8f84c9539d
barebox: Add a git revision to the recipe as well
...
Make sure that the source version changes so new code is being
fetched. This should fix the build breakaage for the ODU build.
2014-12-25 09:51:14 +01:00
dbb3fa65cd
barebox-sysmocom: Upgrade to send LLDP frame during boot
...
One might need to erase the environment but with a default
environment barebox will now send a LLDP during boot up. This
way we can see if a device is on a local link or not.
Fixes: SYS#488
2014-11-20 21:51:33 +01:00
e7ed2b458e
barebox-sysmocom: Update with password propmpt
...
Change the name of the config, bump the SRCREV. The new default
password is "odu-stop".
Fixes: SYS#487
2014-11-20 20:04:32 +01:00
050a39766e
sbts2050-util: Add checksum in case it is fetched through http
2014-11-09 02:34:51 +01:00
0755723dd8
sysmobts-firmware: When fetching using http include needed checksum
...
When using HTTP to fetch the firmware we need to have a checksum
in our recipe. Add it.
2014-11-08 19:53:58 +01:00
00578db05d
ubl: Make sure we pass in the real compiler
...
Starting with gcc-4.9.1 we will need to pass the --sysroot
variable as otherwise the "stdint.h" of glibc will not be
found.
2014-11-04 23:49:41 +01:00
c44d0265ee
osmo-bts/osmo-pcu: Use autotools and pkgconfig to fix the build
...
Without inheriting pkgconfig the PKG_CHECK_MODULES macro can not
be expanded in dizzy. Fix it. While being there use "autotools"
for the pcu and not autotools_stage.
2014-09-26 11:24:49 +02:00
40c70870b7
osmo-bts/osmo-pcu: Specify the right branch for dizzy
...
With a wrong branch name the commit can not be found. Fix it.
2014-09-26 11:24:16 +02:00
28628cba81
sbts2050-util: Allow to install it on sysmoBTSv2 as well
2014-09-02 18:30:20 +02:00
b39db0cdf7
sysmobts-config: Execute sync to be sure ubifs was in sync
2014-08-28 17:57:02 +02:00
fbf5089510
sysmobts-config: Add script with postinst hook
...
Add post install script that will mangle the config to be the
right one for the given machine. This will be executed once
after the post installation. In case of the getty change the
system must re-start once to be fully usable. E.g. for the
sysmoBTS2050 the PA might not be powered up on first boot.
2014-08-28 17:50:02 +02:00
40927204e9
osmo-bts: Fix the VTY generation and output power handling
...
Fix the VTY generation and output power handling for 1100 und
1020 devices have been added.
2014-08-25 16:17:00 +02:00
e512a0a363
osmo-bts: Package the sysmobts-mgr.cfg again
...
The sysmobts-mgr regained VTY support and now has a configuration
file again. Install it and declare it as a conffile
2014-08-25 08:25:04 +02:00
b4d90d2582
osmo-bts: Upgrade with control command and improved pwr mgmt
...
This version includes the CTRL interface for clock-calibration
and improved/generic power management.
2014-08-25 08:11:59 +02:00
bf2a3bdb18
osmo-bts: Install the sysmobts-mgr.service and link it
...
Just because the the VTY/alarm handling was broken, we still want
to run the sysmobts-mgr.service to gain a response for ipaccess-find.
2014-08-21 15:24:19 +02:00
808842860d
osmo-bts: Update with direct RTP and power ramp up support
2014-07-31 14:47:40 +02:00
2b28110051
sysmobts-firmware: Remove the circular constraints as opkg can't handle them
...
Having:
osmo-bts requires sysmobts-firmware > 3.11
sysmobts-firmware requires osmo-bts > 0.4.2
is something opkg can't resolve in one go. One needs two calls to
the opkg command to end up with a fully upgraded version. Make sure
that we require/pull newer firmware when installing a new version
of osmo-bts.
2014-07-31 14:46:03 +02:00
f85927359a
sysmobts: Target firmware version 3.11
...
* Add sysmobts-firmware 3.11. The firmware will work with the
previous osmo-bts software and this one (as we don't use the
new primitives)
* Build newer version of osmo-bts with support for online
calibration and CMR fixes.
2014-07-30 12:47:48 +02:00
7de1fc45c1
barebox: Bump the PR after our change
2014-07-15 19:13:43 +02:00
e89bd0a3a1
barebox: Build newer versions for 256mb RAM and flash >= 128 MB
...
We need to build a variant of barebox that deals with only having
256mb of ram and maybe only 128mb of nand flash.
2014-07-15 19:02:52 +02:00
a4b2ba6a02
barebox: Upgrade to a version that could fix ethernet..
2014-07-14 11:29:44 +02:00
9fcc062f55
barebox-sysmocom: Have only one provide virtual/bootloader and require lzop
2014-07-14 09:32:10 +02:00
da3cf64f1e
u-boot: Remove the never working ODU support from u-boot
...
The u-boot port was never tried on a device and was only added
to get the image building. Remove now that we have barebox support
2014-07-11 18:59:24 +02:00
f18a674af3
barebox: Build a version of barebox for the ODU
...
Build a version of barebox that has support for NAND flash and
ubifs. Load the kernel from the device. One needs to flash the
*mlo*.img into the xloader partitions and the other image into
the barebox partition.
erase /dev/nand0.xload.bb
erase /dev/nand0.xload_backup1.bb
erase /dev/nand0.xload_backup2.bb
erase /dev/nand0.xload_backup3.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup1.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup2.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup3.bb
2014-07-11 18:53:23 +02:00
7aa38f0755
uboot/ubl: Build newer version for toshiba flash
...
Build newer version for the toshiba flash. Setting A1CR in the
emif has been moved to ubl and depends on the NAND chip that is
being used.
2014-07-11 12:18:38 +02:00
bf0c0ad287
Revert "osmo-bts: Depend on a specific version of the sysmobts-firmware"
...
This doesn't work like this. We need to know the _exact_ PV/PR
of the package and we don't. Specially with the PR server in dora
and later we can not know the version.
This reverts commit 767d7b6939
2014-06-22 10:30:10 +02:00
767d7b6939
osmo-bts: Depend on a specific version of the sysmobts-firmware
2014-06-20 18:57:55 +02:00
85bc905db3
osmo-pcu: Avoid crash with BFI indication of the DSP?
...
Add the hotfix to not crash on a bad frame received.
2014-06-16 21:52:52 +02:00
f8960b7bf2
osmo-bts: Do not mention the osmobts-mgr.cfg in the conf files
...
While the package can be built on dora, it can not be built on
edison. We need to comment it.
2014-06-16 20:52:39 +02:00
dfe8845a4e
osmo-pcu: Upgrade to a newer test version of the PCU
...
* "upgrade" a TBF that was assigned through the BCCH
* Rip-out the non exit code from the PCU.
2014-06-16 19:40:39 +02:00
ff29b31d6e
sysmobts: Upgrade firmware headers, firmware and the osmo-bts code
...
This upgrades the firmware from 3.6 to 3.10. This is a significant
firmware upgrade and it changed ABIs too. Try hard to fix the
dependencies as much as possible. This requires the DSP headers
files to be of version 3.10 as well but we can not have versioned
DEPENDS.
2014-06-16 19:27:42 +02:00
ea7e222c7b
osmo-bts: Revert all sysmobgs-mgr related options
...
The code has not been finished and doesn't meet the quality
standards we have for a product. Comment the sysmobts-mgr
related files that will be back soon.
2014-06-16 18:36:47 +02:00
70bfea442d
osmo-bts: Apply the sysmobts-mgr hotfix onto the last version
...
I take the most conversative route and apply the single sysmobts-mgr
patch to get a working "ipaccess-find" again.
2014-06-01 12:12:31 +02:00
9fd7612abd
ubl/u-boot: Upgrade for NAND redundancy patches
...
Let's flash multiple copies of UBL and U-Boot to cope better with
NAND bits flipping in these sectors. To fit multiple copies of
U-Boot into the flash we had to move the rootfs a bit to the end.
2014-05-23 09:04:25 +02:00
3fbe647e14
osmo-bts: Fix the CONFFILES_${PN} introduced recently
...
Daniel noticed that on upgrade his /etc/osmocom/osmo-bts.cfg
was overwritten. This was due the addition of the sysmobts-mgr
config file and using an assignment instead of an append.
2014-05-21 17:59:02 +02:00
Harald Welte
f9697c1e24
osmo-bts: update git to call osmobts-mgr with config file
2014-05-19 13:04:11 +02:00
Harald Welte
6dbc14b02c
osmo-bts: Make sure to install osmobts-mgr.cfg
2014-05-19 12:59:32 +02:00
Harald Welte
30caceef90
osmo-bts: Update to current master for CMR in AMR support
2014-05-19 11:39:52 +02:00
8ac540640d
osmo-bts: Upgrade osmo-bts to fix a stupid handover issue
2014-04-19 19:38:35 +02:00
475b32b3fe
u-boot: Fix the deployment of symlinks and install SPL/MLO
2014-03-29 13:20:00 +01:00
f23a2cbd9a
sysmocom-odu: Fix the u-boot and linux recipe
...
While the kernel resides in a dedicated kernel partition we will
still install the uImage. For u-boot we just want it to be installed.
2014-03-29 10:50:04 +01:00
d9ebe05799
u-boot: Add something that could build for the sysmocom-odu
...
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
2014-03-28 21:56:27 +01:00
2700d6a642
u-boot: Start to use spaces instead of tabs to follow OE
2014-03-28 21:55:45 +01:00
5e84042d37
u-boot: Use PV/PR again as PKGV/PKGR didn't fix the AUTOINC in the filename
2014-03-28 21:55:04 +01:00
575be79d5a
osmo-bts: Fix the AGCH through PCU socket message
2014-03-27 18:13:21 +01:00
318f4e4e52
osmo-bts: Update with max_power_red fixes and apply it
...
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
2014-03-27 07:57:45 +01:00
c872ce4a46
osmo-bts: Provide the direct PCU mode for the image
2014-03-21 19:28:59 +01:00
599e2d3679
systemd: Update osmo-bts/osmo-pcu recipes for newer service files
...
Some smaller other fixes in the osmo-pcu code
2014-03-21 19:13:23 +01:00
e797a8ac6b
sysmobts-firmware: Make the firmware conflict with older bts software
...
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
2014-03-21 16:52:30 +01:00
7c453471f1
osmo-pcu: Bump version number and requirements as well
...
The interface has not knowingly changed but it is good to
have comparable versions installed.
2014-03-21 16:52:30 +01:00
9ae58a33bf
osmo-bts: Upgrade the version number to 0.4.0
2014-03-21 16:52:29 +01:00
46098bb42e
osmo-pcu: Re-build with some cosmetic and logging changes
...
Make finding use after free more easy and change some log
regions to help in detecting what is going on.
2014-03-13 17:08:11 +01:00
ce642cba53
osmo-bts: Build newer version with handover, agch and manager changes
2014-03-13 17:08:08 +01:00
2ba19d8e54
femtobts-api: Build the latest git of the header files
2014-03-13 16:48:03 +01:00
a21e9eef6b
osmo-bts: Bump the OpenBSC sha1 to see if that forces the upgrade
2014-02-21 09:25:01 +01:00
2435a67b1a
osmo-bts: Update the revision number of the osmobts
2014-02-21 09:19:48 +01:00
926d082a27
osmo-bts: Update to the handover code
2014-02-20 18:23:34 +01:00
d1c958be3e
bts2050-util: use INSANE_SKIP so bitbake does not error out
2014-02-05 16:11:34 +01:00
5aa0de1de3
osmo-bts: Upgrade to master and install the sysmobts-mgr.service
2014-02-04 13:41:45 +01:00
9b3893f4c1
osmo-bts: Build a new version with a crash fix on init
2014-01-23 17:21:27 +01:00
Harald Welte
bb35f69066
osmo-bts: Build latest version with fMaxTxPower fix
...
As a side note, this also introduces sysmobts-mgr
2014-01-22 02:02:10 +01:00
00a590e063
dvnixload: Update with the new toolchain name in place
2014-01-20 11:41:43 +01:00
c47bdcd180
osmo-bts: This requires a newer version of OpenBSC as well
2014-01-20 11:36:25 +01:00
933b68b3e8
osmo-bts: Build latest version of osmo-bts with performance changes
2014-01-20 11:24:21 +01:00
5227148e4a
osmo-pcu: Build the latest sysmocom/master code
2014-01-20 11:10:52 +01:00
27f0ed2dc5
osmo-pcu: Update to the latest sysmocom/master version as of today
2014-01-08 10:59:55 +01:00
d6572a4b3c
osmo-pcu: add systemd support
...
The systemd-service-file was added to sysmocom/master branch so use that.
2014-01-08 10:59:19 +01:00
6ed3f9adf5
osmo-pcu: Build my latest testing version of the PCU
2013-12-03 15:38:58 +01:00
ad936987cc
ubl/u-boot: Use PKGV and PKGR instead of PV/PR for the AUTOINC
...
This should help in having no AUTOINC inside the uboot filename
but it doesn't fix it yet.
2013-11-27 12:25:01 +01:00
fc071607d1
osmo-bts: Package the sysmobts.service for systemd support
...
Use the native systemd service file to avoid running a shell script
that is ran from within the screen. This code expects the pcu to have
a .service file itself.
2013-11-27 12:23:49 +01:00
a3c2a2b55c
osmo-pcu: Update the PCU to the latest commit in my cleanup branch
2013-11-05 10:23:10 +01:00
Harald Welte
a349ce5879
update sysmobts/osmo-bts to b2a8a642d65779918f64437b5cbbde8e206222f2
...
this will add support for transmitting at higher power (model 2050)
as well as restricting the unit to use within those bands indicated
in the EEPROM.
2013-10-09 23:56:36 +02:00
83edf1dce4
osmo-bts: Build against the new libosmo-abis library
2013-10-06 17:03:45 +02:00
Harald Welte
e003221b02
sbts2050-util: Mark file as executable file
2013-10-04 23:38:25 +02:00
Harald Welte
5cf873f499
Add binary-only package for sbts2050-util
...
sbts2050-util is a small binary-only userspace program used to
interface with the sysmoBTS 2050 board management controller,
i.e. to enable/disable PA power, read power consumption/temperature
and the like.
This tool is going to disappear once the respective features have been
included in the (open source) sysmobts-util / sysmobts-mgr. Please be
patient meanwhile.
2013-10-04 22:22:53 +02:00
Harald Welte
3c99769de2
add bb recipes for sysmobts firmware 3.4 and 3.6
2013-10-04 21:53:10 +02:00
Harald Welte
a2a2d67e1a
femtobts-api: Update to v3.6. Compatible with all v3.x header files.
2013-10-04 21:41:04 +02:00
Harald Welte
b16ceec77f
update to recent osmo-bts master to include sysmobts-util
...
sysmobts-util is used to set/get the model_number / trx_nr on the sysmoBTS 2050.
2013-10-04 21:40:30 +02:00
Harald Welte
7fa273ffc2
Initial support for a MACHINE="sysmobts-2050" build
...
The build differs in that it doesn't use a getty on ttyS0. In the fuutre,
a modified kernel serial driver as well as a 2050-specific utility
for managing the supervisor processor will follow.
2013-10-04 21:39:52 +02:00
57cc5e9c58
osmo-bts: Update to an experimental version that uses libosmo-abis
...
This is a osmo-bts that will use libosmo-abis for OML and RSL and
is based on master. In one way it should improve quality in another
it is also testing.
2013-08-01 19:45:00 +02:00
ffce9e7f87
osmo-pcu: Build a 'hack'/tmp branch that exits the PCU after a BTS loss
...
This will make the PCU exit after a BTS is lost. This is because the
PCU is not resetting all the state and then BSSGP might not come up
properly.
2013-07-11 17:05:40 +02:00
f79726fdcc
osmo-bts: Move to a new 0.3.0-next release with EEPROM reading
2013-06-24 08:28:02 +02:00
040f4432f5
osmo-bts: Upgrade to the latest sysmocom/0.3.0-next version
...
This introduces the auto-band that will help in managing configurations.
2013-06-20 18:21:28 +02:00
fea919fa5d
osmo-bts: Build the 0.3.0-next branch with further improvements
...
This is a bigger update and brings the SAPI queue, readv/writev
and realtime scheduling to the sysmobts software. This will greatly
improve the stability of the software under load.
2013-06-20 14:39:39 +02:00
0ca774fc19
u-boot: Build a new version with the "force" option for the recovery
2013-06-01 18:50:54 +02:00
1bca046d23
u-boot: Build a new u-boot with increase system malloc
...
This should be more than 10MB and should help with the ubifs
recovery needed during boot.
2013-05-10 18:12:13 +02:00
cd0d240314
meta-toolchain-sysmobts: Introduce a toolchain target for the BTS
...
Install the sysmobts firmware headers on top of the Osmocom toolchain.
This way the SDK can be used to re-compile both the OpenBSC and the
osmo-bts software.
Make sure the -dev package of the femtobts-api has not runtime
dependencies to a library that does not exist.
2013-03-19 19:54:02 +01:00
d01ad496af
femtobts-api_git.bb: Do not use symbolic names for the SRCREV
...
The name will be resolved to the hash during parse time. This will
not work when not having access to the internet. Use the sha1 sum
to make offline builds work.
2013-03-19 19:54:02 +01:00
Harald Welte
1c3982289e
osmo-bts: fix git revision.
2013-03-17 17:43:45 +01:00
Harald Welte
c793b65258
osmo-pcu: Use parenthesis for osmo-bts version in RDEPENDS
2013-03-17 17:42:00 +01:00
Harald Welte
2bae25e4cd
osmo-pcu: make sure to use RDEPENDS to osmo-bts with PCU IF v5
...
As Holger points out, we need a runtime dependency, not build time
2013-03-17 17:36:56 +01:00
Harald Welte
410d086a5a
update omso-pcu + osmo-bts to current master
...
This uses PCU API version 5 including RSSI measurements
2013-03-17 17:20:41 +01:00
2257338267
osmo-bts: Update once more for sysvinit related scripts
...
* The /etc/init.d/sysmobts stop target is now working. It will
terminate the screen, the run loop, the sysmobts and osmo-pcu.
2013-03-16 23:35:08 +01:00
99a6840eb4
osmo-bts: Upgrade for change in respawn scripts and misc fixes
...
* Fix the link timeout handling as found in post-review.
* Fix the set bts attr parsing due a funny parsing error.
* Sleep 10 seconds after the execution, reload DSP and FPGA firmware
2013-03-16 19:19:36 +01:00
b6780a5826
sysmobts-firmware: Remove comment about both versions being installed
...
As of issue #48 we do not separate firmware for revc and revd. Remove
the comment about both versions being installed in parallel.
2013-03-14 14:03:40 +01:00
Harald Welte
b67bed4d3a
Add recipes for firmware v3.2 and v3.3
2013-03-13 13:48:43 +01:00
Harald Welte
c71b4ead63
osmo-bts: Update to current git master
...
This will include
* Fix of CHAN_NR IEI in common channel RSL messages generated by BTS
* zecke/request_queueing
* Improve shutdown of DSP on exit
* various calib updates
* GSMTAP: use RxLevel and RxQual
* DSP power control bypass on ul_power_target==0
* Add radio link timeout procedure
2013-03-13 12:47:14 +01:00
Harald Welte
5b6ad0ce9d
osmo-pcu: Make sure to actually build sysmobts support on v2
2013-03-09 01:05:03 +00:00
Harald Welte
e518a3224a
osmo-pcu: Only build DSP support on sysmobts v2, not also v1
2013-03-02 15:22:21 +01:00
Harald Welte
cf29168330
update osmo-bts for further ortp fixes
2013-02-09 14:19:12 +01:00
Harald Welte
bcf7764458
update osmo-bts for the "rtp bind-ip" related fixes
2013-02-09 13:30:42 +01:00
Harald Welte
d0d30fee99
sysmobts-firmware_v2.7: Fix build on sysmobts_v1
2013-02-06 15:35:17 +01:00
Harald Welte
557e1b47ba
femtobts-api: ensure SRCREV is set on non-sysmobts machines.
...
COMPATIBLE_MACHINE didn't work, unfortunately.
2013-01-29 15:25:42 +01:00
Harald Welte
aff7df713e
bump version number in order to avoid backwards 'gitr3 -> gitr1'
2013-01-14 02:06:56 +01:00
Harald Welte
be7111d6c6
osmo-pcu: Update to most recent version including configuration file
2013-01-14 01:16:01 +01:00
Harald Welte
5b7eff1c95
update osmo-bts to current git head
...
this introduces (among other things) pcu start + re-spawning support
2013-01-14 01:16:01 +01:00
Harald Welte
350981f9a8
update osmo-pcu; enable direct DSP queue access
2013-01-14 01:16:01 +01:00
Harald Welte
df64e62c45
update PCU git version to include NS VTY support
2013-01-11 18:46:16 +01:00
38d2ca2f36
osmo-bts: Go back to the version from before the congress
2013-01-06 21:11:09 +01:00
f9756a1ec6
osmo-bts: Another downgrade to look at broken channels
2012-12-30 16:59:42 +01:00
1c5bff88f1
osmo-bts: Another downgrade from the experimental branch
2012-12-30 16:50:39 +01:00
f63bb56056
osmo-bts: Downgrade OpenBSC to have a sacch_deact variable
2012-12-30 15:56:26 +01:00
671337f9c8
osmo-bts: Go back to a un-modified channel release handling
2012-12-30 15:43:19 +01:00
99d3462a72
osmo-bts: More experimental version with channel ack/release changes/fixes
2012-12-30 11:38:39 +01:00
99fabcdfd6
osmo-bts: Upgrade to a test version for channel act and deact
2012-12-29 13:29:31 +01:00
6f27e12588
sysmobts-firmware: Install both 3.0.1pre and 3.1 and add symlinks
...
The latest release currently does not support the RevC hardware. Install
both 3.0.1pre and 3.1 (luckily ubifs compresses them) and set a symlink.
Use the EEPROM size as an indicator if we are on revD or revC hardware
and then set the symlink. It has been tested for revC and needs to be tested
on revD hardware.
2012-12-22 12:16:00 +01:00
f36b6907a9
osmo-bts: Upgrade to master to get file based calibration
2012-12-21 18:39:18 +01:00
Harald Welte
55b7b92f34
osmo-bts: Update git rev + recipe changes for sysmobts v1 support
...
sysmobts-calib is currently only compatible with (and built for) v2.
2012-12-18 22:23:18 +01:00
Harald Welte
a1aad22e4e
sysmobts-firmware: Re-work the firmware and header for v1 and v2
...
Re-work the way we distribute the header and firmware files. The header
files may be accessed by everyone but the firmware may only be used by
owners of our device. Create a header only repository with all the header
versions of the firmware and create tarballs for specific releases that
will be provided to our customers. Use COMPATIBLE_MACHINE to pick the right
firmware and API version depending on sysmoBTSv1 and sysmoBTSv2.
2012-12-18 22:23:18 +01:00
Harald Welte
638474f669
osmo-bts: update osmo-bts to version 0.1.0 including calibration support
2012-12-18 21:02:22 +01:00
b272d37c60
osmo-pcu: 3ef16cc04a096ea5bbec5bb4e3988cc5d16766e9 has been GCed
...
Upgrade the osmo-pcu version to the jolly_merge branch and change
the way the PCU is enabled for the sysmoBTSv2 hardware.
2012-12-18 20:56:29 +01:00
dbb57efcd1
u-boot: Upgrade for sysmoBTSv2 revision D
...
Build a newer u-boot for revision D hardware
2012-12-18 15:08:08 +01:00
9106dd27b9
sysmobts: Do not print the queue underrun as notice but as debug
2012-11-25 23:04:27 +01:00
16aafee394
sysmobts: Build experimental version for a possible LAPDm UI idle frame fix
2012-11-25 21:13:13 +01:00
Harald Welte
b13eaf470f
update git revision of osmo-bts and osmo-pcu
2012-11-02 14:00:32 +01:00
5e17d8e537
Attempt to target multiple versions of Poky at the same time
...
The idea is that the basic extension resides inside the the normal
recipe directories. Depending on the version of poky the bbappends
need to be included. Appends applying to all versions will be put
into the shared folder, specific ones into the specific directory.
Once a bbappend can not be shared anymore it needs to be copied.
2012-09-15 17:44:57 +02:00
d6415c8069
sysmocom: Make dvnixload and ubl accessible via public git
...
dvnixload and ubl are available via public git.
2012-08-21 15:14:47 +02:00
bbbc805a2d
femtobts: Drop the old femtobts calibration utility
...
A new version can be found inside the osmo-bts repository.
2012-08-20 19:26:31 +02:00
f5b92b4bf2
u-boot: Upgrade to a version with the recovery mode
2012-08-15 21:34:25 +02:00
62e7f7f1bc
osmo-bts: Build the latest version of osmo-bts
...
This has a GSM band selection fix. GSM1900 band is now working properly.
2012-08-15 16:40:03 +02:00
d03aa9c516
osmo-bts,osmo-pcu: Both applications should be rebuild on osmocore upgrades
...
Rebuild the BTS and PCU when the SOVERSION of a libosmocore library
is changing. Do that by adding the ${META_TELEPHONY_OSMO_INC} into
the PR.
2012-08-15 16:35:58 +02:00
Harald Welte
6734e9a695
add osmo-pcu for GPRS support on sysmobts
2012-08-15 16:33:29 +02:00
Harald Welte
5928a0374a
update to firware + api version 2.4
2012-08-15 16:30:41 +02:00
4e2ab7017f
misc: Move from SSH to Git protocol for the sysmocom source
2012-08-15 08:18:53 +02:00
9416f178b1
dvnixload: Deal with UBL being gone but U-Boot is present.
...
Upgrade the dvnixload to a version that will always flash the
UBL payload to the device.
2012-07-11 14:26:51 +02:00
d838ac6e80
ubl/dvnixload: Update both ubl and dvnixload for recovery
...
The UBL allows to interrupt the NAND boot mode and switch to the
UART mode for recovery. Everyone with physical access will be able
to interrupt the boot.
2012-07-11 09:05:53 +02:00
e2ab56be8f
ubl: Initialize the UART0/UART1 on the sysmobts-v2
...
This is fixing the early printf inside u-boot.
2012-07-11 07:33:19 +02:00
e0bf4c7fea
sysmobts-calib: Build, package and make sure it is installed
...
Install the sysmobts calibration utility. task-sysmocom-bts is
installed on every bts and will now pull in the calibration utility.
The sysmobts screen needs to be stopped before this application
can run.
2012-07-10 00:17:15 +02:00
e568fa2c27
osmo-bts: The start script is using nice, depend on coreutils for that
...
Our version of busybox does not provide the nice command, use the
fullblown coreutils instead.
2012-07-09 10:28:22 +02:00
e6ec2228da
osmo-bts: Upgrade the osmo-bts version for various bugfixes
...
This is fixing the GSMTAP debug support and permanent paging.
2012-07-09 10:25:00 +02:00
9257e4b8a1
femtobts-api: Force an upgrade due some local modifications for supporting RevB hardware
2012-07-09 10:08:47 +02:00
f3f2d7149d
u-boot: Modified the configuration in regrd to boot interruption
...
Typing bts-delay will interrupt the boot and enter the command
line of the bootloader.
2012-06-15 23:42:24 +02:00
c0663ce337
osmo-bts: Upgrade the osmo-bts version for a sysmobts-v1 fix and v2 improvement
2012-06-10 20:01:12 +02:00
45580f23e8
Merge remote-tracking branch 'origin/master'
2012-06-09 23:21:53 +02:00
62ac580831
sysmobts: Upgrade to a BTS version with fixed 2bis SI scheduling
...
This is a hot fix for the 2bis case, the more generic scheduling
patch needs to be tested a bit more.
2012-06-09 23:17:07 +02:00
Harald Welte
ce6f4b0bce
update osmo-bts to recent git which adds RF ACTIVE LED support
2012-06-09 23:17:07 +02:00
Harald Welte
a79df5e650
update osmo-bts to include RF LED / rf_lock support
2012-06-02 01:08:10 +02:00
6dcaf7d614
osmo-bts: Upgrade to a version that reloads the firmware on every start
2012-05-31 14:46:57 +08:00
Harald Welte
77f660aa0d
update to sysmobts-v2 API/firmware version v2.1
2012-05-31 14:46:57 +08:00
bdbd14a8d5
u-boot: Fix the u-boot git version in our public git repository
2012-05-31 14:46:57 +08:00
Holger Hans Peter Freyther
Harald Welte
Henning Heinold
Holger Hans Peter Freyther
Holger Hans Peter Freyther
Jan Luebbe