grub-2.00-disable-help2man patches configure.ac to disable the help2man check
because we don't need the man pages. It also then patches configure itself so
that autogen.sh doesn't have to be called for performance reasons. However,
do_configure causes a full autoreconf so this optimisation is moot, and can
cause patch failures when an existing build tree is re-used.
Instead, simply use CACHED_CONFIGUREVARS to tell configure that it can't find
help2man.
(From OE-Core rev: 34b9b2931da1fbf4c68a3e35f4ca56553058574b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the 2 patches since the functionality is upstream now.
Also sync PACKAGECONFIG with grub 2.00 recipe.
The debugedit problem for 64 bit machines in do_package is still present, though:
ERROR: debugedit failed with exit code 256 (cmd was '/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit' -b '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux' -d '/usr/src/debug' -i -l '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/debugsources.list' '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module'):
/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module: Unhandled relocation 258 in .debug_info section
ERROR: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/temp/log.do_package.29234
ERROR: Task 10 (/build/linaro/build/openembedded-core/meta/recipes-bsp/grub/grub_git.bb, do_package) failed with exit code '1'
(From OE-Core rev: cd29ff3927a6deae5e808525bd56acf7b4b0b60c)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoids it's auto-detected from sysroot, which will lead implicit results.
(From OE-Core rev: 6f9e72f77cd0b06c5ad753cb9ab05dd681690c6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
(From OE-Core rev: b4e28912af0618755ce75d0cc27d53fa9d745b30)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Move package-specific defitions to the end
* Define pciutils-ids package as ${PN}-ids
* Add SUMMARY and tweak DESCRIPTION for pciutils-ids package
(From OE-Core rev: c8c39c78878cdffe47b376b6211dd1ae45fd59d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix statement indenting and spacing issues that I happened to notice.
(From OE-Core rev: d11e297b007aba625b398c52952ec929c3b02b83)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
liblzma5 is really requiring by grub, setting RDEPENDS to xz would pull
unneeded xz binaries into rootfs.
(From OE-Core rev: 78526905999fa38047ae8f3491127cc03de3e3f6)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-mcmodel=large is not supported by gcc with version lower
than 4.4, but we don't need to use memory over 4GiB, so add
a patch to allow compilation without large model support.
(From OE-Core rev: 1d005240bcbcca97126bddb1f6d4882ba4d81fa9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To generate the target EFI image in a native package, it requires
the host gcc have the ability to do -m32/-m64 compiling, but gcc
doesn't have that support on the 32bit version of some distributions
(e.g. rehl, suse), it would fail when build a 64bit target on these
32bit hosts.
In fact, all we need from grub-efi-native is the grub-mkimage binary,
so change the solution to:
* grub-efi-native only install grub-mkimage
* grub-efi compiles target modules, generates EFI image
with grub-mkimage and deploy, but install nothing.
(From OE-Core rev: 53d3f1273983dfce2a907b39768978afe99aab1a)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid.c in acpid before 2.0.9 does not properly handle a situation in which
a process has connected to acpid.socket but is not reading any data, which
allows local users to cause a denial of service (daemon hang) via a crafted
application that performs a connect system call but no read system calls.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-1159
(From OE-Core rev: e7b2b84dece29d16b8f05daf962b69e78dd64cb3)
Signed-off-by: Yue Tao <yue.tao@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub requires bison and it will fail to configure on
the host without bison installed, add the dependency
to fix it.
(From OE-Core rev: a1510c1a8e6b8a652ae65b7e3910501f1055f87f)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Set SUMMARY instead of DESCRIPTION
* Move packaging variables to the end
* Fix spacing in LICENSE assignment
* Fix indenting
(From OE-Core rev: 92f10f733a93f1772636603c0e910daf3eb9ff42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c8d687f409a19312b34e215e7caaa39199598ed0)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a3f3f44f9a064a0158ce9ad12af7a7cb26042c97)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when execute the command "/etc/init.d/acpid stop" and "/etc/init.d/acpid
restart", it prompt "no /usr/sbin/acpid found;none killed",The acpid could
not be restarted because the script start with "!/bin/sh –e", that will
make the script stop when an error occurred. So when no 'acpid' running
(we have stopped it), the script would exit and 'restart' operation would
be stopped by ‘stop’ operation.so avoiding the error occurred, add "-o"
option,exit status 0 (not 1)if nothing done.
(From OE-Core rev: b7a8daf52c9befc773f320e54999bb91efdac334)
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when booting board,the acpid daemon display some error information.
the information as follow:
acpid: opendir(/etc/acpi/events): No such file or directory
the path "/etc/acpi/events" does not exist,so building the directory
to fix the bug.
(From OE-Core rev: 8c0cc8815919c23033a4bb937331c2650c8aee4e)
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub_2.0.0 requires xz to run or an error may occur.
(From OE-Core rev: ffa2877c06c587d4ea56c55bfd0f67a88e42a772)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all PR = "r0" from all .bb files in oe-core. This was done
with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i
We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
(From OE-Core rev: 58ae94f1b06d0e6234413dbf9869bde85f154c85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is originally from oe-classic, it seemed to
have been dropped in the transition for some reason.
However I needed this patch to boot a system with 256 byte
inodes.
(From OE-Core rev: f36fd55e8721559dee2e9b57930cd3962958ba9e)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso9660 file system support needs to be added to grub in order to
be able to correctly find the grub.cfg. The grub commands to locate
the grub.cfg also needs to be encoded into grub's default
configuration.
This change allows the resulting grub binary to work both in the hard
drive / USB boot case or the optical media boot case.
[YOCTO #4100]
(From OE-Core rev: 0bc0762a479b5182a07fccb2b1e9cd5fc15ca485)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
(From OE-Core rev: ae98a95577ba9c8a6a0d9a78d4cea33a92adff35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
(From OE-Core rev: d0bc7a53b1e61283fb155b4dcb67bc2ab3b1d7f0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcimodules can not work due to no modules.pcimap file, and has been
replaced by "lspci -k", so we can remove it.
Update lib-build-fix.patch since remove pcimodules-pciutils.diff.
[YOCTO# 5210]
(From OE-Core rev: 57bec61b05c0fea42f988dd52942c7d5ce8833fd)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
(From OE-Core rev: d9abcc0a2a691ca60cc1cb2f48f1748b0de73ac8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
(From OE-Core rev: 83cb07047658e2e2b2d721e1b01553d4df3d8636)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades the U-Boot based recipes for 2013.07 release.
This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a
single one in core. The following recipes has been upgraded:
- u-boot (remove old versions)
- u-boot-mkimage (remove old versions)
- u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked)
The u-boot-fw-utils-cross recipe has been reworked as it uses the
UBOOT_MACHINE to find default environment for use so it is indeed a
cross binary and not a native one.
(From OE-Core rev: c5fff5748e0aaf7e135fdd464c2104b1d3cbfd5a)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: print message if rule directory is inexist
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
(From OE-Core rev: 66a5d15cecdf4bd267dbae5f771ebf3768232481)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: install events directory at default.
If rule directory "${sysconfdir}/acpi/events" is inexist,
the acpid initscript will exit with success, but the daemon will be not running.
(From OE-Core rev: 8a1c6e465a562b4653f4fb4af3a3845775785485)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
[YOCTO #5018]
(From OE-Core rev: aa67b1333b4774e1845f562085f7048df65a644f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to
make grub_0.97 build with automake-1.12. However, it forgot to set up
the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib.
This in turn resulted in an unworkable grub.
This patch fixes this problem by setting up the pkgdatadir correctly.
[YOCTO #4997]
(From OE-Core rev: 883b1b396328e6cd67dcb4ca6fd8975b6e716c0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A dependency was being added on ncurses conditionally upon whether it
had been built first. Explicitly disable this dependency to stop this
from happening.
Note that grub 2.x does not need this same fix because there ncurses is only
used when building grub-emu, which is only built when the specified
target platform is "emu" which we do not use.
(From OE-Core rev: 2ca75dd0718ec37d7f131b8bcd841de6e876bd07)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user accidently tries building u-boot on a machine doesn't use u-boot
(such as qemuarm) the error message doesn't make it clear why u-boot was
skipped. To help, state the machine that was being built for again.
[ YOCTO #4945 ]
(From OE-Core rev: beef66beaee926ec3d3640b79133fdb2ccc404f0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This package isn't specific to qemux86 but all x86 machines that are using the
userspace VESA framebuffer kernel driver.
(From OE-Core rev: 3be0967f14a9865215debe7fae666bd92b4968a0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fuse is autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 5e7c3228acce9f95b506ecce9712e843c35067df)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An empty asound.conf should work for most cases. The existing asound.conf
uses plug dmix which causes arecord to fail without a special -D device
specification on the command line (as no capture device is defined).
Clear asound.conf for the default case. Any needed changes should be
made in the BSP layers.
(From OE-Core rev: 736b0da53b3b38224ae3cb6f0ebd21da7fb04f4d)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PRINC usage is removed from meta-intel, bump core PR values to ensure
no version regressions.
(From OE-Core rev: c6108ebe116eafaf0a22b5f22a3eec87c86859f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get patch from ubuntu to fix this:
error: GRUB requires a working absolute objcopy; upgrade your binutils
(From OE-Core rev: 18bb555268ecc11d0fb7d4f404a38f1b453f2928)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Override the hard-coded CFLAGS used in Makefile to reference our CFLAGS.
Without this patch if the DEBUG_OPTIMIZATION is enabled (using -O0) the
compile log shows acpid still using -O2 because the Makefile has various
hard coded CFLAGS defined. Instead of using the hard coded CFLAGS,
we simply define the proper set within the recipe itself.
(From OE-Core rev: 710e773b0677b75181506959492b37cf77a0951f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few of the recent commits have used inconsistent whitespace with
respect to tabs and spaces for indentation and alignment. Correct it.
(From OE-Core rev: 3472c1f7ab409cd91c1d4782d9e00880b84e3ae8)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a variable called UBOOT_LOCALVERSION which when set will
place a version string in the .scmversion file of the u-boot
sources. This string will be picked up by the u-boot Makefile
and will be appended to the u-boot version. This is done to
make it easier to identify what revision of the u-boot sources
are being run. For example you can use a setting like the
following to add the short commit id to the u-boot version
string:
UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
(From OE-Core rev: 566298409408c6103f7a9871bb13ae5449c4fd64)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O irony: the grub2/gnulib nag macro that says "don't use gets, use fgets" breaks the build if you're using a recent (e)glibc release that has gets removed.
Fedora already #if 0's the check in grub, so I stole their patch.
(From OE-Core rev: 261e377b08388a288ee521a3629877b89e18e42b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes definition of PCMCIAUTILS_VERSION to string from a multichacter constant to avoid segmentation fault of pccardctl command.
(From OE-Core rev: aee67a229304827a12b7776a82fb1c320da9a3c4)
Signed-off-by: Takeshi Hamasaki <hmatrjp@users.sourceforge.jp>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to recent change in the oecore layer grub-efi recipe uses separate
builddir and the paths used in the do_deply need to change accordingly.
This change avoids this build issue:
install: cannot stat `/build-fri2/tmp/work/x86_64-linux/grub-efi-i586-native/2.00-r1/grub-2.00/bootia32.efi': No such file or directory
ERROR: Function failed: do_deploy (see /build-fri2/tmp/work/x86_64-linux/grub-efi-i586-native/2.00-r1/temp/log.do_deploy.5875 for further information)
(From OE-Core rev: 11ba0231244b8a27939969353e3aa668ce78f7c6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to the correct directory to execute gnu-configize.
(From OE-Core rev: 6972e82b33af69cfef2d05b3637ecfd79a5125da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile fix (patch) was merged upsream
Out of tree builds were also fixed
(From OE-Core rev: 8d8fb11d68fbeebf1c070277e137d3dc1dee6ad6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
v86d was building directly against the staged kernel in the target
sysroot. This has been fine in the past, but with recent (3.7) changes
to user headers into the "uapi" include structure, there are no longer
Without the preprocesor protection, v86d fails to build against any
kernel with uapi header files.
v86d doesn't actually need the whole kernel tree, the exported headers
are enough to build a working binary. This change sets the v86d variable
to ${STAGING_DIR_HOST}/usr, and once the v86d build adds "include" to the
end of KDIR, we have a valid include path to the target sysroot headers.
This also works for pre-uapi kernel headers, so the change is safe for
most (if not all) kernel's with properly exported headers.
(From OE-Core rev: 8d4256b2c9f782368a16c1458e04ed61fa82691a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
P is expanded to it's multi and other prefix / suffix name,
so use BP instead which is the BaseName and Version.
(From OE-Core rev: 4e475a66c23cd2e4e109ff1fcfa2975d595537c5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing SRC_URI pointed to a Gentoo developer's private web
space. It appears that that developer has retired and that his web
space is no longer active. I've updated the SRC_URI to point to a
location where the file can now be found.
(From OE-Core rev: 2046c2a0922c4d67408578d4bf8549435fec8cd6)
Signed-off-by: Andy Dalton <a.spam.filter@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is only used by old hardware, anything that still needs it can put it in
their BSP layer directly.
(From OE-Core rev: b8dc4fc76e3a179d2712ce76e19b664236260724)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also:
* install the alias file in the correct /etc/modprobe.d directory since
this is the directory used by modprobe now;
* rewrite the alias file to be up-to-date with modprobe's syntax;
* remove the postinst/postrm scriptlets because this is just an alias
file;
[YOCTO #3598]
(From OE-Core rev: 427010fd289534d4b4af0bfd74419a4ad0eb5a39)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since update-modules became obsolete, no need for these dependencies.
Also:
* install the conf files in the modprobe.d directory. /etc/modutils is
also obsolete;
* remove postinst/postrm scriptlets since they ran update-modules and
this is just an alias file;
[YOCTO #3598]
(From OE-Core rev: ab262d33993c223ec193786951d43d13ca6691e0)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 0ada16fe509d9a8608c05d16666243c8ebe4d3b3)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle LDFLAGS properly in the Makefile to remove warning:
QA Issue: No GNU_HASH in the elf binary
(From OE-Core rev: a24a5e5c9ede4275f7188935a9410b84d406ed19)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for board specific fw_env.config file if available.
(From OE-Core rev: 5b6a8e987f9039aca63d97bc42421b78acab8a3d)
Signed-off-by: Franklin S. Cooper Jr <fcooper27jr@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Create a new packagegroup-core-device-devel which pulls in everything
that qemu-config used to, with the exception of anjuta-remote-run -
this is unlikely to be widely used
* Move the remainder of qemu-config to distcc-config and allow
DISTCC_HOSTS to be configured via a variable of the same name
* Use SUMMARY instead of DESCRIPTION for single-line description since
DESCRIPTION is defaulted from SUMMARY if not set
(From OE-Core rev: ac510cb82c007f987b481df74c7a5fede81fa85a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This need not be specific to qemu machines, allow it to be used
elsewhere in isolation.
(From OE-Core rev: c48f87a3fa9c61aaeedbcf5712a699c27d940a3b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanly shutting down the machine from Sato is useful on other machines,
not all of which have a power button that otherwise enables this, so
make it not specific to qemu* and add it to task-core-x11-sato.
(From OE-Core rev: 738005f4713c0da7bc04582a41efa956efdb9cc0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qemu-config initscript was only starting oprofile-server, so move it
to the oprofileui-server recipe.
(From OE-Core rev: 3063126e2c8ec72e900a48f7048aaf9662606792)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Given that support for Anjuta is unlikely to be needed by everyone and
is by no means specific to qemu, split it out to a separate recipe. The
following changes were made in the process:
Also depend on dbus instead of dbus-x11 since dbus-launch is now back in
he main dbus package
Part of the fix for [YOCTO #1690].
(From OE-Core rev: e6755e3351ccf1116c06b9608728630505908ce4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These files are all trivial in nature; so avoid having to have another
copy of COPYING.GPL just for this recipe - especially as it's about
to be split apart.
(All of the files in SRC_URI have only ever been contributed to by
employees of Intel and/or OpenedHand.)
(From OE-Core rev: 4d29ef0fa885299392779042830b95176e31fe11)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added -Wno-unused-result because of a read() with no result, and causing
error due to -Werror
Updated grub recipe because of a patch name change
Removed unnecessary patches (merged upstream).
(From OE-Core rev: 88cd5d99918a896f515e8bb59b7238f3ad50adff)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2916]
On some systems the host version of flex may be too old to work properly,
instead we depend on flex-native to ensure that we have the proper version
available to us. (Flex version 2.5.35 or newer is requried.)
(From OE-Core rev: b53b4c4d6dad745b2eb0ab804f7975146a81aedf)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Clarified commit message
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fbset can't find a framebuffer we end up with a mess on the console.
We might as well avoid doing this on machines without a framebuffer.
(From OE-Core rev: f5c39ea822b440ae4bdd38be94fcf8a2814d2229)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 3068d5c44667bc238f2331d36cb116403560c83f)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 998b94adbbc0f0f036c5816fbf6ee594dba90c1c)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 72fd0993d8643d7ca52d954d65395585fdf34b03)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with old regexp it wasn't reentrant, causing stuff like this:
-LD = $(CROSS_COMPILE)ld
+LD = $(CROSS_COMPILE)ld.bfd.bfd
-LDR = $(CROSS_COMPILE)ldr
+LDR = $(CROSS_COMPILE)ld.bfd.bfdr
when do_compile was reexecuted, also breaking LDR variable and
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-bsp/u-boot/u-boot/0001-config-Always-use-GNU-ld.patch
when it was used together with u-boot.inc from oe-core (meta-ti is using own u-boot.inc)
* This patch is also better solution to ld-is-gold problem then regexp in metadata.
(From OE-Core rev: f78044f85ab1a0acce852a7032fc0c81285cd4c1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2847]
Before use usbbuslist, we should check if it is valid.
(From OE-Core rev: fc6c6ce73105518f4106da469ed81d53d860a290)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By virtue of having #!/bin/bash, the usb-devices script declared that it
requires bash, however manual examination, checkbashisms and tests with
dash and busybox show that it doesn't contain any bashisms, so change
the script's header and remove the RDEPENDS on bash.
Additionally, update-usbids.sh was manually checked for bashisms, run
through checkbashisms and tested with busybox (although it did not have
a bash-specific header).
(From OE-Core rev: 651b223c5fc93c7504e304e954b9ae4640ed47c6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This cleans up code added in 2008 to use modern syntax. It is functionally
equivalent.
(From OE-Core rev: a73b314c95a21e44dc584c58639a038833c9756b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this change, an effective reautoconf happens at compile time with potentially
incorrect parameters. This change ensures it happens once, in do_configure with the
correct parameters.
(From OE-Core rev: cae93d99497b822de9607261d225385423d5daf2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested in 70067f082a we do not
need this dependency.
[YOCTO #2527]
(From OE-Core rev: ef637e417ae1c2dff7fc0ad6cb30989e72ac35ab)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current fix_for_automake patch is not complete. It fixes the install
dir of grub-mkconfig_lib but neglects to update its references in
grub-mkconfig and the grub.d/* scripts. grub-mkconfig would complain:
# grub-mkconfig
/usr/sbin/grub-mkconfig: line 98: /usr/lib/grub/grub-mkconfig_lib: No such file or directory
Backport upstream patch to fix all the references.
[YOCTO #2777]
(From OE-Core rev: 72a582874704838ddd19700bf7c300d7a7faaf9f)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Live image installer did not preserve BSP specified console= kernel parameter.
This patch updates the init scripts that are responsible for grub.cfg creation
so that options like console= are passed allong from installer to installed img
[YOCTO #2426]
(From OE-Core rev: e18c59eb5a61f265b9cad6de68359fa1430b0e58)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2527]
Modify configure.ac and the generated configure script to avoid using
help2man during the compilation process. For grub-efi we are only
deploying the EFI payload and are not installing grub on the target
root filesystem. Therefor, we do not need the man pages.
Cleanup the SRC_URI whitespace while we add a line to it.
(From OE-Core rev: 035bc3f5ee99ed3bd74219d9717239299e4bc765)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Paul Eggleton <paul.eggleton@linux.intel.com>
CC: Radu Moisan <radu.moisan@intel.com>
grub-efi-native whitespace cleanup (INC)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The setting is the same in all recipes, so move it to
the shared settings in u-boot.inc
Since FILESDIR is also being phased out, use the FILESPATH
setting as suggested by Richard Purdie.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1b78904b115b50172cf82948d8a68dc3a98005ce)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: 6597f7c77e1ccb21d73f8e3cec25bb27a901b500)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcmciautils is the appropriate PCMCIA package these days.
(From OE-Core rev: 5066f7e9750253bc4678f2884e15f0333e60932b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The u-boot tree is fully capable of parallel builds, so this
setting should not exist as a blanket setting for all of the
recipes. Going forward, if there is a parallelism issue
in u-boot, it needs to be reported and fixed there, and not
with the "make -j1" band-aid approach.
(From OE-Core rev: 7fdd1f82803df9752e908f01f7643d66b82a690e)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want to force everyone to be stripping the -Os
flags from their u-boot builds. Remove it, since it pertains
to an old toolchain issue that is no longer relevant, and it
breaks the powerpc mpc8315.
(From OE-Core rev: 5e3f777f9fcc986ae66203651830b5765bca49fd)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If building on 32bit host and creating 64bit libraries, the target
package builds should not invoke the 32bit hosts's ar. Specifically
you will get an error message like:
x86_64-linux-gcc -m64 --sysroot=/opt/qemux86-64/tmp/sysroots/qemux86-64 -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Llibs/x86emu v86_x86emu.o v86_mem.o v86_common.o v86.o -lx86emu -o v86d
libs/x86emu/libx86emu.a: could not read symbols: Archive has no index; run ranlib to add one
collect2: error: ld returned 1 exit status
(From OE-Core rev: 4bb926513084dfa6ebf5598a177239315530276e)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sz, sx and sb links were created incorrectly to lrz, they should
point to lsz.
(From OE-Core rev: 663b608357b86aba5cdf7f07291893725e579b75)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was using distro gcc to build binaries for target. This got detected
on fedora 17 alpha, on which it hit an gcc-4.7 issue.
This Fixes Bug: [Yocto #2291]
More information in the patch header
Thanks to Saul Wold for suggesting to remove the --target parameter from
EXTRA_OECONF var.
(From OE-Core rev: 26ae0e53411c1ea3afbb2e0c6d9dc2f1b0690751)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 2257]
GPT partitions are common for EFI systems. Add support for them by
including the part_gpt partition module in the grub-efi image. In
order to allow for loading a Linux kernel from an EXT* filesystem,
include the ext2 module as well.
With this fix applied, I was able to boot from a USB key using a
GPT partition table with the following layout:
$ sudo gdisk -l /dev/sdc
GPT fdisk (gdisk) version 0.8.2
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdc: 7669824 sectors, 3.7 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 68FA7CD4-E0C3-4A8E-82B5-1331C9B17A3C
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7669790
Partitions will be aligned on 2-sector boundaries
Total free space is 7428816 sectors (3.5 GiB)
Number Start (sector) End (sector) Size Code Name
1 34 32801 16.0 MiB 0700 # FAT16
2 32802 240974 101.6 MiB 0700 # EXT3
From within GRUB, booted as bootia32.efi from the BOOT partition, I
booted the OS with the following commands:
grub> linux (hd0,gpt2)/vmlinuz rootwait root=/dev/sda2 console=ttyS0,115200
grub> boot
This change will enable BSP developers to use the grub-efi image in
their own images as well as enable upcoming changes to the installer
to support EFI.
(From OE-Core rev: a2c6687410f00623efe8dfcb22385cbbc7f2e1a9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
CC: Rahul Saxena <rahul.saxena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
setserial's license is GPL version 2.0 per:
http://sourceforge.net/projects/setserial/develop
(From OE-Core rev: 07480748d0f2d5da5af64284997fe9b51607cc21)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the following package warning:
WARNING: File '/usr/bin/test-libacpi' from libacpi was already stripped, this will prevent future debugging!
(From OE-Core rev: 678b895fba610c71fcbb13555bf96322dcb15aea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using rootless X, /usr/sbin is not in PATH and thus running "fbset"
will fail; so specify /usr/sbin/fbset instead.
Fixes [YOCTO #1986]
(From OE-Core rev: fb2df75e1552e60c67449c06cd80accc40ea534e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
(From OE-Core rev: 960ee8076e860353a05eb2eb7f825a455c54698d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides the 'fw_setenv' and 'fw_getenv' programs for the target
so that the U-Boot environment can be modified from Linux. These
programs are system-agnostic and rely on a config file that a given BSP
would provide and potentially RRECOMMEND this be installed.
(From OE-Core rev: 4a2543c0641f1df6d74c18cfe0c3ac3cfd50e60c)
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for different suffixes found with later u-boot
versions which have switched from .bin to .img
* Allow recipes that include u-boot.inc to also package an
SPL if they build one.
* Minimum requirement is to set the SPL_BINARY value to add
the SPL to the u-boot package as well as into the deploy
directory.
(From OE-Core rev: 2965aa2faaccce43f6c3e451c0a2ded3734766e4)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
configure.patch was missing a closing quote in a sed expression which
causes script execution to error on less forgiving shells such as dash.
(From OE-Core rev: ad72484a2783afa948966263629006558fbde476)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Second version of the patch that adds grep to RDEPENDS.
Fixes [YOCTO #1887]
(From OE-Core rev: 6d4ff87b935d61aae63260262c0f48fe7e9d2a48)
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit replaces earlier patch
(grub-1.99_fix_for_automake_1.11.2.patch) which did not work on all distros.
Fixes these errors observed with automake 1.11.2
The useof pkglibhas become more strict compared to the earlier release
of
automake resulting in these failures.
Fixed the files related to automake to avoid the issue.
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| Makefile.am:6: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
(From OE-Core rev: ecc383f72791c3c4a3e7ccc646469706b88e68fb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
alsactl creates the state files in /var/lib/alsa by default so switch
alsa-state to use files in that location.
Further, update the alsa-state init script to have the location of the
state files sed'ed into the script at do_install time (so as to remove
hard coding of directory paths).
(From OE-Core rev: 896924c72e7b37c18819229e8160c34cdf4465c8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
alsa-state adds an init script and configuration files to enable a
consistent and centralised mechanism for setting and restoring alsa
configuration.
(From OE-Core rev: 8bc43c40cf72d5543924229146fa4106ad87b147)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes these errors observed with automake 1.11.2
The useof pkglibhas become more strict compared to the earlier release
of
automake resulting in these failures.
Fixed the files related to automake to avoid the issue.
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| Makefile.am:6: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
(From OE-Core rev: e9c5c354086546efe4114c6225d05116fb18b9fe)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is for tslib.
(From OE-Core rev: 80fcbee25036d2051538e26cd8b3d2989b0d276d)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches were marked by "UpstreamStatus:" line, fix it to use
"Upstream-Status:" instead.
(From OE-Core rev: b33b373c9a33fe0ff51104c96d1e5b105efc63ed)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
HOMEPAGE pointed to an sf.net page that said that the
page did not exist any more and after that it redirected
to the denx.de page; updated HOMEPAGE to point to that page
Also improved the description to use the official capitalisation
(From OE-Core rev: e0ebe12541a6628b7629a9be5918d0e7ea92aa33)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specify /EFI/BOOT as the grub prefix so the grub efi payload can find
the grub.cfg in the same directory. Ultimately, it might make more sense
to install the grub tools and the grub-core modules to sysroot and make the
grub-efi bbclass generate the image in the required format as part of the
bootimg generation. However, bootimg is currently the only user, so make the
correction here to resolve the immediate issue.
(From OE-Core rev: bc046c58c8f3c462972e9004dda2612b58376492)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the efi_gop module, the GRUB menu would work, but the Linux
kernel messages would not be displayed to the physical console. Adding
efi_gop causes grub to pass the proper information in the boot parameters
pointer such that the Linux kernel can detect and use the EFI framebuffer.
(From OE-Core rev: 2c2770f89b3331f635647ba1ef87d8f63cfcdfe2)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipe dirs normally have the name of the (main) package and the official name is u-boot
(From OE-Core rev: e9899d52ade2181bd97dcf79bec64650e8b0f718)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
to avoid this build error on x32:
| strip: Unable to recognise the format of the input file `test-libacpi'
| make: *** [test-libacpi] Error 1
| ERROR: oe_runmake failed
(From OE-Core rev: 4d7882a57210c88dd9e2b8619b2bd0fa4bdbf9f8)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libacpi doesn't use base_libdir for install. This patch adds
base_libdir support so that x32 libraries are installed properly.
(From OE-Core rev: 98a363ef0202511cf32f8408011c4ad178173af7)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dbus-x11 could be not needed by an image without x11.
So I modified this bb file to enable dbus-x11 when x11 is in DISTRO_FEATURES and disable \
dbus-x11 without x11 feature.
[YOCTO #1674]
(From OE-Core rev: f78cb9fbc90f6e40cd20c59ba544389662d87659)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-core only support qemu based machines, so BSP type recipe should be moved to their respective BSPs
omap3-sgx-modules can be found in the meta-ti BSP: http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/
(From OE-Core rev: 148feaa1e534ac164b0831e8c21108bae88cab30)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the anonymous python block in favor of the much simpler
COMPATIBLE_HOST mechanism.
(From OE-Core rev: 36654d6d393cb8c8a545835184a96be4ae0c885d)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "apply=yes" doesn't appear to be necessary, drop it in favor of
a simpler SRC_URI specification.
(From OE-Core rev: 978fb865897a178c3ba6b6cf3672da53c25b5171)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a recipe to build the GRUB efi images. This recipe is written as
a native recipe as the resulting GRUB utils are required to assemble
the final image. Rather than build a native and a target recipe (and
increase build times), this recipe builds the utils for the host and
passes an appropriate --target argument to the GRUB configure script
to build the modules for the target arch. The only output of this
recipe is an EFI image in the deploy directory.
Care is taken to ensure changing targets will force a rebuild of this
native recipe by including the target arch in the PN.
(From OE-Core rev: f9518a368f041ceccb4a36061d91ae64cd4dabd4)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nowadays kbd seems more active
(From OE-Core rev: 3348e9b02b922b89ecbece7922d1c6b583e1fb1d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libtool-cross uses ${HOST_SYS}- prefix while building and installing.
In some cases that may be different from ${TARGET_PREFIX}, that is currently
used in apmd recipe. It's better to have them consistent.
(From OE-Core rev: 5f1fac618fa099f6fc78cbc98f18d1c0ab792abf)
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is QA warning about this package for an architecture mismatch but
this is inappropriate in this case since the bootloader needs 32 and 64
bit code. We therefore flag the QA check to be skipped.
(From OE-Core rev: 43723e19eb5a6119c7546dc812428e792999a928)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1507]
We need to remove the file qemuarm/shutdown.desktop, or else, on qemuarm,
due to the PACKAGE_ARCH overriding from all to qemuarm in base.bbclass,
the generated deb file will be stored at
tmp/deploy/deb/qemuarm/qemu-config_1.0-r21_allarch.deb rather than
tmp/deploy/deb/all/qemu-config_1.0-r21_all.deb, and the package qemu-config
won't be installable -- task-base finally rdepends on qemu-config, so we get
the do_rootfs failure:
The following packages have unmet dependencies:
| task-base-extended: Depends: task-base but it is not going to be installed
| E: Broken packages
There is also a generic shutdown.desktop, we can keep it and use a proper
pkg_postinst to cope with the case of qemuarm.
(From OE-Core rev: 751212d5effdceab91d95705e647cf07e6820940)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pkgconfig files belong in the -dev package. They automatically add
a runtime dependency (when packaging with RPM) for "pkgconfig", which
is not desired to be installed with this package.
(From OE-Core rev: 79cd09017693e0fd1634ea9748c797fcec4dac14)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RDEPENDS is package-specific, so add ${PN} to it.
(From OE-Core rev: 2beec7ff9b177f82a897f281fa72e5d7f96246bc)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the grub-1.98 from meta-intel while upgrading it to 1.99.
(From OE-Core rev: ccd2148e686f93518dc1a80376f7ddb24587a3da)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some place pnum=1 is used which is removed as well since
striplevel=1 is default
(From OE-Core rev: 4e108857e0d40105f7ecbc55e99bd6c367bb7386)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in multilibcase, PN has multilib prefix, so it is not
correct to use PN in SRC_URI and S. instead, we've
dedicately pruned multilib prefix in BPN, so BPN is
the right alternative for PN.
(From OE-Core rev: d6dca85028640034b1a5356920aad3268bd4f1c2)
Signed-off-by: Yu Ke <ke.y@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1198]
Addes the 2011.06 version, while keeping the older 2011.03 version since
other layers might be using it still. This will need to be fixed in the
future as oe-core should only be keeping the current versions and layer
management addresses this somehow.
(From OE-Core rev: 8aec526820f9b7d3a32142ae6849d67dc273c1a6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing list, this variable isn't useful and if wanted
would be better implemented by distros using pn-X overrides.
This patch executes:
find . -regex ".*\.\(bb\|inc\)$" | xargs sed -i '/^PRIORITY = ".*"$/d'
against the tree removing the referenced. Thanks to Phil Blundell for
the command.
(From OE-Core rev: d122343362669c683acc4af295971a62cbc823fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used to work around a gcc-4.6's bug about the option.
[YOCTO #1099]
(From OE-Core rev: 909c8ff0f27064fd01853ef92977488e6a097dfe)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch changes u-boot-mkimage version to 2011.03. Unfortunately
U-Boot 2011.03 release has some problems building tools from
unconfigured tree, so this patch aslo includes the backported fixes.
(From OE-Core rev: 8a5c20417d4d6bee6dd0bcdbeb8d4f9e0696a216)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we use a tag here then bitbake has to connect to the repository to find
out the corresponding revision (so it can expand SRCPV which is part of PV,
which amongst other things is needed to determine whether or not the
package has to be rebuilt.) This occurs at parse time; on machines behind a
firewall or with no network access this can be a problem.
We wish to avoid unnecessary network accesses and network access in our
default configuration during parse time is even worse. Substituting the
git revision corresponding to the tag prevents bitbake from having to
contact the remote repository in order to expand PV.
Addresses [YOCTO #1186]
(From OE-Core rev: 04fe616bec7416b5aea55dad6896700652796239)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing PACKAGE_ARCH = "all" mechanism of sharing packages is problematic
with sstate since there are a variety of variables which have target specific
values and the sstate package therefore correctly changes signature depending
on the MACHINE setting.
This patch creates a new "allarch" class which sets:
PACKAGE_ARCH = "all"
(as per the existing convention)
INHIBIT_DEFAULT_DEPS = "1"
(since its not target specific and therefore can't depend on the cross
compiler or target libc)
TARGET_ARCH = "all"
TARGET_OS = "linux"
TARGET_CC_ARCH = "none"
(since these variables shouldn't change between the different packages and
target compiler flags shouldn't be getting used)
PACKAGE_EXTRA_ARCHS = ""
(since we shouldn't be depending on any architecture specific package architectures)
Not all PACKAGE_ARCH = "all" recipes can use this class since some run configure
checks on the compiler. This means they have target specific components and therefore
the "all" classification is incorrect.
(From OE-Core rev: 26e5e5feb695864b11e47e24017e254c28f14494)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to facilitate reuse of the oe-core u-boot recipe, there needs to be
some assurance that the oe-core version won't change without a clear indicator
to people extending it.
By renaming the recipe to include its version string instead of "git", BSP
layers can extend a specific base version of u-boot, ie.
u-boot_2011.03.bbappend. When 2011.06 becomes available, we can create that file
without instantly breaking all the BSPs depending on oe-core version of the
recipe.
As a matter of policy I would recommend we not carry more than 2 versioned
u-boot recipess at any given time. This will provide BSP layers time to migrate
to the newer version, without cluttering oe-core with numerous stale versions of
u-boot. We may decide later to resurrect u-boot_git.bb as an AUTOREV recipe to
faciliate upstream development on u-boot in the oe environment.
(From OE-Core rev: f788d4b503ecc6600612746c4936dfb9393e237c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Cc: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core does not define any machines, so it does not make sense to
add machine specific information in the oe-core u-boot recipe and
infrastructure. Also note that COMPATIBLE_MACHINES is not easily extended due to
its regex syntax: "(machine_a|machine_b)", making it difficult to extend the
u-boot recipe in bbappend files without resorting to machine specific overrides.
Remove COMPATIBLE_MACHINES and the default UBOOT_MACHINE from the recipe and
insert some anonymous python into u-boot.inc to raise SkipPackage if
UBOOT_MACHINE is not set (this ensures 'world' still works for machines that
can't build u-boot).
UBOOT_MACHINE must now be specified in each machine config that requires u-boot.
This is an improvement over requiring machine specific overrides in every BSP
layer's u-boot_git.bbappend file. For example, a beagleboard machine config
currently contains:
UBOOT_ENTRYPOINT = "0x80008000"
UBOOT_LOADADDRESS = "0x80008000"
With this change, it must now contain:
UBOOT_MACHINE = "omap3_beagle_config"
UBOOT_ENTRYPOINT = "0x80008000"
UBOOT_LOADADDRESS = "0x80008000"
So long as the SRC_URI in the base recipe can build a working u-boot for a given
machine, there is no need to create a u-boot_git.bbappend file. If additional
patches are deemed necessary, a BSP layer creates a u-boot_git.bbappend file and
extends the SRC_URI to include general or machine specific backports.
Note: I used bb.note() instead of bb.debug() to ensure the message at least
makes it to the console. From what I could gather, bb.debug() doesn't
go anywhere during recipe parsing.
(From OE-Core rev: c7a198d7472b4767047dbbfeecb4d941055262b3)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Chris Larson <clarson@kergoth.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dbus-launch moved into the dbus-x11 packages, so we need to drag it in.
Also reorder fields to better fit with the styleguide
(From OE-Core rev: dfa47303edeffa3f15f6cf53928fb9246b7c5d90)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also move the upstream location to kernel.org
(From OE-Core rev: 0e56f8a4cd0cfa0e08ed2dd091ec209d4f0f1a7f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 1029]
u-boot 2010.12 fails to run on the Beagleboard C4 and xM Rev A boards. Commit
55aacbc30e suggests there was a mixup during
development, as the MD5SUM change is from the 2011.03 SRCREV back to the
2010.12. Chances are a patch was never sent to update the SRCREV, leaving the
MD5SUM in a bad state.
Update the SRCREV and COPYING MD5SUM to use the 2011.03 version. Built
and tested on Beagleboard xM Rev A and Beagleboard Rev C4.
(From OE-Core rev: 68d301e950c06eda8c8a73db1ed299c45dee7b9f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Tested-by: Jeff Osier-Mixon <jefro@jefro.net>
Cc: Jeff Osier-Mixon <jefro@jefro.net>
Cc: Yi Zhao <yi.zhao@windriver.com>
Cc: Robert Berger <pokylinux@reliableembeddedsystems.com>
Cc: Gary Thomas <gary@mlbassoc.com>
Merged Richard's removal of PR from PV
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Upstream-Status tag to patches for the following recipes:
apmd
insserv
linuxdoc-tools
openjade
sgmlspl
at
sudo
(From OE-Core rev: 89ff546de3ce6b1c441f04d7a153c4f8d514a749)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gypsy: Add upstream status information for gypsy's patch
alsa-utils: fix upstream status typo
pulseaudio: add upstream status for pulseaudio-0.9.15's patches
hostap: add upstream status for hostap's patch
glibc: add upstream status for glibc's patch
glib-2.0: add upstream status for glib-2.0's patch
mtd-utils: add upstream status for mtd-utils patches
add upstream status for opkg's patches
mark add_vercmp.patch as inappropriate since the added function is not
used.
(From OE-Core rev: b0052e9467608cdc2e3b85f5b718e6b9c03d44ca)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for the following recipes:
pcmciautils openssl udev apt gdm
(From OE-Core rev: 552c9fa44c2a2bb94bcf83bff802773265a35a27)
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hostap: add upstream status for hostap-fw-load.patch
lrzsz: add upstream status for lrzsz's patches
bluez: add upstream status for bluez's patches
bluez-dtl1-workaround: add upstream status for COPYING.patch
libgsmd: add upstream status for gsm's patches.
gypsy: add upstream status for gypsy's patch
libpcap: add upstream status for libpcap's patches
ppp: add upstream status for ppp's patches
libtelepathy: add upstream status for libtelepathy's patches
telepathy-python: add upstream status for telepahty-python's patches
wireless-tools: add upstream status for wireless-tools's patches
wpa-supplicant: add upstream status for wpa-supplicant
zeroconf: add upstream status for zeroconf's patch
glibc: add upstream status for glibc's patches
dpkg: add upstream status for dpkg's patches
makedevs: add upstream status for makedevs's patch
opkg: add upstream status for opkg's patches
opkg-utils: add upstream status for opkg-utils's patch
minicom: add upstream status for minicom patches
rpcbind: add upstream status for rpcbind's patch
which: add upstream status for which's patch
clutter-gst: add upstream status for clutter-gst's patches
flac: add upstream status for flac's patches
gst-ffmpeg: add upstream status for gst-ffmpeg's patch
liba52: add upstream status for liba52's patch
libid3tag: add upstream status for libid3tag
libmusicbrainz: add upstream status for libmusicbrainz's patch
pulseaudio: add upstream status for pulseaudio patches
db: add upstream status for db's patch
neon: add upstream status for neon's patch
taglib: add upstream status for taglib's patches
libetpan: add upstream status for libetpan's patch
libopensync: add upstream status for libopensync's patches
libopensync-plugin-evolution2: add upstream status for its patch
libopensync-plugin-syncml: add upstream status for its patch
libsyncml: add upstream status for libsyncml's patch
empathy: add upstream status for empathy's patch
wv: add upstream status for wv's patch
xournal: add upstream status for xournal's patch
(From OE-Core rev: 0f9f0518ac46c2f2beb0224e881ff136f1603d33)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in this case, those non poky distro can also use these recipe normally
(From OE-Core rev: 0a57bd226cdb8332707fa0f46fcf0b067f03701a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
version workaround is done in recipe itself
by adding PV to CFLAGS
(From OE-Core rev: 7899ea60ec0f39a465166eea196a5b554e5cd3f5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In mirrors.bbclass we point into /pub but we don't in bitbake.conf.
All uses of KERNELORG_MIRROR look into /pub anyhow, so lets make
use of that.
(From OE-Core rev: 67a0c8f48b5ef2ae5fc712c9204e4e99818c8134)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no machine specific formfactor is found, the formfactor config defaults
to HAVE_TOUCHSCREEN=1. The result is for the matchbox session to disable
the cursor. This can lead to a lot of churn sorting out why the cursor doesn't
appear: xorg bug, xorg driver bug, kernel drm driver bug, kms bug, many
of which appear when searching for invisible cursor on the web.
On the other hand, if a cursor appears on a touchscreen device, one is much
more likely to reach a correct conclusion: "I need to set HAVE_TOUCHSCREEN=1
in my custom machine formfactor config". Which likely exists or is needed for
other formfactor specific things such as dpi, screen size, rotation, etc.
(From OE-Core rev: 361f7536e75893c51cdcb2c6449e300ee2bbd53a)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Later versions of u-boot sometimes have top level make targets
such as u-boot.imx, u-boot.kwb, and for upcoming TI devices
u-boot.ti.
* These targets define different calls to the mkimage tool to
change the images created, such as changing the load address.
* This change allows recipes to change the default make target
of "all" to something like u-boot.ti or u-boot.imx by setting
the UBOOT_MAKE_TARGET variable.
(From OE-Core rev: 1e675fac4f7f22028700d7c5bc376d029af592e0)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [BUGID #777]
The do_install rule in u-boot.inc was installing a host
tool into the target ${bindir}, which is subsequently
stripped with target strip during packaging, and the
obvious error ensues.
The native u-boot recipe has its own install rule, and
the machine specific u-boot doesn't require mkimage or
anything else in the do_install function. So we remove
it completely until it is needed again.
[sgw: PR bump]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
These are all moving to meta-extras. Ideally in the future machines
such as these will be maintained to topic specific layers as we move
to a more layer oriented model. If this causes a problem for anyone
please discuss it on the mailing list.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A number of the recipes did not properly label their pre and post
actions, causing the actions to occur in all split packages. This
was corrected by defaulting to _${PN} in most cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The LIC_CHKSUM_FILES are specific to the source determined by SRC_URI. As such,
keep all the license information together with the SRC_URI. This also avoids
confusion from having these defined in both the .inc and the .bb files. The
CHKSUM got out of date in u-boot_git.bb, so update it while we're at it.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Gary Thomas <gary@mlbassoc.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
The -Os option was disabled due to a bug in gcc building bad binaries for ARM
in an earlier commit:
f2dc7fadd8
This caused problems for powerpc which was resolved by replacing -Os with
-O2 for that architecture:
d0eb6794d9
Using -O2 also works for ARM, so there is no need to condition using -O2 on
powerpc. Remove the condition and use -O2 on all architectures.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc on PowerPC is currently compiled with -Os optimization disabled so
we have to use -O2 on PowerPC instead.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This repository is stale, the u-boot_git.bb recipe uses the upstream
repository. Remaining machines using this recipe have already been
converted to using u-boot_git.bb.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
uboot-omap3 appears to be fairly stale (last commit in April 2010) while
the upstream u-boot is making regular tagged releases. Add a new recipe
using the upstream u-boot repository.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
TI is now maintaining an upstream x-loader git repository and
sakoman will no longer be maintained. Current upstream
includes signGP and incorporates it into the Makefile. The new
Makefile ift target builds the universal MLO binary. The armv7-a
patch is included.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
SRCPV is intended being used by PV, some recipes still use
SRCREV for PV, which is not correct. This patch fix all the
misusage.
Signed-off-by: Yu Ke <ke.yu@intel.com>