u-boot/drivers/video/sm501.c

241 lines
5.7 KiB
C
Raw Normal View History

/*
* (C) Copyright 2002
* St<EFBFBD>ubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* (C) Copyright 2005
* Martin Krause TQ-Systems GmbH martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Basic video support for SMI SM501 "Voyager" graphic controller
*/
#include <common.h>
#include <asm/io.h>
#include <video_fb.h>
#include <sm501.h>
#define read8(ptrReg) \
*(volatile unsigned char *)(sm501.isaBase + ptrReg)
#define write8(ptrReg,value) \
*(volatile unsigned char *)(sm501.isaBase + ptrReg) = value
#define read16(ptrReg) \
(*(volatile unsigned short *)(sm501.isaBase + ptrReg))
#define write16(ptrReg,value) \
(*(volatile unsigned short *)(sm501.isaBase + ptrReg) = value)
#define read32(ptrReg) \
(*(volatile unsigned int *)(sm501.isaBase + ptrReg))
#define write32(ptrReg, value) \
(*(volatile unsigned int *)(sm501.isaBase + ptrReg) = value)
GraphicDevice sm501;
void write_be32(int off, unsigned int val)
{
out_be32((unsigned __iomem *)(sm501.isaBase + off), val);
}
void write_le32(int off, unsigned int val)
{
out_le32((unsigned __iomem *)(sm501.isaBase + off), val);
}
void (*write_reg32)(int off, unsigned int val) = write_be32;
/*-----------------------------------------------------------------------------
* SmiSetRegs --
*-----------------------------------------------------------------------------
*/
static void SmiSetRegs (void)
{
/*
* The content of the chipset register depends on the board (clocks,
* ...)
*/
const SMI_REGS *preg = board_get_regs ();
while (preg->Index) {
write_reg32 (preg->Index, preg->Value);
/*
* Insert a delay between
*/
udelay (1000);
preg ++;
}
}
#ifdef CONFIG_VIDEO_SM501_PCI
static struct pci_device_id sm501_pci_tbl[] = {
{ PCI_VENDOR_ID_SMI, PCI_DEVICE_ID_SMI_501 },
{}
};
#endif
/*
* We do not enforce board code to provide empty/unused
* functions for this driver and define weak default
* functions here.
*/
unsigned int __board_video_init (void)
{
return 0;
}
unsigned int board_video_init (void)
__attribute__((weak, alias("__board_video_init")));
unsigned int __board_video_get_fb (void)
{
return 0;
}
unsigned int board_video_get_fb (void)
__attribute__((weak, alias("__board_video_get_fb")));
void __board_validate_screen (unsigned int base)
{
}
void board_validate_screen (unsigned int base)
__attribute__((weak, alias("__board_validate_screen")));
/*-----------------------------------------------------------------------------
* video_hw_init --
*-----------------------------------------------------------------------------
*/
void *video_hw_init (void)
{
#ifdef CONFIG_VIDEO_SM501_PCI
unsigned int pci_mem_base, pci_mmio_base;
unsigned int id;
unsigned short device_id;
pci_dev_t devbusfn;
int mem;
#endif
unsigned int *vm, i;
memset (&sm501, 0, sizeof (GraphicDevice));
#ifdef CONFIG_VIDEO_SM501_PCI
printf("Video: ");
/* Look for SM501/SM502 chips */
devbusfn = pci_find_devices(sm501_pci_tbl, 0);
if (devbusfn < 0) {
printf ("PCI Controller not found.\n");
goto not_pci;
}
/* Setup */
pci_write_config_dword (devbusfn, PCI_COMMAND,
(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
pci_read_config_word (devbusfn, PCI_DEVICE_ID, &device_id);
pci_read_config_dword (devbusfn, PCI_REVISION_ID, &id);
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &pci_mem_base);
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_1, &pci_mmio_base);
sm501.frameAdrs = pci_mem_to_phys (devbusfn, pci_mem_base);
sm501.isaBase = pci_mem_to_phys (devbusfn, pci_mmio_base);
if (sm501.isaBase)
write_reg32 = write_le32;
mem = in_le32 ((unsigned __iomem *)(sm501.isaBase + 0x10));
mem = (mem & 0x0000e000) >> 13;
switch (mem) {
case 1:
mem = 8;
break;
case 2:
mem = 16;
break;
case 3:
mem = 32;
break;
case 4:
mem = 64;
break;
case 5:
mem = 2;
break;
case 0:
default:
mem = 4;
}
printf ("PCI SM50%d %d MB\n", ((id & 0xff) == 0xC0) ? 2 : 1, mem);
not_pci:
#endif
/*
* Initialization of the access to the graphic chipset Retreive base
* address of the chipset (see board/RPXClassic/eccx.c)
*/
if (!sm501.isaBase) {
sm501.isaBase = board_video_init ();
if (!sm501.isaBase)
return NULL;
}
if (!sm501.frameAdrs) {
sm501.frameAdrs = board_video_get_fb ();
if (!sm501.frameAdrs)
return NULL;
}
sm501.winSizeX = board_get_width ();
sm501.winSizeY = board_get_height ();
#if defined(CONFIG_VIDEO_SM501_8BPP)
sm501.gdfIndex = GDF__8BIT_INDEX;
sm501.gdfBytesPP = 1;
#elif defined(CONFIG_VIDEO_SM501_16BPP)
sm501.gdfIndex = GDF_16BIT_565RGB;
sm501.gdfBytesPP = 2;
#elif defined(CONFIG_VIDEO_SM501_32BPP)
sm501.gdfIndex = GDF_32BIT_X888RGB;
sm501.gdfBytesPP = 4;
#else
#error Unsupported SM501 BPP
#endif
sm501.memSize = sm501.winSizeX * sm501.winSizeY * sm501.gdfBytesPP;
/* Load Smi registers */
SmiSetRegs ();
/* (see board/RPXClassic/RPXClassic.c) */
board_validate_screen (sm501.isaBase);
/* Clear video memory */
i = sm501.memSize/4;
vm = (unsigned int *)sm501.frameAdrs;
while(i--)
*vm++ = 0;
return (&sm501);
}