Holger Hans Peter Freyther
1e2ecae72c
linux-sysmocom: Force building a new kernel after the last commit
...
After the defconfig was changed we should build a new kernel. Bump
the PR to force a build.
2014-12-22 15:14:18 +01:00
Harald Welte
45ed0caa79
update to recent sob-odu kernel, including v3 hardware support
2014-12-18 23:55:37 +01:00
Holger Hans Peter Freyther
29294fa7d1
linux-sysmocom: Build the watchdog into the kernel
...
We want to enable the watchdog in the bootloader already and
for this to be failsafe we need to have a kernel that can boot
and get ethernet without any additional modules. Now systemd
would not be able to trigger the watchdog and the system would
reboot within 60 seconds. I am not sure how the kernel upgrade
will go and we need to try this.
Related: SYS#374
2014-11-20 17:43:24 +01:00
Holger Hans Peter Freyther
98c407d28c
linux-sysmocom: Another speculative compile/fetch fix for dizzy
...
Not specifying a branch leads to "master" being fetched. This
means we now need to specify the rightbranch. Do that depending
on what we build.
2014-11-10 09:58:03 +01:00
Holger Hans Peter Freyther
cf35573837
linux-sysmocom: Remove the branch name as it breaks on dizzy
...
IIRC the branch name is not used in edison and it breaks in
dizzy as the commit is noth within the branch.
2014-11-10 08:50:11 +01:00
Harald Welte
0f9508c924
linux for ODU: Enable second I2C bus on UEXT connector
...
.. which is needed for the light sensor daughterboard.
2014-10-24 15:05:06 +02:00
Holger Hans Peter Freyther
39a927390d
linux-sysmocom: Enable netfilter and advanced routing for the odu
...
Allow to use netfilter on the ODU.
2014-10-14 11:44:47 +02:00
Holger Hans Peter Freyther
be040d7322
linux-sysmocom: Fix the building of the kernel (or hope I do)
2014-10-07 21:30:22 +02:00
Holger Hans Peter Freyther
c9da6c1e1a
linux-sysmocom: Fix pinmux on the ODU kernel
2014-10-07 21:18:38 +02:00
Holger Hans Peter Freyther
8d296754e7
linux-sysmocom: Upgrade ODU kernel to 3.2.63
...
This has only been boot tested on the Phytec development board
and not our final system. It has not been tested with USB support
2014-09-24 12:27:44 +02:00
Daniel Willmann
930665f4b1
meta-sysmocom-bsp: Update sysmocom-odu to build wireless-tools and wifi drivers
2014-09-08 18:33:01 +02:00
Holger Hans Peter Freyther
e7fadd8e8e
linux-sysmocom: Enable the tun device in the odu config
2014-07-18 09:58:42 +02:00
Henning Heinold
1a819714c8
linux-sysmocom: odu kernel needs CONFIG_USB_ACM
...
Related: SYS#294
2014-07-02 22:53:58 +02:00
Holger Hans Peter Freyther
eadc4c5278
linux-sysmocom: Build 3.2.0 with patches for the ODU
...
The 3.2.XX kernel doesn't really work. Please see SYS#409
for details and resolution
2014-06-21 10:08:11 +02:00
Holger Hans Peter Freyther
ccf7536405
linux-sysmocom: Build newer kernel for the ODU kernel
...
Partially Fixes: SYS#294
2014-06-09 19:46:50 +02:00
Holger Hans Peter Freyther
f3117eaa22
linux-sysmocom: Enable mtdparts handling for the sysmobts-v2
...
We will change the MTD partitioning for our devices soon. The
kernel needs to honor the cmdline given by the kernel for that.
The rootfs will move a few pages to the back with newer bootloaders.
2014-05-19 19:13:47 +02:00
Holger Hans Peter Freyther
f23a2cbd9a
sysmocom-odu: Fix the u-boot and linux recipe
...
While the kernel resides in a dedicated kernel partition we will
still install the uImage. For u-boot we just want it to be installed.
2014-03-29 10:50:04 +01:00
Holger Hans Peter Freyther
a4ff48fc44
linux: Add support for the sob-odu device
...
This currently requires the meta-ti layer but we will make sure
that nothing from it will be required in the end. The kernel is
based on linux-3.2 as this is the "default" TI kernel that supports
the SGX (not that we care)
2014-02-26 15:36:09 +01:00
Henning Heinold
f5badb8b9e
linux-sysmocom: workaround for edison, which derives git${SRCPV} from local bb_persist_data
2013-12-03 18:00:51 +01:00
Henning Heinold
ccd50b5dbe
linux-sysmocom: split to v3.10 and v3.2
...
* The Linux 3.2.X kernel has some funny issues with GCC 4.8 in the
fs/namei.c look up code. It is easier to move to 3.10 than to fully
debug the issue.
* disable the mISDN loop patch for v3.10
* use the hack to make v3.2 compilable for edison and v3.10 for dora
2013-11-27 12:25:01 +01:00