sysmo-bts
/
generic-poky
9
0
Fork 0
Code Pull Requests Releases Activity
generic-poky/meta/packages/linux/linux-rp-2.6.24/pxa2xx_udc-clock.patch

222 lines
5.6 KiB
Diff
Raw Blame History

---
drivers/usb/gadget/pxa2xx_udc.c | 88 ++++++++++++++++++++++------------------
drivers/usb/gadget/pxa2xx_udc.h | 4 +
2 files changed, 53 insertions(+), 39 deletions(-)
--- g26.orig/drivers/usb/gadget/pxa2xx_udc.c 2008-02-19 12:47:06.000000000 -0800
+++ g26/drivers/usb/gadget/pxa2xx_udc.c 2008-02-19 14:07:17.000000000 -0800
@@ -103,6 +103,12 @@ static const char ep0name [] = "ep0";
#error "Can't configure both IXP and PXA"
#endif
+/* IXP doesn't yet support <linux/clk.h> */
+#define clk_get(dev,name) NULL
+#define clk_enable(clk) do { } while (0)
+#define clk_disable(clk) do { } while (0)
+#define clk_put(clk) do { } while (0)
+
#endif
#include "pxa2xx_udc.h"
@@ -934,20 +940,31 @@ static void udc_disable(struct pxa2xx_ud
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
* in active use.
*/
-static int pullup(struct pxa2xx_udc *udc, int is_active)
+static int pullup(struct pxa2xx_udc *udc)
{
- is_active = is_active && udc->vbus && udc->pullup;
+ int is_active = udc->vbus && udc->pullup && !udc->suspended;
DMSG("%s\n", is_active ? "active" : "inactive");
- if (is_active)
- udc_enable(udc);
- else {
- if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
- DMSG("disconnect %s\n", udc->driver
- ? udc->driver->driver.name
- : "(no driver)");
- stop_activity(udc, udc->driver);
+ if (is_active) {
+ if (!udc->active) {
+ udc->active = 1;
+ /* Enable clock for USB device */
+ clk_enable(udc->clk);
+ udc_enable(udc);
}
- udc_disable(udc);
+ } else {
+ if (udc->active) {
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+ DMSG("disconnect %s\n", udc->driver
+ ? udc->driver->driver.name
+ : "(no driver)");
+ stop_activity(udc, udc->driver);
+ }
+ udc_disable(udc);
+ /* Disable clock for USB device */
+ clk_disable(udc->clk);
+ udc->active = 0;
+ }
+
}
return 0;
}
@@ -958,9 +975,9 @@ static int pxa2xx_udc_vbus_session(struc
struct pxa2xx_udc *udc;
udc = container_of(_gadget, struct pxa2xx_udc, gadget);
- udc->vbus = is_active = (is_active != 0);
+ udc->vbus = (is_active != 0);
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
- pullup(udc, is_active);
+ pullup(udc);
return 0;
}
@@ -975,9 +992,8 @@ static int pxa2xx_udc_pullup(struct usb_
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
return -EOPNOTSUPP;
- is_active = (is_active != 0);
- udc->pullup = is_active;
- pullup(udc, is_active);
+ udc->pullup = (is_active != 0);
+ pullup(udc);
return 0;
}
@@ -1146,11 +1162,6 @@ static void udc_disable(struct pxa2xx_ud
udc_clear_mask_UDCCR(UDCCR_UDE);
-#ifdef CONFIG_ARCH_PXA
- /* Disable clock for USB device */
- clk_disable(dev->clk);
-#endif
-
ep0_idle (dev);
dev->gadget.speed = USB_SPEED_UNKNOWN;
}
@@ -1191,11 +1202,6 @@ static void udc_enable (struct pxa2xx_ud
{
udc_clear_mask_UDCCR(UDCCR_UDE);
-#ifdef CONFIG_ARCH_PXA
- /* Enable clock for USB device */
- clk_enable(dev->clk);
-#endif
-
/* try to clear these bits before we enable the udc */
udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
@@ -1286,7 +1292,7 @@ fail:
* for set_configuration as well as eventual disconnect.
*/
DMSG("registered gadget driver '%s'\n", driver->driver.name);
- pullup(dev, 1);
+ pullup(dev);
dump_state(dev);
return 0;
}
@@ -1329,7 +1335,8 @@ int usb_gadget_unregister_driver(struct
return -EINVAL;
local_irq_disable();
- pullup(dev, 0);
+ dev->pullup = 0;
+ pullup(dev);
stop_activity(dev, driver);
local_irq_enable();
@@ -2131,13 +2138,11 @@ static int __init pxa2xx_udc_probe(struc
if (irq < 0)
return -ENODEV;
-#ifdef CONFIG_ARCH_PXA
dev->clk = clk_get(&pdev->dev, "UDCCLK");
if (IS_ERR(dev->clk)) {
retval = PTR_ERR(dev->clk);
goto err_clk;
}
-#endif
pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
dev->has_cfr ? "" : " (!cfr)",
@@ -2250,10 +2255,8 @@ lubbock_fail0:
if (dev->mach->gpio_vbus)
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
-#ifdef CONFIG_ARCH_PXA
clk_put(dev->clk);
err_clk:
-#endif
return retval;
}
@@ -2269,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(stru
if (dev->driver)
return -EBUSY;
- udc_disable(dev);
+ dev->pullup = 0;
+ pullup(dev);
+
remove_proc_files();
if (dev->got_irq) {
@@ -2289,9 +2294,7 @@ static int __exit pxa2xx_udc_remove(stru
if (dev->mach->gpio_pullup)
gpio_free(dev->mach->gpio_pullup);
-#ifdef CONFIG_ARCH_PXA
clk_put(dev->clk);
-#endif
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
@@ -2317,10 +2320,15 @@ static int __exit pxa2xx_udc_remove(stru
static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
{
struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
WARN("USB host won't detect disconnect!\n");
- pullup(udc, 0);
+ udc->suspended = 1;
+
+ local_irq_save(flags);
+ pullup(udc);
+ local_irq_restore(flags);
return 0;
}
@@ -2328,8 +2336,12 @@ static int pxa2xx_udc_suspend(struct pla
static int pxa2xx_udc_resume(struct platform_device *dev)
{
struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
- pullup(udc, 1);
+ udc->suspended = 0;
+ local_irq_save(flags);
+ pullup(udc);
+ local_irq_restore(flags);
return 0;
}
--- g26.orig/drivers/usb/gadget/pxa2xx_udc.h 2008-02-19 12:47:06.000000000 -0800
+++ g26/drivers/usb/gadget/pxa2xx_udc.h 2008-02-19 12:57:42.000000000 -0800
@@ -119,7 +119,9 @@ struct pxa2xx_udc {
has_cfr : 1,
req_pending : 1,
req_std : 1,
- req_config : 1;
+ req_config : 1,
+ suspended : 1,
+ active : 1;
#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
struct timer_list timer;
-
View Git Blame Copy Permalink