meta-sysmocom-bsp/recipes-bsp/init-ifupdown/init-ifupdown/sysmocom-idu/interfaces

48 lines
1.1 KiB
Plaintext

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
# eth0 is attached to the IDU-internal managed switch
# in the future we will use VLANs to use individual switch ports as
# break-out interfaces. For now we simply do DHCP.
iface eth0 inet dhcp
#eth1 is our admin interface and will provide dhcp to clients
auto eth1
iface eth1 inet static
address 172.16.6.1
netmask 255.255.255.0
network 172.16.6.0
# eth2 is attached to the IDU-internal SOB-JB02-SW
auto eth2
iface eth2 inet manual
pre-up ifconfig $IFACE up
pre-down ifconfig $IFACE down
# * br0 is a bridge interface on top of eth2
# * we use the bridging code so we can run mstpd and become the root bridge
auto br0
iface br0 inet static
bridge_ports eth2
bridge_maxwait 0
address 172.16.4.1
netmask 255.255.254.0
network 172.16.4.0
# VLAN 6: management VLAN
auto br0.6
iface br0.6 inet static
address 172.16.2.1
netmask 255.255.254.0
network 172.16.2.0
# 172.16.1.1 is the service IP address for SOBMGMT
auto br0.6:0
iface br0.6:0 inet static
address 172.16.1.1
netmask 255.255.255.255