poky script ./meta/recipes-core/udev/udev-extraconf/mount.sh is called
by systemd-udev rules every time a storage device is found, and it is
responisble to automount them. The init script waits until the device is
automounted to finish the boot process.
The mount.sh script sues "stat", and right now our busybox doesn't have
it enabled. As a result, stat is not found, the script fails, the
device is not mounted, and the init script hangs forever.
The IDU requires that udhcpc does neither touch resolv.conf nor install a
default route. Add a flag to switch off default route installation, the
resolv.conf part is already switch-off-able.
- remove file with wrong path to ifplugd
recipes-core/busybox/files/busybox-ifplugd.sh
DAEMON=/usr/bin/ifplugd vs. /usr/sbin/ifplugd
- use lambda expression for sysmobts/sysmobsc-kernel to
include busybox-ifplugd or not
- use different defconfig files between master
and dora to enable ifplugd or not
- use different interfaces files between master
and dora to enable auto stanza or not
for the dhcp interface
Fixes: SYS#868 and SYS#1535
[hfreyther: Try to pick an option less likely to break the
Dora support but allowing us to move forward. Not entirely
compile tested due IO load of the system]
* the oe udhcpc calls /usr/share/udhcpc/default.script which
calls run-parts -a "$1" /etc/udhcpc.d, so we can install
our script as 60ntp
* using /etc/default/udhcpc-ntp to have the possibility
to disable it on the target, its enabled per default
Related: SYS#1180
A lease bound/renewal could lead to the removal of a default
route set by pppd. Apply the same "dev $interface" filter that
would be used when using the "route" command.
Fixes: SYS#1163
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS was set to '-n' which means
"Exit with failure if lease cannot be immediately negotiated."
What we'd rather want is for udhcpc to continue to run until a lease can
finally obtain. Otherwise we have a race condition in case the DHCP
server is not reachable for a few seconds during system boot, and end up
having a system that is permanently without an IP address.
This fixes ORT#639