Holger Hans Peter Freyther
b3c600a368
sysmobts: Fix up the targeting of the 3.10.40 kernel
2014-05-18 10:47:57 +02:00
Holger Hans Peter Freyther
bb18e3152b
linux-sysmocom: Rebae and target latest stable version
2014-05-16 14:19:25 +02:00
Holger Hans Peter Freyther
3213964e17
linux-sysmocom: Enable SMP support for sysmocom-bsc
...
The new sysmocomNITB product is using a SMP capable system that
is needed for some more transcoding power. Enable SMP in the
kernel.
2014-05-16 14:18:55 +02:00
Holger Hans Peter Freyther
6f02ca5575
sysmocom-bsc: Run olddefconfig on a 3.10.40 kernel
2014-05-16 14:16:22 +02:00
Holger Hans Peter Freyther
7aeb916ea1
sysmocom-backup: Backup a new opkg config file for starterkits
...
We make the configuration packages for starterkit customers
available in a feed. Backup this feed configuration.
Fixes: SYS#365
2014-05-16 11:51:44 +02:00
Henning Heinold
d88a758c4e
sysmocom-backup: add the systemd-files for bsc, nitb and sgsn to backup when enabled
...
Fixes: SYS#261
2014-04-29 20:11:13 +02:00
Henning Heinold
22cb9fef1d
init-install.sh: do not rename the network devices after the new kernel/udev scheme
...
Fixes: SYS#75
2014-04-29 16:52:13 +02:00
Henning Heinold
1638def65e
sysmocom-bsc-image: add kernel-module-nls-iso8859-1 and kernel-module-nls-cp437 and disable LINGUAS
...
Fixes: SYS#75
2014-04-29 16:52:04 +02:00
Holger Hans Peter Freyther
8ac540640d
osmo-bts: Upgrade osmo-bts to fix a stupid handover issue
2014-04-19 19:38:35 +02:00
Holger Hans Peter Freyther
b0fa1e06d6
Merge remote-tracking branch 'hheinold/bsc-grub-image-install'
...
These provide us with a nice way to provision/install the BSCs
with grub. This way we can easily upgrade the kernel on the BSC
as well. It is a fix for SYS#75.
2014-04-08 18:09:29 +02:00
Henning Heinold
076f6e1bb0
init-install.sh: resize the install partition
2014-04-08 18:06:51 +02:00
Henning Heinold
45929766a9
core-image-minimal-initramfs: append the image to install charset deps for the vfat kernel modul
2014-04-08 18:06:51 +02:00
Henning Heinold
4433c53b76
initramfs: modify init-install to install our bsc image
...
Fixes: partly SYS#75
2014-04-08 18:06:27 +02:00
Holger Hans Peter Freyther
8f46ba7045
busybox: Enable dnsd on all the builds
...
Specially for the sysmobsc it can come in handy to have a DNS
server that will return some static addresses.
2014-04-04 13:09:05 +02:00
Henning Heinold
e06fa2ac4d
linux-sysmocom/sysmocom-bsc: enable EHCI_HCD to get USB 2.0 support
2014-04-01 19:19:48 +02:00
Holger Hans Peter Freyther
475b32b3fe
u-boot: Fix the deployment of symlinks and install SPL/MLO
2014-03-29 13:20:00 +01:00
Holger Hans Peter Freyther
6b4cc713b6
linux-sysmocom: Enable CGROUPS for the sysmocom-odu
2014-03-29 11:27:53 +01:00
Holger Hans Peter Freyther
f23a2cbd9a
sysmocom-odu: Fix the u-boot and linux recipe
...
While the kernel resides in a dedicated kernel partition we will
still install the uImage. For u-boot we just want it to be installed.
2014-03-29 10:50:04 +01:00
Holger Hans Peter Freyther
4b1f68ae33
cifs-utils: Move it to the extras like the other extras
2014-03-29 00:17:17 +01:00
Holger Hans Peter Freyther
e2853d21b5
cifs-utils: Add recipe based on the 5.x recipe of meta-networking
2014-03-28 22:32:35 +01:00
Holger Hans Peter Freyther
d9ebe05799
u-boot: Add something that could build for the sysmocom-odu
...
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
2014-03-28 21:56:27 +01:00
Holger Hans Peter Freyther
2700d6a642
u-boot: Start to use spaces instead of tabs to follow OE
2014-03-28 21:55:45 +01:00
Holger Hans Peter Freyther
5e84042d37
u-boot: Use PV/PR again as PKGV/PKGR didn't fix the AUTOINC in the filename
2014-03-28 21:55:04 +01:00
Holger Hans Peter Freyther
b008109769
linux-sysmocom: We require bc-native for kernel compilation now
2014-03-28 21:36:34 +01:00
Holger Hans Peter Freyther
575be79d5a
osmo-bts: Fix the AGCH through PCU socket message
2014-03-27 18:13:21 +01:00
Holger Hans Peter Freyther
318f4e4e52
osmo-bts: Update with max_power_red fixes and apply it
...
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
2014-03-27 07:57:45 +01:00
Henning Heinold
c5e607febc
sysmocom-bsc-ip-image-directdisk: do not rename the ethernet interfaces to the new scheme
...
Fixes: SYS#277
2014-03-23 23:08:30 +01:00
Holger Hans Peter Freyther
c872ce4a46
osmo-bts: Provide the direct PCU mode for the image
2014-03-21 19:28:59 +01:00
Holger Hans Peter Freyther
599e2d3679
systemd: Update osmo-bts/osmo-pcu recipes for newer service files
...
Some smaller other fixes in the osmo-pcu code
2014-03-21 19:13:23 +01:00
Holger Hans Peter Freyther
5b1ebe6a26
linux-sysmocom: Local hacks to have NAT/MASQ on 3.2 and 3.10 kernels
...
The name/structure of the NAT configuration was changed. Catch up
and put the new names into the old defconfig too. It is an ugly hack
to have it work with v3.2 and v3.10 kernels. The sysmobsc has been
fixed independently.
2014-03-21 19:13:23 +01:00
Holger Hans Peter Freyther
e797a8ac6b
sysmobts-firmware: Make the firmware conflict with older bts software
...
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
2014-03-21 16:52:30 +01:00
Holger Hans Peter Freyther
7c453471f1
osmo-pcu: Bump version number and requirements as well
...
The interface has not knowingly changed but it is good to
have comparable versions installed.
2014-03-21 16:52:30 +01:00
Holger Hans Peter Freyther
9ae58a33bf
osmo-bts: Upgrade the version number to 0.4.0
2014-03-21 16:52:29 +01:00
Holger Hans Peter Freyther
1b769147bd
sysmocom-odu: We want things to be packaed as uImage (do we?)
2014-03-13 17:08:17 +01:00
Holger Hans Peter Freyther
46098bb42e
osmo-pcu: Re-build with some cosmetic and logging changes
...
Make finding use after free more easy and change some log
regions to help in detecting what is going on.
2014-03-13 17:08:11 +01:00
Holger Hans Peter Freyther
ce642cba53
osmo-bts: Build newer version with handover, agch and manager changes
2014-03-13 17:08:08 +01:00
Holger Hans Peter Freyther
2ba19d8e54
femtobts-api: Build the latest git of the header files
2014-03-13 16:48:03 +01:00
Holger Hans Peter Freyther
2fa4a818c7
Merge branch 'hheinold/systemd-images'
2014-03-11 18:34:52 +01:00
Henning Heinold
36d4e0119a
sysmocom-bsc-image: enable osmo-bsc for sysvinit or systemd
2014-03-11 18:34:43 +01:00
Henning Heinold
72ce4c5203
sysmocom-nitb-image: enable nitb for sysvinit or systemd
2014-03-11 18:34:43 +01:00
Henning Heinold
4a9cc7acdb
systemd_sysmocom.inc: disable flushing of journald too
...
* bump INC_PR
Fixes: SYS#262
2014-03-11 18:30:55 +01:00
Holger Hans Peter Freyther
305426f7cf
Merge remote-tracking branch 'hheinold/dora-kernel-bsc-upgrade'
2014-03-11 18:30:04 +01:00
Henning Heinold
6f469116e1
sysmocom-bsc-ip-image-directdisk: switch from ext3 to ext4 filesystem
2014-03-11 18:17:51 +01:00
Henning Heinold
b2a5a3a316
sysmocom-bsc: switch to kernelprovider to linux-sysmocom for dora
...
* use seperate defconfig, because of option changed from 2.6.39 to 3.10
* use python magic to switch between linux and linux-sysmocom
* add sysmocom-bsc to compatible machines for linux-sysmocom
* add new confiugration parameters for syslinux
2014-03-11 18:17:36 +01:00
Henning Heinold
98cf4f54f5
tune-geode: fix syntax for dora
2014-03-06 23:26:41 +01:00
Holger Hans Peter Freyther
a4ff48fc44
linux: Add support for the sob-odu device
...
This currently requires the meta-ti layer but we will make sure
that nothing from it will be required in the end. The kernel is
based on linux-3.2 as this is the "default" TI kernel that supports
the SGX (not that we care)
2014-02-26 15:36:09 +01:00
Holger Hans Peter Freyther
a21e9eef6b
osmo-bts: Bump the OpenBSC sha1 to see if that forces the upgrade
2014-02-21 09:25:01 +01:00
Holger Hans Peter Freyther
2435a67b1a
osmo-bts: Update the revision number of the osmobts
2014-02-21 09:19:48 +01:00
Holger Hans Peter Freyther
926d082a27
osmo-bts: Update to the handover code
2014-02-20 18:23:34 +01:00
Henning Heinold
d1c958be3e
bts2050-util: use INSANE_SKIP so bitbake does not error out
2014-02-05 16:11:34 +01:00