systemctl is needed if both systemd and sysvinit are in distro
features.
(From OE-Core rev: 39fb37a5143981ae16e722f4ebbbe1b29cbed5a4)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu is used to run udevadm in postinstall.
(From OE-Core rev: f186b0c59e707b9a3bff8fcf3b51dbcef5573298)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu is used to run udevadm in postinstall.
(From OE-Core rev: df239dd45f04198138a32443db0d3bcf4cf8b7b6)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall needs systemd-systemctl-native, mark the dependency
(From OE-Core rev: 279fec228282749f4ff6c95f79295c1e8b3db76d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall needs systemd-systemctl-native, mark the dependency
(From OE-Core rev: 14388db7f0b605536129c925aa667998777b4077)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall needs systemd-systemctl-native, mark the dependency
(From OE-Core rev: 853f05b4d81c9af0fe1050cd15f13b8d3f9a93a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If TMPDIR is configured to be somewhere outside of TOPDIR (a not
uncommon configuration where you have multiple disks and space on /home
is at a premium) then our attempt to find out the location of paths
under TMPDIR by using a relative path led to horribly broken paths
ending up in the eSDK. To save pain, just force a known value for TMPDIR
(i.e. ${TOPDIR}/tmp) and then we can assume that everywhere else.
Fixes [YOCTO #10797].
(From OE-Core rev: 4fe60d526a94f30b201c434994e80fef0f7392f0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
5.3 -> 5.4
Refreshed the following patch:
a) netbase-add-rpcbind-as-an-alias-to-sunrpc.patch
(From OE-Core rev: 3a63b7530377cb225c05a68fb8130d2ec3c3981c)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various changes needed to enable to run Toaster in the
Build Appliance:
1. Pre-install packages as specified by the file
"bitbake/toaster-requirements.txt"
2. Include pip3 in the image
3. Include tzdata in the image (needed by django)
4. Bump SRCREV to a commit with proper settings.py (ALLOWED_HOSTS)
for Django 1.8.16
5. Added README_VirtualBox_Toaster.txt to provide steps for
configuring VirtualBox network adapters (NAT or Bridged)
and steps to launch Toaster
[YOCTO#10767]
(From OE-Core rev: dffbac64bbf86c91247ba7373b3b5bd6af24103f)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
valgrind doesn't seem to support x32 at this time, even in current upstream.
(From OE-Core rev: 0203ae47dacc1a4b37007062f962fa8d4bd602e2)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream have removed the file from zlib.net as a new version has
been released, switch to fetching from the official sourceforge
mirror.
[YOCTO #10879]
(From OE-Core rev: bb99e4a620efd59556539c156cd98ea23aae74c8)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the file is expected to exist, then we should always be using require
so that if it doesn't we get an error rather than some other more
obscure failure later on.
(From OE-Core rev: 603ae6eb487489e65da69c68e532cb767ccc1fc2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After systemd-boot was introduced, its been tested for a while with no major
issues being found until now, this patch completely replaces all gummiboot
instances with systemd-boot ones, taking the next step into cleaning
up systemd-boot/gummiboot.
[YOCTO #10332]
(From OE-Core rev: f9a61d3400ad9068a6d83b8eb6aefe3098c58e68)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a few straggling expansion parameter removals left for
getVar/getVarFlag where the odd whitespace meant they were missed
on previous passes. There were also some plain broken ussages such
as:
d.getVar('ALTERNATIVE_TARGET', old_name, True)
path = d.getVar('PATH', d, True)
d.getVar('IMAGE_ROOTFS', 'True')
which I've corrected (they happend to work by luck).
(From OE-Core rev: 688f7a64917a5ce5cbe12f8e5da4d47e265d240f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This rdepends on libgl.
(From OE-Core rev: a7cab6a9d416b5a53de206c9c2cf020c1fc70201)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refreshed the following patch:
* inet-6-.defn-fix-inverted-checks-for-loopback.patch
(From OE-Core rev: 1daa09aa82c528dcc7682553dd6704a93aafdc88)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to be able to use -fstack-protector then you need the
runtime support - you can either write this yourself or use libssp
supplied with GCC. If you're using GCC then it seems likely that you'd
just be using libssp, so include in the SDK by default; however use
RRECOMMENDS just in case it's been disabled or you aren't using GCC.
(From OE-Core rev: 6c990655e35bb3a14d59555662ec5802c9980028)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rm: can't remove '/etc/resolv.conf': Read-only file system
ln: /etc/resolv.conf: File exists
/etc/default/volatiles contains an entry:
l root root 0644 /etc/resolv.conf /var/run/resolv.conf
which causes populate-volatile.sh to execute the following in link_file():
if [ -L \"$2\" ]; then
[ \"\$(readlink -f \"$2\")\" != \"\$(readlink -f \"$1\")\" ] && { rm -f \"$2\"; ln -sf \"$1\" \"$2\"; };
elif [ -d \"$2\" ]; then
...
At the time the image is created, /etc/resolv.conf is already a
symlink to /var/run/resolv.conf, but at boot time when
populate-volatiles.sh is run, /var/run/resolv.conf doesn't
exist, causing it to try to rm -f and ln -sf which of course
fails due to the read-only filesystem.
[YOCTO #10814]
(From OE-Core rev: 765ee275f5499254b1f09e394c757072bea5f459)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If commands are run asynchronously they may be completed out of
order causing problems if later entries depend on earlier ones.
(From OE-Core rev: bead9e59768209dd70f9cba51d2f1e5925cc284d)
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
latest systemd has changed the resolved defaults which points to
127.0.0.53 port 53 on local network. If someone wants to use
host-local IP address then it can be pointed to copy in /lib/systemd
(From OE-Core rev: 99d1199fd0961f94732a1a533d66472ca17cf6f5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no break in busybox's "defconfig" file to show where Runit
settings suddenly morph into SELinux settings, so add some comments.
(From OE-Core rev: 0fa590ed6c26aa065a9da8edbf65436fa1f6d04f)
(From OE-Core rev: 21c3d1b354dbb6cd6f3d574785f70858d828d977)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building systemd with multilib support enabled in your build you
will get the following QA warnings (if the 'libdir' QA check is
enabled.)
WARNING: systemd-1_232-r0 do_package_qa: QA Issue: systemd-dbg: found \
library in wrong location: /lib/systemd/.debug/libsystemd-shared-232.so
systemd: found library in wrong location: /lib/systemd/libsystemd-shared.so
systemd: found library in wrong location: /lib/systemd/libsystemd-shared-232.so [libdir]
Since systemd 231 upstream has included an 'internal' library which
they explicitly place in the application specific /lib/systemd
directory. You can see some of the discussion about this placement
here https://github.com/systemd/systemd/issues/3810
This placement is being picked up by the QA checker since when
multilibs are enabled it expects all libraries to be in lib32 or
lib64. Since the systemd and systemd-dbg packages don't contain any
other libraries we can respect the upstream placement and skip this QA
check for these packages. Unfortunately the QA mechanism doesn't allow
us to specify individual files so this approach is the best we can do.
(From OE-Core rev: 422077ff91c4147f08108fe8510b238730f2367c)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The NULL pointer dereferencing could produced some
security problems.
This is a preventive security fix.
(From OE-Core rev: 8f3008114d5000a0865f50833db7c3a3f9808601)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Namespace nodes must be copied to avoid use-after-free errors.
But they don't necessarily have a physical representation in a
document, so simply disallow them in XPointer ranges.
(From OE-Core rev: 00e928bd1c2aed9caeaf9e411743805d2139a023)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xpath:
- Check for errors after evaluating first operand.
- Add sanity check for empty stack.
- Include comparation in changes from xmlXPathCmpNodesExt to xmlXPathCmpNodes
(From OE-Core rev: 96ef568f75dded56a2123b63dcc8b443f796afe0)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getty devices were not being removed in some cases because device name
was not at the end of the line, for example a ttyS1 device:
S1:12345:respawn:/bin/start_getty 115200 ttyS1 vt102
Removing this limitation allows sed to remove any line containing
the device.
(From OE-Core rev: 2e0b36981c1f91ed0d3d457c370df10a099407af)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are required for compatibility with ConnMan, which by default
uses table ids greater than 255.
(From OE-Core rev: e9114bdd8a83b88f59526780910c49e3092fdd57)
Signed-off-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ARM stack frames for abort and raise were limited to the the actual
abort and raise call, such as:
Obtained 4 stack frames.
./test-app(print_trace+0x1c) [0x10a08]
./test-app() [0x10b3c]
/lib/libc.so.6(__default_sa_restorer+0) [0x4adae1e0]
/lib/libc.so.6(gsignal+0xa0) [0x4adacf74]
This is not terribly useful when trying to figure out what function
may have called called the abort, especially when using pthreads.
After the change the trace would now look like:
Obtained 8 stack frames.
./test-app(print_trace+0x1c) [0x10a08]
./test-app() [0x10b3c]
/lib/libc.so.6(__default_sa_restorer+0) [0x4befe1e0]
/lib/libc.so.6(gsignal+0xa0) [0x4befcf74]
/lib/libc.so.6(abort+0x134) [0x4befe358]
./test-app(dummy_function+0x50) [0x10adc]
./test-app(main+0xd4) [0x10c24]
/lib/libc.so.6(__libc_start_main+0x114) [0x4bee7a58]
(From OE-Core rev: 93bf8713d8e13c278543baea94fb8dad0cb80e49)
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a critical regression in the default behavior with systemd
232 which prevents lxc, docker, and opencontainers from working
properly out of the box. The change was already committed to the
systemd 233 code stream.
The failure looks like what is shown below.
% lxc-start -n container -F
lxc-start: cgfsng.c: parse_hierarchies: 825 Failed to find current cgroup for controller 'name=systemd'
lxc-start: cgfsng.c: all_controllers_found: 431 no systemd controller mountpoint found
lxc-start: start.c: lxc_spawn: 1082 failed initializing cgroup support
lxc-start: start.c: __lxc_start: 1332 failed to spawn 'container'
lxc-start: lxc_start.c: main: 344 The container failed to start.
lxc-start: lxc_start.c: main: 348 Additional information can be obtained by setting the --logfile and --logpriority options.
Commit 843d5baf6aad6c53fc00ea8d95d83209a4f92de1 from the systemd git
has been backported and can be dropped in a future uprev.
(From OE-Core rev: d212e97aeae502cd0d11cb922f7711aee5c1ace0)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This improves the config file parsing to permit blank lines and
comments following an entry or preceeded by whitespace.
(From OE-Core rev: 415eaacb83b1c6df5210fb423e3e96e530b1dc42)
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop support for rcS.d SysV init scripts.
These are prone to cause dependency loops, and almost all packages with
rcS scripts now ship a native systemd service.
* Drop mount propagation patch, it only happens with libseccomp, OE doesnt
enable it
* kdbus option has disappeared from configure
* Ignore dev-so for PN now since systemd introduced private .so see
https://github.com/systemd/systemd/issues/3810
* Add libnss* to PACKAGES_DYNAMIC for libnss-resolve to work correctly
* Forward port systemd-boot patches to systemd-232
(From OE-Core rev: e6c1765a05c1321f08f3d1fb521dfe6b07bc8e92)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CVE-2016-5131 libxml2: Use-after-free vulnerability in libxml2 through
2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote
attackers to cause a denial of service or possibly have unspecified
other impact via vectors related to the XPointer range-to function.
External References:
https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-5131
Patch from:
https://git.gnome.org/browse/libxml2/commit/?id=9ab01a277d71f54d3143c2cf333c5c2e9aaedd9e
(From OE-Core rev: 640bd2b98ff33e49b42f1087650ebe20d92259a4)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fractional durations (e.g. 0.5s) for the sleep command are useful and
not terribly uncommon in practice, especially in scripts associated
with test cases (e.g. mdadm, lttng-tools). Enable FEATURE_FLOAT_SLEEP
by default in order to avoid having to patch every instance of a
script using a fractional sleep.
The busybox binary gains a few hundred bytes in text (armv5e shown):
$ size -x busybox.nosuid.{before,after}
text data bss dec hex filename
0x89382 0x71d 0x2250 572655 8bcef busybox.nosuid.before
0x8954e 0x721 0x2250 573119 8bebf busybox.nosuid.after
(From OE-Core rev: 0f53db8a63ed35031b1fcc85057b39ad43c9abd1)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bobby Bingham (2):
treat null vdso base same as missing
add s390x port
Rich Felker (2):
generalize ELF hash table types not to assume 32-bit entries
work around gdb issues recognizing sigreturn trampoline on x86_64
(From OE-Core rev: 39829ef1b8bba3499255c59a4b9713e68a33ddc1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently systemd depends on systemd-container due to a dangling
symlink deployed with systemd.
Move the symlink to systemd-container.
| DEBUG: systemd contains dangling link /lib/systemd/system/systemd-machined.service
| DEBUG: target found in systemd-container
(From OE-Core rev: e12912ac7484654c201d167831b302a821e14972)
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch has been superseded by 2907b1 in gobject-introspection, which we're
now shipping.
(From OE-Core rev: f5c11a40008801aef5ab8df10ee837ad23c24b8d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes more sense than the default TERM=linux (as set
by the linux kernel).
In addition, when using busybox init, it tries to achieve
the same (in a different way).
Both agetty, and busybox getty support the terminal type as
the last argument.
(From OE-Core rev: a23004f32dda9310c7efc29720fa9c3027a7c329)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport patch to fix CVE-2016-6323 of glibc. And remove the section of
file ChangeLog which can't be applied.
Ref:
https://sourceware.org/bugzilla/show_bug.cgi?id=20435
(From OE-Core rev: a3c2acee40c8875e311e03bff6906e7c93c491fc)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glib-networking 2.50 moved away from intltool to modern gettext, so remove the build dependency.
(From OE-Core rev: 709004afe9f55126400f4ca70454b3e69a19fa6a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add awareness of /dev/nvme* block devices to install scripts. As presently
written, installer knows only of /dev/sd* and /dev/mmcblk* block devices.
Building upon scaffolding put in place by Awais in...
80ec9f627915 ("initrdscripts: handle mmc device as installer medium")
(From OE-Core rev: b5a036ce958e3fe24690531712071abc14b48033)
Signed-off-by: Joe Konno <joe.konno@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES
variable is defined
(From OE-Core rev: ca5fef0fe8fad2010049790ebf34bc9e9ede39f0)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES
variable is defined
(From OE-Core rev: 5013504b8b406b47a66c84413cb7f8beb5c336c3)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES
variable is defined
(From OE-Core rev: ed1ba311fbfc6365da91b867d22b77c7c44cae75)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The su binary is handled by alternatives but the man page wasn't, so
installing both util-linux-doc and shadow-doc produces errors.
Also use d.expand() to neaten the code.
(From OE-Core rev: 70a161ee88d3d54fec6d59039c181b43f1857dc3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eMMC devices may report block devices like "mmcblk0rpmb" and
"mmcblk0boot0". These are not actually block devices and any
read/write operation on them will fail. To prevent spamming error
messages attempting to mount them, just ignore these devices.
(From OE-Core rev: 9f4a85eb929f67420d9689d7dddadd120ed49843)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manager_invoke_notify_message function in systemd 231 and earlier allows
local users to cause a denial of service (assertion failure and PID 1 hang)
via a zero-length message received over a notify socket.
The patch is a backport from the latest git repo.
Please see the link below for more information.
https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-7795
(From OE-Core rev: 543570cafa8d7f595b489d03d05f0aa4478f8539)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When modifying the PATH variable in .bashrc, double quote characters
were used, resulting in expanding the variable $PATH with the value of
PATH of the system building the Build Appliance.
The original intent was to enter an un-expanded (literal) $PATH.
In order to that, one must use single quotes instead of double quotes.
[YOCTO#10434] [YOCTO#10504]
(From OE-Core rev: 6238faf901956e2a350315a66ca1ce557deaa513)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Six-monthly feature release.
glib-2.0-utils now includes "gio" command line utility.
Drop a patch that's now upstream. Add PACKAGECONFIG for libmount,
enabled by default.
(From OE-Core rev: 361dc9990fb5fc5604ba8e9d2f1188fd440e916d)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENSE and LIC_FILES_CHKSUM apply to the sources specified by SRC_URI,
not to the recipe itself. As such a license declaration for a source-less
recipe makes little sense. The LICENSE declaration is mandatory, but
LIC_FILES_CHKSUM can be removed in such cases.
Remove the LIC_FILES_CHKSUM declarations from all recipes that do not
need it.
CC: Paul Eggleton <paul.eggleton@linux.intel.com>
(From OE-Core rev: b18fa5f2f2f46afc6fdc58f4d29679dea9c36c43)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I couldn't find any reference whatsoever to it in the source tree.
(From OE-Core rev: 503759744b9fad894e26323b7586f92c59b224ae)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several recipes reference the LICENSE file in their LIC_FILES_CHKSUM
variable as ${COREBASE}/LICENSE. This forces distribution providers to
keep this file verbatim or to overload the affected recipes. The section
"Moving to the Yocto Project 1.6 Release" in the Yocto manual suggests
removing the LICENSE file where possible.
Remove LICENSE in cases where COPYING.MIT is also given and replace
LICENSE with COPYING.MIT if the former was the only entry. All modified
recipes specify LICENSE = "MIT" and none of the in-tree files specify a
different license either.
As the packages do not change (the license files are not contained in
them), do not increase PR.
(From OE-Core rev: 0059e0661826c857a07c862bcb46162671e0e330)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu script fails with an error when executed in Build Appliance.
Typical use case:
$ bitbake core-image-minimal
$ runqemu qemux86
Observed error:
runqemu - ERROR - In order for this script to dynamically infer paths
...snip...
runqemu-ifup, runqemu-ifdown or ip not found
The error is caused by the fact that "ip" is located in /sbin, however /sbin is
not in user's ("builder") PATH. To fix this we add /sbin to PATH.
The simplest place to do this is in user's .bashrc.
[YOCTO#10434]
(From OE-Core rev: 7561514454c20a86e9e126af80dcf114ccd23535)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The XML W3C conformance test suite contains thousands of xml files all
marked executable. We dutifully try to strip all these files of debug
info in do_package.
"chmod -x" improves build time by ~40 seconds.
(From OE-Core rev: eb9cdf6b9277d23d1696233fccc4689e6030644c)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous attempts to constrain execution of `resize` to only TTYs did
not properly handle situations when `tty` would return the string "not a
tty". The symptom is "/etc/profile: line 34: test: too many arguments".
Fix this by utilizing the exit code of `tty`. Also use `case` instead of
`cut` to eliminate a subshell.
(From OE-Core rev: e67637e4472ff3a1e2801b84ee3d69d4e14b9efc)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init script will return '1' if we try to stop the service and it is
not currently running. The prerm scriptlet must not fail because of this
because it will cause package deinstallation of upgrade fail if opkg
package manager is used.
[YOCTO #10299]
(From OE-Core rev: 806a910927f479207d47b06c20a0497e91203266)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Yocto Project Eclipse plugin requires that runqemu and unfsd are
accessible within the SDK, and indeed the standard SDK has these. This
turns out to be fairly easy to do - we just need to add unfsd and symlink
it, runqemu and a few other scripts into the SDK's bin directory.
Fixes [YOCTO #10214].
(From OE-Core rev: 9007e0e3fce7e09b043fead54b17f69c1661d162)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for MIPS Release 6 ISA
The loader is located at a new place for multiarch.
For more details, check https://wiki.debian.org/Multiarch
and https://sourceware.org/glibc/wiki/ABIList#mips
(From OE-Core rev: 502145553e2368525a4b327c64d2971dac58d85b)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no /etc/localtime (or /etc/TZ for uclibc) is found, then the libc
will default to UTC, so setting UTC as a fallback default via the TZ
environment variable is redundant.
Since having the TZ environment variable set causes /etc/localtime
to be ignored, it can cause confusion if /etc/localtime is added
interactively after /etc/profile has been run.
(From OE-Core rev: 98b6420952cbf73ddd1318f36c68d575c330eb71)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create kbd-ptest sub-package:
* add file run-ptest and runtime dependency make
* modify installed Makefile to disable remake Makefile and the test
cases when run the ptest
* add patch to set proper path for test cases to get resource files
(From OE-Core rev: 901ccb3e70e9036112c51acc6d18d05025f6e1bb)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
[YOCTO #9281]
(From OE-Core rev: d2eccccb70e809d482c493922f23aef4409cfd82)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Expand TOOLCHAIN_CONFIGSITE_NOCACHE value immediately before inheriting
cross-canadian to avoid HOST_ARCH being changed from TARGET_ARCH to SDK_ARCH,
thus ensuring its correct value.
[YOCTO #10255]
(From OE-Core rev: 1e13d1fd22186af5544e7248dc12635cd2f2e08b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code did "mv ${D}${base_libdir}/udev ${D}${nonarch_base_libdir}"
which is not needed any more, eudev can work with ${base_libdir}/udev.
(From OE-Core rev: 5e26b3df04716010b31b4c7ac0ac6b28982784f3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It provides udev, but doesn't install udev.pc, which causes other
recipes failed to figure out udevdir.
Fixed when systemd in DISTRO_FEATURES:
$ bitbake pcmciautils (or btrfs-tools):
Package udev was not found in the pkg-config search path.
Perhaps you should add the directory containing `udev.pc'
to the PKG_CONFIG_PATH environment variable
No package 'udev' found
Their udev rules file may not be installed according to each pkg's
implementation.
(From OE-Core rev: a32dac24808bf8621fdbbecb654eff784acee47e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We still have problems where deploying SDKMACHINE=i686 can cause removal
of SDKMACHINE=x86_64 artefacts.
The reason is that x86_64 is a BUILD_ARCH as well as an SDK_ARCH and
the manifest namespaces overlap. To fix this, set PACKAGE_ARCH and
the stamp-extra-into to include SDK_OS. SDK_OS may not be entirely correct
but it is what sstate.bbclass uses for nativesdk and fixing that is
a separate issue.
This is confirmed to resolve artefact problems on the AB which have been
delaying a new uninative release.
(From OE-Core rev: 1dbc6ec4ca061570d2482c9abebcf720298db9b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildtools-tarball shouldn't be regenerated when MACHINE changes,
nor should variants for other SDKMACHINE be removed from the deploy
directory when SDKMACHINE changes.
Remove target architecture dependencies so that deploy artefacts
can overlap.
(From OE-Core rev: b7d1a310f6b880e92b124a78af3c948abaab4236)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The uninative tarball only contains nativesdk compoents. It should
not get regenerated when MACHINE changes for example. Currently its
sstate arch is also incorrect so changing SDKMACHINE results in other
variants being removed from the deploy directory.
This patch removes the target architecture dependencies so that
deploy artefacts can overlap and it doesn't continually rebuild. This
also fixes various autobuilder/release artefact issues we're having
as a result of these issues.
(From OE-Core rev: 6edd0b8dccc6e1e21f2ef87013e2e0a40d19b0d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the stamps for x86-64 and i686 uninative tarballs match
and we can't deploy both to the DEPLOYDIR.
(From OE-Core rev: fee426ae0c2b27925b05b856ada676958ee10869)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the stamps for x86-64 and i686 uninative tarballs match
and we can't deploy both to the DEPLOYDIR.
(From OE-Core rev: 2a9603759fe87d6326c145f6213ffffeb6afc6ae)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dropbear will use system versions of libtommath and libtomcrypt if
available. To make builds deterministic, add a PACKAGECONFIG option
to choose system libs or force use of the bundled versions.
Note that currently there are no libtommath or libtomcrypt recipes
in oe-core, so default to using the bundled versions.
(From OE-Core rev: b7c2edd2d6ded287d8b34dd047ae84d3fd69d4c6)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To prevent build failures when using system libtom libraries and
linking with --as-needed, LIBTOM_LIBS should be in the order
-ltomcrypt -ltommath, not the other way around, ie libs should be
prepended to LIBTOM_LIBS as they are found, not appended.
Note that LIBTOM_LIBS is not used when linking with the bundled
libtom libs.
(From OE-Core rev: 62e96283fe77469e24e8df86c6c037c92009b00a)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the recipe now using variable IMGDEPLOYDIR instead of DEPLOY_DIR_IMAGE,
the final Build Appliance image ended up being created in a wrong location.
This patch assures the final ZIP image is created in identical location as before:
tmp/deploy/images/<machine>/Yocto_Build_Apliance.zip
[YOCTO#10274]
(From OE-Core rev: 5ac0604fdc7d5b783011c43d476210b427b5dae0)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable building of mkfs.bfs, which is used to create
BFS file-systems used by SCO UnixWare. This is highly
unlikely to be utilized and there are otherwise no
references to 'bfs' throughout the rest of the tree.
(From OE-Core rev: 3226d89ff743c223181fda90f605c7579337941a)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable building of {mkfs,fsck}.minix, which are used
to support minix file-systems. Minix predates Linux and
support for its file-systems is unlikely to be needed.
No recipes otherwise reference minix, except in patches
to autotools configuration scripts, so there should be no
impact to other recipes.
(From OE-Core rev: fc66762d7c112fb798c2444dd902ce03baf975c4)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building busybox, an occasional error was observed.
The error is consistently the same:
libbb/appletlib.c:164:13: error: 'NUM_APPLETS' undeclared (first use in this function)
while (i < NUM_APPLETS) {
The reason is the include file where NUM_APPLETS is defined is not yet generated (or is being modified)
at the time libbb/appletlib.c is compiled.
The attached patchset fixes the problem by assuring libb is compiled as the last directory.
[YOCTO#10116]
(From OE-Core rev: a866a05e2c7d090a77aa6e95339c93e3592703a6)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building eudev from scratch in an sstate build results in configure errors
since the pkg-config macros can't be found. Add in a missing pkg-config
dependency using the appropriate class to avoid such failures.
(From OE-Core rev: 6b527bbfea5088c20da98cd72abe5caa4b399787)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KConfig infrastructure needs to build HOST binaries in order to
provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP
variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler
is used when compiling host binaries
(From OE-Core rev: 50fb24c889b6add053a5638a7367a8896dfebd8a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At this time systemd journald uses the /run tmpfs to store logs
by default systemd uses 15% of available space [1] of the /run
partition, when the space runs out journald starts to vaccum/store
the logs into /var/log [1].
It causes two problems one of them is timeout dev-ttySN.device's
when enable debug and use journal as systemd.log_target [2] the other
is related to don't find syslog entries into the journal log [3].
This problems are now more evident because i recently enabled the
systemd debug option in testimage [4].
One area of improvement will be add support in systemd journald to
read these parameters from the kernel cmdline like systemd.log_target,
if the support exists we could add that parameter at level of testimage.
[1] https://www.freedesktop.org/software/systemd/man/journald.conf.html#SystemMaxUse=
[2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8142#c19
[3] https://bugzilla.yoctoproject.org/show_bug.cgi?id=10128#c4
[4] http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=a86a1b2703372c12e7fca18918695d093ea6ee53
[YOCTO #10128]
(From OE-Core rev: 808952bf6d2b7549b456293ead4728b4dbf0d89b)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel does not automatically mount devtmpfs when using initramfs
based booting (even when using CONFIG_DEVTMPFS_MOUNT). If the rootfs
is built with USE_DEVFS=1 (which is the default), the system ends up
with a completely empty /dev to begin with.
Busybox uses the first entry in inittab slightly different than
other init systems:
<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is.
Since /dev/null is not there yet, Busybox throws errors instead of
executing the commands, and hence never mounts devtmpfs:
init started: BusyBox v1.24.1 (2016-09-04 11:53:14 PDT)
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
Avoid this circular dependency by not specifing <id>. With that
Busybox ends up using the stdio of the init process and executes
the inittab just fine.
(From OE-Core rev: 82de49b899bca915259ea7ea149f50e1401c2426)
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lib/oe/path.py requires xattr, fixed:
Subprocess output:
cp: cannot preserve extended attributes, cp is built without xattr support
(From OE-Core rev: 18ff7efef77120538372a81b2cc8e8479742b064)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are not available on mipsel yet so disable them
(From OE-Core rev: d7ef5e14ab1f31b0dc34b6e5965ae783b063ecbb)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are not available on mipsel yet, so disable them.
(From OE-Core rev: 33a3f2be1e84421efb0cb0f5a6f3a09b868f6931)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Firstly, these recipes are not target (MACHINE) specific so they should
by SDK_ARCH based, not PACKAGE_ARCH.
Also fix use of SDK_DEPLOY -> SDKDEPOLYDIR after other recent changes.
Together these fixes avoid various build failures and ensure the tarballs
only get built once rather than multiple times.
(From OE-Core rev: 894c9b6ded702897ae4084ef75959cdc8cc6f7a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed deployment directory from DEPLOY_DIR_IMAGE to
IMGDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
Renamed variable deploy_dir to deploy_dir_image in selftest code
to avoid confusion with DEPLOYDIR variable.
Updated the code of rootfs.py:Rootfs class to use IMGDEPLOYDIR variable
as it's now used as a new deployment destination.
(From OE-Core rev: 6d969bacc718e21a5246d4da9bf9639dcae29b02)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a busybox upstream known bug. When the busybox sed sub-command 'n'
hit the files EOF, it print an extra character that have been printed, but
the GNU sed would not print it.
In busybox source code ../editors/sed.c
------------------------------------------------------------------------
case 'n':
if (!G.be_quiet)
sed_puts(pattern_space, last_gets_char);
if (next_line) {
free(pattern_space);
pattern_space = next_line;
last_gets_char = next_gets_char;
next_line = get_next_line(&next_gets_char, &last_puts_char, last_gets_char);
substituted = 0;
linenum++;
break;
}
/* fall through */
/* Quit. End of script, end of input. */
case 'q':
/* Exit the outer while loop */
free(next_line);
next_line = NULL;
goto discard_commands;
------------------------------------------------------------------------
when read at the end of the file, the 'next_line' is null, it would go
"case 'q'" and goto discard_commands, the discard_commands would print
the old pattern space which have been printed.
So in order to comply with GNU sed, in case 'n', when the next_line is null
I add "else" at the end of the second "if": "goto again;" and send it to
the busybox upstream, the busybox maintainer adopt it and make a little
changes to the patch, we can see it at:
His reply:
http://lists.busybox.net/pipermail/busybox/2016-September/084613.html
The new patch on busybox master branch:
https://git.busybox.net/busybox/commit/?id=76d72376e0244a5cafd4880cdc623e37d86a75e4
(From OE-Core rev: 5a680c267454d7c135c4bfe4e551a780f38a5087)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example bootlogd needs devpts to be running, but bootlogd starts
at 07. Starting bootlogd early makes perfect sense, so the best option
here is to move devpts up to 06 to prevent this error message at boot:
cannot allocate pseudo tty: No such file or directory
Systems that have CONFIG_LEGACY_PTYS in the kernel will not see this
message. Since it is called "LEGACY" for a reason, fixing this in
userspace appears to be the better option here.
The devpts script does not need anything except a mounted "/dev" which
has been arranged in "S02sysfs.sh" already.
(From OE-Core rev: 4cb06256e0d13f3f5d0b280853b900d7d342b7f2)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for ipv6 and control it based
on DISTRO_FEATURES.
(From OE-Core rev: 1a505037e9a6dc86b523b378d6446baae71f1a2c)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tty can return "not a tt" which results in warnings when /etc/profile
is executed.
(From OE-Core rev: eed586dd238efe859442b21b425f04e262bcdb2b)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe is to generate an environment script in
do_populate_ide_support for using an IDE and it
doesn't generate packages at all, so inherit nopackages
(From OE-Core rev: 68e06f1782253d1b9c8d8c4d818bc4915b93d257)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: ceb58f3c24f957982a80ea56e9b6fcef53dd8949)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: f37523e2d9ddf523da12aa962cf8fbe21a355d67)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init-install.sh and init-install-efi.sh scripts perform a check
to see which devices are available on a booted system for installation.
Recently, the way we check for these devices changed on 993bfb,
greping for devices found on /sys/block/, this change caused the installer
to fail (at least) when not finding any mmcblk devices, due to the fact
that we call sh -e to execute this script, so any command (grep)
or pipeline exiting with a non-zero status causes the whole script to exit
This patch throws in a harmless true exit status at the end of the pipeline(s)
of the grep commands to avoid the installer script from exiting, fixing the issue.
[YOCTO #10189]
(From OE-Core rev: 384cf92ca9c3e66763c2c1ff2776c53d47ae25d6)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split container/vm related units into a new package, systemd-container.
The split mainly references Fedora 24, with a few differences.
Apart from the bash and zsh completion files, the differences include
adding systemd-spawn@.service into the systemd-container package.
[YOCTO #9835]
(From OE-Core rev: 2a4bf6e4c96a8104733add315166210f04c02caf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even though we are just a script, we do depend on
systemd being on the target and need an RDEPENDS
which means we cannot also be allarch.
(From OE-Core rev: ef5be3c8256419d5abec566ce266718fe317417e)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove tslib references from packagegroup-core-tools-testapps since
we removed tslib along with xtscal.
(From OE-Core rev: fe4648423ab7cc72f2d702265ca54d61537e7f88)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This further aligns this recipe with the GPLv3 version to make
it easier to spot differences between the two recipes.
(From OE-Core rev: e25a533e8ca2fc1fa897df252830825cb9a5f028)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't look like we need any of those features, so
let's disable them explicitly.
(From OE-Core rev: 0a095473eec333f918ef831dea1c2f269a64fc62)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The option is called --with(out)-lispdir, not --with(out)-lisp
(From OE-Core rev: 422c92d2806f776252c15ec9fe204b204503c4d2)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext uses internal symbols to detect whether the
implementation is compatible with GNU gettext. However,
these symbols don't are not part of the public API, they
are specific to glibc.
While musl implements the GNU gettext *API* version 1 and 2
http://www.openwall.com/lists/musl/2015/04/16/3
it doesn't implement glibc internals. This means that
gettext fails to detect musl's working implementation.
More recent versions of gettext have changed the way
GNU gettext compatibility is done
https://lists.gnu.org/archive/html/bug-gettext/2016-04/msg00000.htmlhttp://git.savannah.gnu.org/cgit/gettext.git/commit/gettext-runtime/m4/gettext.m4?id=b67399b40bc5bf3165b09e6a095ec941d4b30a97
and while we could backport the corresponding patch to
gettext.m4, we avoid doing that so as to avoid any
potential GPL-v3 issues.
So instead we force ./configure to assume that the gettext
implementation of the c-library (musl) is compatible.
As a side-effect, this also reduces image sizes as the
internal gettext implementation isn't built anymore, and
it's otherwise packaged into the main gettext package
which blows up the image as the main gettext package
contains a lot of things.
Similarly, libintl.h isn't generated anymore, as the one
from musl is OK.
(From OE-Core rev: 948f0bd162f0b1b0375db884e99a2338f47e8527)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Autodetect previously hardcoded logrotate location because it can be
installed in multiple places like /usr/bin/logrotate which is very
common besides /usr/sbin
(From OE-Core rev: 277a5975d43125623b5a51ddcb48f9ee2474d0fc)
Signed-off-by: Ovidiu Vancea <ovidiu.vancea@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ELF specification indicates symbol resolution should be breadth first, not
depth first.
The dl-deps.c: dl_build_locale_scope function is processing in a depth first
mode. This is causes certain symbols to be incorrectly reported when
LD_TRACE_PRELINKING=1 is enabled.
See glibc BZ #20488 for more information.
(From OE-Core rev: fb72263eaa94e64ddeee457b5b1bc999f0e647da)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) Upgrade glib-2.0 from 2.48.1 to 2.48.2.
2) Modify Enable-more-tests-while-cross-compiling.patch, since the data has changed.
(From OE-Core rev: f5af2742003b06f117ba34683cefd168cc78b5a0)
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There isn't anything wrong when looked into its Makefile, I guess that
it had been fixed during ugprade, and I've applied this patch locally
for more than 2 months, there isn't anything wrong.
(From OE-Core rev: 53687cadaab307fc843768d61973ed1630eb28af)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're seeing regular parallel make failures in applet headers in busybox.
This adds a patch to try and avoid the issue, building upon a fix already
backported from upstream. The patch has been sent to upstream.
[YOCTO #10116]
(From OE-Core rev: 199cef0e8a50b20d0ee6fefd1d4cf3372eba7728)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe only makes sense when systemd is enabled and otherwise causes
world build failures.
(From OE-Core rev: 5dca6cc2fcdb2799c19b1697f0647a16ce296290)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test for various files is wrong and will always be
true, even if init.d does not exist.
Exit if init.d does not exist, and correctly test for
file existence otherwise.
(From OE-Core rev: 8183309080aee45746daaff46b0506b09b5bd269)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade dbus from 1.10.8 to 1.10.10.
(From OE-Core rev: e5581343303f2cf8724019c3cbfb92a87045a7f1)
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This at least partially addresses one of the build races we've seen
on the autobuilder in busybox. Its a straightforward backport from
upstream.
(From OE-Core rev: 8599059164ad0eb908fd1177044af8bc9a9881e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using a copy would only make management of devices erroneous
and makes the system unstable in some scenarios as tools will
have to manipulate both files separately. A link ensures that
both files /proc/mounts and /etc/mtab will have the same
information at all times and this is how it is handled
on newer systems where there is such a need. Same is
suggested by busybox.
(From OE-Core rev: 9f9240d175acee274c04242fd5781094b3f5491b)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch 0015-systemd-user-avoid-using-system-auth.patch
makes PAM session for systemd-user include common-account file
which doesn't contain any session related lines and that breaks
launching "systemd --user" with the error:
Jul 29 13:03:24 intel-corei7-64 systemd[691]: user@0.service: Failed
at step PAM spawning /lib/systemd/systemd: Operation not permitted
This change fixes the patch by including common-session file
instead.
(From OE-Core rev: ecff74ab68ffca27ed856be6117124b8bc1ef2d6)
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some eMMC devices show special sub-devices such as mmcblk0boot0
etc. The installation script currently pick all of them up and
displays it to the user which makes some confusions because these
sub-devices are pretty small and complete installation including
rootfs won't be possible in most cases.
We simply now drop these sub-devices and only present the user
with the root of such mmc devices.
(From OE-Core rev: 4b4d80306de8d8a2e3a2d784890f34e4a0ecfcf0)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can take a bit for USB devices to be detected, so if a USB device is
your rootfs and you don't set rootwait you will most likely get a kernel
panic. Fix this by adding rootwait to the kernel command line on
installation.
Fixes [YOCTO #9462].
(From OE-Core rev: 40e2d36573a7a6bce377b1f9653607065ba5ffb6)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds DROPBEAR_RSAKEY_ARGS and DROPBEAR_DSSKEY_ARGS optional
parameters to /etc/default/dropbear. The contents are simply passed to
the 'dropbearkey' program when generating a host key.
The default keysize for RSA is currently 2048 bits. It takes a CortexA9
running at 700MHz between 4 and 10 seconds to calculate a keypair. The
board boots Linux in about a second, but you have to wait for several
seconds because of the keypair generation. This patch allows one to put
the line DROPBEAR_RSAKEY_ARGS="-s 1024" into /etc/default/dropbear, and
have a host key generated in about 0.2 seconds on the same CPU. This is
particulary useful for read-only rootfs systems which generate a key on
each boot.
(From OE-Core rev: c0efbcb47ab37c2d9c298fcd40ecaadd3ca050a7)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When live booting, we need to make sure the running udev processes are killed
to avoid unexepected behavior, we do this just before switching root,
once we do, a new udev process will be spawned from init and will take care
of whatever work was still missing
[YOCTO #9520]
(From OE-Core rev: e88d9e56952414e6214804f9b450c7106d04318d)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need/wan't to run resize on an ssh connection. It's useless and
it breaks the Eclipse SSH debug connection. So, we added a check.
YOCTO #9362
(From OE-Core rev: 655778769f50d3aff74d7a436d28ac31b6aebb11)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using non-tty consoles (e.g. VirtIO console /dev/hvc0) the
current init system fails with:
process '/sbin/getty 115200 hvc0' (pid 545) exited. Scheduling for restart.
can't open /dev/ttyhvc0: No such file or directory
The first field needs to be a valid device. The BusyBox inittab example
explains as follows:
"<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is."
(From OE-Core rev: a53393082f331a613cb3eb973a07bab22cefcde8)
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some hardware the name of the device node and the name in
/proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable
working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK
to have an optional alias for the checked consoles. The new format is:
<device>:<alias to check(optional)>
Fixes [YOCTO #9440].
(From OE-Core rev: 91d9f3271c12fb755ab332637b17650d5fe75ce2)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox doesn't provide a similar tool so having it in
a separate package allows to us it in addition to busybox without having
to include all of util-linux.
Before it was part of the top level util-linux package.
Now it is a separate package util-linux-prlimit but the top level package
still RRECOMMENDS it so for most users nothing should change.
(From OE-Core rev: e364ecc1216b04f2b61a88a623d2e9b5199af261)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc 2.24 is released now
https://www.sourceware.org/ml/libc-alpha/2016-08/msg00212.html
(From OE-Core rev: 01fe48252085284e2964f5dd52b8b5fa54ee10d3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
(From OE-Core rev: edec2f2de186bd20fe328fd590301495149350d4)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They are unlikely to be of any use in the target file system.
(From OE-Core rev: 5889583b3961bf09ae32418777b06db3a02816b1)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen
Richard Purdie
Paul Eggleton
Maxin B. John
Juro Bystricky
Chen Qi
Khem Raj
Christopher Larson
Joshua Lock
Alejandro Hernandez
Trevor Woerner
André Draszik
Mans Rullgard
Zheng Ruoqin
Robert P. J. Day
Mark Asselstine
Andrej Valek
Leonardo Sandoval
Lukasz Nowak
Yuanjie Huang
Jason Wessel
Yi Zhao
Nathan Lynch
Max Krummenacher
Ross Burton
Kai Kang
Fabio Berton
Joe Konno
Zubair Lutfullah Kakakhel
Mike Looijmans
Olaf Mandel
Alexander Kanavin
Armin Kuster
Richard Tollerton
Markus Lehtonen
Andre McCurdy
Robert Yang
Maciej Borzecki
Patrick Williams
Jérémy Rosen
Aníbal Limón
Stefan Agner
Ed Bartosh
Dengke Du
Jackie Huang
Jagadeesh Krishnanjanappa
Stefan Müller-Klieser
Joe Slater
André Draszik
Ovidiu Vancea
Mark Hatle
Wang Xin
Dai Caiyun
Hongxu Jia
Awais Belal
Dmitry Rozhkov
California Sullivan
Ioan-Adrian Ratiu
bavery
Pascal Bach