Applied the full set of first draft revision edits for the
new migration section for 1.7. Comments from Paul Eggleton.
(From yocto-docs rev: 90586addbc719ecaf7c768b267adf0e988e27b74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure needed to be updated to reflect that build-id.txt
is now part of the tree and not build-id.
The publication scheme dictates that figures are kept in
individual manuals and in the mega-manual figures directory.
(From yocto-docs rev: 0711a3e41c42eb058db25ff2ea7f1c0982e06963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is what is written now rather than build-id. I changed
the file name and noted that it also contains the full build
header information as written out by BitBake during the build.
(From yocto-docs rev: 7e55b4b5f9e27f6ac5d8f1eab4923bf1b8a712c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the linux-yocto 3.4 kernel from the list in the
section describing which kernels we support. Also, added
the 3.17 linux-yocto kernel to the list.
(From yocto-docs rev: 41f57a9abe1201ed2fb657f8441c97f86f75200a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been replaced by the KERNEL_MODULE_AUTOLOAD
variable. I updated the description to note that and to provide
a cross-reference to the new variable.
(From yocto-docs rev: 8b2f464f7d100db1c585ccc62d7cab89f7f7b164)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this description to the variables glossary.
(From yocto-docs rev: 3da322f92d5028e96422e0c1f5df78b285f2355e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this new variable to the variable glossary.
(From yocto-docs rev: d2d75631777f6cef3472bde428ed65419c99457e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This description was a bit confusing with the way the general
syntax was described so I re-wrote it a bit. Also, added the
requirement that if you use module_conf for a given <modname>,
then you must also include the <modname> as part of the new
KERNEL_MODULE_PROBECONF variable.
(From yocto-docs rev: 15b7819a0d9946ad6565576a6f28897e2dd724f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The field_end function in libavcodec/h264.c in FFmpeg before 1.1.2
allows remote attackers to have an unspecified impact via crafted H.264
data, related to an SPS and slice mismatch and an out-of-bounds array
access.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-0869
(From OE-Core rev: 464123172c92d92fa08e2125c04653590ad654c7)
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libavcodec/h264.c in FFmpeg before 0.11.4 allows remote attackers to
cause a denial of service (crash) via vectors related to alternating bit
depths in H.264 data.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-4358
(From OE-Core rev: 6a029bee3da097b9ed8c421fcd5ea61cd1a31b34)
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When build fs with mtools-3.9.9, has file /usr/bin/lz in rootfs,
it is the symlink to uz:
root@qemu3:~# /usr/bin/lz
-sh: /usr/bin/lz: No such file or directory
$root@qemu3:~# ls -l /usr/bin/lz
lrwxrwxrwx 1 root root 2 Jul 18 18:07 /usr/bin/lz -> uz
root@qemu3:~# uz
-sh: uz: command not found
But the uz isn't actually exist, so the result is that lz is a
broken symlink.
The root cause is that uz hasn't been installed when install-scripts.
(From OE-Core rev: 7308da9ccd4b8b9b5077aacd0442be28a6c73c61)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If build gnupg 1.4.7 after libusb-compat, it shows warning:
WARNING: QA Issue: gnupg rdepends on libusb-compat, but it isn't a build dependency? [build-deps]
Add package config libusb to fix it.
(From OE-Core rev: e1c77392143e538a2305f63ee3add611ec66e877)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The _rl_tropen function in util.c in GNU readline before 6.3 patch 3
allows local users to create or overwrite arbitrary files via a symlink
attack on a /var/tmp/rltrace.[PID] file.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-2524
(From OE-Core rev: 0e95eef8817f51504dcc50d855dcbef172cfc897)
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GnuPG before 1.4.14, and Libgcrypt before 1.5.3 as used in GnuPG 2.0.x
and possibly other products, allows local users to obtain private RSA
keys via a cache side-channel attack involving the L3 cache, aka
Flush+Reload.
Patch from commit e2202ff2b704623efc6277fb5256e4e15bac5676 in
git://git.gnupg.org/libgcrypt.git
(From OE-Core rev: d1e0f3e71ce9978ff0fc94d71e67b528dad84c5c)
Signed-off-by: Yong Zhang <yong.zhang@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit e9672387 split one long line into a multi-line string, but in
the process white space between words was lost. This results in badly
formatted output when this message is printed.
(From OE-Core rev: b145374c0a498de0160a9b81f50ce0066ab14862)
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some recipes that inhrient cmake, the ${B} may be removed by
cmake_do_configure() while sstate_hardcode_path() running, this
causes build errors:
Exception: OSError: [Errno 2] No such file or directory: \
'/path/to/build'
The function sstate_hardcode_path() called command:
$SSTATE_SCAN_CMD which extended as "find ${SSTATE_BUILDDIR} ..."
So the proper function dirs could be ${SSTATE_BUILDDIR}.
(From OE-Core rev: a949943e622b08485fc7632a0a743bc009079c67)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"file" command in exported SDK doesn't work:
...
$ file sysroots/
file: could not find any valid magic files!
...
In oe-core commit 68d548cbae729eaea8ce1403dc95ff63c4a7375c,
it added wrapper to file-native. Do the same thing for
nativesdk-file.
(From OE-Core rev: 69a3ab38d1c725c2b575065739cae4a3b45015a2)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tell systemd just to kill the sshd process when the ssh connection drops
instead of the entire cgroup for sshd, so that any screen sessions (and
more to the point, processes within them) do not get killed.
(This is what the Fedora sshd service file does, and what we're already
doing in the dropbear service file).
(From OE-Core rev: 3c238dff41fbd3687457989c7b17d22b2cc844be)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DISTRO_FEATURES contains "largefile", force the size of off_t to 8 as
a workaround for having ac_cv_sizeof_off_t=4 on 32-bit systems. In
future we will likely drop the value from the site file, but for now
this is a slightly safer fix.
Fixes [YOCTO #6813].
(From OE-Core rev: a8216030ee6c65531de8fbf3eed878a345a94edc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While syslinux not existed in $bootimg_dir, there was a error:
$ wic create directdisk -e core-image-minimal
...
|Creating image(s)...
|Error: exec_cmd: install -m 444 /home/jiahongxu/yocto/
build-20141010-yocto/tmp/deploy/images/qemux86-64/syslinux/
ldlinux.sys /var/tmp/wic/build/hdd/boot/ldlinux.sys
returned '1' instead of 0
...
Add checking for the existance of syslinux to fix this issue.
If syslinux didn't exist in anywhere, prompt user to build it.
[YOCTO #6826]
(From OE-Core rev: c2d4364d9fbbda64598f0a3eb0b0890932bb7742)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes gcc bug 6144, which in my case exhibited itself as a kernel
module that failed to load. This was because static platform_data
structures were being corrupted with the optimiser being set to any
value other than -O0.
Originally-submitted-by: Peter Urbanec <openembedded-devel@urbanec.net>
(From OE-Core rev: 365221f7285c0e392f573deaab3b1e00b12bc293)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trying to upgrade busybox removing symlinks but update-alternatives
need these links (sed, cut, tail, etc) in order to work.
Adding test to avoid this scripts on upgrade fix the problem, same
solution are found in package_rpm class.
[YOCTO #6768]
(From OE-Core rev: 7b9161dd0c475cca6ea7eb507f7c3c51869eb493)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without these changes mesa_git.bb can't be enabled as the
PREFERRED_VERSION due to build breakage.
(From OE-Core rev: 04f48ad3fab4e21a23c46b90f6a62269a1cf1ee7)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
shlib2 code puts the information about path where a provider
will be found. e.g.
{'/usr/lib/llvm3.3': ('libllvm3.3-llvm-3.3', '3.3')}
This is obtained from new shlib2 pkgdata from
llvm3.3/3.3-r0/pkgdata/shlibs2/libllvm3.3-llvm-3.3.list
However when we search for NEEDED libraries we ignore the
key above which is the path where the provider library is installed
and instead just seach in libdir and base_libdir and hence
libraries which are not in above standard search paths gets
ignored even if they appear in DT_NEEDED sections
and a note is emitted
NOTE: Couldn't find shared library provider for libLLVM-3.3.so, used by
files: ....
IMO this note should actually become an error since if we do
not have all DT_NEEDED libraries in image the system is dysfunctional.
This patch extracts this libpath from key and add it to seach paths
when looing for a provider of a shared library
[YOCTO #6798]
Change-Id: Ie5f08632e37ba8d3439c8aaae33bc68b8996792f
(From OE-Core rev: bf8472274ac1e9a35f8cbc82357da6c95b396759)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed ncurses.do_configure:
configure: WARNING: did not find library /path/to/tmp/sysroots/qemuarm/usr/lib/pkgconfig
And then anyone requires ncurses.pc will fail.
The configure.in checks:
[snip]
if test -n "$PKG_CONFIG_LIBDIR" && test -d "$PKG_CONFIG_LIBDIR" ; then
[snip]
Create PKG_CONFIG_LIBDIR in do_configure will fix the problem.
We can reproduce the problem by:
Set SSTATE_DIR=/path/to/sstate-cache
1) In build1, make sure everything is ready in SSTATE_DIR
$ bitbake ncurses
2) In build2, rebuild ncurses only:
$ bitbake ncurses -ccleansstate && bitbake ncurses
Then we will see the warning in log.do_configure.
(From OE-Core rev: ea4010c8398745736b0c22ed037604db8fc43212)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.17 has problems with:
a) CONFIG_USB_WACOM -> CONFIG_HID_WACOM
b) The wacom driver no longer working with qemu
c) The USB stack being missing on arm and ppc
and these are just the issues we know about. Switch back to 3.14
until 3.17 is fixed.
This reverts commit 6a56492f3a.
(From meta-yocto rev: 60ff51c7a53865ac6d6f04119264982fc6a7fa4e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the ref-qa-checks.xml chapter so that each QA warning
or error message would generate a permalink that is suitable
for searching from the poky codebase. To implement this, I
had to embed an id marker in the <para> tag that precedes each
<code></code> tag pair. The 'xxx' string of the id is the leaf
portion of the permalink.
This creates the following tag construct:
<para id='xxx'>
<code>
some-warning-or-error-message
</code>
</para>
The permalink is generated with the help of the new
qa-code-permalinks.xsl file, which triggers on the
<para><code></code></para> construct. This new file resides
in documentation/template.
Right now, this construct
is unique to the ref-manual's chapter on the QA error and warnings
chapter only. However, if for some reason that construct is
used in any other part of the ref-manual, a generically numbered
permalink would also be generated.
The ref-manual-customization.xsl file was also altered to include
the new documentation/template/qa-code-permalinks.xsl file.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: aec27a9f8337575d31bfe0066563da99259046e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The s_sin.c patch undoes some code changes in glibc itself, these changes have nothing to
do with the option groups and I suspect crept in as part of the initial conversion. Undoing
this patch also fixes a test failure in test-double and test-idouble.
[YOCTO #6808]
(From OE-Core rev: 5f225067dcb7244065f857d34e1041171844b243)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a similar way to the previous script which adds support for native
environment scripts, this adds support for target environment scripts
too.
(From OE-Core rev: 2d9466734f0c0c90724820bc36992b2800ffa4d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake meta-toolchain
ls tmp/deploy/sdk/poky-glibc-x86_64-meta-toolchain-i586-toolchain-1.7.manifest -al
...
|-rw-rw-r-- 1 root root 0 Oct 10 15:05 tmp/deploy/sdk/poky-glibc-x86_64-
meta-toolchain-i586-toolchain-1.7.manifest
...
The manifest is empty, the reason is target's ipk config path is
d.getVar('IPKGCONF_TARGET') rather than d.getVar('IPKGCONF_Target')
(From OE-Core rev: 81b3cc448f040dcb4c2f2b05983231ac53270663)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when rebuild:
make: *** No rule to make target `/path/to/old//sysroots/qemux86-64/usr/lib/dbus-1.0/include/dbus/dbus-arch-deps.h', needed by `dbus/dbus_old.o'. Stop.
The .d files save the path of the dependencies files which may not exist
when rebuild, we can remove them to make the rebuild work.
(From OE-Core rev: e336102e59dbbd01fe67121738203563476f9456)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when MACHINE = qemux86-64 and libdir = /usr/lib64:
mv: cannot stat `/path/to/image/usr/lib64/perl-native/perl': No such file or directory
The perl-native files are always installed to /usr/lib on both 32/64
bits targets.
(From OE-Core rev: fad6d25e548cb82c2106eb30ccdc0b8f3408de0a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
MACHINE = "qemux86-64"
VIRTUAL-RUNTIME_init_manager = " systemd "
DISTRO_FEATURES_append = " systemd"
DISTRO_FEATURES_BACKFILL_CONSIDERED += " sysvinit "
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
$ bitbake avahi avahi-ui
ERROR: QA Issue: avahi-ui: Files/directories were installed but not shipped
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/avahi-daemon.socket
/lib/systemd/system/avahi-dnsconfd.service
/lib/systemd/system/avahi-daemon.service [installed-vs-shipped]
ERROR: The recipe avahi-ui is trying to install files into a sharedarea when those files already exist. Those files and their manifestlocation are:
/path/to/sysroots/qemux86-64/lib/systemd/system/avahi-daemon.socket
Matched in manifest-qemux86-64-avahi.populate_sysroot
/path/to/sysroots/qemux86-64/lib/systemd/system/avahi-dnsconfd.service
Matched in manifest-qemux86-64-avahi.populate_sysroot
/path/to/sysroots/qemux86-64/lib/systemd/system/avahi-daemon.service
Matched in manifest-qemux86-64-avahi.populate_sysroot
Please verify which recipe should provide theabove files.
And remove the duplicated line:
rm ${D}${base_libdir} -rf
(From OE-Core rev: 1e6ec39d4996d2812b01c4452c579e476e70e85d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed error when systemd is in DISTRO_FEATURES:
ERROR: The recipe systemd is trying to install files into a sharedarea when those files already exist. Those files and their manifestlocation are:
/path/to/sysroots/qemux86/usr/lib/libnss_myhostname.so.2
Matched in manifest-qemux86-nss-myhostname.populate_sysroot
Please verify which recipe should provide theabove files.
(From OE-Core rev: da70a62d456f7efac379381c2c431cc4ded877e9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of setting 'Restart=always' in the service file, we should
make the service socket activated, just like what Fedora does.
(From OE-Core rev: 176e91ef28800adb6295b29c455b2efb91a01876)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The too long line would cause "git send-email" report errors:
patch contains a line longer than 998 characters
Though we can use "--no-validate" to force the send.
(From OE-Core rev: e96723879eb3352a5bdea7b3e1a576edf9550e5a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code:
bb.fatal("foo1")
bb.fatal("foo2")
Would make the second one not work, use bb.error for first one to fix
the problem.
(From OE-Core rev: 33a87187a8520e190bcade76cc965aa58faaa85a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '-l' option which is valid for GNU make (--> limit by load) has a
different meaning in bjam (--> limit maximum execution time) and will
break very likely the build.
Keep only the the '-l' option when passing PARALLEL_MAKE options to
bjam.
(From OE-Core rev: 1ff36aaec25a7ee89514366fe484345e8d1d7b64)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd expects fsck programs to be located in /sbin and fails for
dosfstools with
| Checking was requested for ..., but /sbin/fsck.vfat cannot be used: No such file or directory
Other fsck programs (e.g. ext4) are located in /sbin already so move
vfat programs into this directory too.
(From OE-Core rev: fa579cb243b8441d95e6c129e07d9e141f808539)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libffi is generally present as it's also a build dependency on glib-2.0, but
explicitly declare it for determinism.
(From OE-Core rev: 85232b154dbaf3fc2ed3fa9291e3cbeaa7f318ab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Yue Tao
Wenlin Kang
Kai Kang
Ross Burton
Peter Urbanec
Wenzong Fan
Hongxu Jia
Paul Eggleton
Richard Purdie
Alejandro Hernandez
Saul Wold
Andreas Oberritter
Randy Witt
Khem Raj
Robert Yang
Chen Qi
Tudor Florea
Enrico Scholz