Update broken web addresses in the kernel.

The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
13 years ago · 631dd1a885
parent d7eccbbae8
commit 631dd1a885
134 changed files with 183 additions and 207 deletions
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@ -15,8 +15,8 @@
 *  May be copied or modified under the terms of the GNU General Public License
 *  Based in part on the ITE vendor provided SCSI driver.
 *
- *  Documentation available from
- * 	http://www.ite.com.tw/pc/IT8212F_V04.pdf
+ *  Documentation available from IT8212F_V04.pdf
+ * 	http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
 *  Some other documents are NDA.
 *
 *  The ITE8212 isn't exactly a standard IDE controller. It has two
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@ -301,7 +301,7 @@ config ATM_IA
 	  control memory (128K-1KVC, 512K-4KVC), the size of the packet
 	  memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
 	  UTP155, UTP25, DS3 and E3). Go to:
-	  	<http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
+	  	<http://www.iphase.com/>
 	  for more info about the cards. Say Y (or M to compile as a module
 	  named iphase) here if you have one of these cards.

--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@ -34,7 +34,7 @@ config AGP_ALI
 	  X on the following ALi chipsets.  The supported chipsets
 	  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
 	  For the ALi-chipset question, ALi suggests you refer to
-	  <http://www.ali.com.tw/eng/support/index.shtml>.
+	  <http://www.ali.com.tw/>.

 	  The M1541 chipset can do AGP 1x and 2x, but note that there is an
 	  acknowledged incompatibility with Matrox G200 cards. Due to
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@ -1,7 +1,7 @@
 /*
 * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of
 * the "Intel 460GTX Chipset Software Developer's Manual":
- * http://developer.intel.com/design/itanium/downloads/24870401s.htm
+ * http://www.intel.com/design/archives/itanium/downloads/248704.htm 
 */
 /*
 * 460GX support by Chris Ahna <christopher.j.ahna@intel.com>
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@ -7,8 +7,8 @@
 *   Intel Corporation, Microsoft Corporation. Advanced Power Management
 *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
 *
- * [This document is available from Microsoft at:
- *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ * This document is available from Microsoft at:
+ *    http://www.microsoft.com/whdc/archive/amp_12.mspx
 */
 #include <linux/module.h>
 #include <linux/poll.h>
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@ -2,7 +2,7 @@
 *  ipmi_bt_sm.c
 *
 *  The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
- *  of the driver architecture at http://sourceforge.net/project/openipmi
+ *  of the driver architecture at http://sourceforge.net/projects/openipmi 
 *
 *  Author:	Rocky Craig <first.last@hp.com>
 *
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@ -1965,8 +1965,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info)

 /*
 * Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
- * Docs/TechPapers/IA64/hpspmi.pdf
+ * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
 */
 struct SPMITable {
 	s8	Signature[4];
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@ -4,7 +4,6 @@
 * Copyright by 
 * Philips Automation Projects
 * Kassel (Germany)
- * http://www.pap-philips.de
 * -----------------------------------------------------------
 * This software may be used and distributed according to the terms of
 * the GNU General Public License, incorporated herein by reference.
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@ -28,7 +28,7 @@ config CARDMAN_4000

 	  This kernel driver requires additional userspace support, either
 	  by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
-	  or via the cm4000 backend of OpenCT (http://www.opensc.com/).
+	  or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).

 config CARDMAN_4040
 	tristate "Omnikey CardMan 4040 support"
@ -41,7 +41,7 @@ config CARDMAN_4040
 	  in I/O space.  To use the kernel driver, you will need either the
 	  PC/SC ifdhandler provided from the Omnikey homepage
 	  (http://www.omnikey.com/), or a current development version of OpenCT
-	  (http://www.opensc.org/).
+	  (http://www.opensc-project.org/opensc).

 config IPWIRELESS
 	tristate "IPWireless 3G UMTS PCMCIA card support"
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@ -58,6 +58,6 @@ config TCG_INFINEON
 	  To compile this driver as a module, choose M here; the module
 	  will be called tpm_infineon.
 	  Further information on this driver and the supported hardware
-	  can be found at http://www.prosec.rub.de/tpm
+	  can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ 

 endif # TCG_TPM
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@ -7,7 +7,7 @@
 * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
 * Sirrix AG - security technologies, http://www.sirrix.com and
 * Applied Data Security Group, Ruhr-University Bochum, Germany
- * Project-Homepage: http://www.prosec.rub.de/tpm
+ * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ 
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@ -1,7 +1,7 @@
 /*
 * file for managing the edac_device class of devices for EDAC
 *
- * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)
+ * (C) 2007 SoftwareBitMaker 
 *
 * This file may be distributed under the terms of the
 * GNU General Public License.
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@ -12,7 +12,7 @@
 * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
 *
 * Written with reference to 82443BX Host Bridge Datasheet:
- * http://www.intel.com/design/chipsets/440/documentation.htm
+ * http://download.intel.com/design/chipsets/datashts/29063301.pdf 
 * references to this document given in [].
 *
 * This module doesn't support the 440LX, but it may be possible to
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@ -74,7 +74,8 @@ config EFI_PCDP

 	  You must also enable the appropriate drivers (serial, VGA, etc.)

-	  See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+	  See DIG64_HCDPv20_042804.pdf available from
+	  <http://www.dig64.org/specifications/> 

 config DELL_RBU
 	tristate "BIOS update support for DELL systems via sysfs"
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@ -15,7 +15,7 @@
 * made in setup.S, copied to safe structures in setup.c,
 * and presents it in sysfs.
 *
- * Please see http://linux.dell.com/edd30/results.html for
+ * Please see http://linux.dell.com/edd/results.html for
 * the list of BIOSs which have been reported to implement EDD.
 *
 * This program is free software; you can redistribute it and/or modify
--- a/drivers/firmware/pcdp.h
+++ b/drivers/firmware/pcdp.h
@ -1,8 +1,8 @@
 /*
 * Definitions for PCDP-defined console devices
 *
- * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
- * v2.0:  http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.),
+ * please see <http://www.dig64.org/specifications/>
 *
 * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
 *	Khalid Aziz <khalid.aziz@hp.com>
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
 * according to the hdisplay, vdisplay, vrefresh.
 * It is based from the VESA(TM) Coordinated Video Timing Generator by
 * Graham Loveridge April 9, 2003 available at
- * http://www.vesa.org/public/CVT/CVTd6r1.xls
+ * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls 
 *
 * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
 * What I have done is to translate it by using integer calculation.
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@ -12,7 +12,7 @@
 * resolution of about 0.5% of the nominal value). Temperature values are
 * reported with a 1 deg resolution and a 3 deg accuracy. Complete
 * datasheet can be obtained from Analog's website at:
- *   http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
+ *   http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 
 *
 * This driver also supports the ADM1025A, which differs from the ADM1025
 * only in that it has "open-drain VID inputs while the ADM1025 has
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@ -6,7 +6,7 @@

    Chip details at:

-    <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
+    <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@ -6,10 +6,10 @@
 * Datasheets available at:
 *
 * f75375:
- * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf 
 *
 * f75373:
- * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@ -5,7 +5,7 @@
    Copyright (C) 2007  Herbert Valerio Riedel <hvr@gnu.org>

    Complete datasheet is available at GMT's website:
-      http://www.gmt.com.tw/datasheet/g760a.pdf
+      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf 

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@ -38,7 +38,7 @@
 * available at http://developer.intel.com/.
 *
 * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
- * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * http://support.amd.com/us/Processor_TechDocs/26094.PDF 
 * Table 74. VID Code Voltages
 * This corresponds to an arbitrary VRM code of 24 in the functions below.
 * These CPU models (K8 revision <= E) have 5 VID pins. See also:
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@ -12,7 +12,7 @@
 *
 *
 * HighPoint has its own drivers (open source except for the RAID part)
- * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
+ * available from http://www.highpoint-tech.com/USA_new/service_support.htm 
 * This may be useful to anyone wanting to work on this driver, however  do not
 * trust  them too much since the code tends to become less and less meaningful
 * as the time passes... :-/
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@ -10,7 +10,6 @@
 *  Author:    Mikko Ala-Fossi            <maf@iki.fi>
 *             Jan Evert van Grootheest   <j.e.van.grootheest@caiway.nl>
 *
- *  Try:  http://www.maf.iki.fi/~maf/ht6560b/
 */

 #define DRV_NAME	"ht6560b"
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD
 	  Userspace InfiniBand Management Datagram (MAD) support.  This
 	  is the kernel side of the userspace MAD support, which allows
 	  userspace processes to send and receive MADs. You will also
-	  need libibumad from <http://www.openib.org>.
+	  need libibumad from <http://www.openfabrics.org/downloads/management/>.

 config INFINIBAND_USER_ACCESS
 	tristate "InfiniBand userspace access (verbs and CM)"
@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS
 	  to set up connections and directly access InfiniBand
 	  hardware for fast-path operations.  You will also need
 	  libibverbs, libibcm and a hardware driver library from
-	  <http://www.openib.org>.
+	  <http://www.openfabrics.org/git/>.

 config INFINIBAND_USER_MEM
 	bool
--- a/drivers/infiniband/hw/cxgb3/Kconfig
+++ b/drivers/infiniband/hw/cxgb3/Kconfig
@ -10,7 +10,7 @@ config INFINIBAND_CXGB3
 	  our website at <http://www.chelsio.com>.

 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.

 	  Please send feedback to <linux-bugs@chelsio.com>.

--- a/drivers/infiniband/hw/cxgb4/Kconfig
+++ b/drivers/infiniband/hw/cxgb4/Kconfig
@ -10,7 +10,7 @@ config INFINIBAND_CXGB4
 	  our website at <http://www.chelsio.com>.

 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.

 	  Please send feedback to <linux-bugs@chelsio.com>.

--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@ -9,4 +9,4 @@ config INFINIBAND_ISER

 	  The iSER protocol is defined by IETF.
 	  See <http://www.ietf.org/rfc/rfc5046.txt>
-	  and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF>
+	  and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc)
 * PSX support
 *
 * See documentation at:
- *	http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
+ *	http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt	
 *	http://www.gamesx.com/controldata/psxcont/psxcont.htm
- *	ftp://milano.usal.es/pablo/
 *
 */

--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode)

 /*
 * Keymap for ATCom AU-100
- * http://www.atcom.cn/En_products_AU100.html
+ * http://www.atcom.cn/products.html 
 * http://www.packetizer.com/products/au100/
 * http://www.voip-info.org/wiki/view/AU-100
 *
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@ -30,6 +30,7 @@ config MOUSE_PS2
 		<http://w1.894.telia.com/~u89404340/touchpad/index.html>
 	  and a new version of GPM at:
 		<http://www.geocities.com/dt_or/gpm/gpm.html>
+		<http://xorg.freedesktop.org/archive/individual/driver/>
 	  to take advantage of the advanced features of the touchpad.

 	  If unsure, say Y.
--- a/drivers/input/mouse/touchkit_ps2.c
+++ b/drivers/input/mouse/touchkit_ps2.c
@ -21,8 +21,8 @@
 *
 * Based upon touchkitusb.c
 *
- * Vendor documentation is available in support section of:
- * http://www.egalax.com.tw/
+ * Vendor documentation is available at:
+ * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf 
 */

 #include <linux/kernel.h>
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@ -17,7 +17,7 @@
 * found in Gateway AOL Connected Touchpad computers.
 *
 * Documentation for ICS MK712 can be found at:
- *	http://www.icst.com/pdf/mk712.pdf
+ *	http://www.idt.com/products/getDoc.cfm?docID=18713923
 */

 /*
--- a/drivers/isdn/i4l/isdn_audio.c
+++ b/drivers/isdn/i4l/isdn_audio.c
@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in,

 /*
 * Goertzel algorithm.
- * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/
+ * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ 
 * for more info.
 * Result is stored into an sk_buff and queued up for later
 * evaluation.
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@ -3,9 +3,9 @@
 *
 * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
 *
- * Documentation from
- * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
- * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
+ * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
 *
 */

--- a/drivers/media/IR/keymaps/rc-manli.c
+++ b/drivers/media/IR/keymaps/rc-manli.c
@ -13,7 +13,6 @@
 #include <media/rc-map.h>

 /* Michael Tokarev <mjt@tls.msk.ru>
-   http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
   keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
   least, and probably other cards too.
   The "ascii-art picture" below (in comments, first row
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@ -26,7 +26,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */


@ -2290,12 +2290,7 @@ static int frontend_init(struct av7110 *av7110)
 /* Budgetpatch note:
 * Original hardware design by Roberto Deza:
 * There is a DVB_Wiki at
- * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
- * where is described this 'DVB TT Budget Patch', on Card Modding:
- * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
- * On the short description there is also a link to a external file,
- * with more details:
- * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
+ * http://www.linuxtv.org/
 *
 * New software triggering design by Emard that works on
 * original Roberto Deza's hardware:
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@ -25,7 +25,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include <linux/types.h>
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ b/drivers/media/dvb/ttpci/av7110_ca.c
@ -25,7 +25,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include <linux/kernel.h>
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@ -22,7 +22,7 @@
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 /* for debugging ARM communication: */
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@ -22,7 +22,7 @@
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include <linux/kernel.h>
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@ -30,7 +30,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include "budget.h"
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@ -26,7 +26,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include <linux/module.h>
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@ -31,7 +31,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */


--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@ -27,7 +27,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include "av7110.h"
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@ -31,7 +31,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */

 #include "budget.h"
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@ -13,7 +13,7 @@
 * anybody does please mail me.
 *
 * For the pdf file see:
- * http://www.semiconductors.philips.com/pip/TEA5757H/V1
+ * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf 
 *
 *
 * CHANGES:
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@ -1,9 +1,6 @@
 /* Typhoon Radio Card driver for radio support
 * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
 *
- * Card manufacturer:
- * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
- *
 * Notes on the hardware
 *
 * This card has two output sockets, one for speakers and one for line.
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@ -978,7 +978,7 @@ config USB_STKWEBCAM
 	  Supported devices are typically found in some Asus laptops,
 	  with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
 	  may be supported by the stk11xx driver, from which this is
-	  derived, see http://stk11xx.sourceforge.net
+	  derived, see <http://sourceforge.net/projects/syntekdriver/> 

 	  To compile this driver as a module, choose M here: the
 	  module will be called stkwebcam.
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@ -4,7 +4,7 @@
 * sensor.
 *
 * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *    http://www.marvell.com/products/pc_connectivity/88alp01/ 
 *
 * Copyright 2006 One Laptop Per Child Association, Inc.
 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
 	.tv    = { 0x61, 0x60, I2C_CLIENT_END },
 };

-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
   This keeps the PCI ID database up to date. Note that the entries
   must be added under vendor 0x4444 (Conexant) as subsystem IDs.
   New vendor IDs should still be added to the vendor ID list. */
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@ -7,7 +7,7 @@
 *    (c) 2008 Steven Toth <stoth@linuxtv.org>
 *      - CX23885/7/8 support
 *
- *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@ -9,7 +9,7 @@
 *    (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
 *        - video_ioctl2 conversion
 *
- *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = {

 /********************** card configuration *******************************/

-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
   This keeps the PCI ID database up to date. Note that the entries
   must be added under vendor 0x4444 (Conexant) as subsystem IDs.
   New vendor IDs should still be added to the vendor ID list. */
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@ -3,7 +3,7 @@

    Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>

-    Visit http://www.mihu.de/linux/saa7146/mxb/
+    Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html 
    for further details about this card.

    This program is free software; you can redistribute it and/or modify
--- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@ -4,7 +4,6 @@
 *                                                                         *
 * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio                  *
 *                       <medaglia@undl.org.br>                            *
- *                       http://cadu.homelinux.com:8080/                   *
 *                                                                         *
 * Support for SN9C103, DAC Magnitude, exposure and green gain controls    *
 * added by Luca Risolia <luca.risolia@studio.unibo.it>                    *
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@ -112,8 +112,8 @@ config IBM_ASM

 	  WARNING: This software may not be supported or function
 	  correctly on your IBM server. Please consult the IBM ServerProven
-	  website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
-	  information on the specific driver level and support statement
+	  website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
+	  for information on the specific driver level and support statement
 	  for your IBM server.

 config PHANTOM
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)

 			/*
 			 * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
-			 * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
-			 *      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+			 * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 
+			 *      http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
 			 *      http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
 			 */
 			if (extp->MajorVersion != '1' ||
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@ -17,7 +17,7 @@
 *           - January 2000
 *
 *    [2] MTD internal API documentation
- *           - http://www.linux-mtd.infradead.org/tech/
+ *           - http://www.linux-mtd.infradead.org/ 
 *
 * Limitations:
 *
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@ -51,7 +51,7 @@

    Use of the FTL format for non-PCMCIA applications may be an
    infringement of these patents.  For additional information,
-    contact M-Systems (http://www.m-sys.com) directly.
+    contact M-Systems directly. M-Systems since acquired by Sandisk. 

 ======================================================================*/
 #include <linux/mtd/blktrans.h>
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@ -172,7 +172,7 @@ config MTD_OCTAGON
 	  This provides a 'mapping' driver which supports the way in which
 	  the flash chips are connected in the Octagon-5066 Single Board
 	  Computer. More information on the board is available at
-	  <http://www.octagonsystems.com/CPUpages/5066.html>.
+	  <http://www.octagonsystems.com/products/5066.aspx>.

 config MTD_VMAX
 	tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
@ -284,7 +284,7 @@ config MTD_TQM8XXL
 	  chips, currently uses AMD one. This 'mapping' driver supports
 	  that arrangement, allowing the CFI probe and command set driver
 	  code to communicate with the chips on the TQM8xxL board. More at
-	  <http://www.denx.de/embedded-ppc-en.html>.
+	  <http://www.denx.de/wiki/PPCEmbedded/>.

 config MTD_RPXLITE
 	tristate "CFI Flash device mapped on RPX Lite or CLLF"
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@ -2,7 +2,7 @@
 * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
 *
 * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *    http://wiki.laptop.org/go/Datasheets 
 *
 * Copyright © 2006 Red Hat, Inc.
 * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@ -921,7 +921,7 @@ config SMC91X
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
 	  compiled into the kernel, and read the file
 	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
-	  available from  <http://www.linuxdoc.org/docs.html#howto>.
+	  available from  <http://www.tldp.org/docs.html#howto>.

 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
@ -1021,7 +1021,7 @@ config SMC911X
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
 	  Say Y if you want it compiled into the kernel, 
 	  and read the Ethernet-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>.
+	  <http://www.tldp.org/docs.html#howto>.

 	  This driver is also available as a module. The module will be 
 	  called smc911x.  If you want to compile it as a module, say M 
@ -1503,7 +1503,7 @@ config E100

 	  For the latest Intel PRO/100 network driver for Linux, see:

-	  <http://appsr.intel.com/scripts-df/support_intel.asp>
+	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>

 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e100.txt>.
@ -1529,9 +1529,8 @@ config FEALNX
 	select CRC32
 	select MII
 	help
-	  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
-	  cards. Specifications and data at
-	  <http://www.myson.com.hk/mtd/datasheet/>.
+	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
+	  cards. <http://www.myson.com.tw/>

 config NATSEMI
 	tristate "National Semiconductor DP8381x series PCI Ethernet support"
@ -1705,7 +1704,7 @@ config SMSC9420
 	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
 	  Say Y if you want it compiled into the kernel,
 	  and read the Ethernet-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>.
+	  <http://www.tldp.org/docs.html#howto>.

 	  This driver is also available as a module. The module will be
 	  called smsc9420.  If you want to compile it as a module, say M
@ -2540,7 +2539,7 @@ config CHELSIO_T1
          our website at <http://www.chelsio.com>.

          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.

          Please send feedback to <linux-bugs@chelsio.com>.

@ -2572,7 +2571,7 @@ config CHELSIO_T3
 	  our website at <http://www.chelsio.com>.

 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.

 	  Please send feedback to <linux-bugs@chelsio.com>.

@ -2597,7 +2596,7 @@ config CHELSIO_T4
 	  our website at <http://www.chelsio.com>.

 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.

 	  Please send feedback to <linux-bugs@chelsio.com>.

@ -2620,7 +2619,7 @@ config CHELSIO_T4VF
 	  our website at <http://www.chelsio.com>.

 	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.htm>.
+	  <http://www.chelsio.com/support.html>.

 	  Please send feedback to <linux-bugs@chelsio.com>.

--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@ -18,7 +18,7 @@ config ATALK

 	  General information about how to connect Linux, Windows machines and
 	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
-	  NET-3-HOWTO, available from
+	  NET3-4-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, contains valuable
 	  information as well.

--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; 			/* The data transfer mode. */

 	In 1997 Realtek made available the documentation for the second generation
 	RTL8012 chip, which has lead to several driver improvements.
-	  http://www.realtek.com.tw/cn/cn.html
+	  http://www.realtek.com.tw/

 					Theory of Operation

--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@ -131,8 +131,8 @@ IIIa. Ring buffers

 IVb. References

-http://www.smsc.com/main/tools/discontinued/83c171.pdf
-http://www.smsc.com/main/tools/discontinued/83c175.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
 http://scyld.com/expert/NWay.html
 http://www.national.com/pf/DP/DP83840A.html

--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@ -73,7 +73,7 @@ config DMASCC
 	  certain parameters, such as channel access timing, clock mode, and
 	  DMA channel. This is accomplished with a small utility program,
 	  dmascc_cfg, available at
-	  <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
+	  <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
 	  get at least version 1.27 of dmascc_cfg, as older versions will not
 	  work with the current driver.

--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@ -23,7 +23,7 @@ paper sources:
  'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
   Document Number SC30-3661-00' by IBM for info on the adapter itself

-  Also see http://www.natsemi.com/
+  Also see http://www.national.com/analog 

 special acknowledgements to:
  - Bob Eager for helping me out with documentation from IBM
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@ -54,7 +54,7 @@
 /* anyone who has. HOWEVER the chip bears a striking resemblence */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
-/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
 /* The mapping between the registers in that document and the    */
 /* Registers in the 701 oboe chip are as follows    */

--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer.

 IVb. References

-http://www.realtek.com.tw/cn/cn.html
+http://www.realtek.com.tw/
 http://www.scyld.com/expert/NWay.html

 IVc. Errata
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
 V. References

 http://www.scyld.com/expert/NWay.html
-http://www.national.com/pf/DP/DP83840.html
+http://www.national.com/opf/DP/DP83840A.html

 Thanks to Terry Murphy of 3Com for providing development information for
 earlier 3Com products.
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@ -15,7 +15,7 @@
 *  Rewritten for 2.6 by Cesar Eduardo Barros
 *
 *  A datasheet for this chip can be found at
- *  http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
+ *  http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf 
 */

 /* Note about set_mac_address: I don't know how to change the hardware
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@ -78,7 +78,7 @@
 * 			     - Updated tlan.txt accordingly.
 * 			     - Adjusted minimum/maximum frame length.
 * 			     - There is now a TLAN website up at
- * 			       http://tlan.kernel.dk
+ * 			       http://hp.sourceforge.net/ 
 *
 * 	v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
 * 			       reports PHY information when used with Donald
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@ -5,7 +5,7 @@
 *  Originally sktr.c: Written 1997 by Christoph Goos
 *
 *  A fine result of the Linux Systems Network Architecture Project.
- *  http://www.linux-sna.org
+ *  http://www.vanheusden.com/sna/ 
 *
 *  This software may be used and distributed according to the terms
 *  of the GNU General Public License, incorporated herein by reference.
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@ -151,7 +151,7 @@ config ULI526X
 	select CRC32
 	---help---
 	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
-	  (<http://www.uli.com.tw/>).
+	  (<http://www.nvidia.com/page/uli_drivers.html>).

 	  To compile this driver as a module, choose M here. The module will
 	  be called uli526x.
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@ -32,7 +32,7 @@


 /*
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ 
 *
 * The protocol and handshaking used here should be bug-compatible
 * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@ -409,7 +409,7 @@ config CYCLADES_SYNC
 	tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
 	depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
 	---help---
-	  Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an
+	  Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an
 	  intelligent multiprotocol WAN adapter with data transfer rates up to
 	  512 Kbps. These cards support the X.25 and SNA related protocols.

--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@ -351,7 +351,7 @@ struct ath5k_srev_name {
 /*
 * Some of this information is based on Documentation from:
 *
- * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG 
 *
 * Modulation for Atheros' eXtended Range - range enhancing extension that is
 * supposed to double the distance an Atheros client device can keep a
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@ -26,7 +26,6 @@
 * Atheros presentations and papers like these:
 *
 * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
- *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
 *
 * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
 *
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@ -8,7 +8,7 @@ config P54_COMMON
 	  also need to be enabled in order to support any devices.

 	  These devices require softmac firmware which can be found at
-	  http://prism54.org/
+	  <http://wireless.kernel.org/en/users/Drivers/p54>

 	  If you choose to build a module, it'll be called p54common.

@ -20,7 +20,7 @@ config P54_USB
 	  This driver is for USB isl38xx based wireless cards.

 	  These devices require softmac firmware which can be found at
-	  http://prism54.org/
+	  <http://wireless.kernel.org/en/users/Drivers/p54>

 	  If you choose to build a module, it'll be called p54usb.

@ -34,7 +34,7 @@ config P54_PCI
 	  supported by the fullmac driver/firmware.

 	  This driver requires softmac firmware which can be found at
-	  http://prism54.org/
+	  <http://wireless.kernel.org/en/users/Drivers/p54>

 	  If you choose to build a module, it'll be called p54pci.

--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
 /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
 * driver_data
 * If you have an update for this please contact prism54-devel@prism54.org
- * The latest list can be found at http://prism54.org/supported_cards.php */
+ * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
 static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
 	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
 	{
--- a/drivers/parisc/README.dino
+++ b/drivers/parisc/README.dino
@ -10,8 +10,7 @@
 ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
 ** not affected."
 **
-** REVISIT: "go/pci_defect" link below is stale.
-**	HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/>
+** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443
 **
 **	Product		First Good Serial Number
 **  C200/C240 (US)	US67350000
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 	PCI_DEVICE_ID_INTEL_82439TX, 	quir
 *	VIA Apollo KT133 needs PCI latency patch
 *	Made according to a windows driver based patch by George E. Breese
 *	see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
+ *	and http://www.georgebreese.com/net/software/#PCI
 *      Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
 *      the info on which Mr Breese based his work.
 *
@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA,	0x605,	quirk_transparent_bridge)
 /*
 * Common misconfiguration of the MediaGX/Geode PCI master that will
 * reduce PCI bandwidth from 70MB/s to 25MB/s.  See the GXM/GXLV/GX1
- * datasheets found at http://www.national.com/ds/GX for info on what
+ * datasheets found at http://www.national.com/analog for info on what
 * these bits do.  <christer@weinigel.se>
 */
 static void quirk_mediagx_master(struct pci_dev *dev)
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket)
 * invisible during PCI scans because of a misconfigured subordinate number
 * of the parent brige - some BIOSes seem to be too lazy to set it right.
 * Does the fixup carefully by checking how far it can go without conflicts.
- * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
+ * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
 */
 static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 {
--- a/drivers/pnp/pnpbios/proc.c
+++ b/drivers/pnp/pnpbios/proc.c
@ -11,7 +11,6 @@
 *
 * The .../escd file is utilized by the lsescd utility written by