Fixes [YOCTO #2385] The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk devices that should be used as the install target. These devices also have a partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected asynchronously, it is necessary to add the rootwait kernel parameter to avoid a race condition trying to mount the root device. As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2 release, we should push this to 1.2.1. The changes are perfectly contained and easily verified. Test for an mmcblk device and add the p partition prefix if necessary. Add the rootwait kernel parameter when an mmcblk device is detected. Replace the series of explicit umount commands with a single umount using a wildcard. This will find all the partitions and will not try to unmount non-existant devices. Avoid copy and paste errors by replacing /dev/${device}${pX} references with the previously assigned rootfs, bootfs, and swap variables. These changes have been tested on the FRI2 Sato image which installed to /dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both were successful. (From OE-Core rev: bf403680d72e360c7382f540ea25cfdcbe77b4e5) Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> |
||
---|---|---|
.. | ||
files | ||
initramfs-framework | ||
initramfs-boot_1.0.bb | ||
initramfs-framework_1.0.bb | ||
initramfs-live-boot_1.0.bb | ||
initramfs-live-install_1.0.bb |