Holger Hans Peter Freyther
da3cf64f1e
u-boot: Remove the never working ODU support from u-boot
...
The u-boot port was never tried on a device and was only added
to get the image building. Remove now that we have barebox support
2014-07-11 18:59:24 +02:00
Holger Hans Peter Freyther
f18a674af3
barebox: Build a version of barebox for the ODU
...
Build a version of barebox that has support for NAND flash and
ubifs. Load the kernel from the device. One needs to flash the
*mlo*.img into the xloader partitions and the other image into
the barebox partition.
erase /dev/nand0.xload.bb
erase /dev/nand0.xload_backup1.bb
erase /dev/nand0.xload_backup2.bb
erase /dev/nand0.xload_backup3.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup1.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup2.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup3.bb
2014-07-11 18:53:23 +02:00
Holger Hans Peter Freyther
7aa38f0755
uboot/ubl: Build newer version for toshiba flash
...
Build newer version for the toshiba flash. Setting A1CR in the
emif has been moved to ubl and depends on the NAND chip that is
being used.
2014-07-11 12:18:38 +02:00
Holger Hans Peter Freyther
bf0c0ad287
Revert "osmo-bts: Depend on a specific version of the sysmobts-firmware"
...
This doesn't work like this. We need to know the _exact_ PV/PR
of the package and we don't. Specially with the PR server in dora
and later we can not know the version.
This reverts commit 767d7b6939
.
2014-06-22 10:30:10 +02:00
Holger Hans Peter Freyther
767d7b6939
osmo-bts: Depend on a specific version of the sysmobts-firmware
2014-06-20 18:57:55 +02:00
Holger Hans Peter Freyther
85bc905db3
osmo-pcu: Avoid crash with BFI indication of the DSP?
...
Add the hotfix to not crash on a bad frame received.
2014-06-16 21:52:52 +02:00
Holger Hans Peter Freyther
f8960b7bf2
osmo-bts: Do not mention the osmobts-mgr.cfg in the conf files
...
While the package can be built on dora, it can not be built on
edison. We need to comment it.
2014-06-16 20:52:39 +02:00
Holger Hans Peter Freyther
dfe8845a4e
osmo-pcu: Upgrade to a newer test version of the PCU
...
* "upgrade" a TBF that was assigned through the BCCH
* Rip-out the non exit code from the PCU.
2014-06-16 19:40:39 +02:00
Holger Hans Peter Freyther
ff29b31d6e
sysmobts: Upgrade firmware headers, firmware and the osmo-bts code
...
This upgrades the firmware from 3.6 to 3.10. This is a significant
firmware upgrade and it changed ABIs too. Try hard to fix the
dependencies as much as possible. This requires the DSP headers
files to be of version 3.10 as well but we can not have versioned
DEPENDS.
2014-06-16 19:27:42 +02:00
Holger Hans Peter Freyther
ea7e222c7b
osmo-bts: Revert all sysmobgs-mgr related options
...
The code has not been finished and doesn't meet the quality
standards we have for a product. Comment the sysmobts-mgr
related files that will be back soon.
2014-06-16 18:36:47 +02:00
Holger Hans Peter Freyther
70bfea442d
osmo-bts: Apply the sysmobts-mgr hotfix onto the last version
...
I take the most conversative route and apply the single sysmobts-mgr
patch to get a working "ipaccess-find" again.
2014-06-01 12:12:31 +02:00
Holger Hans Peter Freyther
9fd7612abd
ubl/u-boot: Upgrade for NAND redundancy patches
...
Let's flash multiple copies of UBL and U-Boot to cope better with
NAND bits flipping in these sectors. To fit multiple copies of
U-Boot into the flash we had to move the rootfs a bit to the end.
2014-05-23 09:04:25 +02:00
Holger Hans Peter Freyther
3fbe647e14
osmo-bts: Fix the CONFFILES_${PN} introduced recently
...
Daniel noticed that on upgrade his /etc/osmocom/osmo-bts.cfg
was overwritten. This was due the addition of the sysmobts-mgr
config file and using an assignment instead of an append.
2014-05-21 17:59:02 +02:00
Harald Welte
f9697c1e24
osmo-bts: update git to call osmobts-mgr with config file
2014-05-19 13:04:11 +02:00
Harald Welte
6dbc14b02c
osmo-bts: Make sure to install osmobts-mgr.cfg
2014-05-19 12:59:32 +02:00
Harald Welte
30caceef90
osmo-bts: Update to current master for CMR in AMR support
2014-05-19 11:39:52 +02:00
Holger Hans Peter Freyther
8ac540640d
osmo-bts: Upgrade osmo-bts to fix a stupid handover issue
2014-04-19 19:38:35 +02:00
Holger Hans Peter Freyther
475b32b3fe
u-boot: Fix the deployment of symlinks and install SPL/MLO
2014-03-29 13:20:00 +01:00
Holger Hans Peter Freyther
f23a2cbd9a
sysmocom-odu: Fix the u-boot and linux recipe
...
While the kernel resides in a dedicated kernel partition we will
still install the uImage. For u-boot we just want it to be installed.
2014-03-29 10:50:04 +01:00
Holger Hans Peter Freyther
d9ebe05799
u-boot: Add something that could build for the sysmocom-odu
...
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
2014-03-28 21:56:27 +01:00
Holger Hans Peter Freyther
2700d6a642
u-boot: Start to use spaces instead of tabs to follow OE
2014-03-28 21:55:45 +01:00
Holger Hans Peter Freyther
5e84042d37
u-boot: Use PV/PR again as PKGV/PKGR didn't fix the AUTOINC in the filename
2014-03-28 21:55:04 +01:00
Holger Hans Peter Freyther
575be79d5a
osmo-bts: Fix the AGCH through PCU socket message
2014-03-27 18:13:21 +01:00
Holger Hans Peter Freyther
318f4e4e52
osmo-bts: Update with max_power_red fixes and apply it
...
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
2014-03-27 07:57:45 +01:00
Holger Hans Peter Freyther
c872ce4a46
osmo-bts: Provide the direct PCU mode for the image
2014-03-21 19:28:59 +01:00
Holger Hans Peter Freyther
599e2d3679
systemd: Update osmo-bts/osmo-pcu recipes for newer service files
...
Some smaller other fixes in the osmo-pcu code
2014-03-21 19:13:23 +01:00
Holger Hans Peter Freyther
e797a8ac6b
sysmobts-firmware: Make the firmware conflict with older bts software
...
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
2014-03-21 16:52:30 +01:00
Holger Hans Peter Freyther
7c453471f1
osmo-pcu: Bump version number and requirements as well
...
The interface has not knowingly changed but it is good to
have comparable versions installed.
2014-03-21 16:52:30 +01:00
Holger Hans Peter Freyther
9ae58a33bf
osmo-bts: Upgrade the version number to 0.4.0
2014-03-21 16:52:29 +01:00
Holger Hans Peter Freyther
46098bb42e
osmo-pcu: Re-build with some cosmetic and logging changes
...
Make finding use after free more easy and change some log
regions to help in detecting what is going on.
2014-03-13 17:08:11 +01:00
Holger Hans Peter Freyther
ce642cba53
osmo-bts: Build newer version with handover, agch and manager changes
2014-03-13 17:08:08 +01:00
Holger Hans Peter Freyther
2ba19d8e54
femtobts-api: Build the latest git of the header files
2014-03-13 16:48:03 +01:00
Holger Hans Peter Freyther
a21e9eef6b
osmo-bts: Bump the OpenBSC sha1 to see if that forces the upgrade
2014-02-21 09:25:01 +01:00
Holger Hans Peter Freyther
2435a67b1a
osmo-bts: Update the revision number of the osmobts
2014-02-21 09:19:48 +01:00
Holger Hans Peter Freyther
926d082a27
osmo-bts: Update to the handover code
2014-02-20 18:23:34 +01:00
Henning Heinold
d1c958be3e
bts2050-util: use INSANE_SKIP so bitbake does not error out
2014-02-05 16:11:34 +01:00
Holger Hans Peter Freyther
5aa0de1de3
osmo-bts: Upgrade to master and install the sysmobts-mgr.service
2014-02-04 13:41:45 +01:00
Holger Hans Peter Freyther
9b3893f4c1
osmo-bts: Build a new version with a crash fix on init
2014-01-23 17:21:27 +01:00
Harald Welte
bb35f69066
osmo-bts: Build latest version with fMaxTxPower fix
...
As a side note, this also introduces sysmobts-mgr
2014-01-22 02:02:10 +01:00
Holger Hans Peter Freyther
00a590e063
dvnixload: Update with the new toolchain name in place
2014-01-20 11:41:43 +01:00
Holger Hans Peter Freyther
c47bdcd180
osmo-bts: This requires a newer version of OpenBSC as well
2014-01-20 11:36:25 +01:00
Holger Hans Peter Freyther
933b68b3e8
osmo-bts: Build latest version of osmo-bts with performance changes
2014-01-20 11:24:21 +01:00
Holger Hans Peter Freyther
5227148e4a
osmo-pcu: Build the latest sysmocom/master code
2014-01-20 11:10:52 +01:00
Holger Hans Peter Freyther
27f0ed2dc5
osmo-pcu: Update to the latest sysmocom/master version as of today
2014-01-08 10:59:55 +01:00
Henning Heinold
d6572a4b3c
osmo-pcu: add systemd support
...
The systemd-service-file was added to sysmocom/master branch so use that.
2014-01-08 10:59:19 +01:00
Holger Hans Peter Freyther
6ed3f9adf5
osmo-pcu: Build my latest testing version of the PCU
2013-12-03 15:38:58 +01:00
Holger Hans Peter Freyther
ad936987cc
ubl/u-boot: Use PKGV and PKGR instead of PV/PR for the AUTOINC
...
This should help in having no AUTOINC inside the uboot filename
but it doesn't fix it yet.
2013-11-27 12:25:01 +01:00
Holger Hans Peter Freyther
fc071607d1
osmo-bts: Package the sysmobts.service for systemd support
...
Use the native systemd service file to avoid running a shell script
that is ran from within the screen. This code expects the pcu to have
a .service file itself.
2013-11-27 12:23:49 +01:00
Holger Hans Peter Freyther
a3c2a2b55c
osmo-pcu: Update the PCU to the latest commit in my cleanup branch
2013-11-05 10:23:10 +01:00
Harald Welte
a349ce5879
update sysmobts/osmo-bts to b2a8a642d65779918f64437b5cbbde8e206222f2
...
this will add support for transmitting at higher power (model 2050)
as well as restricting the unit to use within those bands indicated
in the EEPROM.
2013-10-09 23:56:36 +02:00