The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: ceb58f3c24f957982a80ea56e9b6fcef53dd8949)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: f37523e2d9ddf523da12aa962cf8fbe21a355d67)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init-install.sh and init-install-efi.sh scripts perform a check
to see which devices are available on a booted system for installation.
Recently, the way we check for these devices changed on 993bfb,
greping for devices found on /sys/block/, this change caused the installer
to fail (at least) when not finding any mmcblk devices, due to the fact
that we call sh -e to execute this script, so any command (grep)
or pipeline exiting with a non-zero status causes the whole script to exit
This patch throws in a harmless true exit status at the end of the pipeline(s)
of the grep commands to avoid the installer script from exiting, fixing the issue.
[YOCTO #10189]
(From OE-Core rev: 384cf92ca9c3e66763c2c1ff2776c53d47ae25d6)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split container/vm related units into a new package, systemd-container.
The split mainly references Fedora 24, with a few differences.
Apart from the bash and zsh completion files, the differences include
adding systemd-spawn@.service into the systemd-container package.
[YOCTO #9835]
(From OE-Core rev: 2a4bf6e4c96a8104733add315166210f04c02caf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even though we are just a script, we do depend on
systemd being on the target and need an RDEPENDS
which means we cannot also be allarch.
(From OE-Core rev: ef5be3c8256419d5abec566ce266718fe317417e)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove tslib references from packagegroup-core-tools-testapps since
we removed tslib along with xtscal.
(From OE-Core rev: fe4648423ab7cc72f2d702265ca54d61537e7f88)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This further aligns this recipe with the GPLv3 version to make
it easier to spot differences between the two recipes.
(From OE-Core rev: e25a533e8ca2fc1fa897df252830825cb9a5f028)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't look like we need any of those features, so
let's disable them explicitly.
(From OE-Core rev: 0a095473eec333f918ef831dea1c2f269a64fc62)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The option is called --with(out)-lispdir, not --with(out)-lisp
(From OE-Core rev: 422c92d2806f776252c15ec9fe204b204503c4d2)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext uses internal symbols to detect whether the
implementation is compatible with GNU gettext. However,
these symbols don't are not part of the public API, they
are specific to glibc.
While musl implements the GNU gettext *API* version 1 and 2
http://www.openwall.com/lists/musl/2015/04/16/3
it doesn't implement glibc internals. This means that
gettext fails to detect musl's working implementation.
More recent versions of gettext have changed the way
GNU gettext compatibility is done
https://lists.gnu.org/archive/html/bug-gettext/2016-04/msg00000.htmlhttp://git.savannah.gnu.org/cgit/gettext.git/commit/gettext-runtime/m4/gettext.m4?id=b67399b40bc5bf3165b09e6a095ec941d4b30a97
and while we could backport the corresponding patch to
gettext.m4, we avoid doing that so as to avoid any
potential GPL-v3 issues.
So instead we force ./configure to assume that the gettext
implementation of the c-library (musl) is compatible.
As a side-effect, this also reduces image sizes as the
internal gettext implementation isn't built anymore, and
it's otherwise packaged into the main gettext package
which blows up the image as the main gettext package
contains a lot of things.
Similarly, libintl.h isn't generated anymore, as the one
from musl is OK.
(From OE-Core rev: 948f0bd162f0b1b0375db884e99a2338f47e8527)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Autodetect previously hardcoded logrotate location because it can be
installed in multiple places like /usr/bin/logrotate which is very
common besides /usr/sbin
(From OE-Core rev: 277a5975d43125623b5a51ddcb48f9ee2474d0fc)
Signed-off-by: Ovidiu Vancea <ovidiu.vancea@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ELF specification indicates symbol resolution should be breadth first, not
depth first.
The dl-deps.c: dl_build_locale_scope function is processing in a depth first
mode. This is causes certain symbols to be incorrectly reported when
LD_TRACE_PRELINKING=1 is enabled.
See glibc BZ #20488 for more information.
(From OE-Core rev: fb72263eaa94e64ddeee457b5b1bc999f0e647da)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) Upgrade glib-2.0 from 2.48.1 to 2.48.2.
2) Modify Enable-more-tests-while-cross-compiling.patch, since the data has changed.
(From OE-Core rev: f5af2742003b06f117ba34683cefd168cc78b5a0)
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There isn't anything wrong when looked into its Makefile, I guess that
it had been fixed during ugprade, and I've applied this patch locally
for more than 2 months, there isn't anything wrong.
(From OE-Core rev: 53687cadaab307fc843768d61973ed1630eb28af)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're seeing regular parallel make failures in applet headers in busybox.
This adds a patch to try and avoid the issue, building upon a fix already
backported from upstream. The patch has been sent to upstream.
[YOCTO #10116]
(From OE-Core rev: 199cef0e8a50b20d0ee6fefd1d4cf3372eba7728)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe only makes sense when systemd is enabled and otherwise causes
world build failures.
(From OE-Core rev: 5dca6cc2fcdb2799c19b1697f0647a16ce296290)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test for various files is wrong and will always be
true, even if init.d does not exist.
Exit if init.d does not exist, and correctly test for
file existence otherwise.
(From OE-Core rev: 8183309080aee45746daaff46b0506b09b5bd269)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade dbus from 1.10.8 to 1.10.10.
(From OE-Core rev: e5581343303f2cf8724019c3cbfb92a87045a7f1)
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This at least partially addresses one of the build races we've seen
on the autobuilder in busybox. Its a straightforward backport from
upstream.
(From OE-Core rev: 8599059164ad0eb908fd1177044af8bc9a9881e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using a copy would only make management of devices erroneous
and makes the system unstable in some scenarios as tools will
have to manipulate both files separately. A link ensures that
both files /proc/mounts and /etc/mtab will have the same
information at all times and this is how it is handled
on newer systems where there is such a need. Same is
suggested by busybox.
(From OE-Core rev: 9f9240d175acee274c04242fd5781094b3f5491b)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch 0015-systemd-user-avoid-using-system-auth.patch
makes PAM session for systemd-user include common-account file
which doesn't contain any session related lines and that breaks
launching "systemd --user" with the error:
Jul 29 13:03:24 intel-corei7-64 systemd[691]: user@0.service: Failed
at step PAM spawning /lib/systemd/systemd: Operation not permitted
This change fixes the patch by including common-session file
instead.
(From OE-Core rev: ecff74ab68ffca27ed856be6117124b8bc1ef2d6)
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some eMMC devices show special sub-devices such as mmcblk0boot0
etc. The installation script currently pick all of them up and
displays it to the user which makes some confusions because these
sub-devices are pretty small and complete installation including
rootfs won't be possible in most cases.
We simply now drop these sub-devices and only present the user
with the root of such mmc devices.
(From OE-Core rev: 4b4d80306de8d8a2e3a2d784890f34e4a0ecfcf0)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can take a bit for USB devices to be detected, so if a USB device is
your rootfs and you don't set rootwait you will most likely get a kernel
panic. Fix this by adding rootwait to the kernel command line on
installation.
Fixes [YOCTO #9462].
(From OE-Core rev: 40e2d36573a7a6bce377b1f9653607065ba5ffb6)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds DROPBEAR_RSAKEY_ARGS and DROPBEAR_DSSKEY_ARGS optional
parameters to /etc/default/dropbear. The contents are simply passed to
the 'dropbearkey' program when generating a host key.
The default keysize for RSA is currently 2048 bits. It takes a CortexA9
running at 700MHz between 4 and 10 seconds to calculate a keypair. The
board boots Linux in about a second, but you have to wait for several
seconds because of the keypair generation. This patch allows one to put
the line DROPBEAR_RSAKEY_ARGS="-s 1024" into /etc/default/dropbear, and
have a host key generated in about 0.2 seconds on the same CPU. This is
particulary useful for read-only rootfs systems which generate a key on
each boot.
(From OE-Core rev: c0efbcb47ab37c2d9c298fcd40ecaadd3ca050a7)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When live booting, we need to make sure the running udev processes are killed
to avoid unexepected behavior, we do this just before switching root,
once we do, a new udev process will be spawned from init and will take care
of whatever work was still missing
[YOCTO #9520]
(From OE-Core rev: e88d9e56952414e6214804f9b450c7106d04318d)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need/wan't to run resize on an ssh connection. It's useless and
it breaks the Eclipse SSH debug connection. So, we added a check.
YOCTO #9362
(From OE-Core rev: 655778769f50d3aff74d7a436d28ac31b6aebb11)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using non-tty consoles (e.g. VirtIO console /dev/hvc0) the
current init system fails with:
process '/sbin/getty 115200 hvc0' (pid 545) exited. Scheduling for restart.
can't open /dev/ttyhvc0: No such file or directory
The first field needs to be a valid device. The BusyBox inittab example
explains as follows:
"<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is."
(From OE-Core rev: a53393082f331a613cb3eb973a07bab22cefcde8)
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some hardware the name of the device node and the name in
/proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable
working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK
to have an optional alias for the checked consoles. The new format is:
<device>:<alias to check(optional)>
Fixes [YOCTO #9440].
(From OE-Core rev: 91d9f3271c12fb755ab332637b17650d5fe75ce2)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox doesn't provide a similar tool so having it in
a separate package allows to us it in addition to busybox without having
to include all of util-linux.
Before it was part of the top level util-linux package.
Now it is a separate package util-linux-prlimit but the top level package
still RRECOMMENDS it so for most users nothing should change.
(From OE-Core rev: e364ecc1216b04f2b61a88a623d2e9b5199af261)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc 2.24 is released now
https://www.sourceware.org/ml/libc-alpha/2016-08/msg00212.html
(From OE-Core rev: 01fe48252085284e2964f5dd52b8b5fa54ee10d3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
(From OE-Core rev: edec2f2de186bd20fe328fd590301495149350d4)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They are unlikely to be of any use in the target file system.
(From OE-Core rev: 5889583b3961bf09ae32418777b06db3a02816b1)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016.73 -> 2016.74
(From OE-Core rev: 1513e77d3f7ea9910d6ac8aab7a2f38dd6c7cd24)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"utilities" -> "utility"
(From OE-Core rev: 7a9473998d848fcd179df210deb3ffadccf23aba)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're to completely replace the standard SDK with the extensible SDK,
we need to be able to provide the standard toolchain on install without
doing anything other than installing it, so that you can install the SDK
and then point your IDE at it. This is particularly applicable to the
minimal SDK which normally installs nothing by default.
NOTE: enabling this option currently adds ~280MB to the size of the
minimal eSDK installer. If we need to reduce this further we would have
to look at adjusting the dependencies and/or the sstate_depvalid()
function in sstate.bbclass which eliminates dependencies, or look at
reducing the size of the artifacts themselves.
Implements [YOCTO #9751].
(From OE-Core rev: ed0d8ed72370df694f720cc13897493478dc1de9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a meta-recipe to bring the toolchain into the extensible SDK. This
was modelled on meta-ide-support but some adjustments were needed to the
dependency validation function in sstate.bbclass to ensure that all of
the toolchain gets installed into the sysroot. With this, after
installing a minimal eSDK you only need to run the following after
sourcing the environment setup script to get the toolchain:
devtool sdk-install meta-extsdk-toolchain
Addresses [YOCTO #9257].
(From OE-Core rev: 8110806b1b5534ae830a4fdd1a5293c86a712d0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
musl contains hand-written assembly which is not compatible with
the MIPS16e mode.
(From OE-Core rev: dbbd58cb64b12cb4dc816425eee59c56cd46301f)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc is showing its age now and upstarts like musl are approximately the same
size but with far more features and active maintainers. Remove uclibc from
oe-core and use endorse musl as the lighter alternative to full-fat glibc.
(From OE-Core rev: ff1599149942af1c36280abd4f1ed3878aaa62eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
How to upgrade gettext-minimal-native:
- Build gettext-native
- Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and
gettext-runtime/po/remove-potcdate.sin from gettext-native.
- Update COPYING when needed (usually update the year), do not copy
the whole COPYING file from gettext-native.
- Go to gettext-native's ${S}/gettext-runtime/m4:
> Remove lt*.m4 and libtool.m4
> copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/gnulib-m4/
> tar czvf /path/to/aclocal.tgz *.m4
(From OE-Core rev: 2b82c24a6b0148d1cc548605eab9be85f356ab6d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 450f4597d491789b0680940218e0e0bee7104ada)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its not immediately apparent that more than one install target could be
available. With this change we list the available devices up front then
prompt the user for which one to use, reducing confusion.
Fixes [YOCTO #9919].
(From OE-Core rev: e68774f684543fd75250e56ea88a5e0cb0a2dd0a)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bobby Bingham (2):
remove or1k version of sem.h
remove obsolete gitignore rules
Rich Felker (4):
remove obsolete and unused gethostbyaddr implementation
fix asctime day/month names not to vary by locale
fix regression in tcsetattr on all mips archs
revert unrelated change that slipped into last commit
(From OE-Core rev: 681b75cb7c1ad88774d611119c9a7f6d076ff2c5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nativesdk libc when used by buildtools has a hard requirement on supporting
a UTF-8 locale because Python 3 needs a UTF-8 locale. However we currently only
ship the C locale, which means that Python attempts to lookup the user's locale
(for example, en_NZ.UTF-8) in the locale archive under it's prefix it fails and
falls back to C. This the results in Python using ASCII instead of UTF-8 for
file encoding, and bitbake breaks.
Th obvious solution would be to ship all locales, but this would add
approximately 250MB to the size of the buildtools tarball (which is currently
around 30MB). Generating a binary locale archive reduces this down to 100MB,
but this is still a drastic increase in footprint. If we ship a subset of
locales in the tarball then there will be users whose locale isn't in the
tarball, and they'll have to change their locale to an "approved" one, which
isn't the best of messages to send to new users.
The alternative is to tell the nativesdk libc that the locale archive isn't
under it own prefix but is in fact at /usr/lib/locale/locale-archive, so the
buildtools libc uses the host locale archive. The locale archive format appears
to be at least fairly stable: our glibc 2.24 can read the locale archive
generated by glibc 2.17 (Centos 7).
[ YOCTO #9775 ]
(From OE-Core rev: 75321b6b0f2c0ac667b9350b387b01a188e195c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove a patch that is no longer needed.
License checksum changes because of a copyright year change.
(From OE-Core rev: 911510181ac933d5d1fc7d88890eb67d5d338acf)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jagadeesh Krishnanjanappa
Stefan Müller-Klieser
Alejandro Hernandez
Chen Qi
Joe Slater
Maxin B. John
André Draszik
Ovidiu Vancea
Mark Hatle
Wang Xin
Robert Yang
Richard Purdie
Dai Caiyun
Hongxu Jia
Awais Belal
Dmitry Rozhkov
California Sullivan
Mike Looijmans
Ioan-Adrian Ratiu
bavery
Stefan Agner
Pascal Bach
Khem Raj
Aníbal Limón
Robert P. J. Day
Paul Eggleton
André Draszik
Ross Burton
Jussi Kukkonen