UBL is setting up the flash timings (A1CR) and so far U-Boot
was overwriting it with a timing for the EVB development board
of TI. Let UBL define ECC/ChipSelect and the A1CR timings.
This might now cause different kind of flash issues because the
per chip timings might be "wrong". This is why this commit should
needs to stay in testing a bit longer. We should use this commit
on RevC, D, E and F hardware ourselves a bit.
I didn't know that u-boot was creating a package and installing
the bin into /boot. The detection of the file seems to have
changed and a new QA error comes up.
ERROR: u-boot-v2011.12+gitAUTOINC+f6453a3911-r0 do_package: QA Issue: split_and_strip_files: 'file /home/oebuilds/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/sysmobts_v2-poky-linux-gnueabi/u-boot/v2011.12+gitAUTOINC+f6453a3911-r0/package/boot/u-boot-sysmobts-v2-v2011.12+gitAUTOINC+f6453a3911-r0' failed [split-strip]
This seems to have been introduced by changing the LC_ALL to
en_US.UTF-8. I have started a dialogue with upstream development
but as we do not need a u-boot package, let's just remove the
files.
ERROR: image-rauc-ubi-1.0-r0 do_populate_lic: QA Issue: image-rauc-ubi: Recipe file does not have license file information (LIC_FILES_CHKSUM) [license-checksum]
This glib-2.0 version was required by rauc and should have been
placed in the recipes-extra (or recipes-fixes) directory.
Yocto master has imported gobject-introspecition and this requires
a newer version of glib-2.0. For Yocto master this recipe has
replaced the newer one. By moving it to the yocto-dora directory
we continue to use the old version on dora and the default version
on master.
Disabling the new "binfmt" doesn't work and breaks the build. I have
sent an email to the mailinglist and this might be fixed but at the
same time binfmt is split into a new package anyway. At the same time
we should enable some items we have now switched off. Once we start
to use/stabilize this build we need to check what we need and what the
cost is.
Yocto is now using iproute2 4.4 and the tools we packaged into
the main package are now available as extra packages and we can
just drop our extension for master.
libexecdir is now a dedicated directory and empty in our ntpd
build. Avoid QA issue of an empty directory not belonging to
anyone. Clean it if it is empty
Exception: OSError: [Errno 36] File name too long: '/home/oebuilds/jenkins/workspace/Yocto-Master/label/OE/build/tmp/deploy/sources/allarch-poky-linux/Firmware-AbilisFirmware-agereFirmware-amd-ucodeFirmware-atheros_firmwareFirmware-broadcom_bcm43xxFirmware-ca0132Firmware-chelsio_firmwareFirmware-cw1200Firmware-dib0700Firmware-ene_firmwareFirmware-fw_sst_0f28Firmware-go7007Firmware-i2400mFirmware-ibt_firmwareFirmware-it913xFirmware-iwlwifi_firmwareFirmware-IntcSST2Firmware-MarvellFirmware-mwl8335Firmware-myri10ge_firmwareFirmware-OLPCFirmware-phanfwFirmware-qat_dh895xcc_firmwareFirmware-qla2xxxFirmware-r8a779x_usb3Firmware-radeonFirmware-ralink_a_mediatek_company_firmwareFirmware-ralink-firmwareFirmware-rtlwifi_firmwareFirmware-tda7706-firmwareFirmware-ti-connectivityFirmware-ueagle-atm4-firmwareFirmware-via_vt6656Firmware-wl1251Firmware-xc4000Firmware-xc5000Firmware-xc5000cFirmware-sianoFirmware-qualcommAthos_ar3kFirmware-qualcommAthos_ath10k'
Our initramfs images are supposed to be small and don't have a
/etc/opkg folder so attempting to put feed config in there will
fail. Reset the FEED_URIS that come from our local.conf.
When restoring the backup the rootfs is mounted in /rootfs/data
and the symlink to the real file would then not work. Attempt to
change the directory first to get a relative symlink.
Untested change and needed for rauc
The configuration scripts are named for the systemd units for which they
generate configuration files. The generator causes them to run before
those units are started.
* the ntpdate cron job turned into
a shell script which now checks
for running timeserver before
updating the time via ntpdate
* install the cron stanza to the
cron.d directory like serval
other packages does
* comment the entry in the old
crontab file when found
Fixes: SYS#1841
Harald Welte
Holger Hans Peter Freyther
Jan Luebbe
Henning Heinold