u-boot/drivers/block/dwc_ahsata.c

971 lines
23 KiB
C
Raw Normal View History

/*
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
* Terry Lv <r65388@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <libata.h>
#include <ahci.h>
#include <fis.h>
#include <sata.h>
#include <common.h>
#include <malloc.h>
#include <linux/ctype.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <asm/arch/clock.h>
#include "dwc_ahsata.h"
struct sata_port_regs {
u32 clb;
u32 clbu;
u32 fb;
u32 fbu;
u32 is;
u32 ie;
u32 cmd;
u32 res1[1];
u32 tfd;
u32 sig;
u32 ssts;
u32 sctl;
u32 serr;
u32 sact;
u32 ci;
u32 sntf;
u32 res2[1];
u32 dmacr;
u32 res3[1];
u32 phycr;
u32 physr;
};
struct sata_host_regs {
u32 cap;
u32 ghc;
u32 is;
u32 pi;
u32 vs;
u32 ccc_ctl;
u32 ccc_ports;
u32 res1[2];
u32 cap2;
u32 res2[30];
u32 bistafr;
u32 bistcr;
u32 bistfctr;
u32 bistsr;
u32 bistdecr;
u32 res3[2];
u32 oobr;
u32 res4[8];
u32 timer1ms;
u32 res5[1];
u32 gparam1r;
u32 gparam2r;
u32 pparamr;
u32 testr;
u32 versionr;
u32 idr;
};
#define MAX_DATA_BYTES_PER_SG (4 * 1024 * 1024)
#define MAX_BYTES_PER_TRANS (AHCI_MAX_SG * MAX_DATA_BYTES_PER_SG)
#define writel_with_flush(a, b) do { writel(a, b); readl(b); } while (0)
static int is_ready;
static inline u32 ahci_port_base(u32 base, u32 port)
{
return base + 0x100 + (port * 0x80);
}
static int waiting_for_cmd_completed(u8 *offset,
int timeout_msec,
u32 sign)
{
int i;
u32 status;
for (i = 0;
((status = readl(offset)) & sign) && i < timeout_msec;
++i)
mdelay(1);
return (i < timeout_msec) ? 0 : -1;
}
static int ahci_setup_oobr(struct ahci_probe_ent *probe_ent,
int clk)
{
struct sata_host_regs *host_mmio =
(struct sata_host_regs *)probe_ent->mmio_base;
writel(SATA_HOST_OOBR_WE, &(host_mmio->oobr));
writel(0x02060b14, &(host_mmio->oobr));
return 0;
}
static int ahci_host_init(struct ahci_probe_ent *probe_ent)
{
u32 tmp, cap_save, num_ports;
int i, j, timeout = 1000;
struct sata_port_regs *port_mmio = NULL;
struct sata_host_regs *host_mmio =
(struct sata_host_regs *)probe_ent->mmio_base;
int clk = mxc_get_clock(MXC_SATA_CLK);
cap_save = readl(&(host_mmio->cap));
cap_save |= SATA_HOST_CAP_SSS;
/* global controller reset */
tmp = readl(&(host_mmio->ghc));
if ((tmp & SATA_HOST_GHC_HR) == 0)
writel_with_flush(tmp | SATA_HOST_GHC_HR, &(host_mmio->ghc));
while ((readl(&(host_mmio->ghc)) & SATA_HOST_GHC_HR)
&& --timeout)
;
if (timeout <= 0) {
debug("controller reset failed (0x%x)\n", tmp);
return -1;
}
/* Set timer 1ms */
writel(clk / 1000, &(host_mmio->timer1ms));
ahci_setup_oobr(probe_ent, 0);
writel_with_flush(SATA_HOST_GHC_AE, &(host_mmio->ghc));
writel(cap_save, &(host_mmio->cap));
num_ports = (cap_save & SATA_HOST_CAP_NP_MASK) + 1;
writel_with_flush((1 << num_ports) - 1,
&(host_mmio->pi));
/*
* Determine which Ports are implemented by the DWC_ahsata,
* by reading the PI register. This bit map value aids the
* software to determine how many Ports are available and
* which Port registers need to be initialized.
*/
probe_ent->cap = readl(&(host_mmio->cap));
probe_ent->port_map = readl(&(host_mmio->pi));
/* Determine how many command slots the HBA supports */
probe_ent->n_ports =
(probe_ent->cap & SATA_HOST_CAP_NP_MASK) + 1;
debug("cap 0x%x port_map 0x%x n_ports %d\n",
probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
for (i = 0; i < probe_ent->n_ports; i++) {
probe_ent->port[i].port_mmio =
ahci_port_base((u32)host_mmio, i);
port_mmio =
(struct sata_port_regs *)probe_ent->port[i].port_mmio;
/* Ensure that the DWC_ahsata is in idle state */
tmp = readl(&(port_mmio->cmd));
/*
* When P#CMD.ST, P#CMD.CR, P#CMD.FRE and P#CMD.FR
* are all cleared, the Port is in an idle state.
*/
if (tmp & (SATA_PORT_CMD_CR | SATA_PORT_CMD_FR |
SATA_PORT_CMD_FRE | SATA_PORT_CMD_ST)) {
/*
* System software places a Port into the idle state by
* clearing P#CMD.ST and waiting for P#CMD.CR to return
* 0 when read.
*/
tmp &= ~SATA_PORT_CMD_ST;
writel_with_flush(tmp, &(port_mmio->cmd));
/*
* spec says 500 msecs for each bit, so
* this is slightly incorrect.
*/
mdelay(500);
timeout = 1000;
while ((readl(&(port_mmio->cmd)) & SATA_PORT_CMD_CR)
&& --timeout)
;
if (timeout <= 0) {
debug("port reset failed (0x%x)\n", tmp);
return -1;
}
}
/* Spin-up device */
tmp = readl(&(port_mmio->cmd));
writel((tmp | SATA_PORT_CMD_SUD), &(port_mmio->cmd));
/* Wait for spin-up to finish */
timeout = 1000;
while (!(readl(&(port_mmio->cmd)) | SATA_PORT_CMD_SUD)
&& --timeout)
;
if (timeout <= 0) {
debug("Spin-Up can't finish!\n");
return -1;
}
for (j = 0; j < 100; ++j) {
mdelay(10);
tmp = readl(&(port_mmio->ssts));
if (((tmp & SATA_PORT_SSTS_DET_MASK) == 0x3) ||
((tmp & SATA_PORT_SSTS_DET_MASK) == 0x1))
break;
}
/* Wait for COMINIT bit 26 (DIAG_X) in SERR */
timeout = 1000;
while (!(readl(&(port_mmio->serr)) | SATA_PORT_SERR_DIAG_X)
&& --timeout)
;
if (timeout <= 0) {
debug("Can't find DIAG_X set!\n");
return -1;
}
/*
* For each implemented Port, clear the P#SERR
* register, by writing ones to each implemented\
* bit location.
*/
tmp = readl(&(port_mmio->serr));
debug("P#SERR 0x%x\n",
tmp);
writel(tmp, &(port_mmio->serr));
/* Ack any pending irq events for this port */
tmp = readl(&(host_mmio->is));
debug("IS 0x%x\n", tmp);
if (tmp)
writel(tmp, &(host_mmio->is));
writel(1 << i, &(host_mmio->is));
/* set irq mask (enables interrupts) */
writel(DEF_PORT_IRQ, &(port_mmio->ie));
/* register linkup ports */
tmp = readl(&(port_mmio->ssts));
debug("Port %d status: 0x%x\n", i, tmp);
if ((tmp & SATA_PORT_SSTS_DET_MASK) == 0x03)
probe_ent->link_port_map |= (0x01 << i);
}
tmp = readl(&(host_mmio->ghc));
debug("GHC 0x%x\n", tmp);
writel(tmp | SATA_HOST_GHC_IE, &(host_mmio->ghc));
tmp = readl(&(host_mmio->ghc));
debug("GHC 0x%x\n", tmp);
return 0;
}
static void ahci_print_info(struct ahci_probe_ent *probe_ent)
{
struct sata_host_regs *host_mmio =
(struct sata_host_regs *)probe_ent->mmio_base;
u32 vers, cap, impl, speed;
const char *speed_s;
const char *scc_s;
vers = readl(&(host_mmio->vs));
cap = probe_ent->cap;
impl = probe_ent->port_map;
speed = (cap & SATA_HOST_CAP_ISS_MASK)
>> SATA_HOST_CAP_ISS_OFFSET;
if (speed == 1)
speed_s = "1.5";
else if (speed == 2)
speed_s = "3";
else
speed_s = "?";
scc_s = "SATA";
printf("AHCI %02x%02x.%02x%02x "
"%u slots %u ports %s Gbps 0x%x impl %s mode\n",
(vers >> 24) & 0xff,
(vers >> 16) & 0xff,
(vers >> 8) & 0xff,
vers & 0xff,
((cap >> 8) & 0x1f) + 1,
(cap & 0x1f) + 1,
speed_s,
impl,
scc_s);
printf("flags: "
"%s%s%s%s%s%s"
"%s%s%s%s%s%s%s\n",
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
cap & (1 << 28) ? "ilck " : "",
cap & (1 << 27) ? "stag " : "",
cap & (1 << 26) ? "pm " : "",
cap & (1 << 25) ? "led " : "",
cap & (1 << 24) ? "clo " : "",
cap & (1 << 19) ? "nz " : "",
cap & (1 << 18) ? "only " : "",
cap & (1 << 17) ? "pmp " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
cap & (1 << 13) ? "part " : "");
}
static int ahci_init_one(int pdev)
{
int rc;
struct ahci_probe_ent *probe_ent = NULL;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->dev = pdev;
probe_ent->host_flags = ATA_FLAG_SATA
| ATA_FLAG_NO_LEGACY
| ATA_FLAG_MMIO
| ATA_FLAG_PIO_DMA
| ATA_FLAG_NO_ATAPI;
probe_ent->mmio_base = CONFIG_DWC_AHSATA_BASE_ADDR;
/* initialize adapter */
rc = ahci_host_init(probe_ent);
if (rc)
goto err_out;
ahci_print_info(probe_ent);
/* Save the private struct to block device struct */
sata_dev_desc[pdev].priv = (void *)probe_ent;
return 0;
err_out:
return rc;
}
static int ahci_fill_sg(struct ahci_probe_ent *probe_ent,
u8 port, unsigned char *buf, int buf_len)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
u32 sg_count, max_bytes;
int i;
max_bytes = MAX_DATA_BYTES_PER_SG;
sg_count = ((buf_len - 1) / max_bytes) + 1;
if (sg_count > AHCI_MAX_SG) {
printf("Error:Too much sg!\n");
return -1;
}
for (i = 0; i < sg_count; i++) {
ahci_sg->addr =
cpu_to_le32((u32)buf + i * max_bytes);
ahci_sg->addr_hi = 0;
ahci_sg->flags_size = cpu_to_le32(0x3fffff &
(buf_len < max_bytes
? (buf_len - 1)
: (max_bytes - 1)));
ahci_sg++;
buf_len -= max_bytes;
}
return sg_count;
}
static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 cmd_slot, u32 opts)
{
struct ahci_cmd_hdr *cmd_hdr = (struct ahci_cmd_hdr *)(pp->cmd_slot +
AHCI_CMD_SLOT_SZ * cmd_slot);
memset(cmd_hdr, 0, AHCI_CMD_SLOT_SZ);
cmd_hdr->opts = cpu_to_le32(opts);
cmd_hdr->status = 0;
cmd_hdr->tbl_addr = cpu_to_le32(pp->cmd_tbl & 0xffffffff);
cmd_hdr->tbl_addr_hi = 0;
}
#define AHCI_GET_CMD_SLOT(c) ((c) ? ffs(c) : 0)
static int ahci_exec_ata_cmd(struct ahci_probe_ent *probe_ent,
u8 port, struct sata_fis_h2d *cfis,
u8 *buf, u32 buf_len, s32 is_write)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
struct sata_port_regs *port_mmio =
(struct sata_port_regs *)pp->port_mmio;
u32 opts;
int sg_count = 0, cmd_slot = 0;
cmd_slot = AHCI_GET_CMD_SLOT(readl(&(port_mmio->ci)));
if (32 == cmd_slot) {
printf("Can't find empty command slot!\n");
return 0;
}
/* Check xfer length */
if (buf_len > MAX_BYTES_PER_TRANS) {
printf("Max transfer length is %dB\n\r",
MAX_BYTES_PER_TRANS);
return 0;
}
memcpy((u8 *)(pp->cmd_tbl), cfis, sizeof(struct sata_fis_h2d));
if (buf && buf_len)
sg_count = ahci_fill_sg(probe_ent, port, buf, buf_len);
opts = (sizeof(struct sata_fis_h2d) >> 2) | (sg_count << 16);
if (is_write) {
opts |= 0x40;
flush_cache((ulong)buf, buf_len);
}
ahci_fill_cmd_slot(pp, cmd_slot, opts);
flush_cache((int)(pp->cmd_slot), AHCI_PORT_PRIV_DMA_SZ);
writel_with_flush(1 << cmd_slot, &(port_mmio->ci));
if (waiting_for_cmd_completed((u8 *)&(port_mmio->ci),
10000, 0x1 << cmd_slot)) {
printf("timeout exit!\n");
return -1;
}
invalidate_dcache_range((int)(pp->cmd_slot),
(int)(pp->cmd_slot)+AHCI_PORT_PRIV_DMA_SZ);
debug("ahci_exec_ata_cmd: %d byte transferred.\n",
pp->cmd_slot->status);
if (!is_write)
invalidate_dcache_range((ulong)buf, (ulong)buf+buf_len);
return buf_len;
}
static void ahci_set_feature(u8 dev, u8 port)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 1 << 7;
cfis->command = ATA_CMD_SET_FEATURES;
cfis->features = SETFEATURES_XFER;
cfis->sector_count = ffs(probe_ent->udma_mask + 1) + 0x3e;
ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, READ_CMD);
}
static int ahci_port_start(struct ahci_probe_ent *probe_ent,
u8 port)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
struct sata_port_regs *port_mmio =
(struct sata_port_regs *)pp->port_mmio;
u32 port_status;
u32 mem;
int timeout = 10000000;
debug("Enter start port: %d\n", port);
port_status = readl(&(port_mmio->ssts));
debug("Port %d status: %x\n", port, port_status);
if ((port_status & 0xf) != 0x03) {
printf("No Link on this port!\n");
return -1;
}
mem = (u32)malloc(AHCI_PORT_PRIV_DMA_SZ + 1024);
if (!mem) {
free(pp);
printf("No mem for table!\n");
return -ENOMEM;
}
mem = (mem + 0x400) & (~0x3ff); /* Aligned to 1024-bytes */
memset((u8 *)mem, 0, AHCI_PORT_PRIV_DMA_SZ);
/*
* First item in chunk of DMA memory: 32-slot command table,
* 32 bytes each in size
*/
pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
debug("cmd_slot = 0x%x\n", (unsigned int) pp->cmd_slot);
mem += (AHCI_CMD_SLOT_SZ * DWC_AHSATA_MAX_CMD_SLOTS);
/*
* Second item: Received-FIS area, 256-Byte aligned
*/
pp->rx_fis = mem;
mem += AHCI_RX_FIS_SZ;
/*
* Third item: data area for storing a single command
* and its scatter-gather table
*/
pp->cmd_tbl = mem;
debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
mem += AHCI_CMD_TBL_HDR;
writel_with_flush(0x00004444, &(port_mmio->dmacr));
pp->cmd_tbl_sg = (struct ahci_sg *)mem;
writel_with_flush((u32)pp->cmd_slot, &(port_mmio->clb));
writel_with_flush(pp->rx_fis, &(port_mmio->fb));
/* Enable FRE */
writel_with_flush((SATA_PORT_CMD_FRE | readl(&(port_mmio->cmd))),
&(port_mmio->cmd));
/* Wait device ready */
while ((readl(&(port_mmio->tfd)) & (SATA_PORT_TFD_STS_ERR |
SATA_PORT_TFD_STS_DRQ | SATA_PORT_TFD_STS_BSY))
&& --timeout)
;
if (timeout <= 0) {
debug("Device not ready for BSY, DRQ and"
"ERR in TFD!\n");
return -1;
}
writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
PORT_CMD_START, &(port_mmio->cmd));
debug("Exit start port %d\n", port);
return 0;
}
int init_sata(int dev)
{
int i;
u32 linkmap;
struct ahci_probe_ent *probe_ent = NULL;
if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
printf("The sata index %d is out of ranges\n\r", dev);
return -1;
}
ahci_init_one(dev);
probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
linkmap = probe_ent->link_port_map;
if (0 == linkmap) {
printf("No port device detected!\n");
return 1;
}
for (i = 0; i < probe_ent->n_ports; i++) {
if ((linkmap >> i) && ((linkmap >> i) & 0x01)) {
if (ahci_port_start(probe_ent, (u8)i)) {
printf("Can not start port %d\n", i);
return 1;
}
probe_ent->hard_port_no = i;
break;
}
}
return 0;
}
static void dwc_ahsata_print_info(int dev)
{
block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
printf("SATA Device Info:\n\r");
#ifdef CONFIG_SYS_64BIT_LBA
printf("S/N: %s\n\rProduct model number: %s\n\r"
"Firmware version: %s\n\rCapacity: %lld sectors\n\r",
pdev->product, pdev->vendor, pdev->revision, pdev->lba);
#else
printf("S/N: %s\n\rProduct model number: %s\n\r"
"Firmware version: %s\n\rCapacity: %ld sectors\n\r",
pdev->product, pdev->vendor, pdev->revision, pdev->lba);
#endif
}
static void dwc_ahsata_identify(int dev, u16 *id)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 0x80; /* is command */
cfis->command = ATA_CMD_ID_ATA;
ahci_exec_ata_cmd(probe_ent, port, cfis,
(u8 *)id, ATA_ID_WORDS * 2, READ_CMD);
ata_swap_buf_le16(id, ATA_ID_WORDS);
}
static void dwc_ahsata_xfer_mode(int dev, u16 *id)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
probe_ent->pio_mask = id[ATA_ID_PIO_MODES];
probe_ent->udma_mask = id[ATA_ID_UDMA_MODES];
debug("pio %04x, udma %04x\n\r",
probe_ent->pio_mask, probe_ent->udma_mask);
}
static u32 dwc_ahsata_rw_cmd(int dev, u32 start, u32 blkcnt,
u8 *buffer, int is_write)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
u32 block;
block = start;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 0x80; /* is command */
cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
cfis->device = ATA_LBA;
cfis->device |= (block >> 24) & 0xf;
cfis->lba_high = (block >> 16) & 0xff;
cfis->lba_mid = (block >> 8) & 0xff;
cfis->lba_low = block & 0xff;
cfis->sector_count = (u8)(blkcnt & 0xff);
if (ahci_exec_ata_cmd(probe_ent, port, cfis,
buffer, ATA_SECT_SIZE * blkcnt, is_write) > 0)
return blkcnt;
else
return 0;
}
void dwc_ahsata_flush_cache(int dev)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 0x80; /* is command */
cfis->command = ATA_CMD_FLUSH;
ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, 0);
}
static u32 dwc_ahsata_rw_cmd_ext(int dev, u32 start, lbaint_t blkcnt,
u8 *buffer, int is_write)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
u64 block;
block = (u64)start;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 0x80; /* is command */
cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
: ATA_CMD_READ_EXT;
cfis->lba_high_exp = (block >> 40) & 0xff;
cfis->lba_mid_exp = (block >> 32) & 0xff;
cfis->lba_low_exp = (block >> 24) & 0xff;
cfis->lba_high = (block >> 16) & 0xff;
cfis->lba_mid = (block >> 8) & 0xff;
cfis->lba_low = block & 0xff;
cfis->device = ATA_LBA;
cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
cfis->sector_count = blkcnt & 0xff;
if (ahci_exec_ata_cmd(probe_ent, port, cfis, buffer,
ATA_SECT_SIZE * blkcnt, is_write) > 0)
return blkcnt;
else
return 0;
}
u32 dwc_ahsata_rw_ncq_cmd(int dev, u32 start, lbaint_t blkcnt,
u8 *buffer, int is_write)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
u64 block;
if (sata_dev_desc[dev].lba48 != 1) {
printf("execute FPDMA command on non-LBA48 hard disk\n\r");
return -1;
}
block = (u64)start;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 0x80; /* is command */
cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
: ATA_CMD_FPDMA_READ;
cfis->lba_high_exp = (block >> 40) & 0xff;
cfis->lba_mid_exp = (block >> 32) & 0xff;
cfis->lba_low_exp = (block >> 24) & 0xff;
cfis->lba_high = (block >> 16) & 0xff;
cfis->lba_mid = (block >> 8) & 0xff;
cfis->lba_low = block & 0xff;
cfis->device = ATA_LBA;
cfis->features_exp = (blkcnt >> 8) & 0xff;
cfis->features = blkcnt & 0xff;
/* Use the latest queue */
ahci_exec_ata_cmd(probe_ent, port, cfis,
buffer, ATA_SECT_SIZE * blkcnt, is_write);
return blkcnt;
}
void dwc_ahsata_flush_cache_ext(int dev)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
cfis->pm_port_c = 0x80; /* is command */
cfis->command = ATA_CMD_FLUSH_EXT;
ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, 0);
}
static void dwc_ahsata_init_wcache(int dev, u16 *id)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
probe_ent->flags |= SATA_FLAG_WCACHE;
if (ata_id_has_flush(id))
probe_ent->flags |= SATA_FLAG_FLUSH;
if (ata_id_has_flush_ext(id))
probe_ent->flags |= SATA_FLAG_FLUSH_EXT;
}
u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
const void *buffer, int is_write)
{
u32 start, blks;
u8 *addr;
int max_blks;
start = blknr;
blks = blkcnt;
addr = (u8 *)buffer;
max_blks = ATA_MAX_SECTORS_LBA48;
do {
if (blks > max_blks) {
if (max_blks != dwc_ahsata_rw_cmd_ext(dev, start,
max_blks, addr, is_write))
return 0;
start += max_blks;
blks -= max_blks;
addr += ATA_SECT_SIZE * max_blks;
} else {
if (blks != dwc_ahsata_rw_cmd_ext(dev, start,
blks, addr, is_write))
return 0;
start += blks;
blks = 0;
addr += ATA_SECT_SIZE * blks;
}
} while (blks != 0);
return blkcnt;
}
u32 ata_low_level_rw_lba28(int dev, u32 blknr, lbaint_t blkcnt,
const void *buffer, int is_write)
{
u32 start, blks;
u8 *addr;
int max_blks;
start = blknr;
blks = blkcnt;
addr = (u8 *)buffer;
max_blks = ATA_MAX_SECTORS;
do {
if (blks > max_blks) {
if (max_blks != dwc_ahsata_rw_cmd(dev, start,
max_blks, addr, is_write))
return 0;
start += max_blks;
blks -= max_blks;
addr += ATA_SECT_SIZE * max_blks;
} else {
if (blks != dwc_ahsata_rw_cmd(dev, start,
blks, addr, is_write))
return 0;
start += blks;
blks = 0;
addr += ATA_SECT_SIZE * blks;
}
} while (blks != 0);
return blkcnt;
}
/*
* SATA interface between low level driver and command layer
*/
ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
{
u32 rc;
if (sata_dev_desc[dev].lba48)
rc = ata_low_level_rw_lba48(dev, blknr, blkcnt,
buffer, READ_CMD);
else
rc = ata_low_level_rw_lba28(dev, blknr, blkcnt,
buffer, READ_CMD);
return rc;
}
ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
{
u32 rc;
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
u32 flags = probe_ent->flags;
if (sata_dev_desc[dev].lba48) {
rc = ata_low_level_rw_lba48(dev, blknr, blkcnt,
buffer, WRITE_CMD);
if ((flags & SATA_FLAG_WCACHE) &&
(flags & SATA_FLAG_FLUSH_EXT))
dwc_ahsata_flush_cache_ext(dev);
} else {
rc = ata_low_level_rw_lba28(dev, blknr, blkcnt,
buffer, WRITE_CMD);
if ((flags & SATA_FLAG_WCACHE) &&
(flags & SATA_FLAG_FLUSH))
dwc_ahsata_flush_cache(dev);
}
return rc;
}
int scan_sata(int dev)
{
u8 serial[ATA_ID_SERNO_LEN + 1] = { 0 };
u8 firmware[ATA_ID_FW_REV_LEN + 1] = { 0 };
u8 product[ATA_ID_PROD_LEN + 1] = { 0 };
u16 *id;
u64 n_sectors;
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
u8 port = probe_ent->hard_port_no;
block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
id = (u16 *)memalign(ARCH_DMA_MINALIGN,
roundup(ARCH_DMA_MINALIGN,
(ATA_ID_WORDS * 2)));
if (!id) {
printf("id malloc failed\n\r");
return -1;
}
/* Identify device to get information */
dwc_ahsata_identify(dev, id);
/* Serial number */
ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
memcpy(pdev->product, serial, sizeof(serial));
/* Firmware version */
ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
memcpy(pdev->revision, firmware, sizeof(firmware));
/* Product model */
ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
memcpy(pdev->vendor, product, sizeof(product));
/* Totoal sectors */
n_sectors = ata_id_n_sectors(id);
pdev->lba = (u32)n_sectors;
pdev->type = DEV_TYPE_HARDDISK;
pdev->blksz = ATA_SECT_SIZE;
pdev->lun = 0 ;
/* Check if support LBA48 */
if (ata_id_has_lba48(id)) {
pdev->lba48 = 1;
debug("Device support LBA48\n\r");
}
/* Get the NCQ queue depth from device */
probe_ent->flags &= (~SATA_FLAG_Q_DEP_MASK);
probe_ent->flags |= ata_id_queue_depth(id);
/* Get the xfer mode from device */
dwc_ahsata_xfer_mode(dev, id);
/* Get the write cache status from device */
dwc_ahsata_init_wcache(dev, id);
/* Set the xfer mode to highest speed */
ahci_set_feature(dev, port);
free((void *)id);
dwc_ahsata_print_info(dev);
is_ready = 1;
return 0;
}