I think the last device we sold was in 2011 and I am not aware if anyone has used it for the last couple of years. Remove it to lower the complexity of the builds.neels/inmarsat
Holger Hans Peter Freyther
8 years ago
parent
4aabca2c30
commit
e8989345d2
@ -1,4 +1,3 @@
|
||||
# This will set BTS_HW_VERSION depending on the machine
|
||||
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
||||
BTS_HW_VERSION_sysmobts-v1 = "-DHW_SYSMOBTS_V1"
|
||||
BTS_HW_VERSION_sysmobts-v2 = "-DHW_SYSMOBTS_V2"
|
||||
|
||||
@ -1,15 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: sysmocom - systems for mobile communications GmbH GSM BTS
|
||||
#@DESCRIPTION: sysmocom - systems for mobile communications GmbH GSM BTS
|
||||
|
||||
# Make sure we build these too
|
||||
EXTRA_IMAGEDEPENDS = "dvnixload-native ubl u-boot sysmobts-firmware"
|
||||
EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 --no-cleanmarkers --pad=0x2000000 -n"
|
||||
|
||||
# ubifs config
|
||||
MKUBIFS_ARGS = "-m 2048 -e 129024 -c 400"
|
||||
UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
|
||||
|
||||
IMAGE_FSTYPES ?= "tar.bz2 jffs2"
|
||||
require conf/machine/include/sysmobts.inc
|
||||
|
||||
@ -1,11 +0,0 @@
|
||||
Welcome to
|
||||
____ _______ _____
|
||||
| _ \\__ __/ ____|
|
||||
___ _ _ ___ _ __ ___ ___ | |_) | | | | (___
|
||||
/ __| | | / __| '_ ` _ \\ / _ \\| _ < | | \\___ \\
|
||||
\\__ \\ |_| \\__ \\ | | | | | (_) | |_) | | | ____) |
|
||||
|___/\\__, |___/_| |_| |_|\\___/|____/ |_| |_____/
|
||||
__/ |
|
||||
|___/ by sysmocom GmbH
|
||||
|
||||
|
||||
@ -1,11 +0,0 @@
|
||||
Welcome to
|
||||
____ _______ _____
|
||||
| _ \\__ __/ ____|
|
||||
___ _ _ ___ _ __ ___ ___ | |_) | | | | (___
|
||||
/ __| | | / __| '_ ` _ \\ / _ \\| _ < | | \\___ \\
|
||||
\\__ \\ |_| \\__ \\ | | | | | (_) | |_) | | | ____) |
|
||||
|___/\\__, |___/_| |_| |_|\\___/|____/ |_| |_____/
|
||||
__/ |
|
||||
|___/ by sysmocom GmbH
|
||||
|
||||
|
||||
@ -1,16 +0,0 @@
|
||||
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
|
||||
|
||||
# The loopback interface
|
||||
auto lo
|
||||
iface lo inet loopback
|
||||
|
||||
#eth0 is our gateway to the network. ifplugd will run ifup/ifdown for us
|
||||
iface eth0 inet dhcp
|
||||
|
||||
#eth0 will provide dhcp to clients
|
||||
#auto eth0:1
|
||||
#iface eth0:1 inet static
|
||||
# address 10.42.123.1
|
||||
# netmask 255.255.255.0
|
||||
# network 10.42.123.0
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,41 +0,0 @@
|
||||
#ping = 172.31.14.1
|
||||
#ping = 172.26.1.255
|
||||
#interface = eth0
|
||||
#file = /var/log/messages
|
||||
#change = 1407
|
||||
|
||||
# Uncomment to enable test. Setting one of these values to '0' disables it.
|
||||
# These values will hopefully never reboot your machine during normal use
|
||||
# (if your machine is really hung, the loadavg will go much higher than 25)
|
||||
#max-load-1 = 24
|
||||
#max-load-5 = 18
|
||||
#max-load-15 = 12
|
||||
|
||||
# Note that this is the number of pages!
|
||||
# To get the real size, check how large the pagesize is on your machine.
|
||||
#min-memory = 1
|
||||
|
||||
#repair-binary = /usr/sbin/repair
|
||||
#repair-timeout =
|
||||
#test-binary =
|
||||
#test-timeout =
|
||||
|
||||
watchdog-device = /dev/watchdog
|
||||
|
||||
# Defaults compiled into the binary
|
||||
#temperature-device =
|
||||
#max-temperature = 120
|
||||
|
||||
# Defaults compiled into the binary
|
||||
#admin = root
|
||||
#interval = 1
|
||||
#logtick = 1
|
||||
#log-dir = /var/log/watchdog
|
||||
|
||||
# This greatly decreases the chance that watchdog won't be scheduled before
|
||||
# your machine is really loaded
|
||||
realtime = yes
|
||||
priority = 1
|
||||
|
||||
# Check if syslogd is still running by enabling the following line
|
||||
#pidfile
|
||||
@ -1,88 +0,0 @@
|
||||
##############################################################################
|
||||
#
|
||||
# Sample ggsn configuration file
|
||||
#
|
||||
##############################################################################
|
||||
|
||||
# TAG: fg
|
||||
# Include this flag if process is to run in the foreground
|
||||
#
|
||||
#fg
|
||||
|
||||
# TAG: debug
|
||||
# Include this flag to include debug information.
|
||||
#debug
|
||||
|
||||
|
||||
# TAG: conf
|
||||
# Configuration file to use. This file is the configuration file,
|
||||
# so changing this parameter in the configuration file does not make
|
||||
# sense. Use it on the command line instead.
|
||||
|
||||
# TAG: pidfile
|
||||
# File to store information about the process id of the program.
|
||||
# The program must have write access to this file/directory.
|
||||
#pidfile /var/run/ggsn.pid
|
||||
|
||||
# TAG: statedir
|
||||
# Directory to use for nonvolatile storage.
|
||||
# The program must have write access to this directory.
|
||||
#statedir /var/lib/ggsn/
|
||||
|
||||
|
||||
# TAG: listen
|
||||
# Specifies the local IP address to listen to
|
||||
#listen 10.0.0.240
|
||||
listen 10.23.123.1
|
||||
|
||||
# TAG: net
|
||||
# IP network address of external packet data network
|
||||
# Used to set up network interface.
|
||||
net 10.23.42.0/24
|
||||
|
||||
# TAG: ipup
|
||||
# Script executed after network interface has been brought up.
|
||||
# Executed with the following parameters: <devicename> <ip address>
|
||||
#ipup /etc/ggsn/ip-up
|
||||
|
||||
# TAG: ipdown
|
||||
# Script executed after network interface has been taken down.
|
||||
# Executed with the following parameters: <devicename> <ip address>
|
||||
#ipdown /etc/ggsn/ip-down
|
||||
|
||||
# TAG: dynip
|
||||
# Dynamic IP address pool.
|
||||
# Used for allocation of dynamic IP address when address is not given
|
||||
# by HLR.
|
||||
# If this option is not given then the net option is used as a substitute.
|
||||
#dynip 192.168.0.0/24
|
||||
|
||||
# TAG: statip
|
||||
# Use of this tag is currently UNSUPPORTED
|
||||
# Static IP address pool.
|
||||
# Used for allocation of static IP address by means of HLR.
|
||||
#statip 192.168.1.0/24
|
||||
|
||||
# TAG: pcodns1
|
||||
# Protocol configuration option domain name system server 1.
|
||||
pcodns1 8.8.8.8
|
||||
|
||||
# TAG: pcodns2
|
||||
# Protocol configuration option domain name system server 2.
|
||||
#pcodns2 0.0.0.0
|
||||
|
||||
# TAG: timelimit
|
||||
# Exit after timelimit seconds.
|
||||
# Setting timelimit to zero will cause the program not to exit.
|
||||
#timelimit 0
|
||||
|
||||
# TAG: apn
|
||||
# Use of this tag is EXPERIMENTAL
|
||||
# Access point name to connect to when run in client mode.
|
||||
#apn internet
|
||||
|
||||
# TAG: qos
|
||||
# Use of this tag is EXPERIMENTAL
|
||||
# Requested Quality of Service used when run in client mode.
|
||||
# 3 bytes corresponding to ????
|
||||
#qos 0x0b921f
|
||||
@ -1,23 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
NAME=gprs_routing
|
||||
|
||||
set -e
|
||||
|
||||
case "$1" in
|
||||
start)
|
||||
echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE
|
||||
echo "Enabled masquerading"
|
||||
;;
|
||||
stop)
|
||||
echo 0 > /proc/sys/net/ipv4/ip_forward
|
||||
iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
|
||||
;;
|
||||
*)
|
||||
N=/etc/init.d/$NAME
|
||||
echo "Usage: $N {start|stop|restart|force-reload}" >&2
|
||||
exit 1
|
||||
esac
|
||||
|
||||
exit 0
|
||||
@ -1,43 +0,0 @@
|
||||
# This file is part of systemd.
|
||||
#
|
||||
# systemd is free software; you can redistribute it and/or modify it
|
||||
# under the terms of the GNU Lesser General Public License as published by
|
||||
# the Free Software Foundation; either version 2.1 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# See systemd.conf(5) for details
|
||||
|
||||
[Manager]
|
||||
#LogLevel=info
|
||||
#LogTarget=journal-or-kmsg
|
||||
#LogColor=yes
|
||||
#LogLocation=no
|
||||
#DumpCore=yes
|
||||
#CrashShell=no
|
||||
#ShowStatus=yes
|
||||
#CrashChVT=1
|
||||
#CPUAffinity=1 2
|
||||
#DefaultControllers=cpu
|
||||
#DefaultStandardOutput=journal
|
||||
#DefaultStandardError=inherit
|
||||
#JoinControllers=cpu,cpuacct,cpuset net_cls,net_prio
|
||||
RuntimeWatchdogSec=45
|
||||
ShutdownWatchdogSec=45
|
||||
#CapabilityBoundingSet=
|
||||
#TimerSlackNSec=
|
||||
#DefaultLimitCPU=
|
||||
#DefaultLimitFSIZE=
|
||||
#DefaultLimitDATA=
|
||||
#DefaultLimitSTACK=
|
||||
#DefaultLimitCORE=
|
||||
#DefaultLimitRSS=
|
||||
#DefaultLimitNOFILE=
|
||||
#DefaultLimitAS=
|
||||
#DefaultLimitNPROC=
|
||||
#DefaultLimitMEMLOCK=
|
||||
#DefaultLimitLOCKS=
|
||||
#DefaultLimitSIGPENDING=
|
||||
#DefaultLimitMSGQUEUE=
|
||||
#DefaultLimitNICE=
|
||||
#DefaultLimitRTPRIO=
|
||||
#DefaultLimitRTTIME=
|
||||
@ -1,15 +0,0 @@
|
||||
COMPATIBLE_MACHINE = "sysmobts-v1"
|
||||
FIRMWARE-VERSION = "femtobts_v${PV}"
|
||||
PR = "r2.${INC_PR}"
|
||||
|
||||
require ${PN}.inc
|
||||
|
||||
do_install() {
|
||||
install -d ${D}/lib/firmware/
|
||||
|
||||
install -m 0666 ${S}/Firmware/Dsp/femtobts.out ${D}/lib/firmware/sysmobts-v1.out
|
||||
install -m 0666 ${S}/Firmware/Fpga/femtobts.bit ${D}/lib/firmware/sysmobts-v1.bit
|
||||
}
|
||||
|
||||
|
||||
FILES_${PN} = "/lib/firmware/sysmobts-v1*"
|
||||
Loading…
Reference in new issue