVICE, and
SYSTEMD_AUTO_ENABLE variables.
(From yocto-docs rev: 838eb9088ec20a265e785d4203e4e5084fd4a7c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added links to USERADD_PACKAGES, USERADD_PARAM, GROUPADD_PARAM,
and GROUPMEMS_PARAM
(From yocto-docs rev: 4b9d23c205f687a6c43efd9f504a7cc9815dc835)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
icecc - added link to Icecream.
images - added some reference links to the end of the section.
logging - added closing ")" character.
nativesdk - corrected the mis-copied recipe name.
own-mirrors - fixed the class name so it was not "ownmirrors".
package - minor tweak to indicate class. Also spelled Berkeley
correctly.
package_deb, package_ipk, and package_rpm - dumped a note and
mentioned that you need PACKAGE_CLASSES to enable the
class.
package_tar - noted that the recipe inheriting the tar class is what
does the trick here.
pixbufcache - minor edits
populate_sdk - minor edits
prserv - edits to tell how it is enabled.
pythonnative - re-worded it.
rootfs* - reworded.
rootfs_deb, rootfs_ipk, and rootfs_rpm - Brand new.
systemd - reworded.
terminal - rewording
useradd - reworded
(From yocto-docs rev: a668eb6e70f416c0818253b0d3456c4f5f6ec050)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added opening reason for the icecc class. Also cleared up the
sentence describing ICECC_PATH.
Minor fix to image class. Also added some reference
links.
Minor fix to image-mklibs class. Also combined rouge
sentence stating that the class in enabled.
Same fix to rogue sentence in image-prelink class.
Fixed "insserve" into "insserv" throughout.
Added many links to some missing classes in the kernel
class. Subsequent commit to actually add the class
documentation.
(From yocto-docs rev: 150de3e52d6c8c775b1128118e7d6eff51014c4e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
extrausers - Changed the note to try and describe that the
change is still specific to an image recipe but is not
tied to other individual recipes.
fontcache - Minor fix.
gtk-icon-cache - fixed capitalization issue.
gtk-immodules-cache - Minor fix
gzipnative - Minor fix.
(From yocto-docs rev: 8cf810bf7b1c030c831205526303af7dd73cf6be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a link in the deploy class.
Re-wrote the bugzilla class to be clearer.
(From yocto-docs rev: 4bb975a0e12c9d38e941f1cf913c042498f06976)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifications to ccache, chrpath, clutter, cross, cross-canadian,
crosssdk, and debian classes.
Added a new variable to the glossary for LEAD_SONAME.
(From yocto-docs rev: f27b6315f839a731017866106578e664c6c86982)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review edits from Paul Eggleton for the following
classes:
allarch
base
bin_package
bugzilla
buildstats
(From yocto-docs rev: fe6b688106c5444fe6306326751ce636894acfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was there because we did not document all the
classes in meta/classes. Now that we are I am dumping it.
(From yocto-docs rev: 3c704fcf8b9e6684d40f0df2069c4e17989ad129)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also had to update four instances in the variables glossary where
links to the section for the class became misnamed due to
stripping out the excess stuff from the class section heading.
(From yocto-docs rev: d98d3848327950c5c5cfc8559379e56c97157ad2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to also fix a couple links in the "migration" chapter due
to the section heading of the packagegroup.bbclass section
changing.
(From yocto-docs rev: bf71e6ee1812b54ba8afafa9818eb718c3bd2f82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the PRSERV_HOST variable. That variable is
now defined in the ref-manual variable glossary.
(From yocto-docs rev: 7166fe94107cd379081fd81b7351ec081aa2c6ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forgot the part about the class being automatically enabled
when using the Hob.
(From yocto-docs rev: e15b52fc703f2bc4c02e2afe05de1cc4d057b685)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, we were documenting the "package*" class and lumping
the "package_deb", "package_rpm", and "package_ipk" classes in
that entry. Really, we need to break out the "package" class on
its own and create entries for the sub-classes that were being
bundled in there. Additionally, we needed to document the
"package_tar" class.
(From yocto-docs rev: 608edf7eaa264d5e20c6ffb5d2a6173d38b42ebc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noticed that this class file name is "image_types.bbclass" and not
"image-types.bbclass". Fixed it.
(From yocto-docs rev: 594cc933c919b7b84248c670ed7563bd23b8597d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note to the existing IMAGE_FSTYPES variable based on
using "live" as an image type. Need to be sure that appears
before inherit line in the recipe.
(From yocto-docs rev: 1fc45b2bc7c70f00882d495d659830b94eb7d2df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I accidently removed this so had to add it back in.
(From yocto-docs rev: 928bc686735fb8bc80df2a8c070846c33ca6aa3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Told where to set this variable.
(From yocto-docs rev: f95fb5821383721da6a63bb8eb74807e89e6b21d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created glossary entries for the GRUB_GFXSERIAL, LABELS,
APPEND, GRUB_OPTS, and GRUB_TIMEOUT variables.
(From yocto-docs rev: 31bcc25866525ef998bc01e11ab9ddb0601b8ded)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put this name in wrong in the original commit.
(From yocto-docs rev: 654ba14a17886b5743e6732f825a693375d264cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entries for gtk-icon-cache and mime are placeholders only
with this commit.
(From yocto-docs rev: 8652cc5d4fe880768e746a80dde82513c5d83a09)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the way in which IMAGE_FSTYPES is processed, it is not possible to
modify it using _append or _prepend. Therefore add a note to the manual to
warn users in case they stumble on this issue.
(From yocto-docs rev: 164aee65a6796ccc24c2734bb7440a8d6531f180)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
João Henrique Ferreira de Freitas
Chengwei Yang
Jonas Eriksson
Darren Hart
David Nystrom
Trevor Woerner